Update all block tests to use the Xen Virtual Block Device (xvd) rather than
IDE or SCSI.
This patch also modifies
09_block_attach_and_dettach_device_check_data_pos.py to force / to be
read-write otherwise the mkdir fails.
Also Whistspace cleanups.
Signed-off-by: Tony Breeds <tony@xxxxxxxxxxxxxxxxxx>
---
tools/xm-test/tests/block-create/01_block_attach_device_pos.py
| 10 +-
tools/xm-test/tests/block-create/02_block_attach_file_device_pos.py
| 8 -
tools/xm-test/tests/block-create/04_block_attach_device_repeatedly_pos.py
| 16 +--
tools/xm-test/tests/block-create/05_block_attach_and_dettach_device_repeatedly_pos.py
| 18 ++--
tools/xm-test/tests/block-create/06_block_attach_baddomain_neg.py
| 8 -
tools/xm-test/tests/block-create/07_block_attach_baddevice_neg.py
| 14 +--
tools/xm-test/tests/block-create/08_block_attach_bad_filedevice_neg.py
| 16 +--
tools/xm-test/tests/block-create/09_block_attach_and_dettach_device_check_data_pos.py
| 44 +++++-----
tools/xm-test/tests/block-create/10_block_attach_dettach_multiple_devices.py
| 30 +++---
tools/xm-test/tests/block-create/11_block_attach_shared_dom0.py
| 2
tools/xm-test/tests/block-create/12_block_attach_shared_domU.py
| 2
tools/xm-test/tests/block-destroy/01_block-destroy_btblock_pos.py
| 8 -
tools/xm-test/tests/block-destroy/02_block-destroy_rtblock_pos.py
| 8 -
tools/xm-test/tests/block-destroy/04_block-destroy_nonattached_neg.py
| 2
tools/xm-test/tests/block-destroy/05_block-destroy_byname_pos.py
| 8 -
tools/xm-test/tests/block-destroy/06_block-destroy_check_list_pos.py
| 10 +-
tools/xm-test/tests/block-integrity/01_block_device_read_verify.py
| 4
tools/xm-test/tests/block-integrity/02_block_device_write_verify.py
| 4
tools/xm-test/tests/block-list/01_block-list_pos.py
| 6 -
tools/xm-test/tests/block-list/02_block-list_attachbd_pos.py
| 6 -
tools/xm-test/tests/block-list/03_block-list_anotherbd_pos.py
| 10 +-
tools/xm-test/tests/block-list/06_block-list_checkremove_pos.py
| 24 ++---
22 files changed, 128 insertions(+), 130 deletions(-)
--- a/tools/xm-test/tests/block-create/01_block_attach_device_pos.py Thu Oct
26 18:56:14 2006 +1000
+++ b/tools/xm-test/tests/block-create/01_block_attach_device_pos.py Thu Oct
26 18:57:46 2006 +1000
@@ -32,12 +32,12 @@ except ConsoleError, e:
FAIL(str(e))
-block_attach(domain, "phy:ram1", "sdb1")
+block_attach(domain, "phy:ram1", "xvda1")
-try:
- run = console.runCmd("cat /proc/partitions")
+try:
+ run = console.runCmd("cat /proc/partitions")
except ConsoleError, e:
- FAIL(str(e))
+ FAIL(str(e))
# Close the console
domain.closeConsole()
@@ -45,5 +45,5 @@ domain.closeConsole()
# Stop the domain (nice shutdown)
domain.stop()
-if not re.search("sdb1",run["output"]):
+if not re.search("xvda1",run["output"]):
FAIL("Device is not actually connected to the domU")
diff -r 6186ec41fc18 -r 4b13f1fdba2d
tools/xm-test/tests/block-create/02_block_attach_file_device_pos.py
--- a/tools/xm-test/tests/block-create/02_block_attach_file_device_pos.py
Thu Oct 26 18:56:14 2006 +1000
+++ b/tools/xm-test/tests/block-create/02_block_attach_file_device_pos.py
Thu Oct 26 18:57:46 2006 +1000
