| |
|
 |
|
 |
|
|
|
| |
|
|
xen-fr
Re: [Xen-fr] Réseau extérieur
Merci mais en fait je galere vraiment dur alors voila les infos que j'ai
Configuration de la machine xen :
kernel = "/boot/vmlinuz-2.6-xen"
memory = 128
name = "fedora.fc6"
vif=[ 'bridge=xenbr1' ]
dhcp = "dhcp"
disk = ['file:/img/fedora.fc6.img,sda1,w', 'file:/img/fedora.swap,sda2,w']
root = "/dev/sda1 ro"
----
IP sur la machine hote :
ifconfig ath0
ath0 Link encap:Ethernet HWaddr 00:11:F5:67:32:07
inet addr:192.168.0.2 Bcast:192.168.0.255 Mask:255.255.255.0
inet6 addr: fe80::211:f5ff:fe67:3207/64 Scope:Link
UP BROADCAST NOTRAILERS RUNNING MULTICAST MTU:1500 Metric:1
RX packets:65454 errors:0 dropped:0 overruns:0 frame:0
TX packets:64962 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:49838175 (47.5 MiB) TX bytes:8905577 (8.4 MiB)
----------
bash-3.1# ifconfig vif7.0
vif7.0 Link encap:Ethernet HWaddr FE:FF:FF:FF:FF:FF
inet6 addr: fe80::fcff:ffff:feff:ffff/64 Scope:Link
UP BROADCAST RUNNING NOARP MTU:1500 Metric:1
RX packets:26 errors:0 dropped:0 overruns:0 frame:0
TX packets:27 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:32
RX bytes:3088 (3.0 KiB) TX bytes:1742 (1.7 KiB)
bash-3.1# ifconfig xenbr1
xenbr1 Link encap:Ethernet HWaddr 00:11:F5:67:32:07
inet addr:192.168.0.2 Bcast:192.168.0.255 Mask:255.255.255.0
inet6 addr: fe80::211:f5ff:fe67:3207/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:236 errors:0 dropped:0 overruns:0 frame:0
TX packets:9 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:7168 (7.0 KiB) TX bytes:594 (594.0 b)
bash-3.1# brctl show
bridge name bridge id STP enabled interfaces
xenbr1 8000.0011f5673207 no ath0
vif7.0
bash-3.1# more /proc/sys/net/ipv4/ip_forward
1
bash-3.1# iptables -L -v
Chain INPUT (policy ACCEPT 4866 packets, 2833K bytes)
pkts bytes target prot opt in out source
destination
Chain FORWARD (policy ACCEPT 38 packets, 2796 bytes)
pkts bytes target prot opt in out source
destination
0 0 ACCEPT all -- any any anywhere
anywhere PHYSDEV match --physdev-in vif7.0
Chain OUTPUT (policy ACCEPT 5396 packets, 597K bytes)
pkts bytes target prot opt in out source
destination
et sur la machine hote :
[root@fc6_pristine ~]# ifconfig eth0
eth0 Link encap:Ethernet HWaddr 00:16:3E:50:13:4A
inet addr:192.168.0.3 Bcast:192.168.0.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:39 errors:0 dropped:0 overruns:0 frame:0
TX packets:26 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:3050 (2.9 KiB) TX bytes:3452 (3.3 KiB)
Voila je crois que j'ai fais le tour des fichiers essentiel au
fonctionnement de mon réseau
Mais rien ne marche personne ne ping personne ...
Pouvez vous m'aider??
Merci
Le 17/01/07, Rodolphe Quiedeville<rq@xxxxxxxxx> a écrit :
Le 17.01.2007 17:31, Julien Rouxel a ecrit :
> Non en fait il y a un routeur sur mon reseau
>
> Ath0 du dom0 192.168.0.2 gw 192.168.0.254
> eth0 du domU 192.168.0.3 gw 192.168.0.2
Salut,
Mets directement
eth0 du domU 192.168.0.3 gw 192.168.0.254
A++
--
Rodolphe Quiedeville - Artisan Logiciel Libre
http://rodolphe.quiedeville.org/
Travaillons Libre - http://fr.lolix.org/
_______________________________________________
Xen-fr mailing list
Xen-fr@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-fr
--
Julien Rouxel
Esprit-Libre
+33(0)6 86 33 88 34
julien@xxxxxxxxxxxxxxxxx
_______________________________________________
Xen-fr mailing list
Xen-fr@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-fr
|
|
|
| |
|
Home