|  |  | 
  
    |  |  | 
 
  |   |  | 
  
    |  |  | 
  
    |  |  | 
  
    |   xen-users
RE: [Xen-users] Xen and QNX 
| I'd like to see the rest of the registers at the point of 
the crash, but that probably means hacking the code around a bit... 
   As this is crashing on an Intel processor and early on, it 
may not be a problem that I can help with anyways...    -- Mats 
 
  
  
    
 Mats,   the following is the dmesg, i think that the last couple 
  of lines are the most interesting, trouble is i dont really understand them. 
  any ideas?  __  
  __            
  _____  ___   ____    ____\ \/ /___ _ 
  __   |___ / / _ \ |___ \  |___ \
 \  // _ \ '_ 
  \    |_ \| | | |  __) |__ __) |
 /  \  
  __/ | | |  ___) | |_| | / __/|__/ __/
 /_/\_\___|_| |_| 
  |____(_)___(_)_____| |_____|
      Xen version 3.0.2-2 (xenod@xxxxxxxxxxxx) (gcc version 3.3.3 
  20040412 (Red Hat Linux 3.3.3-7)) Thu Apr 13 17:34:06 BST 2006Latest 
  ChangeSet: Thu Apr 13 15:18:37 2006 +0100 
9617:5802713c159b
   (XEN) Physical RAM map:(XEN)  0000000000000000 - 
  000000000009fc00 (usable)
 (XEN)  000000000009fc00 - 00000000000a0000 
  (reserved)
 (XEN)  00000000000e4000 - 0000000000100000 
  (reserved)
 (XEN)  0000000000100000 - 000000007e7a0000 
  (usable)
 (XEN)  000000007e7a0000 - 000000007e7ae000 (ACPI 
  data)
 (XEN)  000000007e7ae000 - 000000007e7e0000 (ACPI 
  NVS)
 (XEN)  000000007e7e0000 - 000000007e800000 
  (reserved)
 (XEN)  00000000fee00000 - 00000000fee01000 
  (reserved)
 (XEN)  00000000ffb00000 - 0000000100000000 
  (reserved)
 (XEN) System RAM: 2023MB (2071804kB)
 (XEN) Xen heap: 10MB 
  (10572kB)
 (XEN) Using scheduler: Simple EDF Scheduler (sedf)
 (XEN) PAE 
  disabled.
 (XEN) found SMP MP-table at 000ff780
 (XEN) DMI 2.4 
  present.
 (XEN) Using APIC driver default
 (XEN) ACPI: RSDP (v000 
  ACPIAM                                
  ) @ 0x000fa9a0
 (XEN) ACPI: RSDT (v001 A M I  OEMRSDT  0x08000604 
  MSFT 0x00000097) @ 0x7e7a0000
 (XEN) ACPI: FADT (v002 A M I  
  OEMFACP  0x08000604 MSFT 0x00000097) @ 0x7e7a0200
 (XEN) ACPI: MADT 
  (v001 A M I  OEMAPIC  0x08000604 MSFT 0x00000097) @ 
  0x7e7a0390
 (XEN) ACPI: MCFG (v001 A M I  OEMMCFG  0x08000604 MSFT 
  0x00000097) @ 0x7e7a0400
 (XEN) ACPI: OEMB (v001 A M I  AMI_OEM  
  0x08000604 MSFT 0x00000097) @ 0x7e7ae040
 (XEN) ACPI: ASF! (v032 LEGEND 
  I865PASF 0x00000001 INTL 0x20060113) @ 0x7e7a73c0
 (XEN) ACPI: DSDT 
  (v001  A0518 A0518000 0x00000000 INTL 0x20060113) @ 0x00000000
 (XEN) 
  ACPI: Local APIC address 0xfee00000
 (XEN) ACPI: LAPIC (acpi_id[0x01] 
  lapic_id[0x00] enabled)
 (XEN) Processor #0 6:15 APIC version 20
 (XEN) 
  ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
 (XEN) Processor #1 6:15 
  APIC version 20
 (XEN) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] 
  disabled)
 (XEN) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] 
  disabled)
 (XEN) ACPI: IOAPIC (id[0x02] address[0xfec00000] 
  gsi_base[0])
 (XEN) IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, 
  GSI 0-23
 (XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl 
  dfl)
 (XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high 
  level)
 (XEN) ACPI: IRQ0 used by override.
 (XEN) ACPI: IRQ2 used by 
  override.
 (XEN) ACPI: IRQ9 used by override.
 (XEN) Enabling APIC 
  mode:  Flat.  Using 1 I/O APICs
 (XEN) Using ACPI (MADT) for SMP 
  configuration information
 (XEN) Initializing CPU#0
 (XEN) Detected 
  2666.739 MHz processor.
 (XEN) CPU: L1 I cache: 32K, L1 D cache: 
  32K
 (XEN) CPU: Physical Processor ID: 0
 (XEN) CPU: Processor Core ID: 
  0
 (XEN) VMXON is done
 (XEN) Intel machine check architecture 
  supported.
 (XEN) Intel machine check reporting enabled on CPU#0.
 (XEN) 
  CPU0: Intel(R) Core(TM)2 
