Hi. Thanks for your response.
1) The following packages are installed:
a) iproute-2.6.18-4.el5
b) bridge-utils-1.1-2
c) udev-095-14.9.el5 (I don't know if hotplug is needed on RH5.1)
2) xvc0 is configured in securetty, but since I only have a serial console, I
use xencons=ttyS0 console=ttyS0 and direct all output to the serial console.
3) I generated the initrd like this:
DEST=/boot/efi/efi/redhat
rm -f $DEST/initrd-2.6.18.8.img
depmod 2.6.18.8-xen
mkinitrd --builtin=ata_piix --builtin=mptbase --builtin=mptspi \
--builtin=ehci-hcd --builtin=ohci-hcd --builtin=uhci-hcd \
--builtin=qla2xxx \
$DEST/initrd-2.6.18.8.img 2.6.18.8-xen
4) I added the dom0_mem and dom0_max_vcpus to the elilo entry (like this):
append="com1=115200,8n1 dom0_mem=1024M dom0_max_vcpus=2 -- nomca xencons=ttyS0
console=ttyS0"
The crash still happens and the message looks the same:
Call Trace:
[<a00000010001dac0>] show_stack+0x40/0xa0
sp=e000000009b3f9f0 bsp=e000000009b391c8
[<a00000010001db50>] dump_stack+0x30/0x60
sp=e000000009b3fbc0 bsp=e000000009b391b0
[<a0000001000e7e90>] move_native_irq+0xd0/0x360
sp=e000000009b3fbc0 bsp=e000000009b39178
[<a0000001006b3060>] ack_dynirq+0x40/0x100
sp=e000000009b3fbc0 bsp=e000000009b39158
[<a0000001000e2da0>] __do_IRQ+0x100/0x420
sp=e000000009b3fbc0 bsp=e000000009b39110
[<a0000001006b3660>] evtchn_do_upcall+0x1c0/0x320
sp=e000000009b3fbc0 bsp=e000000009b39078
[<a00000010006cde0>] xen_event_callback+0x380/0x3c0
sp=e000000009b3fbc0 bsp=e000000009b39078
BUG: warning at
/root/xen-unstable.hg/linux-2.6.18-xen.hg/kernel/irq/migration.c:27/move_native_irq()
Best regards,
---Kayvan
-----Original Message-----
From: Mu, Qin [mailto:qin.mu@xxxxxxxxx]
Sent: Monday, December 03, 2007 6:12 PM
To: Kayvan Sylvan
Cc: You, Yongkang
Subject: RE: [Xen-ia64-devel] Xen-3.2-unstable crash on NEC box
Hi, Kayvan
Let's try the following ways to remove the crash.
1. Firstly, please check if the following tools have installed prior to running
Xen:
a. Iproute2 package
b. Linux Bridge-utils (http://bridge.sourceforge.net)
c. Linux hotplug system (http://linux-hotplug.sourceforge.net)
2. Please check if xvc0 is configured in both /etc/securetty and /etc/inittab
to get dom0 login terminal.
a) Add the following line in /etc/inittab file.
<ID>:2345:respawn:/sbin/mingetty xvc0, where the <ID> should be
replaced by a unique number in your script.
b) Append “xvc0” at the end of /etc/securetty file.
3. If crash still occurs, would you tell how you got the initrd-2.6.18.8.img?
The Xen kernel specific initrd.img is expected to be configured in elilo.conf
file.
4. Another tip here, please try the following append line in elilo.conf file:
append="dom0_mem=1024M dom0_max_vcpus=2 -- nomca console=tty"
Best Regards,
Amy, Mu
-----Original Message-----
From: xen-ia64-devel-bounces@xxxxxxxxxxxxxxxxxxx
[mailto:xen-ia64-devel-bounces@xxxxxxxxxxxxxxxxxxx] On Behalf Of Kayvan Sylvan
Sent: 2007年12月4日 8:33
To: Xen-ia64-devel
Subject: [Xen-ia64-devel] Xen-3.2-unstable crash on NEC box
Hi everyone.
I'm trying to bring up the xen-ia64 unstable on a new machine.
