Linux version 2.6.18.8-xen (root@en04bl2vg0) (gcc version 4.1.3 20080704 (prerelease) (Debian 4.1.2-25)) #2 SMP Wed Jan 26 09:57:02 VET 2011 EFI v1.00 by Xen/ia64: SALsystab=0x2178 ACPI 2.0=0x3fdee000 SMBIOS=0x3e52a000 HCDP=0x3fdec000 booting generic kernel on platform hpzx1 PCDP: v3 at 0x3fdec000 PCDP: VGA console ACPI: RSDP (v002 HP ) @ 0x000000003fdee000 ACPI: XSDT (v001 HP BL870c 0x00000000 HP 0x00000000) @ 0x000000003fdee02c ACPI: FADT (v003 HP BL870c 0x00000000 HP 0x00000000) @ 0x000000003fdfecd8 ACPI: SPCR (v001 HP 0x00000000 HP 0x00000000) @ 0x000000003fdfee10 ACPI: DBGP (v001 HP BL870c 0x00000000 HP 0x00000000) @ 0x000000003fdfee60 ACPI: MADT (v001 HP BL870c 0x00000000 HP 0x00000000) @ 0x000000003fdff280 ACPI: SPMI (v004 HP BL870c 0x00000000 HP 0x00000000) @ 0x000000003fdfee98 ACPI: CPEP (v001 HP BL870c 0x00000000 HP 0x00000000) @ 0x000000003fdff150 ACPI: SSDT (v001 HP BL870c 0x00000006 INTL 0x20050309) @ 0x000000003fdfa468 ACPI: SSDT (v001 HP BL870c 0x00000006 INTL 0x20050309) @ 0x000000003fdfa928 ACPI: SSDT (v001 HP BL870c 0x00000006 INTL 0x20050309) @ 0x000000003fdfad88 ACPI: SSDT (v001 HP BL870c 0x00000006 INTL 0x20050309) @ 0x000000003fdfaf18 ACPI: SSDT (v001 HP BL870c 0x00000006 INTL 0x20050309) @ 0x000000003fdfbdd8 ACPI: SSDT (v001 HP BL870c 0x00000006 INTL 0x20050309) @ 0x000000003fdfcc98 ACPI: SSDT (v001 HP BL870c 0x00000006 INTL 0x20050309) @ 0x000000003fdfdb58 ACPI: SSDT (v001 HP BL870c 0x00000006 INTL 0x20050309) @ 0x000000003fdfdc98 ACPI: SSDT (v001 HP BL870c 0x00000006 INTL 0x20050309) @ 0x000000003fdfdd88 ACPI: SSDT (v001 HP BL870c 0x00000006 INTL 0x20050309) @ 0x000000003fdfdec8 ACPI: SSDT (v001 HP BL870c 0x00000006 INTL 0x20050309) @ 0x000000003fdfdfb8 ACPI: SSDT (v001 HP BL870c 0x00000006 INTL 0x20050309) @ 0x000000003fdfe0f8 ACPI: SSDT (v001 HP BL870c 0x00000006 INTL 0x20050309) @ 0x000000003fdfe1e8 ACPI: SSDT (v001 HP BL870c 0x00000006 INTL 0x20050309) @ 0x000000003fdfe328 ACPI: SSDT (v001 HP BL870c 0x00000006 INTL 0x20050309) @ 0x000000003fdfe418 ACPI: SSDT (v001 HP BL870c 0x00000006 INTL 0x20050309) @ 0x000000003fdfe558 ACPI: SSDT (v001 HP BL870c 0x00000006 INTL 0x20050309) @ 0x000000003fdfe648 ACPI: SSDT (v001 HP BL870c 0x00000006 INTL 0x20050309) @ 0x000000003fdfe788 ACPI: SSDT (v001 HP BL870c 0x00000006 INTL 0x20050309) @ 0x000000003fdfe878 ACPI: SSDT (v001 HP BL870c 0x00000006 INTL 0x20050309) @ 0x000000003fdfe9b8 ACPI: SSDT (v001 HP BL870c 0x00000006 INTL 0x20050309) @ 0x000000003fdfeaa8 ACPI: SSDT (v001 HP BL870c 0x00000006 INTL 0x20050309) @ 0x000000003fdfebe8 ACPI: DSDT (v001 HP BL870c 0x00000007 INTL 0x20050309) @ 0x0000000000000000 Initial ramdisk at: 0xe0000000052bc000 (6891685 bytes) SAL 0.1: Xen/ia64 Xen/ia64 version 0.0 SAL: AP wakeup using external interrupt vector 0xf3 No logical to physical processor mapping available ACPI: Local APIC address c0000000fee00000 GSI 25 (level, low) -> CPU 0 (0x0000) vector 48 4 CPUs available, 16 CPUs total Running on Xen! start_info_pfn=0x14ae nr_pages=3118504 flags=0x203 MCA related initialization done Virtual mem_map starts at 0xa0007fff1f35c000 On node 0 totalpages: 3114727 DMA zone: 60135 pages, LIFO batch:7 Normal zone: 3054592 pages, LIFO batch:7 SMP: Allowing 16 CPUs, 12 hotplug CPUs Built 1 zonelists. Total pages: 3114727 Kernel command line: root=/dev/mapper/en4bl2vg0-raiz nosmp ro PID hash table entries: 4096 (order: 12, 32768 bytes) CPU 0: base freq=266.111MHz, ITC ratio=6/4, ITC freq=399.167MHz+/-150ppm Console: colour VGA+ 80x25 Memory: 49662048k/49835632k available (10409k code, 199520k reserved, 4415k data, 720k init) McKinley Errata 9 workaround not needed; disabling it Calibrating delay loop... 3185.04 BogoMIPS (lpj=15925248) Dentry cache hash table entries: 8388608 (order: 12, 67108864 bytes) Inode-cache hash table entries: 4194304 (order: 11, 33554432 bytes) Mount-cache hash table entries: 1024 ACPI: Core revision 20060707 Boot processor id 0x0/0x0 SMP mode deactivated. Brought up 1 CPUs Total of 1 processors activated (3185.04 BogoMIPS). migration_cost=0 checking if image is initramfs... it is Freeing initrd memory: 6720kB freed DMI 2.4 present. NET: Registered protocol family 16 ACPI: bus type pci registered ACPI: Interpreter enabled ACPI: Using IOSAPIC for interrupt routing ACPI: PCI Root Bridge [L000] (0000:00) ACPI: PCI Interrupt Routing Table [\_SB_.SBA0.L000._PRT] ACPI: PCI Root Bridge [L001] (0000:01) ACPI: PCI Interrupt Routing Table [\_SB_.SBA0.L001._PRT] ACPI: PCI Root Bridge [L002] (0000:02) ACPI: PCI Interrupt Routing Table [\_SB_.SBA0.L002._PRT] ACPI: PCI Root Bridge [L003] (0000:03) ACPI: PCI Interrupt Routing Table [\_SB_.SBA0.L003._PRT] ACPI: PCI Root Bridge [L004] (0000:05) ACPI: PCI Interrupt Routing Table [\_SB_.SBA0.L004._PRT] ACPI: PCI Root Bridge [L007] (0000:07) ACPI: PCI Interrupt Routing Table [\_SB_.SBA0.L007._PRT] xen_mem: Initialising balloon driver. IOC: zx2 2.0 HPA 0xfed01000 IOVA space 1024Mb at 0x40000000 NET: Registered protocol family 2 IP route cache hash table entries: 2097152 (order: 10, 16777216 bytes) TCP established hash table entries: 8388608 (order: 13, 134217728 bytes) TCP bind hash table entries: 65536 (order: 6, 1048576 bytes) TCP: Hash tables configured (established 8388608 bind 65536) TCP reno registered perfmon: version 2.0 IRQ 238 perfmon: Montecito PMU detected, 27 PMCs, 35 PMDs, 12 counters (47 bits) PAL Information Facility v0.5 perfmon: added sampling format default_format perfmon_default_smpl: default_format v2.0 registered Installing knfsd (copyright (C) 1996 okir@xxxxxxxxxxxx). fuse init (API version 7.7) SGI XFS with large block/inode numbers, no debug enabled Initializing Cryptographic API io scheduler noop registered io scheduler anticipatory registered (default) io scheduler deadline registered io scheduler cfq registered pci_hotplug: PCI Hot Plug PCI Core version: 0.5 acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 ACPI: Power Button (FF) [PWRF] ACPI: Sleep Button (FF) [SLPF] ACPI Exception (acpi_processor-0721): AE_NOT_FOUND, Processor Device is not present [20060707] ACPI Exception (acpi_processor-0721): AE_NOT_FOUND, Processor Device is not present [20060707] ACPI Exception (acpi_processor-0721): AE_NOT_FOUND, Processor Device is not present [20060707] ACPI Exception (acpi_processor-0721): AE_NOT_FOUND, Processor