Linux version 2.6.5-7.97-smp (geeko@buildhost) (gcc version 3.3.3 (SuSE Linux)) #1 SMP Fri Jul 2 14:21:59 UTC 2004 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000003fff0000 (usable) BIOS-e820: 000000003fff0000 - 000000003ffff000 (ACPI data) BIOS-e820: 000000003ffff000 - 0000000040000000 (ACPI NVS) BIOS-e820: 00000000fec00000 - 00000000fed00000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ffb80000 - 0000000100000000 (reserved) 128MB vmalloc/ioremap area available. 127MB HIGHMEM available. 896MB LOWMEM available. found SMP MP-table at 000ff780 On node 0 totalpages: 262128 DMA zone: 4096 pages, LIFO batch:1 Normal zone: 225280 pages, LIFO batch:16 HighMem zone: 32752 pages, LIFO batch:7 DMI 2.3 present. Using APIC driver default ACPI: RSDP (v000 ACPIAM ) @ 0x000f5020 ACPI: RSDT (v001 A M I OEMRSDT 0x06000408 MSFT 0x00000097) @ 0x3fff0000 ACPI: FADT (v002 A M I OEMFACP 0x06000408 MSFT 0x00000097) @ 0x3fff0200 ACPI: MADT (v001 A M I OEMAPIC 0x06000408 MSFT 0x00000097) @ 0x3fff0300 ACPI: OEMB (v001 A M I OEMBIOS 0x06000408 MSFT 0x00000097) @ 0x3ffff040 ACPI: DSDT (v001 0ABBP 0ABBP003 0x00000003 MSFT 0x0100000d) @ 0x00000000 ACPI: PM-Timer IO Port: 0x408 ACPI: Local APIC address 0xfee00000 ES7000: did not find Unisys ACPI OEM table! ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) Processor #0 15:2 APIC version 20 ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) Processor #1 15:2 APIC version 20 ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled) ACPI: IOAPIC (id[0x02] address[0xfec00000] global_irq_base[0x0]) IOAPIC[0]: Assigned apic_id 2 IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 ACPI: IOAPIC (id[0x03] address[0xfec80000] global_irq_base[0x18]) IOAPIC[1]: Assigned apic_id 3 IOAPIC[1]: apic_id 3, version 32, address 0xfec80000, GSI 24-47 ACPI: IOAPIC (id[0x04] address[0xfec80400] global_irq_base[0x30]) IOAPIC[2]: Assigned apic_id 4 IOAPIC[2]: apic_id 4, version 32, address 0xfec80400, GSI 48-71 ACPI: IOAPIC (id[0x05] address[0xfec81000] global_irq_base[0x48]) IOAPIC[3]: Assigned apic_id 5 IOAPIC[3]: apic_id 5, version 32, address 0xfec81000, GSI 72-95 ACPI: IOAPIC (id[0x06] address[0xfec81400] global_irq_base[0x60]) IOAPIC[4]: Assigned apic_id 6 IOAPIC[4]: apic_id 6, version 32, address 0xfec81400, GSI 96-119 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) Enabling APIC mode: Flat. Using 5 I/O APICs Using ACPI (MADT) for SMP configuration information Built 1 zonelists Kernel command line: root=/dev/md3 vga=0x314 selinux=0 elevator=cfq Initializing CPU#0 PID hash table entries: 4096 (order 12: 32768 bytes) CKRM Initialization ...... Initializing ClassType ........ ...... Initializing ClassType ........ CKRM Initialization done Detected 3067.211 MHz processor. Using tsc for high-res timesource Console: colour dummy device 80x25 Memory: 1033088k/1048512k available (2224k kernel code, 14508k reserved, 760k data, 244k init, 131008k highmem) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay loop... 6045.69 BogoMIPS Security Scaffold v1.0.0 initialized SELinux: Disabled at boot. Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Mount-cache hash table entries: 512 (order: 0, 4096 bytes) CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 CPU: After vendor identify, caps: bfebfbff 00000000 00000000 00000000 CPU: Trace cache: 12K uops, L1 D cache: 8K CPU: L2 cache: 512K CPU: Physical Processor ID: 0 CPU: After all inits, caps: bfebfbff 00000000 00000000 00000080 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU#0: Intel P4/Xeon Extended MCE MSRs (12) available CPU#0: Thermal monitoring