@@ -32,10 +32,10 @@ except ConsoleError, e:
FAIL(str(e))
-block_attach(domain, "file:/dev/ram1", "sdb2")
+block_attach(domain, "file:/dev/ram1", "xvda1")
try:
- run = console.runCmd("cat /proc/partitions")
+ run = console.runCmd("cat /proc/partitions")
except ConsoleError, e:
FAIL(str(e))
@@ -45,5 +45,5 @@ domain.closeConsole()
# Stop the domain (nice shutdown)
domain.stop()
-if not re.search("sdb2",run["output"]):
- FAIL("Device is not actually connected to the domU")
+if not re.search("xvda1",run["output"]):
+ FAIL("Device is not actually connected to the domU")
diff -r 6186ec41fc18 -r 4b13f1fdba2d
tools/xm-test/tests/block-create/04_block_attach_device_repeatedly_pos.py
--- a/tools/xm-test/tests/block-create/04_block_attach_device_repeatedly_pos.py
Thu Oct 26 18:56:14 2006 +1000
+++ b/tools/xm-test/tests/block-create/04_block_attach_device_repeatedly_pos.py
Thu Oct 26 18:57:46 2006 +1000
@@ -30,14 +30,14 @@ except ConsoleError, e:
FAIL(str(e))
for i in range(10):
- status, output = traceCommand("xm block-attach %s phy:ram1 sdb1 w" %
domain.getName())
- if i == 0 and status != 0:
- FAIL("xm block attach returned invalid %i != 0" % status)
- if i > 0 and status == 0:
- FAIL("xm block-attach (repeat) returned invalid %i > 0" % status)
- run = console.runCmd("cat /proc/partitions")
- if not re.search("sdb1", run['output']):
- FAIL("Device is not actually attached to domU")
+ status, output = traceCommand("xm block-attach %s phy:ram1 xvda1 w" %
domain.getName())
+ if i == 0 and status != 0:
+ FAIL("xm block attach returned invalid %i != 0" % status)
+ if i > 0 and status == 0:
+ FAIL("xm block-attach (repeat) returned invalid %i > 0" % status)
+ run = console.runCmd("cat /proc/partitions")
+ if not re.search("xvda1", run['output']):
+ FAIL("Device is not actually attached to domU")
# Close the console
domain.closeConsole()
diff -r 6186ec41fc18 -r 4b13f1fdba2d
tools/xm-test/tests/block-create/05_block_attach_and_dettach_device_repeatedly_pos.py
---
a/tools/xm-test/tests/block-create/05_block_attach_and_dettach_device_repeatedly_pos.py
Thu Oct 26 18:56:14 2006 +1000
+++
b/tools/xm-test/tests/block-create/05_block_attach_and_dettach_device_repeatedly_pos.py
Thu Oct 26 18:57:46 2006 +1000
@@ -32,15 +32,15 @@ except ConsoleError, e:
for i in range(10):
- block_attach(domain, "phy:ram1", "sdb1")
- run = console.runCmd("cat /proc/partitions")
- if not re.search("sdb1", run["output"]):
- FAIL("Failed to attach block device: /proc/partitions does not
show that!")
-
- block_detach(domain, "sdb1")
- run = console.runCmd("cat /proc/partitions")
- if re.search("sdb1", run["output"]):
- FAIL("Failed to dettach block device: /proc/partitions still
showing that!")
+ block_attach(domain, "phy:ram1", "xvda1")
+ run = console.runCmd("cat /proc/partitions")
+ if not re.search("xvda1", run["output"]):
+ FAIL("Failed to attach block device: /proc/partitions does not show
that!")
+
+ block_detach(domain, "xvda1")
+ run = console.runCmd("cat /proc/partitions")
+ if re.search("xvda1", run["output"]):
+ FAIL("Failed to dettach block device: /proc/partitions still showing
that!")
