WARNING - OLD ARCHIVES

This is an archived copy of the Xen.org mailing list, which we have preserved to ensure that existing links to archives are not broken. The live archive, which contains the latest emails, can be found at http://lists.xen.org/
   
 
 
Xen 
 
Home Products Support Community News
 
   
 

xen-users

RE: [Xen-users] XEN Network Configuration Problem

To: <xen-users@xxxxxxxxxxxxxxxxxxx>
Subject: RE: [Xen-users] XEN Network Configuration Problem
From: "Michael WALSER" <m.walser@xxxxxxxxxxxxxxxx>
Date: Fri, 28 Oct 2005 23:33:51 +0200
Delivery-date: Fri, 28 Oct 2005 21:26:59 +0000
Envelope-to: www-data@xxxxxxxxxxxxxxxxxxx
List-help: <mailto:xen-users-request@lists.xensource.com?subject=help>
List-id: Xen user discussion <xen-users.lists.xensource.com>
List-post: <mailto:xen-users@lists.xensource.com>
List-subscribe: <http://lists.xensource.com/cgi-bin/mailman/listinfo/xen-users>, <mailto:xen-users-request@lists.xensource.com?subject=subscribe>
List-unsubscribe: <http://lists.xensource.com/cgi-bin/mailman/listinfo/xen-users>, <mailto:xen-users-request@lists.xensource.com?subject=unsubscribe>
Organization: HTL Saalfelden
Sender: xen-users-bounces@xxxxxxxxxxxxxxxxxxx
Thread-index: AcXbiwrqQRc70AjnRsmCMGVKVQ/duAAevpSAAABD5JA=
> Hi Michael,
> 
> there was a long thread "Ideal(istic) xen firewall design" on this list
> which discussed many aspects of these designs.
> 
> Have a look at the archives.
> 
> Dirk
> 
Thanks, I read the Thread. But my problem is not so complicated, I Think.
I did it like Markus:
--> 2 Network-Interfaces (all 2 hidden from dom0 and configured in domU
(PCI-Entry in the Config File (etc/xen/ipcop))
--> 1 (Default Configured) Ethernet-Bride on XEN (2.0.7 Stable) (eth0)
should be the DMZ-Connection (eth1 in the domU).

How can I modify the Interface Numbers. Everything works fine, but the IPCOP
scripts are written as so that eth0 is always the LAN-Interface, but the
Bridge to the DOM0 should have eth1 instead of eth0, because dom0 should be
my DMZ-Host.

That means that I do not change the Bridge-Configuration or anything like
that. I only want to change the name of the interfaces EHT0 <--> ETH1.
But I cannot Modify ETH0 cause it is fixed in domU.

What do I have to change to give the "Bridge" the name eth1 and one of the
configured NICs eth0.

Michael



> Michael WALSER schrieb:
> 
> >Hi,
> >
> >I'm running RedHat Enterprise Linux 4 (RHEL4) on my Server and I use XEN
> for
> >virtualizes my Firewall (based on IP-COP) on the same machine.
> >The problem now is hat XEN associates always eth0 of domU with my NIC
> (eth0)
> >on dom0.
> >When I want to use my dom0 as DMZ host, I have to associate eth0 in my
> dom0
> >with eth1 in my domU as shown below. The eth0 in my domU should be a
> >physical interface in my system.
> >
> >Dom0                         domU
> >Eth0         <--->           eth1
> >                             eth0            <--->   Physical Interface
> >(00:13.0)
> >
> >
> >How can I configure XEN's network in this way?
> >
> >Thanks,
> >Mike
> >
> >
> >_______________________________________________
> >Xen-users mailing list
> >Xen-users@xxxxxxxxxxxxxxxxxxx
> >http://lists.xensource.com/xen-users
> >
> >
> 
> 
> _______________________________________________
> Xen-users mailing list
> Xen-users@xxxxxxxxxxxxxxxxxxx
> http://lists.xensource.com/xen-users


_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users