WARNING - OLD ARCHIVES

This is an archived copy of the Xen.org mailing list, which we have preserved to ensure that existing links to archives are not broken. The live archive, which contains the latest emails, can be found at http://lists.xen.org/
   
 
 
Xen 
 
Home Products Support Community News
 
   
 

xen-users

Re: [Xen-users] Error: Not an HVM capable platform, we stop creating!

To: Luke <secureboot@xxxxxxxxx>
Subject: Re: [Xen-users] Error: Not an HVM capable platform, we stop creating!
From: "Rene Purcell" <rene.purcell@xxxxxxxxx>
Date: Wed, 10 May 2006 09:48:35 -0400
Cc: xen-users@xxxxxxxxxxxxxxxxxxx
Delivery-date: Wed, 10 May 2006 06:49:14 -0700
Domainkey-signature: a=rsa-sha1; q=dns; c=nofws; s=beta; d=gmail.com; h=received:message-id:date:from:to:subject:cc:in-reply-to:mime-version:content-type:references; b=JBJJrS5gxyTrUTQijykjPVflSg3TNXsUc06A2Zk3x5aZMHd4NMa1AoXcXBlk7wXEa7OHWINwe4emPqWuiexqlwKgBqNvg/9F4nUEVw3QNBdz/QyjWVJLI6E74MnGERSfu1zLSmFYRpXCsTbqmf33ArkemNfISB6xVrlvqF0twJA=
Envelope-to: www-data@xxxxxxxxxxxxxxxxxx
In-reply-to: <446107B2.3010803@xxxxxxxxx>
List-help: <mailto:xen-users-request@lists.xensource.com?subject=help>
List-id: Xen user discussion <xen-users.lists.xensource.com>
List-post: <mailto:xen-users@lists.xensource.com>
List-subscribe: <http://lists.xensource.com/cgi-bin/mailman/listinfo/xen-users>, <mailto:xen-users-request@lists.xensource.com?subject=subscribe>
List-unsubscribe: <http://lists.xensource.com/cgi-bin/mailman/listinfo/xen-users>, <mailto:xen-users-request@lists.xensource.com?subject=unsubscribe>
References: <446107B2.3010803@xxxxxxxxx>
Sender: xen-users-bounces@xxxxxxxxxxxxxxxxxxx
yup it's a common error VT need to be enabled in BIOS ;) it wasn't in mine, by default..

On 5/9/06, Luke <secureboot@xxxxxxxxx > wrote:
I'm getting this error:
Error: Not an HVM capable platform, we stop creating!

when trying to start an unmodified guest domain.

This is after getting the latest xen-unstable, running make install, and
booting into the domain.  I've verified that xend is running.  I'm using
Ubuntu Beta 2.

When I try to create an HVM domain.  I see that hvmloader is in the
correct place.

cat /proc/cpuinfo shows vmx as an extension.  This is a Dell 380n
machine, with the latest BIOS (should work, with VT-X).

Any ideas on where to start?

Nothing written in either /var/log/xend.log or /var/log/xend-debug.log
about it either.


Thanks -



I'm using this config:
#  -*- mode: python; -*-
#============================================================================
# Python configuration setup for 'xm create'.
# This script sets the parameters used when a domain is created using
'xm create'.
# You use a separate script for each domain you want to create, or
# you can set the parameters for the domain on the xm command line.
#============================================================================

import os, re
arch = os.uname()[4]
if re.search('64', arch):
    arch_libdir = 'lib64'
else:
    arch_libdir = 'lib'

#----------------------------------------------------------------------------
# Kernel image file.
kernel = "/usr/lib/xen/boot/hvmloader"

# The domain build function. HVM domain uses 'hvm'.
builder='hvm'

# Initial memory allocation (in megabytes) for the new domain.
#
# WARNING: Creating a domain with insufficient memory may cause out of
#          memory errors. The domain needs enough memory to boot kernel
#          and modules. Allocating less than 32MBs is not recommended.
memory = 128

# A name for your domain. All domains must have different names.
name = "ubuntuvmx"

#-----------------------------------------------------------------------------
# the number of cpus guest platform has, default=1
#vcpus=1

