WARNING - OLD ARCHIVES

This is an archived copy of the Xen.org mailing list, which we have preserved to ensure that existing links to archives are not broken. The live archive, which contains the latest emails, can be found at http://lists.xen.org/
   
 
 
Xen 
 
Home Products Support Community News
 
   
 

xen-devel

[Xen-devel] [PATCH 1/3] xen dom0: Add support for the platform_ops hyper

To: "H. Peter Anvin" <hpa@xxxxxxxxx>
Subject: [Xen-devel] [PATCH 1/3] xen dom0: Add support for the platform_ops hypercall
From: Jeremy Fitzhardinge <jeremy@xxxxxxxx>
Date: Thu, 11 Nov 2010 15:58:04 -0800
Cc: the arch/x86 maintainers <x86@xxxxxxxxxx>, Xen-devel <xen-devel@xxxxxxxxxxxxxxxxxxx>, Linux Kernel Mailing List <linux-kernel@xxxxxxxxxxxxxxx>, Jeremy Fitzhardinge <jeremy.fitzhardinge@xxxxxxxxxx>, Stephen Tweedie <sct@xxxxxxxxxx>
Delivery-date: Thu, 11 Nov 2010 16:05:38 -0800
Envelope-to: www-data@xxxxxxxxxxxxxxxxxxx
In-reply-to: <cover.1289519130.git.jeremy.fitzhardinge@xxxxxxxxxx>
In-reply-to: <cover.1289519130.git.jeremy.fitzhardinge@xxxxxxxxxx>
List-help: <mailto:xen-devel-request@lists.xensource.com?subject=help>
List-id: Xen developer discussion <xen-devel.lists.xensource.com>
List-post: <mailto:xen-devel@lists.xensource.com>
List-subscribe: <http://lists.xensource.com/mailman/listinfo/xen-devel>, <mailto:xen-devel-request@lists.xensource.com?subject=subscribe>
List-unsubscribe: <http://lists.xensource.com/mailman/listinfo/xen-devel>, <mailto:xen-devel-request@lists.xensource.com?subject=unsubscribe>
References: <cover.1289519130.git.jeremy.fitzhardinge@xxxxxxxxxx>
References: <cover.1289519130.git.jeremy.fitzhardinge@xxxxxxxxxx>
Sender: xen-devel-bounces@xxxxxxxxxxxxxxxxxxx
From: Stephen Tweedie <sct@xxxxxxxxxx>

Minimal changes to get platform ops (renamed dom0_ops on pv_ops) working
on pv_ops builds.  Pulls in upstream linux-2.6.18-xen.hg's platform.h

[ Impact: add Xen hypercall definitions ]

Signed-off-by: Stephen Tweedie <sct@xxxxxxxxxx>
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@xxxxxxxxxx>
---
 arch/x86/include/asm/xen/hypercall.h |    8 ++
 include/xen/interface/platform.h     |  222 ++++++++++++++++++++++++++++++++++
 include/xen/interface/xen.h          |    2 +
 3 files changed, 232 insertions(+), 0 deletions(-)
 create mode 100644 include/xen/interface/platform.h

diff --git a/arch/x86/include/asm/xen/hypercall.h 
b/arch/x86/include/asm/xen/hypercall.h
index a3c28ae..3d10d04 100644
--- a/arch/x86/include/asm/xen/hypercall.h
+++ b/arch/x86/include/asm/xen/hypercall.h
@@ -45,6 +45,7 @@
 #include <xen/interface/xen.h>
 #include <xen/interface/sched.h>
 #include <xen/interface/physdev.h>
+#include <xen/interface/platform.h>
 
 /*
  * The hypercall asms have to meet several constraints:
@@ -299,6 +300,13 @@ HYPERVISOR_set_timer_op(u64 timeout)
 }
 
