On Mon, 2011-06-06 at 14:28 +0100, veerasena reddy wrote:
> Hi,
>
> In one of experiments, I need to map a page allocated in dom0 to
> hypervisor and access/modify the page contents in hypervisor.
> I tried this by adding a new hypercall, and pass the GPA of the page
> to its handler in hypervisor which does the following:
>
> ==================== Hypercall handler ================
> DO(my_rd_wr)(int cmd, XEN_GUEST_HANDLE(void) arg)
> {
> unsigned long dom0_gpa;
> unsigned long gmfn;
> unsigned long mfn;
> void *my_rd_wr_page;
> struct domain *d = current->domain;
>
> printk(XENLOG_G_DEBUG "%s:L%u: Entered\n", __FUNCTION__, __LINE__);
> switch( cmd )
> {
> case 0x1:
> if ( copy_from_guest(&dom0_gpa, arg, 1) )
> return -EFAULT;
> printk(XENLOG_G_DEBUG "%s:L%u: GPA read 0x%lx\n",
> __FUNCTION__, __LINE__,
> dom0_gpa);
>
> gmfn = dom0_gpa >> 12;
> mfn = gmfn_to_mfn(d, gmfn);
> if ( !mfn_valid(mfn) ||
> !get_page_and_type(mfn_to_page(mfn), d,
> PGT_writable_page) )
> {
> printk(XENLOG_G_WARNING
> "Bad GMFN %lx (MFN %lx)\n", gmfn,
> mfn);
> return 0;
> }
>
> my_rd_wr_page = map_domain_page(mfn);
>
> /* Do your initialization of the page here; just
> write '2' in all bytes */
> memset(my_rd_wr_page, 2, 1<<12);
>
> unmap_domain_page(my_rd_wr_page);
> put_page_and_type(mfn_to_page(mfn));
> break;
>
> default:
> printk(XENLOG_G_DEBUG "%s:L%u: unhandled\n",
> __FUNCTION__, __LINE__);
> break;
> }
>
> return 0;
> }
> ============================
>
> I have allocated a page from a sample dom0 kernel module (using vmalloc()),
> and passed the physical address of it to hypercall.
>
> void my_rd_wr_page_setup(void)
> {
> unsigned long my_gpa;
> int err;
> char *my_rd_wr_page = NULL;
>
> my_rd_wr_page = __vmalloc(
> 1 * PAGE_SIZE,
> GFP_KERNEL | __GFP_HIGHMEM,
> __pgprot(__PAGE_KERNEL & ~_PAGE_NX));
>
> my_gpa = vmalloc_to_pfn((char *)&my_rd_wr_page) << PAGE_SHIFT;
&my_rd_wr_page is the address of the variable (i.e. probably a pointer
into the current stack) and not the address of the page you are trying
to reference.
Secondly vmalloc_to_pfn will return you a guest physical address, while
hypercalls from PV guests always take an MFN.
On the hypercall side your call to gmfn_to_mfn is normally an identity
function for a PV guest which map_domain_page takes a machine address.
So I think you need to launder the address through the p2m in the kernel
before passing it to the hypercall.
> printk("%s: Before Hypercall; my_rd_wr_page=%p my_gpa=%lx\n",
> __FUNCTION__, my_rd_wr_page, my_gpa);
> memset(my_rd_wr_page, 0, PAGE_SIZE);
> err = _hypercall2(int, my_rd_wr, 0x1, (void *)&my_gpa);
> printk("%s: Hypercall returned; errno-%d\n", __FUNCTION__, err);
> }
>
>
> When I loaded the module, the following error has been observed:
>
> =============== On dom0 ===========
> xen_features[0].writable_page_tables = 0
> xen_features[0].writable_descriptor_tables = 0
> xen_features[0].auto_translated_physmap = 0
> xen_features[0].supervisor_mode_kernel = 0
> xen_features[0].pae_pgdir_above_4gb = 1
> my_rd_wr_page_setup: Before Hypercall; my_rd_wr_page=ffffc90010f7e000
> my_gpa=d7cf000
> my_rd_wr_page_setup: Hypercall returned; errno-0
> =====================================
> On hypervisor:
> (XEN) do_my_rd_wr:L178: GPA read 0xd7cf000
> (XEN) mm.c:2037:d0 Error pfn d7cf: rd=ffff8300773c0000, od=0000000000000000,
> caf=180000000000000, taf=0000000000000000
> (XEN) Bad GMFN d7cf (MFN d7cf)
> ====================================
>
> From the dom0 messages (where i read the features), it looks like
> writable_page_tables is not set. Is it causing the issue in my case.
Writable page tables is something else, it relates to how a _guest_ can
update it's own page tables, not how Xen creates mappings of things.
>
> Could you please advice if i did something wrong here.
> You are most welcome if you have completely different approach which works;
>
> Thanks a lot in advance
>
> Regards,
> VSR.
_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-devel
|
Home