I'm running Redhat 5.1 and I grabbed and compiled the latest sources
from the following:
http://xenbits.xensource.com/ext/ia64/xen-unstable.hg
http://xenbits.xensource.com/ext/ia64/linux-2.6.18-xen.hg
After installing the various bits in the right places, my elilo.conf
entry looks like this:
image=vmlinuz-2.6.18.8-xen
vmm=xen-3.2-unstable.gz
label=xen32
initrd=initrd-2.6.18.8.img
read-only
root=/dev/VolGroup00/LogVol00
append="com1=115200,8n1 -- nomca xencons=ttyS0 console=ttyS0
rhgb quiet"
Bringing up the machine looks okay --- there are iptables errors, etc.
--- but I figure I want to get the machine up first in some way and fix
each problem afterwards. It looks fine all the way till about a fraction
of a second after the login: prompt appears.
If anyone has any ideas of what I should try, please let me know!
Thanks!
Best regards,
---Kayvan Sylvan, Platform Solutions Inc.
(the boot log follows)
------------------------------------------------------------------------
-----------------------------
Uncompressing Linux... done
Loading file initrd-2.6.18.8.img...done
Loading file vmlinuz-2.6.18.8-xen...done
Uncompressing... done
__ __ _____ ____ _ _ _
\ \/ /___ _ __ |___ / |___ \ _ _ _ __ ___| |_ __ _| |__ | | ___
\ // _ \ '_ \ |_ \ __) |__| | | | '_ \/ __| __/ _` | '_ \| |/ _
\
/ \ __/ | | | ___) | / __/|__| |_| | | | \__ \ || (_| | |_) | |
__/
/_/\_\___|_| |_| |____(_)_____| \__,_|_|
|_|___/\__\__,_|_.__/|_|\___|
(XEN) Xen version 3.2-unstable (root@) (gcc version 4.1.2 20070626 (Red
Hat 4.1.2-14)) Mon Dec 3 14:18:52 PST 2007
(XEN) Latest ChangeSet: Fri Nov 30 08:54:33 2007 -0700
16501:32ec5dbe2978
(XEN) Xen command line: BOOT_IMAGE=scsi0:EFI\redhat\xen-3.2-unstable.gz
com1=115200,8n1
(XEN) xen image pstart: 0x4000000, xenheap pend: 0x8000000
(XEN) Xen patching physical address access by offset: 0xfc00000000000000
(XEN) find_memory: efi_memmap_walk returns max_page=90000
(XEN) Before xen_heap_start: f0000000041e0a20
(XEN) After xen_heap_start: f0000000041f8000
(XEN) Init boot pages: 0x10000d8 -> 0x4000000.
(XEN) Init boot pages: 0x8000000 -> 0x3c000000.
(XEN) Init boot pages: 0x40000000 -> 0x7ba36000.
(XEN) Init boot pages: 0x7ca2e8d8 -> 0x7d08a010.
(XEN) Init boot pages: 0x7d08a070 -> 0x7d08df7e.
(XEN) Init boot pages: 0x7d08dfc0 -> 0x7d090000.
(XEN) Init boot pages: 0x7d4cf170 -> 0x7d4d6010.
(XEN) Init boot pages: 0x7d4d6a60 -> 0x7df38000.
(XEN) Init boot pages: 0x7f300000 -> 0x7f9ec000.
(XEN) Init boot pages: 0x7fa58000 -> 0x7fb84000.
(XEN) Init boot pages: 0x7fc00000 -> 0x7fcf8000.
(XEN) Init boot pages: 0x7fd88000 -> 0x7fd8c000.
(XEN) Init boot pages: 0x80000000 -> 0xc0000000.
(XEN) Init boot pages: 0x100000000 -> 0x240000000.
(XEN) System RAM: 8088MB (8282416kB)
(XEN) size of virtual frame_table: 20288kB
(XEN) virtual machine to physical table: f6ffffffffb80000 size: 4096kB
(XEN) max_page: 0x90000
(XEN) allocating frame table/mpt table at mfn 0.
(XEN) Xen heap: 62MB (63520kB)
(XEN) Reserving non-aligned node boundary @ mfn 65536
(XEN) Reserving non-aligned node boundary @ mfn 262144
(XEN) Domain heap initialised: DMA width 32 bits
(XEN) avail:0x3170074000000000,
status:0x74000000000,control:0x3170000000000000, vm?0x10000000000
(XEN) WARNING: no opcode provided from hardware(0)!!!
