Hi all,
I tried the latest unstable (cset 8234), but
booting RHEL dom0 failed.
(scsi driver init. panics due to null reference.
see attached message).
I confirmed I can successfully boot RHEL4 Dom0 with
previous cset (last Friday).
Has anyone tried RHEL4 with the latest unstable?
--
__ __ _____ ___ _ _
\ \/ /___ _ __ |___ / / _ \ __| | _____ _____| |
\ // _ \ '_ \ |_ \| | | |__ / _` |/ _ \ \ / / _ \ |
/ \ __/ | | | ___) | |_| |__| (_| | __/\ V / __/ |
/_/\_\___|_| |_| |____(_)___/ \__,_|\___| \_/ \___|_|
http://www.cl.cam.ac.uk/netos/xen
University of Cambridge Computer Laboratory
Xen version 3.0-devel (katase@) (gcc version 3.4.4 20050721 (Red Hat
3.4.4-2)) Mon Dec 5 11:46:09 JST 2005
Latest ChangeSet: Sun Dec 4 20:06:38 2005 +0100 8234:f94923f2dd14
(XEN) xen image pstart: 0x4000000, xenheap pend: 0x8000000
(XEN) efi.trim_top: ignoring 4KB of memory at 0x0 due to granule hole at
0x0
(XEN) efi.trim_top: ignoring 24KB of memory at 0x1000 due to granule hole
at
0x0
(XEN) efi.trim_top: ignoring 8KB of memory at 0x7000 due to granule hole at
0x0
(XEN) efi.trim_top: ignoring 484KB of memory at 0x9000 due to granule hole
at 0x0
(XEN) efi.trim_top: ignoring 4KB of memory at 0x84000 due to granule hole
at
0x0
(XEN) efi.trim_top: ignoring 108KB of memory at 0x85000 due to granule hole
at 0x0
(XEN) efi.trim_bottom: ignoring 15360KB of memory at 0x100000 due to
granule
hole at 0x0
(XEN) ready to move Dom0 to 0x8000000 with len ce1167...ready to move
initrd
to 0x8ce4000 with len 13e81d...Done
(XEN) find_memory: efi_memmap_walk returns max_page=1ffc3
(XEN) Before heap_start: 0xf0000000040e4960
(XEN) After heap_start: 0xf0000000040ec000
(XEN) Init boot pages: 0x1000000 -> 0x4000000.
(XEN) Init boot pages: 0x8000000 -> 0x7f708000.
(XEN) Init boot pages: 0x7fe58000 -> 0x7ff0c000.
(XEN) System RAM: 2023MB (2072304kB)
(XEN) size of frame_table: 9216kB
(XEN) alloc_dom0: starting (initializing 1024 MB...)
(XEN) alloc_dom0: dom0_start=0000000008000000
(XEN) Xen heap: 63MB (64592kB)
(XEN) ACPI: RSDP (v002 INTEL ) @
0x000000007ff60000
(XEN) ACPI: XSDT (v001 INTEL SR870BN4 0x01072002 MSFT 0x00010013) @
0x000000007ff60090
(XEN) ACPI: FADT (v003 INTEL SR870BN4 0x01072002 MSFT 0x00010013) @
0x000000007ff60138
(XEN) ACPI: MADT (v001 INTEL SR870BN4 0x01072002 MSFT 0x00010013) @
0x000000007ff60230
(XEN) ACPI: DSDT (v001 Intel SR870BN4 0x00000000 INTL 0x20030918) @
0x0000000000000000
(XEN) SAL 3.20: Intel Corp SR870BN4
version 3.0
(XEN) SAL Platform features: BusLock
(XEN) avail:0x3170074000000000,
status:0x74000000000,control:0x3170000000000000, vm?0x10000000000
(XEN) WARNING: no opcode provided from hardware(0)!!!
