Hello all,
I have now dd'ed the contents of the CD to an ISO file, booted against
this and still the same - nothing - no screen / window.
I have done this with and without sdl.
On doing the XM create image-name, I can see and hear CD and disk i/o and
then all is quiet as if the boot proces was waiting for screen input.
Without a screen / window this is difficult...
Any ideas????????
JC
> All (und Thomas),
>
>
> yes, I do have XTERM and all of the libsdl stuff.
>
> Regards,
>
>
>
> JC
>
>
>
> On Sat, September 16, 2006 16:51, thomas.vonsteiger@xxxxxxxxxx wrote:
>
>> For sdl=1 you need x11 display, to test this type xterm.
>> If you don't have a xterm then you have no display and sdl can't start.
>>
>>
>>
>> Thomas
>>
>>
>>
>>> -----Ursprüngliche Nachricht-----
>>> Von: xen-users-bounces@xxxxxxxxxxxxxxxxxxx [mailto:xen-users-
>>> bounces@xxxxxxxxxxxxxxxxxxx] Im Auftrag von sean@xxxxxxxxxxxxx
>>> Gesendet:
>>> Samstag, 16. September 2006 14:59
>>> An: Z24
>>> Cc: xen-users@xxxxxxxxxxxxxxxxxxx
>>> Betreff: Re: [Xen-users] XEN and Dapper - III
>>>
>>>
>>>
>>> Hello all again..
>>>
>>>
>>>
>>> have created a new disk image again:
>>>
>>> ls /xen-image/mnt -als total 28 4 drwxrwxrwx 2 root root 4096
>>> 2006-09-16 13:50 .
>>> 4 drwxrwxrwx 3 root root 4096 2006-09-12 18:04 ..
>>> 20 -rwxrwxrwx 1 root root 5368710144 2006-09-16 14:08 winxp.img
>>> root@John:~#
>>>
>>>
>>>
>>> ==================================================================
>>> Started the image (winxp) again, using this config file:
>>>
>>>
>>>
>>> acpi=0 kernel = "/usr/lib/xen/boot/hvmloader" builder = 'hvm' name =
>>> "winxpt"
>>> device_model = '/usr/lib/xen/bin/qemu-dm' serial='pty' memory = 512
>>> disk = [ 'file:/xen-image/mnt/winxp.img,ioemu:hda,w' ]
>>> on_poweroff = 'destroy' on_reboot = 'destroy' on_crash =
>>> 'destroy'
>>> cdrom='/dev/hda' # cdrom='/xen-image/mnt/winxp.iso' boot='d' sdl=1
>>> vnc=0 vncviewer=0
>>>
>>> =============================================================
>>> This is view of what is running as per XEN:
>>>
>>>
>>>
>>> root@John:~# xm list
>>> Name ID Mem(MiB) VCPUs State Time(s)
>>> Domain-0 0 512 2 r----- 346.9
>>> winxpt 1 512 1 r----- 2686.1
>>>
>>> ==================================================================
>>>
>>>
>>>
>>> This is an excerpt of XEN DMESG:
>>>
>>>
>>>
>>> (XEN) *** Serial input -> DOM0 (type 'CTRL-a' three times to switch
>>> input to Xen). (XEN) (GUEST: 1) HVM Loader (XEN) (GUEST: 1) Loading
>>> ROMBIOS ...
>>> (XEN) (GUEST: 1) Loading Cirrus VGABIOS ...
>>> (XEN) (GUEST: 1) Loading VMXAssist ...
>>> (XEN) (GUEST: 1) VMX go ...