(XEN) vm buffer size: 1048576, order: 6
(XEN) vm_buffer: 0xf400000007e00000
(XEN) register_intr: changing vector 41 from IO-SAPIC-edge to
IO-SAPIC-level
(XEN) register_intr: changing vector 39 from IO-SAPIC-edge to
IO-SAPIC-level
(XEN) register_intr: changing vector 38 from IO-SAPIC-edge to
IO-SAPIC-level
(XEN) register_intr: changing vector 35 from IO-SAPIC-edge to
IO-SAPIC-level
(XEN) Using scheduler: SMP Credit Scheduler (credit)
(XEN) Time Zone is not specified on EFIRTC
(XEN) Time init:
(XEN) .... System Time: 467496ns
(XEN) .... scale: 27FEDFAC5
(XEN) num_online_cpus=1, max_cpus=64
(XEN) Fixed BSP b0 value from CPU 1
(XEN) Brought up 8 CPUs
(XEN) the number of physical stacked general
registers(RSE.N_STACKED_PHYS) = 96
(XEN) xenoprof: using perfmon.
(XEN) perfmon: version 2.0 IRQ 238
(XEN) perfmon: Montecito PMU detected, 27 PMCs, 35 PMDs, 12 counters (47
bits)
(XEN) Maximum number of domains: 63; 18 RID bits per domain
(XEN) *** LOADING DOMAIN 0 ***
(XEN) Maximum permitted dom0 size: 7973MB
(XEN) Dom0 kernel: 64-bit, lsb, paddr 0x4000000 -> 0x5423970
(XEN) METAPHYSICAL MEMORY ARRANGEMENT:
(XEN) Kernel image: 4000000->5423970
(XEN) Entry address: 400ff20
(XEN) Init. ramdisk: 5428000 len 43f170
(XEN) Start info.: 5424000->5428000
(XEN) Dom0 max_vcpus=4
(XEN) Dom0: 0xf000000007c74080
(XEN) enable lsapic entry: 0xf00000007df3c484
(XEN) enable lsapic entry: 0xf00000007df3c490
(XEN) enable lsapic entry: 0xf00000007df3c49c
(XEN) enable lsapic entry: 0xf00000007df3c4a8
(XEN) DISABLE lsapic entry: 0xf00000007df3c4b4
(XEN) DISABLE lsapic entry: 0xf00000007df3c4c0
(XEN) DISABLE lsapic entry: 0xf00000007df3c4cc
(XEN) DISABLE lsapic entry: 0xf00000007df3c4d8
(XEN) ACPI_INTERRUPT_CPEI disabled for Domain0
(XEN) Success Disabling SRAT
(XEN) Success Disabling SLIT
(XEN) Domain0 EFI passthrough: MPS=0x7ef28580 ACPI 2.0=0x7df3c140
ACPI=0x7df83988 SMBIOS=0xf4f10
(XEN) __assign_domain_page:956 WARNING can't assign page domain
0xf000000007c74080 id 0
(XEN) already assigned pte_val 0x00100000ff0806e1
(XEN) mpaddr 0x00000000ff080000 physaddr 0x00000000ff080000 flags 0x2
(XEN) __assign_domain_page:956 WARNING can't assign page domain
0xf000000007c74080 id 0
(XEN) already assigned pte_val 0x00100000ff2806e1
(XEN) mpaddr 0x00000000ff280000 physaddr 0x00000000ff280000 flags 0x2
(XEN) __assign_domain_page:956 WARNING can't assign page domain
0xf000000007c74080 id 0
(XEN) already assigned pte_val 0x00100000ff4006e1
(XEN) mpaddr 0x00000000ff400000 physaddr 0x00000000ff400000 flags 0x2
(XEN) __assign_domain_page:956 WARNING can't assign page domain
0xf000000007c74080 id 0
(XEN) already assigned pte_val 0x00100000ff4406e1
(XEN) mpaddr 0x00000000ff440000 physaddr 0x00000000ff440000 flags 0x2
(XEN) __assign_domain_page:956 WARNING can't assign page domain
0xf000000007c74080 id 0
(XEN) already assigned pte_val 0x00100000ff58c6e1
(XEN) mpaddr 0x00000000ff58c000 physaddr 0x00000000ff58c000 flags 0x2
(XEN) Scrubbing Free RAM: .......................................done.