(XEN) vm buffer size: 1048576, order: 6
(XEN) cpu_init: current=f0000000040a4000,
current->domain->arch.mm=0000000000000000
(XEN) vm_buffer: 0xf000000004100000
(XEN) vhpt_init: vhpt size=0000000001000000, align=0000000001000000
(XEN) vhpt_init: vhpt paddr=0000000005000000, end=0000000005ffffff
(XEN) ACPI: Local APIC address 0xe8000000fee00000
(XEN) ACPI: LSAPIC (acpi_id[0x00] lsapic_id[0xc3] lsapic_eid[0x18] enabled)
(XEN) CPU 0 (0xc318) enabled
(XEN) ACPI: [APIC:0x07] ignored 15 entries of 16 found
(XEN) ACPI: IOSAPIC (id[0x0] address[00000000fec00000] gsi_base[0])
(XEN) ACPI: IOSAPIC (id[0x1] address[00000000fec10000] gsi_base[24])
(XEN) ACPI: IOSAPIC (id[0x2] address[00000000fec20000] gsi_base[48])
(XEN) ACPI: IOSAPIC (id[0x3] address[00000000fec30000] gsi_base[72])
(XEN) ACPI: [APIC:0x06] ignored 3 entries of 7 found
(XEN) ACPI: PLAT_INT_SRC (low level type[0x3] id[0x00c3] eid[0x18]
iosapic_vector[0x1e] global_irq[0x16]
(XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
(XEN) 1 CPUs available, 1 CPUs total
(XEN) machine to physical table: 0xf000000007e00000
(XEN) About to call scheduler_init()
(XEN) Using scheduler: Borrowed Virtual Time (bvt)
(XEN) About to call init_xen_time()
(XEN) CPU 0: base freq=199.457MHz, ITC ratio=7/4, ITC freq=349.050MHz
(XEN) Time init:
(XEN) .... System Time: 1559866ns
(XEN) .... scale: 2DD6ACC6D
(XEN) About to call ac_timer_init()
(XEN) About to call sort_main_extable()
(XEN) About to call do_createdomain()
(XEN) arch_vcpu_info=f000000007fd0000
(XEN) ###allocating rid_range, domain f0000000040ec100: starting_rid=40000,
ending_rid=80000
(XEN) arch_do_create_domain: domain=f0000000040ec100
(XEN) About to call construct_dom0()
(XEN) *** LOADING DOMAIN 0 ***
(XEN) METAPHYSICAL MEMORY ARRANGEMENT:
(XEN) Kernel image: 4000000->4bd0e48
(XEN) Entry address: 400ff20
(XEN) Init. ramdisk: 47ac0000 len 13e81d
(XEN) Sync i/d cache for dom0 image SUCC
(XEN) Dom0: 0xf0000000040ec100, domain: 0xf0000000040ec100
(XEN) Domain0 EFI passthrough: MPS=7ff5f000lxenable lsapic entry:
0xf00000007ff6025c
(XEN) DISABLE lsapic entry: 0xf00000007ff60268
(XEN) DISABLE lsapic entry: 0xf00000007ff60274
(XEN) lsapic entry is already disabled: 0xf00000007ff60280
(XEN) lsapic entry is already disabled: 0xf00000007ff6028c
(XEN) lsapic entry is already disabled: 0xf00000007ff60298
(XEN) lsapic entry is already disabled: 0xf00000007ff602a4
(XEN) lsapic entry is already disabled: 0xf00000007ff602b0
(XEN) lsapic entry is already disabled: 0xf00000007ff602bc
(XEN) lsapic entry is already disabled: 0xf00000007ff602c8
(XEN) lsapic entry is already disabled: 0xf00000007ff602d4
(XEN) DISABLE lsapic entry: 0xf00000007ff602e0
(XEN) DISABLE lsapic entry: 0xf00000007ff602ec
(XEN) DISABLE lsapic entry: 0xf00000007ff602f8
(XEN) DISABLE lsapic entry: 0xf00000007ff60304
(XEN) DISABLE lsapic entry: 0xf00000007ff60310
(XEN) ACPI 2.0=7ff60000lx ACPI=7ff61000lx SMBIOS=f0000lx
(XEN) domain mem: type=4, attr=0x8,
range=[0x0000000008000000-0x0000000008100000) (1MB)
(XEN) domain mem: type=13, attr=0x8,
range=[0x0000000008100000-0x0000000008200000) (1MB)
(XEN) domain mem: type=7, attr=0x8,
range=[0x0000000008200000-0x0000000048000000) (1022MB)
(XEN) domain mem: type=12, attr=0x8000000000000001,
range=[0x00000ffffc000000-0x0000100000000000) (64MB)
(XEN) initrd start 47ac0000lx initrd size 13e81dlxScrubbing Free RAM:
.....................done.
