bonjour a tous,
voila j'ai un probleme avec xen..
J'ai suivi a la lettre les instructions de la
documentation pour l'install, mais je n'arrive
toujours pas a demmarer de machine virtuelle..
je m'explique:
1) j'ai installer une fedora 4 et xen dessus...
2) ensuite j'ai créer une image que j'ai compresser
dd if=/dev/zero of=fedora.img bs=1k seek=2048k
count=1
3) gzip fedora.img
--> fedora.img.gz
4) mke2fs -F -j fedora.img.gz
5) mount -o loop fedora.img.gz /mnt
6)cp -ax /{root,dev,etc,var,usr,bin,sbin,boot,lib}
/mnt
7) mkdir /mnt/{proc,sys,home,tmp}
8) umount /mnt
xm create -c rawhide (rawhide qui est mon fichier dans
lequel j'ai configuer disk etc...)
et voici les message d'erreur au demarrage:
xm create -c rawhide
# xm create -c rawhide
Using config file "/etc/xen/rawhide".
Started domain rawhide
Linux version 2.6.12-1.1447_FC4xenU
(bhcompile@xxxxxxxxxxxxxxxxxxxxxxxxxx) (gcc version
4.0.1 20050727 (Red Hat 4.0.1-5)) #1 SMP Fri Aug 26
21:25:28 EDT 2005
BIOS-provided physical RAM map:
Xen: 0000000000000000 - 0000000004000000 (usable)
64MB LOWMEM available.
Using x86 segment limits to approximate NX protection
DMI not present.
IRQ lockup detection disabled
Allocating PCI resources starting at 04000000 (gap:
04000000:fc000000)
Built 1 zonelists
Kernel command line: root=/dev/sda1 ro selinux=0 3
Initializing CPU#0
PID hash table entries: 512 (order: 9, 8192 bytes)
Xen reported: 2392.028 MHz processor.
Dentry cache hash table entries: 16384 (order: 4,
65536 bytes)
Inode-cache hash table entries: 8192 (order: 3, 32768
bytes)
vmalloc area: c4800000-fbff5000, maxmem 34000000
Memory: 60572k/65536k available (1839k kernel code,
4812k reserved, 512k data, 156k init, 0k highmem)
Checking if this processor honours the WP bit even in
supervisor mode... Ok.
Security Framework v1.0.0 initialized
SELinux: Disabled at boot.
Capability LSM initialized
Mount-cache hash table entries: 512
CPU: Trace cache: 12K uops, L1 D cache: 8K
CPU: L2 cache: 512K
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... disabled
CPU0: Intel(R) Xeon(TM) CPU 2.40GHz stepping 09
Total of 1 processors activated (4757.91 BogoMIPS).
Brought up 1 CPUs
NET: Registered protocol family 16
store_evtchn = 2
XENBUS xs_read_watch: 0
xen_mem: Initialising balloon driver.
Grant table initialized
audit: initializing netlink socket (disabled)
audit(1127466546.648:1): initialized
XENBUS xs_read_watch: 0
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096
bytes)
Initializing Cryptographic API
ksign: Installing public key data
Loading keyring
- Added public key 1C1942C715575330
- User ID: Red Hat, Inc. (Kernel Module GPG key)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered
RAMDISK driver initialized: 16 RAM disks of 16384K
size 1024 blocksize
Xen virtual console successfully installed as tty1
Event-channel device installed.
xen_blk: Initialising virtual block device driver
Registering block device major 8
xen_net: Initialising virtual ethernet driver.
8\uffff7\uffffmd: md driver 0.90.1 MAX_MD_DEVS=256,
MD_SB_DISKS=27
NET: Registered protocol family 2
IP: routing cache hash table of 256 buckets, 4Kbytes
TCP established hash table entries: 4096 (order: 4,
65536 bytes)
TCP bind hash table entries: 4096 (order: 3, 49152
bytes)
TCP: Hash tables configured (established 4096 bind
4096)
Initializing IPsec netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Freeing unused kernel memory: 156k freed
modprobe: FATAL: Could not load
/lib/modules/2.6.12-1.1447_FC4xenU/modules.dep: No
such file or directory
modprobe: FATAL: Could not load
/lib/modules/2.6.12-1.1447_FC4xenU/modules.dep: No
such file or directory
INIT: version 2.85 booting
Welcome to Fedora Core
Press 'I' to enter interactive
startup.
Starting udev: [FAILED]
Initializing hardware... storage network audio done[
OK ]
Setting clock (localtime): Fri Sep 23 11:09:11 CEST
2005 [ OK ]
Setting hostname localhost.localdomain: [ OK ]
***************************************************************
***************************************************************
WARNING: Currently emulating unsupported memory
accesses in /lib/tls libraries. The emulation is very
slow. To ensure full performance you should
execute the following as root:
mv /lib/tls /lib/tls.disabled
Offending process: nash (pid=130)
***************************************************************
***************************************************************
Checking filesystems
Checking all file systems.
[/sbin/fsck.ext3 (1) -- /] fsck.ext3 -a
/dev/VolGroup00/LogVol00
fsck.ext3: No such file or directory while trying to
open /dev/VolGroup00/LogVol00
/dev/VolGroup00/LogVol00:
The superblock could not be read or does not describe
a correct ext2
filesystem. If the device is valid and it really
contains an ext2
filesystem (and not swap or ufs or something else),
then the superblock
is corrupt, and you might try running e2fsck with an
alternate superblock:
e2fsck -b 8193 <device>
[FAILED]
*** An error occurred during the file system check.
*** Dropping you to a shell; the system will reboot
*** when you leave the shell.
Give root password for maintenance
(or type Control-D to continue):
merci de votre aide car je pense que j'y suis presque
a demarrer un instance xen mais reste ces derniere
difficulté..
Merci a vous
___________________________________________________________________________
Appel audio GRATUIT partout dans le monde avec le nouveau Yahoo! Messenger
Téléchargez cette version sur http://fr.messenger.yahoo.com
_______________________________________________
Xen-fr mailing list
Xen-fr@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-fr
|
Home