enabled Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. CPU0: Intel(R) Xeon(TM) CPU 3.06GHz stepping 09 per-CPU timeslice cutoff: 1462.79 usecs. task migration cache decay timeout: 2 msecs. enabled ExtINT on CPU#0 ESR value before enabling vector: 00000000 ESR value after enabling vector: 00000000 Booting processor 1/1 eip 3000 Initializing CPU#1 masked ExtINT on CPU#1 ESR value before enabling vector: 00000000 ESR value after enabling vector: 00000000 Calibrating delay loop... 6127.61 BogoMIPS CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 CPU: After vendor identify, caps: bfebfbff 00000000 00000000 00000000 CPU: Trace cache: 12K uops, L1 D cache: 8K CPU: L2 cache: 512K CPU: Physical Processor ID: 0 CPU: After all inits, caps: bfebfbff 00000000 00000000 00000080 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#1. CPU#1: Intel P4/Xeon Extended MCE MSRs (12) available CPU#1: Thermal monitoring enabled CPU1: Intel(R) Xeon(TM) CPU 3.06GHz stepping 09 Total of 2 processors activated (12173.31 BogoMIPS). ENABLING IO-APIC IRQs init IO_APIC IRQs IO-APIC (apicid-pin) 2-0, 2-16, 2-17, 2-18, 2-19, 2-20, 2-21, 2-22, 2-23, 3-0, 3-1, 3-2, 3-3, 3-4, 3-5, 3-6, 3-7, 3-8, 3-9, 3-10, 3-11, 3-12, 3-13, 3-14, 3-15, 3-16, 3-17, 3-18, 3-19, 3-20, 3-21, 3-22, 3-23, 4-0, 4-1, 4-2, 4-3, 4-4, 4-5, 4-6, 4-7, 4-8, 4-9, 4-10, 4-11, 4-12, 4-13, 4-14, 4-15, 4-16, 4-17, 4-18, 4-19, 4-20, 4-21, 4-22, 4-23, 5-0, 5-1, 5-2, 5-3, 5-4, 5-5, 5-6, 5-7, 5-8, 5-9, 5-10, 5-11, 5-12, 5-13, 5-14, 5-15, 5-16, 5-17, 5-18, 5-19, 5-20, 5-21, 5-22, 5-23, 6-0, 6-1, 6-2, 6-3, 6-4, 6-5, 6-6, 6-7, 6-8, 6-9, 6-10, 6-11, 6-12, 6-13, 6-14, 6-15, 6-16, 6-17, 6-18, 6-19, 6-20, 6-21, 6-22, 6-23 not connected. ..TIMER: vector=0x31 pin1=2 pin2=-1 Using local APIC timer interrupts. calibrating APIC timer ... ..... CPU clock speed is 3065.0384 MHz. ..... host bus clock speed is 133.0277 MHz. checking TSC synchronization across 2 CPUs: passed. Brought up 2 CPUs checking if image is initramfs...it isn't (no cpio magic); looks like an initrd Looking for DSDT in initrd ...No customized DSDT found in initrd! Freeing initrd memory: 1327k freed NET: Registered protocol family 16 PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=7 PCI: Using configuration type 1 mtrr: v2.0 (20020519) ACPI: Subsystem revision 20040326 ACPI: Interpreter enabled ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (00:00) PCI: Probing PCI hardware (bus 00) Transparent bridge - 0000:00:1e.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P5.P5P6._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P5.P5P7._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2.P2P3._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2.P2P4._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. Linux Plug and Play Support v0.97 (c) Adam Belay 00:00:1f[B] -> 2-17 -> IRQ 17 level low 00:00:1f[A] -> 2-18 -> IRQ 18 level low 00:00:1d[A] -> 2-16 -> IRQ 16 level low 00:00:1d[B] -> 2-19 -> IRQ 19 level low 00:01:08[A] -> 2-20 -> IRQ 20 level low 00:06:03[A] -> 3-0 -> IRQ 24 level low 00:06:03[B] -> 3-1 -> IRQ 25 level low 00:06:03[C] -> 3-2 -> IRQ 26 level low 00:06:03[D] -> 3-3 -> IRQ 27 level low 00:07:01[A] -> 4-0 -> IRQ 48 level low 00:07:01[B] -> 4-1 -> IRQ 49 level low 00:03:03[A] -> 5-0 -> IRQ 72 level low 00:03:03[B] -> 5-1 -> IRQ 73 level low 00:03:03[C] -> 5-2 -> IRQ 74 level low 00:03:03[D] -> 5-3 -> IRQ 75 level low 00:04:03[A] -> 6-0 -> IRQ 96 level low 00:04:03[B] -> 6-1 -> IRQ 97 level low 00:04:03[C] -> 6-2 -> IRQ 98 level low 00:04:03[D] -> 6-3 -> IRQ 99 level low number of MP IRQ sources: 15. number of IO-APIC #2 registers: 24. number of IO-APIC #3 registers: 