(XEN) About to call init_trace_bufs()
(XEN) Xen trace buffers: disabled
(XEN) About to call schedulers_start dom0=f0000000040ec100,
idle0_dom=f0000000040d2e10
(XEN) About to call startup_cpu_idle_loop()
(XEN) idle0A
(XEN) Linux version 2.6.12.6-xen0 (katase@tiger4) (gcc version 3.4.4
20050721 (Red Hat 3.4.4-2)) #1 SMP Mon Dec 5 10:54:42 JST 2005
EFI v1.00 by Xen/ia64: SALsystab=0x8000178 MPS=0x7ff5f000 ACPI
2.0=0x7ff60000 ACPI=0x7ff61000 SMBIOS=0xf0000
warning: unable to switch EFI into virtual mode (status=
9223372036854775811)
Initial ramdisk at: 0xe000000047ac0000 (1304605 bytes)
SAL 0.1: Xen/ia64 Xen/ia64 version 0.0
vcpu_get_lid: WARNING: Getting cr.lid always returns zero
(XEN) xen_pal_emulator: index=42
(XEN) xen_pal_emulator: UNIMPLEMENTED PAL CALL 42!!!!
(XEN) No logical to physical processor mapping available
xen_pal_emulator: index=4
(XEN) xen_pal_emulator: index=2
(XEN) xen_pal_emulator: index=8
(XEN) xen_pal_emulator: index=34
(XEN) xen_pal_emulator: index=6
(XEN) vcpu_set_itc: Setting ar.itc is currently disabled
(XEN) **** vcpu_set_itv(65536): vitm=0, setting to 0
(XEN) xen_pal_emulator: index=8
(XEN) cpu_init: PAL VM summary failed, assuming 18 RID bits
xen_pal_emulator: index=19
(XEN) iosapic_system_init: Disabling PC-AT compatible 8259 interrupts
ACPI: Local APIC address c0000000fee00000
PLATFORM int CPEI (0x3): GSI 22 (level, low) -> CPU 0 (0xc318) vector 30
register_intr: changing vector 39 from IO-SAPIC-edge to IO-SAPIC-level
vcpu_get_lid: WARNING: Getting cr.lid always returns zero
(XEN) 1 CPUs available, 16 CPUs total
*** CALLED SAL_SET_VECTORS. IGNORED...
(XEN) Built 1 zonelists
Kernel command line: nomca console=tty0 verbose console=ttyS1,115200,8n1
rhgb root=/dev/sda2 ro
PID hash table entries: 4096 (order: 12, 131072 bytes)
xen_pal_emulator: index=14
(XEN) vcpu_enable_timer(1000000): interval set to 649 cycles
(XEN) Console: colour VGA+ 80x25
Linux version 2.6.12.6-xen0 (katase@tiger4) (gcc version 3.4.4 20050721
(Red
Hat 3.4.4-2)) #1 SMP Mon Dec 5 10:54:42 JST 2005
EFI v1.00 by Xen/ia64: SALsystab=0x8000178 MPS=0x7ff5f000 ACPI
2.0=0x7ff60000 ACPI=0x7ff61000 SMBIOS=0xf0000
warning: unable to switch EFI into virtual mode (status=
9223372036854775811)
Initial ramdisk at: 0xe000000047ac0000 (1304605 bytes)
SAL 0.1: Xen/ia64 Xen/ia64 version 0.0
No logical to physical processor mapping available
cpu_init: PAL VM summary failed, assuming 18 RID bits
iosapic_system_init: Disabling PC-AT compatible 8259 interrupts
ACPI: Local APIC address c0000000fee00000
PLATFORM int CPEI (0x3): GSI 22 (level, low) -> CPU 0 (0xc318) vector 30
register_intr: changing vector 39 from IO-SAPIC-edge to IO-SAPIC-level
1 CPUs available, 16 CPUs total
Built 1 zonelists
Kernel command line: nomca console=tty0 verbose console=ttyS1,115200,8n1
rhgb root=/dev/sda2 ro
PID hash table entries: 4096 (order: 12, 131072 bytes)
Console: colour VGA+ 80x25
Running on Xen! start_info_pfn=0x1ff8 lags=0x3
xen-event-channel using irq 233
Dentry cache hash table entries: 131072 (order: 6, 1048576 bytes)
Delivering first extint to domain: isr=0000040000000000,
iip=a00000010094f150
Inode-cache hash table entries: 65536 (order: 5, 524288 bytes)
Memory: 1025920k/1047552k available (8157k code, 21056k reserved, 3537k
data, 272k init)
McKinley Errata 9 workaround not needed; disabling it
Mount-cache hash table entries: 1024
(XEN) vcpu_get_lid: WARNING: Getting cr.lid always returns zero
Boot processor id 0x0/0xc318
Brought up 1 CPUs
Total of 1 processors activated (2778.44 BogoMIPS).
