| |
|
 |
|
 |
|
|
|
| |
|
|
xen-devel
Re: [Xen-devel] RE: Windows7 Home, PV drivers (x32_0.11.0.238) stuck dur
Is that a safe way to temporarily disable gplpv? If we hide the
platform device then gplpv shouldn't start, correct?
chris
On Tue, Mar 8, 2011 at 8:27 PM, Konrad Rzeszutek Wilk
<konrad.wilk@xxxxxxxxxx> wrote:
>> > When it is hung like that, can you go into device manager and tell me
>> > what xen devices are loaded?
>>
>> Nothing shows up as Xen. I ran Lavasys Everest to do a report and scanned
>> for anything that said 'Xen'. The only things I found were the DMI fields.
>>
>> Interestingly enough, if I click "Cancel" it is still hung. Are there
>> any installation logs of what it tried to load/install?
>
> It does Cancel, just takes a bit of time. Found out that running
> the installer with /l* Logfile.txt did the trick and saw this:
>
> .. snip..
> DIFXAPP: INFO: No matching devices found in INF
> "C:\Windows\System32\DriverStore\FileRepository\xenpci.inf_x86_neutral_232bc49777803725\xenpci.inf"
> on the Machine.
> DIFXAPP: INFO: No drivers installed. No devices found that match driver(s)
> contained in
> 'C:\Windows\System32\DriverStore\FileRepository\xenpci.inf_x86_neutral_232bc49777803725\xenpci.inf'.
> DIFXAPP: INFO: RETURN: DriverPackageInstallW (0xE000020B)
> DIFXAPP: INFO: The device(s) for which the driver is being installed has not
> been plugged into the computer.
> DIFXAPP: INFO: ENTER: DriverPackageGetPathW
> DIFXAPP: INFO: RETURN: DriverPackageGetPathW (0x7A)
> DIFXAPP: INFO: ENTER: DriverPackageGetPathW
> DIFXAPP: INFO: RETURN: DriverPackageGetPathW (0x0)
> DIFXAPP: INFO: driver store entry for 'C:\Program Files\Xen PV
> Drivers\drivers\xenpci\xenpci.inf' is
> 'C:\Windows\System32\DriverStore\FileRepository\xenpci.inf_x86_neutral_232bc49777803725\xenpci.inf'.
> DIFXAPP: INFO: The component Id '{D6BB9B5F-61F9-4B6E-8FAD-289706F5EBEB}' is
> now set to point to driver store:
> 'C:\Windows\System32\DriverStore\FileRepository\xenpci.inf_x86_neutral_232bc49777803725\xenpci.inf'
> DIFXAPP: INFO: A reboot is not needed to install the component
> '{D6BB9B5F-61F9-4B6E-8FAD-289706F5EBEB}'.
> DIFXAPP: RETURN: InstallDriverPackages() 0 (0x0)
> Action 1:11:12: WaitForDevices.
>
> And sure enough I did not have a Xen PCI platform device.
> The reason being that I had this in my guest configuration file:
>
> #-----------------------------------------------------------------------------
> # Enable/disable xen platform PCI device, default=1 (enabled)
> xen_platform_pci=0
>
> Changing it to 1 made the installer work. After two reboots
> my Windows 7 guest is running with the PV drivers.
>
>
> _______________________________________________
> Xen-devel mailing list
> Xen-devel@xxxxxxxxxxxxxxxxxxx
> http://lists.xensource.com/xen-devel
>
_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-devel
|
|
|
| |
|
Home