=~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2011.05.17 23:18:01 =~=~=~=~=~=~=~=~=~=~=~= __ __ _ _ ____ _ _ _ \ \/ /___ _ __ | || | |___ \ _ _ _ __ ___| |_ __ _| |__ | | ___ \ // _ \ '_ \ | || |_ __) |__| | | | '_ \/ __| __/ _` | '_ \| |/ _ \ / \ __/ | | | |__ _| / __/|__| |_| | | | \__ \ || (_| | |_) | | __/ /_/\_\___|_| |_| |_|(_)_____| \__,_|_| |_|___/\__\__,_|_.__/|_|\___| (XEN) Xen version 4.2-unstable (root@) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) Tue May 17 18:59:04 HKT 2011 (XEN) Latest ChangeSet: Thu May 12 16:42:54 2011 +0100 23339:f9bb0bbea7c2 (XEN) Console output is synchronous. (XEN) Bootloader: GRUB 1.98-1ubuntu12 (XEN) Command line: dom0_mem=1024M loglvl=all guest_loglvl=all sync_console console_to_ring com1=115200,8n1 console=com1 lapic=debug apic_verbosity=debug apic=debug iommu=off (XEN) Video information: (XEN) VGA is text mode 80x25, font 8x16 (XEN) VBE/DDC methods: none; EDID transfer time: 0 seconds (XEN) EDID info not retrieved because no DDC retrieval method detected (XEN) Disc information: (XEN) Found 1 MBR signatures (XEN) Found 1 EDD information structures (XEN) Xen-e820 RAM map: (XEN) 0000000000000000 - 000000000009dc00 (usable) (XEN) 000000000009dc00 - 00000000000a0000 (reserved) (XEN) 00000000000d2000 - 00000000000d4000 (reserved) (XEN) 00000000000e0000 - 0000000000100000 (reserved) (XEN) 0000000000100000 - 00000000bfeb0000 (usable) (XEN) 00000000bfeb0000 - 00000000bfecb000 (ACPI data) (XEN) 00000000bfecb000 - 00000000bfece000 (ACPI NVS) (XEN) 00000000bfece000 - 00000000c0000000 (reserved) (XEN) 00000000e0000000 - 00000000f0000000 (reserved) (XEN) 00000000fec00000 - 00000000fec10000 (reserved) (XEN) 00000000fed1c000 - 00000000fed20000 (reserved) (XEN) 00000000fee00000 - 00000000fee01000 (reserved) (XEN) 00000000ff000000 - 0000000100000000 (reserved) (XEN) 0000000100000000 - 0000000134000000 (usable) (XEN) ACPI: RSDP 000F61B0, 0014 (r0 PTLTD ) (XEN) ACPI: RSDT BFEC103B, 0048 (r1 LENOVO TC-2J 37 LTP 0) (XEN) ACPI: FACP BFECAE2B, 0074 (r1 LENOVO TC-2J 37 PTL 1) (XEN) ACPI: DSDT BFEC42E4, 6B47 (r1 LENOVO TC-2J 37 MSFT 100000E) (XEN) ACPI: FACS BFECDFC0, 0040 (XEN) ACPI: TCPA BFECAE9F, 0032 (r2 LENOVO TC-2J 37 PTL 0) (XEN) ACPI: ASF! BFECAED1, 0063 (r16 CETP 2JETP 37 PTL 1) (XEN) ACPI: MCFG BFECAF34, 003C (r1 PTLTD M2JG 37 LTP 0) (XEN) ACPI: APIC BFECAF70, 0068 (r1 PTLTD A2JC 37 LTP 0) (XEN) ACPI: BOOT BFECAFD8, 0028 (r1 PTLTD $SB2JBL$ 37 LTP 1) (XEN) ACPI: SSDT BFEC252E, 025F (r1 PmRef Cpu0Tst 3000 INTL 20050228) (XEN) ACPI: SSDT BFEC2488, 00A6 (r1 PmRef Cpu1Tst 3000 INTL 20050228) (XEN) ACPI: SSDT BFEC1083, 1405 (r1 PmRef CpuPm 3000 INTL 20050228) (XEN) System RAM: 3902MB (3995956kB) (XEN) No NUMA configuration found (XEN) Faking a node at 0000000000000000-0000000134000000 (XEN) Domain heap initialised (XEN) found SMP MP-table at 000f6300 (XEN) DMI present. (XEN) Using APIC driver default (XEN) ACPI: PM-Timer IO Port: 0x1008 (XEN) ACPI: ACPI SLEEP INFO: pm1x_cnt[fe10,0], pm1x_evt[1000,0] (XEN) ACPI: wakeup_vec[bfecdfcc], vec_size[20] (XEN) ACPI: Local APIC address 0xfee00000 (XEN) ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) (XEN) Processor #0 6:15 APIC version 20 (XEN) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) (XEN) Processor #1 6:15 APIC version 20 (XEN) ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) (XEN) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) (XEN) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) (XEN) IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 (XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge) (XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) (XEN) ACPI: IRQ0 used by override. (XEN) ACPI: IRQ2 used by override. (XEN) ACPI: IRQ9 used by override. (XEN) Enabling APIC mode: Flat. Using 1 I/O APICs (XEN) PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 9 (XEN) PCI: MCFG area at e0000000 reserved in E820 (XEN) Table is not found! (XEN) Using ACPI (MADT) for SMP configuration information (XEN) mapped APIC to ffff82c3ffefe000 (fee00000) (XEN) mapped IOAPIC to ffff82c3ffefd000 (fec00000) (XEN) IRQ limits: 24 GSI, 376 MSI/MSI-X (XEN) Using scheduler: SMP Credit Scheduler (credit) (XEN) Detected 1862.032 MHz processor. (XEN) Initing memory sharing. (XEN) mce_intel.c:1206: MCA Capability: BCAST 1 SER 0 CMCI 0 firstbank 1 extended MCE MSR 0 (XEN) CPU0: Thermal monitoring handled by SMI (XEN) Intel machine check reporting enabled (XEN) ..... CPU clock speed is 1862.0408 MHz. (XEN) ..... host bus clock speed is 266.0056 MHz. (XEN) ..... bus_scale = 0x00011069 (XEN) Platform timer is 3.579MHz ACPI PM Timer ÿ(XEN) Allocated console ring of 16 KiB. (XEN) VMX: Supported advanced features: (XEN) - APIC TPR shadow (XEN) - MSR direct-access bitmap (XEN) HVM: ASIDs disabled. (XEN) HVM: VMX enabled (XEN) masked ExtINT on CPU#1 (XEN) Brought up 2 CPUs (XEN) CPUIDLE: disabled due to no HPET. Force enable with 'cpuidle'. (XEN) ACPI sleep modes: S3 (XEN) mcheck_poll: Machine check polling timer started. (XEN) *** LOADING DOMAIN 0 *** (XEN) elf_parse_binary: phdr: paddr=0x1000000 memsz=0x874000 (XEN) elf_parse_binary: phdr: paddr=0x1874000 memsz=0xcc498 (XEN) elf_parse_binary: phdr: paddr=0x1941000 memsz=0x888 (XEN) elf_parse_binary: phdr: paddr=0x1942000 memsz=0x159d8 (XEN) elf_parse_binary: phdr: paddr=0x1958000 memsz=0x28b000 (XEN) elf_parse_binary: memory: 0x1000000 -> 0x1be3000 (XEN) elf_xen_parse_note: GUEST_OS = "linux" (XEN) elf_xen_parse_note: GUEST_VERSION = "2.6" (XEN) elf_xen_parse_note: XEN_VERSION = "xen-3.0" (XEN) elf_xen_parse_note: VIRT_BASE = 0xffffffff80000000 (XEN) elf_xen_parse_note: ENTRY = 0xffffffff81958200 (XEN) elf_xen_parse_note: HYPERCALL_PAGE = 0xffffffff81009000 (XEN) elf_xen_parse_note: FEATURES = "!writable_page_tables|pae_pgdir_above_4gb" (XEN) elf_xen_parse_note: PAE_MODE = "yes" (XEN) elf_xen_parse_note: LOADER = "generic" (XEN) elf_xen_parse_note: unknown xen elf note (0xd) (XEN) elf_xen_parse_note: SUSPEND_CANCEL = 0x1 (XEN) elf_xen_parse_note: HV_START_LOW = 0xffff800000000000 (XEN) elf_xen_parse_note: PADDR_OFFSET = 0x0 (XEN) elf_xen_addr_calc_check: addresses: (XEN) virt_base = 0xffffffff80000000 (XEN) elf_paddr_offset = 0x0 (XEN) virt_offset = 0xffffffff80000000 (XEN) virt_kstart = 0xffffffff81000000 (XEN) virt_kend = 0xffffffff81be3000 (XEN) virt_entry = 0xffffffff81958200 (XEN) p2m_base = 0xffffffffffffffff (XEN) Xen kernel: 64-bit, lsb, compat32 (XEN) Dom0 kernel: 64-bit, PAE, lsb, paddr 0x1000000 -> 0x1be3000 (XEN) PHYSICAL MEMORY ARRANGEMENT: (XEN) Dom0 alloc.: 0000000128000000->000000012c000000 (243826 pages to be allocated) (XEN) Init. ramdisk: 0000000133872000->0000000133fffe00 (XEN) VIRTUAL MEMORY ARRANGEMENT: (XEN) Loaded kernel: ffffffff81000000->ffffffff81be3000 (XEN) Init. ramdisk: ffffffff81be3000->ffffffff82370e00 (XEN) Phys-Mach map: ffffffff82371000->ffffffff82571000 (XEN) Start info: ffffffff82571000->ffffffff825714b4 (XEN) Page tables: ffffffff82572000->ffffffff82589000 (XEN) Boot stack: ffffffff82589000->ffffffff8258a000 (XEN) TOTAL: ffffffff80000000->ffffffff82800000 (XEN) ENTRY ADDRESS: ffffffff81958200 (XEN) Dom0 has maximum 2 VCPUs (XEN) elf_load_binary: phdr 0 at 0xffffffff81000000 -> 0xffffffff81874000 (XEN) elf_load_binary: phdr 1 at 0xffffffff81874000 -> 0xffffffff81940498 (XEN) elf_load_binary: phdr 2 at 0xffffffff81941000 -> 0xffffffff81941888 (XEN) elf_load_binary: phdr 3 at 0xffffffff81942000 -> 0xffffffff819579d8 (XEN) elf_load_binary: phdr 4 at 0xffffffff81958000 -> 0xffffffff819e3000 (XEN) Scrubbing Free RAM: ............................done. (XEN) Std. Loglevel: All (XEN) Guest Loglevel: All (XEN) ********************************************** (XEN) ******* WARNING: CONSOLE OUTPUT IS SYNCHRONOUS (XEN) ******* This option is intended to aid debugging of Xen by ensuring (XEN) ******* that all output is synchronously delivered on the serial line. (XEN) ******* However it can introduce SIGNIFICANT latencies and affect (XEN) ******* timekeeping. It is NOT recommended for production use! (XEN) ********************************************** (XEN) 3... 2... 1... (XEN) *** Serial input -> DOM0 (type 'CTRL-a' three times to switch input to Xen) (XEN) Freed 232kB init memory. mapping kernel into physical memory Xen: setup ISA identity maps about to get started... [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.32.28 (root@gavinguan-desktop) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #1 SMP Tue May 17 22:17:12 HKT 2011 [ 0.000000] Command line: nopat root=/dev/sda9 ro console=tty0 console=ttyS0,115200n8 console=hvc0 earlyprintk=xen nomodeset initcall_debug debug loglevel=10 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] released 0 pages of unused memory [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] Xen: 0000000000000000 - 000000000009d000 (usable) [ 0.000000] Xen: 000000000009dc00 - 0000000000100000 (reserved) [ 0.000000] Xen: 0000000000100000 - 0000000040000000 (usable) [ 0.000000] Xen: 00000000bfeb0000 - 00000000bfecb000 (ACPI data) [ 0.000000] Xen: 00000000bfecb000 - 00000000bfece000 (ACPI NVS) [ 0.000000] Xen: 00000000bfece000 - 00000000c0000000 (reserved) [ 0.000000] Xen: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] Xen: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] Xen: 00000000fed1c000 - 00000000fed20000 (reserved) [ 0.000000] Xen: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] Xen: 00000000ff000000 - 0000000100000000 (reserved) [ 0.000000] Xen: 0000000100000000 - 00000001b3eb0000 (usable) [ 0.000000] PAT support disabled. [ 0.000000] bootconsole [xenboot0] enabled [ 0.000000] DMI present. [ 0.000000] last_pfn = 0x1b3eb0 max_arch_pfn = 0x400000000 [ 0.000000] last_pfn = 0x40000 max_arch_pfn = 0x400000000 [ 0.000000] e820 update range: 0000000000001000 - 0000000000006000 (usable) ==> (reserved) [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000001000 (usable) [ 0.000000] modified: 0000000000001000 - 0000000000006000 (reserved) [ 0.000000] modified: 0000000000006000 - 000000000009d000 (usable) [ 0.000000] modified: 000000000009dc00 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 0000000040000000 (usable) [ 0.000000] modified: 00000000bfeb0000 - 00000000bfecb000 (ACPI data) [ 0.000000] modified: 00000000bfecb000 - 00000000bfece000 (ACPI NVS) [ 0.000000] modified: 00000000bfece000 - 00000000c0000000 (reserved) [ 0.000000] modified: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] modified: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] modified: 00000000fed1c000 - 00000000fed20000 (reserved) [ 0.000000] modified: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] modified: 00000000ff000000 - 0000000100000000 (reserved) [ 0.000000] modified: 0000000100000000 - 00000001b3eb0000 (usable) [ 0.000000] initial memory mapped : 0 - 02fff000 [ 0.000000] init_memory_mapping: 0000000000000000-0000000040000000 [ 0.000000] 0000000000 - 0040000000 page 4k [ 0.000000] kernel direct mapping tables up to 40000000 @ 100000-302000 [ 0.000000] init_memory_mapping: 0000000100000000-00000001b3eb0000 [ 0.000000] 0100000000 - 01b3eb0000 page 4k [ 0.000000] kernel direct mapping tables up to 1b3eb0000 @ 2589000-3331000 [ 0.000000] RAMDISK: 01be3000 - 02370e00 [ 0.000000] ACPI: RSDP 00000000000f61b0 00014 (v00 PTLTD ) [ 0.000000] ACPI: RSDT 00000000bfec103b 00048 (v01 LENOVO TC-2J 00000037 LTP 00000000) [ 0.000000] ACPI: FACP 00000000bfecae2b 00074 (v01 LENOVO TC-2J 00000037 PTL 00000001) [ 0.000000] ACPI: DSDT 00000000bfec42e4 06B47 (v01 LENOVO TC-2J 00000037 MSFT 0100000E) [ 0.000000] ACPI: FACS 00000000bfecdfc0 00040 [ 0.000000] ACPI: TCPA 00000000bfecae9f 00032 (v02 LENOVO TC-2J 00000037 PTL 00000000) [ 0.000000] ACPI: ASF! 00000000bfecaed1 00063 (v16 CETP 2JETP 00000037 PTL 00000001) [ 0.000000] ACPI: MCFG 00000000bfecaf34 0003C (v01 PTLTD M2JG 00000037 LTP 00000000) [ 0.000000] ACPI: APIC 00000000bfecaf70 00068 (v01 PTLTD ? A2JC 00000037 LTP 00000000) [ 0.000000] ACPI: BOOT 00000000bfecafd8 00028 (v01 PTLTD $SB2JBL$ 00000037 LTP 00000001) [ 0.000000] ACPI: SSDT 00000000bfec252e 0025F (v01 PmRef Cpu0Tst 00003000 INTL 20050228) [ 0.000000] ACPI: SSDT 00000000bfec2488 000A6 (v01 PmRef Cpu1Tst 00003000 INTL 20050228) [ 0.000000] ACPI: SSDT 00000000bfec1083 01405 (v01 PmRef CpuPm 00003000 INTL 20050228) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] (10 early reservations) ==> bootmem [0000000000 - 01b3eb0000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0002572000 - 0002589000] XEN PAGETABLES ==> [0002572000 - 0002589000] [ 0.000000] #2 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] [ 0.000000] #3 [0001000000 - 0001ab8054] TEXT DATA BSS ==> [0001000000 - 0001ab8054] [ 0.000000] #4 [0001be3000 - 0002370e00] RAMDISK ==> [0001be3000 - 0002370e00] [ 0.000000] #5 [0002371000 - 0002572000] XEN START INFO ==> [0002371000 - 0002572000] [ 0.000000] #6 [0100000000 - 01b3eb0000] XEN EXTRA ==> [0100000000 - 01b3eb0000] [ 0.000000] #7 [0001ab9000 - 0001ac5100] BRK ==> [0001ab9000 - 0001ac5100] [ 0.000000] #8 [0000100000 - 00002e8000] PGTABLE ==> [0000100000 - 00002e8000] [ 0.000000] #9 [0002589000 - 0002b2c000] PGTABLE ==> [0002589000 - 0002b2c000] [ 0.000000] found SMP MP-table at [ffff8800000f6300] f6300 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000000 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x001b3eb0 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[4] active PFN ranges [ 0.000000] 0: 0x00000000 -> 0x00000001 [ 0.000000] 0: 0x00000006 -> 0x0000009d [ 0.000000] 0: 0x00000100 -> 0x00040000 [ 0.000000] 0: 0x00100000 -> 0x001b3eb0 [ 0.000000] On node 0 totalpages: 998984 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 491 pages reserved [ 0.000000] DMA zone: 3445 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 14280 pages used for memmap [ 0.000000] DMA32 zone: 243768 pages, LIFO batch:31 [ 0.000000] Normal zone: 10076 pages used for memmap [ 0.000000] Normal zone: 726868 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 0, address 0xfec00000, GSI 0-0 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge) [ 0.000000] ERROR: Unable to locate IOAPIC for GSI 2 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ERROR: Unable to locate IOAPIC for GSI 9 [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 256 [ 0.000000] PM: Registered nosave memory: 0000000000001000 - 0000000000006000 [ 0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000 [ 0.000000] PM: Registered nosave memory: 000000000009e000 - 0000000000100000 [ 0.000000] PM: Registered nosave memory: 0000000040000000 - 00000000bfeb0000 [ 0.000000] PM: Registered nosave memory: 00000000bfeb0000 - 00000000bfecb000 [ 0.000000] PM: Registered nosave memory: 00000000bfecb000 - 00000000bfece000 [ 0.000000] PM: Registered nosave memory: 00000000bfece000 - 00000000c0000000 [ 0.000000] PM: Registered nosave memory: 00000000c0000000 - 00000000e0000000 [ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000 [ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000fec00000 [ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec10000 [ 0.000000] PM: Registered nosave memory: 00000000fec10000 - 00000000fed1c000 [ 0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000 [ 0.000000] PM: Registered nosave memory: 00000000fed20000 - 00000000fee00000 [ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000 [ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ff000000 [ 0.000000] PM: Registered nosave memory: 00000000ff000000 - 0000000100000000 [ 0.000000] Allocating PCI resources starting at 40000000 (gap: 40000000:7feb0000) [ 0.000000] Booting paravirtualized kernel on Xen [ 0.000000] Xen version: 4.2-unstable (preserve-AD) (dom0) [ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff88002804f000 s88536 r8192 d22056 u118784 [ 0.000000] pcpu-alloc: s88536 r8192 d22056 u118784 alloc=29*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 974081 [ 0.000000] Kernel command line: nopat root=/dev/sda9 ro console=tty0 console=ttyS0,115200n8 console=hvc0 earlyprintk=xen nomodeset initcall_debug debug loglevel=10 [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.000000] Initializing CPU#0 [ 0.000000] DMA: Placing 64MB software IO TLB between ffff880020000000 - ffff880024000000 [ 0.000000] DMA: software IO TLB at phys 0x20000000 - 0x24000000 [ 0.000000] xen_swiotlb_fixup: buf=ffff880020000000 size=67108864 [ 0.000000] xen_swiotlb_fixup: buf=ffff880024060000 size=32768 [ 0.000000] Memory: 890524k/7142080k available (5805k kernel code, 3146144k absent, 3104676k reserved, 3668k data, 596k init) [ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:4352 nr_irqs:768 [ 0.000000] xen: --> irq=0 [ 0.000000] xen: --> irq=1 [ 0.000000] xen: --> irq=2 [ 0.000000] xen: --> irq=3 [ 0.000000] xen: --> irq=4 [ 0.000000] xen: --> irq=5 [ 0.000000] xen: --> irq=6 [ 0.000000] xen: --> irq=7 [ 0.000000] xen: --> irq=8 [ 0.000000] xen: --> irq=9 [ 0.000000] xen: --> irq=10 [ 0.000000] xen: --> irq=11 [ 0.000000] xen: --> irq=12 [ 0.000000] xen: --> irq=13 [ 0.000000] xen: --> irq=14 [ 0.000000] xen: --> irq=15 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] xen: sci override: source_irq=9 global_irq=9 trigger=c polarity=1 [ 0.000000] xen: registering gsi 9 triggering 0 polarity 0 [ 0.000000] xen_allocate_pirq: returning irq 9 for gsi 9 [ 0.000000] xen: --> irq=9 (XEN) IOAPIC[0]: Set PCI routing entry (2-9 -> 0x58 -> IRQ 9 Mode:1 Active:0) [ 0.000000] xen: acpi sci 9 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.32.28 (root@gavinguan-desktop) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #1 SMP Tue May 17 22:17:12 HKT 2011 [ 0.000000] Command line: nopat root=/dev/sda9 ro console=tty0 console=ttyS0,115200n8 console=hvc0 earlyprintk=xen nomodeset initcall_debug debug loglevel=10 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] released 0 pages of unused memory [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] Xen: 0000000000000000 - 000000000009d000 (usable) [ 0.000000] Xen: 000000000009dc00 - 0000000000100000 (reserved) [ 0.000000] Xen: 0000000000100000 - 0000000040000000 (usable) [ 0.000000] Xen: 00000000bfeb0000 - 00000000bfecb000 (ACPI data) [ 0.000000] Xen: 00000000bfecb000 - 00000000bfece000 (ACPI NVS) [ 0.000000] Xen: 00000000bfece000 - 00000000c0000000 (reserved) [ 0.000000] Xen: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] Xen: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] Xen: 00000000fed1c000 - 00000000fed20000 (reserved) [ 0.000000] Xen: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] Xen: 00000000ff000000 - 0000000100000000 (reserved) [ 0.000000] Xen: 0000000100000000 - 00000001b3eb0000 (usable) [ 0.000000] PAT support disabled. [ 0.000000] bootconsole [xenboot0] enabled [ 0.000000] DMI present. [ 0.000000] last_pfn = 0x1b3eb0 max_arch_pfn = 0x400000000 [ 0.000000] last_pfn = 0x40000 max_arch_pfn = 0x400000000 [ 0.000000] e820 update range: 0000000000001000 - 0000000000006000 (usable) ==> (reserved) [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000001000 (usable) [ 0.000000] modified: 0000000000001000 - 0000000000006000 (reserved) [ 0.000000] modified: 0000000000006000 - 000000000009d000 (usable) [ 0.000000] modified: 000000000009dc00 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 0000000040000000 (usable) [ 0.000000] modified: 00000000bfeb0000 - 00000000bfecb000 (ACPI data) [ 0.000000] modified: 00000000bfecb000 - 00000000bfece000 (ACPI NVS) [ 0.000000] modified: 00000000bfece000 - 00000000c0000000 (reserved) [ 0.000000] modified: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] modified: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] modified: 00000000fed1c000 - 00000000fed20000 (reserved) [ 0.000000] modified: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] modified: 00000000ff000000 - 0000000100000000 (reserved) [ 0.000000] modified: 0000000100000000 - 00000001b3eb0000 (usable) [ 0.000000] initial memory mapped : 0 - 02fff000 [ 0.000000] init_memory_mapping: 0000000000000000-0000000040000000 [ 0.000000] 0000000000 - 0040000000 page 4k [ 0.000000] kernel direct mapping tables up to 40000000 @ 100000-302000 [ 0.000000] init_memory_mapping: 0000000100000000-00000001b3eb0000 [ 0.000000] 0100000000 - 01b3eb0000 page 4k [ 0.000000] kernel direct mapping tables up to 1b3eb0000 @ 2589000-3331000 [ 0.000000] RAMDISK: 01be3000 - 02370e00 [ 0.000000] ACPI: RSDP 00000000000f61b0 00014 (v00 PTLTD ) [ 0.000000] ACPI: RSDT 00000000bfec103b 00048 (v01 LENOVO TC-2J 00000037 LTP 00000000) [ 0.000000] ACPI: FACP 00000000bfecae2b 00074 (v01 LENOVO TC-2J 00000037 PTL 00000001) [ 0.000000] ACPI: DSDT 00000000bfec42e4 06B47 (v01 LENOVO TC-2J 00000037 MSFT 0100000E) [ 0.000000] ACPI: FACS 00000000bfecdfc0 00040 [ 0.000000] ACPI: TCPA 00000000bfecae9f 00032 (v02 LENOVO TC-2J 00000037 PTL 00000000) [ 0.000000] ACPI: ASF! 00000000bfecaed1 00063 (v16 CETP 2JETP 00000037 PTL 00000001) [ 0.000000] ACPI: MCFG 00000000bfecaf34 0003C (v01 PTLTD M2JG 00000037 LTP 00000000) [ 0.000000] ACPI: APIC 00000000bfecaf70 00068 (v01 PTLTD ? A2JC 00000037 LTP 00000000) [ 0.000000] ACPI: BOOT 00000000bfecafd8 00028 (v01 PTLTD $SB2JBL$ 00000037 LTP 00000001) [ 0.000000] ACPI: SSDT 00000000bfec252e 0025F (v01 PmRef Cpu0Tst 00003000 INTL 20050228) [ 0.000000] ACPI: SSDT 00000000bfec2488 000A6 (v01 PmRef Cpu1Tst 00003000 INTL 20050228) [ 0.000000] ACPI: SSDT 00000000bfec1083 01405 (v01 PmRef CpuPm 00003000 INTL 20050228) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] (10 early reservations) ==> bootmem [0000000000 - 01b3eb0000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0002572000 - 0002589000] XEN PAGETABLES ==> [0002572000 - 0002589000] [ 0.000000] #2 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] [ 0.000000] #3 [0001000000 - 0001ab8054] TEXT DATA BSS ==> [0001000000 - 0001ab8054] [ 0.000000] #4 [0001be3000 - 0002370e00] RAMDISK ==> [0001be3000 - 0002370e00] [ 0.000000] #5 [0002371000 - 0002572000] XEN START INFO ==> [0002371000 - 0002572000] [ 0.000000] #6 [0100000000 - 01b3eb0000] XEN EXTRA ==> [0100000000 - 01b3eb0000] [ 0.000000] #7 [0001ab9000 - 0001ac5100] BRK ==> [0001ab9000 - 0001ac5100] [ 0.000000] #8 [0000100000 - 00002e8000] PGTABLE ==> [0000100000 - 00002e8000] [ 0.000000] #9 [0002589000 - 0002b2c000] PGTABLE ==> [0002589000 - 0002b2c000] [ 0.000000] found SMP MP-table at [ffff8800000f6300] f6300 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000000 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x001b3eb0 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[4] active PFN ranges [ 0.000000] 0: 0x00000000 -> 0x00000001 [ 0.000000] 0: 0x00000006 -> 0x0000009d [ 0.000000] 0: 0x00000100 -> 0x00040000 [ 0.000000] 0: 0x00100000 -> 0x001b3eb0 [ 0.000000] On node 0 totalpages: 998984 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 491 pages reserved [ 0.000000] DMA zone: 3445 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 14280 pages used for memmap [ 0.000000] DMA32 zone: 243768 pages, LIFO batch:31 [ 0.000000] Normal zone: 10076 pages used for memmap [ 0.000000] Normal zone: 726868 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 0, address 0xfec00000, GSI 0-0 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge) [ 0.000000] ERROR: Unable to locate IOAPIC for GSI 2 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ERROR: Unable to locate IOAPIC for GSI 9 [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 256 [ 0.000000] PM: Registered nosave memory: 0000000000001000 - 0000000000006000 [ 0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000 [ 0.000000] PM: Registered nosave memory: 000000000009e000 - 0000000000100000 [ 0.000000] PM: Registered nosave memory: 0000000040000000 - 00000000bfeb0000 [ 0.000000] PM: Registered nosave memory: 00000000bfeb0000 - 00000000bfecb000 [ 0.000000] PM: Registered nosave memory: 00000000bfecb000 - 00000000bfece000 [ 0.000000] PM: Registered nosave memory: 00000000bfece000 - 00000000c0000000 [ 0.000000] PM: Registered nosave memory: 00000000c0000000 - 00000000e0000000 [ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000 [ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000fec00000 [ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec10000 [ 0.000000] PM: Registered nosave memory: 00000000fec10000 - 00000000fed1c000 [ 0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000 [ 0.000000] PM: Registered nosave memory: 00000000fed20000 - 00000000fee00000 [ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000 [ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ff000000 [ 0.000000] PM: Registered nosave memory: 00000000ff000000 - 0000000100000000 [ 0.000000] Allocating PCI resources starting at 40000000 (gap: 40000000:7feb0000) [ 0.000000] Booting paravirtualized kernel on Xen [ 0.000000] Xen version: 4.2-unstable (preserve-AD) (dom0) [ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff88002804f000 s88536 r8192 d22056 u118784 [ 0.000000] pcpu-alloc: s88536 r8192 d22056 u118784 alloc=29*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 974081 [ 0.000000] Kernel command line: nopat root=/dev/sda9 ro console=tty0 console=ttyS0,115200n8 console=hvc0 earlyprintk=xen nomodeset initcall_debug debug loglevel=10 [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.000000] Initializing CPU#0 [ 0.000000] DMA: Placing 64MB software IO TLB between ffff880020000000 - ffff880024000000 [ 0.000000] DMA: software IO TLB at phys 0x20000000 - 0x24000000 [ 0.000000] xen_swiotlb_fixup: buf=ffff880020000000 size=67108864 [ 0.000000] xen_swiotlb_fixup: buf=ffff880024060000 size=32768 [ 0.000000] Memory: 890524k/7142080k available (5805k kernel code, 3146144k absent, 3104676k reserved, 3668k data, 596k init) [ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:4352 nr_irqs:768 [ 0.000000] xen: --> irq=0 [ 0.000000] xen: --> irq=1 [ 0.000000] xen: --> irq=2 [ 0.000000] xen: --> irq=3 [ 0.000000] xen: --> irq=4 [ 0.000000] xen: --> irq=5 [ 0.000000] xen: --> irq=6 [ 0.000000] xen: --> irq=7 [ 0.000000] xen: --> irq=8 [ 0.000000] xen: --> irq=9 [ 0.000000] xen: --> irq=10 [ 0.000000] xen: --> irq=11 [ 0.000000] xen: --> irq=12 [ 0.000000] xen: --> irq=13 [ 0.000000] xen: --> irq=14 [ 0.000000] xen: --> irq=15 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] xen: sci override: source_irq=9 global_irq=9 trigger=c polarity=1 [ 0.000000] xen: registering gsi 9 triggering 0 polarity 0 [ 0.000000] xen_allocate_pirq: returning irq 9 for gsi 9 [ 0.000000] xen: --> irq=9 [ 0.000000] xen: acpi sci 9 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] console [hvc0] enabled, bootconsole disabled [ 0.000000] console [hvc0] enabled, bootconsole disabled [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.32.28 (root@gavinguan-desktop) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #1 SMP Tue May 17 22:17:12 HKT 2011 [ 0.000000] Command line: nopat root=/dev/sda9 ro console=tty0 console=ttyS0,115200n8 console=hvc0 earlyprintk=xen nomodeset initcall_debug debug loglevel=10 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] released 0 pages of unused memory [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] Xen: 0000000000000000 - 000000000009d000 (usable) [ 0.000000] Xen: 000000000009dc00 - 0000000000100000 (reserved) [ 0.000000] Xen: 0000000000100000 - 0000000040000000 (usable) [ 0.000000] Xen: 00000000bfeb0000 - 00000000bfecb000 (ACPI data) [ 0.000000] Xen: 00000000bfecb000 - 00000000bfece000 (ACPI NVS) [ 0.000000] Xen: 00000000bfece000 - 00000000c0000000 (reserved) [ 0.000000] Xen: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] Xen: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] Xen: 00000000fed1c000 - 00000000fed20000 (reserved) [ 0.000000] Xen: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] Xen: 00000000ff000000 - 0000000100000000 (reserved) [ 0.000000] Xen: 0000000100000000 - 00000001b3eb0000 (usable) [ 0.000000] PAT support disabled. [ 0.000000] bootconsole [xenboot0] enabled [ 0.000000] DMI present. [ 0.000000] last_pfn = 0x1b3eb0 max_arch_pfn = 0x400000000 [ 0.000000] last_pfn = 0x40000 max_arch_pfn = 0x400000000 [ 0.000000] e820 update range: 0000000000001000 - 0000000000006000 (usable) ==> (reserved) [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000001000 (usable) [ 0.000000] modified: 0000000000001000 - 0000000000006000 (reserved) [ 0.000000] modified: 0000000000006000 - 000000000009d000 (usable) [ 0.000000] modified: 000000000009dc00 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 0000000040000000 (usable) [ 0.000000] modified: 00000000bfeb0000 - 00000000bfecb000 (ACPI data) [ 0.000000] modified: 00000000bfecb000 - 00000000bfece000 (ACPI NVS) [ 0.000000] modified: 00000000bfece000 - 00000000c0000000 (reserved) [ 0.000000] modified: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] modified: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] modified: 00000000fed1c000 - 00000000fed20000 (reserved) [ 0.000000] modified: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] modified: 00000000ff000000 - 0000000100000000 (reserved) [ 0.000000] modified: 0000000100000000 - 00000001b3eb0000 (usable) [ 0.000000] initial memory mapped : 0 - 02fff000 [ 0.000000] init_memory_mapping: 0000000000000000-0000000040000000 [ 0.000000] 0000000000 - 0040000000 page 4k [ 0.000000] kernel direct mapping tables up to 40000000 @ 100000-302000 [ 0.000000] init_memory_mapping: 0000000100000000-00000001b3eb0000 [ 0.000000] 0100000000 - 01b3eb0000 page 4k [ 0.000000] kernel direct mapping tables up to 1b3eb0000 @ 2589000-3331000 [ 0.000000] RAMDISK: 01be3000 - 02370e00 [ 0.000000] ACPI: RSDP 00000000000f61b0 00014 (v00 PTLTD ) [ 0.000000] ACPI: RSDT 00000000bfec103b 00048 (v01 LENOVO TC-2J 00000037 LTP 00000000) [ 0.000000] ACPI: FACP 00000000bfecae2b 00074 (v01 LENOVO TC-2J 00000037 PTL 00000001) [ 0.000000] ACPI: DSDT 00000000bfec42e4 06B47 (v01 LENOVO TC-2J 00000037 MSFT 0100000E) [ 0.000000] ACPI: FACS 00000000bfecdfc0 00040 [ 0.000000] ACPI: TCPA 00000000bfecae9f 00032 (v02 LENOVO TC-2J 00000037 PTL 00000000) [ 0.000000] ACPI: ASF! 00000000bfecaed1 00063 (v16 CETP 2JETP 00000037 PTL 00000001) [ 0.000000] ACPI: MCFG 00000000bfecaf34 0003C (v01 PTLTD M2JG 00000037 LTP 00000000) [ 0.000000] ACPI: APIC 00000000bfecaf70 00068 (v01 PTLTD ? A2JC 00000037 LTP 00000000) [ 0.000000] ACPI: BOOT 00000000bfecafd8 00028 (v01 PTLTD $SB2JBL$ 00000037 LTP 00000001) [ 0.000000] ACPI: SSDT 00000000bfec252e 0025F (v01 PmRef Cpu0Tst 00003000 INTL 20050228) [ 0.000000] ACPI: SSDT 00000000bfec2488 000A6 (v01 PmRef Cpu1Tst 00003000 INTL 20050228) [ 0.000000] ACPI: SSDT 00000000bfec1083 01405 (v01 PmRef CpuPm 00003000 INTL 20050228) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] (10 early reservations) ==> bootmem [0000000000 - 01b3eb0000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0002572000 - 0002589000] XEN PAGETABLES ==> [0002572000 - 0002589000] [ 0.000000] #2 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] [ 0.000000] #3 [0001000000 - 0001ab8054] TEXT DATA BSS ==> [0001000000 - 0001ab8054] [ 0.000000] #4 [0001be3000 - 0002370e00] RAMDISK ==> [0001be3000 - 0002370e00] [ 0.000000] #5 [0002371000 - 0002572000] XEN START INFO ==> [0002371000 - 0002572000] [ 0.000000] #6 [0100000000 - 01b3eb0000] XEN EXTRA ==> [0100000000 - 01b3eb0000] [ 0.000000] #7 [0001ab9000 - 0001ac5100] BRK ==> [0001ab9000 - 0001ac5100] [ 0.000000] #8 [0000100000 - 00002e8000] PGTABLE ==> [0000100000 - 00002e8000] [ 0.000000] #9 [0002589000 - 0002b2c000] PGTABLE ==> [0002589000 - 0002b2c000] [ 0.000000] found SMP MP-table at [ffff8800000f6300] f6300 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000000 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x001b3eb0 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[4] active PFN ranges [ 0.000000] 0: 0x00000000 -> 0x00000001 [ 0.000000] 0: 0x00000006 -> 0x0000009d [ 0.000000] 0: 0x00000100 -> 0x00040000 [ 0.000000] 0: 0x00100000 -> 0x001b3eb0 [ 0.000000] On node 0 totalpages: 998984 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 491 pages reserved [ 0.000000] DMA zone: 3445 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 14280 pages used for memmap [ 0.000000] DMA32 zone: 243768 pages, LIFO batch:31 [ 0.000000] Normal zone: 10076 pages used for memmap [ 0.000000] Normal zone: 726868 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 0, address 0xfec00000, GSI 0-0 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge) [ 0.000000] ERROR: Unable to locate IOAPIC for GSI 2 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ERROR: Unable to locate IOAPIC for GSI 9 [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 256 [ 0.000000] PM: Registered nosave memory: 0000000000001000 - 0000000000006000 [ 0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000 [ 0.000000] PM: Registered nosave memory: 000000000009e000 - 0000000000100000 [ 0.000000] PM: Registered nosave memory: 0000000040000000 - 00000000bfeb0000 [ 0.000000] PM: Registered nosave memory: 00000000bfeb0000 - 00000000bfecb000 [ 0.000000] PM: Registered nosave memory: 00000000bfecb000 - 00000000bfece000 [ 0.000000] PM: Registered nosave memory: 00000000bfece000 - 00000000c0000000 [ 0.000000] PM: Registered nosave memory: 00000000c0000000 - 00000000e0000000 [ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000 [ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000fec00000 [ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec10000 [ 0.000000] PM: Registered nosave memory: 00000000fec10000 - 00000000fed1c000 [ 0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000 [ 0.000000] PM: Registered nosave memory: 00000000fed20000 - 00000000fee00000 [ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000 [ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ff000000 [ 0.000000] PM: Registered nosave memory: 00000000ff000000 - 0000000100000000 [ 0.000000] Allocating PCI resources starting at 40000000 (gap: 40000000:7feb0000) [ 0.000000] Booting paravirtualized kernel on Xen [ 0.000000] Xen version: 4.2-unstable (preserve-AD) (dom0) [ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff88002804f000 s88536 r8192 d22056 u118784 [ 0.000000] pcpu-alloc: s88536 r8192 d22056 u118784 alloc=29*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 974081 [ 0.000000] Kernel command line: nopat root=/dev/sda9 ro console=tty0 console=ttyS0,115200n8 console=hvc0 earlyprintk=xen nomodeset initcall_debug debug loglevel=10 [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.000000] Initializing CPU#0 [ 0.000000] DMA: Placing 64MB software IO TLB between ffff880020000000 - ffff880024000000 [ 0.000000] DMA: software IO TLB at phys 0x20000000 - 0x24000000 [ 0.000000] xen_swiotlb_fixup: buf=ffff880020000000 size=67108864 [ 0.000000] xen_swiotlb_fixup: buf=ffff880024060000 size=32768 [ 0.000000] Memory: 890524k/7142080k available (5805k kernel code, 3146144k absent, 3104676k reserved, 3668k data, 596k init) [ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:4352 nr_irqs:768 [ 0.000000] xen: --> irq=0 [ 0.000000] xen: --> irq=1 [ 0.000000] xen: --> irq=2 [ 0.000000] xen: --> irq=3 [ 0.000000] xen: --> irq=4 [ 0.000000] xen: --> irq=5 [ 0.000000] xen: --> irq=6 [ 0.000000] xen: --> irq=7 [ 0.000000] xen: --> irq=8 [ 0.000000] xen: --> irq=9 [ 0.000000] xen: --> irq=10 [ 0.000000] xen: --> irq=11 [ 0.000000] xen: --> irq=12 [ 0.000000] xen: --> irq=13 [ 0.000000] xen: --> irq=14 [ 0.000000] xen: --> irq=15 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] xen: sci override: source_irq=9 global_irq=9 trigger=c polarity=1 [ 0.000000] xen: registering gsi 9 triggering 0 polarity 0 [ 0.000000] xen_allocate_pirq: returning irq 9 for gsi 9 [ 0.000000] xen: --> irq=9 [ 0.000000] xen: acpi sci 9 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] console [hvc0] enabled, bootconsole disabled [ 0.000000] console [ttyS0] enabled [ 0.000000] Xen: using vcpuop timer interface [ 0.000000] installing Xen timer for CPU 0 [ 0.000000] alloc irq_desc for 767 on node -1 [ 0.000000] alloc kstat_irqs on node -1 [ 0.000000] Detected 1862.032 MHz processor. [ 0.000999] Calibrating delay loop (skipped), value calculated using timer frequency.. 