When you use broadcom network cards, try the Broadcom drivers instead of the
linux kernel driver.
http://www.broadcom.com/docs/driver_download/NXII/linux-1.5.10c.zip
When you have other network cards, look at this:
http://lists.xensource.com/archives/html/xen-users/2006-05/msg00817.html
or so. You have to make ethtool -K nicX tx off
while nicX is your network adapter or bridge.
Google for that a little more. You can adjust you scripts to do that
automatically on startup.
Hinrich
-----Ursprüngliche Nachricht-----
Von: xen-users-bounces@xxxxxxxxxxxxxxxxxxx
[mailto:xen-users-bounces@xxxxxxxxxxxxxxxxxxx] Im Auftrag von Yongjun Jeon
Gesendet: Monday, July 30, 2007 6:31 PM
An: xen-users@xxxxxxxxxxxxxxxxxxx
Cc: Yongjun Jeon
Betreff: [SPAM] [Xen-users] Xen networking problem
Hi,
I've been googling around for several days now, but with no luck. I'm hoping
someone here might be able to help me out...
I've installed and run Xen 3.0.4 (I need this specific version) with no
problem, and the guests run smoothly; the only problem is that I have never
been able to get the guests to ping the host (Dom0), or vice versa. I cannot
access the internet from the guests, but it works fine on Dom0.
I have only one NIC on Dom0 (eth0) that connects to the internet. Right now
I'm
just trying to get the guests and Dom0 to recognize each other, let alone
guests' internet access.
I've tried network-bridge, network-nat, network-route, and even some custom
scripts such as network-private
(http://lists.xensource.com/archives/html/xen-users/2006-09/msg00925.html)
and
network-virtual (http://en.opensuse.org/Xen3_and_a_Virtual_Network), with no
success. I've tried all I could, but here's one thing I believe is the
problem.
When I run ifconfig on Dom0, I see this on the guest's vif:
vif2.0 Link encap:Ethernet HWaddr FE:FF:FF:FF:FF:FF
UP BROADCAST NOARP MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:32
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
As you can see, I don't see a "RUNNING" flag on guests' vifs.
Can anyone please help me out? I'm completely lost here.
If it helps, I'm running Ubuntu 7.04, and I'm experimenting with an HVM
guest (Windows XP).
Thx,
Jun
_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users
_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users
|
Home