Hi Yamahata-san,
On <20090427040951.GK22299%yamahata@xxxxxxxxxxxxx>,
Isaku Yamahata wrote:
>
> On Mon, Apr 27, 2009 at 09:53:55AM +0900, KUWAMURA Shin'ya wrote:
> > Hi Yamahata-san,
> >
> > On <20090424120910.GG22299%yamahata@xxxxxxxxxxxxx>,
> > Isaku Yamahata wrote:
> > >
> > > Can you please try this patch?
> >
> > NaT consumption occurred on tapdisk while PV and HVM were booting up.
> > Please see the attachment file.
>
> Thank you. I haven't reproduce it yet.
> Do you have any logs without the patch?
Dom0 has no error, but domUs output errors:
request_module: runaway loop modprobe binfmt-429d
request_module: runaway loop modprobe binfmt-429d
request_module: runaway loop modprobe binfmt-429d
request_module: runaway loop modprobe binfmt-429d
request_module: runaway loop modprobe binfmt-429d
# hung up
I attach messages of both PV and HVM domain.
Best regards,
--
KUWAMURA Shin'ya
Linux version 2.6.18.8-xen (kuwa@xxxxxxxxxxxxxxxxxxxxxxxxxx) (gcc version 3.4.4
20050721 (Red Hat 3.4.4-2)) #1 SMP Thu Apr 23 09:10:17 JST 2009
EFI v1.00 by Xen/ia64: SALsystab=0x2178 ACPI 2.0=0x1000
booting generic kernel on platform xen
ACPI: RSDP (v002 XEN ) @ 0x0000000000001000
ACPI: XSDT (v001 XEN Xen/ia64 0x00000000 XEN 0x00030004) @ 0x0000000000001024
ACPI: FADT (v003 XEN Xen/ia64 0x00000000 XEN 0x00030004) @ 0x0000000000001058
ACPI: MADT (v002 XEN Xen/ia64 0x00000000 XEN 0x00030004) @ 0x0000000000001478
ACPI: DSDT (v001 XEN Xen/ia64 0x00000000 XEN 0x00030004) @ 0x0000000000000000
SAL 0.1: Xen/ia64 Xen/ia64 version 0.0
SAL: AP wakeup using external interrupt vector 0xf3
No logical to physical processor mapping available
ACPI: Local APIC address c0000000fee00000
ACPI: Error parsing MADT - no IOSAPIC entries
2 CPUs available, 2 CPUs total
Running on Xen! start_info_pfn=0xfffd nr_pages=65536 flags=0x0
Virtual mem_map starts at 0xa0007fffffc80000
On node 0 totalpages: 64264
DMA zone: 64264 pages, LIFO batch:7
SMP: Allowing 2 CPUs, 0 hotplug CPUs
Built 1 zonelists. Total pages: 64264
Kernel command line: root=/dev/hda1 ro console=tty console=xvc0
PID hash table entries: 4096 (order: 12, 32768 bytes)
CPU 0: base freq=199.459MHz, ITC ratio=8/4, ITC freq=398.919MHz
Console: colour dummy device 80x25
Memory: 1022256k/1028224k available (10879k code, 26240k reserved, 5054k data, 6
88k init)
McKinley Errata 9 workaround not needed; disabling it
Calibrating delay loop... 3185.04 BogoMIPS (lpj=15925248)
Dentry cache hash table entries: 131072 (order: 6, 1048576 bytes)
Inode-cache hash table entries: 65536 (order: 5, 524288 bytes)
Mount-cache hash table entries: 1024
ACPI: Core revision 20060707
Boot processor id 0x0/0x0
Fixed BSP b0 value from CPU 1
CPU 1: synchronized ITC with CPU 0 (last diff 8 cycles, maxerr 160 cycles)
CPU 1: base freq=199.459MHz, ITC ratio=8/4, ITC freq=398.919MHz
Calibrating delay loop... 3165.38 BogoMIPS (lpj=15826944)
Brought up 2 CPUs
Total of 2 processors activated (6350.43 BogoMIPS).
migration_cost=12234
DMI not present or invalid.