3724.06 BogoMIPS (lpj=1862032) [ 0.000999] Security Framework initialized [ 0.000999] SELinux: Initializing. [ 0.000999] SELinux: Starting in permissive mode [ 0.000999] Mount-cache hash table entries: 256 [ 0.001337] Initializing cgroup subsys ns [ 0.001999] Initializing cgroup subsys cpuacct [ 0.001999] Initializing cgroup subsys freezer [ 0.002037] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.002999] CPU: L2 cache: 2048K [ 0.003010] CPU: Physical Processor ID: 0 [ 0.003999] CPU: Processor Core ID: 0 [ 0.004009] mce: CPU supports 6 MCE banks [ 0.005025] Performance Events: unsupported p6 CPU model 15 no PMU driver, software events only. [ 0.005999] SMP alternatives: switching to UP code [ 0.005999] ACPI: Core revision 20090903 [ 0.021273] alloc irq_desc for 766 on node -1 [ 0.021996] alloc kstat_irqs on node -1 [ 0.022009] cpu 0 spinlock event irq 766 [ 0.022996] alloc irq_desc for 765 on node -1 [ 0.022996] alloc kstat_irqs on node -1 [ 0.023007] alloc irq_desc for 764 on node -1 [ 0.023996] alloc kstat_irqs on node -1 [ 0.024007] alloc irq_desc for 763 on node -1 [ 0.024996] alloc kstat_irqs on node -1 [ 0.025009] alloc irq_desc for 762 on node -1 [ 0.025996] alloc kstat_irqs on node -1 [ 0.026026] calling migration_init+0x0/0x59 @ 1 [ 0.027060] initcall migration_init+0x0/0x59 returned 0 after 976 usecs [ 0.027995] calling spawn_ksoftirqd+0x0/0x59 @ 1 [ 0.028041] initcall spawn_ksoftirqd+0x0/0x59 returned 0 after 976 usecs [ 0.028995] calling init_call_single_data+0x0/0x89 @ 1 [ 0.028995] initcall init_call_single_data+0x0/0x89 returned 0 after 0 usecs [ 0.028995] calling relay_init+0x0/0x14 @ 1 [ 0.028995] initcall relay_init+0x0/0x14 returned 0 after 0 usecs [ 0.028995] calling tracer_alloc_buffers+0x0/0x173 @ 1 [ 0.028995] initcall tracer_alloc_buffers+0x0/0x173 returned 0 after 0 usecs [ 0.028995] calling init_trace_printk+0x0/0x12 @ 1 [ 0.028995] initcall init_trace_printk+0x0/0x12 returned 0 after 0 usecs [ 0.028995] calling mce_amd_init+0x0/0x33 @ 1 [ 0.028995] initcall mce_amd_init+0x0/0x33 returned 0 after 0 usecs [ 0.029096] installing Xen timer for CPU 1 [ 0.029995] alloc irq_desc for 761 on node -1 [ 0.029995] alloc kstat_irqs on node -1 [ 0.030009] alloc irq_desc for 760 on node -1 [ 0.030995] alloc kstat_irqs on node -1 [ 0.031006] cpu 1 spinlock event irq 760 [ 0.032028] SMP alternatives: switching to SMP code [ 0.032994] alloc irq_desc for 759 on node -1 [ 0.032994] alloc kstat_irqs on node -1 [ 0.033008] alloc irq_desc for 758 on node -1 [ 0.033994] alloc kstat_irqs on node -1 [ 0.034007] alloc irq_desc for 757 on node -1 [ 0.034994] alloc kstat_irqs on node -1 [ 0.035007] alloc irq_desc for 756 on node -1 [ 0.035994] alloc kstat_irqs on node -1 [ 0.000999] Initializing CPU#1 [ 0.000999] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.000999] CPU: L2 cache: 2048K [ 0.000999] CPU: Physical Processor ID: 0 [ 0.000999] CPU: Processor Core ID: 1 [ 0.036146] Brought up 2 CPUs [ 0.044467] calling init_mmap_min_addr+0x0/0x26 @ 1 [ 0.044993] initcall init_mmap_min_addr+0x0/0x26 returned 0 after 0 usecs [ 0.044993] calling init_cpufreq_transition_notifier_list+0x0/0x1b @ 1 [ 0.044993] initcall init_cpufreq_transition_notifier_list+0x0/0x1b returned 0 after 0 usecs [ 0.044993] calling net_ns_init+0x0/0xed @ 1 [ 0.045036] initcall net_ns_init+0x0/0xed returned 0 after 976 usecs [ 0.045993] calling e820_mark_nvs_memory+0x0/0x40 @ 1 [ 0.045993] initcall e820_mark_nvs_memory+0x0/0x40 returned 0 after 0 usecs [ 0.045993] calling cpufreq_tsc+0x0/0x28 @ 1 [ 0.045993] initcall cpufreq_tsc+0x0/0x28 returned 0 after 0 usecs [ 0.045993] calling pci_reboot_init+0x0/0x14 @ 1 [ 0.045993] initcall pci_reboot_init+0x0/0x14 returned 0 after 0 usecs [ 0.045993] calling init_lapic_sysfs+0x0/0x2d @ 1 [ 0.046361] initcall init_lapic_sysfs+0x0/0x2d returned 0 after 976 usecs [ 0.046992] calling alloc_frozen_cpus+0x0/0x8 @ 1 [ 0.046992] initcall alloc_frozen_cpus+0x0/0x8 returned 0 after 0 usecs [ 0.046992] calling sysctl_init+0x0/0x32 @ 1 [ 0.046992] initcall sysctl_init+0x0/0x32 returned 0 after 0 usecs [ 0.046992] calling ksysfs_init+0x0/0xc0 @ 1 [ 0.046992] initcall ksysfs_init+0x0/0xc0 returned 0 after 0 usecs [ 0.046992] calling async_init+0x0/0x60 @ 1 [ 0.047033] initcall async_init+0x0/0x60 returned 0 after 976 usecs [ 0.047992] calling init_jiffies_clocksource+0x0/0x12 @ 1 [ 0.047992] initcall init_jiffies_clocksource+0x0/0x12 returned 0 after 0 usecs [ 0.047992] calling pm_init+0x0/0x34 @ 1 [ 0.047992] initcall pm_init+0x0/0x34 returned 0 after 0 usecs [ 0.047992] calling pm_disk_init+0x0/0x19 @ 1 [ 0.047992] initcall pm_disk_init+0x0/0x19 returned 0 after 0 usecs [ 0.047992] calling swsusp_header_init+0x0/0x2c @ 1 [ 0.047992] initcall swsusp_header_init+0x0/0x2c returned 0 after 0 usecs [ 0.047992] calling init_zero_pfn+0x0/0x68 @ 1 [ 0.047992] initcall init_zero_pfn+0x0/0x68 returned 0 after 0 usecs [ 0.047992] calling filelock_init+0x0/0x2e @ 1 [ 0.047992] initcall filelock_init+0x0/0x2e returned 0 after 0 usecs [ 0.047992] calling init_misc_binfmt+0x0/0x44 @ 1 [ 0.047992] initcall init_misc_binfmt+0x0/0x44 returned 0 after 0 usecs [ 0.047992] calling init_script_binfmt+0x0/0x14 @ 1 [ 0.047992] initcall init_script_binfmt+0x0/0x14 returned 0 after 0 usecs [ 0.047992] calling init_elf_binfmt+0x0/0x14 @ 1 [ 0.047992] initcall init_elf_binfmt+0x0/0x14 returned 0 after 0 usecs [ 0.047992] calling init_compat_elf_binfmt+0x0/0x14 @ 1 [ 0.047992] initcall init_compat_elf_binfmt+0x0/0x14 returned 0 after 0 usecs [ 0.047992] calling debugfs_init+0x0/0x5c @ 1 [ 0.047992] initcall debugfs_init+0x0/0x5c returned 0 after 0 usecs [ 0.047992] calling random32_init+0x0/0xd8 @ 1 [ 0.047992] initcall random32_init+0x0/0xd8 returned 0 after 0 usecs [ 0.047992] calling __gnttab_init+0x0/0x21 @ 1 [ 0.048060] Grant table initialized [ 0.048992] initcall __gnttab_init+0x0/0x21 returned 0 after 976 usecs [ 0.048992] calling early_resume_init+0x0/0x19e @ 1 [ 0.048992] Time: 23:18:48 Date: 05/17/11 [ 0.048992] initcall early_resume_init+0x0/0x19e returned 0 after 0 usecs [ 0.048992] calling cpufreq_core_init+0x0/0x9b @ 1 [ 0.048992] initcall cpufreq_core_init+0x0/0x9b returned 0 after 0 usecs [ 0.048992] calling cpuidle_init+0x0/0x40 @ 1 [ 0.049012] initcall cpuidle_init+0x0/0x40 returned 0 after 976 usecs [ 0.049992] calling sock_init+0x0/0x5e @ 1 [ 0.050069] initcall sock_init+0x0/0x5e returned 0 after 976 usecs [ 0.050992] calling net_inuse_init+0x0/0x26 @ 1 [ 0.050992] initcall net_inuse_init+0x0/0x26 returned 0 after 0 usecs [ 0.050992] calling netpoll_init+0x0/0x31 @ 1 [ 0.050992] initcall netpoll_init+0x0/0x31 returned 0 after 0 usecs [ 0.050992] calling netlink_proto_init+0x0/0x143 @ 1 [ 0.050992] NET: Registered protocol family 16 [ 0.051006] initcall netlink_proto_init+0x0/0x143 returned 0 after 976 usecs [ 0.051992] calling bdi_class_init+0x0/0x41 @ 1 [ 0.052088] initcall bdi_class_init+0x0/0x41 returned 0 after 976 usecs [ 0.052991] calling kobject_uevent_init+0x0/0x54 @ 1 [ 0.053067] initcall kobject_uevent_init+0x0/0x54 returned 0 after 976 usecs [ 0.053991] calling pcibus_class_init+0x0/0x19 @ 1 [ 0.054056] initcall pcibus_class_init+0x0/0x19 returned 0 after 976 usecs [ 0.054991] calling pci_driver_init+0x0/0x12 @ 1 [ 0.055024] initcall pci_driver_init+0x0/0x12 returned 0 after 976 usecs [ 0.055991] calling backlight_class_init+0x0/0x5d @ 1 [ 0.056055] initcall backlight_class_init+0x0/0x5d returned 0 after 976 usecs [ 0.056991] calling video_output_class_init+0x0/0x19 @ 1 [ 0.057026] initcall video_output_class_init+0x0/0x19 returned 0 after 976 usecs [ 0.057991] calling xenbus_init+0x0/0x2b6 @ 1 [ 0.058006] alloc irq_desc for 755 on node -1 [ 0.058991] alloc kstat_irqs on node -1 [ 0.059046] initcall xenbus_init+0x0/0x2b6 returned 0 after 1952 usecs [ 0.059990] calling tty_class_init+0x0/0x38 @ 1 [ 0.060055] initcall tty_class_init+0x0/0x38 returned 0 after 976 usecs [ 0.060990] calling vtconsole_class_init+0x0/0xc2 @ 1 [ 0.061102] initcall vtconsole_class_init+0x0/0xc2 returned 0 after 976 usecs [ 0.061990] calling i2c_init+0x0/0x6a @ 1 [ 0.062054] initcall i2c_init+0x0/0x6a returned 0 after 976 usecs [ 0.062990] calling amd_postcore_init+0x0/0x77 @ 1 [ 0.062990] initcall amd_postcore_init+0x0/0x77 returned 0 after 0 usecs [ 0.062990] calling arch_kdebugfs_init+0x0/0x235 @ 1 [ 0.062990] initcall arch_kdebugfs_init+0x0/0x235 returned 0 after 0 usecs [ 0.062990] calling mtrr_if_init+0x0/0x61 @ 1 [ 0.062990] initcall mtrr_if_init+0x0/0x61 returned 0 after 0 usecs [ 0.062990] calling ffh_cstate_init+0x0/0x2a @ 1 [ 0.062990] initcall ffh_cstate_init+0x0/0x2a returned 0 after 0 usecs [ 0.062990] calling acpi_pci_init+0x0/0x57 @ 1 [ 0.062990] ACPI: bus type pci registered [ 0.062990] initcall acpi_pci_init+0x0/0x57 returned 0 after 0 usecs [ 0.062990] calling xen_pcpu_init+0x0/0xa8 @ 1 [ 0.063082] sync cpu 0 get result 1 max_id 1 [ 0.064057] sync cpu 1 get result 1 max_id 1 [ 0.064990] alloc irq_desc for 754 on node -1 [ 0.064990] alloc kstat_irqs on node -1 [ 0.065023] initcall xen_pcpu_init+0x0/0xa8 returned 754 after 2929 usecs [ 0.065989] initcall xen_pcpu_init+0x0/0xa8 returned with error code 754 [ 0.065989] calling register_xen_pci_notifier+0x0/0x24 @ 1 [ 0.065989] initcall register_xen_pci_notifier+0x0/0x24 returned 0 after 0 usecs [ 0.065989] calling setup_vcpu_hotplug_event+0x0/0x22 @ 1 [ 0.065989] initcall setup_vcpu_hotplug_event+0x0/0x22 returned 0 after 0 usecs [ 0.065989] calling dmi_id_init+0x0/0x319 @ 1 [ 0.066096] initcall dmi_id_init+0x0/0x319 returned 0 after 976 usecs [ 0.066989] calling pci_arch_init+0x0/0x60 @ 1 [ 0.067026] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 9 [ 0.067989] PCI: MCFG area at e0000000 reserved in E820 [ 0.069420] PCI: Using MMCONFIG at e0000000 - e09fffff [ 0.069989] PCI: Using configuration type 1 for base access [ 0.069989] initcall pci_arch_init+0x0/0x60 returned 0 after 2929 usecs [ 0.069989] calling topology_init+0x0/0x40 @ 1 [ 0.070081] initcall topology_init+0x0/0x40 returned 0 after 976 usecs [ 0.070989] calling mtrr_init_finialize+0x0/0x3d @ 1 [ 0.070989] initcall mtrr_init_finialize+0x0/0x3d returned 0 after 0 usecs [ 0.070989] calling param_sysfs_init+0x0/0x224 @ 1 [ 0.098100] initcall param_sysfs_init+0x0/0x224 returned 0 after 27339 usecs [ 0.098984] calling pm_sysrq_init+0x0/0x19 @ 1 [ 0.098984] initcall pm_sysrq_init+0x0/0x19 returned 0 after 0 usecs [ 0.098984] calling audit_watch_init+0x0/0x2f @ 1 [ 0.098984] initcall audit_watch_init+0x0/0x2f returned 0 after 0 usecs [ 0.098984] calling default_bdi_init+0x0/0xb2 @ 1 [ 0.099215] initcall default_bdi_init+0x0/0xb2 returned 0 after 976 usecs [ 0.099984] calling init_bio+0x0/0xda @ 1 [ 0.099984] bio: create slab at 0 [ 0.099984] initcall init_bio+0x0/0xda returned 0 after 0 usecs [ 0.099984] calling fsnotify_init+0x0/0x12 @ 1 [ 0.099984] initcall fsnotify_init+0x0/0x12 returned 0 after 0 usecs [ 0.099984] calling fsnotify_notification_init+0x0/0xf0 @ 1 [ 0.100051] initcall fsnotify_notification_init+0x0/0xf0 returned 0 after 976 usecs [ 0.100984] calling cryptomgr_init+0x0/0x12 @ 1 [ 0.100984] initcall cryptomgr_init+0x0/0x12 returned 0 after 0 usecs [ 0.100984] calling blk_settings_init+0x0/0x2a @ 1 [ 0.100984] initcall blk_settings_init+0x0/0x2a returned 0 after 0 usecs [ 0.100984] calling blk_ioc_init+0x0/0x2a @ 1 [ 0.100984] initcall blk_ioc_init+0x0/0x2a returned 0 after 0 usecs [ 0.100984] calling blk_softirq_init+0x0/0x6e @ 1 [ 0.100984] initcall blk_softirq_init+0x0/0x6e returned 0 after 0 usecs [ 0.100984] calling blk_iopoll_setup+0x0/0x6e @ 1 [ 0.100984] initcall blk_iopoll_setup+0x0/0x6e returned 0 after 0 usecs [ 0.100984] calling genhd_device_init+0x0/0x7b @ 1 [ 0.101206] initcall genhd_device_init+0x0/0x7b returned 0 after 976 usecs [ 0.101984] calling pci_slot_init+0x0/0x46 @ 1 [ 0.101984] initcall pci_slot_init+0x0/0x46 returned 0 after 0 usecs [ 0.101984] calling fbmem_init+0x0/0x98 @ 1 [ 0.102048] initcall fbmem_init+0x0/0x98 returned 0 after 976 usecs [ 0.102984] calling acpi_init+0x0/0x130 @ 1 [ 0.104125] ERROR: Unable to locate IOAPIC for GSI 9 [ 0.105016] ACPI: EC: Look up EC in DSDT [ 0.114319] ACPI: Interpreter enabled [ 0.114982] ACPI: (supports S0 S3 S4 S5) [ 0.114982] ACPI: Using IOAPIC for interrupt routing [ 0.137209] initcall acpi_init+0x0/0x130 returned 0 after 34174 usecs [ 0.137978] calling dock_init+0x0/0x8d @ 1 [ 0.137978] ACPI: No dock devices found. [ 0.137978] initcall dock_init+0x0/0x8d returned 0 after 0 usecs [ 0.137978] calling acpi_pci_root_init+0x0/0x28 @ 1 [ 0.139406] ACPI Warning for \_SB_.PCI0._OSC: Parameter count mismatch - ASL declared 5, ACPI requires 4 (20090903/nspredef-336) [ 0.139978] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.140480] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.140978] pci 0000:00:01.0: PME# disabled [ 0.141136] pci 0000:00:1a.0: reg 20 io port: [0x3000-0x301f] [ 0.141978] pci 0000:00:1a.1: reg 20 io port: [0x3020-0x303f] [ 0.141978] pci 0000:00:1a.7: reg 10 32bit mmio: [0xd2304000-0xd23043ff] [ 0.141978] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold [ 0.141978] pci 0000:00:1a.7: PME# disabled [ 0.141978] pci 0000:00:1b.0: reg 10 64bit mmio: [0xd2300000-0xd2303fff] [ 0.141978] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.141978] pci 0000:00:1b.0: PME# disabled [ 0.141978] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.141978] pci 0000:00:1c.0: PME# disabled [ 0.141978] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 0.141978] pci 0000:00:1c.4: PME# disabled [ 0.141978] pci 0000:00:1d.0: reg 20 io port: [0x3040-0x305f] [ 0.141978] pci 0000:00:1d.1: reg 20 io port: [0x3060-0x307f] [ 0.141978] pci 0000:00:1d.2: reg 20 io port: [0x3080-0x309f] [ 0.141978] pci 0000:00:1d.7: reg 10 32bit mmio: [0xd2304400-0xd23047ff] [ 0.141978] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.141978] pci 0000:00:1d.7: PME# disabled [ 0.141978] pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO [ 0.141978] pci 0000:00:1f.0: quirk: region 1180-11bf claimed by ICH6 GPIO [ 0.141978] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0500 (mask 007f) [ 0.141978] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 4 PIO at c800 (mask 00ff) [ 0.141978] pci 0000:00:1f.2: reg 10 io port: [0x00-0x07] [ 0.141978] pci 0000:00:1f.2: reg 14 io port: [0x00-0x03] [ 0.141978] pci 0000:00:1f.2: reg 18 io port: [0x00-0x07] [ 0.141978] pci 0000:00:1f.2: reg 1c io port: [0x00-0x03] [ 0.141978] pci 0000:00:1f.2: reg 20 io port: [0x30d0-0x30df] [ 0.141978] pci 0000:00:1f.2: reg 24 io port: [0x30c0-0x30cf] [ 0.141978] pci 0000:00:1f.2: PME# supported from D3hot [ 0.141978] pci 0000:00:1f.2: PME# disabled [ 0.141978] pci 0000:00:1f.3: reg 10 32bit mmio: [0xd2304800-0xd23048ff] [ 0.141978] pci 0000:00:1f.3: reg 20 io port: [0x30a0-0x30bf] [ 0.141978] pci 0000:00:1f.5: reg 10 io port: [0x3428-0x342f] [ 0.141978] pci 0000:00:1f.5: reg 14 io port: [0x341c-0x341f] [ 0.141978] pci 0000:00:1f.5: reg 18 io port: [0x3420-0x3427] [ 0.141978] pci 0000:00:1f.5: reg 1c io port: [0x3418-0x341b] [ 0.141978] pci 0000:00:1f.5: reg 20 io port: [0x30f0-0x30ff] [ 0.141978] pci 0000:00:1f.5: reg 24 io port: [0x30e0-0x30ef] [ 0.141978] pci 0000:00:1f.5: PME# supported from D3hot [ 0.141978] pci 0000:00:1f.5: PME# disabled [ 0.141978] pci 0000:01:00.0: reg 10 32bit mmio: [0xd1000000-0xd1ffffff] [ 0.141978] pci 0000:01:00.0: reg 14 64bit mmio pref: [0xc0000000-0xcfffffff] [ 0.141978] pci 0000:01:00.0: reg 1c 64bit mmio: [0xd0000000-0xd0ffffff] [ 0.141978] pci 0000:01:00.0: reg 30 32bit mmio pref: [0x000000-0x01ffff] [ 0.141978] pci 0000:00:01.0: bridge 32bit mmio: [0xd0000000-0xd1ffffff] [ 0.141978] pci 0000:00:01.0: bridge 64bit mmio pref: [0xc0000000-0xcfffffff] [ 0.141978] pci 0000:00:1c.0: bridge io port: [0x00-0xfff] [ 0.142145] pci 0000:03:00.0: reg 10 64bit mmio: [0xd2000000-0xd200ffff] [ 0.142978] pci 0000:03:00.0: PME# supported from D3hot D3cold [ 0.142978] pci 0000:03:00.0: PME# disabled [ 0.142978] pci 0000:00:1c.4: bridge 32bit mmio: [0xd2000000-0xd20fffff] [ 0.142978] pci 0000:00:1e.0: transparent bridge [ 0.142978] pci_bus 0000:00: on NUMA node 0 [ 0.142978] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.143498] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEG_._PRT] [ 0.143978] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT] [ 0.143978] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP5._PRT] [ 0.143978] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT] [ 0.143978] ACPI Warning for \_SB_.PCI0._OSC: Parameter count mismatch - ASL declared 5, ACPI requires 4 (20090903/nspredef-336) (XEN) PCI add device 00:00.0 (XEN) PCI add device 00:01.0 (XEN) PCI add device 00:1a.0 (XEN) PCI add device 00:1a.1 (XEN) PCI add device 00:1a.7 (XEN) PCI add device 00:1b.0 (XEN) PCI add device 00:1c.0 (XEN) PCI add device 00:1c.4 (XEN) PCI add device 00:1d.0 (XEN) PCI add device 00:1d.1 (XEN) PCI add device 00:1d.2 (XEN) PCI add device 00:1d.7 (XEN) PCI add device 00:1e.0 (XEN) PCI add device 00:1f.0 (XEN) PCI add device 00:1f.2 (XEN) PCI add device 00:1f.3 (XEN) PCI add device 00:1f.5 (XEN) PCI add device 01:00.0 (XEN) PCI add device 03:00.0 [ 0.171116] initcall acpi_pci_root_init+0x0/0x28 returned 0 after 33198 usecs [ 0.171973] calling acpi_pci_link_init+0x0/0x43 @ 1 [ 0.172183] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12) [ 0.172973] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 *9 10 11 12) [ 0.172973] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 *10 11 12) [ 0.172973] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 11 12) *0, disabled. [ 0.172973] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 11 12) *0, disabled. [ 0.172973] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11 12) *0, disabled. [ 0.172973] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 10 11 12) *0, disabled. [ 0.172973] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 10 11 12) *0, disabled. [ 0.173040] initcall acpi_pci_link_init+0x0/0x43 returned 0 after 1952 usecs [ 0.173973] calling pnp_init+0x0/0x12 @ 1 [ 0.174111] initcall pnp_init+0x0/0x12 returned 0 after 976 usecs [ 0.174973] calling __setup_shutdown_event+0x0/0x21 @ 1 [ 0.174973] initcall __setup_shutdown_event+0x0/0x21 returned 0 after 0 usecs [ 0.174973] calling xenbus_probe_backend_init+0x0/0x2d @ 1 [ 0.175012] initcall xenbus_probe_backend_init+0x0/0x2d returned 0 after 976 usecs [ 0.175973] calling xenbus_probe_frontend_init+0x0/0x2d @ 1 [ 0.176054] initcall xenbus_probe_frontend_init+0x0/0x2d returned 0 after 976 usecs [ 0.176973] calling balloon_init+0x0/0x268 @ 1 [ 0.176973] xen_balloon: Initialising balloon driver with page order 0. [ 0.177062] last_pfn = 0x1b3eb0 max_arch_pfn = 0x400000000 [ 0.194082] initcall balloon_init+0x0/0x268 returned 0 after 17575 usecs [ 0.194970] calling xen_acpi_processor_extcntl_init+0x0/0x4f @ 1 [ 0.194970] initcall xen_acpi_processor_extcntl_init+0x0/0x4f returned 0 after 0 usecs [ 0.194970] calling misc_init+0x0/0xb7 @ 1 [ 0.195097] initcall misc_init+0x0/0xb7 returned 0 after 976 usecs [ 0.195970] calling vga_arb_device_init+0x0/0x80 @ 1 [ 0.196060] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.196969] vgaarb: loaded [ 0.196969] initcall vga_arb_device_init+0x0/0x80 returned 0 after 976 usecs [ 0.196969] calling cn_init+0x0/0x9e @ 1 [ 0.197002] initcall cn_init+0x0/0x9e returned 0 after 976 usecs [ 0.197969] calling init_scsi+0x0/0x91 @ 1 [ 0.198081] SCSI subsystem initialized [ 0.198969] initcall init_scsi+0x0/0x91 returned 0 after 976 usecs [ 0.198969] calling ata_init+0x0/0x351 @ 1 [ 0.199025] libata version 3.00 loaded. [ 0.199969] initcall ata_init+0x0/0x351 returned 0 after 976 usecs [ 0.199969] calling phy_init+0x0/0x2e @ 1 [ 0.200080] initcall