[root@vmi02 ~]# xm crea /xen/rhel4-as -c Using config file "/xen/rhel4-as". Started domain rhel4-sakaia0 Dentry cache hash table entries: 65536 (order: 5, 524288 bytes) Inode-cache hash table entries: 32768 (order: 4, 262144 bytes) Software IO TLB disabled Memory: 481504k/507888k available (10487k code, 25728k reserved, 4418k data, 288k init) McKinley Errata 9 workaround not needed; disabling it register RESCHEDULE_VECTOR (RESCHED0) to xen irq (256) register IPI_VECTOR (IPI0) to xen irq (257) Percpu irq 238 is unsupported by xen! register VIRQ_ITC (timer0) to xen irq (258) Mount-cache hash table entries: 1024 Boot processor id 0x0/0x0 Brought up 1 CPUs Total of 1 processors activated (2385.51 BogoMIPS). migration_cost=0 checking if image is initramfs... it is Freeing initrd memory: 3088kB freed grant table at e000010000104000 Grant table initialized NET: Registered protocol family 16 ACPI: bus type pci registered Brought up 1 CPUs ACPI: Subsystem revision 20060127 ACPI: SCI (ACPI GSI 0) not registered ACPI: Interpreter enabled ACPI: Using IOSAPIC for interrupt routing xen_mem: Initialising balloon driver. SCSI subsystem initialized usbcore: registered new driver usbfs usbcore: registered new driver hub perfmon: version 2.0 IRQ 238 perfmon: Itanium 2 PMU detected, 16 PMCs, 18 PMDs, 4 counters (47 bits) PAL Information Facility v0.5 perfmon: added sampling format default_format perfmon_default_smpl: default_format v2.0 registered Installing knfsd (copyright (C) 1996 okir@xxxxxxxxxxxx). SGI XFS with large block/inode numbers, no debug enabled Initializing Cryptographic API io scheduler noop registered io scheduler anticipatory registered (default) io scheduler deadline registered io scheduler cfq registered pci_hotplug: PCI Hot Plug PCI Core version: 0.5 acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 ACPI: Power Button (FF) [PWRF] ACPI: Sleep Button (FF) [SLPF] EFI Time Services Driver v0.4 Linux agpgart interface v0.101 (c) Dave Jones [drm] Initialized drm 1.0.1 20051102 i8042.c: i8042 controller self test timeout. RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize loop: loaded (max 8 devices) HP CISS Driver (v 2.6.10) Intel(R) PRO/1000 Network Driver - version 6.3.9-k4 Copyright (c) 1999-2005 Intel Corporation. e100: Intel(R) PRO/100 Network Driver, 3.5.10-k2-NAPI e100: Copyright(c) 1999-2005 Intel Corporation tun: Universal TUN/TAP device driver, 1.6 tun: (C) 1999-2004 Max Krasnyansky arcnet: v3.93 BETA 2000/04/29 - by Avery Pennarun et al. netconsole: not configured, aborting Linux video capture interface: v1.00 Xen virtual console successfully installed as xvc0 Event-channel device installed. netfront: Initialising virtual ethernet driver. input: Xen Virtual Keyboard/Mouse as /class/input/input0 Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=xx ide-floppy driver 0.99.newide st: Version 20050830, fixed bufsize 32768, s/g segs 256 osst :I: Tape driver with OnStream support version 0.99.3 osst :I: $Id: osst.c,v 1.73 2005/01/01 21:13:34 wriede Exp $ Fusion MPT base driver 3.03.07 Copyright (c) 1999-2005 LSI Logic Corporation Fusion MPT SPI Host driver 3.03.07 Fusion MPT SAS Host driver 3.03.07 usbmon: debugfs is not available USB Universal Host Controller Interface driver v2.3 Initializing USB Mass Storage driver... usbcore: registered new driver usb-storage USB Mass Storage support registered. usbcore: registered new driver hiddev usbcore: registered new driver usbhid drivers/usb/input/hid-core.c: v2.6:USB HID core driver mice: PS/2 mouse device common for all mice i2c /dev entries driver device-mapper: 4.5.0-ioctl (2005-10-04) initialised: dm-devel@xxxxxxxxxx EFI Variables Facility v0.08 2004-May-17 efivars: get_next_variable: status=8000000000000003 Advanced Linux Sound Architecture Driver Version 1.0.11rc2 (Wed Jan 04 08:57:20 2006 UTC). no UART detected at 0x1 specify port snd_mpu401: probe of snd_mpu401.0 failed with error -22 ALSA device list: #0: Dummy 1 #1: Virtual MIDI Card 1 NET: Registered protocol family 2 Registering block device major 3 blkfront: hda1: barriers enabled netfront: device eth0 has copying receive path. IP route cache hash table entries: 4096 (order: 1, 32768 bytes) TCP established hash table entries: 16384 (order: 4, 262144 bytes) TCP bind hash table entries: 16384 (order: 4, 262144 bytes) TCP: Hash tables configured (established 16384 bind 16384) TCP reno registered TCP bic registered NET: Registered protocol family 1 NET: Registered protocol family 17 Bridge firewalling registered xen privcmd uses pseudo physical addr range [0x20000000, 0x3ffff000000] (4193776MB) Xen p2m: assign p2m table of [0x0000000000000000, 0x0000000020000000) Xen p2m: to [0x0000000020000000, 0x0000000023ffc000) (65536 KBytes) Freeing unused kernel memory: 288kB freed Red Hat nash version 4.1.18 starting Mounted /proc filesystem Mounting sysfs Creating /dev Starting udev Creating root device Mounting root filesystem kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. Switching