checking if image is initramfs... it is
Freeing initrd memory: 1264kB freed
NET: Registered protocol family 16
ACPI: Subsystem revision 20050309
ACPI: Interpreter enabled
ACPI: Using IOSAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
Ignoring range [0-5fff] (100)
ACPI: PCI Root Bridge [PCI1] (0000:02)
ACPI: PCI Root Bridge [PCI3] (0000:09)
ACPI: PCI Root Bridge [PCI4] (0000:0f)
ACPI: Device [CSFF] status [00000008]: functional but not present; setting
present
ACPI: PCI Root Bridge [CSFF] (0000:ff)
SCSI subsystem initialized
usbcore: registered new driver hub
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a
report
perfmon: version 2.0 IRQ 238
perfmon: Generic PMU detected, 8 PMCs, 4 PMDs, 4 counters (32 bits)
PAL Information Facility v0.5
perfmon: added sampling format default_format
perfmon_default_smpl: default_format v2.0 registered
Total HugeTLB memory allocated, 0
Installing knfsd (copyright (C) 1996 okir@xxxxxxxxxxxx).
Initializing Cryptographic API
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.4
acpiphp: Slot [1] registered
acpiphp: Slot [2] registered
acpiphp: Slot [3] registered
acpiphp: Slot [4] registered
acpiphp: Slot [5] registered
acpiphp: Slot [6] registered
acpiphp: Slot [7] registered
acpiphp: Slot [8] registered
ACPI: Power Button (FF) [PWRF]
EFI Time Services Driver v0.4
Linux agpgart interface v0.101 (c) Dave Jones
[drm] Initialized drm 1.0.0 20040925
Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing enabled
acpi_serial_port: zero-length IO port range?
ttyS0 at I/O 0x3f8 (irq = 44) is a 16550A
acpi_serial_port: zero-length IO port range?
ttyS1 at I/O 0x2f8 (irq = 45) is a 16550A
Linux version 2.6.12.6-xen0 (katase@tiger4) (gcc version 3.4.4 20050721
(Red
Hat 3.4.4-2)) #1 SMP Mon Dec 5 10:54:42 JST 2005
EFI v1.00 by Xen/ia64: SALsystab=0x8000178 MPS=0x7ff5f000 ACPI
2.0=0x7ff60000 ACPI=0x7ff61000 SMBIOS=0xf0000
warning: unable to switch EFI into virtual mode (status=
9223372036854775811)
Initial ramdisk at: 0xe000000047ac0000 (1304605 bytes)
SAL 0.1: Xen/ia64 Xen/ia64 version 0.0
No logical to physical processor mapping available
cpu_init: PAL VM summary failed, assuming 18 RID bits
iosapic_system_init: Disabling PC-AT compatible 8259 interrupts
ACPI: Local APIC address c0000000fee00000
PLATFORM int CPEI (0x3): GSI 22 (level, low) -> CPU 0 (0xc318) vector 30
register_intr: changing vector 39 from IO-SAPIC-edge to IO-SAPIC-level
1 CPUs available, 16 CPUs total
Built 1 zonelists
Kernel command line: nomca console=tty0 verbose console=ttyS1,115200,8n1
rhgb root=/dev/sda2 ro
PID hash table entries: 4096 (order: 12, 131072 bytes)
Console: colour VGA+ 80x25
Running on Xen! start_info_pfn=0x1ff8 lags=0x3
xen-event-channel using irq 233
Dentry cache hash table entries: 131072 (order: 6, 1048576 bytes)
Inode-cache hash table entries: 65536 (order: 5, 524288 bytes)
Memory: 1025920k/1047552k available (8157k code, 21056k reserved, 3537k
data, 272k init)
McKinley Errata 9 workaround not needed; disabling it
Mount-cache hash table entries: 1024
Boot processor id 0x0/0xc318
Brought up 1 CPUs
Total of 1 processors activated (2778.44 BogoMIPS).