  CPU          6700  @ 2.66GHz 
  stepping 06
 (XEN) Booting processor 1/1 eip 90000
 (XEN) Initializing 
  CPU#1
 (XEN) CPU: L1 I cache: 32K, L1 D cache: 32K
 (XEN) CPU: Physical 
  Processor ID: 0
 (XEN) CPU: Processor Core ID: 1
 (XEN) VMXON is 
  done
 (XEN) Intel machine check architecture supported.
 (XEN) Intel 
  machine check reporting enabled on CPU#1.
 (XEN) CPU1: Intel(R) Core(TM)2 
  CPU          6700  @ 2.66GHz 
  stepping 06
 (XEN) Total of 2 processors activated.
 (XEN) ENABLING 
  IO-APIC IRQs
 (XEN) ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 
  pin2=-1
 (XEN) checking TSC synchronization across 2 CPUs: passed.
 (XEN) 
  Platform timer is 1.193MHz PIT
 (XEN) Brought up 2 CPUs
 (XEN) Machine 
  check exception polling timer started.
 (XEN) Using IPI Shortcut 
  mode
 (XEN) *** LOADING DOMAIN 0 ***
 (XEN) Domain 0 kernel supports 
  features = { 0000001f }.
 (XEN) Domain 0 kernel requires features = { 
  00000000 }.
 (XEN) PHYSICAL MEMORY ARRANGEMENT:
 (XEN)  Dom0 
  alloc.:   03000000->04000000 (474887 pages to be 
  allocated)
 (XEN) VIRTUAL MEMORY ARRANGEMENT:
 (XEN)  Loaded kernel: 
  c0100000->c044a254
 (XEN)  Init. ramdisk: 
  c044b000->c082da00
 (XEN)  Phys-Mach map: 
  c082e000->c0a01c1c
 (XEN)  Start info:    
  c0a02000->c0a03000
 (XEN)  Page tables:   
  c0a03000->c0a07000
 (XEN)  Boot stack:    
  c0a07000->c0a08000
 (XEN)  
  TOTAL:         
  c0000000->c0c00000
 (XEN)  ENTRY ADDRESS: c0100000
 (XEN) Dom0 has 
  maximum 2 VCPUs
 (XEN) Initrd len 0x3e2a00, start at 0xc044b000
 (XEN) 
  Scrubbing Free RAM: .....................done.
 (XEN) Xen trace buffers: 
  disabled
 (XEN) *** Serial input -> DOM0 (type 'CTRL-a' three times to 
  switch input to Xen).
 (XEN) (GUEST: 1) HVM Loader
 (XEN) (GUEST: 1) 
  Loading ROMBIOS ...
 (XEN) (GUEST: 1) Loading Cirrus VGABIOS ...
 (XEN) 
  (GUEST: 1) Loading VMXAssist ...
 (XEN) (GUEST: 1) VMX go ...
 (XEN) 
  (GUEST: 1) VMXAssist (Apr 13 2006)
 (XEN) (GUEST: 1) Memory size 1024 
  MB
 (XEN) (GUEST: 1) E820 map:
 (XEN) (GUEST: 1) 0000000000000000 - 
  000000000009F800 (RAM)
 (XEN) (GUEST: 1) 000000000009F800 - 00000000000A0000 
  (Reserved)
 (XEN) (GUEST: 1) 00000000000A0000 - 00000000000C0000 (Type 
  16)
 (XEN) (GUEST: 1) 00000000000F0000 - 0000000000100000 
  (Reserved)
 (XEN) (GUEST: 1) 0000000000100000 - 000000003FFFE000 
  (RAM)
 (XEN) (GUEST: 1) 000000003FFFE000 - 000000003FFFF000 (Type 
  18)
 (XEN) (GUEST: 1) 000000003FFFF000 - 0000000040000000 (Type 17)
 (XEN) 
  (GUEST: 1) 0000000040000000 - 0000000040003000 (ACPI NVS)
 (XEN) (GUEST: 1) 
  0000000040003000 - 000000004000D000 (ACPI Data)
 (XEN) (GUEST: 1) 
  00000000FEC00000 - 0000000100000000 (Type 16)
 (XEN) (GUEST: 1)
 (XEN) 
  (GUEST: 1) Start BIOS ...
 (XEN) (GUEST: 1) Starting emulated 16-bit 
  real-mode: ip=F000:FFF0
 (XEN) (GUEST: 1)  rombios.c,v 1.138 2005/05/07 
  15:55:26 vruppert Exp $
 (XEN) HVM_PIT: guest freq in 
  cycles=133336837
 (XEN) (GUEST: 1) Remapping master: ICW2 0x8 -> 
  0x20
 (XEN) (GUEST: 1) Remapping slave: ICW2 0x70 -> 0x28
 (XEN) 
  (GUEST: 1) VGABios $Id: vgabios.c,v 1.61 2005/05/24 16:50:50 vruppert Exp 
  $
 (XEN) (GUEST: 1) HVMAssist BIOS, 1 cpu, $Revision: 1.138 $ $Date: 
  2005/05/07 15:55:26 $
 (XEN) (GUEST: 1)
 (XEN) (GUEST: 1) ata0-0: 
  PCHS=16383/16/63 translation=lba LCHS=1024/255/63
 (XEN) (GUEST: 1) ata0 
  master: QEMU HARDDISK ATA-2 Hard-Disk (10240 MBytes)
 (XEN) (GUEST: 1) 
  ata0  slave: Unknown device
 (XEN) (GUEST: 1) ata1 master: QEMU CD-ROM 
  ATAPI-4 CD-Rom/DVD-Rom
 (XEN) (GUEST: 1) ata1  slave: Unknown 
  device
 (XEN) (GUEST: 1)
 (XEN) (GUEST: 1) Booting from CD-Rom...
 (XEN) 
  (GUEST: 1) Unknown opcode at 0100:00A8=0x10A8
 (XEN) (GUEST: 1) Halt called 
  from %eip 0xD39D1
 