 static inline int
+HYPERVISOR_dom0_op(struct xen_platform_op *platform_op)
+{
+       platform_op->interface_version = XENPF_INTERFACE_VERSION;
+       return _hypercall1(int, dom0_op, platform_op);
+}
+
+static inline int
 HYPERVISOR_set_debugreg(int reg, unsigned long value)
 {
        return _hypercall2(int, set_debugreg, reg, value);
diff --git a/include/xen/interface/platform.h b/include/xen/interface/platform.h
new file mode 100644
index 0000000..83e4714
--- /dev/null
+++ b/include/xen/interface/platform.h
@@ -0,0 +1,222 @@
+/******************************************************************************
+ * platform.h
+ *
+ * Hardware platform operations. Intended for use by domain-0 kernel.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to
+ * deal in the Software without restriction, including without limitation the
+ * rights to use, copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
+ * DEALINGS IN THE SOFTWARE.
+ *
+ * Copyright (c) 2002-2006, K Fraser
+ */
+
+#ifndef __XEN_PUBLIC_PLATFORM_H__
+#define __XEN_PUBLIC_PLATFORM_H__
+
+#include "xen.h"
+
+#define XENPF_INTERFACE_VERSION 0x03000001
+
+/*
+ * Set clock such that it would read <secs,nsecs> after 00:00:00 UTC,
+ * 1 January, 1970 if the current system time was <system_time>.
+ */
+#define XENPF_settime             17
+struct xenpf_settime {
+    /* IN variables. */
+    uint32_t secs;
+    uint32_t nsecs;
+    uint64_t system_time;
+};
+typedef struct xenpf_settime xenpf_settime_t;
+DEFINE_GUEST_HANDLE_STRUCT(xenpf_settime_t);
+
+/*
+ * Request memory range (@mfn, @mfn+@nr_mfns-1) to have type @type.
+ * On x86, @type is an architecture-defined MTRR memory type.
+ * On success, returns the MTRR that was used (@reg) and a handle that can
+ * be passed to XENPF_DEL_MEMTYPE to accurately tear down the new setting.
+ * (x86-specific).
+ */
+#define XENPF_add_memtype         31
+struct xenpf_add_memtype {
+    /* IN variables. */
+    unsigned long mfn;
+    uint64_t nr_mfns;
+    uint32_t type;
+    /* OUT variables. */
+    uint32_t handle;
+    uint32_t reg;
+};
+typedef struct xenpf_add_memtype xenpf_add_memtype_t;
+DEFINE_GUEST_HANDLE_STRUCT(xenpf_add_memtype_t);
+
+/*
+ * Tear down an existing memory-range type. If @handle is remembered then it
+ * should be passed in to accurately tear down the correct setting (in case
+ * of overlapping memory regions with differing types). If it is not known
+ * then @handle should be set to zero. In all cases @reg must be set.
+ * (x86-specific).
+ */
+#define XENPF_del_memtype         32
+struct xenpf_del_memtype {
+    /* IN variables. */
+    uint32_t handle;
+    uint32_t reg;
+};
+typedef struct xenpf_del_memtype xenpf_del_memtype_t;
+DEFINE_GUEST_HANDLE_STRUCT(xenpf_del_memtype_t);
+
+/* Read current type of an MTRR (x86-specific). */
+#define XENPF_read_memtype        33
+struct xenpf_read_memtype {
+    /* IN variables. */
+    uint32_t reg;
+    /* OUT variables. */
+    unsigned long mfn;
+    uint64_t nr_mfns;
+    uint32_t type;
+};
+typedef struct xenpf_read_memtype xenpf_read_memtype_t;
+DEFINE_GUEST_HANDLE_STRUCT(xenpf_read_memtype_t);
+
+#define XENPF_microcode_update    35
+struct xenpf_microcode_update {
+    /* IN variables. */
+    GUEST_HANDLE(void) data;          /* Pointer to microcode data */
+    uint32_t length;                  /* Length of microcode data. */
+};
+typedef struct xenpf_microcode_update xenpf_microcode_update_t;
+DEFINE_GUEST_HANDLE_STRUCT(xenpf_microcode_update_t);
+
+#define XENPF_platform_quirk      39
+#define QUIRK_NOIRQBALANCING      1 /* Do not restrict IO-APIC RTE targets */
+#define QUIRK_IOAPIC_BAD_REGSEL   2 /* IO-APIC REGSEL forgets its value    */
+#define QUIRK_IOAPIC_GOOD_REGSEL  3 /* IO-APIC REGSEL behaves properly     */
+struct xenpf_platform_quirk {
+    /* IN variables. */
+    uint32_t quirk_id;
+};
+typedef struct xenpf_platform_quirk xenpf_platform_quirk_t;
+DEFINE_GUEST_HANDLE_STRUCT(xenpf_platform_quirk_t);
+
+#define XENPF_firmware_info       50
+#define XEN_FW_DISK_INFO          1 /* from int 13 AH=08/41/48 */
+#define XEN_FW_DISK_MBR_SIGNATURE 2 /* from MBR offset 0x1b8 */
+#define XEN_FW_VBEDDC_INFO        3 /* from int 10 AX=4f15 */
+struct xenpf_firmware_info {
+       /* IN variables. */
+       uint32_t type;
+       uint32_t index;
+       /* OUT variables. */
+       union {
+               struct {
+                       /* Int13, Fn48: Check Extensions Present. */
+                       uint8_t device;                   /* %dl: bios device 
number */
+                       uint8_t version;                  /* %ah: major version 
     */
+                       uint16_t interface_support;       /* %cx: support 
bitmap     */
