WARNING - OLD ARCHIVES

This is an archived copy of the Xen.org mailing list, which we have preserved to ensure that existing links to archives are not broken. The live archive, which contains the latest emails, can be found at http://lists.xen.org/
   
 
 
Xen 
 
Home Products Support Community News
 
   
 

xen-users

[Xen-users] Network interrupts disable?

Hi all

I got xen-unstable.hg, did a fresh hg pull today(08/01).
Then I built and installed xen-unstable.

I can boot up Xen and Dom0. (DomU didn't create.)
But a network of Dom0 cannot be connected.
How should I do?

I use RTL-8139 network card, and 8139too.

The following message is shown by "dmesg |tail".
======================================================
NETDEV WATCHDOG: eth0: transmit timed out
eth0: Transmit timeout, status 0c 0005 c07f media 10.
eth0: Tx queue start entry 4  dirty entry 0.
eth0:  Tx descriptor 0 is 0008a05b. (queue head)
eth0:  Tx descriptor 1 is 0008a07c.
eth0:  Tx descriptor 2 is 0008a04e.
eth0:  Tx descriptor 3 is 0008a05b.
eth0: link up, 100Mbps, full-duplex, lpa 0x41E1
======================================================

So, I checked /proc/interrupts and network interrupts didn't count. 
======================================================
           CPU0       
  1:          0        Phys-irq  i8042
  8:          0        Phys-irq  rtc
  9:          0        Phys-irq  acpi
 12:          0        Phys-irq  i8042
 14:       3683        Phys-irq  ide0
 15:       1728        Phys-irq  ide1
 17:          0        Phys-irq  yenta, eth0
 18:          0        Phys-irq  SiS SI7012, SiS SI7013 Modem, yenta
 19:          0        Phys-irq  ohci1394
 20:          0        Phys-irq  ohci_hcd:usb2
 21:          0        Phys-irq  ohci_hcd:usb3
 22:          0        Phys-irq  ohci_hcd:usb4
 23:          0        Phys-irq  ehci_hcd:usb1
256:          0     Dynamic-irq  ctrl-if
257:      12811     Dynamic-irq  timer0
258:          0     Dynamic-irq  resched0
259:          0     Dynamic-irq  callfunc0
260:          0     Dynamic-irq  console
261:          0     Dynamic-irq  net-be-dbg
NMI:          0 
LOC:          0 
ERR:          0
MIS:          0
======================================================

Why interrupts of eth0 isn't counted?
Could anyone help me.

The result of lsmod and ifconfig is put as follows. 

    o lsmod
        ======================================================
        Module                  Size  Used by
        md5                     8448  1 
        ipv6                  292928  8 
        autofs4                25604  2 
        rfcomm                 52504  0 
        l2cap                  37120  5 rfcomm
        bluetooth              62468  4 rfcomm,l2cap
        sunrpc                154308  1 
        video                  20740  0 
        thermal                18056  0 
        processor              22944  1 thermal
        fan                     9092  0 
        button                 11024  0 
        battery                13956  0 
        ac                      9220  0 
        ohci1394               42420  0 
        ieee1394              313688  1 ohci1394
        yenta_socket           28168  0 
        rsrc_nonstatic         18816  1 yenta_socket
        pcmcia_core            58276  2 yenta_socket,rsrc_nonstatic
        ohci_hcd               23812  0 
        ehci_hcd               39688  0 
        i2c_sis96x             10116  0 
        i2c_core               27264  1 i2c_sis96x
        snd_intel8x0m          23748  0 
        snd_intel8x0           38336  0 
        snd_ac97_codec         87296  2 snd_intel8x0m,snd_intel8x0
        snd_seq_dummy           8196  0 
        snd_seq_oss            41472  0 
        snd_seq_midi_event     12544  1 snd_seq_oss
        snd_seq                62480  5 snd_seq_dummy,snd_seq_oss,
snd_seq_midi_event
        snd_seq_device         13580  3 snd_seq_dummy,snd_seq_oss,
snd_seq
        snd_pcm_oss            60704  0 
        snd_mixer_oss          25088  1 snd_pcm_oss
        snd_pcm               100228  4 snd_intel8x0m,snd_intel8x0,
snd_ac97_codec,snd_pcm_oss
        snd_timer              31236  2 snd_seq,snd_pcm
        snd                    60260  10 snd_intel8x0m,snd_intel8x0,
snd_ac97_codec,snd_seq_oss,snd_seq,snd_seq_device,snd_pcm_oss,
snd_mixer_oss,snd_pcm,snd_timer
        soundcore              14304  1 snd
        snd_page_alloc         14724  3 snd_intel8x0m,snd_intel8x0,
snd_pcm
        8139too                33152  0 
        mii                    10240  1 8139too
        ext3                  151048  2 
        jbd                    70552  1 ext3
        dm_mod                 67748  1
        ======================================================
        
    o ifconfig -a
        ======================================================
        eth0      Link encap:Ethernet  HWaddr 00:40:D0:34:B8:BC  
                  inet addr:10.124.50.61  Bcast:10.124.50.255  Mask:255.
255.255.0
                  inet6 addr: fe80::240:d0ff:fe34:b8bc/64 Scope:Link
                  UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
                  RX packets:0 errors:0 dropped:0 overruns:0 frame:0
                  TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
                  collisions:0 txqueuelen:1000 
                  RX bytes:0 (0.0 b)  TX bytes:0 (0.0 b)
                  Interrupt:17 Base address:0xe400 

        lo        Link encap:Local Loopback  
                  inet addr:127.0.0.1  Mask:255.0.0.0
                  inet6 addr: ::1/128 Scope:Host
                  UP LOOPBACK RUNNING  MTU:16436  Metric:1
                  RX packets:14 errors:0 dropped:0 overruns:0 frame:0
                  TX packets:14 errors:0 dropped:0 overruns:0 carrier:0
                  collisions:0 txqueuelen:0 
                  RX bytes:1148 (1.1 KiB)  TX bytes:1148 (1.1 KiB)

        sit0      Link encap:IPv6-in-IPv4  
                  NOARP  MTU:1480  Metric:1
                  RX packets:0 errors:0 dropped:0 overruns:0 frame:0
                  TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
                  collisions:0 txqueuelen:0 
                  RX bytes:0 (0.0 b)  TX bytes:0 (0.0 b)

        veth0     Link encap:Ethernet  HWaddr 00:00:00:00:00:00  
                  BROADCAST MULTICAST  MTU:1500  Metric:1
                  RX packets:0 errors:0 dropped:0 overruns:0 frame:0
                  TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
                  collisions:0 txqueuelen:0 
                  RX bytes:0 (0.0 b)  TX bytes:0 (0.0 b)

        vif0.0    Link encap:Ethernet  HWaddr FE:FF:FF:FF:FF:FF  
                  BROADCAST MULTICAST  MTU:1500  Metric:1
                  RX packets:0 errors:0 dropped:0 overruns:0 frame:0
                  TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
                  collisions:0 txqueuelen:0 
                  RX bytes:0 (0.0 b)  TX bytes:0 (0.0 b)
        ======================================================
    
Thanks,

AKio

_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users