WARNING - OLD ARCHIVES

This is an archived copy of the Xen.org mailing list, which we have preserved to ensure that existing links to archives are not broken. The live archive, which contains the latest emails, can be found at http://lists.xen.org/
   
 
 
Xen 
 
Home Products Support Community News
 
   
 

xen-users

Re: [Xen-users] No external network for domU's

To: trilok nuwal <tc.nuwal@xxxxxxxxx>
Subject: Re: [Xen-users] No external network for domU's
From: James Drenter <jdrenter@xxxxxxxxxxxxx>
Date: Thu, 23 Aug 2007 12:34:45 -0400
Cc: xen-users@xxxxxxxxxxxxxxxxxxx
Delivery-date: Thu, 23 Aug 2007 09:35:34 -0700
Domainkey-signature: a=rsa-sha1; s=serpent; d=yahoo-inc.com; c=nofws; q=dns; h=message-id:date:from:user-agent:mime-version:to:cc:subject: references:in-reply-to:content-type:content-transfer-encoding; b=B36BM4nSyECjDaaq3xjKk5oAeGISirf56Cv+j6rWoipTeIj4KfheftSnsWVRS0e2
Envelope-to: www-data@xxxxxxxxxxxxxxxxxx
In-reply-to: <f58fc26d0708222304o4b3e55bdrc7d844bfa170f6b4@xxxxxxxxxxxxxx>
List-help: <mailto:xen-users-request@lists.xensource.com?subject=help>
List-id: Xen user discussion <xen-users.lists.xensource.com>
List-post: <mailto:xen-users@lists.xensource.com>
List-subscribe: <http://lists.xensource.com/cgi-bin/mailman/listinfo/xen-users>, <mailto:xen-users-request@lists.xensource.com?subject=subscribe>
List-unsubscribe: <http://lists.xensource.com/cgi-bin/mailman/listinfo/xen-users>, <mailto:xen-users-request@lists.xensource.com?subject=unsubscribe>
References: <46CCF96E.5030001@xxxxxxxxxxxxx> <f58fc26d0708222304o4b3e55bdrc7d844bfa170f6b4@xxxxxxxxxxxxxx>
Sender: xen-users-bounces@xxxxxxxxxxxxxxxxxxx
User-agent: Thunderbird 2.0.0.6 (Windows/20070728)

trilok nuwal wrote:
Did you configure eth0 of domU with mac address mac=00:16:3e:1a:19:23 adress.

If not then please first modify yr /etc/syscongig/network-scripts/ifcfg-eth0. with the above mac as in config file then add proper guest IP and NETASK and gateway same as dom0. then restart the network.

then see ifconfig if yr eth0 is up in domU.

If it is then it should be ok.


Yes, this was already done.  Results of ifconfig:

# ifconfig
eth0      Link encap:Ethernet  HWaddr 00:16:3E:1A:19:23
         inet addr:10.74.154.202  Bcast:10.74.154.255  Mask:255.255.255.0
         inet6 addr: fe80::216:3eff:fe1a:1923/64 Scope:Link
         UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
         RX packets:322 errors:0 dropped:0 overruns:0 frame:0
         TX packets:76 errors:0 dropped:0 overruns:0 carrier:0
         collisions:0 txqueuelen:1000
         RX bytes:60237 (58.8 KiB)  TX bytes:8759 (8.5 KiB)
         Interrupt:11 Base address:0x8000

lo        Link encap:Local Loopback
         inet addr:127.0.0.1  Mask:255.0.0.0
         inet6 addr: ::1/128 Scope:Host
         UP LOOPBACK RUNNING  MTU:16436  Metric:1
         RX packets:1186 errors:0 dropped:0 overruns:0 frame:0
         TX packets:1186 errors:0 dropped:0 overruns:0 carrier:0
         collisions:0 txqueuelen:0
         RX bytes:1334668 (1.2 MiB)  TX bytes:1334668 (1.2 MiB)

if not then you can check roting table into domU.

You prorbably need to configure the IP routing table in domU.
First see the routing atable to dom0 using below command.
#route -v

Then add the entryies for the domU  also.


Also already verified, results of "route -n" from domU:

# route -n
Kernel IP routing table
Destination     Gateway         Genmask         Flags Metric Ref    Use Iface
10.74.154.0     0.0.0.0         255.255.255.0   U     0      0        0 eth0
169.254.0.0     0.0.0.0         255.255.0.0     U     0      0        0 eth0
0.0.0.0         10.74.154.1     0.0.0.0         UG    0      0        0 eth0

This route table is the same as what I get for dom0.  As far as I can tell, 
everything *should* be OK, but it still doesn't work.


Thanks,
Trilok

Thank you.  Any and all help is appreciated!

-- James


On 8/23/07, James Drenter wrote:

    I have been trying to get this to work for several days with no luck...