24. number of IO-APIC #4 registers: 24. number of IO-APIC #5 registers: 24. number of IO-APIC #6 registers: 24. testing the IO APIC....................... IO APIC #2...... .... register #00: 02000000 ....... : physical APIC id: 02 ....... : Delivery Type: 0 ....... : LTS : 0 .... register #01: 00178020 ....... : max redirection entries: 0017 ....... : PRQ implemented: 1 ....... : IO APIC version: 0020 .... register #02: 00000000 ....... : arbitration: 00 .... register #03: 00000001 ....... : Boot DT : 1 .... IRQ redirection table: NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect: 00 000 00 1 0 0 0 0 0 0 00 01 0FF 0F 0 0 0 0 0 1 1 39 02 0FF 0F 0 0 0 0 0 1 1 31 03 0FF 0F 0 0 0 0 0 1 1 41 04 0FF 0F 0 0 0 0 0 1 1 49 05 0FF 0F 0 0 0 0 0 1 1 51 06 0FF 0F 0 0 0 0 0 1 1 59 07 0FF 0F 0 0 0 0 0 1 1 61 08 0FF 0F 0 0 0 0 0 1 1 69 09 0FF 0F 0 1 0 0 0 1 1 71 0a 0FF 0F 0 0 0 0 0 1 1 79 0b 0FF 0F 0 0 0 0 0 1 1 81 0c 0FF 0F 0 0 0 0 0 1 1 89 0d 0FF 0F 0 0 0 0 0 1 1 91 0e 0FF 0F 0 0 0 0 0 1 1 99 0f 0FF 0F 0 0 0 0 0 1 1 A1 10 003 03 1 1 0 1 0 1 1 B9 11 003 03 1 1 0 1 0 1 1 A9 12 003 03 1 1 0 1 0 1 1 B1 13 003 03 1 1 0 1 0 1 1 C1 14 003 03 1 1 0 1 0 1 1 C9 15 000 00 1 0 0 0 0 0 0 00 16 000 00 1 0 0 0 0 0 0 00 17 000 00 1 0 0 0 0 0 0 00 IO APIC #3...... .... register #00: 03000000 ....... : physical APIC id: 03 ....... : Delivery Type: 0 ....... : LTS : 0 .... register #01: 00178020 ....... : max redirection entries: 0017 ....... : PRQ implemented: 1 ....... : IO APIC version: 0020 .... register #02: 03000000 ....... : arbitration: 03 .... register #03: 00000001 ....... : Boot DT : 1 .... IRQ redirection table: NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect: 00 003 03 1 1 0 1 0 1 1 D1 01 003 03 1 1 0 1 0 1 1 D9 02 003 03 1 1 0 1 0 1 1 E1 03 003 03 1 1 0 1 0 1 1 E9 04 000 00 1 0 0 0 0 0 0 00 05 000 00 1 0 0 0 0 0 0 00 06 000 00 1 0 0 0 0 0 0 00 07 000 00 1 0 0 0 0 0 0 00 08 000 00 1 0 0 0 0 0 0 00 09 000 00 1 0 0 0 0 0 0 00 0a 000 00 1 0 0 0 0 0 0 00 0b 000 00 1 0 0 0 0 0 0 00 0c 000 00 1 0 0 0 0 0 0 00 0d 000 00 1 0 0 0 0 0 0 00 0e 000 00 1 0 0 0 0 0 0 00 0f 000 00 1 0 0 0 0 0 0 00 10 000 00 1 0 0 0 0 0 0 00 11 000 00 1 0 0 0 0 0 0 00 12 000 00 1 0 0 0 0 0 0 00 13 000 00 1 0 0 0 0 0 0 00 14 000 00 1 0 0 0 0 0 0 00 15 000 00 1 0 0 0 0 0 0 00 16 000 00 1 0 0 0 0 0 0 00 17 000 00 1 0 0 0 0 0 0 00 IO APIC #4...... .... register #00: 04000000 ....... : physical APIC id: 04 ....... : Delivery Type: 0 ....... : LTS : 0 .... register #01: 00178020 ....... : max redirection entries: 0017 ....... : PRQ implemented: 1 ....... : IO APIC version: 0020 .... register #02: 04000000 ....... : arbitration: 04 .... register #03: 00000001 ....... : Boot DT : 1 .... IRQ redirection table: NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect: 00 003 03 1 1 0 1 0 1 1 32 01 003 03 1 1 0 1 0 1 1 3A 02 000 00 1 0 0 0 0 0 0 00 03 000 00 1 0 0 0 0 0 0 00 04 000 00 1 0 0 0 0 0 0 00 05 000 00 1 0 0 0 0 0 0 00 06 000 00 1 0 0 0 0 0 0 00 07 000 00 1 0 0 0 0 0 0 00 08 000 00 1 0 0 0 0 0 0 00 09 000 00 1 0 0 0 0 0 0 00 0a 000 00 1 0 0 0 0 0 0 00 0b 000 00 1 0 0 0 0 0 0 00 0c 000 00 1 0 0 0 0 0 0 00 0d 000 00 1 0 0 0 0 0 0 00 0e 000 00 1 0 0 0 0 0 0 00 0f 000 00 1 0 0 0 0 0 0 00 10 000 00 1 0 0 0 0 0 0 00 11 000 00 1 0 0 0 0 0 0 00 12 000 00 1 0 0 0 0 0 0 00 13 000 00 1 0 0 0 0 0 0 00 14 000 00 1 0 0 0 0 0 0 00 15 000 00 1 0 0 0 0 0 0 00 16 000 00 1 0 0 0 0 0 0 00 17 000 00 1 0 0 0 0 0 0 00 IO APIC #5...... .... register #00: 05000000 ....... : physical APIC id: 05 ....... : Delivery Type: 0 ....... : LTS : 0 .... register #01: 00178020 ....... : max redirection entries: 0017 ....... : PRQ implemented: 1 ....... : IO APIC version: 0020 .... register #02: 05000000 ....... : arbitration: 05 .... register #03: 00000001 ....... : Boot DT : 1 .... IRQ redirection table: NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect: 00 003 03 1 1 0 1 0 1 1 42 01 003 03 1 1 0 1 0 1 1 4A 02 003 03 1 1 0 1 0 1 1 52 03 003 03 1 1 0 1 0 1 1 5A 04 000 00 1 0 0 0 0 0 0 00 05 000 00 1 0 0 0 0 0 0 00 06 000 00 1 0 0 0 0 0 0 00 07 000 00 1 0 0 0 0 0 0 00 08 000 00 1 0 0 0 0 0 0 00 09 000 00 1 0 0 0 0 0 0 00 0a 000 00 1 0 0 0 0 0 0 00 0b 000 00 1 0 0 0 0 0 0 00 0c 000 00 1 0 0 0 0 0 0 00 0d 000 00 1 0 0 0 0 0 0 00 0e 000 00 1 0 0 0 0 0 0 00 0f 000 00 1 0 0 0 0 0 0 00 10 000 00 1 0 0 0 0 0 0 00 11 000 00 1 0 0 0 0 0 0 00 12 000 00 1 0 0 0 0 0 0 00 13 000 00 1 0 0 0 0 0 0 00 14 000 00 1 0 0 0 0 0 0 00 15 000 00 1 0 0 0 0 0 0 00 16 000 00 1 0 0 0 0 0 0 00 17 000 00 1 0 0 0 0 0 0 00 IO APIC #6...... .... register #00: 06000000 ....... : physical APIC id: 06 ....... : Delivery Type: 0 ....... : LTS : 0 .... register #01: 00178020 ....... : max redirection entries: 0017 ....... : PRQ implemented: 1 ....... : IO APIC version: 0020 .... register #02: 06000000 ....... : arbitration: 06 .... register #03: 00000001 ....... : Boot DT : 1 .... IRQ redirection table: NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect: 00 003 03 1 1 0 1 0 1 1 62 01 003 03 1 1 0 1 0 1 1 6A 02 003 03 1 1 0 1 0 1 1 72 03 003 03 1 1 0 1 0 1 1 7A 04 000 00 1 0 0 0 0 0 0 00 05 000 00 1 0 0 0 0 0 0 00 06 000 00 1 0 0 0 0 0 0 00 07 000 00 1 0 0 0 0 0 0 00 08 000 00 1 0 0 0 0 0 0 00 09 000 00 1 0 0 0 0 0 0 00 0a 000 00 1 0 0 0 0 0 0 00 0b 000 00 1 0 0 0 0 0 0 00 0c 000 00 1 0 0 0 0 0 0 00 0d 000 00 1 0 0 0 0 0 0 00 0e 000 00 1 0 0 0 0 0 0 00 0f 000 00 1 0 0 0 0 0 0 00 10 000 00 1 0 0 0 0 0 0 00 11 000 00 1 0 0 0 0 0 0 00 12 000 00 1 0 0 0 0 0 0 00 13 000 00 1 0 0 0 0 0 0 00 14 000 00 1 0 0 0 0 0 0 00 15 000 00 1 0 0 0 0 0 0 00 16 000 00 1 0 0 0 0 0 0 00 17 000 00 1 0 0 0 0 0 0 00 IRQ to pin mappings: IRQ0 -> 0:2 IRQ1 -> 0:1 IRQ3 -> 0:3 IRQ4 -> 0:4 IRQ5 -> 0:5 IRQ6 -> 0:6 IRQ7 -> 0:7 IRQ8 -> 0:8 IRQ9 -> 0:9 IRQ10 -> 0:10 IRQ11 -> 0:11 IRQ12 -> 0:12 IRQ13 -> 0:13 IRQ14 -> 0:14 IRQ15 -> 0:15 IRQ16 -> 0:16 IRQ17 -> 0:17 IRQ18 -> 0:18 IRQ19 -> 0:19 IRQ20 -> 0:20 IRQ24 -> 1:0 IRQ25 -> 1:1 IRQ26 -> 1:2 IRQ27 -> 1:3 IRQ48 -> 2:0 IRQ49 -> 2:1 IRQ72 -> 3:0 IRQ73 -> 3:1 IRQ74 -> 3:2 IRQ75 -> 3:3 IRQ96 -> 4:0 IRQ97 -> 4:1 IRQ98 -> 4:2 IRQ99 -> 4:3 .................................... done. PCI: Using ACPI for IRQ routing PCI: if you experience problems, try using option 'pci=noacpi' or even 'acpi=off' vesafb: framebuffer at 0xfd000000, mapped to 0xf8809000, size 8128k vesafb: mode is 800x600x16, linelength=1600, pages=7 vesafb: protected mode interface info at c000:4cb8 vesafb: scrolling: redraw vesafb: directcolor: size=0:5:6:5, shift=0:11:5:0 fb0: VESA VGA frame buffer device apm: BIOS not found. Starting balanced_irq Initial HugeTLB pages allocated: 0 highmem bounce pool size: 64 pages VFS: Disk quotas dquot_6.5.1 Initializing Cryptographic API isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found silentjpeg size 28539 bytes,<6>...found (800x600, 18412 bytes, v3). Console: switching to colour frame buffer device 92x32 Real Time Clock Driver v1.12 Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ sharing enabled ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A Using cfq io scheduler Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 RAMDISK driver initialized: 16 RAM disks of 64000K size 1024 blocksize loop: loaded (max 8 devices) Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx ICH3: IDE