One of the list members clued me in [offline] regarding needing a
ramdisk - after setting that and configing its network, the suse-based
domain is up!
But the guest domain spits out a ton of errors when booting (colored in
RED) - I don't get any of this when booting this domain directly from GRUB:
Linux version 2.6.11.4-20a-xen (geeko@buildhost) (gcc version 3.3.5
20050117 (prerelease) (SUSE Linux)) #1 Wed Mar 23 21:52:37 UTC 2005
BIOS-provided physical RAM map:
Xen: 0000000000000000 - 0000000010000000 (usable)
0MB HIGHMEM available.
256MB LOWMEM available.
DMI not present.
IRQ lockup detection disabled
Allocating PCI resources starting at 10000000 (gap: 10000000:f0000000)
Built 1 zonelists
Kernel command line: root=/dev/hdb2 ro 3
Initializing CPU#0
PID hash table entries: 2048 (order: 11, 32768 bytes)
Xen reported: 1594.873 MHz processor.
Using tsc for high-res timesource
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Memory: 253056k/262144k available (1876k kernel code, 8808k reserved,
558k data, 128k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Security Framework v1.0.0 initialized
SELinux: Disabled at boot.
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
CPU: Trace cache: 12K uops, L1 D cache: 8K
CPU: L2 cache: 256K
CPU: Intel(R) Pentium(R) 4 CPU 1600MHz stepping 0a
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... disabled
checking if image is initramfs... it is
Freeing initrd memory: 2882k freed
NET: Registered protocol family 16
PCI: Using configuration type Xen
Linux Plug and Play Support v0.97 (c) Adam Belay
xen_mem: Initialising balloon driver.
PCI: Probing PCI hardware
PCI: Probing PCI hardware
PCI: Probing PCI hardware (bus 00)
TC classifier action (bugs to netdev@xxxxxxxxxxx cc hadi@xxxxxxxxxx)
audit: initializing netlink socket (disabled)
audit(1127736003.422:0): initialized
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Initializing Cryptographic API
vesafb: abort, cannot reserve video memory at 0x0
vesafb: abort, cannot ioremap video memory 0x0 @ 0x0
Trying to free nonexistent resource <00000000-ffffffff>
vesafb: probe of vesafb.0 failed with error -5
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
PNP: No PS/2 controller found. Probing ports directly.
i8042.c: No controller found.
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered
RAMDISK driver initialized: 16 RAM disks of 64000K size 1024 blocksize
loop: loaded (max 8 devices)
Xen virtual console successfully installed as tty
Event-channel device installed.
xen_blk: Initialising virtual block device driver
xen_net: Initialising virtual ethernet driver.
mice: PS/2 mouse device common for all mice
NET: Registered protocol family 2
IP: routing cache hash table of 2048 buckets, 16Kbytes
TCP established hash table entries: 16384 (order: 5, 131072 bytes)
TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
TCP: Hash tables configured (established 16384 bind 16384)
NET: Registered protocol family 1
NET: Registered protocol family 8
NET: Registered protocol family 20
Freeing unused kernel memory: 128k freed
Starting udev
Creating devices
Loading kernel/drivers/ide/ide-core.ko
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=xx
Loading kernel/drivers/ide/pci/piix.ko
Loading kernel/drivers/ide/ide-disk.ko
Loading kernel/drivers/cdrom/cdrom.ko
Loading kernel/drivers/ide/ide-cd.ko
Loading kernel/fs/reiserfs/reiserfs.ko
Waiting for device /dev/hdb2 to appear: ok
rootfs: major=3 minor=66 devn=834
fsck 1.36 (05-Feb-2005)
Reiserfs super block in block 16 on 0x342 of format 3.6 with standard
journal
Blocks (total/free): 2357536/2186462 by 4096 bytes
Filesystem is clean
Replaying journal..
Reiserfs journal '/dev/hdb2' in blocks [18..8211]: 0 transactions replayed
Checking internal tree..finished
fsck succeeded. Mounting root device read-write.
Mounting root /dev/hdb2
ReiserFS: hdb2: found reiserfs format "3.6" with standard journal
ReiserFS: hdb2: using ordered data mode
reiserfs: using flush barriers
ReiserFS: hdb2: journal params: device hdb2, size 8192, journal first
block 18, max trans len 1024, max batch 900, max commit age 30, max
trans age 30
ReiserFS: hdb2: checking transaction log (hdb2)
reiserfs: disabling flush barriers on hdb2
ReiserFS: hdb2: Using r5 hash to sort names
Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ sharing enabled
INIT: version 2.85 booting
System Boot Control: Running /etc/init.d/boot
Mounting /proc filesystem done
Mounting sysfs on /sys done
Mounting /dev/pts done
Boot logging started on /dev/tty1(/dev/console) at Mon Sep 26 05:00:18 2005
Mounting shared memory FS on /dev/shm done
Activating swap-devices in /etc/fstab...