phy_init+0x0/0x2e returned 0 after 976 usecs [ 0.200969] calling init_pcmcia_cs+0x0/0x36 @ 1 [ 0.201033] initcall init_pcmcia_cs+0x0/0x36 returned 0 after 976 usecs [ 0.201969] calling usb_init+0x0/0x1a9 @ 1 [ 0.202100] usbcore: registered new interface driver usbfs [ 0.203030] usbcore: registered new interface driver hub [ 0.204039] usbcore: registered new device driver usb [ 0.204968] initcall usb_init+0x0/0x1a9 returned 0 after 2929 usecs [ 0.204968] calling serio_init+0x0/0x86 @ 1 [ 0.205077] initcall serio_init+0x0/0x86 returned 0 after 976 usecs [ 0.205968] calling input_init+0x0/0x13c @ 1 [ 0.206051] initcall input_init+0x0/0x13c returned 0 after 976 usecs [ 0.206968] calling rtc_init+0x0/0x71 @ 1 [ 0.207030] initcall rtc_init+0x0/0x71 returned 0 after 976 usecs [ 0.207968] calling power_supply_class_init+0x0/0x38 @ 1 [ 0.207995] initcall power_supply_class_init+0x0/0x38 returned 0 after 976 usecs [ 0.208968] calling hwmon_init+0x0/0x106 @ 1 [ 0.209006] initcall hwmon_init+0x0/0x106 returned 0 after 976 usecs [ 0.209967] calling thermal_init+0x0/0x3f @ 1 [ 0.210031] initcall thermal_init+0x0/0x3f returned 0 after 976 usecs [ 0.210967] calling md_init+0x0/0xd0 @ 1 [ 0.210967] initcall md_init+0x0/0xd0 returned 0 after 0 usecs [ 0.210967] calling leds_init+0x0/0x40 @ 1 [ 0.211033] initcall leds_init+0x0/0x40 returned 0 after 976 usecs [ 0.211967] calling pci_subsys_init+0x0/0x107 @ 1 [ 0.211967] PCI: Using ACPI for IRQ routing [ 0.211967] pci 0000:00:1c.0: BAR 7: can't allocate resource [ 0.211967] initcall pci_subsys_init+0x0/0x107 returned 0 after 0 usecs [ 0.211967] calling proto_init+0x0/0x12 @ 1 [ 0.211967] initcall proto_init+0x0/0x12 returned 0 after 0 usecs [ 0.211967] calling net_dev_init+0x0/0x175 @ 1 [ 0.212171] initcall net_dev_init+0x0/0x175 returned 0 after 976 usecs [ 0.212967] calling neigh_init+0x0/0x71 @ 1 [ 0.212967] initcall neigh_init+0x0/0x71 returned 0 after 0 usecs [ 0.212967] calling fib_rules_init+0x0/0xa6 @ 1 [ 0.212967] initcall fib_rules_init+0x0/0xa6 returned 0 after 0 usecs [ 0.212967] calling pktsched_init+0x0/0xd0 @ 1 [ 0.212967] initcall pktsched_init+0x0/0xd0 returned 0 after 0 usecs [ 0.212967] calling tc_filter_init+0x0/0x4c @ 1 [ 0.212967] initcall tc_filter_init+0x0/0x4c returned 0 after 0 usecs [ 0.212967] calling tc_action_init+0x0/0x4c @ 1 [ 0.212967] initcall tc_action_init+0x0/0x4c returned 0 after 0 usecs [ 0.212967] calling genl_init+0x0/0x8f @ 1 [ 0.212999] initcall genl_init+0x0/0x8f returned 0 after 976 usecs [ 0.213967] calling cipso_v4_init+0x0/0x61 @ 1 [ 0.213967] initcall cipso_v4_init+0x0/0x61 returned 0 after 0 usecs [ 0.213967] calling wireless_nlevent_init+0x0/0x12 @ 1 [ 0.213967] initcall wireless_nlevent_init+0x0/0x12 returned 0 after 0 usecs [ 0.213967] calling cfg80211_init+0x0/0x92 @ 1 [ 0.214122] cfg80211: Using static regulatory domain info [ 0.214967] cfg80211: Regulatory domain: US [ 0.214967] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 0.214967] (2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm) [ 0.214967] (5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) [ 0.214967] (5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) [ 0.214967] (5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) [ 0.214967] (5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) [ 0.214967] (5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm) [ 0.215008] cfg80211: Calling CRDA for country: US [ 0.216044] initcall cfg80211_init+0x0/0x92 returned 0 after 2929 usecs [ 0.216966] calling ieee80211_init+0x0/0xb @ 1 [ 0.216966] initcall ieee80211_init+0x0/0xb returned 0 after 0 usecs [ 0.216966] calling netlbl_init+0x0/0x81 @ 1 [ 0.216966] NetLabel: Initializing [ 0.216966] NetLabel: domain hash size = 128 [ 0.216966] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.216966] NetLabel: unlabeled traffic allowed by default [ 0.216966] initcall netlbl_init+0x0/0x81 returned 0 after 0 usecs [ 0.216966] calling rfkill_init+0x0/0x79 @ 1 [ 0.217033] initcall rfkill_init+0x0/0x79 returned 0 after 976 usecs [ 0.217966] calling sysctl_init+0x0/0x48 @ 1 [ 0.217966] initcall sysctl_init+0x0/0x48 returned 0 after 0 usecs [ 0.217966] calling xen_mc_debugfs+0x0/0x118 @ 1 [ 0.217966] initcall xen_mc_debugfs+0x0/0x118 returned 0 after 0 usecs [ 0.217966] calling xen_mmu_debugfs+0x0/0x2be @ 1 [ 0.218133] initcall xen_mmu_debugfs+0x0/0x2be returned 0 after 976 usecs [ 0.218966] calling xen_spinlock_debugfs+0x0/0x24e @ 1 [ 0.219062] initcall xen_spinlock_debugfs+0x0/0x24e returned 0 after 976 usecs [ 0.219966] calling print_all_ICs+0x0/0x51b @ 1 [ 0.219977] initcall print_all_ICs+0x0/0x51b returned 0 after 976 usecs [ 0.220966] calling hpet_late_init+0x0/0xc5 @ 1 [ 0.220966] initcall hpet_late_init+0x0/0xc5 returned -19 after 0 usecs [ 0.220966] calling init_k8_nbs+0x0/0x28 @ 1 [ 0.220966] initcall init_k8_nbs+0x0/0x28 returned 0 after 0 usecs [ 0.220966] calling clocksource_done_booting+0x0/0x5a @ 1 [ 0.220966] Switching to clocksource xen [ 0.221083] initcall clocksource_done_booting+0x0/0x5a returned 0 after 1067 usecs [ 0.222021] calling rb_init_debugfs+0x0/0x2f @ 1 [ 0.234285] initcall rb_init_debugfs+0x0/0x2f returned 0 after 54 usecs [ 0.235234] calling tracer_init_debugfs+0x0/0x2d1 @ 1 [ 0.247061] initcall tracer_init_debugfs+0x0/0x2d1 returned 0 after 350 usecs [ 0.247781] calling init_trace_printk_function_export+0x0/0x2f @ 1 [ 0.247781] initcall init_trace_printk_function_export+0x0/0x2f returned 0 after 8 usecs [ 0.247781] calling event_trace_init+0x0/0x1f7 @ 1 [ 0.281995] initcall event_trace_init+0x0/0x1f7 returned 0 after 6779 usecs [ 0.282304] calling init_pipe_fs+0x0/0x4c @ 1 [ 0.282304] initcall init_pipe_fs+0x0/0x4c returned 0 after 23 usecs [ 0.282304] calling eventpoll_init+0x0/0xba @ 1 [ 0.282304] initcall eventpoll_init+0x0/0xba returned 0 after 6 usecs [ 0.282304] calling anon_inode_init+0x0/0x125 @ 1 [ 0.282304] initcall anon_inode_init+0x0/0x125 returned 0 after 16 usecs [ 0.282304] calling blk_scsi_ioctl_init+0x0/0x289 @ 1 [ 0.282304] initcall blk_scsi_ioctl_init+0x0/0x289 returned 0 after 0 usecs [ 0.282304] calling acpi_event_init+0x0/0x81 @ 1 [ 0.342830] initcall acpi_event_init+0x0/0x81 returned 0 after 32 usecs [ 0.343806] calling pnpacpi_init+0x0/0x8c @ 1 [ 0.343806] pnp: PnP ACPI init [ 0.357878] ACPI: bus type pnp registered [ 0.364882] xen: registering gsi 1 triggering 1 polarity 0 [ 0.365348] xen_allocate_pirq: returning irq 1 for gsi 1 [ 0.365348] xen: --> irq=1 (XEN) IOAPIC[0]: Set PCI routing entry (2-1 -> 0x28 -> IRQ 1 Mode:0 Active:0) [ 0.386001] xen: registering gsi 12 triggering 1 polarity 0 [ 0.386990] xen_allocate_pirq: returning irq 12 for gsi 12 [ 0.386990] xen: --> irq=12 (XEN) IOAPIC[0]: Set PCI routing entry (2-12 -> 0x70 -> IRQ 12 Mode:0 Active:0) [ 0.408401] xen: registering gsi 13 triggering 1 polarity 0 [ 0.409346] xen_allocate_pirq: returning irq 13 for gsi 13 [ 0.409346] xen: --> irq=13 (XEN) IOAPIC[0]: Set PCI routing entry (2-13 -> 0x78 -> IRQ 13 Mode:0 Active:0) [ 0.430441] xen: registering gsi 8 triggering 1 polarity 0 [ 0.431304] xen_allocate_pirq: returning irq 8 for gsi 8 [ 0.431304] xen: --> irq=8 (XEN) IOAPIC[0]: Set PCI routing entry (2-8 -> 0x50 -> IRQ 8 Mode:0 Active:0) [ 0.453452] xen: registering gsi 4 triggering 1 polarity 0 [ 0.454305] xen_allocate_pirq: returning irq 4 for gsi 4 [ 0.454305] xen: --> irq=4 [ 0.467857] Already setup the GSI :4 [ 0.472925] xen: registering gsi 6 triggering 1 polarity 0 [ 0.473305] xen_allocate_pirq: returning irq 6 for gsi 6 [ 0.473305] xen: --> irq=6 (XEN) IOAPIC[0]: Set PCI routing entry (2-6 -> 0x40 -> IRQ 6 Mode:0 Active:0) [ 0.495642] xen: registering gsi 7 triggering 1 polarity 0 [ 0.496305] xen_allocate_pirq: returning irq 7 for gsi 7 [ 0.496305] xen: --> irq=7 (XEN) IOAPIC[0]: Set PCI routing entry (2-7 -> 0x48 -> IRQ 7 Mode:0 Active:0) [ 0.518393] pnp: PnP ACPI: found 11 devices [ 0.518865] ACPI: ACPI bus type pnp unregistered [ 0.518865] initcall pnpacpi_init+0x0/0x8c returned 0 after 169191 usecs [ 0.518865] calling pnp_system_init+0x0/0x12 @ 1 [ 0.518865] system 00:01: ioport range 0x4d0-0x4d1 has been reserved [ 0.518865] system 00:01: ioport range 0x500-0x57f has been reserved [ 0.518865] system 00:01: ioport range 0x800-0x80f has been reserved [ 0.518865] system 00:01: ioport range 0x1000-0x107f has been reserved [ 0.518865] system 00:01: ioport range 0x1180-0x11bf has been reserved [ 0.518865] system 00:01: ioport range 0xc800-0xc87f has been reserved [ 0.518865] system 00:01: ioport range 0xc880-0xc8ff has been reserved [ 0.518865] system 00:01: ioport range 0xfe00-0xfe00 has been reserved [ 0.518865] system 00:01: iomem range 0xfed14000-0xfed17fff has been reserved [ 0.518865] system 00:01: iomem range 0xe0000000-0xefffffff has been reserved [ 0.518865] system 00:01: iomem range 0xfed20000-0xfed3ffff has been reserved [ 0.518865] system 00:01: iomem range 0xfed50000-0xfed8ffff has been reserved [ 0.518865] system 00:01: iomem range 0xfef00000-0xfeffffff has been reserved [ 0.637697] initcall pnp_system_init+0x0/0x12 returned 0 after 95556 usecs [ 0.638672] calling pcistub_init+0x0/0x1d7 @ 1 [ 0.650225] initcall pcistub_init+0x0/0x1d7 returned 0 after 453 usecs [ 0.651182] calling chr_dev_init+0x0/0xc3 @ 1 [ 0.663288] initcall chr_dev_init+0x0/0xc3 returned 0 after 1410 usecs [ 0.664262] calling firmware_class_init+0x0/0x79 @ 1 [ 0.675649] initcall firmware_class_init+0x0/0x79 returned 0 after 118 usecs [ 0.676622] calling init_pcmcia_bus+0x0/0x74 @ 1 [ 0.688225] initcall init_pcmcia_bus+0x0/0x74 returned 0 after 152 usecs [ 0.689171] calling cpufreq_gov_performance_init+0x0/0x12 @ 1 [ 0.689171] initcall cpufreq_gov_performance_init+0x0/0x12 returned 0 after 1 usecs [ 0.689171] calling cpufreq_gov_userspace_init+0x0/0x12 @ 1 [ 0.689171] initcall cpufreq_gov_userspace_init+0x0/0x12 returned 0 after 0 usecs [ 0.689171] calling init_acpi_pm_clocksource+0x0/0xf6 @ 1 [ 0.736428] PM-Timer failed consistency check (0x0xffffff) - aborting. [ 0.737303] initcall init_acpi_pm_clocksource+0x0/0xf6 returned -19 after 13531 usecs [ 0.737303] calling pcibios_assign_resources+0x0/0x74 @ 1 [ 0.737303] pci 0000:01:00.0: BAR 6: can't allocate mem resource [0xd0000000-0xcfffffff] [ 0.737303] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 [ 0.737303] pci 0000:00:01.0: IO window: disabled [ 0.737303] pci 0000:00:01.0: MEM window: 0xd0000000-0xd1ffffff [ 0.737303] pci 0000:00:01.0: PREFETCH window: 0x000000c0000000-0x000000cfffffff [ 0.737303] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02 [ 0.737303] pci 0000:00:1c.0: IO window: 0x2000-0x2fff [ 0.737303] pci 0000:00:1c.0: MEM window: 0x40000000-0x401fffff [ 0.737303] pci 0000:00:1c.0: PREFETCH window: 0x00000040200000-0x000000403fffff [ 0.737303] pci 0000:00:1c.4: PCI bridge, secondary bus 0000:03 [ 0.737303] pci 0000:00:1c.4: IO window: 0x4000-0x4fff [ 0.737303] pci 0000:00:1c.4: MEM window: 0xd2000000-0xd20fffff [ 0.737303] pci 0000:00:1c.4: PREFETCH window: 0x00000040400000-0x000000405fffff [ 0.737303] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:0a [ 0.737303] pci 0000:00:1e.0: IO window: disabled [ 0.737303] pci 0000:00:1e.0: MEM window: disabled [ 0.737303] pci 0000:00:1e.0: PREFETCH window: disabled [ 0.737303] xen: registering gsi 16 triggering 0 polarity 1 [ 0.737303] alloc irq_desc for 16 on node 0 [ 0.737303] alloc kstat_irqs on node 0 [ 0.882949] xen: --> irq=16 (XEN) IOAPIC[0]: Set PCI routing entry (2-16 -> 0x98 -> IRQ 16 Mode:1 Active:1) [ 0.892886] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.893876] pci 0000:00:01.0: setting latency timer to 64 [ 0.893876] pci 0000:00:1c.0: enabling device (0000 -> 0003) [ 0.893876] xen: registering gsi 16 triggering 0 polarity 1 [ 0.893876] xen_allocate_pirq: returning irq 16 for gsi 16 [ 0.893876] xen: --> irq=16 [ 0.926579] Already setup the GSI :16 [ 0.927569] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.927569] pci 0000:00:1c.0: setting latency timer to 64 [ 0.927569] xen: registering gsi 16 triggering 0 polarity 1 [ 0.927569] xen_allocate_pirq: returning irq 16 for gsi 16 [ 0.927569] xen: --> irq=16 [ 0.958073] Already setup the GSI :16 [ 0.959062] pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.959062] pci 0000:00:1c.4: setting latency timer to 64 [ 0.959062] pci 0000:00:1e.0: setting latency timer to 64 [ 0.959062] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.959062] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff] [ 0.959062] pci_bus 0000:01: resource 1 mem: [0xd0000000-0xd1ffffff] [ 0.959062] pci_bus 0000:01: resource 2 pref mem [0xc0000000-0xcfffffff] [ 0.959062] pci_bus 0000:02: resource 0 io: [0x2000-0x2fff] [ 0.959062] pci_bus 0000:02: resource 1 mem: [0x40000000-0x401fffff] [ 0.959062] pci_bus 0000:02: resource 2 pref mem [0x40200000-0x403fffff] [ 0.959062] pci_bus 0000:03: resource 0 io: [0x4000-0x4fff] [ 0.959062] pci_bus 0000:03: resource 1 mem: [0xd2000000-0xd20fffff] [ 0.959062] pci_bus 0000:03: resource 2 pref mem [0x40400000-0x405fffff] [ 0.959062] pci_bus 0000:0a: resource 3 io: [0x00-0xffff] [ 0.959062] pci_bus 0000:0a: resource 4 mem: [0x000000-0xffffffffffffffff] [ 0.959062] initcall pcibios_assign_resources+0x0/0x74 returned 0 after 295091 usecs [ 0.959062] calling sysctl_core_init+0x0/0x38 @ 1 [ 0.959062] initcall sysctl_core_init+0x0/0x38 returned 0 after 75 usecs [ 0.959062] calling inet_init+0x0/0x20a @ 1 [ 0.959062] NET: Registered protocol family 2 [ 1.090136] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 1.099394] TCP established hash table entries: 262144 (order: 10, 4194304 bytes) [ 1.109774] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 1.110308] TCP: Hash tables configured (established 262144 bind 65536) [ 1.110308] TCP reno registered [ 1.110308] initcall inet_init+0x0/0x20a returned 0 after 41903 usecs [ 1.110308] calling af_unix_init+0x0/0x55 @ 1 [ 1.110308] NET: Registered protocol family 1 [ 1.110308] initcall af_unix_init+0x0/0x55 returned 0 after 4578 usecs [ 1.110308] calling init_sunrpc+0x0/0x5d @ 1 [ 1.156241] RPC: Registered udp transport module. [ 1.158063] RPC: Registered tcp transport module. [ 1.166063] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.173200] initcall init_sunrpc+0x0/0x5d returned 0 after 16976 usecs [ 1.174058] calling pci_apply_final_quirks+0x0/0x36 @ 1 [ 1.174058] pci 0000:00:1a.0: uhci_check_and_reset_hc: legsup = 0x003b [ 1.174058] pci 0000:00:1a.0: Performing full reset [ 1.197881] pci 0000:00:1a.1: uhci_check_and_reset_hc: legsup = 0x0010 [ 1.198823] pci 0000:00:1a.1: Performing full reset [ 1.210073] pci 0000:00:1d.0: uhci_check_and_reset_hc: legsup = 0x003b [ 1.210953] pci 0000:00:1d.0: Performing full reset [ 1.222182] pci 0000:00:1d.1: uhci_check_and_reset_hc: legsup = 0x0010 [ 1.223144] pci 0000:00:1d.1: Performing full reset [ 1.234320] pci 0000:00:1d.2: uhci_check_and_reset_hc: legsup = 0x0010 [ 1.235252] pci 0000:00:1d.2: Performing full reset [ 1.246520] pci 0000:01:00.0: Boot video device [ 1.247389] initcall pci_apply_final_quirks+0x0/0x36 returned 0 after 64098 usecs [ 1.247389] calling populate_rootfs+0x0/0xd7 @ 1 [ 1.264548] Trying to unpack rootfs image as initramfs... [ 1.287342] Freeing initrd memory: 7735k freed [ 1.288055] initcall populate_rootfs+0x0/0xd7 returned 0 after 30737 usecs [ 1.288055] calling pci_iommu_init+0x0/0x3a @ 1 [ 1.288055] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 1.288055] DMA: Placing 64MB software IO TLB between ffff880020000000 - ffff880024000000 [ 1.288055] DMA: software IO TLB at phys 0x20000000 - 0x24000000 [ 1.288055] initcall pci_iommu_init+0x0/0x3a returned 0 after 21393 usecs [ 1.288055] calling irqfd_module_init+0x0/0x31 @ 1 [ 1.342604] initcall irqfd_module_init+0x0/0x31 returned 0 after 286 usecs [ 1.343580] calling vmx_init+0x0/0x1ff @ 1 [ 1.354414] kvm: no hardware support [ 1.355330] initcall vmx_init+0x0/0x1ff returned -95 after 3857 usecs [ 1.355330] initcall vmx_init+0x0/0x1ff returned with error code -95 [ 1.355330] calling svm_init+0x0/0x19 @ 1 [ 1.355330] has_svm: not amd [ 1.355330] kvm: no hardware support [ 1.355330] initcall svm_init+0x0/0x19 returned -95 after 6813 usecs [ 1.355330] initcall svm_init+0x0/0x19 returned with error code -95 [ 1.355330] calling i8259A_init_sysfs+0x0/0x22 @ 1 [ 1.402148] initcall i8259A_init_sysfs+0x0/0x22 returned 0 after 365 usecs [ 1.403133] calling vsyscall_init+0x0/0x6c @ 1 [ 1.414271] initcall vsyscall_init+0x0/0x6c returned 0 after 56 usecs [ 1.415250] calling sbf_init+0x0/0xe9 @ 1 [ 1.415250] Simple Boot Flag at 0x44 set to 0x1 [ 1.415250] initcall sbf_init+0x0/0xe9 returned 0 after 4720 usecs [ 1.415250] calling i8237A_init_sysfs+0x0/0x22 @ 1 [ 1.442221] initcall i8237A_init_sysfs+0x0/0x22 returned 0 after 238 usecs [ 1.443207] calling add_rtc_cmos+0x0/0xa9 @ 1 [ 1.443207] initcall add_rtc_cmos+0x0/0xa9 returned 0 after 3 usecs [ 1.443207] calling cache_sysfs_init+0x0/0x64 @ 1 [ 1.467027] initcall cache_sysfs_init+0x0/0x64 returned 0 after 1096 usecs [ 1.468011] calling mce_init_device+0x0/0xff @ 1 [ 1.479837] initcall mce_init_device+0x0/0xff returned 0 after 552 usecs [ 1.480770] calling msr_init+0x0/0x14a @ 1 [ 1.491781] initcall msr_init+0x0/0x14a returned 0 after 407 usecs [ 1.492715] calling cpuid_init+0x0/0x14a @ 1 [ 1.503371] initcall cpuid_init+0x0/0x14a returned 0 after 407 usecs [ 1.504357] calling ioapic_init_sysfs+0x0/0xb3 @ 1 [ 1.515507] initcall ioapic_init_sysfs+0x0/0xb3 returned 0 after 241 usecs [ 1.516440] calling add_pcspkr+0x0/0x28 @ 1 [ 1.527437] initcall add_pcspkr+0x0/0x28 returned 0 after 130 usecs [ 1.528419] calling microcode_init+0x0/0x132 @ 1 [ 1.539357] Microcode Update Driver: v2.00 , Peter Oruba [ 1.540344] initcall microcode_init+0x0/0x132 returned 0 after 8524 usecs [ 1.540344] calling start_periodic_check_for_corruption+0x0/0x37 @ 1 [ 1.540344] Scanning for low memory corruption every 60 seconds [ 1.540344] initcall start_periodic_check_for_corruption+0x0/0x37 returned 0 after 6111 usecs [ 1.540344] calling audit_classes_init+0x0/0xaf @ 1 [ 1.582436] initcall audit_classes_init+0x0/0xaf returned 0 after 54 usecs [ 1.583384] calling init_vdso_vars+0x0/0x241 @ 1 [ 1.594726] initcall init_vdso_vars+0x0/0x241 returned 0 after 48 usecs [ 1.595696] calling ia32_binfmt_init+0x0/0x14 @ 1 [ 1.595696] initcall ia32_binfmt_init+0x0/0x14 returned 0 after 32 usecs [ 1.595696] calling sysenter_setup+0x0/0x2f1 @ 1 [ 1.595696] initcall sysenter_setup+0x0/0x2f1 returned 0 after 4 usecs [ 1.595696] calling proc_schedstat_init+0x0/0x22 @ 1 [ 1.595696] initcall proc_schedstat_init+0x0/0x22 returned 0 after 8 usecs [ 1.595696] calling