WARNING - OLD ARCHIVES

This is an archived copy of the Xen.org mailing list, which we have preserved to ensure that existing links to archives are not broken. The live archive, which contains the latest emails, can be found at http://lists.xen.org/
   
 
 
Xen 
 
Home Products Support Community News
 
   
 

xen-devel

Re: [Xen-devel] Xen PCI passthrough & OpenWRT domU

To: xen-devel@xxxxxxxxxxxxxxxxxxx
Subject: Re: [Xen-devel] Xen PCI passthrough & OpenWRT domU
From: Jean Baptiste Favre <xen-devel@xxxxxxxxxxx>
Date: Wed, 29 Dec 2010 14:11:41 +0100
Delivery-date: Wed, 29 Dec 2010 05:11:47 -0800
Envelope-to: www-data@xxxxxxxxxxxxxxxxxxx
In-reply-to: <20101229120735.GT2754@xxxxxxxxxxx>
List-help: <mailto:xen-devel-request@lists.xensource.com?subject=help>
List-id: Xen developer discussion <xen-devel.lists.xensource.com>
List-post: <mailto:xen-devel@lists.xensource.com>
List-subscribe: <http://lists.xensource.com/mailman/listinfo/xen-devel>, <mailto:xen-devel-request@lists.xensource.com?subject=subscribe>
List-unsubscribe: <http://lists.xensource.com/mailman/listinfo/xen-devel>, <mailto:xen-devel-request@lists.xensource.com?subject=unsubscribe>
References: <4D1B15B1.5040900@xxxxxxxxxxx> <20101229120735.GT2754@xxxxxxxxxxx>
Reply-to: xen-devel@xxxxxxxxxxxxxxxxxxx
Sender: xen-devel-bounces@xxxxxxxxxxxxxxxxxxx
User-agent: Mozilla/5.0 (X11; U; Linux i686; en-US; rv:1.9.2.12) Gecko/20101110 Lightning/1.0b2 Icedove/3.1.6
Hello Pasi,

Le 29/12/2010 13:07, Pasi Kärkkäinen a écrit :
> On Wed, Dec 29, 2010 at 12:04:17PM +0100, Jean Baptiste Favre wrote:
>> Hello,
>> I'm trying to make Openwrt running as domU with network cards PCI
>> passthrough.
>>
>> First part is OK, OpenWRT runs fine as x86 PV domU, but not PCI passthrough.
>>
>> Dom0 runs debian Xen packages.
>> # cat /proc/cmdline
>> placeholder root=/dev/mapper/system-root ro console=tty0 console=hvc0
>> console=ttyS0,115200n8 xen-pciback.permissive xen-pciback.hide=(04:00.0)
>> pci=resource_alignment=04:00.0 quiet
>>
>> # lspci
>> ...
>> 04:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8056 PCI-E
>> Gigabit Ethernet Controller (rev 12)
>>
>> # uname -a
>> Linux remus 2.6.32-5-xen-amd64 #1 SMP Fri Dec 10 17:41:50 UTC 2010
>> x86_64 GNU/Linux
>>
>> OpenWRT uses upstream kernel 2.6.32.27 (but I also tested 2.6.35.9
>> without any changes).
>>
> 
> Upstream Linux 2.6.32.27 doesn't have xen-pcifront driver.
> Upstream 2.6.35.9 doesn't have it either.
> 
> xen-pcifront driver was merged to upcoming upstream 2.6.37 kernel.

So, I'll try with 2.6.37 :)


>> domU informations:
>> # cat /proc/cmdline
>> root=/dev/xvda2 rw swiotlb=force console=hvc0 xencons=tty
>>
>> # lspci
>> [empty]
>>
> 
> You should see the PCI device with lspci. 
> I guess you don't have xen-pcifront driver in use.

That's what I think, but do not know how to check xen-pcifront use


>> # dmesg | grep -i pci
>> Allocating PCI resources starting at 10000000 (gap: 10000000:f0000000)
>> PCI: Fatal: No config space access function found
>> PCI: System does not support PCI
>> PCI: System does not support PCI
>> PCI: CLS 0 bytes, default 128
>> XENBUS: Device with no driver: device/pci/0
>>
>> # dmesg | grep -i xen
>>  Xen: 0000000000000000 - 00000000000a0000 (usable)
>>  Xen: 00000000000a0000 - 0000000000100000 (reserved)
>>  Xen: 0000000000100000 - 0000000010000000 (usable)
>>   #0 [00014c6000 - 00014d4000]   XEN PAGETABLES ==> [00014c6000 -
>> 00014d4000]
>>   #3 [0001483000 - 00014c6000]   XEN START INFO ==> [0001483000 -
>> 00014c6000]
>> Booting paravirtualized kernel on Xen
>> Xen version: 4.0.1 (preserve-AD)
>> Xen: using vcpu_info placement
>> Kernel command line: root=/dev/xvda2 rw swiotlb=force console=hvc0
>> xencons=tty
>> Xen: using vcpuop timer interface
>> installing Xen timer for CPU 0
>> xen_balloon: Initialising balloon driver.
>> Switching to clocksource xen
>> Initialising Xen virtual ethernet driver.
>> XENBUS: Device with no driver: device/pci/0
>> XENBUS: Device with no driver: device/console/0
>>
>> So, it seems that domU sees PCI device (and sky2 module is loaded), but
>> do not recognize it.
>> I have tried to compile PCI frontend driver, which is not by default,
>> but not sure I succeeded. How can I check it ?
>>
>> Another question, are there any requirement in terms of kernel version
>> regarding the version of Xen I use ? If yes, how can I check that too ?
>>
> 
> xen-pcifront driver is required in the domU kernel.
> 
>> Sorry for long email, but I also ask it on OpenWRT devel list without
>> answer for now.
> 
> See: http://wiki.xensource.com/xenwiki/XenPCIpassthrough

Already saw this page. This is my reference for these tries :)


Thanks a lot for answer,
JB

_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-devel

<Prev in Thread] Current Thread [Next in Thread>