+                       /* Int13, Fn08: Legacy Get Device Parameters. */
+                       uint16_t legacy_max_cylinder;     /* %cl[7:6]:%ch: max 
cyl # */
+                       uint8_t legacy_max_head;          /* %dh: max head #    
     */
+                       uint8_t legacy_sectors_per_track; /* %cl[5:0]: max 
sector #  */
+                       /* Int13, Fn41: Get Device Parameters (as filled into 
%ds:%esi). */
+                       /* NB. First uint16_t of buffer must be set to buffer 
size.      */
+                       GUEST_HANDLE(void) edd_params;
+               } disk_info; /* XEN_FW_DISK_INFO */
+               struct {
+                       uint8_t device;                   /* bios device number 
 */
+                       uint32_t mbr_signature;           /* offset 0x1b8 in 
mbr */
+               } disk_mbr_signature; /* XEN_FW_DISK_MBR_SIGNATURE */
+               struct {
+                       /* Int10, AX=4F15: Get EDID info. */
+                       uint8_t capabilities;
+                       uint8_t edid_transfer_time;
+                       /* must refer to 128-byte buffer */
+                       GUEST_HANDLE(uchar) edid;
+               } vbeddc_info; /* XEN_FW_VBEDDC_INFO */
+       } u;
+};
+typedef struct xenpf_firmware_info xenpf_firmware_info_t;
+DEFINE_GUEST_HANDLE_STRUCT(xenpf_firmware_info_t);
+
+#define XENPF_enter_acpi_sleep    51
+struct xenpf_enter_acpi_sleep {
+       /* IN variables */
+       uint16_t pm1a_cnt_val;      /* PM1a control value. */
+       uint16_t pm1b_cnt_val;      /* PM1b control value. */
+       uint32_t sleep_state;       /* Which state to enter (Sn). */
+       uint32_t flags;             /* Must be zero. */
+};
+typedef struct xenpf_enter_acpi_sleep xenpf_enter_acpi_sleep_t;
+DEFINE_GUEST_HANDLE_STRUCT(xenpf_enter_acpi_sleep_t);
+
+#define XENPF_change_freq         52
+struct xenpf_change_freq {
+       /* IN variables */
+       uint32_t flags; /* Must be zero. */
+       uint32_t cpu;   /* Physical cpu. */
+       uint64_t freq;  /* New frequency (Hz). */
+};
+typedef struct xenpf_change_freq xenpf_change_freq_t;
+DEFINE_GUEST_HANDLE_STRUCT(xenpf_change_freq_t);
+
+/*
+ * Get idle times (nanoseconds since boot) for physical CPUs specified in the
+ * @cpumap_bitmap with range [0..@cpumap_nr_cpus-1]. The @idletime array is
+ * indexed by CPU number; only entries with the corresponding @cpumap_bitmap
+ * bit set are written to. On return, @cpumap_bitmap is modified so that any
+ * non-existent CPUs are cleared. Such CPUs have their @idletime array entry
+ * cleared.
+ */
+#define XENPF_getidletime         53
+struct xenpf_getidletime {
+       /* IN/OUT variables */
+       /* IN: CPUs to interrogate; OUT: subset of IN which are present */
+       GUEST_HANDLE(uchar) cpumap_bitmap;
+       /* IN variables */
+       /* Size of cpumap bitmap. */
+       uint32_t cpumap_nr_cpus;
+       /* Must be indexable for every cpu in cpumap_bitmap. */
+       GUEST_HANDLE(uint64_t) idletime;
+       /* OUT variables */
+       /* System time when the idletime snapshots were taken. */
+       uint64_t now;
+};
+typedef struct xenpf_getidletime xenpf_getidletime_t;
+DEFINE_GUEST_HANDLE_STRUCT(xenpf_getidletime_t);
+
+struct xen_platform_op {
+       uint32_t cmd;
+       uint32_t interface_version; /* XENPF_INTERFACE_VERSION */
+       union {
+               struct xenpf_settime           settime;
+               struct xenpf_add_memtype       add_memtype;
+               struct xenpf_del_memtype       del_memtype;
+               struct xenpf_read_memtype      read_memtype;
+               struct xenpf_microcode_update  microcode;
+               struct xenpf_platform_quirk    platform_quirk;
+               struct xenpf_firmware_info     firmware_info;
+               struct xenpf_enter_acpi_sleep  enter_acpi_sleep;
+               struct xenpf_change_freq       change_freq;
+               struct xenpf_getidletime       getidletime;
+               uint8_t                        pad[128];
+       } u;
+};
+typedef struct xen_platform_op xen_platform_op_t;
+DEFINE_GUEST_HANDLE_STRUCT(xen_platform_op_t);
+
+#endif /* __XEN_PUBLIC_PLATFORM_H__ */
diff --git a/include/xen/interface/xen.h b/include/xen/interface/xen.h
index 2befa3e..18b5599 100644
--- a/include/xen/interface/xen.h
+++ b/include/xen/interface/xen.h
@@ -461,6 +461,8 @@ typedef uint8_t xen_domain_handle_t[16];
 #define __mk_unsigned_long(x) x ## UL
 #define mk_unsigned_long(x) __mk_unsigned_long(x)
 
+DEFINE_GUEST_HANDLE(uint64_t);
+
 #else /* __ASSEMBLY__ */
 
 /* In assembly code we cannot use C numeric constant suffixes. */
-- 
1.7.2.3


_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-devel