proc_execdomains_init+0x0/0x22 @ 1 [ 1.595696] initcall proc_execdomains_init+0x0/0x22 returned 0 after 4 usecs [ 1.595696] calling ioresources_init+0x0/0x3c @ 1 [ 1.595696] initcall ioresources_init+0x0/0x3c returned 0 after 9 usecs [ 1.595696] calling uid_cache_init+0x0/0xb1 @ 1 [ 1.668335] initcall uid_cache_init+0x0/0xb1 returned 0 after 26 usecs [ 1.669320] calling init_posix_timers+0x0/0x17a @ 1 [ 1.669320] initcall init_posix_timers+0x0/0x17a returned 0 after 2 usecs [ 1.669320] calling init_posix_cpu_timers+0x0/0xe5 @ 1 [ 1.669320] initcall init_posix_cpu_timers+0x0/0xe5 returned 0 after 0 usecs [ 1.669320] calling nsproxy_cache_init+0x0/0x2d @ 1 [ 1.669320] initcall nsproxy_cache_init+0x0/0x2d returned 0 after 0 usecs [ 1.669320] calling create_proc_profile+0x0/0x283 @ 1 [ 1.669320] initcall create_proc_profile+0x0/0x283 returned 0 after 0 usecs [ 1.669320] calling timekeeping_init_device+0x0/0x22 @ 1 [ 1.737080] initcall timekeeping_init_device+0x0/0x22 returned 0 after 236 usecs [ 1.738063] calling init_clocksource_sysfs+0x0/0x50 @ 1 [ 1.750912] initcall init_clocksource_sysfs+0x0/0x50 returned 0 after 225 usecs [ 1.751844] calling init_timer_list_procfs+0x0/0x2c @ 1 [ 1.751844] initcall init_timer_list_procfs+0x0/0x2c returned 0 after 4 usecs [ 1.751844] calling init_tstats_procfs+0x0/0x2c @ 1 [ 1.751844] initcall init_tstats_procfs+0x0/0x2c returned 0 after 4 usecs [ 1.751844] calling futex_init+0x0/0x68 @ 1 [ 1.788960] initcall futex_init+0x0/0x68 returned 0 after 48 usecs [ 1.789914] calling proc_dma_init+0x0/0x22 @ 1 [ 1.800349] initcall proc_dma_init+0x0/0x22 returned 0 after 42 usecs [ 1.801312] calling proc_modules_init+0x0/0x22 @ 1 [ 1.801312] initcall proc_modules_init+0x0/0x22 returned 0 after 4 usecs [ 1.801312] calling kallsyms_init+0x0/0x25 @ 1 [ 1.801312] initcall kallsyms_init+0x0/0x25 returned 0 after 4 usecs [ 1.801312] calling snapshot_device_init+0x0/0x12 @ 1 [ 1.836496] initcall snapshot_device_init+0x0/0x12 returned 0 after 134 usecs [ 1.837429] calling crash_save_vmcoreinfo_init+0x0/0x4a5 @ 1 [ 1.837429] initcall crash_save_vmcoreinfo_init+0x0/0x4a5 returned 0 after 25 usecs [ 1.837429] calling crash_notes_memory_init+0x0/0x37 @ 1 [ 1.837429] initcall crash_notes_memory_init+0x0/0x37 returned 0 after 2 usecs [ 1.837429] calling pid_namespaces_init+0x0/0x2d @ 1 [ 1.837429] initcall pid_namespaces_init+0x0/0x2d returned 0 after 3 usecs [ 1.837429] calling audit_init+0x0/0x133 @ 1 [ 1.837429] audit: initializing netlink socket (disabled) [ 1.894854] type=2000 audit(1305674330.317:1): initialized [ 1.895825] initcall audit_init+0x0/0x133 returned 0 after 11295 usecs [ 1.895825] calling audit_tree_init+0x0/0x49 @ 1 [ 1.895825] initcall audit_tree_init+0x0/0x49 returned 0 after 1 usecs [ 1.895825] calling init_kprobes+0x0/0x148 @ 1 [ 1.935037] initcall init_kprobes+0x0/0x148 returned 0 after 10518 usecs [ 1.935055] calling utsname_sysctl_init+0x0/0x14 @ 1 [ 1.947563] initcall utsname_sysctl_init+0x0/0x14 returned 0 after 104 usecs [ 1.948460] calling init_tracepoints+0x0/0x12 @ 1 [ 1.948460] initcall init_tracepoints+0x0/0x12 returned 0 after 0 usecs [ 1.948460] calling init_events+0x0/0x64 @ 1 [ 1.948460] initcall init_events+0x0/0x64 returned 0 after 2 usecs [ 1.948460] calling init_sched_switch_trace+0x0/0x12 @ 1 [ 1.948460] initcall init_sched_switch_trace+0x0/0x12 returned 0 after 1 usecs [ 1.948460] calling init_blk_tracer+0x0/0x55 @ 1 [ 1.948460] initcall init_blk_tracer+0x0/0x55 returned 0 after 1 usecs [ 1.948460] calling perf_event_sysfs_init+0x0/0x19 @ 1 [ 1.948460] initcall perf_event_sysfs_init+0x0/0x19 returned 0 after 9 usecs [ 1.948460] calling init_per_zone_wmark_min+0x0/0x67 @ 1 [ 1.948460] initcall init_per_zone_wmark_min+0x0/0x67 returned 0 after 213 usecs [ 1.948460] calling kswapd_init+0x0/0x20 @ 1 [ 2.035235] initcall kswapd_init+0x0/0x20 returned 0 after 124 usecs [ 2.036207] calling setup_vmstat+0x0/0xc5 @ 1 [ 2.036207] initcall setup_vmstat+0x0/0xc5 returned 0 after 24 usecs [ 2.036207] calling mm_sysfs_init+0x0/0x29 @ 1 [ 2.036207] initcall mm_sysfs_init+0x0/0x29 returned 0 after 5 usecs [ 2.036207] calling proc_vmalloc_init+0x0/0x25 @ 1 [ 2.036207] initcall proc_vmalloc_init+0x0/0x25 returned 0 after 4 usecs [ 2.036207] calling procswaps_init+0x0/0x22 @ 1 [ 2.036207] initcall procswaps_init+0x0/0x22 returned 0 after 4 usecs [ 2.036207] calling hugetlb_init+0x0/0x3b0 @ 1 [ 2.036207] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 2.036207] initcall hugetlb_init+0x0/0x3b0 returned 0 after 6557 usecs [ 2.036207] calling slab_proc_init+0x0/0x25 @ 1 [ 2.036207] initcall slab_proc_init+0x0/0x25 returned 0 after 6 usecs [ 2.036207] calling slab_sysfs_init+0x0/0xee @ 1 [ 2.133347] initcall slab_sysfs_init+0x0/0xee returned 0 after 9021 usecs [ 2.134056] calling fasync_init+0x0/0x2a @ 1 [ 2.134056] initcall fasync_init+0x0/0x2a returned 0 after 7 usecs [ 2.134056] calling proc_filesystems_init+0x0/0x22 @ 1 [ 2.134056] initcall proc_filesystems_init+0x0/0x22 returned 0 after 5 usecs [ 2.134056] calling dnotify_init+0x0/0x80 @ 1 [ 2.134056] initcall dnotify_init+0x0/0x80 returned 0 after 13 usecs [ 2.134056] calling inotify_setup+0x0/0x12 @ 1 [ 2.134056] initcall inotify_setup+0x0/0x12 returned 0 after 0 usecs [ 2.134056] calling inotify_user_setup+0x0/0xbe @ 1 [ 2.193025] initcall inotify_user_setup+0x0/0xbe returned 0 after 136 usecs [ 2.193902] calling aio_setup+0x0/0x71 @ 1 [ 2.205050] initcall aio_setup+0x0/0x71 returned 0 after 227 usecs [ 2.206028] calling proc_locks_init+0x0/0x22 @ 1 [ 2.206028] initcall proc_locks_init+0x0/0x22 returned 0 after 5 usecs [ 2.206028] calling init_sys32_ioctl+0x0/0x83 @ 1 [ 2.206028] initcall init_sys32_ioctl+0x0/0x83 returned 0 after 13 usecs [ 2.206028] calling init_mbcache+0x0/0x14 @ 1 [ 2.206028] initcall init_mbcache+0x0/0x14 returned 0 after 0 usecs [ 2.206028] calling dquot_init+0x0/0xf9 @ 1 [ 2.206028] VFS: Disk quotas dquot_6.5.2 [ 2.256133] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 2.257057] initcall dquot_init+0x0/0xf9 returned 0 after 11129 usecs [ 2.257057] calling init_v2_quota_format+0x0/0x12 @ 1 [ 2.257057] initcall init_v2_quota_format+0x0/0x12 returned 0 after 0 usecs [ 2.257057] calling proc_cmdline_init+0x0/0x22 @ 1 [ 2.257057] initcall proc_cmdline_init+0x0/0x22 returned 0 after 5 usecs [ 2.257057] calling proc_cpuinfo_init+0x0/0x22 @ 1 [ 2.257057] initcall proc_cpuinfo_init+0x0/0x22 returned 0 after 4 usecs [ 2.257057] calling proc_devices_init+0x0/0x22 @ 1 [ 2.257057] initcall proc_devices_init+0x0/0x22 returned 0 after 4 usecs [ 2.257057] calling proc_interrupts_init+0x0/0x22 @ 1 [ 2.257057] initcall proc_interrupts_init+0x0/0x22 returned 0 after 4 usecs [ 2.257057] calling proc_loadavg_init+0x0/0x22 @ 1 [ 2.257057] initcall proc_loadavg_init+0x0/0x22 returned 0 after 4 usecs [ 2.257057] calling proc_meminfo_init+0x0/0x22 @ 1 [ 2.257057] initcall proc_meminfo_init+0x0/0x22 returned 0 after 4 usecs [ 2.257057] calling proc_stat_init+0x0/0x22 @ 1 [ 2.257057] initcall proc_stat_init+0x0/0x22 returned 0 after 4 usecs [ 2.257057] calling proc_uptime_init+0x0/0x22 @ 1 [ 2.257057] initcall proc_uptime_init+0x0/0x22 returned 0 after 4 usecs [ 2.257057] calling proc_version_init+0x0/0x22 @ 1 [ 2.257057] initcall proc_version_init+0x0/0x22 returned 0 after 4 usecs [ 2.257057] calling proc_softirqs_init+0x0/0x22 @ 1 [ 2.257057] initcall proc_softirqs_init+0x0/0x22 returned 0 after 4 usecs [ 2.257057] calling proc_kcore_init+0x0/0xb5 @ 1 [ 2.257057] initcall proc_kcore_init+0x0/0xb5 returned 0 after 9 usecs [ 2.257057] calling vmcore_init+0x0/0x333 @ 1 [ 2.257057] initcall vmcore_init+0x0/0x333 returned 0 after 0 usecs [ 2.257057] calling proc_kmsg_init+0x0/0x25 @ 1 [ 2.257057] initcall proc_kmsg_init+0x0/0x25 returned 0 after 4 usecs [ 2.257057] calling proc_page_init+0x0/0x42 @ 1 [ 2.257057] initcall proc_page_init+0x0/0x42 returned 0 after 8 usecs [ 2.257057] calling init_devpts_fs+0x0/0x4c @ 1 [ 2.257057] initcall init_devpts_fs+0x0/0x4c returned 0 after 17 usecs [ 2.257057] calling init_ext3_fs+0x0/0x71 @ 1 [ 2.468529] initcall init_ext3_fs+0x0/0x71 returned 0 after 391 usecs [ 2.469461] calling journal_init+0x0/0x99 @ 1 [ 2.480806] initcall journal_init+0x0/0x99 returned 0 after 733 usecs [ 2.481786] calling init_ramfs_fs+0x0/0x12 @ 1 [ 2.481786] initcall init_ramfs_fs+0x0/0x12 returned 0 after 1 usecs [ 2.481786] calling init_hugetlbfs_fs+0x0/0x98 @ 1 [ 2.504505] initcall init_hugetlbfs_fs+0x0/0x98 returned 0 after 188 usecs [ 2.505463] calling init_fat_fs+0x0/0x4f @ 1 [ 2.516787] initcall init_fat_fs+0x0/0x4f returned 0 after 388 usecs [ 2.517722] calling init_vfat_fs+0x0/0x12 @ 1 [ 2.517722] initcall init_vfat_fs+0x0/0x12 returned 0 after 1 usecs [ 2.517722] calling init_msdos_fs+0x0/0x12 @ 1 [ 2.517722] initcall init_msdos_fs+0x0/0x12 returned 0 after 1 usecs [ 2.517722] calling init_iso9660_fs+0x0/0x71 @ 1 [ 2.551591] initcall init_iso9660_fs+0x0/0x71 returned 0 after 219 usecs [ 2.552496] calling init_nfs_fs+0x0/0x148 @ 1 [ 2.564133] initcall init_nfs_fs+0x0/0x148 returned 0 after 733 usecs [ 2.565056] calling init_nlm+0x0/0x22 @ 1 [ 2.565056] initcall init_nlm+0x0/0x22 returned 0 after 112 usecs [ 2.565056] calling init_nls_cp437+0x0/0x12 @ 1 [ 2.565056] initcall init_nls_cp437+0x0/0x12 returned 0 after 1 usecs [ 2.565056] calling init_nls_ascii+0x0/0x12 @ 1 [ 2.565056] initcall init_nls_ascii+0x0/0x12 returned 0 after 0 usecs [ 2.565056] calling init_nls_iso8859_1+0x0/0x12 @ 1 [ 2.565056] initcall init_nls_iso8859_1+0x0/0x12 returned 0 after 0 usecs [ 2.565056] calling init_nls_utf8+0x0/0x29 @ 1 [ 2.565056] initcall init_nls_utf8+0x0/0x29 returned 0 after 1 usecs [ 2.565056] calling init_autofs4_fs+0x0/0x26 @ 1 [ 2.634395] initcall init_autofs4_fs+0x0/0x26 returned 0 after 192 usecs [ 2.635327] calling ipc_init+0x0/0x2f @ 1 [ 2.635327] msgmni has been set to 1755 [ 2.635327] initcall ipc_init+0x0/0x2f returned 0 after 4033 usecs [ 2.635327] calling ipc_sysctl_init+0x0/0x14 @ 1 [ 2.635327] initcall ipc_sysctl_init+0x0/0x14 returned 0 after 150 usecs [ 2.635327] calling init_mqueue_fs+0x0/0xb4 @ 1 [ 2.673945] initcall init_mqueue_fs+0x0/0xb4 returned 0 after 320 usecs [ 2.674770] calling key_proc_init+0x0/0x59 @ 1 [ 2.674770] initcall key_proc_init+0x0/0x59 returned 0 after 9 usecs [ 2.674770] calling selinux_nf_ip_init+0x0/0x62 @ 1 [ 2.674770] SELinux: Registering netfilter hooks [ 2.674770] initcall selinux_nf_ip_init+0x0/0x62 returned 0 after 4885 usecs [ 2.674770] calling init_sel_fs+0x0/0x68 @ 1 [ 2.715172] initcall init_sel_fs+0x0/0x68 returned 0 after 378 usecs [ 2.716056] calling selnl_init+0x0/0x4d @ 1 [ 2.726456] initcall selnl_init+0x0/0x4d returned 0 after 25 usecs [ 2.727439] calling sel_netif_init+0x0/0x66 @ 1 [ 2.727439] initcall sel_netif_init+0x0/0x66 returned 0 after 3 usecs [ 2.727439] calling sel_netnode_init+0x0/0x74 @ 1 [ 2.727439] initcall sel_netnode_init+0x0/0x74 returned 0 after 2 usecs [ 2.727439] calling sel_netport_init+0x0/0x74 @ 1 [ 2.727439] initcall sel_netport_init+0x0/0x74 returned 0 after 2 usecs [ 2.727439] calling aurule_init+0x0/0x37 @ 1 [ 2.727439] initcall aurule_init+0x0/0x37 returned 0 after 0 usecs [ 2.727439] calling crypto_wq_init+0x0/0x2e @ 1 [ 2.790420] initcall crypto_wq_init+0x0/0x2e returned 0 after 181 usecs [ 2.791399] calling crypto_algapi_init+0x0/0xd @ 1 [ 2.791399] initcall crypto_algapi_init+0x0/0xd returned 0 after 5 usecs [ 2.791399] calling skcipher_module_init+0x0/0x39 @ 1 [ 2.791399] initcall skcipher_module_init+0x0/0x39 returned 0 after 0 usecs [ 2.791399] calling chainiv_module_init+0x0/0x12 @ 1 [ 2.791399] initcall chainiv_module_init+0x0/0x12 returned 0 after 1 usecs [ 2.791399] calling eseqiv_module_init+0x0/0x12 @ 1 [ 2.791399] initcall eseqiv_module_init+0x0/0x12 returned 0 after 0 usecs [ 2.791399] calling hmac_module_init+0x0/0x12 @ 1 [ 2.791399] initcall hmac_module_init+0x0/0x12 returned 0 after 0 usecs [ 2.791399] calling md5_mod_init+0x0/0x12 @ 1 [ 2.864367] initcall md5_mod_init+0x0/0x12 returned 0 after 145 usecs [ 2.865354] calling sha1_generic_mod_init+0x0/0x12 @ 1 [ 2.876834] initcall sha1_generic_mod_init+0x0/0x12 returned 0 after 134 usecs [ 2.877820] calling crypto_ecb_module_init+0x0/0x12 @ 1 [ 2.877820] initcall crypto_ecb_module_init+0x0/0x12 returned 0 after 0 usecs [ 2.877820] calling crypto_cbc_module_init+0x0/0x12 @ 1 [ 2.877820] initcall crypto_cbc_module_init+0x0/0x12 returned 0 after 0 usecs [ 2.877820] calling des_generic_mod_init+0x0/0x3f @ 1 [ 2.916598] initcall des_generic_mod_init+0x0/0x3f returned 0 after 250 usecs [ 2.917584] calling aes_init+0x0/0x12 @ 1 [ 2.928660] initcall aes_init+0x0/0x12 returned 0 after 158 usecs [ 2.929641] calling arc4_init+0x0/0x12 @ 1 [ 2.939719] initcall arc4_init+0x0/0x12 returned 0 after 153 usecs [ 2.940701] calling crypto_authenc_module_init+0x0/0x12 @ 1 [ 2.940701] initcall crypto_authenc_module_init+0x0/0x12 returned 0 after 0 usecs [ 2.940701] calling krng_mod_init+0x0/0x12 @ 1 [ 2.965210] alg: No test for stdrng (krng) [ 2.969618] initcall krng_mod_init+0x0/0x12 returned 0 after 4402 usecs [ 2.970598] calling proc_genhd_init+0x0/0x3c @ 1 [ 2.970598] initcall proc_genhd_init+0x0/0x3c returned 0 after 9 usecs [ 2.970598] calling bsg_init+0x0/0x12e @ 1 [ 2.993252] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) [ 2.994185] initcall bsg_init+0x0/0x12e returned 0 after 8085 usecs [ 2.994185] calling noop_init+0x0/0x14 @ 1 [ 2.994185] io scheduler noop registered [ 2.994185] initcall noop_init+0x0/0x14 returned 0 after 4107 usecs [ 2.994185] calling as_init+0x0/0x14 @ 1 [ 2.994185] io scheduler anticipatory registered [ 2.994185] initcall as_init+0x0/0x14 returned 0 after 4799 usecs [ 2.994185] calling deadline_init+0x0/0x14 @ 1 [ 2.994185] io scheduler deadline registered [ 2.994185] initcall deadline_init+0x0/0x14 returned 0 after 4450 usecs [ 2.994185] calling cfq_init+0x0/0x94 @ 1 [ 3.059694] io scheduler cfq registered (default) [ 3.060614] initcall cfq_init+0x0/0x94 returned 0 after 5089 usecs [ 3.060614] calling percpu_counter_startup+0x0/0x3c @ 1 [ 3.060614] initcall percpu_counter_startup+0x0/0x3c returned 0 after 1 usecs [ 3.060614] calling pci_proc_init+0x0/0x6a @ 1 [ 3.060614] initcall pci_proc_init+0x0/0x6a returned 0 after 160 usecs [ 3.060614] calling pcie_portdrv_init+0x0/0x4c @ 1 [ 3.101775] alloc irq_desc for 753 on node -1 [ 3.102499] alloc kstat_irqs on node -1 [ 3.110966] pcieport 0000:00:01.0: setting latency timer to 64 [ 3.117725] alloc irq_desc for 752 on node -1 [ 3.118345] alloc kstat_irqs on node -1 [ 3.126905] pcieport 0000:00:1c.0: setting latency timer to 64 [ 3.133786] alloc irq_desc for 751 on node -1 [ 3.134473] alloc kstat_irqs on node -1 [ 3.142984] pcieport 0000:00:1c.4: setting latency timer to 64 [ 3.149823] initcall pcie_portdrv_init+0x0/0x4c returned 0 after 47285 usecs [ 3.150752] calling aer_service_init+0x0/0x2b @ 1 [ 3.162452] initcall aer_service_init+0x0/0x2b returned 0 after 119 usecs [ 3.163438] calling pci_hotplug_init+0x0/0x1d @ 1 [ 3.163438] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 3.163438] initcall pci_hotplug_init+0x0/0x1d returned 0 after 5756 usecs [ 3.163438] calling pcifront_init+0x0/0x4f @ 1 [ 3.192773] initcall pcifront_init+0x0/0x4f returned 0 after 125 usecs [ 3.193758] calling fb_console_init+0x0/0x11d @ 1 [ 3.204915] initcall fb_console_init+0x0/0x11d returned 0 after 166 usecs [ 3.205839] calling genericbl_init+0x0/0x12 @ 1 [ 3.217092] initcall genericbl_init+0x0/0x12 returned 0 after 114 usecs [ 3.218078] calling xenfb_init+0x0/0x5d @ 1 [ 3.218078] initcall xenfb_init+0x0/0x5d returned -19 after 0 usecs [ 3.218078] calling efifb_init+0x0/0x1f5 @ 1 [ 3.218078] initcall efifb_init+0x0/0x1f5 returned -19 after 4 usecs [ 3.218078] calling acpi_reserve_resources+0x0/0xeb @ 1 [ 3.218078] initcall acpi_reserve_resources+0x0/0xeb returned 0 after 4 usecs [ 3.218078] calling irqrouter_init_sysfs+0x0/0x38 @ 1 [ 3.265406] initcall irqrouter_init_sysfs+0x0/0x38 returned 0 after 236 usecs [ 3.266340] calling acpi_ac_init+0x0/0x45 @ 1 [ 3.277841] initcall acpi_ac_init+0x0/0x45 returned 0 after 189 usecs [ 3.278776] calling acpi_button_init+0x0/0x56 @ 1 [ 3.289986] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/PNP0C0C:00/input/input0 [ 3.290970] ACPI: Power Button [PWRB] [ 3.304112] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 3.305054] ACPI: Power Button [PWRF] [ 3.316175] initcall acpi_button_init+0x0/0x56 returned 0 after 25830 usecs [ 3.317108] calling acpi_fan_init+0x0/0x56 @ 1 [ 3.328507] initcall acpi_fan_init+0x0/0x56 returned 0 after 175 usecs [ 3.329441] calling acpi_video_init+0x0/0x76 @ 1 [ 3.340666] initcall acpi_video_init+0x0/0x76 returned 0 after 270 usecs [ 3.341652] calling acpi_processor_init+0x0/0x136 @ 1 [ 3.354356] ACPI: SSDT 00000000bfec278d 001DD (v01 PmRef Cpu0Ist 00003000 INTL 20050228) [ 3.365512] ACPI: SSDT 00000000bfec296a 0016E (v01 PmRef Cpu1Ist 00003000 INTL 20050228) [ 3.376150] initcall acpi_processor_init+0x0/0x136 returned 0 after 22437 usecs [ 3.380313] calling acpi_container_init+0x0/0x42 @ 1 [ 3.395708] initcall acpi_container_init+0x0/0x42 returned 0 after 6158 usecs [ 3.396055] calling acpi_thermal_init+0x0/0x7b @ 1 [ 3.408600] initcall acpi_thermal_init+0x0/0x7b returned 0 after 200 usecs [ 3.409531] calling acpi_battery_init+0x0/0x16 @ 1 [ 3.420312] initcall acpi_battery_init+0x0/0x16 returned 0 after 8 usecs [ 3.421096] calling 1_acpi_battery_init_async+0x0/0x3c @ 610 [ 3.421268] initcall 1_acpi_battery_init_async+0x0/0x3c returned 0 after 160 usecs [ 3.421215] calling xenbus_probe_initcall+0x0/0x37 @ 1 [ 3.421215] initcall xenbus_probe_initcall+0x0/0x37 returned 0 after 0 usecs [ 3.421215] calling evtchn_init+0x0/0x6e @ 1 [ 3.460080] Event-channel device installed. [ 3.463313] initcall evtchn_init+0x0/0x6e returned 0 after 4552 usecs [ 3.463313] calling gntdev_init+0x0/0x3d @ 1 [ 3.476181] initcall gntdev_init+0x0/0x3d returned 0 after 181 usecs [ 3.477156] calling pciback_init+0x0/0x151 @ 1 [ 3.487971] initcall pciback_init+0x0/0x151 returned 0 after 256 usecs [ 3.488904] calling blkif_init+0x0/0x17b @ 1 [ 3.503897] initcall blkif_init+0x0/0x17b returned 0 after 4288 usecs [ 3.504825] calling blktap_init+0x0/0xf1 @ 1 [ 3.504825] blktap_device_init: blktap device major 253 [ 3.504825] blktap_ring_init: blktap ring major: 251 [ 3.526977] initcall blktap_init+0x0/0xf1 returned 0 after 11354 usecs [ 3.527571] calling netback_init+0x0/0x3d7 @ 1 [ 3.541457] registering netback [ 3.545542] initcall netback_init+0x0/0x3d7 returned 0 after 6689 usecs [ 3.546508] calling xenfs_init+0x0/0x6a @ 