# Close the console
domain.closeConsole()
diff -r 6186ec41fc18 -r 4b13f1fdba2d
tools/xm-test/tests/block-create/06_block_attach_baddomain_neg.py
--- a/tools/xm-test/tests/block-create/06_block_attach_baddomain_neg.py Thu Oct
26 18:56:14 2006 +1000
+++ b/tools/xm-test/tests/block-create/06_block_attach_baddomain_neg.py Thu Oct
26 18:57:46 2006 +1000
@@ -8,13 +8,11 @@ if ENABLE_HVM_SUPPORT:
if ENABLE_HVM_SUPPORT:
SKIP("Block-attach not supported for HVM domains")
-status, output = traceCommand("xm block-attach NOT-EXIST phy:ram1 sdb1 w")
+status, output = traceCommand("xm block-attach NOT-EXIST phy:ram1 xvda1 w")
eyecatcher = "Error"
where = output.find(eyecatcher)
if status == 0:
- FAIL("xm block-attach returned bad status, expected non 0, status is:
%i" % status )
+ FAIL("xm block-attach returned bad status, expected non 0, status is: %i"
% status )
elif where == -1:
- FAIL("xm block-attach returned bad output, expected Error, output is:
%s" % output )
-
-
+ FAIL("xm block-attach returned bad output, expected Error, output is: %s"
% output )
diff -r 6186ec41fc18 -r 4b13f1fdba2d
tools/xm-test/tests/block-create/07_block_attach_baddevice_neg.py
--- a/tools/xm-test/tests/block-create/07_block_attach_baddevice_neg.py Thu Oct
26 18:56:14 2006 +1000
+++ b/tools/xm-test/tests/block-create/07_block_attach_baddevice_neg.py Thu Oct
26 18:57:46 2006 +1000
@@ -30,18 +30,18 @@ except ConsoleError, e:
FAIL(str(e))
-status, output = traceCommand("xm block-attach %s phy:NOT-EXIST sdb1 w" %
domain.getName())
+status, output = traceCommand("xm block-attach %s phy:NOT-EXIST xvda1 w" %
domain.getName())
eyecatcher = "Error"
where = output.find(eyecatcher)
if status == 0:
- FAIL("xm block-attach returned bad status, expected non 0, status is:
%i" % status )
+ FAIL("xm block-attach returned bad status, expected non 0, status is: %i"
% status )
elif where == -1:
- FAIL("xm block-attach returned bad output, expected Error, output is:
%s" % output )
+ FAIL("xm block-attach returned bad output, expected Error, output is: %s"
% output )
try:
- run = console.runCmd("cat /proc/partitions")
+ run = console.runCmd("cat /proc/partitions")
except ConsoleError, e:
- FAIL(str(e))
+ FAIL(str(e))
# Close the console
domain.closeConsole()
@@ -49,5 +49,5 @@ domain.closeConsole()
# Stop the domain (nice shutdown)
domain.stop()
-if re.search("sdb1",run["output"]):
- FAIL("Non existent Device was connected to the domU")
+if re.search("xvda1",run["output"]):
+ FAIL("Non existent Device was connected to the domU")
diff -r 6186ec41fc18 -r 4b13f1fdba2d
tools/xm-test/tests/block-create/08_block_attach_bad_filedevice_neg.py
--- a/tools/xm-test/tests/block-create/08_block_attach_bad_filedevice_neg.py
Thu Oct 26 18:56:14 2006 +1000
+++ b/tools/xm-test/tests/block-create/08_block_attach_bad_filedevice_neg.py
Thu Oct 26 18:57:46 2006 +1000
@@ -29,18 +29,18 @@ except ConsoleError, e:
saveLog(console.getHistory())
FAIL(str(e))
-status, output = traceCommand("xm block-attach %s file:/dev/NOT-EXIST sdb1 w"
% domain.getName())
+status, output = traceCommand("xm block-attach %s file:/dev/NOT-EXIST xvda1 w"
% domain.getName())
eyecatcher = "Error"
where = output.find(eyecatcher)
if status == 0:
- FAIL("xm block-attach returned bad status, expected non 0, status is:
%i" % status )
+ FAIL("xm block-attach returned bad status, expected non 0, status is: %i"
% status )
elif where == -1:
- FAIL("xm block-attach returned bad output, expected Error, output is:
%s" % output )
-
+ FAIL("xm block-attach returned bad output, expected Error, output is: %s"
% output )
+
try:
- run = console.runCmd("cat /proc/partitions")
+ run = console.runCmd("cat /proc/partitions")
except ConsoleError, e:
- FAIL(str(e))
+ FAIL(str(e))
# Close the console
domain.closeConsole()
@@ -48,5 +48,5 @@ domain.closeConsole()
# Stop the domain (nice shutdown)
domain.stop()
-if re.search("sdb1",run["output"]):
- FAIL("Non existent Device was connected to the domU")
+if re.search("xvda1",run["output"]):
+ FAIL("Non existent Device was connected to the domU")
diff -r 6186ec41fc18 -r 4b13f1fdba2d
tools/xm-test/tests/block-create/09_block_attach_and_dettach_device_check_data_pos.py
---
a/tools/xm-test/tests/block-create/09_block_attach_and_dettach_device_check_data_pos.py
Thu Oct 26 18:56:14 2006 +1000
+++
b/tools/xm-test/tests/block-create/09_block_attach_and_dettach_device_check_data_pos.py
Thu Oct 26 18:57:46 2006 +1000
@@ -12,7 +12,7 @@ if ENABLE_HVM_SUPPORT:
SKIP("Block-attach not supported for HVM domains")
# Create a domain (default XmTestDomain, with our ramdisk)
-domain = XmTestDomain()
+domain = XmTestDomain(extraConfig={"extra":"rw"})
try:
console = domain.start()
@@ -35,27 +35,27 @@ if s != 0:
FAIL("mke2fs returned %i != 0" % s)
for i in range(10):
- block_attach(domain, "phy:ram1", "hda1")
- run = console.runCmd("cat /proc/partitions")
- if not re.search("hda1", run["output"]):
- FAIL("Failed to attach block device: /proc/partitions does not
show that!")