Device is not present [20060707] ACPI Exception (acpi_processor-0721): AE_NOT_FOUND, Processor Device is not present [20060707] ACPI Exception (acpi_processor-0721): AE_NOT_FOUND, Processor Device is not present [20060707] ACPI Exception (acpi_processor-0721): AE_NOT_FOUND, Processor Device is not present [20060707] ACPI Exception (acpi_processor-0721): AE_NOT_FOUND, Processor Device is not present [20060707] ACPI Exception (acpi_processor-0721): AE_NOT_FOUND, Processor Device is not present [20060707] ACPI Exception (acpi_processor-0721): AE_NOT_FOUND, Processor Device is not present [20060707] ACPI Exception (acpi_processor-0721): AE_NOT_FOUND, Processor Device is not present [20060707] ACPI Exception (acpi_processor-0721): AE_NOT_FOUND, Processor Device is not present [20060707] ACPI: Thermal Zone [THM0] (27 C) EFI Time Services Driver v0.4 Linux agpgart interface v0.101 (c) Dave Jones [drm] Initialized drm 1.0.1 20051102 RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize loop: loaded (max 8 devices) HP CISS Driver (v 3.6.10) Intel(R) PRO/1000 Network Driver - version 7.1.9-k4 Copyright (c) 1999-2006 Intel Corporation. tg3.c:v3.65 (August 07, 2006) GSI 27 (level, low) -> CPU 0 (0x0000) vector 49 ACPI: PCI Interrupt 0000:01:01.0[A] -> GSI 27 (level, low) -> IRQ 49 eth0: Tigon3 [partno(BCM95700A6) rev 2100 PHY(serdes)] (PCIX:133MHz:64-bit) 10/100/1000BaseT Ethernet 00:1b:78:7c:a4:98 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] Split[0] WireSpeed[0] TSOcap[1] eth0: dma_rwctrl[769f4000] dma_mask[64-bit] GSI 28 (level, low) -> CPU 0 (0x0000) vector 50 ACPI: PCI Interrupt 0000:01:01.1[B] -> GSI 28 (level, low) -> IRQ 50 eth1: Tigon3 [partno(BCM95700A6) rev 2100 PHY(serdes)] (PCIX:133MHz:64-bit) 10/100/1000BaseT Ethernet 00:1b:78:7c:a4:99 eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] Split[0] WireSpeed[0] TSOcap[1] eth1: dma_rwctrl[769f4000] dma_mask[64-bit] GSI 40 (level, low) -> CPU 0 (0x0000) vector 51 ACPI: PCI Interrupt 0000:02:02.0[A] -> GSI 40 (level, low) -> IRQ 51 eth2: Tigon3 [partno(BCM95700A6) rev 2100 PHY(serdes)] (PCIX:66MHz:64-bit) 10/100/1000BaseT Ethernet 00:1b:78:7c:a4:9a eth2: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] Split[0] WireSpeed[0] TSOcap[1] eth2: dma_rwctrl[769f0000] dma_mask[64-bit] GSI 41 (level, low) -> CPU 0 (0x0000) vector 52 ACPI: PCI Interrupt 0000:02:02.1[B] -> GSI 41 (level, low) -> IRQ 52 eth3: Tigon3 [partno(BCM95700A6) rev 2100 PHY(serdes)] (PCIX:66MHz:64-bit) 10/100/1000BaseT Ethernet 00:1b:78:7c:a4:9b eth3: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] Split[0] WireSpeed[0] TSOcap[1] eth3: dma_rwctrl[769f0000] dma_mask[64-bit] tun: Universal TUN/TAP device driver, 1.6 tun: (C) 1999-2004 Max Krasnyansky arcnet loaded. netconsole: not configured, aborting Linux video capture interface: v2.00 Xen virtual console successfully installed as xvc0 Event-channel device installed. blktap_device_init: blktap device major 254 blktap_ring_init: blktap ring major: 253 netfront: Initialising virtual ethernet driver. Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx ide-floppy driver 0.99.newide mice: PS/2 mouse device common for all mice i2c /dev entries driver EFI Variables Facility v0.08 2004-May-17 IPv4 over IPv4 tunneling driver GRE over IPv4 tunneling driver TCP bic registered NET: Registered protocol family 1 NET: Registered protocol family 17 Bridge firewalling registered xen privcmd uses pseudo physical addr range [0x10100000000, 0x3ffff000000] (3141616MB) p2m_size != page_size PCI IO multiplexer device installed. Freeing unused kernel memory: 720kB freed usbcore: registered new driver usbfs usbcore: registered new driver hub ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) GSI 17 (level, low) -> CPU 0 (0x0000) vector 53 ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 17 (level, low) -> IRQ 53 ohci_hcd 0000:00:02.0: OHCI Host Controller ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1 ohci_hcd 0000:00:02.0: irq 53, io mem 0x88032000 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 3 ports detected SCSI subsystem initialized Fusion MPT base driver 3.04.01 Copyright (c) 1999-2005 LSI Logic Corporation Fusion MPT SAS Host driver 3.04.01 GSI 18 (level, low) -> CPU 0 (0x0000) vector 54 ACPI: PCI Interrupt 0000:00:02.1[B] -> GSI 18 (level, low) -> IRQ 54 ohci_hcd 0000:00:02.1: OHCI Host Controller ohci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 2 ohci_hcd 0000:00:02.1: irq 54, io mem 0x88031000 QLogic Fibre Channel HBA Driver usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected GSI 19 (level, low) -> CPU 0 (0x0000) vector 55 ACPI: PCI Interrupt 0000:00:02.2[C] -> GSI 19 (level, low) -> IRQ 55 ehci_hcd 0000:00:02.2: EHCI Host Controller ehci_hcd 0000:00:02.2: new USB bus registered, assigned bus number 3 ehci_hcd 0000:00:02.2: irq 55, io mem 0x88030000 ehci_hcd 0000:00:02.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 5 ports detected usb 1-1: new full speed USB device using ohci_hcd and address 2 GSI 38 (level, low) -> CPU 0 (0x0000) vector 56 ACPI: PCI Interrupt 0000:02:01.0[A] -> GSI 38 (level, low) -> IRQ 56 mptbase: Initiating ioc0 bringup usb 1-1: new full speed USB device using ohci_hcd and address 3 usb 1-1: configuration #1 chosen from 1 choice ioc0: SAS1068: Capabilities={Initiator} usb 1-2: new full speed USB device using ohci_hcd and address 4 usb 1-2: configuration #1 chosen from 1 choice hub 1-2:1.0: USB hub found hub 1-2:1.0: 4 ports detected usb 1-2.4: new full speed USB device using ohci_hcd and address 5 usb 1-2.4: configuration #1 chosen from 1 choice usbcore: registered new driver hiddev input: HP Virtual Management Device as /class/input/input0 input: USB HID v1.11 Keyboard [HP Virtual Management Device] on usb-0000:00:02.0-1 input: HP Virtual Management Device as /class/input/input1 input: USB HID v1.01 Mouse [HP Virtual Management Device] on usb-0000:00:02.0-1 input: Sun USB Keyboard as /class/input/input2 input: USB HID v1.10 Keyboard [Sun USB Keyboard] on usb-0000:00:02.0-2.4 usbcore: registered new driver usbhid /root/xen-4.0.1/linux-2.6.18-xen.hg/drivers/usb/input/hid-core.c: v2.6:USB HID core driver scsi0 : ioc0: LSISAS1068, FwRev=01172100h, Ports=1, MaxQ=163, IRQ=56 Vendor: HP Model: DG146BB976 Rev: