Hi Akio --
How did you build your (dom0) RHEL4 root disk? I see you are
booting using /dev/sda2 as root. The standard
RHEL4 build process creates an LVM disk as root and the process
you describe won't work with an LVM root disk.
Thanks,
Dan
> -----Original Message-----
> From: xen-ia64-devel-bounces@xxxxxxxxxxxxxxxxxxx
> [mailto:xen-ia64-devel-bounces@xxxxxxxxxxxxxxxxxxx] On Behalf
> Of Akio Takebe
> Sent: Friday, December 09, 2005 4:13 AM
> To: xen-ia64-devel@xxxxxxxxxxxxxxxxxxx
> Subject: [Xen-ia64-devel] [FYI] Recipe of build and boot of Xen/IA64
>
> Hi,
>
> We can boot RHEL4 domU without initrd.
> I have written the recipe.
> (Thank you for many advice, everyone :-))
>
> My enviroment is;
> Machine : Tiger4
> Dom0 OS : RHEL4 U2
> DomU OS : RHEL4 U2
> changeset: 8241:0255f48b757f
>
> ----------------------------
> Build xen
> 1. Download source
> # hg clone http://xenbits.xensource.com/ext/xen-ia64-unstable.hg
>
> 2. # make world -j4
>
> 3. make menuconfig in Dom0
> # cd linux-2.6.12-xen0
> # make menuconfig
> CONFIG_IA64_DIG=y
> # cd ..
>
> 4. make menuconfig in DomU
> # cd linux-2.6.12-xenU
> # make menuconfig
> CONFIG_IA64_DIG=y
> # CONFIG_EFI_RTC is not set
> # cd ..
>
> 5. # make kernels -j4
>
> 6. # make uninstall
>
> 7. # make install-tools
>
> 8. copy kernels and xen
> # cp xen/xen.gz /boot/efi/efi/xen/
> # cp linux-2.6.12-xen0/vmlinux.gz
> /boot/efi/efi/xen/vmlinuz-2.6.12-xen0
> # cp linux-2.6.12-xenU/vmlinux.gz /boot/vmlinux-2.6.12-xenU
>
> 9. make initrd for Dom0
> # cd linux-2.6.12-xen0/
> # make modules_install
> # mkinitrd -f /boot/efi/efi/xen/initrd-2.6.12-xen0.img
> 2.6.12.6-xen0 --builtin mptbase --builtin mptscsih
> # cd ..
>
> ---------------------------------
> Make OSimg for DomU
> 1. make file
> # dd if=/dev/zero of=/root/rhel4.img bs=1M count=4096
> # mke2fs -F -j /root/rhel4.img
> # mount -o loop /root/rhel4.img /mnt
> # cp -ax /{dev,var,etc,usr,bin,sbin,lib} /mnt
> # mkdir /mnt/{root,proc,sys,home,tmp}
>
> 2. modify DomU's fstab
> # vi /mnt/etc/fstab
> /dev/hda1 / ext3 defaults 1 1
> none /dev/pts devpts gid=5,mode=620 0 0
> none /dev/shm tmpfs defaults 0 0
> none /proc proc defaults 0 0
> none /sys sysfs defaults 0 0
>
> 3. modify inittab (runlevel and tty)
> # vi /mnt/etc/inittab
> id:3:initdefault:
> # Run gettys in standard runlevels
> 1:2345:respawn:/sbin/mingetty tty0
> #1:2345:respawn:/sbin/mingetty tty1
> #2:2345:respawn:/sbin/mingetty tty2
> #3:2345:respawn:/sbin/mingetty tty3
> #4:2345:respawn:/sbin/mingetty tty4
> #5:2345:respawn:/sbin/mingetty tty5
> #6:2345:respawn:/sbin/mingetty tty6
>
> 4. add tty0 into /etc/securetty
> # vi /mnt/etc/securetty (add tty0)
>
> 5. umount
> # umount /mnt
>
> -------------------------------------
> Boot Xen
> 1. replace elilo
> download from the below
> http://elilo.sourceforge.net/cgi-bin/blosxom
>
> 2. modify elilo.conf
> prompt
> timeout=20
> default=xen
> relocatable
>
> image=vmlinuz-2.6.12-xen0
> label=xen
> vmm=xen-.gz
> initrd=initrd-2.6.12-xen0.img
> read-only
> append="com2=115200,8n1 console=com2 sched=bvt
> tbuf_size=128 -- nomca nosmp console=tty0
> console=ttyS1,115200,8n1 rhgb root=/dev/sda2"
> image=vmlinuz-2.6.9-22.EL
> label=linux
> initrd=initrd-2.6.9-22.EL.img
> read-only
> append="rhgb root=/dev/sda2"
> 3. make config of DomU
> # vi /etc/xen/rhel4
> kernel = "/boot/vmlinux-2.6.12-xenU"
> memory = 384
> name = "rhel4"
> nics=0
> disk = [ 'file:/root/rhel4.img,hda1,w' ]
> root = "/dev/hda1 ro"
> extra = "3"
>
> 4. After boot xen and dom0, start xend
> # /etc/init.d/xend start
> ( In the debugging case, # XEND_DEBUG=1 xend trace_start )
>
> 5. start domU
> # xm create -c rhel4
>
> Best Regards,
>
> Akio Takebe
>
> _______________________________________________
> Xen-ia64-devel mailing list
> Xen-ia64-devel@xxxxxxxxxxxxxxxxxxx
> http://lists.xensource.com/xen-ia64-devel
>
_______________________________________________
Xen-ia64-devel mailing list
Xen-ia64-devel@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-ia64-devel
|
Home