|  |  | 
  
    |  |  | 
 
  |   |  | 
  
    |  |  | 
  
    |  |  | 
  
    |   xen-users
[Xen-users] Troubleshooting Bridging 
| I can't seem to get dhcp to work for DOMU with bridging like it's
supposed to in the tutorials. Does anyone have a good step-by-step
troubleshooting guide? 
 Here's my setup:
 
 DOM0: SuSE 9.3, firewall disabled
 DOMU: gentoo 2005.1
 DOMU: SuSE 9.3
 
 In dom0, I run the following:
 /etc/xen/scripts/network start
 iptables -P FORWARD ACCEPT
 
 Then I start my two domains. If I assign them static IP's, everything
works fine, but DHCP requests never get a resposne. I have tried it
with and without dhcp="dhcp" in the config file.
 
 `tcpdump -i  xen-br0 -lenx -s 1500 | dhcpdump` or `tcpdump
-i  eth0 -lenx -s 1500 | dhcpdump`  clearly shows a
DHCPREQUEST from the mac address I've assigned to my domu, but I never
get a dhcpreply.
 
 Everthing looks okay in DOM0 as far as I can tell (see below). What else should I check?
 
 dom0:/etc/xen # iptables --list
 Chain INPUT (policy ACCEPT)
 target     prot opt
source              
destination
 
 Chain FORWARD (policy ACCEPT)
 target     prot opt
source              
destination
 ACCEPT     all  -- 
anywhere            
anywhere           
PHYSDEV match --physdev-in eth0
 
 Chain OUTPUT (policy ACCEPT)
 target     prot opt
source              
destination
 dom0:/etc/xen # brctl show
 bridge name     bridge
id              
STP enabled     interfaces
 xen-br0        
8000.00105aac4561      
no             
eth0
 vif7.0
 vif8.0
 dom0:/etc/xen # ifconfig -a
 eth0      Link encap:Ethernet  HWaddr 00:10:5A:AC:45:61
 inet
addr:192.168.109.26  Bcast:192.168.109.255  Mask:255.255.254.0
 inet6 addr: fe80::210:5aff:feac:4561/64 Scope:Link
 UP BROADCAST NOTRAILERS RUNNING MULTICAST  MTU:1500  Metric:1
 RX packets:53322 errors:0 dropped:0 overruns:0 frame:0
 TX packets:34477 errors:0 dropped:0 overruns:0 carrier:0
 collisions:0 txqueuelen:1000
 RX bytes:53151039 (50.6 Mb)  TX bytes:4320684 (4.1 Mb)
 Interrupt:9 Base address:0x1000
 
 lo        Link encap:Local Loopback
 inet addr:127.0.0.1  Mask:255.0.0.0
 inet6 addr: ::1/128 Scope:Host
 UP LOOPBACK RUNNING  MTU:16436  Metric:1
 RX packets:13705 errors:0 dropped:0 overruns:0 frame:0
 TX packets:13705 errors:0 dropped:0 overruns:0 carrier:0
 collisions:0 txqueuelen:0
 RX bytes:1004429 (980.8 Kb)  TX bytes:1004429 (980.8 Kb)
 
 sit0      Link encap:IPv6-in-IPv4
 NOARP  MTU:1480  Metric:1
 RX packets:0 errors:0 dropped:0 overruns:0 frame:0
 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
 collisions:0 txqueuelen:0
 RX bytes:0 (0.0 b)  TX bytes:0 (0.0 b)
 
 vif7.0    Link encap:Ethernet  HWaddr FE:FF:FF:FF:FF:FF
 inet6 addr: fe80::fcff:ffff:feff:ffff/64 Scope:Link
 UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
 RX packets:0 errors:0 dropped:0 overruns:0 frame:0
 TX packets:0 errors:0 dropped:420 overruns:0 carrier:0
 collisions:0 txqueuelen:0
 RX bytes:0 (0.0 b)  TX bytes:0 (0.0 b)
 
 vif8.0    Link encap:Ethernet  HWaddr FE:FF:FF:FF:FF:FF
 inet6 addr: fe80::fcff:ffff:feff:ffff/64 Scope:Link
 UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
 RX packets:0 errors:0 dropped:0 overruns:0 frame:0
 TX packets:0 errors:0 dropped:411 overruns:0 carrier:0
 collisions:0 txqueuelen:0
 RX bytes:0 (0.0 b)  TX bytes:0 (0.0 b)
 
 xen-br0   Link encap:Ethernet  HWaddr 00:10:5A:AC:45:61
 inet
addr:192.168.109.26  Bcast:192.168.109.255 
Mask:255.255.255.255
 inet6 addr: fe80::200:ff:fe00:0/64 Scope:Link
 UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
 RX packets:52126 errors:0 dropped:0 overruns:0 frame:0
 TX packets:33778 errors:0 dropped:0 overruns:0 carrier:0
 collisions:0 txqueuelen:0
 RX bytes:52281788 (49.8 Mb)  TX bytes:4217308 (4.0 Mb)
 
 Any hints?
 
 --
 Adam Carheden
 
 _______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users | 
 
| <Prev in Thread] | Current Thread | [Next in Thread> |  | 
[Xen-users] Troubleshooting Bridging,
Adam Carheden <=
 |  |  | 
  
    |  |  |