On 5/21/05, Kip Macy <kip.macy@xxxxxxxxx> wrote:
> I fail to understand your attitude - I apologized 2 minutes after your
> initial response. Why are you dragging this out?
>
> -Kip
>
> On 5/20/05, andrew mathes <amathes@xxxxxxxxxxxx> wrote:
> > i just wanted to verify ... is this REALLY your kernel boot line, and do
> > you have more than 8 loopback devices running?
> >
> > because it only worked for me having max_loop on the 2nd line, otherwise
> > it wouldn't let me do it.
> >
> > and if you don't have more than 8 loopback devices running, the snootiness
> > isn't appreciated, especially if you're not 100% sure that you're right.
> >
> > so my fault if yours is actually working in the configuration you have
> > there, but the attitude is still unnecessary.
> >
> > so for anyone else ... try it on the vmlinuz line as well
> >
> > have a nice day
> >
> > On Wed, 11 May 2005, Kip Macy wrote:
> >
> > > In the future check the FAQ first, here is my grub line:
> > > kernel /xen-3.0-debug-untested.gz dom0_mem=524288 max_loop=255
> > > com1=9600,8n1 cdb=com1 console=com1 hz=1000
> > >
> > > On 5/11/05, andrew mathes <amathes@xxxxxxxxxxxx> wrote:
> > >> I can't seem to increase the # beyond 8 ...
> > >>
> > >> i'm just using stock xen0 and xenU, here is my grub line:
> > >>
> > >> title Xen 2.0 / XenLinux 2.6.10
> > >> kernel /xen.gz dom0_mem=256000
> > >> module /vmlinuz-2.6.10-xen0 root=/dev/md1 max_loop=32 console=tty0 ro
> > >>
> > >> from all i can figure this should make it 32 ... anyone point me in the
> > >> right direction?
> > >>
> > >> thanks again!
> > >>
> > >> _______________________________________________
> > >> Xen-users mailing list
> > >> Xen-users@xxxxxxxxxxxxxxxxxxx
> > >> http://lists.xensource.com/xen-users
> > >>
> > >
> > > _______________________________________________
> > > Xen-users mailing list
> > > Xen-users@xxxxxxxxxxxxxxxxxxx
> > > http://lists.xensource.com/xen-users
> > >
> >
>
> _______________________________________________
> Xen-users mailing list
> Xen-users@xxxxxxxxxxxxxxxxxxx
> http://lists.xensource.com/xen-users
>
Kip,
That is not for you. I did not do it because of you, but
because, if the FAQ is wrong (and that should not be
considered a very weak possibility cause the software
is going a lot of changes, and may be you remember
a problem with the a feature of 3.0 that is in the
documentation for 2.0), the FAQ should be corrected.
The phrase used in the FAQ is NOT clear to me. "The
domain 0 kernel command line in Grub" is not clear
to me. And that is why I suggested an example, in
order to clarify the matters. May other people just
misunderstand that line, and I would not like that
happening.
If I was rude to you, I apologize, that was not and is
not what I mean. And will never be.
--
Bye,
Fernando Maior
LPIC/1 31908
_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users
|
Home