WARNING - OLD ARCHIVES

This is an archived copy of the Xen.org mailing list, which we have preserved to ensure that existing links to archives are not broken. The live archive, which contains the latest emails, can be found at http://lists.xen.org/
   
 
 
Xen 
 
Home Products Support Community News
 
   
 

xen-users

Re: [Xen-users] xen 3.0 boot problem

Stephan,
        I had the qlogic stuff compiled into the kernel, but here is the lsmod
anyway as well as lspci. I am testing other stuff on that machine, but I
will go ahead and rebuild with qlogic as modules and let you know the
results.

  .githogori.
        

-----------------------------------------
Linux localhost.localdomain 2.6.12-xen0-3.0-gQ-noUSB #3 SMP Fri Oct 7
14:19:38 PDT 2005 i686 i686 i386 GNU/Linux
[root@localhost ~]# lsmod
Module                  Size  Used by
dcdbas                 35740  1
video                  14980  0
thermal                11528  0
processor              16320  1 thermal
fan                     4228  0
button                  5904  0
battery                 8580  0
ac                      4356  0
[root@localhost ~]# lspci
00:00.0 Host bridge: Intel Corp. E7520 Memory Controller Hub (rev 09)
00:02.0 PCI bridge: Intel Corp. E7525/E7520/E7320 PCI Express Port A
(rev 09)
00:04.0 PCI bridge: Intel Corp. E7525/E7520 PCI Express Port B (rev 09)
00:05.0 PCI bridge: Intel Corp. E7520 PCI Express Port B1 (rev 09)
00:06.0 PCI bridge: Intel Corp. E7520 PCI Express Port C (rev 09)
00:1d.0 USB Controller: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB UHCI
Controller #1 (rev 02)
00:1d.1 USB Controller: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB UHCI
Controller #2 (rev 02)
00:1d.2 USB Controller: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB UHCI #3
(rev 02)
00:1d.7 USB Controller: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB2 EHCI
Controller (rev 02)
00:1e.0 PCI bridge: Intel Corp. 82801 PCI Bridge (rev c2)
00:1f.0 ISA bridge: Intel Corp. 82801EB/ER (ICH5/ICH5R) LPC Interface
Bridge (rev 02)
00:1f.1 IDE interface: Intel Corp. 82801EB/ER (ICH5/ICH5R) IDE
Controller (rev 02)
01:00.0 PCI bridge: Intel Corp. 6700PXH PCI Express-to-PCI Bridge A (rev
09)
01:00.2 PCI bridge: Intel Corp. 6700PXH PCI Express-to-PCI Bridge B (rev
09)
02:0b.0 Fibre Channel: QLogic Corp. QLA2312 Fibre Channel Adapter (rev
02)
02:0b.1 Fibre Channel: QLogic Corp. QLA2312 Fibre Channel Adapter (rev
02)
03:05.0 SCSI storage controller: LSI Logic / Symbios Logic 53c1030 PCI-X
Fusion-MPT Dual Ultra320 SCSI (rev 08)
05:00.0 PCI bridge: Intel Corp. 6700PXH PCI Express-to-PCI Bridge A (rev
09)
05:00.2 PCI bridge: Intel Corp. 6700PXH PCI Express-to-PCI Bridge B (rev
09)
06:07.0 Ethernet controller: Intel Corp. 82541GI/PI Gigabit Ethernet
Controller (rev 05)
07:08.0 Ethernet controller: Intel Corp. 82541GI/PI Gigabit Ethernet
Controller (rev 05)
09:0d.0 VGA compatible controller: ATI Technologies Inc Radeon RV100 QY
[Radeon 7000/VE]
[root@localhost
~]#                                                                     

