23728:548b2826293e changed another pair of autogenerated files,
libxlu_cfg_l.[ch], too. Undo that change.
Signed-off-by: Ian Jackson <ian.jackson@xxxxxxxxxxxxx>
diff -r 159be83e5fe9 tools/libxl/libxlu_cfg_l.c
--- a/tools/libxl/libxlu_cfg_l.c Thu Oct 06 19:44:40 2011 +0100
+++ b/tools/libxl/libxlu_cfg_l.c Thu Oct 06 19:45:07 2011 +0100
@@ -34,7 +34,7 @@
#if defined (__STDC_VERSION__) && __STDC_VERSION__ >= 199901L
/* C99 says to define __STDC_LIMIT_MACROS before including stdint.h,
- * if you want the limit (max/min) macros for int types.
+ * if you want the limit (max/min) macros for int types.
*/
#ifndef __STDC_LIMIT_MACROS
#define __STDC_LIMIT_MACROS 1
@@ -51,7 +51,7 @@ typedef uint32_t flex_uint32_t;
typedef signed char flex_int8_t;
typedef short int flex_int16_t;
typedef int flex_int32_t;
-typedef unsigned char flex_uint8_t;
+typedef unsigned char flex_uint8_t;
typedef unsigned short int flex_uint16_t;
typedef unsigned int flex_uint32_t;
@@ -185,7 +185,7 @@ typedef struct yy_buffer_state *YY_BUFFE
/* Note: We specifically omit the test for yy_rule_can_match_eol because
it requires
* access to the local variable yy_act. Since yyless() is a macro,
it would break
- * existing scanners that call yyless() from OUTSIDE xlu__cfg_yylex.
+ * existing scanners that call yyless() from OUTSIDE xlu__cfg_yylex.
* One obvious solution it to make yy_act a global. I tried that,
and saw
* a 5% performance hit in a non-yylineno scanner, because yy_act is
* normally declared as a register variable-- so it is not worth it.
@@ -197,7 +197,7 @@ typedef struct yy_buffer_state *YY_BUFFE
if ( yytext[yyl] == '\n' )\
--yylineno;\
}while(0)
-
+
/* Return all but the first "n" matched characters back to the input stream. */
#define yyless(n) \
do \
@@ -259,7 +259,7 @@ struct yy_buffer_state
int yy_bs_lineno; /**< The line count. */
int yy_bs_column; /**< The column count. */
-
+
/* Whether to try to fill the input buffer when we reach the
* end of it.
*/
@@ -574,9 +574,9 @@ static int yy_init_globals (yyscan_t yys
/* This must go here because YYSTYPE and YYLTYPE are included
* from bison output in section 1.*/
# define yylval yyg->yylval_r
-
+
# define yylloc yyg->yylloc_r
-
+
int xlu__cfg_yylex_init (yyscan_t* scanner);
int xlu__cfg_yylex_init_extra (YY_EXTRA_TYPE user_defined,yyscan_t* scanner);
@@ -615,9 +615,9 @@ YYSTYPE * xlu__cfg_yyget_lval (yyscan_t
void xlu__cfg_yyset_lval (YYSTYPE * yylval_param ,yyscan_t yyscanner );
YYLTYPE *xlu__cfg_yyget_lloc (yyscan_t yyscanner );
-
+
void xlu__cfg_yyset_lloc (YYLTYPE * yylloc_param ,yyscan_t yyscanner );
-
+
/* Macros after this point can all be overridden by user definitions in
* section 1.