1 [ 3.546508] initcall xenfs_init+0x0/0x6a returned 0 after 19 usecs [ 3.546508] calling hypervisor_subsys_init+0x0/0x25 @ 1 [ 3.546508] initcall hypervisor_subsys_init+0x0/0x25 returned 0 after 0 usecs [ 3.546508] calling hyper_sysfs_init+0x0/0xfb @ 1 [ 3.581928] initcall hyper_sysfs_init+0x0/0xfb returned 0 after 51 usecs [ 3.582895] calling platform_pci_module_init+0x0/0x29 @ 1 [ 3.582895] initcall platform_pci_module_init+0x0/0x29 returned -19 after 0 usecs [ 3.582895] calling rand_initialize+0x0/0x2c @ 1 [ 3.582895] initcall rand_initialize+0x0/0x2c returned 0 after 18 usecs [ 3.582895] calling tty_init+0x0/0xf5 @ 1 [ 3.629047] initcall tty_init+0x0/0xf5 returned 0 after 9615 usecs [ 3.629969] calling pty_init+0x0/0x336 @ 1 [ 3.640297] initcall pty_init+0x0/0x336 returned 0 after 251 usecs [ 3.641271] calling sysrq_init+0x0/0x25 @ 1 [ 3.641271] initcall sysrq_init+0x0/0x25 returned 0 after 14 usecs [ 3.641271] calling xen_hvc_init+0x0/0xde @ 1 [ 3.641271] alloc irq_desc for 750 on node -1 [ 3.641271] alloc kstat_irqs on node -1 [ 3.673104] initcall xen_hvc_init+0x0/0xde returned 0 after 10224 usecs [ 3.674077] calling hpet_init+0x0/0x6a @ 1 [ 3.684918] initcall hpet_init+0x0/0x6a returned 0 after 374 usecs [ 3.685894] calling nvram_init+0x0/0x82 @ 1 [ 3.696145] Non-volatile memory driver v1.3 [ 3.697115] initcall nvram_init+0x0/0x82 returned 0 after 4513 usecs [ 3.697115] calling mod_init+0x0/0x220 @ 1 [ 3.697115] initcall mod_init+0x0/0x220 returned -19 after 445 usecs [ 3.697115] calling mod_init+0x0/0xba @ 1 [ 3.697115] initcall mod_init+0x0/0xba returned -19 after 57 usecs [ 3.697115] calling mod_init+0x0/0x4d @ 1 [ 3.697115] initcall mod_init+0x0/0x4d returned -19 after 0 usecs [ 3.697115] calling agp_init+0x0/0x26 @ 1 [ 3.697115] Linux agpgart interface v0.103 [ 3.697115] initcall agp_init+0x0/0x26 returned 0 after 4277 usecs [ 3.697115] calling agp_intel_init+0x0/0x29 @ 1 [ 3.761259] initcall agp_intel_init+0x0/0x29 returned 0 after 376 usecs [ 3.762229] calling drm_core_init+0x0/0x12d @ 1 [ 3.773290] [drm] Initialized drm 1.1.0 20060810 [ 3.774241] initcall drm_core_init+0x0/0x12d returned 0 after 4950 usecs [ 3.774241] calling i915_init+0x0/0x52 @ 1 [ 3.774241] initcall i915_init+0x0/0x52 returned 0 after 413 usecs [ 3.774241] calling cn_proc_init+0x0/0x3d @ 1 [ 3.774241] initcall cn_proc_init+0x0/0x3d returned 0 after 2 usecs [ 3.774241] calling serial8250_init+0x0/0x143 @ 1 [ 3.774241] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 3.825959] initcall serial8250_init+0x0/0x143 returned 0 after 7329 usecs [ 3.826934] calling serial8250_pnp_init+0x0/0x12 @ 1 [ 3.839178] initcall serial8250_pnp_init+0x0/0x12 returned 0 after 618 usecs [ 3.840153] calling serial8250_pci_init+0x0/0x1b @ 1 [ 3.852121] initcall serial8250_pci_init+0x0/0x1b returned 0 after 176 usecs [ 3.853092] calling topology_sysfs_init+0x0/0x50 @ 1 [ 3.853092] initcall topology_sysfs_init+0x0/0x50 returned 0 after 28 usecs [ 3.853092] calling brd_init+0x0/0x1a6 @ 1 [ 3.882651] brd: module loaded [ 3.883606] initcall brd_init+0x0/0x1a6 returned 0 after 9042 usecs [ 3.883606] calling loop_init+0x0/0x1b3 @ 1 [ 3.900238] loop: module loaded [ 3.901194] initcall loop_init+0x0/0x1b3 returned 0 after 6358 usecs [ 3.901194] calling xlblk_init+0x0/0x7a @ 1 [ 3.915028] initcall xlblk_init+0x0/0x7a returned 0 after 136 usecs [ 3.916003] calling mac_hid_init+0x0/0x8e @ 1 [ 3.926584] input: Macintosh mouse button emulation as /devices/virtual/input/input2 [ 3.927559] initcall mac_hid_init+0x0/0x8e returned 0 after 8413 usecs [ 3.927559] calling spi_transport_init+0x0/0x79 @ 1 [ 3.947384] initcall spi_transport_init+0x0/0x79 returned 0 after 234 usecs [ 3.948359] calling init_sd+0x0/0x142 @ 1 [ 3.959363] initcall init_sd+0x0/0x142 returned 0 after 275 usecs [ 3.960307] calling init_sr+0x0/0x46 @ 1 [ 3.970214] initcall init_sr+0x0/0x46 returned 0 after 130 usecs [ 3.971189] calling init_sg+0x0/0x125 @ 1 [ 3.981101] initcall init_sg+0x0/0x125 returned 0 after 163 usecs [ 3.982030] calling ahci_init+0x0/0x1b @ 1 [ 3.992182] initcall ahci_init+0x0/0x1b returned 0 after 180 usecs [ 3.993152] calling piix_init+0x0/0x29 @ 1 [ 3.993152] ata_piix 0000:00:1f.2: version 2.13 [ 3.993152] xen: registering gsi 17 triggering 0 polarity 1 [ 3.993152] alloc irq_desc for 17 on node 0 [ 3.993152] alloc kstat_irqs on node 0 [ 4.022817] xen: --> irq=17 (XEN) IOAPIC[0]: Set PCI routing entry (2-17 -> 0xb8 -> IRQ 17 Mode:1 Active:1) [ 4.032755] ata_piix 0000:00:1f.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 4.033745] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ] [ 4.196149] ata_piix 0000:00:1f.2: setting latency timer to 64 [ 4.202560] scsi0 : ata_piix [ 4.206169] scsi1 : ata_piix [ 4.212151] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x30d0 irq 14 [ 4.212305] ata2: SATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x30d8 irq 15 [ 4.226906] c(XEN) IOAPIC[0]: Set PCI routing entry (2-18 -> 0xc0 -> IRQ 18 Mode:1 Active:1) alling 2_async_port_probe+0x0/0xb3 @ 782 [ 4.226922] xen: registering gsi 18 triggering 0 polarity 1 [ 4.226931] alloc irq_desc for 18 on node 0 [ 4.226935] alloc kstat_irqs on node 0 [ 4.226942] xen: --> irq=18 [ 4.235170] ata_piix 0000:00:1f.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 4.235189] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ] [ 4.235270] calling 3_async_port_probe+0x0/0xb3 @ 610 [ 4.377143] ata_piix 0000:00:1f.5: setting latency timer to 64 [ 4.383525] scsi2 : ata_piix [ 4.387115] scsi3 : ata_piix [ 4.391576] ata3: SATA max UDMA/133 cmd 0x3428 ctl 0x341c bmdma 0x30f0 irq 18 [ 4.391576] ata4: SATA max UDMA/133 cmd 0x3420 ctl 0x3418 bmdma 0x30f8 irq 18 [ 4.407300] calling 4_async_port_probe+0x0/0xb3 @ 789 [ 4.407367] initcall piix_init+0x0/0x29 returned 0 after 394728 usecs [ 4.407374] calling amd_init+0x0/0x1b @ 1 [ 4.407533] initcall amd_init+0x0/0x1b returned 0 after 149 usecs [ 4.407538] calling mpiix_init+0x0/0x1b @ 1 [ 4.407686] initcall mpiix_init+0x0/0x1b returned 0 after 138 usecs [ 4.407691] calling oldpiix_init+0x0/0x1b @ 1 [ 4.407835] initcall oldpiix_init+0x0/0x1b returned 0 after 135 usecs [ 4.407840] calling sch_init+0x0/0x1b @ 1 [ 4.407987] initcall sch_init+0x0/0x1b returned 0 after 137 usecs [ 4.407991] calling ata_generic_init+0x0/0x1b @ 1 [ 4.408143] initcall ata_generic_init+0x0/0x1b returned 0 after 142 usecs [ 4.408148] calling e1000_init_module+0x0/0x87 @ 1 [ 4.408152] Intel(R) PRO/1000 Network Driver - version 7.3.21-k5-NAPI [ 4.408156] Copyright (c) 1999-2006 Intel Corporation. [ 4.408328] initcall e1000_init_module+0x0/0x87 returned 0 after 169 usecs [ 4.408333] calling e1000_init_module+0x0/0x6b @ 1 [ 4.408337] e1000e: Intel(R) PRO/1000 Network Driver - 1.0.2-k2 [ 4.408340] e1000e: Copyright (c) 1999-2008 Intel Corporation. [ 4.408504] initcall e1000_init_module+0x0/0x6b returned 0 after 160 usecs [ 4.408509] calling ne2k_pci_init+0x0/0x1b @ 1 [ 4.408659] initcall ne2k_pci_init+0x0/0x1b returned 0 after 141 usecs [ 4.408664] calling e100_init_module+0x0/0x5d @ 1 [ 4.408668] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI [ 4.408672] e100: Copyright(c) 1999-2006 Intel Corporation [ 4.408818] initcall e100_init_module+0x0/0x5d returned 0 after 144 usecs [ 4.408823] calling tg3_init+0x0/0x1b @ 1 [ 4.408868] tg3.c:v3.102 (September 1, 2009) [ 4.408902] xen: registering gsi 16 triggering 0 polarity 1 [ 4.408906] xen_allocate_pirq: returning irq 16 for gsi 16 [ 4.408910] xen: --> irq=16 [ 4.408915] Already setup the GSI :16 [ 4.408920] tg3 0000:03:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 4.408940] tg3 0000:03:00.0: setting latency timer to 64 [ 4.602023] calling 5_async_port_probe+0x0/0xb3 @ 790 [ 4.612890] eth0: Tigon3 [partno(BCM95755) rev a002] (PCI Express) MAC address 00:1b:fc:80:39:53 [ 4.613304] eth0: attached PHY is 5755 (10/100/1000Base-T Ethernet) (WireSpeed[1]) [ 4.613304] eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1] [ 4.613304] eth0: dma_rwctrl[76180000] dma_mask[64-bit] [ 4.642877] initcall tg3_init+0x0/0x1b returned 0 after 228562 usecs [ 4.643847] calling bnx2_init+0x0/0x1b @ 1 [ 4.654215] initcall bnx2_init+0x0/0x1b returned 0 after 169 usecs [ 4.655185] calling sky2_init_module+0x0/0x29 @ 1 [ 4.655185] sky2 driver version 1.25 [ 4.669829] initcall sky2_init_module+0x0/0x29 returned 0 after 3915 usecs [ 4.670800] calling net_olddevs_init+0x0/0x9e @ 1 [ 4.670800] initcall net_olddevs_init+0x0/0x9e returned 0 after 4 usecs [ 4.670800] calling init_nic+0x0/0x1b @ 1 [ 4.693657] initcall init_nic+0x0/0x1b returned 0 after 157 usecs [ 4.694627] calling netif_init+0x0/0x66 @ 1 [ 4.694627] initcall netif_init+0x0/0x66 returned 0 after 0 usecs [ 4.694627] calling rtl8139_init_module+0x0/0x1b @ 1 [ 4.716603] initcall rtl8139_init_module+0x0/0x1b returned 0 after 176 usecs [ 4.717573] calling tun_init+0x0/0x93 @ 1 [ 4.717573] tun: Universal TUN/TAP device driver, 1.6 [ 4.717573] tun: (C) 1999-2004 Max Krasnyansky [ 4.740411] initcall tun_init+0x0/0x93 returned 0 after 11739 usecs [ 4.741385] calling rtl8169_init_module+0x0/0x1b @ 1 [ 4.752535] initcall rtl8169_init_module+0x0/0x1b returned 0 after 159 usecs [ 4.753503] calling init_netconsole+0x0/0x22d @ 1 [ 4.753503] console [netcon0] enabled [ 4.753503] netconsole: network logging started [ 4.753503] initcall init_netconsole+0x0/0x22d returned 0 after 8554 usecs [ 4.753503] calling cdrom_init+0x0/0x6a @ 1 [ 4.753503] initcall cdrom_init+0x0/0x6a returned 0 after 152 usecs [ 4.753503] calling nonstatic_sysfs_init+0x0/0x12 @ 1 [ 4.753503] initcall nonstatic_sysfs_init+0x0/0x12 returned 0 after 1 usecs [ 4.753503] calling yenta_socket_init+0x0/0x1b @ 1 [ 4.810463] initcall yenta_socket_init+0x0/0x1b returned 0 after 172 usecs [ 4.811433] calling mon_init+0x0/0x104 @ 1 [ 4.822466] initcall mon_init+0x0/0x104 returned 0 after 295 usecs [ 4.823439] calling ehci_hcd_init+0x0/0xe7 @ 1 [ 4.823439] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 4.823439] ehci_hcd: block sizes: qh 104 qtd 96 itd 192 sitd 96 [ 4.823439] xen: registering gsi 16 triggering 0 polarity 1 [ 4.823439] xen_allocate_pirq: returning irq 16 for gsi 16 [ 4.823439] xen: --> irq=16 [ 4.861811] Already setup the GSI :16 [ 4.862799] ehci_hcd 0000:00:1a.7: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 4.873272] ehci_hcd 0000:00:1a.7: setting latency timer to 64 [ 4.874253] ehci_hcd 0000:00:1a.7: EHCI Host Controller [ 4.885017] drivers/usb/core/inode.c: creating file 'devices' [ 4.885993] drivers/usb/core/inode.c: creating file '001' [ 4.896991] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 [ 4.897965] ehci_hcd 0000:00:1a.7: reset hcs_params 0x102204 dbg=1 cc=2 pcc=2 ordered !ppc ports=4 [ 4.897965] ehci_hcd 0000:00:1a.7: reset hcc_params 6871 thresh 7 uframes 1024 64 bit addr [ 4.897965] ehci_hcd 0000:00:1a.7: debug port 1 [ 4.913056] ata3: SATA link down (SStatus 0 SControl 300) [ 4.924693] async_waiting @ 789 [ 4.897965] ehci_hcd 0000:00:1a.7: reset command 080032 (park)=0 ithresh=8 Async Periodic period=1024 Reset HALT [ 4.952159] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported [ 4.952303] ehci_hcd 0000:00:1a.7: supports USB remote wakeup [ 4.952303] ehci_hcd 0000:00:1a.7: irq 16, io mem 0xd2304000 [ 4.952303] ehci_hcd 0000:00:1a.7: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT [ 4.952303] ehci_hcd 0000:00:1a.7: init command 010001 (park)=0 ithresh=1 period=1024 RUN [ 4.999350] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00 [ 5.005507] usb usb1: default language 0x0409 [ 5.010199] usb usb1: udev 1, busnum 1, minor = 0 [ 5.011168] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 5.009056] ata2.00: SATA link down (SStatus 0 SControl 300) [ 5.019787] ata2.01: SATA link down (SStatus 4 SControl 300) [ 5.019968] async_waiting @ 610 [ 5.019961] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 5.019961] usb usb1: Product: EHCI Host Controller [ 5.019961] usb usb1: Manufacturer: Linux 2.6.32.28 ehci_hcd [ 5.019961] usb usb1: SerialNumber: 0000:00:1a.7 [ 5.061770] usb usb1: usb_probe_device [ 5.062736] usb usb1: configuration #1 chosen from 1 choice [ 5.071713] usb usb1: adding 1-0:1.0 (config #1, interface 0) [ 5.075162] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 5.078621] ata4.00: ATAPI: HL-DT-STDVD-RAM GSA-H30L, 1.06, max UDMA/100 [ 5.084605] ata4.00: configured for UDMA/100 [ 5.085541] async_waiting @ 790 [ 5.099525] hub 1-0:1.0: usb_probe_interface [ 5.100490] hub 1-0:1.0: usb_probe_interface - got id [ 5.100490] hub 1-0:1.0: USB hub found [ 5.118855] hub 1-0:1.0: 4 ports detected [ 5.119836] hub 1-0:1.0: standalone hub [ 5.119836] hub 1-0:1.0: no power switching (usb 1.0) [ 5.119836] hub 1-0:1.0: individual port over-current protection [ 5.119836] hub 1-0:1.0: power on to power good time: 20ms [ 5.144770] hub 1-0:1.0: local power source is good [ 5.145748] hub 1-0:1.0: trying to enable port power on non-switchable hub [ 5.157259] drivers/usb/core/inode.c: creating file '001' [ 5.163075] xen: registering gsi 16 triggering 0 polarity 1 [ 5.164012] xen_allocate_pirq: returning irq 16 for gsi 16 [ 5.170208] ata1.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 5.170243] ata1.01: SATA link down (SStatus 4 SControl 300) [ 5.173866] ata1.00: ATA-7: Hitachi HDS721616PLA380, P22OABBA, max UDMA/100 [ 5.173871] ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 5.179889] ata1.00: configured for UDMA/100 [ 5.179910] async_waiting @ 782 [ 5.179915] async_continuing @ 782 after 0 usec [ 5.180101] scsi 0:0:0:0: Direct-Access ATA Hitachi HDS72161 P22O PQ: 0 ANSI: 5 [ 5.180934] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 5.181125] initcall 2_async_port_probe+0x0/0xb3 returned 0 after 884363 usecs [ 5.181143] calling 6_sd_probe_async+0x0/0x1db @ 782 [ 5.181180] async_continuing @ 610 after 157429 usec [ 5.181186] initcall 3_async_port_probe+0x0/0xb3 returned 0 after 923741 usecs [ 5.181203] async_continuing @ 789 after 250494 usec [ 5.181209] initcall 4_async_port_probe+0x0/0xb3 returned 0 after 565743 usecs [ 5.181238] async_continuing @ 790 after 93449 usec [ 5.181459] sd 0:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB) [ 5.181641] sd 0:0:0:0: [sda] Write Protect is off [ 5.181646] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 5.181738] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 5.180677] xen: --> irq=16 [ 5.304484] Already setup the GSI :16 [ 5.305467] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 5.315958] ehci_hcd 0000:00:1a.7: GetStatus port 2 status 001403 POWER sig=k CSC CONNECT [ 5.316445] sda: [ 5.316638] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 5.316649] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 5.316660] drivers/usb/core/inode.c: creating file '002' [ 5.316841] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 [ 5.316852] ehci_hcd 0000:00:1d.7: reset hcs_params 0x103206 dbg=1 cc=3 pcc=2 ordered !ppc ports=6 [ 5.316902] ehci_hcd 0000:00:1d.7: reset hcc_params 6871 thresh 7 uframes 1024 64 bit addr [ 5.320002] scsi 3:0:0:0: CD-ROM HL-DT-ST DVD-RAM GSA-H30L 1.06 PQ: 0 ANSI: 5 [ 5.320119] ehci_hcd 0000:00:1d.7: debug port 1 [ 5.320129] ehci_hcd 0000:00:1d.7: reset command 080032 (park)=0 ithresh=8 Async Periodic period=1024 Reset HALT [ 5.320968] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported [ 5.320968] ehci_hcd 0000:00:1d.7: supports USB remote wakeup [ 5.320968] ehci_hcd 0000:00:1d.7: irq 16, io mem 0xd2304400 [ 5.320968] ehci_hcd 0000:00:1d.7: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT [ 5.327943] ehci_hcd 0000:00:1d.7: init command 010001 (park)=0 ithresh=1 period=1024 RUN [ 5.331654] sda1 sda2 < [ 5.333089] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 5.441462] hub 1-0:1.0: port 2: status 0501 change 0001 [ 5.441574] sda5sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray [ 5.441681] Uniform CD-ROM driver Revision: 3.20 [ 5.441870] usb usb2: default language 0x0409 [ 5.441896] usb usb2: udev 1, busnum 2, minor = 128 [ 5.441900] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 5.441905] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 5.441909] usb usb2: Product: EHCI Host Controller [ 5.441913] usb usb2: Manufacturer: Linux 2.6.32.28 ehci_hcd [ 5.441916] usb usb2: SerialNumber: 0000:00:1d.7 [ 5.442320] usb usb2: usb_probe_device [ 5.442325] usb usb2: configuration #1 chosen from 1 choice [ 5.442342] usb usb2: adding 2-0:1.0 (config #1, interface 0) [ 5.442501] sr 3:0:0:0: Attached scsi CD-ROM sr0 [ 5.442648] hub 2-0:1.0: usb_probe_interface [ 5.442652] hub 2-0:1.0: usb_probe_interface - got id [ 5.442656] hub 2-0:1.0: USB hub found [ 5.442706] hub 2-0:1.0: 6 ports detected [ 5.442710] hub 2-0:1.0: standalone hub [ 5.442713] hub 2-0:1.0: no power switching (usb 1.0) [ 5.442716] hub 2-0:1.0: individual port over-current protection [ 5.442720] hub 2-0:1.0: power on to power good time: 20ms [ 5.442737] hub 2-0:1.0: local power source is good [ 5.442741] hub 2-0:1.0: trying to enable port power on non-switchable hub [ 5.442839] drivers/usb/core/inode.c: creating file '001' [ 5.443188] initcall ehci_hcd_init+0x0/0xe7 returned 0 after 595093 usecs [ 5.443194] calling ohci_hcd_mod_init+0x0/0xba @ 1 [ 5.443198] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 5.443201] ohci_hcd: block sizes: ed 80 td 96 [ 5.443365] sr 3:0:0:0: Attached scsi generic sg1 type 5 [ 5.443513] initcall ohci_hcd_mod_init+0x0/0xba returned 0 after 305 usecs [ 5.443519] calling uhci_hcd_init+0x0/0x11d @ 1 [ 5.443522] uhci_hcd: USB Universal Host Controller Interface driver [ 5.443708] initcall 5_async_port_probe+0x0/0xb3 returned 0 after 816633 usecs [ 5.443825] xen: registering gsi 16 triggering 0 polarity 1 [ 5.443829] xen_allocate_pirq: returning irq 16 for gsi 16 [ 5.443833] xen: --> irq=16 [ 5.443839] Already setup the GSI :16 [ 5.443843] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 5.443862] uhci_hcd 0000:00:1a.0: setting latency timer to 64 [ 5.443872] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 5.443885] drivers/usb/core/inode.c: creating file '003' [ 5.444078] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 [ 5.444092] uhci_hcd 0000:00:1a.0: detected 2 ports [ 5.444105] uhci_hcd 0000:00:1a.0: uhci_check_and_reset_hc: cmd = 0x0000 [ 5.444109] uhci_hcd 0000:00:1a.0: Performing full reset [ 5.444135] uhci_hcd 0000:00:1a.0: supports USB remote wakeup [ 5.444149] uhci_hcd 0000:00:1a.0: irq 16, io base 0x00003000 [ 5.446762] usb usb3: default language 0x0409 [ 5.446788] usb usb3: udev 1, busnum 3, minor = 256 [ 5.446792] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 5.446796] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 