(early) [ 0.000000] Initializing cgroup subsys cpuset (early) [ 0.000000] Initializing cgroup subsys cpu (early) [ 0.000000] Linux version 3.0.3-7.pvops.qubes.x86_64 (marmarek@xxxxxxxxxxxx) (gcc version 4.4.5 20101112 (Red Hat 4.4.5-2) (GCC) ) #8 SMP Fri Aug 19 15:53:32 CEST 2011 (early) [ 0.000000] Command line: root=/dev/mapper/dmroot ro nomodeset console=hvc0 rd_NO_PLYMOUTH 3 iommu=soft pci=nomsi debug loglevel=8 earlyprintk=xen (early) [ 0.000000] ACPI in unprivileged domain disabled (early) [ 0.000000] released 0 pages of unused memory (early) [ 0.000000] Set 0 page(s) to 1-1 mapping. (early) [ 0.000000] BIOS-provided physical RAM map: (early) [ 0.000000] Xen: 0000000000000000 - 00000000000a0000 (usable) (early) [ 0.000000] Xen: 00000000000a0000 - 0000000000100000 (reserved) (early) [ 0.000000] Xen: 0000000000100000 - 0000000019800000 (usable) (early) [ 0.000000] bootconsole [xenboot0] enabled (early) [ 0.000000] NX (Execute Disable) protection: active (early) [ 0.000000] DMI not present or invalid. (early) [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (early) (usable)(early) ==> (early) (reserved)(early) (early) [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (early) (usable)(early) (early) [ 0.000000] No AGP bridge found (early) [ 0.000000] last_pfn = 0x19800 max_arch_pfn = 0x400000000 (early) [ 0.000000] initial memory mapped : 0 - 02e51000 (early) [ 0.000000] Base memory trampoline at [ffff88000009b000] 9b000 size 20480 (early) [ 0.000000] init_memory_mapping: 0000000000000000-0000000019800000 (early) [ 0.000000] 0000000000 - 0019800000 page 4k (early) [ 0.000000] kernel direct mapping tables up to 19800000 @ 18f32000-19000000 (early) [ 0.000000] xen: setting RW the range 18fe2000 - 19000000 (early) [ 0.000000] RAMDISK: 01b12000 - 02e51000 (early) [ 0.000000] Zone PFN ranges: (early) [ 0.000000] DMA (early) 0x00000010 -> 0x00001000 (early) [ 0.000000] DMA32 (early) 0x00001000 -> 0x00100000 (early) [ 0.000000] Normal (early) empty (early) [ 0.000000] Movable zone start PFN for each node (early) [ 0.000000] early_node_map[2] active PFN ranges (early) [ 0.000000] 0: 0x00000010 -> 0x000000a0 (early) [ 0.000000] 0: 0x00000100 -> 0x00019800 (early) [ 0.000000] On node 0 totalpages: 104336 (early) [ 0.000000] DMA zone: 56 pages used for memmap (early) [ 0.000000] DMA zone: 5 pages reserved (early) [ 0.000000] DMA zone: 3923 pages, LIFO batch:0 (early) [ 0.000000] DMA32 zone: 1372 pages used for memmap (early) [ 0.000000] DMA32 zone: 98980 pages, LIFO batch:31 (early) [ 0.000000] SFI: Simple Firmware Interface v0.81 http://simplefirmware.org (early) [ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs (early) [ 0.000000] No local APIC present (early) [ 0.000000] APIC: disable apic facility (early) [ 0.000000] APIC: switched to apic NOOP (early) [ 0.000000] nr_irqs_gsi: 16 (early) [ 0.000000] Allocating PCI resources starting at 19800000 (gap: 19800000:e6800000) (early) [ 0.000000] Booting paravirtualized kernel on Xen (early) [ 0.000000] Xen version: 4.2-unstable (preserve-AD) (early) [ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:1 nr_node_ids:1 (early) [ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff880018ee7000 s78144 r8192 d24256 u110592 (early) [ 0.000000] pcpu-alloc: s78144 r8192 d24256 u110592 alloc=27*4096(early) (early) [ 0.000000] pcpu-alloc: (early) [0] (early) 0 (early) (early) [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 102903 (early) [ 0.000000] Kernel command line: root=/dev/mapper/dmroot ro nomodeset console=hvc0 rd_NO_PLYMOUTH 3 iommu=soft pci=nomsi debug loglevel=8 earlyprintk=xen (early) [ 0.000000] PID hash table entries: 2048 (order: 2, 16384 bytes) (early) [ 0.000000] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes) (early) [ 0.000000] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes) (early) [ 0.000000] xsave/xrstor: enabled xstate_bv 0x3, cntxt size 0x240 (early) [ 0.000000] Placing 64MB software IO TLB between ffff880013e00000 - ffff880017e00000 (early) [ 0.000000] software IO TLB at phys 0x13e00000 - 0x17e00000 (early) [ 0.000000] Memory: 303380k/417792k available (4212k kernel code, 448k absent, 113964k reserved, 4362k data, 536k init) (early) [ 0.000000] Hierarchical RCU implementation. (early) [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. (early) [ 0.000000] NR_IRQS:33024 nr_irqs:256 16 (early) [ 0.000000] Console: colour dummy device 80x25 (early) [ 0.000000] console [tty0] enabled [ 0.000000] console [hvc0] enabled, bootconsole disabled (early) [ 0.000000] console [hvc0] enabled, bootconsole disabled [ 0.000000] allocated 4194304 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Xen: using vcpuop timer interface [ 0.000000] installing Xen timer for CPU 0 [ 0.000000] Detected 2394.088 MHz processor. [ 0.004000] Calibrating delay loop (skipped), value calculated using timer frequency.. 4788.17 BogoMIPS (lpj=9576352) [ 0.004000] pid_max: default: 32768 minimum: 301 [ 0.004000] Mount-cache hash table entries: 256 [ 0.004000] Initializing cgroup subsys cpuacct [ 0.004000] Initializing cgroup subsys memory [ 0.004000] Initializing cgroup subsys devices [ 0.004000] Initializing cgroup subsys freezer [ 0.004000] Initializing cgroup subsys net_cls [ 0.004000] Initializing cgroup subsys blkio [ 0.004000] CPU: Physical Processor ID: 0 [ 0.004000] CPU: Processor Core ID: 0 [ 0.004000] SMP alternatives: switching to UP code [ 0.008168] Freeing SMP alternatives: 20k freed [ 0.008272] Performance Events: unsupported p6 CPU model 23 no PMU driver, software events only. [ 0.008466] Brought up 1 CPUs [ 0.008600] devtmpfs: initialized [ 0.016074] Grant table initialized [ 0.016148] print_constraints: dummy: [ 0.048031] Time: 165:165:165 Date: 165/165/65 [ 0.048133] NET: Registered protocol family 16 [ 0.049539] PCI: setting up Xen PCI frontend stub [ 0.049547] PCI: pci_cache_line_size set to 64 bytes [ 0.050213] bio: create slab at 0 [ 0.050318] ACPI: Interpreter disabled. [ 0.050939] xen/balloon: Initialising balloon driver. [ 0.050948] last_pfn = 0x19800 max_arch_pfn = 0x400000000 [ 0.053640] xen-balloon: Initialising balloon driver. [ 0.053998] vgaarb: loaded [ 0.055609] PCI: System does not support PCI [ 0.055617] PCI: System does not support PCI [ 0.055718] Switching to clocksource xen [ 0.055734] Switched to NOHz mode on CPU #0 [ 0.055734] pnp: PnP ACPI: disabled [ 0.055734] PCI: max bus depth: 0 pci_try_num: 1 [ 0.090032] NET: Registered protocol family 2 [ 0.090224] IP route cache hash table entries: 