-
- console.runCmd("mkdir -p /mnt/hda1; mount /dev/hda1 /mnt/hda1")
-
- if i:
- run = console.runCmd("cat /mnt/hda1/myfile | grep %s" % (i-1))
- if run['return']:
- FAIL("File created was lost or not updated!")
-
- console.runCmd("echo \"%s\" > /mnt/hda1/myfile" % i)
- run = console.runCmd("cat /mnt/hda1/myfile")
- print run['output']
- console.runCmd("umount /mnt/hda1")
-
- block_detach(domain, "hda1")
- run = console.runCmd("cat /proc/partitions")
- if re.search("hda1", run["output"]):
- FAIL("Failed to dettach block device: /proc/partitions still
showing that!")
+ block_attach(domain, "phy:ram1", "xvda1")
+ run = console.runCmd("cat /proc/partitions")
+ if not re.search("xvda1", run["output"]):
+ FAIL("Failed to attach block device: /proc/partitions does not show
that!")
+
+ console.runCmd("mkdir -p /mnt/xvda1; mount /dev/xvda1 /mnt/xvda1")
+
+ if i:
+ run = console.runCmd("cat /mnt/xvda1/myfile | grep %s" % (i-1))
+ if run['return']:
+ FAIL("File created was lost or not updated!")
+
+ console.runCmd("echo \"%s\" > /mnt/xvda1/myfile" % i)
+ run = console.runCmd("cat /mnt/xvda1/myfile")
+ print run['output']
+ console.runCmd("umount /mnt/xvda1")
+
+ block_detach(domain, "xvda1")
+ run = console.runCmd("cat /proc/partitions")
+ if re.search("xvda1", run["output"]):
+ FAIL("Failed to dettach block device: /proc/partitions still showing
that!")
# Close the console
domain.closeConsole()
diff -r 6186ec41fc18 -r 4b13f1fdba2d
tools/xm-test/tests/block-create/10_block_attach_dettach_multiple_devices.py
---
a/tools/xm-test/tests/block-create/10_block_attach_dettach_multiple_devices.py
Thu Oct 26 18:56:14 2006 +1000
+++
b/tools/xm-test/tests/block-create/10_block_attach_dettach_multiple_devices.py
Thu Oct 26 18:57:46 2006 +1000
@@ -15,7 +15,7 @@ def availableRamdisks():
def availableRamdisks():
i = 0
while os.access("/dev/ram%d" % i, os.F_OK ):
- i += 1
+ i += 1
return i
@@ -36,7 +36,7 @@ def detach(devname):
return -2, "Failed to detach block device: /proc/partitions still
showing that!"
