WARNING - OLD ARCHIVES

This is an archived copy of the Xen.org mailing list, which we have preserved to ensure that existing links to archives are not broken. The live archive, which contains the latest emails, can be found at http://lists.xen.org/
   
 
 
Xen 
 
Home Products Support Community News
 
   
 

xen-users

Re: [Xen-users] RAID card problem

To: xen-users@xxxxxxxxxxxxxxxxxxx
Subject: Re: [Xen-users] RAID card problem
From: Yura Pismerov <y.pismerov@xxxxxxxxxxxxx>
Date: Tue, 09 May 2006 10:37:00 -0400
Delivery-date: Tue, 09 May 2006 07:37:37 -0700
Envelope-to: www-data@xxxxxxxxxxxxxxxxxx
In-reply-to: <44608D6E.7060209@xxxxxxxxxxxxx>
List-help: <mailto:xen-users-request@lists.xensource.com?subject=help>
List-id: Xen user discussion <xen-users.lists.xensource.com>
List-post: <mailto:xen-users@lists.xensource.com>
List-subscribe: <http://lists.xensource.com/cgi-bin/mailman/listinfo/xen-users>, <mailto:xen-users-request@lists.xensource.com?subject=subscribe>
List-unsubscribe: <http://lists.xensource.com/cgi-bin/mailman/listinfo/xen-users>, <mailto:xen-users-request@lists.xensource.com?subject=unsubscribe>
References: <445FCB41.8060408@xxxxxxxxxxxxx> <200605091112.18946.e.bachmann@xxxxxxxx> <44608D6E.7060209@xxxxxxxxxxxxx>
Sender: xen-users-bounces@xxxxxxxxxxxxxxxxxxx
User-agent: Mail/News 1.5 (X11/20060228)
Problem solved. It turned out ACPI support was off in the kernel.  Oops...


Yura Pismerov wrote:
> Thanks for response. I don't have regular (non-RAID) controller so I
> can't verify whether it works or not.
> Also I was not able to find IOMMU option in the BIOS.
> Below is excerpt from dmesg of regular kernel shipped with Debian Etch 
> (2.6.15-1).
> When I boot XEN-enabled kernel (2.6.16) it  stops after the first 2
> lines and does not get to the probe phase.
> Same situation with Adaptec RAID card (aacraid).
> I tried non-PAE Xen and kernel - no difference at this point so I assume
> it has something to do with Xen.
> I am totally puzzled.
>
> megaraid cmm: 2.20.2.6 (Release Date: Mon Mar 7 00:01:03 EST 2005)
> megaraid: 2.20.4.6 (Release Date: Mon Mar 07 12:27:22 EST 2005)
> megaraid: probe new device 0x1000:0x1960:0x1000:0x0520: bus 10:slot 3:func 0
> megaraid: fw version:[1L37] bios version:[G119]
>
>
> Ernst Bachmann wrote:
>   
>> On Tuesday 09 May 2006 00:50, Yura Pismerov wrote:
>>   
>>     
>>>     I have a Quad Opteron machine (Tyan mobo) with 32GB RAM and I can't
>>> to get it to work with a PCI RAID card.
>>> I try it with Xen 3.0.2 (built from the source). I've already tried 2
>>> different cards (Adaptec 2120S and LSI Megaraid).
>>> In both cases the boot process stops once card driver is loaded. It does
>>> not attempt to load scsi_mod and probe the scsi bus.
>>> A non-Xen kernel works fine with those cards on the same hardware.
>>> Any ideas ?
>>>
>>>     
>>>       
>> I'm running a Quad Opteron (Dual-Core) with 16GB Ram on a tyan motherboard 
>> with xen 3.0.2. No troubles so far.
>>
>> Both the on-board LSI SCSI controller and an areca 24xSATA Raid6 controller 
>> work without problems.
>>
>> Do you have IOMMU enabled in the boards BIOS?
>>
>> /Ernst
>>
>> _______________________________________________
>> Xen-users mailing list
>> Xen-users@xxxxxxxxxxxxxxxxxxx
>> http://lists.xensource.com/xen-users
>>   
>>     
>
>
>   


-- 
Yuri Pismerov, System Administrator
Armor Technologies (Canada) Inc.

P: 905 305 1946 (x.3519)
http://www.armorware.net

Privacy Protection Guaranteed!




_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users

<Prev in Thread] Current Thread [Next in Thread>