Initializing cgroup subsys cpuset Initializing cgroup subsys cpu Linux version 2.6.32.21 (michael@xxxxxxxxxxxx) (gcc version 4.4.4 20100630 (Red Hat 4.4.4-10) (GCC) ) #1 SMP Wed Sep 8 22:14:28 BST 2010 Command line: ro root=UUID=fcb47974-dd00-4990-bcee-e2b50a0f184b 3 apic=debug KERNEL supported cpus: Intel GenuineIntel AMD AuthenticAMD Centaur CentaurHauls BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f000 (usable) BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved) BIOS-e820: 0000000000100000 - 00000000df66d800 (usable) BIOS-e820: 00000000df66d800 - 00000000e0000000 (reserved) BIOS-e820: 00000000f8000000 - 00000000fc000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) BIOS-e820: 00000000fed18000 - 00000000fed1c000 (reserved) BIOS-e820: 00000000fed20000 - 00000000fed90000 (reserved) BIOS-e820: 00000000feda0000 - 00000000feda6000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved) BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved) BIOS-e820: 0000000100000000 - 0000000120000000 (usable) DMI 2.4 present. last_pfn = 0x120000 max_arch_pfn = 0x400000000 MTRR default type: uncachable MTRR fixed ranges enabled: 00000-9FFFF write-back A0000-BFFFF uncachable C0000-CFFFF write-protect D0000-EFFFF uncachable F0000-FFFFF write-protect MTRR variable ranges enabled: 0 base 000000000 mask F80000000 write-back 1 base 080000000 mask FC0000000 write-back 2 base 0C0000000 mask FE0000000 write-back 3 base 100000000 mask F00000000 write-back 4 base 0DF800000 mask FFF800000 uncachable 5 base 0DF700000 mask FFFF00000 uncachable 6 disabled 7 disabled x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 original variable MTRRs reg 0, base: 0GB, range: 2GB, type WB reg 1, base: 2GB, range: 1GB, type WB reg 2, base: 3GB, range: 512MB, type WB reg 3, base: 4GB, range: 4GB, type WB reg 4, base: 3576MB, range: 8MB, type UC reg 5, base: 3575MB, range: 1MB, type UC total RAM covered: 7671M Found optimal setting for mtrr clean up gran_size: 64K chunk_size: 1G num_reg: 5 lose cover RAM: 0G New variable MTRRs reg 0, base: 0GB, range: 4GB, type WB reg 1, base: 3575MB, range: 1MB, type UC reg 2, base: 3576MB, range: 8MB, type UC reg 3, base: 3584MB, range: 512MB, type UC reg 4, base: 4GB, range: 4GB, type WB e820 update range: 00000000df700000 - 0000000100000000 (usable) ==> (reserved) last_pfn = 0xdf66d max_arch_pfn = 0x400000000 initial memory mapped : 0 - 20000000 init_memory_mapping: 0000000000000000-00000000df66d000 0000000000 - 00df600000 page 2M 00df600000 - 00df66d000 page 4k kernel direct mapping tables up to df66d000 @ 8000-e000 init_memory_mapping: 0000000100000000-0000000120000000 0100000000 - 0120000000 page 2M kernel direct mapping tables up to 120000000 @ c000-12000 RAMDISK: 3742f000 - 37fef72b ACPI: RSDP 00000000000fbc60 00024 (v02 DELL ) ACPI: XSDT 00000000df66f200 00064 (v01 DELL M08 27D90A1B ASL 00000061) ACPI: FACP 00000000df66f09c 000F4 (v04 DELL M08 27D90A1B ASL 00000061) ACPI: DSDT 00000000df66f800 05477 (v02 INT430 SYSFexxx 00001001 INTL 20050624) ACPI: FACS 00000000df67e000 00040 ACPI: HPET 00000000df66f300 00038 (v01 DELL M08 00000001 ASL 00000061) ACPI: APIC 00000000df66f400 00068 (v01 DELL M08 27D90A1B ASL 00000047) ACPI: MCFG 00000000df66f3c0 0003E (v16 DELL M08 27D90A1B ASL 00000061) ACPI: SLIC 00000000df66f49c 00176 (v01 DELL M08 27D90A1B ASL 00000061) ACPI: OSFR 00000000df66ea00 0002C (v01 DELL M08 27D90A1B ASL 00000061) ACPI: BOOT 00000000df66efc0 00028 (v01 DELL M08 27D90A1B ASL 00000061) ACPI: SSDT 00000000df66d97e 004CC (v01 PmRef CpuPm 00003000 INTL 20050624) ACPI: Local APIC address 0xfee00000 No NUMA configuration found Faking a node at 0000000000000000-0000000120000000 Bootmem setup node 0 0000000000000000-0000000120000000 NODE_DATA [000000000000d000 - 0000000000022fff] bootmap [0000000000023000 - 0000000000046fff] pages 24 (8 early reservations) ==> bootmem [0000000000 - 0120000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] #2 [0001000000 - 0001a0cfa8] TEXT DATA BSS ==> [0001000000 - 0001a0cfa8] #3 [003742f000 - 0037fef72b] RAMDISK ==> [003742f000 - 0037fef72b] #4 [000009f000 - 0000100000] BIOS reserved ==> [000009f000 - 0000100000] #5 [0001a0d000 - 0001a0d1e8] BRK ==> [0001a0d000 - 0001a0d1e8] #6 [0000008000 - 000000c000] PGTABLE ==> [0000008000 - 000000c000] #7 [000000c000 - 000000d000] PGTABLE ==> [000000c000 - 000000d000] Scan SMP from ffff880000000000 for 1024 bytes. Scan SMP from ffff88000009fc00 for 1024 bytes. Scan SMP from ffff8800000f0000 for 65536 bytes. Scan SMP from ffff88000009f000 for 1024 bytes. [ffffea0000000000-ffffea0003ffffff] PMD -> [ffff880001c00000-ffff8800055fffff] on node 0 Zone PFN ranges: DMA 0x00000000 -> 0x00001000 DMA32 0x00001000 -> 0x00100000 Normal 0x00100000 -> 0x00120000 Movable zone start PFN for each node early_node_map[3] active PFN ranges 0: 0x00000000 -> 0x0000009f 0: 0x00000100 -> 0x000df66d 0: 0x00100000 -> 0x00120000 On node 0 totalpages: 1046028 DMA zone: 56 pages used for memmap DMA zone: 105 pages reserved DMA zone: 3838 pages, LIFO batch:0 DMA32 zone: 14280 pages used for memmap DMA32 zone: 896677 pages, LIFO batch:31 Normal zone: 1792 pages used for memmap Normal zone: 129280 pages, LIFO batch:31 ACPI: PM-Timer IO Port: 0x1008 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Using ACPI (MADT) for SMP configuration information ACPI: HPET id: 0x8086a201 base: 0xfed00000 SMP: Allowing 2 CPUs, 0 hotplug CPUs mapped APIC to ffffffffff5fb000 (fee00000) mapped IOAPIC to ffffffffff5fa000 (fec00000) nr_irqs_gsi: 24 PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 PM: Registered nosave memory: 00000000000a0000 - 0000000000100000 PM: Registered nosave memory: 00000000df66d000 - 00000000df66e000 PM: Registered nosave memory: 00000000df66e000 - 00000000e0000000 PM: Registered nosave memory: 00000000e0000000 - 00000000f8000000 PM: Registered nosave memory: 00000000f8000000 - 00000000fc000000 PM: Registered nosave memory: 00000000fc000000 - 00000000fec00000 PM: Registered nosave memory: 00000000fec00000 - 00000000fec10000 PM: Registered nosave memory: 00000000fec10000 - 00000000fed18000 PM: Registered nosave memory: 00000000fed18000 - 00000000fed1c000 PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000 PM: Registered nosave memory: 00000000fed20000 - 00000000fed90000 PM: Registered nosave memory: 00000000fed90000 - 00000000feda0000 PM: Registered nosave memory: 00000000feda0000 - 00000000feda6000 PM: Registered nosave memory: 00000000feda6000 - 00000000fee00000 PM: Registered nosave memory: 00000000fee00000 - 00000000fee10000 PM: Registered nosave memory: 00000000fee10000 - 00000000ffe00000 PM: Registered nosave memory: 00000000ffe00000 - 0000000100000000 Allocating PCI resources starting at e0000000 (gap: e0000000:18000000) Booting paravirtualized kernel on bare hardware NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:2 nr_node_ids:1 PERCPU: Embedded 30 pages/cpu @ffff880005800000 s90392 r8192 d24296 u1048576 pcpu-alloc: s90392 r8192 d24296 u1048576 alloc=1*2097152 pcpu-alloc: [0] 0 1 Built 1 zonelists in Node order, mobility grouping on. Total pages: 1029795 Policy zone: Normal Kernel command line: ro root=UUID=fcb47974-dd00-4990-bcee-e2b50a0f184b 3 apic=debug PID hash table entries: 4096 (order: 3, 32768 bytes) Initializing CPU#0 Checking aperture... No AGP bridge found Calgary: detecting Calgary via BIOS EBDA area Calgary: Unable to locate Rio Grande table in EBDA - bailing! Memory: 4035700k/4718592k available (4491k kernel code, 534480k absent, 148412k reserved, 3580k data, 944k init) SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 Hierarchical RCU implementation. NR_IRQS:4352 nr_irqs:424 Extended CMOS year: 2000 Console: colour VGA+ 80x25 console [tty0] enabled allocated 41943040 bytes of page_cgroup please try 'cgroup_disable=memory' option if you don't want memory cgroups hpet clockevent registered HPET: 3 timers in total, 0 timers will be used for per-cpu timer Fast TSC calibration using PIT Detected 2393.884 MHz processor. Calibrating delay loop (skipped), value calculated using timer frequency.. 