return 0, None
-
+
if ENABLE_HVM_SUPPORT:
SKIP("Block-attach not supported for HVM domains")
@@ -69,22 +69,22 @@ while i < ramdisks or devices:
op = random.randint(0,1) # 1 = attach, 0 = detach
if (not devices or op) and i < ramdisks:
i += 1
- devname = "/dev/hda%d" % i
- phy = "/dev/ram%d" % i
- print "Attaching %s to %s" % (devname, phy)
- status, msg = attach( phy, devname )
- if status:
- FAIL(msg)
- else:
- devices.append(devname)
+ devname = "/dev/xvda%d" % i
+ phy = "/dev/ram%d" % i
+ print "Attaching %s to %s" % (devname, phy)
+ status, msg = attach( phy, devname )
+ if status:
+ FAIL(msg)
+ else:
+ devices.append(devname)
elif devices:
devname = random.choice(devices)
- devices.remove(devname)
- print "Detaching %s" % devname
- status, msg = detach(devname)
- if status:
- FAIL(msg)
+ devices.remove(devname)
+ print "Detaching %s" % devname
+ status, msg = detach(devname)
+ if status:
+ FAIL(msg)
# Close the console
domain.closeConsole()
diff -r 6186ec41fc18 -r 4b13f1fdba2d
tools/xm-test/tests/block-create/11_block_attach_shared_dom0.py
--- a/tools/xm-test/tests/block-create/11_block_attach_shared_dom0.py Thu Oct
26 18:56:14 2006 +1000
+++ b/tools/xm-test/tests/block-create/11_block_attach_shared_dom0.py Thu Oct
26 18:57:46 2006 +1000
@@ -24,7 +24,7 @@ if s != 0:
# Now try to start a DomU with write access to /dev/ram0
-config = {"disk":"phy:/dev/ram0,hda1,w"}
+config = {"disk":"phy:/dev/ram0,xvda1,w"}
domain = XmTestDomain(extraConfig=config);
diff -r 6186ec41fc18 -r 4b13f1fdba2d
tools/xm-test/tests/block-create/12_block_attach_shared_domU.py
--- a/tools/xm-test/tests/block-create/12_block_attach_shared_domU.py Thu Oct
26 18:56:14 2006 +1000
+++ b/tools/xm-test/tests/block-create/12_block_attach_shared_domU.py Thu Oct
26 18:57:46 2006 +1000
@@ -8,7 +8,7 @@ if ENABLE_HVM_SUPPORT:
if ENABLE_HVM_SUPPORT:
SKIP("Block-attach not supported for HVM domains")
-config = {"disk":"phy:/dev/ram0,hda1,w"}
+config = {"disk":"phy:/dev/ram0,xvda1,w"}
dom1 = XmTestDomain(extraConfig=config)
dom2 = XmTestDomain(dom1.getName() + "-2",
diff -r 6186ec41fc18 -r 4b13f1fdba2d
tools/xm-test/tests/block-destroy/01_block-destroy_btblock_pos.py
--- a/tools/xm-test/tests/block-destroy/01_block-destroy_btblock_pos.py Thu Oct
26 18:56:14 2006 +1000
+++ b/tools/xm-test/tests/block-destroy/01_block-destroy_btblock_pos.py Thu Oct
26 18:57:46 2006 +1000
@@ -9,7 +9,7 @@ if ENABLE_HVM_SUPPORT:
if ENABLE_HVM_SUPPORT:
SKIP("Block-detach not supported for HVM domains")
-config = {"disk":"phy:/dev/ram0,hda1,w"}
+config = {"disk":"phy:/dev/ram0,xvda1,w"}
domain = XmTestDomain(extraConfig=config)
try:
@@ -21,7 +21,7 @@ except DomainError, e:
try:
console.setHistorySaveCmds(value=True)
- run = console.runCmd("cat /proc/partitions | grep hda1")
+ run = console.runCmd("cat /proc/partitions | grep xvda1")
run2 = console.runCmd("cat /proc/partitions")
except ConsoleError, e:
FAIL(str(e))
@@ -29,10 +29,10 @@ if run["return"] != 0:
if run["return"] != 0:
FAIL("block device isn't attached; can't detach!")
-block_detach(domain, "hda1")
+block_detach(domain, "xvda1")
try:
- run = console.runCmd("cat /proc/partitions | grep hda1")
+ run = console.runCmd("cat /proc/partitions | grep xvda1")
except ConsoleError, e:
saveLog(console.getHistory())
FAIL(str(e))
diff -r 6186ec41fc18 -r 4b13f1fdba2d
tools/xm-test/tests/block-destroy/02_block-destroy_rtblock_pos.py
--- a/tools/xm-test/tests/block-destroy/02_block-destroy_rtblock_pos.py Thu Oct
26 18:56:14 2006 +1000
+++ b/tools/xm-test/tests/block-destroy/02_block-destroy_rtblock_pos.py Thu Oct
26 18:57:46 2006 +1000