NET: Registered protocol family 16
ACPI: bus type pci registered
Brought up 2 CPUs
ACPI: SCI (ACPI GSI 0) not registered
ACPI: Interpreter enabled
ACPI: Using IOSAPIC for interrupt routing
suspend: event channel 9
xen_mem: Initialising balloon driver.
SCSI subsystem initialized
usbcore: registered new driver usbfs
usbcore: registered new driver hub
NET: Registered protocol family 2
IP route cache hash table entries: 8192 (order: 2, 65536 bytes)
TCP established hash table entries: 32768 (order: 5, 524288 bytes)
TCP bind hash table entries: 16384 (order: 4, 262144 bytes)
TCP: Hash tables configured (established 32768 bind 16384)
TCP reno registered
perfmon: version 2.0 IRQ 238
perfmon: Montecito PMU detected, 27 PMCs, 35 PMDs, 12 counters (47 bits)
PAL Information Facility v0.5
perfmon: added sampling format default_format
perfmon_default_smpl: default_format v2.0 registered
Installing knfsd (copyright (C) 1996 okir@xxxxxxxxxxxx).
SGI XFS with large block/inode numbers, no debug enabled
Initializing Cryptographic API
io scheduler noop registered
io scheduler anticipatory registered (default)
io scheduler deadline registered
io scheduler cfq registered
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
ACPI: Power Button (FF) [PWRF]
ACPI: Sleep Button (FF) [SLPF]
ACPI Exception (acpi_processor-0721): AE_NOT_FOUND, Processor Device is not pres
ent [20060707]
ACPI: Getting cpuindex for acpiid 0x2
EFI Time Services Driver v0.4
Linux agpgart interface v0.101 (c) Dave Jones
[drm] Initialized drm 1.0.1 20051102
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
loop: loaded (max 8 devices)
HP CISS Driver (v 3.6.10)
Intel(R) PRO/1000 Network Driver - version 7.1.9-k4
Copyright (c) 1999-2006 Intel Corporation.
e100: Intel(R) PRO/100 Network Driver, 3.5.10-k2-NAPI
e100: Copyright(c) 1999-2005 Intel Corporation
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky <maxk@xxxxxxxxxxxx>
arcnet loaded.
netconsole: not configured, aborting
Linux video capture interface: v2.00
Xen virtual console successfully installed as xvc0
Event-channel device installed.
netfront: Initialising virtual ethernet driver.
xen-vbd: registered block device major 3
Console: switching to colour frame buffer device 100x37
input: Xen Virtual Keyboard as /class/input/input0
input: Xen Virtual Pointer as /class/input/input1
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=xx
ide-floppy driver 0.99.newide
st: Version 20050830, fixed bufsize 32768, s/g segs 256
osst :I: Tape driver with OnStream support version 0.99.4
osst :I: $Id: osst.c,v 1.73 2005/01/01 21:13:34 wriede Exp $
Fusion MPT base driver 3.04.01
Copyright (c) 1999-2005 LSI Logic Corporation
Fusion MPT SPI Host driver 3.04.01
Fusion MPT SAS Host driver 3.04.01
usbmon: debugfs is not available
ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
USB Universal Host Controller Interface driver v3.0
Initializing USB Mass Storage driver...