(XEN) Xen trace buffers: disabled
(XEN) Std. Loglevel: Errors and warnings
(XEN) Guest Loglevel: Nothing (Rate-limited: Errors and warnings)
(XEN) *** Serial input -> DOM0 (type 'CTRL-a' three times to switch
input to Xen)
(XEN) Freed 128kB init memory.
(XEN) __assign_domain_page:956 WARNING can't assign page domain
0xf000000007c74080 id 0
(XEN) already assigned pte_val 0x00100000ff0806e1
(XEN) mpaddr 0x00000000ff080000 physaddr 0x00000000ff080000 flags 0x2
(XEN) __assign_domain_page:956 WARNING can't assign page domain
0xf000000007c74080 id 0
(XEN) already assigned pte_val 0x00100000ff2806e1
(XEN) mpaddr 0x00000000ff280000 physaddr 0x00000000ff280000 flags 0x2
(XEN) __assign_domain_page:956 WARNING can't assign page domain
0xf000000007c74080 id 0
(XEN) already assigned pte_val 0x00100000ff4006e1
(XEN) mpaddr 0x00000000ff400000 physaddr 0x00000000ff400000 flags 0x2
(XEN) __assign_domain_page:956 WARNING can't assign page domain
0xf000000007c74080 id 0
(XEN) already assigned pte_val 0x00100000ff4406e1
(XEN) mpaddr 0x00000000ff440000 physaddr 0x00000000ff440000 flags 0x2
(XEN) __assign_domain_page:956 WARNING can't assign page domain
0xf000000007c74080 id 0
(XEN) already assigned pte_val 0x00100000ff58c6e1
(XEN) mpaddr 0x00000000ff58c000 physaddr 0x00000000ff58c000 flags 0x2
(XEN) __assign_domain_page:956 WARNING can't assign page domain
0xf000000007c74080 id 0
(XEN) already assigned pte_val 0x081000023cf146e1
(XEN) mpaddr 0x0000200000000000 physaddr 0x0000200000000000 flags 0x2
(XEN) vcpu_set_itc: Setting ar.itc is currently disabled (this message
is only displayed once)
iosapic_register_platform_intr: invalid int type 0xff
(XEN) mm.c:575:d0 Warning: UC to WB for mpaddr=7df3c140
(XEN) mm.c:575:d0 Warning: UC to WB for mpaddr=7dfcaeb8
(XEN) mm.c:575:d0 Warning: UC to WB for mpaddr=7dfcc000
(XEN) mm.c:575:d0 Warning: UC to WB for mpaddr=7dfd0000
(XEN) mm.c:575:d0 Warning: UC to WB for mpaddr=7dfd4000
(XEN) mm.c:575:d0 Warning: UC to WB for mpaddr=7dfd8000
(XEN) mm.c:575:d0 Warning: UC to WB for mpaddr=7dfdc000
(XEN) mm.c:575:d0 Warning: UC to WB for mpaddr=7dfe0000
(XEN) mm.c:575:d0 Warning: UC to WB for mpaddr=7dfe4000
(XEN) mm.c:575:d0 Warning: UC to WB for mpaddr=7dfe8000
(XEN) printk: 27 messages suppressed.
(XEN) mm.c:575:d0 Warning: UC to WB for mpaddr=7df3c140
(XEN) mm.c:575:d0 Warning: UC to WB for mpaddr=7dfcaeb8
(XEN) printk: 62 messages suppressed.
(XEN) mm.c:575:d0 Warning: UC to WB for mpaddr=7dfdc5ab
(XEN) printk: 47 messages suppressed.
(XEN) mm.c:575:d0 Warning: UC to WB for mpaddr=7dfd585f
(XEN) printk: 32 messages suppressed.
(XEN) mm.c:575:d0 Warning: UC to WB for mpaddr=7dfdf58a
(XEN) printk: 96 messages suppressed.