@@ -18,9 +18,9 @@ except DomainError, e:
print e.extra
FAIL("Unable to create domain")
-block_attach(domain, "phy:/dev/ram0", "hda1")
+block_attach(domain, "phy:/dev/ram0", "xvda1")
try:
- run = console.runCmd("cat /proc/partitions | grep hda1")
+ run = console.runCmd("cat /proc/partitions | grep xvda1")
except ConsoleError, e:
saveLog(console.getHistory())
FAIL(str(e))
@@ -28,9 +28,9 @@ if run["return"] != 0:
if run["return"] != 0:
FAIL("Failed to verify that block dev is attached")
-block_detach(domain, "hda1")
+block_detach(domain, "xvda1")
try:
- run = console.runCmd("cat /proc/partitions | grep hda1")
+ run = console.runCmd("cat /proc/partitions | grep xvda1")
except ConsoleError, e:
saveLog(console.getHistory())
FAIL(str(e))
diff -r 6186ec41fc18 -r 4b13f1fdba2d
tools/xm-test/tests/block-destroy/04_block-destroy_nonattached_neg.py
--- a/tools/xm-test/tests/block-destroy/04_block-destroy_nonattached_neg.py
Thu Oct 26 18:56:14 2006 +1000
+++ b/tools/xm-test/tests/block-destroy/04_block-destroy_nonattached_neg.py
Thu Oct 26 18:57:46 2006 +1000
@@ -19,7 +19,7 @@ except DomainError, e:
print e.extra
FAIL("Unable to create domain")
-status, output = traceCommand("xm block-detach %s sda1" % domain.getId())
+status, output = traceCommand("xm block-detach %s xvda1" % domain.getId())
eyecatcher1 = "Error:"
eyecatcher2 = "Traceback"
diff -r 6186ec41fc18 -r 4b13f1fdba2d
tools/xm-test/tests/block-destroy/05_block-destroy_byname_pos.py
--- a/tools/xm-test/tests/block-destroy/05_block-destroy_byname_pos.py Thu Oct
26 18:56:14 2006 +1000
+++ b/tools/xm-test/tests/block-destroy/05_block-destroy_byname_pos.py Thu Oct
26 18:57:46 2006 +1000
@@ -9,7 +9,7 @@ if ENABLE_HVM_SUPPORT:
if ENABLE_HVM_SUPPORT:
SKIP("Block-detach not supported for HVM domains")
-config = {"disk":"phy:/dev/ram0,hda1,w"}
+config = {"disk":"phy:/dev/ram0,xvda1,w"}
domain = XmTestDomain(extraConfig=config)
try:
@@ -20,7 +20,7 @@ except DomainError, e:
FAIL("Unable to create domain")
try:
- run = console.runCmd("cat /proc/partitions | grep hda1")
+ run = console.runCmd("cat /proc/partitions | grep xvda1")
run2 = console.runCmd("cat /proc/partitions")
except ConsoleError, e:
FAIL(str(e))
@@ -28,10 +28,10 @@ if run["return"] != 0:
if run["return"] != 0:
FAIL("block device isn't attached; can't detach!")
-block_detach(domain, "hda1")
+block_detach(domain, "xvda1")
try:
- run = console.runCmd("cat /proc/partitions | grep hda1")
+ run = console.runCmd("cat /proc/partitions | grep xvda1")
except ConsoleError, e:
saveLog(console.getHistory())
FAIL(str(e))
diff -r 6186ec41fc18 -r 4b13f1fdba2d
tools/xm-test/tests/block-destroy/06_block-destroy_check_list_pos.py
--- a/tools/xm-test/tests/block-destroy/06_block-destroy_check_list_pos.py
Thu Oct 26 18:56:14 2006 +1000
+++ b/tools/xm-test/tests/block-destroy/06_block-destroy_check_list_pos.py
Thu Oct 26 18:57:46 2006 +1000
@@ -12,7 +12,7 @@ def checkXmLongList(domain):
s, o = traceCommand("xm list --long %s" % domain.getName())
if s != 0:
FAIL("xm list --long <dom> failed")
- if re.search("hda1", o):
+ if re.search("xvda1", o):
return True
else:
return False
@@ -27,12 +27,12 @@ except DomainError,e:
except DomainError,e:
FAIL(str(e))
-block_attach(domain, "phy:/dev/ram0", "hda1")
+block_attach(domain, "phy:/dev/ram0", "xvda1")
if not checkXmLongList(domain):
- FAIL("xm long list does not show that hda1 was attached")
+ FAIL("xm long list does not show that xvda1 was attached")
-block_detach(domain, "hda1")
+block_detach(domain, "xvda1")
if checkXmLongList(domain):
- FAIL("xm long list does not show that hda1 was removed")