5.446800] usb usb3: Product: UHCI Host Controller [ 5.446804] usb usb3: Manufacturer: Linux 2.6.32.28 uhci_hcd [ 5.446807] usb usb3: SerialNumber: 0000:00:1a.0 [ 5.447035] usb usb3: usb_probe_device [ 5.447040] usb usb3: configuration #1 chosen from 1 choice [ 5.447072] usb usb3: adding 3-0:1.0 (config #1, interface 0) [ 5.447233] hub 3-0:1.0: usb_probe_interface [ 5.447237] hub 3-0:1.0: usb_probe_interface - got id [ 5.447241] hub 3-0:1.0: USB hub found [ 5.448345] hub 3-0:1.0: 2 ports detected [ 5.448349] hub 3-0:1.0: standalone hub [ 5.448352] hub 3-0:1.0: no power switching (usb 1.0) [ 5.448355] hub 3-0:1.0: individual port over-current protection [ 5.448359] hub 3-0:1.0: power on to power good time: 2ms [ 5.448376] hub 3-0:1.0: local power source is good [ 5.448380] hub 3-0:1.0: trying to enable port power on non-switchable hub [ 5.448432] drivers/usb/core/inode.c: creating file '001' [ 5.448526] xen: registering gsi 17 triggering 0 polarity 1 [ 5.448530] xen_allocate_pirq: returning irq 17 for gsi 17 [ 5.448534] xen: --> irq=17 [ 5.448539] Already setup the GSI :17 [ 5.448544] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 5.448561] uhci_hcd 0000:00:1a.1: setting latency timer to 64 [ 5.448571] uhci_hcd 0000:00:1a.1: UHCI Host Controller [ 5.448581] drivers/usb/core/inode.c: creating file '004' [ 5.448768] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 [ 5.448781] uhci_hcd 0000:00:1a.1: detected 2 ports [ 5.448795] uhci_hcd 0000:00:1a.1: uhci_check_and_reset_hc: cmd = 0x0000 [ 5.448799] uhci_hcd 0000:00:1a.1: Performing full reset [ 5.448825] uhci_hcd 0000:00:1a.1: supports USB remote wakeup [ 5.448870] uhci_hcd 0000:00:1a.1: irq 17, io base 0x00003020 [ 5.452557] usb usb4: default language 0x0409 [ 5.452582] usb usb4: udev 1, busnum 4, minor = 384 [ 5.452586] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 5.452590] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 5.452594] usb usb4: Product: UHCI Host Controller [ 5.452598] usb usb4: Manufacturer: Linux 2.6.32.28 uhci_hcd [ 5.452602] usb usb4: SerialNumber: 0000:00:1a.1 [ 5.452861] usb usb4: usb_probe_device [ 5.452865] usb usb4: configuration #1 chosen from 1 choice [ 5.452881] usb usb4: adding 4-0:1.0 (config #1, interface 0) [ 5.453032] hub 4-0:1.0: usb_probe_interface [ 5.453036] hub 4-0:1.0: usb_probe_interface - got id [ 5.453040] hub 4-0:1.0: USB hub found [ 5.453883] hub 4-0:1.0: 2 ports detected [ 5.453887] hub 4-0:1.0: standalone hub [ 5.453890] hub 4-0:1.0: no power switching (usb 1.0) [ 5.453894] hub 4-0:1.0: individual port over-current protection [ 5.453897] hub 4-0:1.0: power on to power good time: 2ms [ 5.453914] hub 4-0:1.0: local power source is good [ 5.453918] hub 4-0:1.0: trying to enable port power on non-switchable hub [ 5.453970] drivers/usb/core/inode.c: creating file '001' [ 5.454073] xen: registering gsi 16 triggering 0 polarity 1 [ 5.454077] xen_allocate_pirq: returning irq 16 for gsi 16 [ 5.454081] xen: --> irq=16 [ 5.454134] Already setup the GSI :16 [ 5.454138] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 5.454157] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 5.454167] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 5.454177] drivers/usb/core/inode.c: creating file '005' [ 5.454362] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5 [ 5.454375] uhci_hcd 0000:00:1d.0: detected 2 ports [ 5.454389] uhci_hcd 0000:00:1d.0: uhci_check_and_reset_hc: cmd = 0x0000 [ 5.454393] uhci_hcd 0000:00:1d.0: Performing full reset [ 5.454420] uhci_hcd 0000:00:1d.0: supports USB remote wakeup [ 5.454433] uhci_hcd 0000:00:1d.0: irq 16, io base 0x00003040 [ 5.454979] usb usb5: default language 0x0409 [ 5.455004] usb usb5: udev 1, busnum 5, minor = 512 [ 5.455008] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 [ 5.455012] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 5.455016] usb usb5: Product: UHCI Host Controller [ 5.455020] usb usb5: Manufacturer: Linux 2.6.32.28 uhci_hcd [ 5.455023] usb usb5: SerialNumber: 0000:00:1d.0 [ 5.455269] usb usb5: usb_probe_device [ 5.455274] usb usb5: configuration #1 chosen from 1 choice [ 5.455289] usb usb5: adding 5-0:1.0 (config #1, interface 0) [ 5.455443] hub 5-0:1.0: usb_probe_interface [ 5.455447] hub 5-0:1.0: usb_probe_interface - got id [ 5.455450] hub 5-0:1.0: USB hub found [ 5.455477] hub 5-0:1.0: 2 ports detected [ 5.455481] hub 5-0:1.0: standalone hub [ 5.455485] hub 5-0:1.0: no power switching (usb 1.0) [ 5.455488] hub 5-0:1.0: individual port over-current protection [ 5.455492] hub 5-0:1.0: power on to power good time: 2ms [ 5.455508] hub 5-0:1.0: local power source is good [ 5.455512] hub 5-0:1.0: trying to enable port power on non-switchable hub [ 5.455567] drivers/usb/core/inode.c: creating file '001' [ 5.455659] xen: registering gsi 17 triggering 0 polarity 1 [ 5.455663] xen_allocate_pirq: returning irq 17 for gsi 17 [ 5.455666] xen: --> irq=17 [ 5.455672] Already setup the GSI :17 [ 5.455676] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 5.455694] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 5.455703] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 5.455715] drivers/usb/core/inode.c: creating file '006' [ 5.455902] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6 [ 5.455916] uhci_hcd 0000:00:1d.1: detected 2 ports [ 5.455929] uhci_hcd 0000:00:1d.1: uhci_check_and_reset_hc: cmd = 0x0000 [ 5.455933] uhci_hcd 0000:00:1d.1: Performing full reset [ 5.455961] uhci_hcd 0000:00:1d.1: supports USB remote wakeup [ 5.455974] uhci_hcd 0000:00:1d.1: irq 17, io base 0x00003060 [ 5.459644] sda6 [ 5.459784] usb usb6: default language 0x0409 [ 5.459809] usb usb6: udev 1, busnum 6, minor = 640 [ 5.459813] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 [ 5.459818] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 5.459822] usb usb6: Product: UHCI Host Controller [ 5.459825] usb usb6: Manufacturer: Linux 2.6.32.28 uhci_hcd [ 5.459829] usb usb6: SerialNumber: 0000:00:1d.1 [ 5.460063] usb usb6: usb_probe_device [ 5.460067] usb usb6: configuration #1 chosen from 1 choice [ 5.460101] usb usb6: adding 6-0:1.0 (config #1, interface 0) [ 5.460251] hub 6-0:1.0: usb_probe_interface [ 5.460255] hub 6-0:1.0: usb_probe_interface - got id [ 5.460259] hub 6-0:1.0: USB hub found [ 5.460299] hub 6-0:1.0: 2 ports detected [ 5.460303] hub 6-0:1.0: standalone hub [ 5.460306] hub 6-0:1.0: no power switching (usb 1.0) [ 5.460309] hub 6-0:1.0: individual port over-current protection [ 5.460313] hub 6-0:1.0: power on to power good time: 2ms [ 5.460329] hub 6-0:1.0: local power source is good [ 5.460333] hub 6-0:1.0: trying to enable port power on non-switchable hub [ 5.460388] drivers/usb/core/inode.c: creating file '001' [ 5.460480] xen: registering gsi 18 triggering 0 polarity 1 [ 5.460484] xen_allocate_pirq: returning irq 18 for gsi 18 [ 5.460488] xen: --> irq=18 [ 5.460493] Already setup the GSI :18 [ 5.460498] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 5.460515] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 5.460526] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 5.460535] drivers/usb/core/inode.c: creating file '007' [ 5.460717] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7 [ 5.460731] uhci_hcd 0000:00:1d.2: detected 2 ports [ 5.460745] uhci_hcd 0000:00:1d.2: uhci_check_and_reset_hc: cmd = 0x0000 [ 5.460749] uhci_hcd 0000:00:1d.2: Performing full reset [ 5.460777] uhci_hcd 0000:00:1d.2: supports USB remote wakeup [ 5.460790] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00003080 [ 5.464587] usb usb7: default language 0x0409 [ 5.464612] usb usb7: udev 1, busnum 7, minor = 768 [ 5.464616] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001 [ 5.464620] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 5.464624] usb usb7: Product: UHCI Host Controller [ 5.464628] usb usb7: Manufacturer: Linux 2.6.32.28 uhci_hcd [ 5.464632] usb usb7: SerialNumber: 0000:00:1d.2 [ 5.464856] usb usb7: usb_probe_device [ 5.464860] usb usb7: configuration #1 chosen from 1 choice [ 5.464876] usb usb7: adding 7-0:1.0 (config #1, interface 0) [ 5.465037] hub 7-0:1.0: usb_probe_interface [ 5.465041] hub 7-0:1.0: usb_probe_interface - got id [ 5.465045] hub 7-0:1.0: USB hub found [ 5.465089] hub 7-0:1.0: 2 ports detected [ 5.465093] hub 7-0:1.0: standalone hub [ 5.465096] hub 7-0:1.0: no power switching (usb 1.0) [ 5.465099] hub 7-0:1.0: individual port over-current protection [ 5.465103] hub 7-0:1.0: power on to power good time: 2ms [ 5.465120] hub 7-0:1.0: local power source is good [ 5.465124] hub 7-0:1.0: trying to enable port power on non-switchable hub [ 5.465177] drivers/usb/core/inode.c: creating file '001' [ 5.465394] initcall uhci_hcd_init+0x0/0x11d returned 0 after 21354 usecs [ 5.465400] calling usblp_init+0x0/0x1b @ 1 [ 5.465545] usbcore: registered new interface driver usblp [ 5.465553] initcall usblp_init+0x0/0x1b returned 0 after 144 usecs [ 5.465558] calling usb_stor_init+0x0/0x50 @ 1 [ 5.465561] Initializing USB Mass Storage driver... [ 5.465722] usbcore: registered new interface driver usb-storage [ 5.465728] USB Mass Storage support registered. [ 5.465735] initcall usb_stor_init+0x0/0x50 returned 0 after 167 usecs [ 5.465740] calling usb_usual_init+0x0/0x3d @ 1 [ 5.465902] usbcore: registered new interface driver libusual [ 5.465910] initcall usb_usual_init+0x0/0x3d returned 0 after 161 usecs [ 5.465915] calling i8042_init+0x0/0x3a7 @ 1 [ 5.466430] PNP: No PS/2 controller found. Probing ports directly. [ 5.469340] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 5.469340] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 5.469589] initcall i8042_init+0x0/0x3a7 returned 0 after 3581 usecs [ 5.469594] calling serport_init+0x0/0x34 @ 1 [ 5.469600] initcall serport_init+0x0/0x34 returned 0 after 1 usecs [ 5.469605] calling mousedev_init+0x0/0x62 @ 1 [ 5.469879] mice: PS/2 mouse device common for all mice [ 5.469885] initcall mousedev_init+0x0/0x62 returned 0 after 268 usecs [ 5.469890] calling evdev_init+0x0/0x12 @ 1 [ 5.470322] initcall evdev_init+0x0/0x12 returned 0 after 415 usecs [ 5.470327] calling atkbd_init+0x0/0x27 @ 1 [ 5.470456] initcall atkbd_init+0x0/0x27 returned 0 after 120 usecs [ 5.470461] calling psmouse_init+0x0/0x6f @ 1 [ 5.470659] initcall psmouse_init+0x0/0x6f returned 0 after 186 usecs [ 5.470664] calling xenkbd_init+0x0/0x5d @ 1 [ 5.470669] initcall xenkbd_init+0x0/0x5d returned -19 after 0 usecs [ 5.470673] calling cmos_init+0x0/0x6a @ 1 [ 5.470726] rtc_cmos 00:04: RTC can wake from S4 [ 5.470910] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0 [ 5.470964] rtc0: alarms up to one month, y3k, 114 bytes nvram [ 5.471101] initcall cmos_init+0x0/0x6a returned 0 after 411 usecs [ 5.471106] calling i2c_i801_init+0x0/0x1b @ 1 [ 5.471164] i801_smbus 0000:00:1f.3: enabling device (0001 -> 0003) [ 5.471175] xen: registering gsi 17 triggering 0 polarity 1 [ 5.471180] xen_allocate_pirq: returning irq 17 for gsi 17 [ 5.471183] xen: --> irq=17 [ 5.471189] Already setup the GSI :17 [ 5.471193] i801_smbus 0000:00:1f.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 5.471498] initcall i2c_i801_init+0x0/0x1b returned 0 after 377 usecs [ 5.471504] calling xen_wdt_init_module+0x0/0x74 @ 1 [ 5.471507] wdt: Xen WatchDog Timer Driver v0.01 [ 5.471893] wdt: initialized (timeout=60s, nowayout=0) [ 5.471903] initcall xen_wdt_init_module+0x0/0x74 returned 0 after 384 usecs [ 5.471908] calling dm_init+0x0/0x46 @ 1 [ 5.472658] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@xxxxxxxxxx [ 5.472665] initcall dm_init+0x0/0x46 returned 0 after 733 usecs [ 5.472670] calling dm_mirror_init+0x0/0x79 @ 1 [ 5.472849] initcall dm_mirror_init+0x0/0x79 returned 0 after 168 usecs [ 5.472854] calling dm_dirty_log_init+0x0/0x59 @ 1 [ 5.472861] initcall dm_dirty_log_init+0x0/0x59 returned 0 after 2 usecs [ 5.472866] calling dm_zero_init+0x0/0x31 @ 1 [ 5.472871] initcall dm_zero_init+0x0/0x31 returned 0 after 0 usecs [ 5.472876] calling cpufreq_gov_dbs_init+0x0/0xab @ 1 [ 5.472996] initcall cpufreq_gov_dbs_init+0x0/0xab returned 0 after 111 usecs [ 5.473001] calling init_ladder+0x0/0x12 @ 1 [ 5.473006] cpuidle: using governor ladder [ 5.473011] initcall init_ladder+0x0/0x12 returned 0 after 4 usecs [ 5.473016] calling init_menu+0x0/0x12 @ 1 [ 5.473019] cpuidle: using governor menu [ 5.473024] initcall init_menu+0x0/0x12 returned 0 after 3 usecs [ 5.473029] calling efivars_init+0x0/0x1ef @ 1 [ 5.473034] initcall efivars_init+0x0/0x1ef returned -19 after 0 usecs [ 5.473039] calling hid_init+0x0/0x66 @ 1 [ 5.473289] initcall hid_init+0x0/0x66 returned 0 after 238 usecs [ 5.473294] calling a4_init+0x0/0x1b @ 1 [ 5.473417] initcall a4_init+0x0/0x1b returned 0 after 114 usecs [ 5.473422] calling apple_init+0x0/0x39 @ 1 [ 5.473552] initcall apple_init+0x0/0x39 returned 0 after 120 usecs [ 5.473557] calling belkin_init+0x0/0x1b @ 1 [ 5.473681] initcall belkin_init+0x0/0x1b returned 0 after 115 usecs [ 5.473686] calling ch_init+0x0/0x1b @ 1 [ 5.473804] initcall ch_init+0x0/0x1b returned 0 after 109 usecs [ 5.473809] calling ch_init+0x0/0x1b @ 1 [ 5.473927] initcall ch_init+0x0/0x1b returned 0 after 109 usecs [ 5.473931] calling cp_init+0x0/0x1b @ 1 [ 5.474049] initcall cp_init+0x0/0x1b returned 0 after 109 usecs [ 5.474056] calling dr_init+0x0/0x1b @ 1 [ 5.474187] initcall dr_init+0x0/0x1b returned 0 after 122 usecs [ 5.474192] calling ez_init+0x0/0x1b @ 1 [ 5.474310] initcall ez_init+0x0/0x1b returned 0 after 109 usecs [ 5.474315] calling gyration_init+0x0/0x1b @ 1 [ 5.474434] initcall gyration_init+0x0/0x1b returned 0 after 109 usecs [ 5.474439] calling ks_init+0x0/0x1b @ 1 [ 5.474560] initcall ks_init+0x0/0x1b returned 0 after 112 usecs [ 5.474565] calling kye_init+0x0/0x1b @ 1 [ 5.474687] initcall kye_init+0x0/0x1b returned 0 after 112 usecs [ 5.474692] calling lg_init+0x0/0x1b @ 1 [ 5.474812] initcall lg_init+0x0/0x1b returned 0 after 111 usecs [ 5.474817] calling ms_init+0x0/0x1b @ 1 [ 5.474938] initcall ms_init+0x0/0x1b returned 0 after 112 usecs [ 5.474943] calling mr_init+0x0/0x1b @ 1 [ 5.475076] initcall mr_init+0x0/0x1b returned 0 after 123 usecs [ 5.475081] calling ntrig_init+0x0/0x1b @ 1 [ 5.475202] initcall ntrig_init+0x0/0x1b returned 0 after 112 usecs [ 5.475207] calling pl_init+0x0/0x1b @ 1 [ 5.475328] initcall pl_init+0x0/0x1b returned 0 after 112 usecs [ 5.475333] calling pl_init+0x0/0x1b @ 1 [ 5.475451] initcall pl_init+0x0/0x1b returned 0 after 109 usecs [ 5.475456] calling samsung_init+0x0/0x1b @ 1 [ 5.475574] initcall samsung_init+0x0/0x1b returned 0 after 109 usecs [ 5.475579] calling sjoy_init+0x0/0x1b @ 1 [ 5.475700] initcall sjoy_init+0x0/0x1b returned 0 after 111 usecs [ 5.475705] calling sony_init+0x0/0x1b @ 1 [ 5.475826] initcall sony_init+0x0/0x1b returned 0 after 112 usecs [ 5.475831] calling sp_init+0x0/0x1b @ 1 [ 5.475956] initcall sp_init+0x0/0x1b returned 0 after 116 usecs [ 5.475961] calling ga_init+0x0/0x1b @ 1 [ 5.476097] initcall ga_init+0x0/0x1b returned 0 after 126 usecs [ 5.476102] calling tm_init+0x0/0x1b @ 1 [ 5.476221] initcall tm_init+0x0/0x1b returned 0 after 110 usecs [ 5.476226] calling ts_init+0x0/0x1b @ 1 [ 5.476347] initcall ts_init+0x0/0x1b returned 0 after 112 usecs [ 5.476352] calling twinhan_init+0x0/0x1b @ 1 [ 5.476470] initcall twinhan_init+0x0/0x1b returned 0 after 109 usecs [ 5.476475] calling zp_init+0x0/0x1b @ 1 [ 5.476594] initcall zp_init+0x0/0x1b returned 0 after 109 usecs [ 5.476599] calling hid_init+0x0/0xc7 @ 1 [ 5.476919] usbcore: registered new interface driver hiddev [ 5.477080] usbcore: registered new interface driver usbhid [ 5.477086] usbhid: v2.6:USB HID core driver [ 5.477092] initcall hid_init+0x0/0xc7 returned 0 after 476 usecs [ 5.477097] calling eeepc_laptop_init+0x0/0x41 @ 1 [ 5.477408] initcall eeepc_laptop_init+0x0/0x41 returned -19 after 297 usecs [ 5.477414] calling init_soundcore+0x0/0x95 @ 1 [ 5.477531] initcall init_soundcore+0x0/0x95 returned 0 after 108 usecs [ 5.477536] calling alsa_sound_init+0x0/0x95 @ 1 [ 5.477589] Advanced Linux Sound Architecture Driver Version 1.0.21. [ 5.477595] initcall alsa_sound_init+0x0/0x95 returned 0 after 51 usecs [ 5.477600] calling alsa_hwdep_init+0x0/0x64 @ 1 [ 5.477612] initcall alsa_hwdep_init+0x0/0x64 returned 0 after 6 usecs [ 5.477617] calling alsa_timer_init+0x0/0x15c @ 1 [ 5.477771] initcall alsa_timer_init+0x0/0x15c returned 0 after 144 usecs [ 5.477776] calling snd_hrtimer_init+0x0/0xf7 @ 1 [ 5.477783] initcall snd_hrtimer_init+0x0/0xf7 returned 0 after 1 usecs [ 5.477788] calling alsa_pcm_init+0x0/0x6c @ 1 [ 5.477799] initcall alsa_pcm_init+0x0/0x6c returned 0 after 6 usecs [ 5.477804] calling snd_mem_init+0x0/0x2c @ 1 [ 5.477815] initcall snd_mem_init+0x0/0x2c returned 0 after 5 usecs [ 5.477820] calling alsa_mixer_oss_init+0x0/0x3c @ 1 [ 5.477825] initcall alsa_mixer_oss_init+0x0/0x3c returned 0 after 0 usecs [ 5.477830] calling alsa_pcm_oss_init+0x0/0x87 @ 1 [ 5.477837] initcall alsa_pcm_oss_init+0x0/0x87 returned 0 after 1 usecs [ 5.477842] calling alsa_seq_init+0x0/0x4c @ 1 [ 5.478001] initcall alsa_seq_init+0x0/0x4c returned 0 after 149 usecs [ 5.478006] calling alsa_seq_device_init+0x0/0x5b @ 1 [ 5.478017] initcall alsa_seq_device_init+0x0/0x5b returned 0 after 5 usecs [ 5.478022] calling alsa_seq_midi_event_init+0x0/0x8 @ 1 [ 5.478028] initcall alsa_seq_midi_event_init+0x0/0x8 returned 0 after 0 usecs [ 5.478033] calling alsa_seq_oss_init+0x0/0x167 @ 1 [ 5.482886] sda7initcall alsa_seq_oss_init+0x0/0x167 returned 0 after 12326 usecs [ 5.490669] calling alsa_seq_dummy_init+0x0/0xbd @ 1 [ 5.490691] initcall alsa_seq_dummy_init+0x0/0xbd returned 0 after 15 usecs [ 5.490696] calling patch_realtek_init+0x0/0x12 @ 1 [ 5.490702] initcall patch_realtek_init+0x0/0x12 returned 0 after 0 usecs [ 5.490707] calling patch_cmedia_init+0x0/0x12 @ 1 [ 5.490712] initcall patch_cmedia_init+0x0/0x12 returned 0 after 0 usecs [ 5.490717] calling patch_analog_init+0x0/0x12 @ 1 [ 5.490723] initcall patch_analog_init+0x0/0x12 returned 0 after 0 usecs [ 5.490728] calling patch_sigmatel_init+0x0/0x12 @ 1 [ 5.490733] initcall patch_sigmatel_init+0x0/0x12 returned 0 after 0 usecs [ 5.490739] calling patch_si3054_init+0x0/0x12 @ 1 [ 5.490744] initcall patch_si3054_init+0x0/0x12 returned 0 after 0 usecs [ 5.490749] calling patch_atihdmi_init+0x0/0x12 @ 1 [ 5.490754] initcall patch_atihdmi_init+0x0/0x12 returned 0 after 0 usecs [ 5.490759] calling patch_cirrus_init+0x0/0x12 @ 1 [ 5.490765] initcall patch_cirrus_init+0x0/0x12 returned 0 after 0 usecs [ 5.490770] calling patch_ca0110_init+0x0/0x12 @ 1 [ 5.490775] initcall patch_ca0110_init+0x0/0x12 