(XEN) mm.c:575:d0 Warning: UC to WB for mpaddr=7dfea950
ACPI: Invalid PBLK length [0]
ACPI: Invalid PBLK length [0]
ACPI: Invalid PBLK length [0]
ACPI: Invalid PBLK length [0]
ACPI: Getting cpuindex for acpiid 0x8
ACPI: Getting cpuindex for acpiid 0xa
ACPI: Getting cpuindex for acpiid 0xc
ACPI: Getting cpuindex for acpiid 0xe
(XEN) __assign_domain_page:956 WARNING can't assign page domain
0xf000000007c74080 id 0
(XEN) already assigned pte_val 0x00100000ff0806e1
(XEN) mpaddr 0x00000000ff080000 physaddr 0x00000000ff080000 flags 0x2
(XEN) printk: 24 messages suppressed.
(XEN) mm.c:575:d0 Warning: UC to WB for mpaddr=7dfee590
qla2xxx 0000:09:02.0: Firmware image unavailable.
qla2xxx 0000:09:02.0: Firmware images can be retrieved from:
ftp://ftp.qlogic.com/outgoing/linux/firmware/.
qla2xxx 0000:09:02.0: Attempting to load (potentially outdated) firmware
from flash.
(XEN) printk: 6 messages suppressed.
(XEN) mm.c:575:d0 Warning: UC to WB for mpaddr=7dfeeb7b
(XEN) mm.c:575:d0 Warning: UC to WB for mpaddr=7dfd33f7
(XEN) mm.c:575:d0 Warning: UC to WB for mpaddr=7dfd7b7e
(XEN) mm.c:575:d0 Warning: UC to WB for mpaddr=7dfc85fe
(XEN) mm.c:575:d0 Warning: UC to WB for mpaddr=7df9b1e9
(XEN) mm.c:575:d0 Warning: UC to WB for mpaddr=7df97710
qla2xxx 0000:09:02.1: Firmware image unavailable.
qla2xxx 0000:09:02.1: Firmware images can be retrieved from:
ftp://ftp.qlogic.com/outgoing/linux/firmware/.
qla2xxx 0000:09:02.1: Attempting to load (potentially outdated) firmware
from flash.
(XEN) printk: 1 messages suppressed.
(XEN) mm.c:575:d0 Warning: UC to WB for mpaddr=7dfeb192
(XEN) mm.c:575:d0 Warning: UC to WB for mpaddr=7dfd33f7
(XEN) mm.c:575:d0 Warning: UC to WB for mpaddr=7dfd7b7e
(XEN) mm.c:575:d0 Warning: UC to WB for mpaddr=7dfc85fe
(XEN) mm.c:575:d0 Warning: UC to WB for mpaddr=7df9b1e9
(XEN) mm.c:575:d0 Warning: UC to WB for mpaddr=7df97710
(XEN) printk: 1 messages suppressed.
(XEN) mm.c:575:d0 Warning: UC to WB for mpaddr=7dfeb77d
no UART detected at 0x1
specify port
Red Hat nash version 5.1.19.6 starting
Reading all physical volumes. This may take a while...
Found volume group "VolGroup00" using metadata type lvm2
2 logical volume(s) in volume group "VolGroup00" now active
Welcome to Red Hat Enterprise Linux Server
Press 'I' to enter interactive startup.
Setting clock (utc): Mon Dec 3 16:09:41 PST 2007 [ OK ]
Starting udev: [ OK ]
Setting hostname nec1p6: [ OK ]
raidautorun: failed to open /dev/md0: No such device or address
Setting up Logical Volume Management: 2 logical volume(s) in volume
group "VolGroup00" now active
[ OK ]
Checking filesystems
Checking all file systems.
[/sbin/fsck.ext3 (1) -- /] fsck.ext3 -a /dev/VolGroup00/LogVol00
/dev/VolGroup00/LogVol00: clean, 229160/70909952 files, 4597732/70909952
blocks
[ OK ]
Remounting root filesystem in read-write mode: [ OK ]
Mounting local filesystems: [ OK ]
Enabling local filesystem quotas: [ OK ]
rm: cannot remove `/var/run/xend/boot': Is a directory
Enabling /etc/fstab swaps: [ OK ]
INIT: Entering runlevel: 3
Entering non-interactive startup
Starting monitoring for VG VolGroup00: /dev/hda: open failed:
Read-only file system
2 logical volume(s) in volume group "VolGroup00" monitored
[ OK ]
Starting background readahead: [ OK ]
Checking for hardware changes [ OK ]
Applying ip6tables firewall rules: modprobe: FATAL: Module ip6_tables
not found.
ip6tables-restore v1.3.5: ip6tables-restore: unable to initializetable
'filter'
Error occurred at line: 3
Try `ip6tables-restore -h' or 'ip6tables-restore --help' for more
information.