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
usbcore: registered new driver hiddev
usbcore: registered new driver usbhid
/home/kuwa/proj/ia64/linux-2.6.18-xen.hg/drivers/usb/input/hid-core.c: v2.6:USB
HID core driver
i8042.c: i8042 controller self test timeout.
mice: PS/2 mouse device common for all mice
i2c /dev entries driver
device-mapper: ioctl: 4.7.0-ioctl (2006-06-24) initialised: dm-devel@xxxxxxxxxx
EFI Variables Facility v0.08 2004-May-17
efivars: get_next_variable: status=8000000000000003
Advanced Linux Sound Architecture Driver Version 1.0.12rc1 (Thu Jun 22 13:55:50
2006 UTC).
no UART detected at 0x1
specify port
snd_mpu401: probe of snd_mpu401.0 failed with error -22
ALSA device list:
#0: Dummy 1
#1: Virtual MIDI Card 1
TCP bic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
Bridge firewalling registered
xen privcmd uses pseudo physical addr range [0x40000000, 0x3ffff000000] (4193264
MB)
Xen p2m: assign p2m table of [0x0000000000000000, 0x0000000040004000)
Xen p2m: to [0x0000000040000000, 0x0000000044000000) (65536 KBytes)
XENBUS: Device with no driver: device/console/0
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Freeing unused kernel memory: 688kB freed
request_module: runaway loop modprobe binfmt-429d
request_module: runaway loop modprobe binfmt-429d
request_module: runaway loop modprobe binfmt-429d
request_module: runaway loop modprobe binfmt-429d
request_module: runaway loop modprobe binfmt-429d
Linux version 2.6.9-22.EL (bhcompile@xxxxxxxxxxxxxxxxxxxxxx) (gcc version 3.4.4
20050721 (Red Hat 3.4.4-2)) #1 SMP Mon Sep 19 17:54:55 EDT 2005
Warning: EFI system table major version mismatch: got 2.00, expected 1.00
EFI v2.00 by TianoCore.org: ACPI 2.0=0xec000 SALsystab=0x1f15aac8 SMBIOS=0x1fc01
000
booting generic kernel on platform dig
ACPI: RSDP (v002 Xen ) @ 0x00000000000ec000
ACPI: XSDT (v001 Xen HVM 0x00000000 HVML 0x00000000) @ 0x00000000000ecac
0
ACPI: FADT (v004 Xen HVM 0x00000000 HVML 0x00000000) @ 0x00000000000ec8c
0
ACPI: MADT (v002 Xen HVM 0x00000000 HVML 0x00000000) @ 0x00000000000ec9c
0
ACPI: HPET (v001 Xen HVM 0x00000000 HVML 0x00000000) @ 0x00000000000eca8
0
ACPI: DSDT (v002 Xen HVM 0x00000000 INTL 0x20061109) @ 0x000000000000000
0
Warning: acpi_table_parse(ACPI_SRAT) returned 0!
Warning: acpi_table_parse(ACPI_SLIT) returned 0!
efi.trim_top: ignoring 4KB of memory at 0x0 due to granule hole at 0x0
efi.trim_top: ignoring 636KB of memory at 0x1000 due to granule hole at 0x0
efi.trim_bottom: ignoring 48KB of memory at 0xe0000 due to granule hole at 0x0
efi.trim_bottom: ignoring 15432KB of memory at 0xee000 due to granule hole at 0x
0
efi.trim_top: ignoring 128KB of memory at 0x1ff6e000 due to granule hole at 0x20
000000
Initial ramdisk at: 0xe00000001d156000 (1601685 bytes)
SAL 3.0: Xen/ia64 Tianocore SAL Xen/ia64 SAL version 2.0
SAL: AP wakeup using external interrupt vector 0xf3
SAL Platform features: None
iosapic_system_init: Disabling PC-AT compatible 8259 interrupts
ACPI: Local APIC address c0000000fee00000
register_intr: changing vector 47 from IO-SAPIC-edge to IO-SAPIC-level