+ FAIL("xm long list does not show that xvda1 was removed")
diff -r 6186ec41fc18 -r 4b13f1fdba2d
tools/xm-test/tests/block-integrity/01_block_device_read_verify.py
--- a/tools/xm-test/tests/block-integrity/01_block_device_read_verify.py
Thu Oct 26 18:56:14 2006 +1000
+++ b/tools/xm-test/tests/block-integrity/01_block_device_read_verify.py
Thu Oct 26 18:57:46 2006 +1000
@@ -33,10 +33,10 @@ s, o = traceCommand("md5sum /dev/ram1")
dom0_md5sum_match = re.search(r"^[\dA-Fa-f]{32}", o, re.M)
-block_attach(domain, "phy:ram1", "hda1")
+block_attach(domain, "phy:ram1", "xvda1")
try:
- run = console.runCmd("md5sum /dev/hda1")
+ run = console.runCmd("md5sum /dev/xvda1")
except ConsoleError, e:
FAIL(str(e))
diff -r 6186ec41fc18 -r 4b13f1fdba2d
tools/xm-test/tests/block-integrity/02_block_device_write_verify.py
--- a/tools/xm-test/tests/block-integrity/02_block_device_write_verify.py
Thu Oct 26 18:56:14 2006 +1000
+++ b/tools/xm-test/tests/block-integrity/02_block_device_write_verify.py
Thu Oct 26 18:57:46 2006 +1000
@@ -28,12 +28,12 @@ except DomainError, e:
console.setHistorySaveCmds(value=True)
-block_attach(domain, "phy:ram1", "hda1")
+block_attach(domain, "phy:ram1", "xvda1")
console.setTimeout(120)
try:
- run = console.runCmd("dd if=/dev/urandom bs=512 count=`cat
/sys/block/hda1/size` | tee /dev/hda1 | md5sum")
+ run = console.runCmd("dd if=/dev/urandom bs=512 count=`cat
/sys/block/xvda1/size` | tee /dev/xvda1 | md5sum")
except ConsoleError, e:
FAIL(str(e))
diff -r 6186ec41fc18 -r 4b13f1fdba2d
tools/xm-test/tests/block-list/01_block-list_pos.py
--- a/tools/xm-test/tests/block-list/01_block-list_pos.py Thu Oct 26
18:56:14 2006 +1000
+++ b/tools/xm-test/tests/block-list/01_block-list_pos.py Thu Oct 26
18:57:46 2006 +1000
@@ -11,7 +11,7 @@ if ENABLE_HVM_SUPPORT:
if ENABLE_HVM_SUPPORT:
SKIP("Block-list not supported for HVM domains")
-config = {"disk":"phy:/dev/ram0,hda1,w"}
+config = {"disk":"phy:/dev/ram0,xvda1,w"}
domain = XmTestDomain(extraConfig=config)
try:
@@ -22,7 +22,7 @@ except DomainError, e:
FAIL("Unable to create domain")
status, output = traceCommand("xm block-list %s" % domain.getId())
-eyecatcher = "769"
+eyecatcher = "51713"
where = output.find(eyecatcher)
if status != 0:
FAIL("xm block-list returned bad status, expected 0, status is %i" %
status)
@@ -31,7 +31,7 @@ elif where < 0:
#Verify the block device on DomainU
try:
- run = console.runCmd("cat /proc/partitions | grep hda1")
+ run = console.runCmd("cat /proc/partitions | grep xvda1")
except ConsoleError, e:
saveLog(console.getHistory())
FAIL(str(e))
diff -r 6186ec41fc18 -r 4b13f1fdba2d
tools/xm-test/tests/block-list/02_block-list_attachbd_pos.py
--- a/tools/xm-test/tests/block-list/02_block-list_attachbd_pos.py Thu Oct
26 18:56:14 2006 +1000
+++ b/tools/xm-test/tests/block-list/02_block-list_attachbd_pos.py Thu Oct
26 18:57:46 2006 +1000
@@ -22,11 +22,11 @@ except DomainError, e:
FAIL("Unable to create domain")
#Attach one virtual block device to domainU
-block_attach(domain, "phy:/dev/ram0", "hda1")
+block_attach(domain, "phy:/dev/ram0", "xvda1")
#Verify block-list on Domain0
status, output = traceCommand("xm block-list %s" % domain.getId())
-eyecatcher = "769"
+eyecatcher = "51713"
where = output.find(eyecatcher)
if status != 0:
FAIL("xm block-list returned bad status, expected 0, status is %i" %
status)
@@ -35,7 +35,7 @@ elif where < 0 :
#Verify attached block device on DomainU
try:
- run = console.runCmd("cat /proc/partitions | grep hda1")
+ run = console.runCmd("cat /proc/partitions | grep xvda1")
except ConsoleError, e:
saveLog(console.getHistory())
FAIL(str(e))