# enable/disable HVM guest PAE, default=0 (disabled)
#pae=0

# enable/disable HVM guest ACPI, default=0 (disabled)
#acpi=0

# enable/disable HVM guest APIC, default=0 (disabled)
#apic=0

# List of which CPUS this domain is allowed to use, default Xen picks
#cpus = ""         # leave to Xen to pick
#cpus = "0"        # all vcpus run on CPU0
#cpus = "0-3,5,^1" # run on cpus 0,2,3,5

# Optionally define mac and/or bridge for the network interfaces.
# Random MACs are assigned if not given.
#vif = [ 'type=ioemu, mac=00:16:3e:00:00:11, bridge=xenbr0' ]
# type=ioemu specify the NIC is an ioemu device not netfront
vif = [ 'type=ioemu, bridge=xenbr0' ]
#----------------------------------------------------------------------------
# Define the disk devices you want the domain to have access to, and
# what you want them accessible as.
# Each disk entry is of the form phy:UNAME,DEV,MODE
# where UNAME is the device, DEV is the device name the domain will see,
# and MODE is r for read-only, w for read-write.

disk = [ 'phy:sda5,hda1,w' ]
#disk = [ 'file:/var/images/min-el3-i386.img,ioemu:hda,w' ]

#----------------------------------------------------------------------------
# Configure the behaviour when a domain exits.  There are three 'reasons'
# for a domain to stop: poweroff, reboot, and crash.  For each of these you
# may specify:
#
#   "destroy",        meaning that the domain is cleaned up as normal;
#   "restart",        meaning that a new domain is started in place of
the old
#                     one;
#   "preserve",       meaning that no clean-up is done until the domain is
#                     manually destroyed (using xm destroy, for example); or
#   "rename-restart", meaning that the old domain is not cleaned up, but is
#                     renamed and a new domain started in its place.
#
# The default is
#
#  
#   on_reboot   = 'restart'
#   on_crash    = 'restart'
#
# For backwards compatibility we also support the deprecated option restart
#
# restart = 'onreboot' means
#                            on_reboot   = 'restart'
#                            on_crash    = 'destroy'
#
# restart = 'always'   means
#                            on_reboot   = 'restart'
#                            on_crash    = 'restart'
#
# restart = 'never'    means
#                            on_reboot   = 'destroy'
#                            on_crash    = 'destroy'

#
#on_reboot   = 'restart'
#on_crash    = 'restart'

#============================================================================

# New stuff
device_model = '/usr/' + arch_libdir + '/xen/bin/qemu-dm'

#-----------------------------------------------------------------------------
# Disk image for
cdrom='/home/user/ubuntu-6.06-beta2-live-i386.iso'

#-----------------------------------------------------------------------------
# boot on floppy (a), hard disk (c) or CD-ROM (d)
boot='d'
#-----------------------------------------------------------------------------
#  write to temporary files instead of disk image files
#snapshot=1

#----------------------------------------------------------------------------
# enable SDL library for graphics, default = 0
sdl=0

#----------------------------------------------------------------------------
# enable VNC library for graphics, default = 1
vnc=1

#----------------------------------------------------------------------------
# enable spawning vncviewer(only valid when vnc=1), default = 1
vncviewer=1

#----------------------------------------------------------------------------
# no graphics, use serial port
#nographic=0

#----------------------------------------------------------------------------
# enable stdvga, default = 0 (use cirrus logic device model)
stdvga=0

#-----------------------------------------------------------------------------
#   serial port re-direct to pty deivce, /dev/pts/n
#   then xm console or minicom can connect
serial='pty'

#----------------------------------------------------------------------------
# enable ne2000, default = 0(use pcnet)
ne2000=0


#-----------------------------------------------------------------------------
#   enable audio support
#audio=1


#-----------------------------------------------------------------------------
#    set the real time clock to local time [default=0 i.e. set to utc]
#localtime=1


#-----------------------------------------------------------------------------
#    start in full screen
#full-screen=1

_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users



--

Rene Jr Purcell
418 930-2424
_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users