to new root INIT: version 2.86 booting Welcome to Fedora Core Press 'I' to enter interactive startup. modprobe: FATAL: Could not load /lib/modules/2.6.16.33-xen/modules.dep: No such file or directory Setting clock (localtime): 2006年 12月 13日 水曜日 10:59:08 JST [ OK ] Starting udev: udevd[911]: add_to_rules: invalid KERNEL operation udevd[911]: add_to_rules: invalid rule '/etc/udev/rules.d/50-udev.rules:153' [ OK ] Loading default keymap (jp106): [ OK ] Setting hostname fc6t3vm.sky.yk.fujitsu.co.jp: [ OK ] modprobe: FATAL: Could not load /lib/modules/2.6.16.33-xen/modules.dep: No such file or directory modprobe: FATAL: Could not load /lib/modules/2.6.16.33-xen/modules.dep: No such file or directory raidautorun: failed to open /dev/md0: No such device or address DM multipath kernel driver not loaded No devices found dmraid(1908): unaligned access to 0x20000000000be0f3, ip=0x2000000000018050 dmraid(1908): unaligned access to 0x20000000000be0f3, ip=0x2000000000018060 dmraid(1908): unaligned access to 0x20000000000be0fe, ip=0x2000000000018050 dmraid(1908): unaligned access to 0x20000000000be0fe, ip=0x2000000000018060 dmraid(1908): unaligned access to 0x20000000000be109, ip=0x2000000000018050 Setting up Logical Volume Management: File descriptor 3 left open No volume groups found [ OK ] Checking filesystems Checking all file systems. [/sbin/fsck.ext3 (1) -- /] fsck.ext3 -a /dev/hda1 /dev/hda1: clean, 126778/786432 files, 1220284/1572864 blocks [ OK ] Remounting root filesystem in read-write mode: [ OK ] Mounting local filesystems: [ OK ] Enabling local filesystem quotas: [ OK ] Enabling /etc/fstab swaps: [ OK ] INIT: Entering runlevel: 5 Entering non-interactive startup Starting background readahead: [ OK ] Checking for hardware changes [ OK ] Bringing up loopback interface: [ OK ] Starting system logger: [ OK ] Starting kernel logger: [ OK ] Starting irqbalance: [ OK ] Starting portmap: [ OK ] Starting NFS statd: [ OK ] Starting RPC idmapd: FATAL: Could not load /lib/modules/2.6.16.33-xen/modules.dep: No such file or directory Starting system message bus: Unknown username "named" in message bus configuration file [ OK ] Can't open RFCOMM control socket: Address family not supported by protocol Mounting other filesystems: [ OK ] Starting PC/SC smart card daemon (pcscd): [ OK ] Starting hidd: Can't open HIDP control socket: Address family not supported by protocol [FAILED] Starting autofs: Starting automount: autofs: kernel does not match daemon version autofs: kernel does not match daemon version [FAILED] [FAILED] Starting acpi daemon: [ OK ] Starting hpiod: [ OK ] Starting hpssd: [ OK ] Starting cups: [ OK ] Starting sshd: [ OK ] Starting sendmail: [ OK ] Starting sm-client: [ OK ] Starting console mouse services: [ OK ] Starting crond: [ OK ] Starting xfs: [ OK ] Starting VNC server: no displays configured [ OK ] Starting anacron: [ OK ] Starting atd: [ OK ] Starting background readahead: [ OK ] Starting yum-updatesd: [ OK ] Starting Avahi daemon: [ OK ] Starting HAL daemon: [ OK ] Fedora Core release 5.92 (FC6 Test3) Kernel 2.6.16.33-xen on an ia64 fc6t3vm.sky.yk.fujitsu.co.jp login: root Password: Last login: Wed Dec 13 10:57:07 on xvc0 [root@fc6t3vm ~]# shutdown -h now Broadcast message from root (xvc0) (Wed Dec 13 10:59:20 2006): The system is going down for system halt NOW! INIT: Switching to runlevel: 0 INIT: Sending processes the TERM signal Shutting down Avahi daemon: [ OK ] Stopping HAL daemon: [ OK ] Stopping yum-updatesd: [ OK ] Stopping anacron: [ OK ] Stopping atd: [ OK ] Stopping cups: [ OK ] Stopping hpiod: [ OK ] Stopping hpssd: [ OK ] Shutting down xfs: [ OK ] Shutting down console mouse services: [ OK ] Stopping sshd: [ OK ] Shutting down sm-client: [ OK ] Shutting down sendmail: [ OK ] Shutting down VNC server: [ OK ] Stopping acpi daemon: [ OK ] Stopping crond: [ OK ] Stopping system message bus: [ OK ] Stopping NFS statd: [ OK ] Stopping portmap: [ OK ] Stopping PC/SC smart card daemon (pcscd): [ OK ] Shutting down kernel logger: [ OK ] Shutting down system logger: [ OK ] Shutting down hidd: modprobe: FATAL: Could not load /lib/modules/2.6.16.33-xen/modules.dep: No such file or directory Can't open HIDP control socket: Address family not supported by protocol [FAILED] Stopping Bluetooth services:modprobe: FATAL: Could not load /lib/modules/2.6.16.33-xen/modules.dep: No such file or directory Can't open RFCOMM control socket: Address family not supported by protocol [FAILED] Shutting down loopback interface: [ OK ] Starting killall: [ OK ] Sending all processes the TERM signal... Sending all processes the KILL signal... Saving mixer settings Saving random seed: Syncing hardware clock to system time modprobe: FATAL: Could not load /lib/modules/2.6.16.33-xen/modules.dep: No such file or directory RTC_SET_TIME: Invalid argument ioctl() to /dev/efirtc to set the time failed. Turning off quotas: Halting system... System halted. [root@vmi02 ~]#