returned 0 after 0 usecs [ 5.490780] calling patch_conexant_init+0x0/0x12 @ 1 [ 5.490786] initcall patch_conexant_init+0x0/0x12 returned 0 after 0 usecs [ 5.490790] calling patch_via_init+0x0/0x12 @ 1 [ 5.490795] initcall patch_via_init+0x0/0x12 returned 0 after 0 usecs [ 5.490800] calling patch_nvhdmi_init+0x0/0x12 @ 1 [ 5.490804] initcall patch_nvhdmi_init+0x0/0x12 returned 0 after 0 usecs [ 5.490809] calling patch_intelhdmi_init+0x0/0x12 @ 1 [ 5.490814] initcall patch_intelhdmi_init+0x0/0x12 returned 0 after 0 usecs [ 5.490818] calling alsa_card_azx_init+0x0/0x1b @ 1 [ 5.490903] xen: registering gsi 16 triggering 0 polarity 1 [ 5.490907] xen_allocate_pirq: returning irq 16 for gsi 16 [ 5.490911] xen: --> irq=16 [ 5.490917] Already setup the GSI :16 [ 5.490922] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 5.490982] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 5.502051] sda8 sda9 > [ 6.454092] usb usb4: suspend_rh (auto-stop) [ 6.704091] usb usb5: suspend_rh (auto-stop) [ 6.704129] usb usb6: suspend_rh (auto-stop) [ 7.720754] ehci_hcd 0000:00:1d.7: GetStatus port 6 status 001403 POWER sig=k CSC CONNECT [ 7.722239] sd 0:0:0:0: [sda] Attached SCSI disk [ 7.722249] initcall 6_sd_probe_async+0x0/0x1db returned 0 after 2481539 usecs [ 7.742302] hub 2-0:1.0: port 6: status 0501 change 0001 [ 7.747995] uhci_hcd 0000:00:1a.0: port 2 portsc 008a,00 [ 7.753742] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 7.760069] initcall alsa_card_azx_init+0x0/0x1b returned 0 after 2216057 usecs [ 7.760793] uhci_hcd 0000:00:1d.2: port 2 portsc 008a,00 [ 7.760841] hub 5-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 7.760849] hub 6-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 7.764520] calling alsa_sound_last_init+0x0/0x6f @ 1 [ 7.764520] ALSA device list: [ 7.764520] #0: HDA Intel at 0xd2300000 irq 16 [ 7.764520] initcall alsa_sound_last_init+0x0/0x6f returned 0 after 7940 usecs [ 7.764520] calling flow_cache_init+0x0/0x1a7 @ 1 [ 7.764520] initcall flow_cache_init+0x0/0x1a7 returned 0 after 40 usecs [ 7.764520] calling llc_init+0x0/0x20 @ 1 [ 7.764520] initcall llc_init+0x0/0x20 returned 0 after 1 usecs [ 7.764520] calling snap_init+0x0/0x39 @ 1 [ 7.764520] initcall snap_init+0x0/0x39 returned 0 after 1 usecs [ 7.764520] calling rif_init+0x0/0x85 @ 1 [ 7.764520] initcall rif_init+0x0/0x85 returned 0 after 69 usecs [ 7.847093] hub 2-0:1.0: state 7 ports 6 chg 0040 evt 0000 [ 7.847110] hub 2-0:1.0: port 6, status 0501, change 0000, 480 Mb/s [ 7.847123] ehci_hcd 0000:00:1d.7: port 6 low speed --> companion [ 7.764520] calling blackhole_module_init+0x0/0x12 @ 1 [ 7.764520] initcall blackhole_module_init+0x0/0x12 returned 0 after 0 usecs [ 7.764520] calling nfnetlink_init+0x0/0x60 @ 1 [ 7.764520] Netfilter messages via NETLINK v0.30. [ 7.892864] initcall nfnetlink_init+0x0/0x60 returned 0 after 5147 usecs [ 7.898084] ehci_hcd 0000:00:1d.7: GetStatus port 6 status 003002 POWER OWNER sig=se0 CSC [ 7.898134] hub 2-0:1.0: state 7 ports 6 chg 0000 evt 0040 [ 7.898151] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 7.898160] hub 7-0:1.0: state 7 ports 2 chg 0000 evt 0004 [ 7.898175] uhci_hcd 0000:00:1d.2: port 2 portsc 01a3,00 [ 7.898194] hub 7-0:1.0: port 2, status 0301, change 0001, 1.5 Mb/s [ 7.893602] calling nfnetlink_log_init+0x0/0xd6 @ 1 [ 7.893602] initcall nfnetlink_log_init+0x0/0xd6 returned 0 after 14 usecs [ 7.893602] calling nf_conntrack_standalone_init+0x0/0x12 @ 1 [ 7.893602] nf_conntrack version 0.5.0 (8192 buckets, 32768 max) [ 7.964045] initcall nf_conntrack_standalone_init+0x0/0x12 returned 0 after 6927 usecs [ 7.964762] calling ctnetlink_init+0x0/0x76 @ 1 [ 7.964762] ctnetlink v0.93: registering with nfnetlink. [ 7.964762] initcall ctnetlink_init+0x0/0x76 returned 0 after 5491 usecs [ 7.964762] calling nf_conntrack_ftp_init+0x0/0x1dc @ 1 [ 7.964762] initcall nf_conntrack_ftp_init+0x0/0x1dc returned 0 after 2 usecs [ 8.002091] hub 7-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x301 [ 7.964762] calling nf_conntrack_irc_init+0x0/0x1a8 @ 1 [ 7.964762] initcall nf_conntrack_irc_init+0x0/0x1a8 returned 0 after 1 usecs [ 7.964762] calling nf_conntrack_sip_init+0x0/0x183 @ 1 [ 7.964762] initcall nf_conntrack_sip_init+0x0/0x183 returned 0 after 0 usecs [ 7.964762] calling xt_init+0x0/0x13b @ 1 [ 7.964762] initcall xt_init+0x0/0x13b returned 0 after 1 usecs [ 7.964762] calling tcpudp_mt_init+0x0/0x17 @ 1 [ 7.964762] initcall tcpudp_mt_init+0x0/0x17 returned 0 after 1 usecs [ 7.964762] calling connsecmark_tg_init+0x0/0x12 @ 1 [ 7.964762] initcall connsecmark_tg_init+0x0/0x12 returned 0 after 0 usecs [ 7.964762] calling mark_tg_init+0x0/0x12 @ 1 [ 7.964762] initcall mark_tg_init+0x0/0x12 returned 0 after 0 usecs [ 7.964762] calling nflog_tg_init+0x0/0x12 @ 1 [ 7.964762] initcall nflog_tg_init+0x0/0x12 returned 0 after 0 usecs [ 7.964762] calling secmark_tg_init+0x0/0x12 @ 1 [ 8.104084] usb 7-2: new low speed USB device using uhci_hcd and address 2 [ 7.964762] initcall secmark_tg_init+0x0/0x12 returned 0 after 0 usecs [ 7.964762] calling tcpmss_tg_init+0x0/0x17 @ 1 [ 7.964762] initcall tcpmss_tg_init+0x0/0x17 returned 0 after 0 usecs [ 7.964762] calling conntrack_mt_init+0x0/0x17 @ 1 [ 7.964762] initcall conntrack_mt_init+0x0/0x17 returned 0 after 0 usecs [ 7.964762] calling mark_mt_init+0x0/0x12 @ 1 [ 7.964762] initcall mark_mt_init+0x0/0x12 returned 0 after 0 usecs [ 7.964762] calling policy_mt_init+0x0/0x17 @ 1 [ 7.964762] initcall policy_mt_init+0x0/0x17 returned 0 after 0 usecs [ 7.964762] calling state_mt_init+0x0/0x17 @ 1 [ 7.964762] initcall state_mt_init+0x0/0x17 returned 0 after 0 usecs [ 7.964762] calling sysctl_ipv4_init+0x0/0x4e @ 1 [ 7.964762] initcall sysctl_ipv4_init+0x0/0x4e returned 0 after 1970 usecs [ 7.964762] calling init_syncookies+0x0/0x19 @ 1 [ 7.964762] initcall init_syncookies+0x0/0x19 returned 0 after 35 usecs [ 7.964762] calling tunnel4_init+0x0/0x66 @ 1 [ 7.964762] initcall tunnel4_init+0x0/0x66 returned 0 after 1 usecs [ 7.964762] calling ipv4_netfilter_init+0x0/0x12 @ 1 [ 7.964762] initcall ipv4_netfilter_init+0x0/0x12 returned 0 after 0 usecs [ 7.964762] calling nf_conntrack_l3proto_ipv4_init+0x0/0x14b @ 1 [ 8.236200] initcall nf_conntrack_l3proto_ipv4_init+0x0/0x14b returned 0 after 1312 usecs [ 8.236881] calling nf_nat_init+0x0/0x118 @ 1 [ 8.245602] usb 7-2: skipped 1 descriptor after interface [ 8.250596] usb 7-2: default language 0x0409 [ 8.236881] initcall nf_nat_init+0x0/0x118 returned 0 after 23 usecs [ 8.236881] calling nf_defrag_init+0x0/0x17 @ 1 [ 8.270594] usb 7-2: udev 2, busnum 7, minor = 769 [ 8.270598] usb 7-2: New USB device found, idVendor=04b3, idProduct=3025 [ 8.270603] usb 7-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 8.270607] usb 7-2: Product: USB NetVista Full Width Keyboard [ 8.270611] usb 7-2: Manufacturer: CHICONY [ 8.270835] usb 7-2: usb_probe_device [ 8.270841] usb 7-2: configuration #1 chosen from 1 choice [ 8.273597] usb 7-2: adding 7-2:1.0 (config #1, interface 0) [ 8.273757] usbhid 7-2:1.0: usb_probe_interface [ 8.273761] usbhid 7-2:1.0: usb_probe_interface - got id [ 8.290792] input: CHICONY USB NetVista Full Width Keyboard as /devices/pci0000:00/0000:00:1d.2/usb7/7-2/7-2:1.0/input/input3 [ 8.290813] uhci_hcd 0000:00:1d.2: reserve dev 2 ep81-INT, period 8, phase 4, 118 us [ 8.291122] generic-usb 0003:04B3:3025.0001: input,hidraw0: USB HID v1.10 Keyboard [CHICONY USB NetVista Full Width Keyboard] on usb-0000:00:1d.2-2/input0 [ 8.291197] drivers/usb/core/inode.c: creating file '002' [ 8.291247] hub 1-0:1.0: state 7 ports 4 chg 0004 evt 0000 [ 8.291264] hub 1-0:1.0: port 2, status 0501, change 0000, 480 Mb/s [ 8.291277] ehci_hcd 0000:00:1a.7: port 2 low speed --> companion [ 8.342081] ehci_hcd 0000:00:1a.7: GetStatus port 2 status 003002 POWER OWNER sig=se0 CSC [ 8.342130] hub 1-0:1.0: state 7 ports 4 chg 0000 evt 0004 [ 8.401812] initcall nf_defrag_init+0x0/0x17 returned 0 after 46 usecs [ 8.402766] calling nf_nat_ftp_init+0x0/0x21 @ 1 [ 8.402766] initcall nf_nat_ftp_init+0x0/0x21 returned 0 after 0 usecs [ 8.402766] calling nf_nat_irc_init+0x0/0x21 @ 1 [ 8.402766] initcall nf_nat_irc_init+0x0/0x21 returned 0 after 0 usecs [ 8.402766] calling nf_nat_sip_init+0x0/0x9e @ 1 [ 8.402766] initcall nf_nat_sip_init+0x0/0x9e returned 0 after 0 usecs [ 8.402766] calling ip_tables_init+0x0/0xb8 @ 1 [ 8.402766] ip_tables: (C) 2000-2006 Netfilter Core Team [ 8.454117] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0004 [ 8.454133] uhci_hcd 0000:00:1a.0: port 2 portsc 01a3,00 [ 8.454153] hub 3-0:1.0: port 2, status 0301, change 0001, 1.5 Mb/s [ 8.402766] initcall ip_tables_init+0x0/0xb8 returned 0 after 23093 usecs [ 8.402766] calling iptable_filter_init+0x0/0x69 @ 1 [ 8.402766] initcall iptable_filter_init+0x0/0x69 returned 0 after 7 usecs [ 8.402766] calling iptable_mangle_init+0x0/0x41 @ 1 [ 8.402766] initcall iptable_mangle_init+0x0/0x41 returned 0 after 5 usecs [ 8.402766] calling nf_nat_standalone_init+0x0/0x82 @ 1 [ 8.402766] initcall nf_nat_standalone_init+0x0/0x82 returned 0 after 5 usecs [ 8.402766] calling log_tg_init+0x0/0x29 @ 1 [ 8.402766] initcall log_tg_init+0x0/0x29 returned 0 after 1 usecs [ 8.402766] calling masquerade_tg_init+0x0/0x39 @ 1 [ 8.402766] initcall masquerade_tg_init+0x0/0x39 returned 0 after 3 usecs [ 8.402766] calling reject_tg_init+0x0/0x12 @ 1 [ 8.402766] initcall reject_tg_init+0x0/0x12 returned 0 after 0 usecs [ 8.402766] calling ulog_tg_init+0x0/0xf4 @ 1 [ 8.558089] hub 3-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x301 [ 8.566310] initcall ulog_tg_init+0x0/0xf4 returned 0 after 25 usecs [ 8.567292] calling cubictcp_register+0x0/0x5c @ 1 [ 8.567292] TCP cubic registered [ 8.567292] initcall cubictcp_register+0x0/0x5c returned 0 after 3405 usecs [ 8.567292] calling xfrm_user_init+0x0/0x4a @ 1 [ 8.567292] Initializing XFRM netlink socket [ 8.598476] initcall xfrm_user_init+0x0/0x4a returned 0 after 4466 usecs [ 8.599462] calling inet6_init+0x0/0x2a6 @ 1 [ 8.611075] NET: Registered protocol family 10 [ 8.622104] initcall inet6_init+0x0/0x2a6 returned 0 after 11648 usecs [ 8.622304] calling ah6_init+0x0/0x66 @ 1 [ 8.622304] initcall ah6_init+0x0/0x66 returned 0 after 1 usecs [ 8.622304] calling esp6_init+0x0/0x66 @ 1 [ 8.622304] initcall esp6_init+0x0/0x66 returned 0 after 1 usecs [ 8.622304] calling xfrm6_transport_init+0x0/0x17 @ 1 [ 8.622304] initcall xfrm6_transport_init+0x0/0x17 returned 0 after 0 usecs [ 8.660086] usb 3-2: new low speed USB device using uhci_hcd and address 2 [ 8.622304] calling xfrm6_mode_tunnel_init+0x0/0x17 @ 1 [ 8.622304] initcall xfrm6_mode_tunnel_init+0x0/0x17 returned 0 after 0 usecs [ 8.622304] calling xfrm6_beet_init+0x0/0x17 @ 1 [ 8.622304] initcall xfrm6_beet_init+0x0/0x17 returned 0 after 0 usecs [ 8.622304] calling ip6_tables_init+0x0/0xb8 @ 1 [ 8.622304] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 8.622304] initcall ip6_tables_init+0x0/0xb8 returned 0 after 5595 usecs [ 8.622304] calling ip6table_filter_init+0x0/0x69 @ 1 [ 8.622304] initcall ip6table_filter_init+0x0/0x69 returned 0 after 7 usecs [ 8.622304] calling ip6table_mangle_init+0x0/0x41 @ 1 [ 8.622304] initcall ip6table_mangle_init+0x0/0x41 returned 0 after 7 usecs [ 8.622304] calling nf_conntrack_l3proto_ipv6_init+0x0/0x11a @ 1 [ 8.622304] initcall nf_conntrack_l3proto_ipv6_init+0x0/0x11a returned 0 after 191 usecs [ 8.622304] calling ipv6header_mt6_init+0x0/0x12 @ 1 [ 8.622304] initcall ipv6header_mt6_init+0x0/0x12 returned 0 after 0 usecs [ 8.622304] calling log_tg6_init+0x0/0x29 @ 1 [ 8.622304] initcall log_tg6_init+0x0/0x29 returned 0 after 0 usecs [ 8.622304] calling reject_tg6_init+0x0/0x12 @ 1 [ 8.622304] initcall reject_tg6_init+0x0/0x12 returned 0 after 0 usecs [ 8.622304] calling sit_init+0x0/0x71 @ 1 [ 8.622304] IPv6 over IPv4 tunneling driver [ 8.801788] usb 3-2: skipped 1 descriptor after interface [ 8.802655] initcall sit_init+0x0/0x71 returned 0 after 8145 usecs [ 8.802661] calling packet_init+0x0/0x47 @ 1 [ 8.802665] NET: Registered protocol family 17 [ 8.802679] initcall packet_init+0x0/0x47 returned 0 after 12 usecs [ 8.802683] calling br_init+0x0/0xad @ 1 [ 8.802713] initcall br_init+0x0/0xad returned 0 after 23 usecs [ 8.802717] calling init_rpcsec_gss+0x0/0x4d @ 1 [ 8.802755] initcall init_rpcsec_gss+0x0/0x4d returned 0 after 32 usecs [ 8.802760] calling init_kerberos_module+0x0/0x2f @ 1 [ 8.802773] initcall init_kerberos_module+0x0/0x2f returned 0 after 7 usecs [ 8.802778] calling mce_debugfs_init+0x0/0x3c @ 1 [ 8.802808] initcall mce_debugfs_init+0x0/0x3c returned 0 after 24 usecs [ 8.802813] calling severities_debugfs_init+0x0/0x3c @ 1 [ 8.802826] initcall severities_debugfs_init+0x0/0x3c returned 0 after 7 usecs [ 8.802830] calling acpi_cpufreq_init+0x0/0x10d @ 1 [ 8.802860] initcall acpi_cpufreq_init+0x0/0x10d returned -19 after 24 usecs [ 8.802865] calling hpet_insert_resource+0x0/0x23 @ 1 [ 8.802870] initcall hpet_insert_resource+0x0/0x23 returned 1 after 0 usecs [ 8.802875] initcall hpet_insert_resource+0x0/0x23 returned with error code 1 [ 8.802880] calling update_mp_table+0x0/0x5f9 @ 1 [ 8.802885] initcall update_mp_table+0x0/0x5f9 returned 0 after 0 usecs [ 8.802890] calling lapic_insert_resource+0x0/0x3f @ 1 [ 8.802895] initcall lapic_insert_resource+0x0/0x3f returned -1 after 0 usecs [ 8.802901] initcall lapic_insert_resource+0x0/0x3f returned with error code -1 [ 8.802906] calling init_lapic_nmi_sysfs+0x0/0x39 @ 1 [ 8.802911] initcall init_lapic_nmi_sysfs+0x0/0x39 returned 0 after 0 usecs [ 8.802916] calling io_apic_bug_finalize+0x0/0x1b @ 1 [ 8.802921] initcall io_apic_bug_finalize+0x0/0x1b returned 0 after 0 usecs [ 8.802926] calling check_early_ioremap_leak+0x0/0x65 @ 1 [ 8.802932] initcall check_early_ioremap_leak+0x0/0x65 returned 0 after 0 usecs [ 8.802937] calling pat_memtype_list_init+0x0/0x29 @ 1 [ 8.802951] initcall pat_memtype_list_init+0x0/0x29 returned 0 after 8 usecs [ 8.802957] calling init_oops_id+0x0/0x31 @ 1 [ 8.802968] initcall init_oops_id+0x0/0x31 returned 0 after 6 usecs [ 8.802973] calling disable_boot_consoles+0x0/0x45 @ 1 [ 8.802979] initcall disable_boot_consoles+0x0/0x45 returned 0 after 0 usecs [ 8.802983] calling pm_qos_power_init+0x0/0xca @ 1 [ 9.039271] initcall pm_qos_power_init+0x0/0xca returned 0 after 230743 usecs [ 9.043780] usb 3-2: default language 0x0409 [ 9.040203] calling software_resume+0x0/0x1fc @ 1 [ 9.040203] PM: Resume from disk failed. [ 9.058782] usb 3-2: udev 2, busnum 3, minor = 257 [ 9.058786] usb 3-2: New USB device found, idVendor=093a, idProduct=2510 [ 9.058790] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 9.058795] usb 3-2: Product: USB OPTICAL MOUSE [ 9.058798] usb 3-2: Manufacturer: PIXART [ 9.059021] usb 3-2: usb_probe_device [ 9.059026] usb 3-2: configuration #1 chosen from 1 choice [ 9.071784] usb 3-2: adding 3-2:1.0 (config #1, interface 0) [ 9.071959] usbhid 3-2:1.0: usb_probe_interface [ 9.071963] usbhid 3-2:1.0: usb_probe_interface - got id [ 9.088473] input: PIXART USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:1a.0/usb3/3-2/3-2:1.0/input/input4 [ 9.088914] generic-usb 0003:093A:2510.0002: input,hidraw1: USB HID v1.11 Mouse [PIXART USB OPTICAL MOUSE] on usb-0000:00:1a.0-2/input0 [ 9.088988] drivers/usb/core/inode.c: creating file '002' [ 9.089036] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0004 [ 9.088859] initcall software_resume+0x0/0x1fc returned -2 after 96982 usecs [ 9.088859] initcall software_resume+0x0/0x1fc returned with error code -2 [ 9.088859] calling debugfs_kprobe_init+0x0/0x8a @ 1 [ 9.175909] initcall debugfs_kprobe_init+0x0/0x8a returned 0 after 67 usecs [ 9.176843] calling taskstats_init+0x0/0x95 @ 1 [ 9.176843] registered taskstats version 1 [ 9.176843] initcall taskstats_init+0x0/0x95 returned 0 after 4281 usecs [ 9.176843] calling clear_boot_tracer+0x0/0x2d @ 1 [ 9.176843] initcall clear_boot_tracer+0x0/0x2d returned 0 after 0 usecs [ 9.176843] calling max_swapfiles_check+0x0/0x8 @ 1 [ 9.176843] initcall max_swapfiles_check+0x0/0x8 returned 0 after 0 usecs [ 9.176843] calling random32_reseed+0x0/0xb3 @ 1 [ 9.176843] initcall random32_reseed+0x0/0xb3 returned 0 after 16 usecs [ 9.176843] calling pci_resource_alignment_sysfs_init+0x0/0x19 @ 1 [ 9.176843] initcall pci_resource_alignment_sysfs_init+0x0/0x19 returned 0 after 4 usecs [ 9.176843] calling pci_sysfs_init+0x0/0x51 @ 1 [ 9.257325] initcall pci_sysfs_init+0x0/0x51 returned 0 after 905 usecs [ 9.257977] calling boot_wait_for_devices+0x0/0x30 @ 1 [ 9.257977] initcall boot_wait_for_devices+0x0/0x30 returned 0 after 2 usecs [ 9.257977] calling seqgen_init+0x0/0xf @ 1 [ 9.257977] initcall seqgen_init+0x0/0xf returned 0 after 16 usecs [ 9.257977] calling late_resume_init+0x0/0x11f @ 1 [ 9.257977] Magic number: 11:981:352 [ 9.257977] initcall late_resume_init+0x0/0x11f returned 0 after 4007 usecs [ 9.257977] calling scsi_complete_async_scans+0x0/0x167 @ 1 [ 9.257977] initcall scsi_complete_async_scans+0x0/0x167 returned 0 after 0 usecs [ 9.257977] calling memmap_init+0x0/0xa3 @ 1 [ 9.323726] initcall memmap_init+0x0/0xa3 returned 0 after 115 usecs [ 9.324660] calling pci_mmcfg_late_insert_resources+0x0/0x15f @ 1 [ 9.324660] initcall pci_mmcfg_late_insert_resources+0x0/0x15f returned 0 after 3 usecs [ 9.324660] calling tcp_congestion_default+0x0/0x12 @ 1 [ 9.324660] initcall tcp_congestion_default+0x0/0x12 returned 0 after 1 usecs [ 9.324660] calling ip_auto_config+0x0/0xd55 @ 1 [ 9.324660] initcall ip_auto_config+0x0/0xd55 returned 0 after 8 usecs [ 9.324660] calling initialize_hashrnd+0x0/0x19 @ 1 [ 9.324660] initcall initialize_hashrnd+0x0/0x19 returned 0 after 5 usecs [ 9.382966] async_waiting @ 1 [ 9.383949] async_continuing @ 1 after 0 usec [ 9.383949] Freeing unused kernel memory: 596k freed [ 9.383949] Write protecting the kernel read-only data: 8620k Loading, please wait... mount: mounting none on /dev failed: No such device BusyBox v1.13.3 (Ubuntu 1:1.13.3-1ubuntu11) built-in shell (ash) Enter 'help' for a list of built-in commands. (initramfs) [ 10.704146] hub 4-0:1.0: hub_suspend [ 10.708047] usb usb4: bus auto-suspend [ 10.709019] usb usb4: suspend_rh [ 10.715657] hub 5-0:1.0: hub_suspend [ 10.719542] usb usb5: bus auto-suspend [ 10.720525] usb usb5: suspend_rh [ 10.727128] hub 6-0:1.0: hub_suspend [ 10.731012] usb usb6: bus auto-suspend [ 10.731995] usb usb6: suspend_rh [ 10.738575] hub 2-0:1.0: hub_suspend [ 10.742440] usb usb2: bus auto-suspend [ 10.743426] ehci_hcd 0000:00:1d.7: suspend root hub [ 10.751686] hub 1-0:1.0: hub_suspend [ 10.755550] usb usb1: bus auto-suspend [ 10.756535] ehci_hcd 0000:00:1a.7: suspend root hub