>>> (XEN) (GUEST: 1) VMXAssist (Apr 13 2006)
>>> (XEN) (GUEST: 1) Memory size 512 MB
>>> (XEN) (GUEST: 1) E820 map:
>>> (XEN) (GUEST: 1) 0000000000000000 - 000000000009F800 (RAM)
>>> (XEN) (GUEST: 1) 000000000009F800 - 00000000000A0000 (Reserved)
>>> (XEN) (GUEST: 1) 00000000000A0000 - 00000000000C0000 (Type 16)
>>> (XEN) (GUEST: 1) 00000000000F0000 - 0000000000100000 (Reserved)
>>> (XEN) (GUEST: 1) 0000000000100000 - 000000001FFFE000 (RAM)
>>> (XEN) (GUEST: 1) 000000001FFFE000 - 000000001FFFF000 (Type 18)
>>> (XEN) (GUEST: 1) 000000001FFFF000 - 0000000020000000 (Type 17)
>>> (XEN) (GUEST: 1) 0000000020000000 - 0000000020003000 (ACPI NVS)
>>> (XEN) (GUEST: 1) 0000000020003000 - 000000002000D000 (ACPI Data)
>>> (XEN) (GUEST: 1) 00000000FEC00000 - 0000000100000000 (Type 16)
>>> (XEN) (GUEST: 1)
>>> (XEN) (GUEST: 1) Start BIOS ...
>>> (XEN) (GUEST: 1) Starting emulated 16-bit real-mode: ip=F000:FFF0
>>> (XEN) (GUEST: 1) rombios.c,v 1.138 2005/05/07 15:55:26 vruppert Exp $
>>> (XEN) HVM_PIT: guest freq in cycles=150682723
>>> (XEN) (GUEST: 1) Remapping master: ICW2 0x8 -> 0x20
>>> (XEN) (GUEST: 1) Remapping slave: ICW2 0x70 -> 0x28
>>> (XEN) (GUEST: 1) VGABios $Id: vgabios.c,v 1.61 2005/05/24 16:50:50
>>> vruppert Exp $ (XEN) (GUEST: 1) HVMAssist BIOS, 1 cpu, $Revision:
>>> 1.138 $
>>> $Date:
>>> 2005/05/07 15:55:26 $
>>> (XEN) (GUEST: 1)
>>> (XEN) (GUEST: 1) ata0-0: PCHS=10402/16/63 translation=lba
>>> LCHS=652/255/63
>>> (XEN) (GUEST: 1) ata0 master: QEMU HARDDISK ATA-2 Hard-Disk (5120
>>> MBytes)
>>> (XEN) (GUEST: 1) ata0 slave: Unknown device
>>> (XEN) (GUEST: 1) ata1 master: QEMU CD-ROM ATAPI-4 CD-Rom/DVD-Rom
>>> (XEN) (GUEST: 1) ata1 slave: Unknown device
>>> (XEN) (GUEST: 1)
>>> (XEN) (GUEST: 1) Booting from CD-Rom...
>>> (XEN) (GUEST: 1) unsupported PCI BIOS function 0x0E
>>> (XEN) (GUEST: 1) int13_harddisk: function 15, unmapped device for
>>> ELDL=81
>>> (XEN) (GUEST: 1) KBD: int09h_handler(): unknown scancode read!
>>> (XEN) HVM_PIT: guest freq in cycles=30179987
>>>
>>>
>>>
>>> =====================================================================
>>> =
>>>
>>>
>>>
>>> The image is just sitting there "doing nothing", I see no screen /
>>> consoles etc.
>>>
>>> Do I have to enable / disable something else? Do I have to do
>>> something with a network interface? I would not think so, as
>>> everything is "local"
>>> at the moment.
>>>
>>> Any pointers / help, much appreciated.
>>>
>>>
>>>
>>>
>>> JC
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>> On Sat, September 16, 2006 12:42, Z24 wrote:
>>>
>>>
>>>>> "DD" also gives me an error:
>>>>>
>>>>>
>>>>>
>>>>>
>>>>> root@John:/xen-image/mnt# dd if=/dev/hda
>>>>> of=/xen-image/mnt/winxp.iso dd: reading `/dev/hda': Input/output
>>>>> error 1190848+0 records in 1190848+0 records out
>>>>> 609714176 bytes (610 MB) copied, 172.029 seconds, 3.5 MB/s
>>>>> root@John:/xen-image/mnt# ls -als
>>>>> total 596020 4 drwxrwxrwx 2 root root 4096 Sep 16 11:50 . 4
>>>>> drwxrwxrwx 3 root root 4096 Sep 12 18:04 .. 596012
>>>>> -rw-r--r-- 1
>>>>> root root 609714176 Sep 16 11:53 winxp.iso
>>>>>
>>>>>
>>>>> Any ideas??