controller at PCI slot 0000:00:1f.1 PCI: Enabling device 0000:00:1f.1 (0005 -> 0007) ICH3: chipset revision 2 ICH3: not 100% native mode: will probe irqs later ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:DMA, hdd:DMA hda: ST3120026A, ATA DISK drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 hdc: ST3120026A, ATA DISK drive hdd: SAMSUNG CD-R/RW DRIVE SW-252F, ATAPI CD/DVD-ROM drive ide1 at 0x170-0x177,0x376 on irq 15 PDC20268: IDE controller at PCI slot 0000:06:05.0 PDC20268: chipset revision 2 PDC20268: ROM enabled at 0xfe8f8000 PDC20268: 100% native mode on irq 26 ide2: BM-DMA at 0xc400-0xc407, BIOS settings: hde:pio, hdf:pio ide3: BM-DMA at 0xc408-0xc40f, BIOS settings: hdg:pio, hdh:pio hde: ST3120026A, ATA DISK drive hdf: ST3120026A, ATA DISK drive ide2 at 0xcc00-0xcc07,0xc882 on irq 26 hdg: ST3120026A, ATA DISK drive hdh: ST3120026A, ATA DISK drive ide3 at 0xc800-0xc807,0xc482 on irq 26 hda: max request size: 1024KiB hda: 234441648 sectors (120034 MB) w/8192KiB Cache, CHS=16383/255/63, UDMA(100) hda: cache flushes supported hda: hda1 hda2 hda3 hdc: max request size: 1024KiB hdc: 234441648 sectors (120034 MB) w/8192KiB Cache, CHS=16383/255/63, UDMA(33) hdc: cache flushes supported hdc: hdc1 hdc2 hdc3 hde: max request size: 1024KiB hde: 234441648 sectors (120034 MB) w/8192KiB Cache, CHS=16383/255/63, UDMA(100) hde: cache flushes supported hde: hde1 hdf: max request size: 1024KiB hdf: 234441648 sectors (120034 MB) w/8192KiB Cache, CHS=16383/255/63, UDMA(100) hdf: cache flushes supported hdf: hdf1 hdg: max request size: 1024KiB hdg: 234441648 sectors (120034 MB) w/8192KiB Cache, CHS=16383/255/63, UDMA(100) hdg: cache flushes supported hdg: hdg1 hdh: max request size: 1024KiB hdh: 234441648 sectors (120034 MB) w/8192KiB Cache, CHS=16383/255/63, UDMA(100) hdh: cache flushes supported hdh: hdh1 ide-floppy driver 0.99.newide mice: PS/2 mouse device common for all mice input: PC Speaker serio: i8042 AUX port at 0x60,0x64 irq 12 input: PS/2 Logitech Mouse on isa0060/serio1 serio: i8042 KBD port at 0x60,0x64 irq 1 input: AT Translated Set 2 keyboard on isa0060/serio0 md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27 NET: Registered protocol family 2 IP: routing cache hash table of 8192 buckets, 64Kbytes TCP: Hash tables configured (established 262144 bind 65536) NET: Registered protocol family 1 NET: Registered protocol family 8 NET: Registered protocol family 20 ACPI: (supports S0 S1 S5) md: Autodetecting RAID arrays. md: autorun ... md: considering hdh1 ... md: adding hdh1 ... md: adding hdg1 ... md: adding hdf1 ... md: adding hde1 ... md: hdc3 has different UUID to hdh1 md: hdc2 has different UUID to hdh1 md: hdc1 has different UUID to hdh1 md: hda3 has different UUID to hdh1 md: hda2 has different UUID to hdh1 md: hda1 has different UUID to hdh1 md: created md0 md: bind md: bind md: bind md: bind md: running: md: personality 4 is not loaded! md :do_md_run() returned -22 md: md0 stopped. md: unbind md: export_rdev(hdh1) md: unbind md: export_rdev(hdg1) md: unbind md: export_rdev(hdf1) md: unbind md: export_rdev(hde1) md: considering hdc3 ... md: adding hdc3 ... md: hdc2 has different UUID to hdc3 md: hdc1 has different UUID to hdc3 md: adding hda3 ... md: hda2 has different UUID to hdc3 md: hda1 has different UUID to hdc3 md: created md3 md: bind md: bind md: running: md: personality 3 is not loaded! md :do_md_run() returned -22 md: md3 stopped. md: unbind md: export_rdev(hdc3) md: unbind md: export_rdev(hda3) md: considering hdc2 ... md: adding hdc2 ... md: hdc1 has different UUID to hdc2 md: adding hda2 ... md: hda1 has different UUID to