[FAILED]
Applying iptables firewall rules: modprobe: FATAL: Module ip_tables not
found.
iptables-restore v1.3.5: iptables-restore: unable to initializetable
'filter'
Error occurred at line: 3
Try `iptables-restore -h' or 'iptables-restore --help' for more
information.
[FAILED]
Bringing up loopback interface: [ OK ]
Bringing up interface eth0: [ OK ]
Starting auditd: [FAILED]
Starting system logger: [ OK ]
Starting kernel logger: [ OK ]
Starting irqbalance: [ OK ]
Starting portmap: [ OK ]
Starting NFS statd: [ OK ]
Starting RPC idmapd: FATAL: Module sunrpc not found.
FATAL: Error running install command for sunrpc
Error: RPC MTAB does not exist.
Starting system message bus: [ OK ]
Can't open RFCOMM control socket: Address family not supported by
protocol
Mounting other filesystems: [ OK ]
Starting PC/SC smart card daemon (pcscd): [ OK ]
Starting hidd: Can't open HIDP control socket: Address family not
supported by protocol
[FAILED]
Starting autofs: Starting automount: automount: kernel protocol version
5.00 or above required.
[FAILED]
[FAILED]
Starting acpi daemon: [ OK ]
Starting hpiod: [ OK ]
Starting hpssd: [ OK ]
Starting sshd: [ OK ]
Starting cups: [ OK ]
Starting sendmail: [ OK ]
Starting sm-client: [ OK ]
Starting console mouse services: [ OK ]
Starting crond: [ OK ]
Starting xfs: [ OK ]
Starting anacron: [ OK ]
Starting atd: [ OK ]
Starting salinfo_decode_all: [ OK ]
Starting Red Hat Network Daemon: [ OK ]
Starting yum-updatesd: [ OK ]
Starting Avahi daemon... [ OK ]
Starting HAL daemon: [ OK ]
Starting smartd: [ OK ]
Red Hat Enterprise Linux Server release 5.1 (Tikanga)
Kernel 2.6.18.8-xen on an ia64
nec1p6 login: BUG: warning at
/root/xen-unstable.hg/linux-2.6.18-xen.hg/kernel/irq/migration.c:27/move
_native_irq()
Call Trace:
[<a00000010001dac0>] show_stack+0x40/0xa0
sp=a000000100d739e0 bsp=a000000100d6d1f0
[<a00000010001db50>] dump_stack+0x30/0x60
sp=a000000100d73bb0 bsp=a000000100d6d1d8
[<a0000001000e7e90>] move_native_irq+0xd0/0x360
sp=a000000100d73bb0 bsp=a000000100d6d1a0
[<a0000001006b3060>] ack_dynirq+0x40/0x100
sp=a000000100d73bb0 bsp=a000000100d6d180
[<a0000001000e2da0>] __do_IRQ+0x100/0x420
sp=a000000100d73bb0 bsp=a000000100d6d138
[<a0000001006b3660>] evtchn_do_upcall+0x1c0/0x320
sp=a000000100d73bb0 bsp=a000000100d6d0a0
[<a00000010006cde0>] xen_event_callback+0x380/0x3c0
sp=a000000100d73bb0 bsp=a000000100d6d0a0
BUG: warning at
/root/xen-unstable.hg/linux-2.6.18-xen.hg/kernel/irq/migration.c:27/move
_native_irq()
Call Trace:
[<a00000010001dac0>] show_stack+0x40/0xa0
sp=e0000001449179f0 bsp=e0000001449111c8
[<a00000010001db50>] dump_stack+0x30/0x60
sp=e000000144917bc0 bsp=e0000001449111b0
[<a0000001000e7e90>] move_native_irq+0xd0/0x360
sp=e000000144917bc0 bsp=e000000144911178
[<a0000001006b3060>] ack_dynirq+0x40/0x100
sp=e000000144917bc0 bsp=e000000144911158
