[Xen-ia64-devel] Re: [PATCH] Only one serial console on Tiger2

On Thu, 2007-02-15 at 19:30 +0900, Horms wrote:
> Hi Alex,
> 
> I did a bit of research and it seems that the Tiger2, like the Tiger4,
> only has one serial port. So we can use common code for both of them,
> having com1=0x2f8.
> 
> Tested on a Tiger 2 with the following command line, which is only
> needed for the linux dom0 console -- xen and linux dom0 boot messages
> come over serial anyway:
> 
> "-- console=ttyS0"

Hi Simon,

   Great, thanks for investigating.  Once com1 is set to 0x2f8, you
actually shouldn't even need to specify a console= for dom0.  This patch
will automatically set your preferred console to the xencons device:

http://xenbits.xensource.com/ext/xen-ia64-unstable.hg?cs=81c4f90695a8

Of course if you want to get the console mirrored on both VGA and
xencons as your previous cmdline did, you'll still need to specify both.
Thanks,

        Alex
-- 
Alex Williamson                             HP Open Source & Linux Org.

_______________________________________________
Xen-ia64-devel mailing list
Xen-ia64-devel@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-ia64-devel

<Prev in Thread]

Current Thread

[Next in Thread>

Previous by Date:

[Xen-ia64-devel] [PATCH] Only one serial console on Tiger2, Horms

Next by Date:

[Xen-ia64-devel] [PATCH] stacked pal call for VTi, tgingold

Previous by Thread:

[Xen-ia64-devel] [PATCH] Only one serial console on Tiger2, Horms

Next by Thread:

[Xen-ia64-devel] Re: [PATCH] Only one serial console on Tiger2, Horms

Indexes:

[Date] [Thread] [Top] [All Lists]