WARNING - OLD ARCHIVES

This is an archived copy of the Xen.org mailing list, which we have preserved to ensure that existing links to archives are not broken. The live archive, which contains the latest emails, can be found at http://lists.xen.org/
   
 
 
Xen 
 
Home Products Support Community News
 
   
 

xen-users

Re: [Xen-users] Accessing /dev/ttyI0 in guest domain not possible?

Hi,

Ok, tried another day swapping the cards to get this working, but no luck :-(

To answer your questions:

Output of "xm dmesg" (last few lines)

(XEN) Scrubbing DOM0 RAM: .done.
(XEN) Hiding PCI device 01:08.0 from DOM0
(XEN) Scrubbing Free RAM: ...done.
(XEN) *** Serial input -> DOM0 (type 'CTRL-a' three times to switch input
to Xen).

So Dom0 is hiding my ISDN card (note that the ISDN card is now in another
PCI slot)

I am not sure how to dial out as I am using Asterisk normally. Let me see
if I can get this working. Also, I will try to install the ISDN card in
another PC installing xen to see if this makes a difference. I will give
some feedback when this all has been completed.

Rene




>> Making some progress now. However, I still have some problems although
>> it
>> looks I can access the ISDN card so now and then.
>>
>> This is what I have done:
>>
>> title Xen 2.0 / XenLinux 2.6.11 rks
>>    kernel /boot/xen.gz dom0_mem=64000 console=vga
>> physdev_dom0_hide=(01:0d.0) module /boot/vmlinuz-2.6.11-rks-xen0
>> root=/dev/hda3 ro console=tty0
>
> Looks good.  Do you see the appropriate message from Xen at boot time,
> confirming that the card really is hidden?
>
>> And in my guest OS I put the line: pci = ['01,0e,0'] so I will have
>> access
>> to my ISDN PCI card. Asterisk is not complaining anymore, but no calls
>> are
>>  ISDN calls are "seen" by my gues OS.
>>
>> Using lspvc -v I found out that the ISDN card did not got an IRQ, so I
>> inserted the card in another PCI-slot and rebooted the system. Now I get
>> the message that shows me an IRQ has been found:
>
> This is strange, it should just work.  I guess your machine is probably
> sharing IRQs but that should work with Xen too.
>> The only thing that worries me is the line "HiSax: Total 0 card
>> defined".
>>
>> lspci -v looks ok now:
>> 0000:01:0d.0 Network controller: AVM Audiovisuelles MKTG & Computer
>> System
>> GmbH A1 ISDN [Fritz] (rev 02)
>>         Subsystem: AVM Audiovisuelles MKTG & Computer System GmbH
>> FRITZ!Card ISDN Controller
>>         Flags: medium devsel, IRQ 21
>>         Memory at febfff60 (32-bit, non-prefetchable) [size=32]
>>         I/O ports at 7860 [size=32]
>
> Looks sane.  Can you confirm that the card doesn't appear in dom0?  Try
> lspci
> (and inspect the boot output).  We don't want the domains to fight.
>
>> But again, no calls are recognized.
>
> Can you try doing an outgoing call (e.g. fax someone) and see if that
> works?
>
>> I have the feeling that this is an IRQ problem. I restarted the system
>> several times and I got it working once....
>>
>> Does xen do anything special with interrupts I should be aware of?
>
> I guess it could be an IRQ problem.  We've not seen this behaviour before
> (that I know of) but I guess it could have been tickled by some quirk of
> your
> machine setup.
>
> Cheers,
> Mark
>
>>
>> Thanks,
>> Rene
>>
>> >> Now I started up my xenU domain which does not show anything about
>> found
>> >> ISDN cards, but I am not worried as I don't see any message about
>> >> network
>> >> cards either which work perfectly.
>> >
>> > The default configuration uses a virtual network card - network
>> traffic
>> > gets
>> > sent via dom0, which owns the *real* network card.
>> >
>> >> But when starting my Asterisk server in the xenU domain I get some
>> >> errors:
>> >> Jul  3 18:10:36 ERROR[865]: Unable to register channel '/dev/ttyI0'
>> >> Jul  3 18:10:36 WARNING[865]: chan_modem.so: load_module failed,
>> >> returning
>> >> -1 Jul  3 18:10:36 WARNING[865]: Loading module chan_modem.so failed!
>> >>
>> >> So it looks that an unpriviliged domain cannot access my ISDN card?
>> >
>> > The XenU kernel won't support any real hardware devices, only Xen's
>> > virtual
>> > devices.
>> >
>> >> Digging further, I decided to boot a xen0 domain as guest instead of
>> >> xenU.
>> >> Now my ISDN card is recognized although not installed(?)
>> >>
>> >> HiSax: AVM PCI driver Rev. 1.29.2.4
>> >> FritzPCI: No PCI card found
>> >> HiSax: Card AVM Fritz PnP/PCI not installed !
>> >>
>> >> Asterisk doesn't complain anymore although I am not sure if it
>> works...
>> >>
>> >> Does anyone know why xenU is not allowed to access my ISDN
>> /dev/ttyI0?
>> >
>> > You need to give the domain direct access to the ISDN card.  This is
>> > important
>> > because only one domain can own a PCI card at once.  Multiple drivers
>> > fighting over a PCI card will end in tears...
>> >
>> > You need to hide the PCI device from dom0 so that it doesn't try to
>> drive
>> > it:
>> > add "physdev_dom0_hide=(xx.yy.z)" to Xen's commandline, substituting
>> the
>> > config address of your card (you can find this in the output of
>> "lspci").
>> >
>> > When you boot, check "xm dmesg" for an explicit line from Xen saying
>> that
>> > it's
>> > hiding the PCI device.  If there isn't one then something's wrong -
>> > you'll have to debug this first.
>> >
>> > Once hiding the device works, you need to give the domain access to
>> it.
>> > You
>> > need to add this to the config file - the syntax for this is (I think)
>> > described in the user manual.
>> >
>> > Once you've done those things, boot the xen0 kernel in the domain and
>> it
>> > should work.  Let us know if you get stuck.
>> >
>> > Cheers,
>> > Mark
>> >
>> > _______________________________________________
>> > Xen-users mailing list
>> > Xen-users@xxxxxxxxxxxxxxxxxxx
>> > http://lists.xensource.com/xen-users
>
> _______________________________________________
> Xen-users mailing list
> Xen-users@xxxxxxxxxxxxxxxxxxx
> http://lists.xensource.com/xen-users
>
>


_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users