4787.76 BogoMIPS (lpj=2393884) Security Framework initialized SELinux: Initializing. SELinux: Starting in permissive mode Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) Mount-cache hash table entries: 256 Initializing cgroup subsys ns Initializing cgroup subsys cpuacct Initializing cgroup subsys memory Initializing cgroup subsys devices Initializing cgroup subsys freezer Initializing cgroup subsys net_cls CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 3072K CPU 0/0x0 -> Node 0 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 mce: CPU supports 6 MCE banks CPU0: Thermal monitoring enabled (TM2) using mwait in idle threads. Performance Events: Core2 events, Intel PMU driver. ... version: 2 ... bit width: 40 ... generic registers: 2 ... value mask: 000000ffffffffff ... max period: 000000007fffffff ... fixed-purpose events: 3 ... event mask: 0000000700000003 ACPI: Core revision 20090903 ftrace: converting mcount calls to 0f 1f 44 00 00 ftrace: allocating 23220 entries in 92 pages Setting APIC routing to flat Getting VERSION: 50014 Getting VERSION: 50014 Getting ID: 0 Getting ID: 0 enabled ExtINT on CPU#0 ESR value before enabling vector: 0x00000040 after: 0x00000000 ENABLING IO-APIC IRQs init IO_APIC IRQs 2-0 (apicid-pin) not connected setup_IO_APIC_irq: cfg->domain=-1 (vector: 49) PRE [vec:48,cpu:0] = irq:0 PRE [vec:49,cpu:0] = irq:1 PRE [vec:50,cpu:0] = irq:2 PRE [vec:51,cpu:0] = irq:3 PRE [vec:52,cpu:0] = irq:4 PRE [vec:53,cpu:0] = irq:5 PRE [vec:54,cpu:0] = irq:6 PRE [vec:55,cpu:0] = irq:7 PRE [vec:56,cpu:0] = irq:8 PRE [vec:57,cpu:0] = irq:9 PRE [vec:58,cpu:0] = irq:10 PRE [vec:59,cpu:0] = irq:11 PRE [vec:60,cpu:0] = irq:12 PRE [vec:61,cpu:0] = irq:13 PRE [vec:62,cpu:0] = irq:14 old_vector: 49 mask: 1 PAST [vec:48,cpu:0] = irq:0 PAST [vec:49,cpu:0] = irq:1 PAST [vec:50,cpu:0] = irq:2 PAST [vec:51,cpu:0] = irq:3 PAST [vec:52,cpu:0] = irq:4 PAST [vec:53,cpu:0] = irq:5 PAST [vec:54,cpu:0] = irq:6 PAST [vec:55,cpu:0] = irq:7 PAST [vec:56,cpu:0] = irq:8 PAST [vec:57,cpu:0] = irq:9 PAST [vec:58,cpu:0] = irq:10 PAST [vec:59,cpu:0] = irq:11 PAST [vec:60,cpu:0] = irq:12 PAST [vec:61,cpu:0] = irq:13 PAST [vec:62,cpu:0] = irq:14 setup_IO_APIC_irq: dest=1 IOAPIC[0]: Set routing entry (2-1 -> 0x31 -> IRQ 1 Mode:0 Active:0) Reprogramming PIN1, dest=1 setup_IO_APIC_irq: cfg->domain=-1 (vector: 48) PRE [vec:48,cpu:0] = irq:0 PRE [vec:49,cpu:0] = irq:1 PRE [vec:50,cpu:0] = irq:2 PRE [vec:51,cpu:0] = irq:3 PRE [vec:52,cpu:0] = irq:4 PRE [vec:53,cpu:0] = irq:5 PRE [vec:54,cpu:0] = irq:6 PRE [vec:55,cpu:0] = irq:7 PRE [vec:56,cpu:0] = irq:8 PRE [vec:57,cpu:0] = irq:9 PRE [vec:58,cpu:0] = irq:10 PRE [vec:59,cpu:0] = irq:11 PRE [vec:60,cpu:0] = irq:12 PRE [vec:61,cpu:0] = irq:13 PRE [vec:62,cpu:0] = irq:14 old_vector: 48 mask: 1 PAST [vec:48,cpu:0] = irq:0 