    I'm using a RHEL5 (x86_64) dom0 with a single, eth0 physical
    device.  I'm trying to add a single domU with a network bridge (the
    default).  I can add the domU OK, but the network on the domU can
    only access the dom0 (anything to the internet fails).  I'm a bit of
    a Xen newbie, but in 3 days of searching on-line, I haven't found
    anything that has helped get this working.

    Basic net settings:
       dom0 IP = 10.74.154.200 <http://10.74.154.200>
       domU IP = 10.74.154.202 <http://10.74.154.202>
       NETMASK (both) = 255.255.255.0 <http://255.255.255.0>
       GATEWAY (both) = 10.74.154.1 <http://10.74.154.1>

    domU vif setting:
       vif = [ 'type=ioemu, mac=00:16:3e:1a:19:23, bridge=xenbr0' ]

    Clean boot of the system with just the dom0 running gives me the
    following "ifconfig" and "brctl show" results:

    # ifconfig
    eth0      Link encap:Ethernet  HWaddr 00:1B:78:6E:67:16
              inet addr:10.74.154.200
    <http://10.74.154.200>  Bcast:10.74.154.255
    <http://10.74.154.255>  Mask:255.255.255.0 <http://255.255.255.0>
              inet6 addr: fe80::21b:78ff:fe6e:6716/64 Scope:Link
              UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
              RX packets:1153 errors:0 dropped:0 overruns:0 frame:0
              TX packets:470 errors:0 dropped:0 overruns:0 carrier:0
              collisions:0 txqueuelen:0
              RX bytes:128479 (125.4 KiB)  TX bytes:58600 (57.2 KiB)

    lo        Link encap:Local Loopback
              inet addr:127.0.0.1 <http://127.0.0.1>  Mask:255.0.0.0
    <http://255.0.0.0>
              inet6 addr: ::1/128 Scope:Host
              UP LOOPBACK RUNNING  MTU:16436  Metric:1
              RX packets:2211 errors:0 dropped:0 overruns:0 frame:0
              TX packets:2211 errors:0 dropped:0 overruns:0 carrier:0
              collisions:0 txqueuelen:0
              RX bytes:2467028 (2.3 MiB)  TX bytes:2467028 (2.3 MiB)

    peth0     Link encap:Ethernet  HWaddr FE:FF:FF:FF:FF:FF
              inet6 addr: fe80::fcff:ffff:feff:ffff/64 Scope:Link
              UP BROADCAST RUNNING NOARP  MTU:1500  Metric:1
              RX packets:1324 errors:0 dropped:0 overruns:0 frame:0
              TX packets:469 errors:0 dropped:0 overruns:0 carrier:0
              collisions:0 txqueuelen:1000
              RX bytes:143989 (140.6 KiB)  TX bytes:60460 (59.0 KiB)
              Interrupt:16

    vif0.0    Link encap:Ethernet  HWaddr FE:FF:FF:FF:FF:FF
              inet6 addr: fe80::fcff:ffff:feff:ffff/64 Scope:Link
              UP BROADCAST RUNNING NOARP  MTU:1500  Metric:1
              RX packets:475 errors:0 dropped:0 overruns:0 frame:0
              TX packets:1154 errors:0 dropped:0 overruns:0 carrier:0
              collisions:0 txqueuelen:0
              RX bytes:60182 (58.7 KiB)  TX bytes:128539 (125.5 KiB)

    xenbr0    Link encap:Ethernet  HWaddr FE:FF:FF:FF:FF:FF
              UP BROADCAST RUNNING NOARP  MTU:1500  Metric:1
              RX packets:603 errors:0 dropped:0 overruns:0 frame:0
              TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
              collisions:0 txqueuelen:0
              RX bytes:57878 (56.5 KiB)  TX bytes:0 (0.0 b)

    # brctl show xenbr0
    bridge name     bridge id               STP enabled     interfaces
    xenbr0          8000.feffffffffff       no              peth0
                                                            vif0.0


    Which seems all well and good, until I start the domU, then they
    change to:

    # ifconfig
    eth0      Link encap:Ethernet  HWaddr 00:1B:78:6E:67:16
              inet addr:10.74.154.200
    <http://10.74.154.200>  Bcast:10.74.154.255
    <http://10.74.154.255>  Mask:255.255.255.0 <http://255.255.255.0>
              inet6 addr: fe80::21b:78ff:fe6e:6716/64 Scope:Link
              UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
              RX packets:5364 errors:0 dropped:0 overruns:0 frame:0
              TX packets:1765 errors:0 dropped:0 overruns:0 carrier:0
              collisions:0 txqueuelen:0
              RX bytes:589948 (576.1 KiB)  TX bytes:251014 (245.1 KiB)

