On 11/29/2010 02:40 PM, Boris Derzhavets wrote:
Could it be considered as update for "HOWTO" ?
http://bderzhavets.wordpress.com/2010/11/29/rebuild-kernel-2-6-32-26-174-xendom0-fc12-src-rpm-on-rhel-server-6/
Boris.
I ran through this tonight, and I did get it working and installed, so
thank you. :)
If I can make a couple suggestions?
1. Provide a downloadable patch file and and example showing how to use
patch for those who might be less familiar with it.
2. After compile and install, disable the epel repo as it triggers these
errors:
------------------------------------------------------------------------
[root@an-node03 x86_64]# yum update
Loaded plugins: refresh-packagekit, rhnplugin
epel | 3.7 kB 00:00
epel/primary_db | 3.4 MB 00:07
rhel-x86_64-server-6 | 1.8 kB 00:00
rhel-x86_64-server-6/primary | 1.6 MB 00:03
rhel-x86_64-server-6 3562/3562
rhel-x86_64-server-ha-6 | 1.8 kB 00:00
rhel-x86_64-server-ha-6/primary | 13 kB 00:00
rhel-x86_64-server-ha-6 35/35
rhel-x86_64-server-optional-6 | 1.6 kB 00:00
rhel-x86_64-server-optional-6/primary| 695 kB 00:01
rhel-x86_64-server-optional-6 2672/2672
Setting up Update Process
Resolving Dependencies
--> Running transaction check
--> Processing Dependency: pkgconfig(augeas) >= 0.5.0 for package:
netcf-devel-0.1.6-4.el6.x86_64
---> Package augeas-devel.x86_64 0:0.7.3-1.el5 set to be updated
--> Processing Dependency: augeas-libs = 0.7.2-3.el6 for package:
augeas-devel-0.7.2-3.el6.i686
---> Package augeas-libs.x86_64 0:0.7.3-1.el5 set to be updated
---> Package cvs.x86_64 0:1.11.23-11.el6_0.1 set to be updated
---> Package fontpackages-filesystem.noarch 0:1.44-1.el5.1 set to be updated
---> Package iwl6000-firmware.noarch 0:9.193.4.1-1.el5 set to be updated
---> Package libldb.x86_64 0:0.9.10-25.el5 set to be updated
---> Package libtalloc.x86_64 0:2.0.1-7.el5 set to be updated
---> Package libtdb.x86_64 0:1.2.1-4.el5 set to be updated
---> Package python-nose.noarch 0:0.11.3-2.el5 set to be updated
--> Processing Dependency: python(abi) = 2.4 for package:
python-nose-0.11.3-2.el5.noarch
---> Package python-paramiko.noarch 0:1.7.6-1.el5 set to be updated
--> Processing Dependency: python(abi) = 2.4 for package:
python-paramiko-1.7.6-1.el5.noarch
---> Package xorg-x11-drv-qxl.x86_64 0:0.0.12-2.1.el6_0.1 set to be updated
--> Running transaction check
---> Package augeas-devel.i686 0:0.7.2-3.el6 set to be updated
---> Package augeas-libs.i686 0:0.7.2-3.el6 set to be updated
--> Processing Dependency: libselinux.so.1 for package:
augeas-libs-0.7.2-3.el6.i686
---> Package python-nose.noarch 0:0.11.3-2.el5 set to be updated
--> Processing Dependency: python(abi) = 2.4 for package:
python-nose-0.11.3-2.el5.noarch
---> Package python-paramiko.noarch 0:1.7.6-1.el5 set to be updated
--> Processing Dependency: python(abi) = 2.4 for package:
python-paramiko-1.7.6-1.el5.noarch
--> Running transaction check
---> Package libselinux.i686 0:2.0.94-2.el6 set to be updated
---> Package python-nose.noarch 0:0.11.3-2.el5 set to be updated
--> Processing Dependency: python(abi) = 2.4 for package:
python-nose-0.11.3-2.el5.noarch
---> Package python-paramiko.noarch 0:1.7.6-1.el5 set to be updated
--> Processing Dependency: python(abi) = 2.4 for package:
python-paramiko-1.7.6-1.el5.noarch
--> Finished Dependency Resolution
Error: Package: python-nose-0.11.3-2.el5.noarch (epel)
Requires: python(abi) = 2.4
Installed: python-2.6.5-3.el6.x86_64 (@Red Hat Enterprise
Linux/6.0)
python(abi) = 2.6
Available: python26-2.6.5-5.el5.x86_64 (epel)
python(abi) = 2.6
Error: Package: python-paramiko-1.7.6-1.el5.noarch (epel)
Requires: python(abi) = 2.4
Installed: python-2.6.5-3.el6.x86_64 (@Red Hat Enterprise
Linux/6.0)
python(abi) = 2.6
Available: python26-2.6.5-5.el5.x86_64 (epel)
python(abi) = 2.6
You could try using --skip-broken to work around the problem
You could try running: rpm -Va --nofiles --nodigest
------------------------------------------------------------------------
I had to change /etc/yum.repos.d/epel.repo to 'enabled=0' and then run
'yum clean all && yum update' to get yum running again.
These are small issues though, and I'd vote for a reference in Pasi's
tutorial as an option against compiling from source (though I'd leave
that option in place).
I would like to use this to add myoung's kernel as an option in pxdi, if
that is ok with you.
--
Digimer
E-Mail: digimer@xxxxxxxxxxx
AN!Whitepapers: http://alteeve.com
Node Assassin: http://nodeassassin.org
_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users
| 
Home