4096 (order: 3, 32768 bytes) [ 0.090562] TCP established hash table entries: 16384 (order: 6, 262144 bytes) [ 0.090835] TCP bind hash table entries: 16384 (order: 6, 262144 bytes) [ 0.091073] TCP: Hash tables configured (established 16384 bind 16384) [ 0.091235] TCP reno registered [ 0.091274] UDP hash table entries: 256 (order: 1, 8192 bytes) [ 0.091284] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes) [ 0.091363] NET: Registered protocol family 1 [ 0.091376] PCI: CLS 0 bytes, default 64 [ 0.091419] Unpacking initramfs... [ 0.124938] Freeing initrd memory: 19708k freed [ 0.133587] platform rtc_cmos: registered platform RTC device (no PNP device found) [ 0.133893] audit: initializing netlink socket (disabled) [ 0.133912] type=2000 audit(1314717454.783:1): initialized [ 0.155478] VFS: Disk quotas dquot_6.5.2 [ 0.155518] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.155657] msgmni has been set to 631 [ 0.155811] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.155821] io scheduler noop registered [ 0.155827] io scheduler deadline registered [ 0.155845] io scheduler cfq registered (default) [ 0.163533] pcifront pci-0: Installing PCI frontend [ 0.163895] pcifront pci-0: Creating PCI Frontend Bus 0000:00 [ 0.164114] pci 0000:00:00.0: [8086:4232] type 0 class 0x000280 [ 0.164114] pci 0000:00:00.0: reg 10: [mem 0xf6000000-0xf6001fff 64bit] [ 0.168836] pci 0000:00:01.0: [11ab:4363] type 0 class 0x000200 [ 0.169404] pci 0000:00:01.0: reg 10: [mem 0xfa000000-0xfa003fff 64bit] [ 0.169729] pci 0000:00:01.0: reg 18: [io 0x5000-0x50ff] [ 0.171918] pci 0000:00:01.0: supports D1 D2 [ 0.172363] pcifront pci-0: claiming resource 0000:00:00.0/0 [ 0.172363] pcifront pci-0: claiming resource 0000:00:01.0/0 [ 0.172363] pcifront pci-0: claiming resource 0000:00:01.0/2 [ 0.176920] Non-volatile memory driver v1.3 [ 0.177493] loop: module loaded [ 0.177535] Fixed MDIO Bus: probed [ 0.177571] i8042: PNP: No PS/2 controller found. Probing ports directly. [ 0.178405] i8042: No controller found [ 0.178464] mousedev: PS/2 mouse device common for all mice [ 0.218323] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0 [ 0.290679] rtc_cmos: probe of rtc_cmos failed with error -38 [ 0.290909] device-mapper: uevent: version 1.0.3 [ 0.291087] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: dm-devel@xxxxxxxxxx [ 0.291316] cpuidle: using governor ladder [ 0.291415] cpuidle: using governor menu [ 0.291657] TCP cubic registered [ 0.291803] NET: Registered protocol family 10 [ 0.292329] Registering the dns_resolver key type [ 0.292437] registered taskstats version 1 [ 0.392165] XENBUS: Device with no driver: device/vbd/51712 [ 0.392189] XENBUS: Device with no driver: device/vbd/51728 [ 0.392207] XENBUS: Device with no driver: device/vbd/51744 [ 0.392224] XENBUS: Device with no driver: device/vbd/51760 [ 0.392281] Magic number: 1:252:3141 [ 0.392339] /home/marmarek/qubes-src/kernel/kernel-3.0.3/linux-3.0.3/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 0.393246] Freeing unused kernel memory: 536k freed [ 0.393650] Write protecting the kernel read-only data: 8192k [ 0.407272] Freeing unused kernel memory: 1912k freed [ 0.407965] Freeing unused kernel memory: 192k freed [ 0.433254] dracut: dracut-005-3.fc13 