*/
@@ -845,7 +845,7 @@ yy_find_action:
int yyl;
for ( yyl = yyg->yy_more_len; yyl < yyleng; ++yyl )
if ( yytext[yyl] == '\n' )
-
+
do{ yylineno++;
yycolumn=0;
}while(0)
@@ -1377,7 +1377,7 @@ static int yy_get_next_buffer (yyscan_t
yyg->yy_hold_char = *++yyg->yy_c_buf_p;
if ( c == '\n' )
-
+
do{ yylineno++;
yycolumn=0;
}while(0)
@@ -1460,7 +1460,7 @@ static void xlu__cfg_yy_load_buffer_stat
YY_BUFFER_STATE xlu__cfg_yy_create_buffer (FILE * file, int size ,
yyscan_t yyscanner)
{
YY_BUFFER_STATE b;
-
+
b = (YY_BUFFER_STATE) xlu__cfg_yyalloc(sizeof( struct yy_buffer_state )
,yyscanner );
if ( ! b )
YY_FATAL_ERROR( "out of dynamic memory in
xlu__cfg_yy_create_buffer()" );
@@ -1504,7 +1504,7 @@ static void xlu__cfg_yy_load_buffer_stat
#ifndef __cplusplus
extern int isatty (int );
#endif /* __cplusplus */
-
+
/* Initializes or reinitializes a buffer.
* This function is sometimes called more than once on the same buffer,
* such as during a xlu__cfg_yyrestart() or at EOF.
@@ -1530,7 +1530,7 @@ extern int isatty (int );
}
b->yy_is_interactive = file ? (isatty( fileno(file) ) > 0) : 0;
-
+
errno = oerrno;
}
@@ -1636,9 +1636,9 @@ static void xlu__cfg_yyensure_buffer_sta
, yyscanner);
if ( ! yyg->yy_buffer_stack )
YY_FATAL_ERROR( "out of dynamic memory in
xlu__cfg_yyensure_buffer_stack()" );
-
+
memset(yyg->yy_buffer_stack, 0, num_to_alloc * sizeof(struct
yy_buffer_state*));
-
+
yyg->yy_buffer_stack_max = num_to_alloc;
yyg->yy_buffer_stack_top = 0;
return;
@@ -1667,12 +1667,12 @@ static void xlu__cfg_yyensure_buffer_sta
* @param base the character buffer
* @param size the size in bytes of the character buffer
* @param yyscanner The scanner object.
- * @return the newly allocated buffer state object.
+ * @return the newly allocated buffer state object.
*/
YY_BUFFER_STATE xlu__cfg_yy_scan_buffer (char * base, yy_size_t size ,
yyscan_t yyscanner)
{
YY_BUFFER_STATE b;
-
+
if ( size < 2 ||
base[size-2] != YY_END_OF_BUFFER_CHAR ||
base[size-1] != YY_END_OF_BUFFER_CHAR )
@@ -1708,7 +1708,7 @@ YY_BUFFER_STATE xlu__cfg_yy_scan_buffer
*/
YY_BUFFER_STATE xlu__cfg_yy_scan_string (yyconst char * yystr , yyscan_t
yyscanner)
{
-
+
return xlu__cfg_yy_scan_bytes(yystr,strlen(yystr) ,yyscanner);
}
@@ -1725,7 +1725,7 @@ YY_BUFFER_STATE xlu__cfg_yy_scan_bytes
char *buf;
yy_size_t n;
int i;
-
+
/* Get memory for full buffer, including space for trailing EOB's. */
n = _yybytes_len + 2;
buf = (char *) xlu__cfg_yyalloc(n ,yyscanner );
@@ -1793,10 +1793,10 @@ YY_EXTRA_TYPE xlu__cfg_yyget_extra (yys
int xlu__cfg_yyget_lineno (yyscan_t yyscanner)
{
struct yyguts_t * yyg = (struct yyguts_t*)yyscanner;
-
+
if (! YY_CURRENT_BUFFER)
return 0;
-
+
return yylineno;
}
@@ -1806,10 +1806,10 @@ int xlu__cfg_yyget_lineno (yyscan_t yys
int xlu__cfg_yyget_column (yyscan_t yyscanner)
{
struct yyguts_t * yyg = (struct yyguts_t*)yyscanner;
-
+
if (! YY_CURRENT_BUFFER)
return 0;
-
+
return yycolumn;
}
@@ -1870,8 +1870,8 @@ void xlu__cfg_yyset_lineno (int line_nu