>>>>>
>>>>>
>>>>>
>>>>
>>>> Have you tried to mount winxp.iso to see if the cdrom has been
>>>> copied to it? Don't you have something like /dev/cdrom?
>>>>
>>>>
>>>> If winxp.iso is ok but you get nothing on xm create, make sure you
>>>> have all the required packages installed:
>>>>
>>> http://www.linuxtopia.org/online_books/linux_virtualization/xen_3.0_u
>>> se r_
>>>> guide/linux_virualization_xen_user_66.html#SECTION04310000000000000
>>>> 00
>>>> 0 I had the same problem as yours (no windows opening and no cdrom
>>>> bootup),
>>> I
>>>
>>>
>>>> installed these packages and all worked: * dev86: I compiled
>>>> bin86-0.16.17.tar.gz sources because I didn't find it using
>>>> Synaptic
>>>> or apt-get * sdl and sdl-dev: I compiled SDL-1.2.11 sources because
>>> Synaptic
>>>
>>>
>>>> and apt-get was reporting a dependency error installing
>>>> libsdl1.2-dev package (see Ubuntu forum) * libvncserver: I compiled
>>>> LibVNCServer-0.8.2
>>>> and x11vnc-0.8.2 because I didn't find libvncserver with Synaptic or
>>>> apt-get; I also installed libvncserver-dev using apt-get
>>>>
>>>> --
>>>> Z24
>>>> www.computingart.tk
>>>>
>>>> _______________________________________________
>>>> Xen-users mailing list
>>>> Xen-users@xxxxxxxxxxxxxxxxxxx
>>>> http://lists.xensource.com/xen-users
>>>>
>>>>
>>>>
>>>>
>>>
>>>
>>> John Cassidy (Dipl.-Ingr.)
>>>
>>>
>>>
>>> Berninastrasse 9
>>>
>>>
>>>
>>> 8057 Zuerich
>>>
>>>
>>>
>>> Europe
>>>
>>>
>>>
>>> Telephone: +41 (0) 43 300 4602
>>>
>>>
>>>
>>> Mobile: +41 (0) 79 207 3268
>>>
>>>
>>>
>>>
>>> E-Mail: john.cassidy@xxxxxxxxxxxxxxxx
>>>
>>>
>>>
>>> http://www.JDCassidy.net
>>>
>>>
>>>
>>> http://www.europeunited.org
>>>
>>>
>>>
>>> http://en.wikipedia.org/wiki/Europe_United
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>> _______________________________________________
>>> Xen-users mailing list
>>> Xen-users@xxxxxxxxxxxxxxxxxxx
>>> http://lists.xensource.com/xen-users
>>>
>>>
>>>
>>>
>>> --
>>> No virus found in this incoming message.
>>> Checked by AVG Free Edition.
>>> Version: 7.1.405 / Virus Database: 268.12.4/449 - Release Date:
>>> 15.09.2006
>>>
>>>
>>
>>
>
>
> John Cassidy (Dipl.-Ingr.)
>
>
> Berninastrasse 9
>
>
> 8057 Zuerich
>
>
> Europe
>
>
> Telephone: +41 (0) 43 300 4602
>
>
> Mobile: +41 (0) 79 207 3268
>
>
>
> E-Mail: john.cassidy@xxxxxxxxxxxxxxxx
>
>
> http://www.JDCassidy.net
>
>
> http://www.europeunited.org
>
>
> http://en.wikipedia.org/wiki/Europe_United
>
>
>
>
>
>
>
John Cassidy (Dipl.-Ingr.)
Berninastrasse 9
8057 Zuerich
Europe
Telephone: +41 (0) 43 300 4602
Mobile: +41 (0) 79 207 3268
E-Mail: john.cassidy@xxxxxxxxxxxxxxxx
http://www.JDCassidy.net
http://www.europeunited.org
http://en.wikipedia.org/wiki/Europe_United
_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users
|
Home