| |
|
 |
|
 |
|
|
|
| |
|
|
xen-users
[Xen-users] Xen 3.0-8259 hangs on boot with SMP
Fernando Maior wrote:
> On 1/10/06, Michal Ludvig <michal@xxxxxxxx> wrote:
>
>>I've got OpenSUSE 10.0 installed on VIA DP310 board (2xVIA C3 @1GHz).
>>The stock kernel 2.6.13-15.7-smp works just fine but attempting to boot
>>up xen-3.0_7608-2.1 with kernel 2.6.13-15.7-xen hangs up at:
>>ACPI: Assume root bridge [\_SB_.PCI0] segment is 0
>>
>>Full screenshot (err, real screenshot this time :-) is at
>>http://www.logix.cz/michal/etc/dp310_xen.jpg
>>
>>Any ideas what's wrong? Are there any parameters that I should try?
>>
> I wonder if you updated your Xen rpms with the new ones from
> http://www.suse.de/~garloff/linux/xen/RPMs-100/8259/, including
> the kernel. It seems not. And I would recomend it for you.
Just tried build 8259 and no difference. Bootup still hangs at
ACPI: Assume root bridge [\_SB_.PCI0] segment is 0
Even with most of those "failsafe" options (nosmp acpi=off noapic ...)
it hangs, just the last line is a bit different in that case:
PCI: probing PCI hardware (bus 00)
Can I switch on more verbose output? Or should I tweak some BIOS
settings? Or give some parameters to xen-3.0.gz kernel to do ...
iDontKnowWhat?
Thanks!
Michal Ludvig
--
* Personal homepage: http://www.logix.cz/michal
_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users
|
|
|
| |
|
Home
