| |
|
 |
|
 |
|
|
|
| |
|
|
xen-users
Re: [Xen-users] xen kernel and e1000 problem
On 1/1/07, Gémes Géza <geza@xxxxxxxxxxxxxxxxxxx> wrote:
Matt Richardson írta:
> On 12/26/06, Gémes Géza <geza@xxxxxxxxxxxxxxxxxxx> wrote:
> <snip>
>> Etch, Xen 3.0/kernel 2.6.18. What should be noted with the bridged setup
>> in Debian you don't try to activate the interfaces at all, just the
>> bridges you've configured on them.
>>
>> Good Luck!
>>
>> Geza
>
> Can you describe this a little more? I noticed this behavior last
> week after installing Etch/Xen. I couldn't get any networking until I
> brought up a DomU, which in turn brought up the bridge.
>
>
I bring up the bridge via /etc/network/interfaces:
auto xenbridge-e1000
iface xenbridge-e1000 inet static
address 172.16.0.2
netmask 255.255.255.0
network 172.16.0.0
bridge_ports eth-e1000
(I've renamed the interfaces via udev, but it should work as well with
bridge_ports eth0, or something like that)
And have in my /etc/xen/xend-config.sxp:
(network-script network-dummy)
Network is working from the bootup regardless of any DomU running or not.
Good Luck!
Geza
That works like a champ, thanks! Now for the hard question: why is
the Debian configuration different from the docs at xensource? I know
my ignorance is showing, but I'm really curious to find out what is
happening behind the scenes.
take care,
--
Matt
_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users
|
|
|
| |
|
Home