Adding 1052216k swap on /dev/hdb1. Priority:42 extents:1 failed
Activating device mapper...
device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@xxxxxxxxxx
Creating /dev/mapper/control character device with major:10 minor:63.
done
Checking file systems...
fsck 1.36 (05-Feb-2005) done
Setting up kernel module dependencies (if required) done
Mounting local file systems...
proc on /proc type proc (rw)
sysfs on /sys type sysfs (rw)
tmpfs on /dev/shm type tmpfs (rw)
devpts on /dev/pts type devpts (rw,mode=0620,gid=5)
nothing was mounted done
Setting up the CMOS clockhwclock is unable to get I/O port access: the
iopl(3) call failed.
hwclock is unable to get I/O port access: the iopl(3) call failed.
failed
Creating /var/log/boot.msg done
Starting udevd done
Capability LSM initialized
Restore device permissions done
ieee1394: raw1394: /dev/raw1394 device initialized
video1394: Installed video1394 module
Loading required kernel modules done
Coldplug
Coldplug: cleaning /events Activating remaining swap-devices in
/etc/failed..
Setting current sysctl status from /etc/sysctl.conf
net.ipv4.icmp_echo_ignore_broadcasts = 1
net.ipv4.conf.all.rp_filter = 1
done
Enabling syn flood protection done
Disabling IP forwarding done
done
lp: driver loaded but no devices found
hwup: Loading module 'lp' for device 'printer'
processing events done
Setting up hostname 'suse' done
Setting up loopback interface lo
lo IP address: 127.0.0.1/8
done
System Boot Control: The system has been set up
System Boot Control: Running /etc/init.d/boot.local done
INIT: Entering runlevel: 3
Boot logging started on /dev/tty1(/dev/console) at Mon Sep 26 05:00:26 2005
Master Resource Control: previous runlevel: N, switching to runlevel:3
Starting D-BUS daemon done
Setting up network interfaces:
lo
lo IP address: 127.0.0.1/8 done
eth0
eth0 No configuration found for eth0 unused
Waiting for mandatory devices: eth-id-00:c0:a8:7c:cf:9b
15 SCSI subsystem initialized
st: Version 20041025, fixed bufsize 32768, s/g segs 256
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
14 13 12 11 10 8 7 Initializing random number generator done
Starting resource manager done
6 5 4 3 2 1 0
eth-id-00:c0:a8:7c:cf:9b No interface found failed
Setting up service network . . . . . . . . . . . . . . failed
Starting syslog services done
Starting RPC portmap daemon done
Importing Net File System (NFS) unused
Starting sound driver: intel8x0 done
Starting nfsboot (sm-notify) done
Starting mail service (Postfix)Starting Name Service Cache DaemonNET:
Registered protocol family 10
Disabled Privacy Extensions on device c032c7a0(lo)
IPv6 over IPv4 tunneling driver
Disabled Privacy Extensions on device cf265400(sit0)
Loading keymap Couldnt open /dev/tty1
Loading /usr/share/kbd/keymaps/i386/qwerty/us.map.gz failed
Loading compose table winkeys shiftctrl latin1.add failed
Start Unicode mode
Couldnt open /dev/tty1
Couldnt open /dev/tty2
Couldnt open /dev/tty3
skipped
Starting powersaved done
Couldnt open /dev/tty4
Couldnt open /dev/tty5
Couldnt open /dev/tty6 failed
Loading console font lat9w-16.psfu -m trivial G0:loadable
Couldnt open /dev/tty1
Couldnt open /dev/tty2
Couldnt open /dev/tty3
Couldnt open /dev/tty4
Couldnt open /dev/tty5
Couldnt open /dev/tty6 failed
Couldnt get a file descriptor referring to the console
done
skipped
Starting hardware scan on bootStarting CRON daemon done
Starting SSH daemon done
Starting HAL daemonNon-volatile memory driver v1.2
done
Starting xend failed
done
Master Resource Control: runlevel 3 has been reached
Failed services in runlevel 3: network kbd xend
Skipped services in runlevel 3: nfs powersaved
Welcome to SuSE Linux 9.3 (i586) - Kernel 2.6.11.4-20a-xen (tty1).
suse login:
Any suggestions?
Thanks!
Kent
_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users
|
Home