hdc2 md: created md2 md: bind md: bind md: running: md: personality 3 is not loaded! md :do_md_run() returned -22 md: md2 stopped. md: unbind md: export_rdev(hdc2) md: unbind md: export_rdev(hda2) md: considering hdc1 ... md: adding hdc1 ... md: adding hda1 ... md: created md1 md: bind md: bind md: running: md: personality 3 is not loaded! md :do_md_run() returned -22 md: md1 stopped. md: unbind md: export_rdev(hdc1) md: unbind md: export_rdev(hda1) md: ... autorun DONE. RAMDISK: Compressed image found at block 0 VFS: Mounted root (ext2 filesystem). device-mapper: 4.1.0-ioctl (2003-12-10) initialised: dm@xxxxxxxxxxxxxx md: raid1 personality registered as nr 3 raid5: measuring checksumming speed 8regs : 3572.000 MB/sec 8regs_prefetch: 2908.000 MB/sec 32regs : 2148.000 MB/sec 32regs_prefetch: 2084.000 MB/sec pIII_sse : 4004.000 MB/sec pII_mmx : 5136.000 MB/sec p5_mmx : 5020.000 MB/sec raid5: using function: pIII_sse (4004.000 MB/sec) md: raid5 personality registered as nr 4 md: Autodetecting RAID arrays. md: autorun ... md: considering hda1 ... md: adding hda1 ... md: adding hdc1 ... md: hda2 has different UUID to hda1 md: hdc2 has different UUID to hda1 md: hda3 has different UUID to hda1 md: hdc3 has different UUID to hda1 md: hde1 has different UUID to hda1 md: hdf1 has different UUID to hda1 md: hdg1 has different UUID to hda1 md: hdh1 has different UUID to hda1 md: created md1 md: bind md: bind md: running: raid1: raid set md1 active with 2 out of 2 mirrors md: considering hda2 ... md: adding hda2 ... md: adding hdc2 ... md: hda3 has different UUID to hda2 md: hdc3 has different UUID to hda2 md: hde1 has different UUID to hda2 md: hdf1 has different UUID to hda2 md: hdg1 has different UUID to hda2 md: hdh1 has different UUID to hda2 md: created md2 md: bind md: bind md: running: raid1: raid set md2 active with 2 out of 2 mirrors md: considering hda3 ... md: adding hda3 ... md: adding hdc3 ... md: hde1 has different UUID to hda3 md: hdf1 has different UUID to hda3 md: hdg1 has different UUID to hda3 md: hdh1 has different UUID to hda3 md: created md3 md: bind md: bind md: running: raid1: raid set md3 active with 2 out of 2 mirrors md: considering hde1 ... md: adding hde1 ... md: adding hdf1 ... md: adding hdg1 ... md: adding hdh1 ... md: created md0 md: bind md: bind md: bind md: bind md: running: raid5: device hde1 operational as raid disk 0 raid5: device hdf1 operational as raid disk 1 raid5: device hdg1 operational as raid disk 2 raid5: device hdh1 operational as raid disk 3 raid5: allocated 4192kB for md0 raid5: raid level 5 set md0 active with 4 out of 4 devices, algorithm 2 RAID5 conf printout: --- rd:4 wd:4 fd:0 disk 0, o:1, dev:hde1 disk 1, o:1, dev:hdf1 disk 2, o:1, dev:hdg1 disk 3, o:1, dev:hdh1 md: ... autorun DONE. ReiserFS: md3: found reiserfs format "3.6" with standard journal ReiserFS: md3: using ordered data mode reiserfs: using flush barriers ReiserFS: md3: journal params: device md3, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 ReiserFS: md3: checking transaction log (md3) ReiserFS: md3: Using r5 hash to sort names VFS: Mounted root (reiserfs filesystem) readonly. Trying to move old root to /initrd ... failed Unmounting old root Trying to free ramdisk memory ... okay Freeing unused kernel memory: 244k freed Adding 1052152k swap on /dev/md2. Priority:42 extents:1 reiserfs: enabling write barrier flush mode md: raidstart(pid 1056) used deprecated START_ARRAY ioctl. This will not be supported beyond 2.6 md: could not lock hde1. md: could not import hde1! md: autostart unknown-block(0,8449) failed! md: raidstart(pid 1056) used deprecated