Re: [Xen-devel] NETDEV WATCHDOG: eth2 (tg3): transmit queue 0 timed out

[Qiangmin Lin <linqiangmin@xxxxxxxxxx>]

I tried it , but there is no effect

 

QiangMin Lin

----- Original Message -----

From: wei song

To: Qiangmin Lin

Cc: xen-devel@xxxxxxxxxxxxxxxxxxx

Sent: Thursday, November 04, 2010 1:58 PM

Subject: Re: [Xen-devel] NETDEV WATCHDOG: eth2 (tg3): transmit queue 0 timed out

try with disable_msi = 1 and increase the timeout val in tg3 driver.

-James (Songwei)

2010/11/4 Qiangmin Lin <linqiangmin@xxxxxxxxxx>

The nic driver version for Broadcom is tg3 3.106 and 3.110

 

we set no parameters when insmod nic driver.

 

tks

QiangMin Lin

----- Original Message -----

From: wei song

To: Qiangmin Lin

Cc: xen-devel@xxxxxxxxxxxxxxxxxxx

Sent: Thursday, November 04, 2010 11:37 AM

Subject: Re: [Xen-devel] NETDEV WATCHDOG: eth2 (tg3): transmit queue 0 timed out

It's seems that a timeout take place at tx action. What's the nic driver version you used for Broadcom?  In addition, what's the parameters added when insmod nic driver.

-James (Song Wei)

2010/11/4 Qiangmin Lin <linqiangmin@xxxxxxxxxx>

Step 1.

 

CPU:Intel(R) Xeon(R) CPU E5620  @ 2.40GHz * 2
Nic:Broadcom 5715S * 6

 

Kernel:2.6.32.12-0.7-xen
Xen:3.4.2

 

Step 2.

 

A timeout error appears and dumps the following stack, after about a week.

 

we change Nic Intel 82576 and 82571, the timeout error as follow too.

 

[ 8385.279738] ------------[ cut here ]------------

 

[ 8385.279749] WARNING: at /usr/src/linux-2.6.32.12-0.7/net/sched/sch_generic.c:261 dev_watchdog+0x2a5/0x2c0()

 

[ 8385.279751] Hardware name:         

 

[ 8385.279753] NETDEV WATCHDOG: eth2 (tg3): transmit queue 0 timed out

 

[ 8385.279755] Modules linked in: tun(N) iptable_mangle(N) xt_physdev(N) xt_pkttype(N) ipt_MASQUERADE(N) iptable_nat(N) nf_nat(N) xt_tcpudp(N) bridge(N) gntdev(N) netbk(N) blkbk(N) blkback_pagemap(N) blktap(N) domctl(N) xenbus_be(N) ipmi_devintf(N) ipmi_si(N) ipmi_msghandler(N) cryptomgr(N) aead(N) pcompress(N) crypto_blkcipher(N) crc32c(N) crypto_hash(N) crypto_algapi(N) iscsi_tcp(N) libiscsi_tcp(N) libiscsi(N) scsi_transport_iscsi(N) 8021q(N) garp(N) stp(N) llc(N) bonding(N) microcode(N) kbox_netdev(N) dl_kbox(N) binfmt_misc(N) ip6t_REJECT(N) nf_conntrack_ipv6(N) ip6table_raw(N) xt_NOTRACK(N) ipt_REJECT(N) xt_state(N) iptable_raw(N) iptable_filter(N) ip6table_mangle(N) nf_conntrack_netbios_ns(N) nf_conntrack_ipv4(N) nf_conntrack(N) nf_defrag_ipv4(N) ip_tables(N) ip6table_filter(N) ip6_tables(N) x_tables(N) ipv6(N) usbhid(N) hid(N) loop(N) dm_mod(N) tpm_tis(N) 8250_pnp(N) tg3(N) tpm(N) iTCO_wdt(N) tpm_bios(N) pcspkr(N) shpchp(N) pci_hotplug(N) iTCO_vendor_support(N) serio_raw(N) mptctl(N) i2c_i801(N) 8250(N) i2c_core(N) serial_core(N) button(N) uhci_hcd(N) ehci_hcd(N) usbcore(N) xenblk(N) cdrom(N) xennet(N) upVhba edd(N) fan(N) thermal(N) processor(N) thermal_sys(N) hwmon(N) ata_piix(N) libata(N) mptsas(N) mptscsih(N) mptbase(N) scsi_transport_sas(N) upUpper sg(N) sd_mod(N) crc_t10dif(N) scsi_mod(N)

 

[ 8385.279817] Supported: Yes

 

[ 8385.279820] Pid: 0, comm: swapper Tainted: G          N  2.6.32.12-0.7-xen #1

 

[ 8385.279822] Call Trace:

 

[ 8385.279840]  [<ffffffff80009a75>] dump_trace+0x65/0x180

 

[ 8385.279849]  [<ffffffff8036d496>] dump_stack+0x69/0x73

 

[ 8385.279858]  [<ffffffff8003d2e4>] warn_slowpath_common+0x74/0xd0

 

[ 8385.279863]  [<ffffffff8003d390>] warn_slowpath_fmt+0x40/0x50

 

[ 8385.279867]  [<ffffffff802e5bb5>] dev_watchdog+0x2a5/0x2c0

 

[ 8385.279875]  [<ffffffff800494e2>] run_timer_softirq+0x1b2/0x2e0

 

[ 8385.279881]  [<ffffffff80043a3e>] __do_softirq+0xde/0x1a0

 

[ 8385.279886]  [<ffffffff80007f3c>] call_softirq+0x1c/0x30

 

[ 8385.279892]  [<ffffffff80009535>] do_softirq+0xa5/0xe0

 

[ 8385.279899]  [<ffffffff802746e2>] evtchn_do_upcall+0x212/0x2a0

 

[ 8385.279905]  [<ffffffff8000799e>] do_hypervisor_callback+0x1e/0x30

 

[ 8385.279913]  [<ffffffff800033aa>] 0xffffffff800033aa

 

[ 8385.279923]  [<ffffffff8000a826>] xen_safe_halt+0xb6/0x130

 

[ 8385.279928]  [<ffffffff8000de1d>] xen_idle+0x5d/0x70

 

[ 8385.279933]  [<ffffffff800065cf>] cpu_idle+0x5f/0xa0

 

[ 8385.279941]  [<ffffffff8063bbd5>] start_kernel+0x374/0x443

 

[ 8385.279945] ---[ end trace 38582b64ba009d90 ]---

 

[ 8385.279949] pci 0000:04:00.0: eth2: transmit timed out, resetting

 

[ 8385.279953] pci 0000:04:00.0: eth2: DEBUG: MAC_TX_STATUS[00000008] MAC_RX_STATUS[00000000]

 

[ 8385.279957] pci 0000:04:00.0: eth2: DEBUG: RDMAC_STATUS[00000000] WDMAC_STATUS[00000000]

 

[ 8385.279962] pci 0000:04:00.0: eth3: transmit timed out, resetting

 

[ 8385.279966] pci 0000:04:00.0: eth3: DEBUG: MAC_TX_STATUS[00000008] MAC_RX_STATUS[00000000]

 

[ 8385.279970] pci 0000:04:00.0: eth3: DEBUG: RDMAC_STATUS[00000000] WDMAC_STATUS[00000000]

 

[ 8385.296378] pci 0000:04:00.0: eth2: Link is down

 

[ 8385.334989] pci 0000:04:00.0: eth3: Link is down

 

Please let me know if you need further information.
So perhaps you can help.

 

Many thanks in advance,
best regards,

qiangmin lin

_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-devel

_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-devel