[<a0000001000e2da0>] __do_IRQ+0x100/0x420
sp=e000000144917bc0 bsp=e000000144911110
[<a0000001006b3660>] evtchn_do_upcall+0x1c0/0x320
sp=e000000144917bc0 bsp=e000000144911078
[<a00000010006cde0>] xen_event_callback+0x380/0x3c0
sp=e000000144917bc0 bsp=e000000144911078
BUG: warning at
/root/xen-unstable.hg/linux-2.6.18-xen.hg/kernel/irq/migration.c:27/move
_native_irq()
Call Trace:
[<a00000010001dac0>] show_stack+0x40/0xa0
sp=a000000100d739e0 bsp=a000000100d6d1f0
[<a00000010001db50>] dump_stack+0x30/0x60
sp=a000000100d73bb0 bsp=a000000100d6d1d8
[<a0000001000e7e90>] move_native_irq+0xd0/0x360
sp=a000000100d73bb0 bsp=a000000100d6d1a0
[<a0000001006b3060>] ack_dynirq+0x40/0x100
sp=a000000100d73bb0 bsp=a000000100d6d180
[<a0000001000e2da0>] __do_IRQ+0x100/0x420
sp=a000000100d73bb0 bsp=a000000100d6d138
[<a0000001006b3660>] evtchn_do_upcall+0x1c0/0x320
sp=a000000100d73bb0 bsp=a000000100d6d0a0
[<a00000010006cde0>] xen_event_callback+0x380/0x3c0
sp=a000000100d73bb0 bsp=a000000100d6d0a0
BUG: warning at
/root/xen-unstable.hg/linux-2.6.18-xen.hg/kernel/irq/migration.c:27/move
_native_irq()
Call Trace:
[<a00000010001dac0>] show_stack+0x40/0xa0
sp=e0000001449179f0 bsp=e0000001449111c8
[<a00000010001db50>] dump_stack+0x30/0x60
sp=e000000144917bc0 bsp=e0000001449111b0
[<a0000001000e7e90>] move_native_irq+0xd0/0x360
sp=e000000144917bc0 bsp=e000000144911178
[<a0000001006b3060>] ack_dynirq+0x40/0x100
sp=e000000144917bc0 bsp=e000000144911158
[<a0000001000e2da0>] __do_IRQ+0x100/0x420
sp=e000000144917bc0 bsp=e000000144911110
[<a0000001006b3660>] evtchn_do_upcall+0x1c0/0x320
sp=e000000144917bc0 bsp=e000000144911078
[<a00000010006cde0>] xen_event_callback+0x380/0x3c0
sp=e000000144917bc0 bsp=e000000144911078
BUG: warning at
/root/xen-unstable.hg/linux-2.6.18-xen.hg/kernel/irq/migration.c:27/move
_native_irq()
Call Trace:
[<a00000010001dac0>] show_stack+0x40/0xa0
sp=e0000001448b79f0 bsp=e0000001448b11c8
[<a00000010001db50>] dump_stack+0x30/0x60
sp=e0000001448b7bc0 bsp=e0000001448b11b0
[<a0000001000e7e90>] move_native_irq+0xd0/0x360
sp=e0000001448b7bc0 bsp=e0000001448b1178
[<a0000001006b3060>] ack_dynirq+0x40/0x100
sp=e0000001448b7bc0 bsp=e0000001448b1158
[<a0000001000e2da0>] __do_IRQ+0x100/0x420
sp=e0000001448b7bc0 bsp=e0000001448b1110
[<a0000001006b3660>] evtchn_do_upcall+0x1c0/0x320
sp=e0000001448b7bc0 bsp=e0000001448b1078
[<a00000010006cde0>] xen_event_callback+0x380/0x3c0
sp=e0000001448b7bc0 bsp=e0000001448b1078
BUG: warning at
/root/xen-unstable.hg/linux-2.6.18-xen.hg/kernel/irq/migration.c:27/move
_native_irq()
_______________________________________________
Xen-ia64-devel mailing list
Xen-ia64-devel@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-ia64-devel
_______________________________________________
Xen-ia64-devel mailing list
Xen-ia64-devel@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-ia64-devel
|
Home