HPDC Type: Direct-Access ANSI SCSI revision: 05 Vendor: HP Model: DG146BB976 Rev: HPDC Type: Direct-Access ANSI SCSI revision: 05 Vendor: HP Model: IR Volume Rev: HP01 Type: Direct-Access ANSI SCSI revision: 02 GSI 56 (level, low) -> CPU 0 (0x0000) vector 57 ACPI: PCI Interrupt 0000:06:00.0[A] -> GSI 56 (level, low) -> IRQ 57 qla2xxx 0000:06:00.0: Found an ISP2432, irq 57, iobase 0xc0000000c0084000 qla2xxx 0000:06:00.0: Configuring PCI space... qla2xxx 0000:06:00.0: Configure NVRAM parameters... qla2xxx 0000:06:00.0: Verifying loaded RISC code... SCSI device sda: 286511104 512-byte hdwr sectors (146694 MB) sda: Write Protect is off sda: Mode Sense: 03 00 00 08 SCSI device sda: drive cache: write through SCSI device sda: 286511104 512-byte hdwr sectors (146694 MB) sda: Write Protect is off sda: Mode Sense: 03 00 00 08 SCSI device sda: drive cache: write through sda: sda1 sda2 sda3 sd 0:1:1:0: Attached scsi disk sda qla2xxx 0000:06:00.0: Firmware image unavailable. qla2xxx 0000:06:00.0: Firmware images can be retrieved from: ftp://ftp.qlogic.com/outgoing/linux/firmware/. qla2xxx 0000:06:00.0: Attempting to load (potentially outdated) firmware from flash. qla2xxx 0000:06:00.0: Allocated (64 KB) for EFT... qla2xxx 0000:06:00.0: Allocated (1413 KB) for firmware dump... qla2xxx 0000:06:00.0: Waiting for LIP to complete... qla2xxx 0000:06:00.0: LOOP UP detected (4 Gbps). qla2xxx 0000:06:00.0: Topology - (F_Port), Host Loop address 0x0 scsi1 : qla2xxx qla2xxx 0000:06:00.0: QLogic Fibre Channel HBA Driver: 8.01.07-k1 QLogic QMH2462 - SBUS to 2Gb FC, Dual Channel ISP2432: PCIe (2.5Gb/s x4) @ 0000:06:00.0 hdma+, host#=1, fw=4.00.90 [IP] GSI 57 (level, low) -> CPU 0 (0x0000) vector 58 ACPI: PCI Interrupt 0000:06:00.1[B] -> GSI 57 (level, low) -> IRQ 58 Vendor: HP Model: HSV210 Rev: 6220 Type: RAID ANSI SCSI revision: 05 Vendor: HP Model: HSV210 Rev: 6220 Type: Direct-Access ANSI SCSI revision: 05 SCSI device sdb: 104857600 512-byte hdwr sectors (53687 MB) sdb: Write Protect is off sdb: Mode Sense: 97 00 10 08 SCSI device sdb: drive cache: write through w/ FUA SCSI device sdb: 104857600 512-byte hdwr sectors (53687 MB) sdb: Write Protect is off sdb: Mode Sense: 97 00 10 08 SCSI device sdb: drive cache: write through w/ FUA sdb: unknown partition table sd 1:0:0:1: Attached scsi disk sdb Vendor: HP Model: HSV210 Rev: 6220 Type: RAID ANSI SCSI revision: 05 Vendor: HP Model: HSV210 Rev: 6220 Type: Direct-Access ANSI SCSI revision: 05 SCSI device sdc: 104857600 512-byte hdwr sectors (53687 MB) sdc: Write Protect is off sdc: Mode Sense: 97 00 10 08 SCSI device sdc: drive cache: write through w/ FUA qla2xxx 0000:06:00.1: Found an ISP2432, irq 58, iobase 0xc0000000c0080000 qla2xxx 0000:06:00.1: Configuring PCI space... qla2xxx 0000:06:00.1: Configure NVRAM parameters... qla2xxx 0000:06:00.1: Verifying loaded RISC code... SCSI device sdc: 104857600 512-byte hdwr sectors (53687 MB) sdc: Write Protect is off sdc: Mode Sense: 97 00 10 08 SCSI device sdc: drive cache: write through w/ FUA sdc: unknown partition table sd 1:0:1:1: Attached scsi disk sdc Vendor: HP Model: HSV210 Rev: 6220 Type: RAID ANSI SCSI revision: 