On Wed, Oct 12, 2011 at 7:12 PM, Ian Campbell <Ian.Campbell@xxxxxxxxxx> wrote:
> On Wed, 2011-10-12 at 08:13 +0100, Daniel Castro wrote:
>> Hello All,
>>
>> I am in the process of conecting my front-end to my back end.
>> The process is like this:
>> 1. Set up xenstore conection
>> 2. initiate front rings
>> 3. Initiate gran table
>> 4. Take my rings mfn address and set it up as a entry (more on this)
>> 5. create a unbound port for front-back ring communication (more on this )
>> 5.1 I start by changing state to XenbusStateInitialising
>> 5.2 ring-ref entry (step 4)
>> 5.3 port entry (step 5)
>> 5.4 backend state is XenbusStateInitWait
>> 5.4 change state to XenbusStateInitialised
>> 5.5 back end state is XenbusStateClosing meaning there is an error or
>> something is missing.
>> 6. on sucess end
>>
>> More on step 4: I got my grant page table like this:
>> struct gnttab_setup_table gst;
>> grant_entries = (struct grant_entry_v1 *) memalign_high(4096, 4096);
>> //asume malloc
>> memset(grant_entries,0,4096);
>> gst.dom = DOMID_SELF; //&me
>> gst.nr_frames = 1; //a single page
>> //gst.frame_list = grant_entries; (I have no idea how to handle this
>> :P )
>> res = hypercall_grant_table_op(GNTTABOP_map_grant_ref, &gst, 1);
>> I think this works, but maybe I am wrong.
>
> I'm afraid you are.
>
> For one thing simply not initialising one of the fields in the argument
> structure is unlikely to be correct.
>
> Secondly the argument to GNTTABOP_map_grant_ref is a pointer to "struct
> gnttab_map_grant_ref" not "struct gnttab_setup_table", likewise "struct
> gnttab_setup_table" goes with GNTTABOP_setup_table. I think this should
> be pretty clear from the way the GNTTABOP_* and struct definitions are
> laid out in xen/include/public/grant_table.h and the naming convention
> what goes with what. There are also comments in that header describing
> each operation.
>
> If you are trying to setup the grant table itself then
> GNTTABOP_setup_table is what you want. GNTTABOP_map_grant_ref is used
> for mapping a grant reference which you have been given by another
> domain.
>
> drivers/xen/grant-table.c:gnttab_map should provide a rough idea how
> this needs to be done. Because this is an HVM domain you need to do a
> XENMEM_add_to_physmap of XENMAPSPACE_grant_table before you do the
> GNTTABOP_setup_table.
Fixed. Yet, how can I confirm that the grant table was correctly
mapped? The hypercall returned 0 and the status in the struct is also
0.
After the mapping I am printing this:
allocated grant_entries at 12 bytes at 0x0f7fc000, gpfn 0xf7fc
GNTTABOP_setup_table return 0 status:0
allocated shared info 2584 bytes at 0x0f7fa000, gpfn 0xf7fa
I also found that the port I get from the EVTCHNOP_alloc_unbound is 4,
but lsevtchn gets me this:
42: VCPU 0: Interdomain (Connected) - Remote Domain 5, Port 2
43: VCPU 0: Interdomain (Connected) - Remote Domain 5, Port 3
44: VCPU 0: Interdomain (Connected) - Remote Domain 5, Port 1
Port 4 is not listed, is it because it is not connected yet?
I get no errors in xl dmesg, and in dmesg I get:
vbd vbd-5-768: 2 reading /local/domain/5/device/vbd/768/ring-ref and
event-channel
I guess there are the keys I write in the front-end, so they are being read.
Thanks for the help, I feel we are getting closer to the other side...
Daniel
>
>> This is needed on step 5, so..
>> More on step 5:
>> I consider the grant table an array of type struct grant_entry_v1.
>> So I simply do grant_entry_v1[0] for my first grant entry, and so
>> forth. For this case I read on the list some time ago that entry 0 did
>> not work, so I work with entry 1, like this:
>> grant_entries[aval_grant].domid = ext_domid;
>> grant_entries[aval_grant].frame = _frame; where frame is: (u32)sring
>> >> PAGE_SHIFT //meaning mfn of my rings.
>> grant_entries[aval_grant].flags = GTF_permit_access;
>
> This looks approximately correct _if_ you were actually writing to some
> memory which was your grant table but due to the above I think you are
> not.
>
>> These last two steps I described may be wrong... I know this because
>> the backend state is not XenbusStateConnected.
>
> That fact alone can't tell you much other than _something_ went wrong.
>
> Since the backend will have transitioned to XenbusStateClosing by
> calling xenbus_dev_fatal() it will have written some error information
> to xenstore and the dom0 console which should hint at what actually went
> wrong. I expect you will see the message "mapping ring-ref %lu port %u"
> because xen_blkif_map will have failed during map_frontend_page().
>
>> I think my mistake is on step 5, so can someone please shed some light
>> on this small issue.
>>
>> And thank you very much for taking the time to read.
>>
>> Daniel
>>
>
>
>
--
+-=====---------------------------+
| +---------------------------------+ | This space intentionally blank
for notetaking.
| | | Daniel Castro, |
| | | Consultant/Programmer.|
| | | U Andes |
+-------------------------------------+
_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-devel
|
Home