|  |  | 
  
    |  |  | 
 
  |   |  | 
  
    |  |  | 
  
    |  |  | 
  
    |   xen-users
[Xen-users] Problem with network bridge when starting domU 
|   | Hi all, 
 I am new to Xen and I ran into some problem when trying to
 xm create a FC6 domU with Xen 3.1. My dom0 is a FC5 running
 the 2.6.18-xen kernel. This might just be a stupid configuration
 issue that I am not aware of so please bear with me.
 
 Here is what my cfg file looks like:
 
 kernel = "/boot/vmlinuz-2.6.18-xen"
 memory = 256
 name = "fedora.fc6"
 disk = ['file:/home/ljohnson/stuff/xen/fc6/fedora.fc6.img,sda1,w',
 'file:/home/ljohnson/stuff/xen/fc6/fedora.swap,sda2,w']
 root = "/dev/sda1 ro"
 vif = [ '' ]
 
 I was able to start the domain without the virtual nic. However,
 with the vif in the cfg file, I got the following error when
 creating the domain:
 
 Error: Device 0 (vif) could not be connected. Could not find bridge, and none was specified
 
 I have already turned off iptables on my machine and dom0's network
 seems to work fine. I have also tried "vif = [ '', "bridge=xenbr0' ] but
 the same error still shows up. If I set the mac address myself by
 "vif = [ 'mac=00:16:3e:00:00:11, bridge=xenbr0' ]", xm create hangs
 and attempt to switch to the domU's console with "xm consle fedora.fc6"
 also hangs. Any suggestion on where to look ?
 
 The output from brctl show:
 
 bridge name     bridge id               STP enabled     interfaces
 xenbr0             8000.feffffffffff     no                      vif0.0
 &nb!
 sp;    peth0
 
 The output from ifconfig:
 
 eth0   Link encap:Ethernet  HWaddr 00:12:3F:FC:47:AF
 inet addr:192.168.1.100  Bcast:192.168.1.255  Mask:255.255.255.0
 inet6 addr: fe80::212:3fff:fefc:47af/64 Scope:Link
 UP BROADCAST RUNNING MULTICAST  MTU:1492  Metric:1
 RX packets:2224 errors:0 dropped:0 overruns:0 frame:0
 TX packets:2501 errors:0 dropped:0 overruns:0 carrier:0
 collisions:0 txqueuelen:0
 RX bytes:1597004 (1.5 MiB)  TX bytes:444505 (434.0 KiB)
 
 eth1   Link encap:Ethernet  HWaddr 00:13!
 :CE:67:E4:31
 UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
 RX packets:404 errors:0 dropped:0 overruns:0 frame:0
 TX packets:17 errors:0 dropped:0 overruns:0 carrier:0
 collisions:0 txqueuelen:1000
 RX bytes:2236 (2.1 KiB)  TX bytes:220 (220.0 b)
 Interrupt:18 Base address:0x6000 Memory:dfbff000-dfbfffff
 
 lo       Link encap:Local Loopback
 inet addr:127.0.0.1  Mask:255.0.0.0
 inet6 addr: ::1/128 Scope:Host
 UP LOOPBACK RUNNING  MTU:16436  Metric:1
 !
        RX packets:450 errors:0 dropped:0 overruns:0 frame:0
 TX packets:450 errors:0 dropped:0 overruns:0 carrier:0
 collisions:0 txqueuelen:0
 RX bytes:58377 (57.0 KiB)  TX bytes:58377 (57.0 KiB)
 
 peth0   Link encap:Ethernet  HWaddr FE:FF:FF:FF:FF:FF
 inet6 addr: fe80::fcff:ffff:feff:ffff/64 Scope:Link
 UP BROADCAST RUNNING NOARP  MTU:1500  Metric:1
 RX packets:2222 errors:0 dropped:0 overruns:0 frame:0
 TX packets:2504 errors:0 dropped:0 overruns:0 carrier:0
 !
           collisions:0 tx
queuelen:1000
 RX bytes:1606400 (1.5 MiB)  TX bytes:456597 (445.8 KiB)
 Interrupt:16
 
 vif0.0    Link encap:Ethernet  HWaddr FE:FF:FF:FF:FF:FF
 inet6 addr: fe80::fcff:ffff:feff:ffff/64 Scope:Link
 UP BROADCAST RUNNING NOARP  MTU:1500  Metric:1
 RX packets:2501 errors:0 dropped:0 overruns:0 frame:0
 TX packets:2225 errors:0 dropped:0 overruns:0 carrier:0
 collisions:0 txqueuelen:0
 RX!
  bytes:444505 (434.0 KiB)  TX bytes:1597074 (1.5 MiB)
 
 xenbr0    Link encap:Ethernet  HWaddr FE:FF:FF:FF:FF:FF
 UP BROADCAST RUNNING NOARP  MTU:1500  Metric:1
 RX packets:20 errors:0 dropped:0 overruns:0 frame:0
 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
 collisions:0 txqueuelen:0
 RX bytes:2608 (2.5 KiB)  TX bytes:0 (0.0 b)
 
 Regards,
 
 Levin
 
 |  
 _______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users | 
 
| <Prev in Thread] | Current Thread | [Next in Thread> |  | 
[Xen-users] Problem with network bridge when starting domU,
Levin Johnson <=
 |  |  | 
  
    |  |  |