05 Vendor: HP Model: HSV210 Rev: 6220 Type: Direct-Access ANSI SCSI revision: 05 SCSI device sdd: 104857600 512-byte hdwr sectors (53687 MB) sdd: Write Protect is off sdd: Mode Sense: 97 00 10 08 SCSI device sdd: drive cache: write through w/ FUA SCSI device sdd: 104857600 512-byte hdwr sectors (53687 MB) sdd: Write Protect is off sdd: Mode Sense: 97 00 10 08 SCSI device sdd: drive cache: write through w/ FUA sdd: unknown partition table sd 1:0:2:1: Attached scsi disk sdd qla2xxx 0000:06:00.1: Firmware image unavailable. qla2xxx 0000:06:00.1: Firmware images can be retrieved from: ftp://ftp.qlogic.com/outgoing/linux/firmware/. qla2xxx 0000:06:00.1: Attempting to load (potentially outdated) firmware from flash. qla2xxx 0000:06:00.1: Allocated (64 KB) for EFT... qla2xxx 0000:06:00.1: Allocated (1413 KB) for firmware dump... qla2xxx 0000:06:00.1: Waiting for LIP to complete... qla2xxx 0000:06:00.1: LOOP UP detected (4 Gbps). qla2xxx 0000:06:00.1: Topology - (F_Port), Host Loop address 0x0 scsi2 : qla2xxx qla2xxx 0000:06:00.1: QLogic Fibre Channel HBA Driver: 8.01.07-k1 QLogic QMH2462 - SBUS to 2Gb FC, Dual Channel ISP2432: PCIe (2.5Gb/s x4) @ 0000:06:00.1 hdma+, host#=2, fw=4.00.90 [IP] GSI 63 (level, low) -> CPU 0 (0x0000) vector 59 ACPI: PCI Interrupt 0000:08:00.0[A] -> GSI 63 (level, low) -> IRQ 59 Vendor: HP Model: HSV210 Rev: 6220 Type: RAID ANSI SCSI revision: 05 Vendor: HP Model: HSV210 Rev: 6220 Type: RAID ANSI SCSI revision: 05 Vendor: HP Model: HSV210 Rev: 6220 Type: RAID ANSI SCSI revision: 05 qla2xxx 0000:08:00.0: Found an ISP2432, irq 59, iobase 0xc0000000f0084000 qla2xxx 0000:08:00.0: Configuring PCI space... qla2xxx 0000:08:00.0: Configure NVRAM parameters... qla2xxx 0000:08:00.0: Verifying loaded RISC code... qla2xxx 0000:08:00.0: Firmware image unavailable. qla2xxx 0000:08:00.0: Firmware images can be retrieved from: ftp://ftp.qlogic.com/outgoing/linux/firmware/. qla2xxx 0000:08:00.0: Attempting to load (potentially outdated) firmware from flash. qla2xxx 0000:08:00.0: Allocated (64 KB) for EFT... qla2xxx 0000:08:00.0: Allocated (1413 KB) for firmware dump... qla2xxx 0000:08:00.0: Waiting for LIP to complete... qla2xxx 0000:08:00.0: LOOP UP detected (4 Gbps). qla2xxx 0000:08:00.0: Topology - (F_Port), Host Loop address 0x0 scsi3 : qla2xxx qla2xxx 0000:08:00.0: QLogic Fibre Channel HBA Driver: 8.01.07-k1 QLogic QMH2462 - SBUS to 2Gb FC, Dual Channel ISP2432: PCIe (2.5Gb/s x4) @ 0000:08:00.0 hdma+, host#=3, fw=4.00.90 [IP] GSI 64 (level, low) -> CPU 0 (0x0000) vector 60 ACPI: PCI Interrupt 0000:08:00.1[B] -> GSI 64 (level, low) -> IRQ 60 Vendor: HP Model: HSV210 Rev: 6220 Type: RAID ANSI SCSI revision: 05 Vendor: HP Model: HSV210 Rev: 6220 Type: Direct-Access ANSI SCSI revision: 05 SCSI device sde: 104857600 512-byte hdwr sectors (53687 MB) sde: Write Protect is off sde: Mode Sense: 97 00 10 08 SCSI device sde: drive cache: write through w/ FUA SCSI device sde: 104857600 512-byte hdwr sectors (53687 MB) sde: Write Protect is off sde: Mode Sense: 97 00 10 08 SCSI device sde: drive cache: write through w/ FUA sde: unknown partition table sd 3:0:0:1: Attached scsi disk sde