/* lineno is only valid if an input buffer exists. */
if (! YY_CURRENT_BUFFER )
- yy_fatal_error( "xlu__cfg_yyset_lineno called with no buffer" ,
yyscanner);
-
+ yy_fatal_error( "xlu__cfg_yyset_lineno called with no buffer" ,
yyscanner);
+
yylineno = line_number;
}
@@ -1885,8 +1885,8 @@ void xlu__cfg_yyset_column (int column_
/* column is only valid if an input buffer exists. */
if (! YY_CURRENT_BUFFER )
- yy_fatal_error( "xlu__cfg_yyset_column called with no buffer" ,
yyscanner);
-
+ yy_fatal_error( "xlu__cfg_yyset_column called with no buffer" ,
yyscanner);
+
yycolumn = column_no;
}
@@ -1939,13 +1939,13 @@ YYLTYPE *xlu__cfg_yyget_lloc (yyscan_t
struct yyguts_t * yyg = (struct yyguts_t*)yyscanner;
return yylloc;
}
-
+
void xlu__cfg_yyset_lloc (YYLTYPE * yylloc_param , yyscan_t yyscanner)
{
struct yyguts_t * yyg = (struct yyguts_t*)yyscanner;
yylloc = yylloc_param;
}
-
+
/* User-visible API */
/* xlu__cfg_yylex_init is special because it creates the scanner itself, so it
is
@@ -1993,20 +1993,20 @@ int xlu__cfg_yylex_init_extra(YY_EXTRA_T
errno = EINVAL;
return 1;
}
-
+
*ptr_yy_globals = (yyscan_t) xlu__cfg_yyalloc ( sizeof( struct yyguts_t ),
&dummy_yyguts );
-
+
if (*ptr_yy_globals == NULL){
errno = ENOMEM;
return 1;
}
-
+
/* By setting to 0xAA, we expose bugs in
yy_init_globals. Leave at 0x00 for releases. */
memset(*ptr_yy_globals,0x00,sizeof(struct yyguts_t));
-
+
xlu__cfg_yyset_extra (yy_user_defined, *ptr_yy_globals);
-
+
return yy_init_globals ( *ptr_yy_globals );
}
diff -r 159be83e5fe9 tools/libxl/libxlu_cfg_l.h
--- a/tools/libxl/libxlu_cfg_l.h Thu Oct 06 19:44:40 2011 +0100
+++ b/tools/libxl/libxlu_cfg_l.h Thu Oct 06 19:45:07 2011 +0100
@@ -38,7 +38,7 @@
#if defined (__STDC_VERSION__) && __STDC_VERSION__ >= 199901L
/* C99 says to define __STDC_LIMIT_MACROS before including stdint.h,
- * if you want the limit (max/min) macros for int types.
+ * if you want the limit (max/min) macros for int types.
*/
#ifndef __STDC_LIMIT_MACROS
#define __STDC_LIMIT_MACROS 1
@@ -55,7 +55,7 @@ typedef uint32_t flex_uint32_t;
typedef signed char flex_int8_t;
typedef short int flex_int16_t;
typedef int flex_int32_t;
-typedef unsigned char flex_uint8_t;
+typedef unsigned char flex_uint8_t;
typedef unsigned short int flex_uint16_t;
typedef unsigned int flex_uint32_t;
@@ -193,7 +193,7 @@ struct yy_buffer_state
int yy_bs_lineno; /**< The line count. */
int yy_bs_column; /**< The column count. */
-
+
/* Whether to try to fill the input buffer when we reach the
* end of it.
*/
@@ -281,9 +281,9 @@ YYSTYPE * xlu__cfg_yyget_lval (yyscan_t
void xlu__cfg_yyset_lval (YYSTYPE * yylval_param ,yyscan_t yyscanner );
YYLTYPE *xlu__cfg_yyget_lloc (yyscan_t yyscanner );
-
+
void xlu__cfg_yyset_lloc (YYLTYPE * yylloc_param ,yyscan_t yyscanner );
-
+
/* Macros after this point can all be overridden by user definitions in
* section 1.
*/
_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-devel
|
Home