register_intr: changing vector 38 from IO-SAPIC-edge to IO-SAPIC-level
register_intr: changing vector 37 from IO-SAPIC-edge to IO-SAPIC-level
8 CPUs available, 8 CPUs total
Registering legacy COM ports for serial console
MCA related initialization done
Virtual mem_map starts at 0xa0007fffffe40000
On node 0 totalpages: 30397
DMA zone: 30397 pages, LIFO batch:4
Normal zone: 0 pages, LIFO batch:1
HighMem zone: 0 pages, LIFO batch:1
Built 1 zonelists
Kernel command line: BOOT_IMAGE=atapi0:\efi\redhat\vmlinuz-2.6.9-22.EL root=/de
v/hda2 console=tty0 console=ttyS0,9600n8r hda=noprobe hdb=noprobe ro
ide_setup: hda=noprobe
ide_setup: hdb=noprobe
PID hash table entries: 1024 (order: 10, 32768 bytes)
CPU 0: base freq=199.459MHz, ITC ratio=8/4, ITC freq=398.919MHz+/--1ppm
Console: colour VGA+ 80x25
Dentry cache hash table entries: 65536 (order: 5, 524288 bytes)
Inode-cache hash table entries: 32768 (order: 4, 262144 bytes)
Placing software IO TLB between 0x4a64000 - 0x8a64000
Memory: 413248k/486352k available (5611k code, 85024k reserved, 2260k data, 384k
init)
McKinley Errata 9 workaround not needed; disabling it
Calibrating delay loop... 3130.52 BogoMIPS (lpj=1527808)
Security Scaffold v1.0.0 initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
There is already a security framework initialized, register_security failed.
selinux_register_security: Registering secondary module capability
Capability LSM initialized as secondary
Mount-cache hash table entries: 1024 (order: 0, 16384 bytes)
Boot processor id 0x0/0x0
task migration cache decay timeout: 10 msecs.
CPU 1: synchronized ITC with CPU 0 (last diff 2 cycles, maxerr 307 cycles)
CPU 1: base freq=199.459MHz, ITC ratio=8/4, ITC freq=398.919MHz+/--1ppm
Calibrating delay loop... 3139.76 BogoMIPS (lpj=1531904)
CPU 2: synchronized ITC with CPU 0 (last diff -2 cycles, maxerr 307 cycles)
CPU 2: base freq=199.459MHz, ITC ratio=8/4, ITC freq=398.919MHz+/--1ppm
Calibrating delay loop... 3139.76 BogoMIPS (lpj=1531904)
CPU 3: synchronized ITC with CPU 0 (last diff -2 cycles, maxerr 307 cycles)
CPU 3: base freq=199.459MHz, ITC ratio=8/4, ITC freq=398.919MHz+/--1ppm
Calibrating delay loop... 3113.04 BogoMIPS (lpj=1519616)
CPU 4: synchronized ITC with CPU 0 (last diff -6 cycles, maxerr 307 cycles)
CPU 4: base freq=199.459MHz, ITC ratio=8/4, ITC freq=398.919MHz+/--1ppm
Calibrating delay loop... 3139.76 BogoMIPS (lpj=1531904)
CPU 5: synchronized ITC with CPU 0 (last diff -2 cycles, maxerr 307 cycles)
CPU 5: base freq=199.459MHz, ITC ratio=8/4, ITC freq=398.919MHz+/--1ppm
Calibrating delay loop... 3130.52 BogoMIPS (lpj=1527808)
CPU 6: synchronized ITC with CPU 0 (last diff 2 cycles, maxerr 307 cycles)
CPU 6: base freq=199.459MHz, ITC ratio=8/4, ITC freq=398.919MHz+/--1ppm
Calibrating delay loop... 3122.28 BogoMIPS (lpj=1523712)
CPU 7: synchronized ITC with CPU 0 (last diff -2 cycles, maxerr 308 cycles)
CPU 7: base freq=199.459MHz, ITC ratio=8/4, ITC freq=398.919MHz+/--1ppm
Calibrating delay loop... 3130.52 BogoMIPS (lpj=1527808)
Brought up 8 CPUs
Total of 8 processors activated (25046.16 BogoMIPS).