START_ARRAY ioctl. This will not be supported beyond 2.6 md: could not lock hdc1. md: could not import hdc1! md: autostart unknown-block(0,5633) failed! md: raidstart(pid 1056) used deprecated START_ARRAY ioctl. This will not be supported beyond 2.6 md: could not lock hdc2. md: could not import hdc2! md: autostart unknown-block(0,5634) failed! md: could not lock hdc3. md: could not import hdc3! md: autostart unknown-block(0,5635) failed! md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. ReiserFS: md1: found reiserfs format "3.6" with standard journal ReiserFS: md1: using ordered data mode reiserfs: using flush barriers ReiserFS: md1: journal params: device md1, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 ReiserFS: md1: checking transaction log (md1) ReiserFS: md1: Using r5 hash to sort names ReiserFS: dm-4: found reiserfs format "3.6" with standard journal ReiserFS: dm-4: using ordered data mode reiserfs: using flush barriers ReiserFS: dm-4: journal params: device dm-4, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 ReiserFS: dm-4: checking transaction log (dm-4) ReiserFS: dm-4: Using r5 hash to sort names ReiserFS: dm-3: found reiserfs format "3.6" with standard journal ReiserFS: dm-3: using ordered data mode reiserfs: using flush barriers ReiserFS: dm-3: journal params: device dm-3, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 ReiserFS: dm-3: checking transaction log (dm-3) ReiserFS: dm-3: Using r5 hash to sort names ReiserFS: dm-5: found reiserfs format "3.6" with standard journal ReiserFS: dm-5: using ordered data mode reiserfs: using flush barriers ReiserFS: dm-5: journal params: device dm-5, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 ReiserFS: dm-5: checking transaction log (dm-5) ReiserFS: dm-5: Using r5 hash to sort names ReiserFS: dm-1: found reiserfs format "3.6" with standard journal ReiserFS: dm-1: using ordered data mode reiserfs: using flush barriers ReiserFS: dm-1: journal params: device dm-1, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 ReiserFS: dm-1: checking transaction log (dm-1) ReiserFS: dm-1: Using r5 hash to sort names ReiserFS: dm-2: found reiserfs format "3.6" with standard journal ReiserFS: dm-2: using ordered data mode reiserfs: using flush barriers ReiserFS: dm-2: journal params: device dm-2, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 ReiserFS: dm-2: checking transaction log (dm-2) ReiserFS: dm-2: Using r5 hash to sort names ReiserFS: dm-9: found reiserfs format "3.6" with standard journal ReiserFS: dm-9: using ordered data mode reiserfs: using flush barriers ReiserFS: dm-9: journal params: device dm-9, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 ReiserFS: dm-9: checking transaction log (dm-9) ReiserFS: dm-9: Using r5 hash to sort names ReiserFS: dm-6: found reiserfs format "3.6" with standard journal ReiserFS: dm-6: using ordered data mode reiserfs: using flush barriers ReiserFS: dm-6: journal params: device dm-6, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 ReiserFS: dm-6: checking transaction log (dm-6) ReiserFS: dm-6: Using r5 hash to sort names ReiserFS: dm-8: found reiserfs format "3.6" with standard journal ReiserFS: dm-8: using ordered data mode reiserfs: using flush barriers ReiserFS: dm-8: journal params: device dm-8, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 ReiserFS: dm-8: checking transaction log (dm-8) ReiserFS: dm-8: Using r5 hash to sort names ReiserFS: dm-7: found reiserfs format "3.6" with standard journal ReiserFS: dm-7: using ordered data mode reiserfs: using flush barriers ReiserFS: dm-7: journal params: device