Re: [Xen-users] How to set up real network cards?

[Frank Luedke <xen@xxxxxxxxxx>]

  I have tested with 02:00.0 and 05:06.0 but I didn't succeed.
 My config contains pci = [ '02:00.0' ] (or 05:06.0), but not
 even the link of my NIC is coming up.

  I did a a unbind and bind as described in 5.3.1.3 in the manual.
 The ID is showing up in pcislots:

# [root@localhost pciback]# cat /sys/bus/pci/drivers/pciback/slots
0000:05:06.0

  I am running a Fedora Core 5 here. I have edited the xenguest-install
 to include "pci =..." in the auto-generated config. The installer is
 also always creating a random MAC address - maybe this is the problem?
 (I will take a look at this later).

  Any other hints for me?

Thanks
 Frank


Jason wrote:
> I think those first 4 ports should pass thru, but the last ones Im not
> sure about because those appear to be a sub device and I haven't had
> much luck passing just the sub piece.  You should be able to pass
> 1:00.0  or 2:00.0 etc and it should show up as ethX in your DomU at
> which point it is 100% regular linux networking.
> 
> 
> Frank Luedke wrote:
>>   Close :) I have the realtek chipset for Dom0 and I have
>>  Marvell Yukon for the 8 DomU.
>>
>> [...]
>> 01:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8053 PCI-E
>> Gigabit Ethernet Controller (rev 19)
>> 02:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8053 PCI-E
>> Gigabit Ethernet Controller (rev 19)
>> 03:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8053 PCI-E
>> Gigabit Ethernet Controller (rev 19)
>> 04:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8053 PCI-E
>> Gigabit Ethernet Controller (rev 19)
>> 05:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd.
>> RTL-8139/8139C/8139C+ (rev 10)
>> 05:05.0 Ethernet controller: Marvell Technology Group Ltd. 88E8001
>> Gigabit Ethernet Controller (rev 13)
>> 05:06.0 Ethernet controller: Marvell Technology Group Ltd. 88E8001
>> Gigabit Ethernet Controller (rev 13)
>> 05:07.0 Ethernet controller: Marvell Technology Group Ltd. 88E8001
>> Gigabit Ethernet Controller (rev 13)
>> 05:08.0 Ethernet controller: Marvell Technology Group Ltd. 88E8001
>> Gigabit Ethernet Controller (rev 13)
>> [...]
>>
>>   So it should work when I set up my networking as described
>>  in the Manual, 5.3.1 ?
>>
>> .fl

_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users