|  |  | 
  
    |  |  | 
 
  |   |  | 
  
    |  |  | 
  
    |  |  | 
  
    |   xen-users
[Xen-users] Compiling legacy LSI megaraid drivers (Linux 2.6.11)	with xe 
| 
Hi all,
I've been using Xen for a while and I am trying to install it onto a 
Dell Poweredge 2950.  The 2850 uses a PERC4/Di raid on motherboard, 
which requires the LSI Legacy SCSI Raid driver to be compiled into the 
2.6.11-xen0 kernel.  I've been recompiling the kernel by: 
1. Go into the linux-2.6.11-xen0 directory.  Select the driver using 
"make ARCH=xen menuconfig" and then finding the appropriate menu option 
(CONFIG_MEGARAID_LEGACY=y) 
2.  cd ..
3.  make kernels
At some point....I get the following warnings during compilation:
CC      drivers/scsi/megaraid.o
drivers/scsi/megaraid.c: In function `issue_scb':
drivers/scsi/megaraid.c:1132: warning: passing arg 2 of `writel' makes 
pointer from integer without a cast 
drivers/scsi/megaraid.c: In function `issue_scb_block':
drivers/scsi/megaraid.c:1195: warning: passing arg 2 of `writel' makes 
pointer from integer without a cast
drivers/scsi/megaraid.c:1208: warning: passing arg 2 of `writel' makes 
pointer from integer without a cast
drivers/scsi/megaraid.c:1210: warning: passing arg 1 of `readl' makes 
pointer from integer without a cast 
drivers/scsi/megaraid.c: In function `megaraid_isr_memmapped':
drivers/scsi/megaraid.c:1340: warning: passing arg 1 of `readl' makes 
pointer from integer without a cast
drivers/scsi/megaraid.c:1347: warning: passing arg 2 of `writel' makes 
pointer from integer without a cast
drivers/scsi/megaraid.c:1366: warning: passing arg 2 of `writel' makes 
pointer from integer without a cast
drivers/scsi/megaraid.c:1370: warning: passing arg 1 of `readl' makes 
pointer from integer without a cast 
4.  go into dist/install/boot and copy the kernel to /boot
during boot of the new kernel, I never see the LSI megaraid driver 
load.  I assume that the above errors are symptoms of 
something...anyone have any ideas?  Has anyone had any problems similar 
to this?  I know I can get the RAID driver to cleanly compile and work 
under a non xen kernels.... 
Thanks in advance,
Navid Khalili
_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users
 | 
 
| <Prev in Thread] | Current Thread | [Next in Thread> |  | 
[Xen-users] Compiling legacy LSI megaraid drivers (Linux 2.6.11)	with xen 2.0.7?,
Navid Khalili <=
 |  |  | 
  
    |  |  |