---------------------------------------------------------------
On Mon, 2005-10-10 at 18:32 +0200, Stephan Böni wrote:
> Please, could you tell me the output of your "lsmod". Perhaps there
> are some missing modules to load.
> 
> Thanks
> Stephan
> 
> 
> > -----Ursprüngliche Nachricht-----
> > Von: Githogori Nyangara-Murage [mailto:githogori@xxxxxxxxxxxxx]
> > Gesendet: Freitag, 7. Oktober 2005 09:23
> > An: Ian Pratt
> > Cc: Stephan Böni; xen-users@xxxxxxxxxxxxxxxxxxx;
> > xen-devel@xxxxxxxxxxxxxxxxxxx; ian.pratt@xxxxxxxxxxxx;
> > githogori@xxxxxxxxxxxxx
> > Betreff: RE: [Xen-users] xen 3.0 boot problem
> > 
> > 
> > As I had stated earlier, I have again built Xen-unstable and have it
> > running on a Dell 1850 which has a qla2300 card. In fact 
> > right now it is
> > busy beating up on the storage using ibre channel via the 
> > qla2300. It is
> > on RHEL 4.1, and build against a vanilla Cambridge download, so this
> > should also work on SuSE.
> > 
> > Below is a snippet of my messages file.
> > 
> >  .githogori.
> > 
> > Oct  6 22:19:58 localhost kernel: Red Hat/Adaptec aacraid driver
> > (1.1.2-lk2 Oct  6 2005)
> > Oct  6 22:19:58 localhost kernel: QLogic Fibre Channel HBA Driver
> > Oct  6 22:19:58 localhost kernel: ACPI: PCI Interrupt 
> > 0000:02:0b.0[A] ->
> > GSI 37 (level, low) -> IRQ 37
> > Oct  6 22:19:58 localhost kernel: qla2300 0000:02:0b.0: Found an
> > ISP2312, irq 37, iobase 0xe0002000
> > Oct  6 22:19:58 localhost kernel: scsi0 : qla2xxx
> > Oct  6 22:19:58 localhost kernel: qla2300 0000:02:0b.0: 
> > Configuring PCI
> > space...
> > Oct  6 22:19:58 localhost kernel: qla2300 0000:02:0b.0: 
> > Configure NVRAM
> > parameters...
> > Oct  6 22:19:58 localhost kernel: qla2300 0000:02:0b.0: 
> > Verifying loaded
> > RISC code...
> > Oct  6 22:19:58 localhost kernel: qla2300 0000:02:0b.0: 
> > Waiting for LIP
> > to complete...
> > Oct  6 22:19:58 localhost kernel: qla2300 0000:02:0b.0: Cable is
> > unplugged...
> > Oct  6 22:19:58 localhost kernel: qla2300 0000:02:0b.0:
> > Oct  6 22:19:58 localhost kernel:  QLogic Fibre Channel HBA Driver:
> > 8.00.02b5-k
> > Oct  6 22:19:58 localhost kernel:   QLogic QLA2342 - 133MHz 
> > PCI-X to 2Gb
> > FC, Dual Channel
> > Oct  6 22:19:58 localhost kernel:   ISP2312: PCI-X (133 MHz) @
> > 0000:02:0b.0 hdma-, host#=0, fw=3.03.08 IPX
> > Oct  6 22:19:58 localhost kernel: ACPI: PCI Interrupt 
> > 0000:02:0b.1[B] ->
> > GSI 38 (level, low) -> IRQ 38
> > Oct  6 22:19:58 localhost kernel: qla2300 0000:02:0b.1: Found an
> > ISP2312, irq 38, iobase 0xe0004000
> > Oct  6 22:19:59 localhost kernel: scsi1 : qla2xxx
> > Oct  6 22:19:59 localhost kernel: qla2300 0000:02:0b.1: 
> > Configuring PCI
> > space...
> > Oct  6 22:19:59 localhost kernel: qla2300 0000:02:0b.1: 
> > Configure NVRAM
> > parameters...
> > Oct  6 22:19:59 localhost kernel: qla2300 0000:02:0b.1: 
> > Verifying loaded
> > RISC code...
> > Oct  6 22:19:59 localhost kernel: qla2300 0000:02:0b.1: 
> > Waiting for LIP
> > to complete...
> > Oct  6 22:19:59 localhost kernel: qla2300 0000:02:0b.1: LIP reset
> > occured (f8f7).
> > Oct  6 22:19:59 localhost kernel: qla2300 0000:02:0b.1: LIP occured
> > (f8f7).
> > Oct  6 22:19:59 localhost kernel: qla2300 0000:02:0b.1: LOOP 
> > UP detected
> > (1 Gbps).