dm-7, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 ReiserFS: dm-7: checking transaction log (dm-7) ReiserFS: dm-7: Using r5 hash to sort names subfs 0.9 e100: Intel(R) PRO/100 Network Driver, 3.0.17 e100: Copyright(c) 1999-2004 Intel Corporation e100: eth0: e100_probe: addr 0xfe4fe000, irq 19, MAC addr 00:E0:81:2B:15:D1 usbcore: registered new driver usbfs usbcore: registered new driver hub e100: eth0: e100_watchdog: link up, 100Mbps, full-duplex ACPI: Power Button (FF) [PWRF] ACPI: Processor [CPU1] (supports C1, 8 throttling states) ACPI: Processor [CPU2] (supports C1) NET: Registered protocol family 10 IPv6 over IPv4 tunneling driver hda: drive_cmd: status=0x51 { DriveReady SeekComplete Error } hda: drive_cmd: error=0x04 { DriveStatusError } hda: task_no_data_intr: status=0x51 { DriveReady SeekComplete Error } hda: task_no_data_intr: error=0x04 { DriveStatusError } hdc: drive_cmd: status=0x51 { DriveReady SeekComplete Error } hdc: drive_cmd: error=0x04 { DriveStatusError } hdc: task_no_data_intr: status=0x51 { DriveReady SeekComplete Error } hdc: task_no_data_intr: error=0x04 { DriveStatusError } hde: drive_cmd: status=0x51 { DriveReady SeekComplete Error } hde: drive_cmd: error=0x04 { DriveStatusError } hde: task_no_data_intr: status=0x51 { DriveReady SeekComplete Error } hde: task_no_data_intr: error=0x04 { DriveStatusError } hdf: drive_cmd: status=0x51 { DriveReady SeekComplete Error } hdf: drive_cmd: error=0x04 { DriveStatusError } hdf: task_no_data_intr: status=0x51 { DriveReady SeekComplete Error } hdf: task_no_data_intr: error=0x04 { DriveStatusError } hdg: drive_cmd: status=0x51 { DriveReady SeekComplete Error } hdg: drive_cmd: error=0x04 { DriveStatusError } hdg: task_no_data_intr: status=0x51 { DriveReady SeekComplete Error } hdg: task_no_data_intr: error=0x04 { DriveStatusError } hdh: drive_cmd: status=0x51 { DriveReady SeekComplete Error } hdh: drive_cmd: error=0x04 { DriveStatusError } hdh: task_no_data_intr: status=0x51 { DriveReady SeekComplete Error } hdh: task_no_data_intr: error=0x04 { DriveStatusError } hw_random: RNG not detected USB Universal Host Controller Interface driver v2.2 uhci_hcd 0000:00:1d.0: UHCI Host Controller PCI: Setting latency timer of device 0000:00:1d.0 to 64 uhci_hcd 0000:00:1d.0: irq 16, io base 0000ec00 uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 usb usb1: Product: UHCI Host Controller usb usb1: Manufacturer: Linux 2.6.5-7.97-smp uhci_hcd usb usb1: SerialNumber: 0000:00:1d.0 hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected e1000: Ignoring new-style parameters in presence of obsolete ones Intel(R) PRO/1000 Network Driver - version 5.2.39 Copyright (c) 1999-2004 Intel Corporation. e1000: eth1: e1000_probe: Intel(R) PRO/1000 Network Connection e1000: eth2: e1000_probe: Intel(R) PRO/1000 Network Connection Non-volatile memory driver v1.2 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 hdd: ATAPI 1X CD-ROM CD-R/RW CD-MRW drive, 2048kB Cache Uniform CD-ROM driver Revision: 3.20 SCSI subsystem initialized st: Version 20040318, fixed bufsize 32768, s/g segs 256 BIOS EDD facility v0.13 2004-Mar-09, 6 devices found eth0: no IPv6 routers present ReiserFS: dm-10: found reiserfs format "3.6" with standard journal ReiserFS: dm-10: using ordered data mode reiserfs: using flush barriers ReiserFS: dm-10: journal params: device dm-10, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 ReiserFS: dm-10: checking transaction log (dm-10) ReiserFS: dm-10: Using r5 hash to sort names ReiserFS: dm-10: warning: Created .reiserfs_priv on dm-10 - reserved for xattr storage. Installing knfsd (copyright (C) 1996 okir@xxxxxxxxxxxx).