Qubes initramfs script here: [ 0.472994] blkfront: xvda: barrier or flush: disabled [ 0.474009] xvda: unknown partition table [ 0.475219] Setting capacity to 20971520 [ 0.475228] xvda: detected capacity change from 0 to 10737418240 [ 0.476688] blkfront: xvdb: barrier or flush: disabled [ 0.478263] xvdb: unknown partition table [ 0.479103] blkfront: xvdc: barrier or flush: disabled [ 0.479840] xvdc: xvdc1 xvdc2 [ 0.480270] Setting capacity to 4194304 [ 0.480279] xvdb: detected capacity change from 0 to 2147483648 [ 0.480769] blkfront: xvdd: barrier or flush: disabled [ 0.481508] xvdd: unknown partition table [ 0.481690] Setting capacity to 23068672 [ 0.481699] xvdc: detected capacity change from 0 to 11811160064 [ 0.481898] Setting capacity to 409600 [ 0.481907] xvdd: detected capacity change from 0 to 209715200 Waiting for /dev/xvda* devices... Qubes: Doing COW setup for AppVM... Qubes: done. [ 0.598487] dracut: rd_NO_MDIMSM: no MD RAID for imsm/isw raids [ 0.601509] udev: starting version 153 [ 0.601586] udevd (65): /proc/65/oom_adj is deprecated, please use /proc/65/oom_score_adj instead. [ 4.015951] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null) [ 4.022188] dracut: Remounting /dev/mapper/dmroot with -o noatime,ro [ 4.025996] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null) [ 4.029222] dracut: Mounted root filesystem /dev/mapper/dmroot Waiting for /dev/xvdd device... [ 4.047905] EXT3-fs: barriers not enabled [ 4.048075] kjournald starting. Commit interval 5 seconds [ 4.048096] EXT3-fs (xvdd): mounted filesystem with ordered data mode [ 4.051874] dracut: Loading SELinux policy [ 4.064588] dracut: /sbin/load_policy: Can't load policy: No such device [ 4.102478] dracut: Switching root [ 4.182489] usbcore: registered new interface driver usbfs [ 4.182526] usbcore: registered new interface driver hub [ 4.186984] usbcore: registered new device driver usb Welcome to Fedora[ 4.221680] readahead-collector: starting Starting udev: [ 4.300977] udev[212]: starting version 161 [ 4.374515] input: PC Speaker as /devices/platform/pcspkr/input/input0 [ 4.380216] sky2: driver version 1.28 [ 4.406733] sky2 0000:00:01.0: BAR 0: set to [mem 0xfa000000-0xfa003fff 64bit] (PCI address [0xfa000000-0xfa003fff]) [ 4.406894] sky2 0000:00:01.0: BAR 2: set to [io 0x5000-0x50ff] (PCI address [0x5000-0x50ff]) [ 4.406986] sky2 0000:00:01.0: enabling device (0000 -> 0003) [ 4.407264] sky2 0000:00:01.0: Xen PCI mapped GSI19 to IRQ28 [ 4.407649] sky2 0000:00:01.0: setting latency timer to 64 [ 4.407836] sky2 0000:00:01.0: Yukon-2 EC Ultra chip revision 3 [ 4.409591] sky2 0000:00:01.0: eth0: addr 00:13:77:b7:eb:48 [ 4.415575] cfg80211: Calling CRDA to update world regulatory domain [ 4.691277] iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree:d [ 4.691293] iwlagn: Copyright(c) 2003-2011 Intel Corporation [ 4.691505] iwlagn 0000:00:00.0: enabling device (0000 -> 0002) [ 4.691772] iwlagn 0000:00:00.0: Xen PCI mapped GSI16 to IRQ29 [ 4.692033] iwlagn 0000:00:00.0: setting latency timer to 64 [ 4.692229] iwlagn 0000:00:00.0: Detected Intel(R) WiFi Link 5100 AGN, REV=0x54 [ 4.715250] iwlagn 0000:00:00.0: device EEPROM VER=0x11f, CALIB=0x4 [ 4.715259] iwlagn 0000:00:00.0: Device SKU: 0Xb [ 4.715276] iwlagn 