 
 Any chance of a "xm dmesg" output? I suspect, if QNX 
  isn't majorly changed from a few years back, it's using segments where base != 
  0, which is sometimes causing problems in Xen - so it may be ONE of many 
  reasons that it doesn't work.    -- Mats 
 
    
    
    I am trying to get QNX working with Xen. I've 
    going about it in a similar way as installing windows with Xen, but when I 
    start the guest up to install the OS it hangs on the line: 'Hit Esc for .altboot…….'  If anyone has managed to get this working, or has 
    any ideas/advice for me here it would be greatly appreciated!  Bryan  
 ---------------------------------------------------------------------------------------------------------------
 This 
    email and any attachments are confidential and are for the use of the 
    addressee only. If you are not the addressee, you must not use or disclose 
    the contents to any other person. Please immediately notify the sender and 
    delete the email. Statements and opinions expressed here may not represent 
    those of the company.
 Email correspondence is monitored by the 
    company.
 
 The parent company of the Renishaw Group is Renishaw plc, 
    registered in England no. 1106260. Registered Office: New Mills, 
    Wotton-under-Edge, Gloucestershire, GL12 8JR, United Kingdom. Tel +44 (0) 
    1453 
    524524
 ---------------------------------------------------------------------------------------------------------------
 
 _______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users | 
 |  | 
  
    |  |  |