    lo        Link encap:Local Loopback
              inet addr:127.0.0.1 <http://127.0.0.1>  Mask:255.0.0.0
    <http://255.0.0.0>
              inet6 addr: ::1/128 Scope:Host
              UP LOOPBACK RUNNING  MTU:16436  Metric:1
              RX packets:2211 errors:0 dropped:0 overruns:0 frame:0
              TX packets:2211 errors:0 dropped:0 overruns:0 carrier:0
              collisions:0 txqueuelen:0
              RX bytes:2467028 (2.3 MiB)  TX bytes:2467028 (2.3 MiB)

    peth0     Link encap:Ethernet  HWaddr FE:FF:FF:FF:FF:FF
              inet6 addr: fe80::fcff:ffff:feff:ffff/64 Scope:Link
              UP BROADCAST RUNNING NOARP  MTU:1500  Metric:1
              RX packets:6243 errors:0 dropped:0 overruns:0 frame:0
              TX packets:1323 errors:0 dropped:0 overruns:0 carrier:0
              collisions:0 txqueuelen:1000
              RX bytes:646776 (631.6 KiB)  TX bytes:184156 (179.8 KiB)
              Interrupt:16

    tap0      Link encap:Ethernet  HWaddr D6:D9:8F:58:83:79
              inet6 addr: fe80::d4d9:8fff:fe58:8379/64 Scope:Link
              UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
              RX packets:324 errors:0 dropped:0 overruns:0 frame:0
              TX packets:3482 errors:0 dropped:0 overruns:0 carrier:0
              collisions:0 txqueuelen:500
              RX bytes:40371 (39.4 KiB)  TX bytes:424098 (414.1 KiB)

    vif0.0    Link encap:Ethernet  HWaddr FE:FF:FF:FF:FF:FF
              inet6 addr: fe80::fcff:ffff:feff:ffff/64 Scope:Link
              UP BROADCAST RUNNING NOARP  MTU:1500  Metric:1
              RX packets:1770 errors:0 dropped:0 overruns:0 frame:0
              TX packets:5365 errors:0 dropped:0 overruns:0 carrier:0
              collisions:0 txqueuelen:0
              RX bytes:253640 (247.6 KiB)  TX bytes:590008 ( 576.1 KiB)

    vif2.0    Link encap:Ethernet  HWaddr FE:FF:FF:FF:FF:FF
              UP BROADCAST NOARP  MTU:1500  Metric:1
              RX packets:0 errors:0 dropped:0 overruns:0 frame:0
              TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
              collisions:0 txqueuelen:32
              RX bytes:0 (0.0 b)  TX bytes:0 (0.0 b)

    xenbr0    Link encap:Ethernet  HWaddr D6:D9:8F:58:83:79
              UP BROADCAST RUNNING NOARP  MTU:1500  Metric:1
              RX packets:3494 errors:0 dropped:0 overruns:0 frame:0
              TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
              collisions:0 txqueuelen:0
              RX bytes:345978 (337.8 KiB)  TX bytes:0 (0.0 b)

    # brctl show xenbr0
    bridge name     bridge id               STP enabled     interfaces
    xenbr0          8000.d6d98f588379       no              vif2.0
                                                            tap0
                                                            peth0
                                                            vif0.0


    I don't know why it's changing the MAC address for xenbr0.  Should
    it be?  I don't even know where that new MAC address is coming
    from.  Also, the only thing resembling an error in any of the logs
    is in /var/log/messages (and dmesg):

    tun: Universal TUN/TAP device driver, 1.6
    tun: (C) 1999-2004 Max Krasnyansky <maxk@xxxxxxxxxxxx
    <mailto:maxk@xxxxxxxxxxxx>>
    device tap0 entered promiscuous mode
    audit(1187835845.166 :5): dev=tap0 prom=256 old_prom=0 auid=4294967295
    xenbr0: port 3(tap0) entering learning state
    xenbr0: topology change detected, propagating
    xenbr0: port 3(tap0) entering forwarding state
    device vif2.0 entered promiscuous mode
    audit(1187835846.434:6): dev=vif2.0 prom=256 old_prom=0 auid=4294967295
    ADDRCONF(NETDEV_UP): vif2.0: link is not ready

    and that's where it ends.  I'm pretty sure I should see a matching
    "vif2.0: link becomes ready" line, but it never shows up.

    I'm frustrated enough to consider dropping Xen altogether.  If
    anyone has any idea what may be going on, I would greatly appreciate
    any help.

    Regards,
    James

    _______________________________________________
    Xen-users mailing list
    Xen-users@xxxxxxxxxxxxxxxxxxx <mailto:Xen-users@xxxxxxxxxxxxxxxxxxx>
    http://lists.xensource.com/xen-users



_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users

<Prev in Thread] Current Thread [Next in Thread>