checking if image is initramfs... it is
Freeing initrd memory: 1264kB freed
NET: Registered protocol family 16
ACPI: Subsystem revision 20050309
ACPI: Interpreter enabled
ACPI: Using IOSAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
Ignoring range [0-5fff] (100)
ACPI: PCI Root Bridge [PCI1] (0000:02)
ACPI: PCI Root Bridge [PCI3] (0000:09)
ACPI: PCI Root Bridge [PCI4] (0000:0f)
ACPI: Device [CSFF] status [00000008]: functional but not present; setting
present
ACPI: PCI Root Bridge [CSFF] (0000:ff)
SCSI subsystem initialized
usbcore: registered new driver hub
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a
report
perfmon: version 2.0 IRQ 238
perfmon: Generic PMU detected, 8 PMCs, 4 PMDs, 4 counters (32 bits)
PAL Information Facility v0.5
perfmon: added sampling format default_format
perfmon_default_smpl: default_format v2.0 registered
Total HugeTLB memory allocated, 0
Installing knfsd (copyright (C) 1996 okir@xxxxxxxxxxxx).
Initializing Cryptographic API
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.4
acpiphp: Slot [1] registered
acpiphp: Slot [2] registered
acpiphp: Slot [3] registered
acpiphp: Slot [4] registered
acpiphp: Slot [5] registered
acpiphp: Slot [6] registered
acpiphp: Slot [7] registered
acpiphp: Slot [8] registered
ACPI: Power Button (FF) [PWRF]
EFI Time Services Driver v0.4
Linux agpgart interface v0.101 (c) Dave Jones
[drm] Initialized drm 1.0.0 20040925
Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing enabled
acpi_serial_port: zero-length IO port range?
ttyS0 at I/O 0x3f8 (irq = 44) is a 16550A
acpi_serial_port: zero-length IO port range?
ttyS1 at I/O 0x2f8 (irq = 45) is a 16550A
io scheduler noop registeredio scheduler noop registered
io scheduler anticipatory registeredio scheduler anticipatory registered
io scheduler deadline registeredio scheduler deadline registered
io scheduler cfq registeredio scheduler cfq registered
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
loop: loaded (max 8 devices)
Intel(R) PRO/1000 Network Driver - version 6.0.54-k2
Copyright (c) 1999-2004 Intel Corporation.
GSI 18 (level, low) -> CPU 0 (0xc318) vector 48
ACPI: PCI Interrupt 0000:01:00.0[A] -> ACPI: PCI Interrupt 0000:01:00.0[A]
-> GSI 18 (level, low) -> IRQ 48
GSI 18 (level, low) -> IRQ 48
e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
e100: Intel(R) PRO/100 Network Driver, 3.4.8-k2-NAPI
e100: Copyright(c) 1999-2005 Intel Corporation
Linux video capture interface: v1.00
grant table at e000000007ff4000
Grant table initialized
WARNING: Failed to register Xen virtual console driver as 'ttyS0'
Event-channel device installed.
Allocated mmap_vstart: 0xa000000200000000
st: Version 20050312, fixed bufsize 32768, s/g segs 256
osst :I: Tape driver with OnStream support version 0.99.3
osst :I: $Id: osst.c,v 1.73 2005/01/01 21:13:34 wriede Exp $
Fusion MPT base driver 3.01.20
Copyright (c) 1999-2004 LSI Logic Corporation
GSI 28 (level, low) -> CPU 0 (0xc318) vector 49
ACPI: PCI Interrupt 0000:06:02.0[A] -> ACPI: PCI Interrupt 0000:06:02.0[A]
-> GSI 28 (level, low) -> IRQ 49
GSI 28 (level, low) -> IRQ 49
mptbase: Initiating ioc0 bringup
ioc0: ioc0: 53C1030: 53C1030:
Capabilities={Capabilities={InitiatorInitiator}
}
Unable to handle kernel NULL pointer dereference (address 0000000000000020)