checking if image is initramfs... it is
Freeing initrd memory: 1552kB freed
NET: Registered protocol family 16
ACPI: Subsystem revision 20040816
ACPI: Interpreter enabled
ACPI: Using IOSAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (00:00)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: Using ACPI for IRQ routing
GSI 20 (level, low) -> CPU 0 (0x0000) vector 48
ACPI: PCI interrupt 0000:00:01.3[A] -> GSI 20 (level, low) -> IRQ 48
GSI 28 (level, low) -> CPU 1 (0x0100) vector 49
ACPI: PCI interrupt 0000:00:03.0[A] -> GSI 28 (level, low) -> IRQ 49
GSI 32 (level, low) -> CPU 2 (0x0200) vector 50
ACPI: PCI interrupt 0000:00:04.0[A] -> GSI 32 (level, low) -> IRQ 50
perfmon: version 2.0 IRQ 238
perfmon: Generic PMU detected, 8 PMCs, 4 PMDs, 4 counters (32 bits)
PAL Information Facility v0.5
perfmon: added sampling format default_format
perfmon_default_smpl: default_format v2.0 registered
audit: initializing netlink socket (disabled)
audit(1240842100.314:1): initialized
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 2048 (order 0, 16384 bytes)
SELinux: Registering netfilter hooks
Initializing Cryptographic API
ksign: Installing public key data
Loading keyring
- Added public key 453B8631FE6159D3
- User ID: Red Hat, Inc. (Kernel Module GPG key)
Limiting direct PCI/PCI transfers.
PCI: PIIX3: Enabling Passive Release on 0000:00:01.0
Activating ISA DMA hang workarounds.
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
ACPI: Processor [CPU0] (supports C1)
ACPI: Processor [CPU1] (supports C1)
ACPI: Processor [CPU2] (supports C1)
ACPI: Processor [CPU3] (supports C1)
EFI Time Services Driver v0.4
Linux agpgart interface v0.100 (c) Dave Jones
serio: i8042 AUX port at 0x60,0x64 irq 36
serio: i8042 KBD port at 0x60,0x64 irq 32
Serial: 8250/16550 driver $Revision: 1.90 $ 20 ports, IRQ sharing enabled
ttyS0 at I/O 0x3f8 (irq = 44) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
divert: not allocating divert_blk for non-ethernet device lo
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
PIIX3: IDE controller at PCI slot 0000:00:01.1
PIIX3: chipset revision 0
PIIX3: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xc000-0xc007, BIOS settings: hda:pio, hdb:pio
ide1: BM-DMA at 0xc008-0xc00f, BIOS settings: hdc:pio, hdd:pio
Probing IDE interface ide0...
Probing IDE interface ide1...
Probing IDE interface ide0...
Probing IDE interface ide1...
Probing IDE interface ide2...
Probing IDE interface ide3...
Probing IDE interface ide4...
Probing IDE interface ide5...
ide-floppy driver 0.99.newide
usbcore: registered new driver hiddev
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.0:USB HID core driver
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard on isa0060/serio0
input: ImExPS/2 Generic Explorer Mouse on isa0060/serio1
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
EFI Variables Facility v0.08 2004-May-17
NET: Registered protocol family 2
IP: routing cache hash table of 8192 buckets, 128Kbytes
TCP: Hash tables configured (established 65536 bind 65536)
Initializing IPsec netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
Freeing unused kernel memory: 384kB freed
ACPI: PCI interrupt 0000:00:03.0[A] -> GSI 28 (level, low) -> IRQ 49
suspend: event channel 11
xen-vbd: registered block device major 3
Using cfq io scheduler
hda: hda1<6>netfront: Initialising virtual ethernet driver.
hda2
divert: allocating divert_blk for eth0
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
request_module: runaway loop modprobe binfmt-429d
request_module: runaway loop modprobe binfmt-429d
request_module: runaway loop modprobe binfmt-429d
request_module: runaway loop modprobe binfmt-429d
request_module: runaway loop modprobe binfmt-429d
_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-devel
|
Home