0000:00:00.0: Tunable channels: 13 802.11bg, 24 802.11a channels [ 4.830598] iwlagn 0000:00:00.0: loaded firmware version 8.83.5.1 build 33692 [ 4.831008] Registered led device: phy0-led [ 4.879952] cfg80211: World regulatory domain updated: [ 4.879965] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 4.879974] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 4.879982] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 4.879990] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 4.879999] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 4.880007] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 4.886836] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs' [ OK ] FATAL: Module evtchn not found. [ 7.640334] Event-channel device installed. Setting hostname localhost: [ OK ] Setting up Logical Volume Management: No volume groups found [ OK ] Checking filesystems Checking all file systems. [/sbin/fsck.ext4 (1) -- /] fsck.ext4 -a /dev/mapper/dmroot /dev/mapper/dmroot: clean, 103932/655360 files, 876769/2621440 blocks [ OK ] Remounting root filesystem in read-write mode: [ 7.772148] EXT4-fs (dm-0): re-mounted. Opts: (null) [ OK ] Mounting local filesystems: [ OK ] Enabling local filesystem quotas: [ OK ] Enabling /etc/fstab swaps: [ 7.933566] Adding 1048572k swap on /dev/xvdc1. Priority:-1 extents:1 across:1048572k SS [ OK ] Entering non-interactive startup iptables: Applying firewall rules: [ 8.101181] ip_tables: (C) 2000-2006 Netfilter Core Team [ 8.107339] nf_conntrack version 0.5.0 (2544 buckets, 10176 max) [ OK ] Starting system logger: [ OK ] Starting system message bus: [ OK ] Starting HAL daemon: [ OK ] Executing Qubes Core scripts:[ 8.637227] EXT4-fs (xvdb): warning: maximal mount count reached, running e2fsck is recommended [ 8.637448] EXT4-fs (xvdb): mounted filesystem with ordered data mode. Opts: (null) [ OK ] [ 8.648119] u2mfn_mmap: entering, private= (null) [ 8.648137] u2mfn_mmap: calling remap return 0 [ 8.648151] u2mfn_release, priv= (null) Setting network parameters... [ OK ] Starting NetworkManager daemon: [ OK ] Executing Qubes Core scripts NetVM:FATAL: Module netbk not found. [ OK ] Starting Qubes GUI agent:[ OK ] [ 9.284194] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 9.292081] sky2 0000:00:01.0: eth0: enabling interface [ 9.335314] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 9.590063] u2mfn_mmap: entering, private= (null) [ 9.590082] u2mfn_mmap: calling remap return 0 [ 9.590097] u2mfn_release, priv= (null) [ 9.604704] NET: Registered protocol family 17 [ 9.976749] ADDRCONF(NETDEV_UP): vif613.0: link is not ready Fedora release 14 (Laughlin) Kernel 3.0.3-7.pvops.qubes.x86_64 on an x86_64 (/dev/hvc0) netvm login: [ 11.632013] sky2 0000:00:01.0: eth0: Link is up at 1000 Mbps, full duplex, flow control both [ 11.632164] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 14.175013] ADDRCONF(NETDEV_CHANGE): vif613.0: link becomes ready [ 20.020210] type=1305 audit(1314717474.667:5807): auid=4294967295 ses=4294967295 op="remove rule" key=(null) list=4 res=1 [ 20.020265] type=1305 audit(1314717474.667:5808): audit_enabled=0 old=1 auid=4294967295 ses=4294967295 res=1 [ 20.189498] readahead-collector: sorting [ 20.212208] readahead-collector: finished