> > Oct  6 22:19:59 localhost kernel: qla2300 0000:02:0b.1: Topology -
> > (Loop), Host Loop address 0x7d
> > Oct  6 22:19:59 localhost kernel: qla2300 0000:02:0b.1:
> > Oct  6 22:19:59 localhost kernel:  QLogic Fibre Channel HBA Driver:
> > 8.00.02b5-k
> > Oct  6 22:19:59 localhost kernel:   QLogic QLA2342 - 133MHz 
> > PCI-X to 2Gb
> > FC, Dual Channel
> > Oct  6 22:19:59 localhost kernel:   ISP2312: PCI-X (133 MHz) @
> > 0000:02:0b.1 hdma-, host#=1, fw=3.03.08 IPX
> > Oct  6 22:19:59 localhost kernel: megaraid cmm: 2.20.2.5 
> > (Release Date:
> > Fri Jan 21 00:01:03 EST 2005)
> > Oct  6 22:19:59 localhost kernel: megaraid: 2.20.4.5 (Release 
> > Date: Thu
> > Feb 03 12:27:22 EST 2005)
> > Oct  6 22:19:59 localhost kernel:   Vendor: DGC       Model: RAID 5
> > Rev: 0411
> > Oct  6 22:19:59 localhost kernel:   Type:   Direct-Access
> > ANSI SCSI revision: 02
> > Oct  6 22:19:59 localhost kernel: 3ware Storage Controller 
> > device driver
> > for Linux v1.26.02.001.
> > Oct  6 22:19:59 localhost kernel: SCSI device sda: 68317440 512-byte
> > hdwr sectors (34979 MB)
> > 
> > 
> > On Wed, 2005-10-05 at 21:28 +0100, Ian Pratt wrote:
> > >  Has anyone used xen succefully with a qla2300?
> > > 
> > > What machines have this card?
> > > 
> > > Ian
> > > 
> > > > I've installed Xen 3.0-devel on SUSE Linux without any problems.
> > > > But when i tryed to boot the system, i've got a funny problem:
> > > > 
> > > > qla2300 0000:05:01.0: Found an ISP2312, irq 185, iobase 
> > > > 0xf8812000 qla2300 0000:05:01.0: Configuring PCI space...
> > > > qla2300 0000:05:01.0: Configure NVRAM parameters...
> > > > qla2300 0000:05:01.0: Verifying loaded RISC code...
> > > > qla2300 0000:05:01.0: Waiting for LIP to complete...
> > > > 
> > > > until here all works fine, but then:
> > > > 
> > > > input: PS/2 Generic Mouse on synaptcs-pt/serio0 qla2300 
> > > > 0000:05:01.0: LIP reset occured (f7f7).
> > > > qla2300 0000:05:01.0: LOOP UP detected (2 Gbps).
> > > > qla2300 0000:05:01.0: Topology - (F_Port), Host Loop 
> > address 0xffff
> > > > scsi3 : qla2xxx
> > > > qla2300 0000:04:02.0:
> > > >   QLogic Fibre Channel HBA Driver: 8.01.00b5-k
> > > >   QLogic QLA2340 - 133MHz PCI-X to 2Gb FC, Single Channel
> > > >   ISP2312: PCI-X (100 MHz) @ 0000:05:01.0 hdma+, host#=3,
> > > > fw=3.03.15 IPX
> > > > Loading kernel/fs/reiserfs/reiserfs.ko
> > > > Waiting for device /dev/sda4 to appear: .....not found --- 
> > > > exiting to /bin/sh $
> > > > 
> > > > if i use the standard (bigsmp) kernel the normal massages are:
> > > > 
> > > > SCSI device sda: 41943040 512-byte hdwr sectors (21475 MB) 
> > > > SCSI device sda: drive cache: write back SCSI device sda: 
> > > > 41943040 512-byte hdwr sectors (21475 MB) SCSI device sda: 
> > > > drive cache: write back
> > > >  sda: sda1 sda2 sda3 sda4
> > > > ....usw.
> > > > 
> > > > Well, my qla2300 has the storage attached not a generic mouse.
> > > > Of course it isn't possible to boot from this mouse. :-(
> > > 
> > > 
> > > 
> > > _______________________________________________
> > > Xen-users mailing list
> > > Xen-users@xxxxxxxxxxxxxxxxxxx
> > > http://lists.xensource.com/xen-users
> > 

_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users

<Prev in Thread] Current Thread [Next in Thread>