swapper[1]: Oops 8813272891392 [1]
Modules linked in:Modules linked in:
Pid: 1, CPU 0, comm: swapper
psr : 0000001008026010 ifs : 8000000000000710 ip : [<a0000001006dcf30>]
Not tainted
ip is at sba_unmap_single+0x70/0x860
unat: 0000000000000000 pfs : 800000000000038b rsc : 000000000000000b
rnat: 0000000000000000 bsps: 0000000000000000 pr : 85a96814096a5695
ldrs: 0000000000000000 ccv : 0000000000000000 fpsr: 0009804c8a70433f
csd : 0000000000000000 ssd : 0000000000000000
b0 : a0000001006dd9a0 b6 : a000000100319090 b7 : a000000100069ed0
f6 : 1003e0000000000000000 f7 : 1003e8080808080808081
f8 : 1003e0000000000000000 f9 : 1003e0000000000000000
f10 : 1003e0000000000000000 f11 : 1003e44b831eee7285baf
r1 : a000000100d50b90 r2 : 0000000000000020 r3 : a000000100ac8300
r8 : a000000100ac8300 r9 : a000000100b51c90 r10 : e000000008b61920
r11 : e000000008b48008 r12 : e00000000cbffac0 r13 : e00000000cbf8000
r14 : e000000008ac2248 r15 : 000000000000007f r16 : 0000000000ff0000
r17 : e000000047cee978 r18 : e000000008b48004 r19 : e000000047cee97a
r20 : 0000000000000001 r21 : 00000000a07f0807 r22 : 0000000000000000
r23 : 0000000000000000 r24 : 0000000000000000 r25 : 0000000000000000
r26 : 0000000000000000 r27 : 0000000000004000 r28 : e000000008210000
r29 : 0000000000000000 r30 : 0000000000000000 r31 : a000000100b01090
Call Trace:
[<a000000100018200>] show_stack+0x80/0xa0
sp=e00000000cbff670 bsp=e00000000cbf9248
[<a000000100018b10>] show_regs+0x890/0x8c0
sp=e00000000cbff840 bsp=e00000000cbf9200
[<a000000100040610>] die+0x150/0x200
sp=e00000000cbff860 bsp=e00000000cbf91b8
[<a000000100065e50>] ia64_do_page_fault+0x9d0/0xba0
sp=e00000000cbff860 bsp=e00000000cbf9150
[<a00000010006a280>] xen_leave_kernel+0x0/0x360
sp=e00000000cbff8f0 bsp=e00000000cbf9150
[<a0000001006dcf30>] sba_unmap_single+0x70/0x860
sp=e00000000cbffac0 bsp=e00000000cbf90d0
[<a0000001006dd9a0>] sba_free_coherent+0x40/0xc0
sp=e00000000cbffac0 bsp=e00000000cbf9098
[<a00000010059a920>] mpt_do_ioc_recovery+0xfe0/0x2180
sp=e00000000cbffac0 bsp=e00000000cbf8f98
[<a00000010059c370>] mptbase_probe+0x5d0/0x1160
sp=e00000000cbffe20 bsp=e00000000cbf8f28
[<a000000100304ff0>] pci_device_probe+0x150/0x480
sp=e00000000cbffe30 bsp=e00000000cbf8ee0
[<a00000010044c8b0>] driver_probe_device+0xb0/0x180
sp=e00000000cbffe30 bsp=e00000000cbf8eb0
[<a00000010044cc40>] driver_attach+0x120/0x1a0
sp=e00000000cbffe30 bsp=e00000000cbf8e80
[<a00000010044d530>] bus_add_driver+0x150/0x360
sp=e00000000cbffe30 bsp=e00000000cbf8e40
[<a00000010044e270>] driver_register+0x70/0xa0
sp=e00000000cbffe30 bsp=e00000000cbf8e20
[<a0000001003047a0>] pci_register_driver+0x100/0x160
sp=e00000000cbffe30 bsp=e00000000cbf8df0
[<a000000100965150>] fusion_init+0x270/0x2a0
sp=e00000000cbffe30 bsp=e00000000cbf8dc8
[<a000000100011200>] init+0x360/0x940
sp=e00000000cbffe30 bsp=e00000000cbf8d68
[<a00000010001a490>] kernel_thread_helper+0x30/0x60
sp=e00000000cbffe30 bsp=e00000000cbf8d40
[<a000000100010d40>] start_kernel_thread+0x20/0x40
sp=e00000000cbffe30 bsp=e00000000cbf8d40
<0>Kernel panic - not syncing: Attempted to kill init!
<0>Kernel panic - not syncing: Attempted to kill init!
_______________________________________________
Xen-ia64-devel mailing list
Xen-ia64-devel@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-ia64-devel
|
Home