diff -r 6186ec41fc18 -r 4b13f1fdba2d
tools/xm-test/tests/block-list/03_block-list_anotherbd_pos.py
--- a/tools/xm-test/tests/block-list/03_block-list_anotherbd_pos.py Thu Oct
26 18:56:14 2006 +1000
+++ b/tools/xm-test/tests/block-list/03_block-list_anotherbd_pos.py Thu Oct
26 18:57:46 2006 +1000
@@ -11,7 +11,7 @@ if ENABLE_HVM_SUPPORT:
if ENABLE_HVM_SUPPORT:
SKIP("Block-list not supported for HVM domains")
-config = {"disk":"phy:/dev/ram0,hda1,w"}
+config = {"disk":"phy:/dev/ram0,xvda1,w"}
domain = XmTestDomain(extraConfig=config)
try:
@@ -26,14 +26,14 @@ if status != 0:
FAIL("Fail to list block device")
#Add another virtual block device to the domain
-status, output = traceCommand("xm block-attach %s phy:/dev/ram1 hda2 w" %
domain.getId())
+status, output = traceCommand("xm block-attach %s phy:/dev/ram1 xvda2 w" %
domain.getId())
if status != 0:
FAIL("Fail to attach block device")
#Verify block-list on Domain0
status, output = traceCommand("xm block-list %s" % domain.getId())
-eyecatcher1 = "769"
-eyecatcher2 = "770"
+eyecatcher1 = "51713"
+eyecatcher2 = "51714"
where1 = output.find(eyecatcher1)
where2 = output.find(eyecatcher2)
if status != 0:
@@ -43,7 +43,7 @@ elif (where1 < 0) and (where2 < 0):
#Verify attached block device on DomainU
try:
- run = console.runCmd("cat /proc/partitions | grep hda1;cat
/proc/partitions | grep hda2")
+ run = console.runCmd("cat /proc/partitions | grep xvda1;cat
/proc/partitions | grep xvda2")
except ConsoleError, e:
saveLog(console.getHistory())
FAIL(str(e))
diff -r 6186ec41fc18 -r 4b13f1fdba2d
tools/xm-test/tests/block-list/06_block-list_checkremove_pos.py
--- a/tools/xm-test/tests/block-list/06_block-list_checkremove_pos.py Thu Oct
26 18:56:14 2006 +1000
+++ b/tools/xm-test/tests/block-list/06_block-list_checkremove_pos.py Thu Oct
26 18:57:46 2006 +1000
@@ -22,39 +22,39 @@ if o:
if o:
FAIL("block-list without devices reported something!")
-block_attach(domain, "phy:/dev/ram0", "hda1")
+block_attach(domain, "phy:/dev/ram0", "xvda1")
s, o = traceCommand("xm block-list %s" % domain.getName())
if s != 0:
FAIL("block-list failed")
-if o.find("769") == -1:
+if o.find("51713") == -1:
FAIL("block-list didn't show the block device I just attached!")
-block_attach(domain, "phy:/dev/ram1", "hda2")
+block_attach(domain, "phy:/dev/ram1", "xvda2")
s, o = traceCommand("xm block-list %s" % domain.getName())
if s != 0:
FAIL("block-list failed")
-if o.find("770") == -1:
+if o.find("51714") == -1:
FAIL("block-list didn't show the other block device I just attached!")
-block_detach(domain, "hda1")
+block_detach(domain, "xvda1")
s, o = traceCommand("xm block-list %s" % domain.getName())
if s != 0:
FAIL("block-list failed after detaching a device")
-if o.find("769") != -1:
- FAIL("hda1 still shown in block-list after detach!")
-if o.find("770") == -1:
- FAIL("hda2 not shown after detach of hda1!")
+if o.find("51713") != -1:
+ FAIL("xvda1 still shown in block-list after detach!")
+if o.find("51714") == -1:
+ FAIL("xvda2 not shown after detach of xvda1!")
-block_detach(domain, "hda2")
+block_detach(domain, "xvda2")
s, o = traceCommand("xm block-list %s" % domain.getName())
if s != 0:
FAIL("block-list failed after detaching another device")
-if o.find("770") != -1:
- FAIL("hda2 still shown in block-list after detach!")
+if o.find("51714") != -1:
+ FAIL("xvda2 still shown in block-list after detach!")
if o:
FAIL("block-list still shows something after all devices detached!")
_______________________________________________
Xen-ppc-devel mailing list
Xen-ppc-devel@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-ppc-devel
|
Home