Vendor: HP Model: HSV210 Rev: 6220 Type: RAID ANSI SCSI revision: 05 Vendor: HP Model: HSV210 Rev: 6220 Type: Direct-Access ANSI SCSI revision: 05 SCSI device sdf: 104857600 512-byte hdwr sectors (53687 MB) sdf: Write Protect is off sdf: Mode Sense: 97 00 10 08 SCSI device sdf: drive cache: write through w/ FUA SCSI device sdf: 104857600 512-byte hdwr sectors (53687 MB) sdf: Write Protect is off sdf: Mode Sense: 97 00 10 08 SCSI device sdf: drive cache: write through w/ FUA sdf: unknown partition table sd 3:0:1:1: Attached scsi disk sdf Vendor: HP Model: HSV210 Rev: 6220 Type: RAID ANSI SCSI revision: 05 Vendor: HP Model: HSV210 Rev: 6220 Type: Direct-Access ANSI SCSI revision: 05 SCSI device sdg: 104857600 512-byte hdwr sectors (53687 MB) sdg: Write Protect is off sdg: Mode Sense: 97 00 10 08 SCSI device sdg: drive cache: write through w/ FUA SCSI device sdg: 104857600 512-byte hdwr sectors (53687 MB) sdg: Write Protect is off sdg: Mode Sense: 97 00 10 08 SCSI device sdg: drive cache: write through w/ FUA sdg: unknown partition table sd 3:0:2:1: Attached scsi disk sdg qla2xxx 0000:08:00.1: Found an ISP2432, irq 60, iobase 0xc0000000f0080000 qla2xxx 0000:08:00.1: Configuring PCI space... qla2xxx 0000:08:00.1: Configure NVRAM parameters... qla2xxx 0000:08:00.1: Verifying loaded RISC code... qla2xxx 0000:08:00.1: Firmware image unavailable. qla2xxx 0000:08:00.1: Firmware images can be retrieved from: ftp://ftp.qlogic.com/outgoing/linux/firmware/. qla2xxx 0000:08:00.1: Attempting to load (potentially outdated) firmware from flash. qla2xxx 0000:08:00.1: Allocated (64 KB) for EFT... qla2xxx 0000:08:00.1: Allocated (1413 KB) for firmware dump... qla2xxx 0000:08:00.1: Waiting for LIP to complete... qla2xxx 0000:08:00.1: LOOP UP detected (4 Gbps). qla2xxx 0000:08:00.1: Topology - (F_Port), Host Loop address 0x0 scsi4 : qla2xxx qla2xxx 0000:08:00.1: QLogic Fibre Channel HBA Driver: 8.01.07-k1 QLogic QMH2462 - SBUS to 2Gb FC, Dual Channel ISP2432: PCIe (2.5Gb/s x4) @ 0000:08:00.1 hdma+, host#=4, fw=4.00.90 [IP] device-mapper: ioctl: 4.7.0-ioctl (2006-06-24) initialised: dm-devel@xxxxxxxxxx kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. udevd version 125 started Adding 7812464k swap on /dev/sda2. Priority:-1 extents:1 across:7812464k EXT3 FS on dm-0, internal journal kjournald starting. Commit interval 5 seconds EXT3 FS on dm-1, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on dm-2, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on dm-3, internal journal EXT3-fs: mounted filesystem with ordered data mode. PM: Writing back config space on device 0000:01:01.0 at offset b (was 164814e4, writing 132b103c) PM: Writing back config space on device 0000:01:01.0 at offset 3 (was 804000, writing 804020) PM: Writing back config space on device 0000:01:01.0 at offset 2 (was 2000000, writing 2000010) PM: Writing back config space on device 0000:01:01.0 at offset 1 (was 2b00000, writing 2b00146) PM: Writing back config space on device 0000:01:01.0 at offset 0 (was 164914e4, writing 16a814e4) tg3: eth0: Link is up at 1000 Mbps, full duplex. tg3: eth0: Flow control is on for TX and on for RX.