PAST [vec:49,cpu:0] = irq:1 PAST [vec:50,cpu:0] = irq:2 PAST [vec:51,cpu:0] = irq:3 PAST [vec:52,cpu:0] = irq:4 PAST [vec:53,cpu:0] = irq:5 PAST [vec:54,cpu:0] = irq:6 PAST [vec:55,cpu:0] = irq:7 PAST [vec:56,cpu:0] = irq:8 PAST [vec:57,cpu:0] = irq:9 PAST [vec:58,cpu:0] = irq:10 PAST [vec:59,cpu:0] = irq:11 PAST [vec:60,cpu:0] = irq:12 PAST [vec:61,cpu:0] = irq:13 PAST [vec:62,cpu:0] = irq:14 setup_IO_APIC_irq: dest=1 IOAPIC[0]: Set routing entry (2-2 -> 0x30 -> IRQ 0 Mode:0 Active:0) setup_IO_APIC_irq: cfg->domain=-1 (vector: 51) PRE [vec:48,cpu:0] = irq:0 PRE [vec:49,cpu:0] = irq:1 PRE [vec:50,cpu:0] = irq:2 PRE [vec:51,cpu:0] = irq:3 PRE [vec:52,cpu:0] = irq:4 PRE [vec:53,cpu:0] = irq:5 PRE [vec:54,cpu:0] = irq:6 PRE [vec:55,cpu:0] = irq:7 PRE [vec:56,cpu:0] = irq:8 PRE [vec:57,cpu:0] = irq:9 PRE [vec:58,cpu:0] = irq:10 PRE [vec:59,cpu:0] = irq:11 PRE [vec:60,cpu:0] = irq:12 PRE [vec:61,cpu:0] = irq:13 PRE [vec:62,cpu:0] = irq:14 old_vector: 51 mask: 1 PAST [vec:48,cpu:0] = irq:0 PAST [vec:49,cpu:0] = irq:1 PAST [vec:50,cpu:0] = irq:2 PAST [vec:51,cpu:0] = irq:3 PAST [vec:52,cpu:0] = irq:4 PAST [vec:53,cpu:0] = irq:5 PAST [vec:54,cpu:0] = irq:6 PAST [vec:55,cpu:0] = irq:7 PAST [vec:56,cpu:0] = irq:8 PAST [vec:57,cpu:0] = irq:9 PAST [vec:58,cpu:0] = irq:10 PAST [vec:59,cpu:0] = irq:11 PAST [vec:60,cpu:0] = irq:12 PAST [vec:61,cpu:0] = irq:13 PAST [vec:62,cpu:0] = irq:14 setup_IO_APIC_irq: dest=1 IOAPIC[0]: Set routing entry (2-3 -> 0x33 -> IRQ 3 Mode:0 Active:0) setup_IO_APIC_irq: cfg->domain=-1 (vector: 52) PRE [vec:48,cpu:0] = irq:0 PRE [vec:49,cpu:0] = irq:1 PRE [vec:50,cpu:0] = irq:2 PRE [vec:51,cpu:0] = irq:3 PRE [vec:52,cpu:0] = irq:4 PRE [vec:53,cpu:0] = irq:5 PRE [vec:54,cpu:0] = irq:6 PRE [vec:55,cpu:0] = irq:7 PRE [vec:56,cpu:0] = irq:8 PRE [vec:57,cpu:0] = irq:9 PRE [vec:58,cpu:0] = irq:10 PRE [vec:59,cpu:0] = irq:11 PRE [vec:60,cpu:0] = irq:12 PRE [vec:61,cpu:0] = irq:13 PRE [vec:62,cpu:0] = irq:14 old_vector: 52 mask: 1 PAST [vec:48,cpu:0] = irq:0 PAST [vec:49,cpu:0] = irq:1 PAST [vec:50,cpu:0] = irq:2 PAST [vec:51,cpu:0] = irq:3 PAST [vec:52,cpu:0] = irq:4 PAST [vec:53,cpu:0] = irq:5 PAST [vec:54,cpu:0] = irq:6 PAST [vec:55,cpu:0] = irq:7 PAST [vec:56,cpu:0] = irq:8 PAST [vec:57,cpu:0] = irq:9 PAST [vec:58,cpu:0] = irq:10 PAST [vec:59,cpu:0] = irq:11 PAST [vec:60,cpu:0] = irq:12 PAST [vec:61,cpu:0] = irq:13 PAST [vec:62,cpu:0] = irq:14 setup_IO_APIC_irq: dest=1 IOAPIC[0]: Set routing entry (2-4 -> 0x34 -> IRQ 4 Mode:0 Active:0) setup_IO_APIC_irq: cfg->domain=-1 (vector: 53) PRE [vec:48,cpu:0] = irq:0 PRE [vec:49,cpu:0] = irq:1 PRE [vec:50,cpu:0] = irq:2 PRE [vec:51,cpu:0] = irq:3 PRE [vec:52,cpu:0] = irq:4 PRE [vec:53,cpu:0] = irq:5 PRE [vec:54,cpu:0] = irq:6 PRE [vec:55,cpu:0] = irq:7 PRE [vec:56,cpu:0] = irq:8 PRE [vec:57,cpu:0] = irq:9 PRE [vec:58,cpu:0] = irq:10 PRE [vec:59,cpu:0] = irq:11 PRE [vec:60,cpu:0] = irq:12 PRE [vec:61,cpu:0] = irq:13 PRE [vec:62,cpu:0] = irq:14 old_vector: 53 mask: 1 PAST [vec:48,cpu:0] = irq:0 PAST [vec:49,cpu:0] = irq:1 PAST [vec:50,cpu:0] = irq:2 PAST [vec:51,cpu:0] = irq:3 PAST [vec:52,cpu:0] = irq:4 PAST [vec:53,cpu:0] = irq:5 PAST [vec:54,cpu:0] = irq:6 PAST [vec:55,cpu:0] = irq:7 PAST [vec:56,cpu:0] = irq:8 PAST [vec:57,cpu:0] = irq:9 PAST [vec:58,cpu:0] = irq:10 PAST [vec:59,cpu:0] = irq:11 PAST [vec:60,cpu:0] = irq:12 PAST [vec:61,cpu:0] = irq:13 PAST [vec:62,cpu:0] = irq:14 setup_IO_APIC_irq: dest=1 IOAPIC[0]: Set routing entry (2-5 -> 0x35 -> IRQ 5 Mode:0 Active:0) setup_IO_APIC_irq: cfg->domain=-1 (vector: 54) PRE [vec:48,cpu:0] = irq:0 PRE [vec:49,cpu:0] = irq:1 PRE [vec:50,cpu:0] = irq:2 PRE [vec:51,cpu:0] = irq:3 PRE [vec:52,cpu:0] = irq:4 PRE [vec:53,cpu:0] = irq:5 PRE [vec:54,cpu:0] = irq:6 PRE [vec:55,cpu:0] = irq:7 PRE [vec:56,cpu:0] = irq:8 PRE [vec:57,cpu:0] = irq:9 PRE [vec:58,cpu:0] = irq:10 PRE [vec:59,cpu:0] = irq:11 PRE [vec:60,cpu:0] = irq:12 PRE [vec:61,cpu:0] = irq:13 PRE [vec:62,cpu:0] = irq:14 old_vector: 54 mask: 1 PAST [vec:48,cpu:0] = irq:0 PAST [vec:49,cpu:0] = irq:1 PAST [vec:50,cpu:0] = irq:2 PAST [vec:51,cpu:0] = irq:3 PAST [vec:52,cpu:0] = irq:4 PAST [vec:53,cpu:0] = irq:5 PAST [vec:54,cpu:0] = irq:6 PAST [vec:55,cpu:0] = irq:7 PAST [vec:56,cpu:0] = irq:8 PAST [vec:57,cpu:0] = irq:9 PAST [vec:58,cpu:0] = irq:10 PAST [vec:59,cpu:0] = irq:11 PAST [vec:60,cpu:0] = irq:12 PAST [vec:61,cpu:0] = irq:13 PAST [vec:62,cpu:0] = irq:14 setup_IO_APIC_irq: dest=1 IOAPIC[0]: Set routing entry (2-6 -> 0x36 -> IRQ 6 Mode:0 Active:0) setup_IO_APIC_irq: cfg->domain=-1 (vector: 55) PRE [vec:48,cpu:0] = irq:0 PRE [vec:49,cpu:0] = irq:1 PRE [vec:50,cpu:0] = irq:2 PRE [vec:51,cpu:0] = irq:3 PRE [vec:52,cpu:0] = irq:4 PRE [vec:53,cpu:0] = irq:5 PRE [vec:54,cpu:0] = irq:6 PRE [vec:55,cpu:0] = irq:7 PRE [vec:56,cpu:0] = irq:8 PRE [vec:57,cpu:0] = irq:9 PRE [vec:58,cpu:0] = irq:10 PRE [vec:59,cpu:0] = irq:11 PRE [vec:60,cpu:0] = irq:12 PRE [vec:61,cpu:0] = irq:13 PRE [vec:62,cpu:0] = irq:14 old_vector: 55 mask: 1 PAST [vec:48,cpu:0] = irq:0 PAST [vec:49,cpu:0] = irq:1 PAST [vec:50,cpu:0] = irq:2 PAST [vec:51,cpu:0] = irq:3 PAST [vec:52,cpu:0] = irq:4 PAST [vec:53,cpu:0] = irq:5 PAST [vec:54,cpu:0] = irq:6 PAST [vec:55,cpu:0] = irq:7 PAST [vec:56,cpu:0] = irq:8 PAST [vec:57,cpu:0] = irq:9 PAST [vec:58,cpu:0] = irq:10 PAST [vec:59,cpu:0] = irq:11 PAST [vec:60,cpu:0] = irq:12 PAST [vec:61,cpu:0] = irq:13 PAST [vec:62,cpu:0] = irq:14 setup_IO_APIC_irq: dest=1 IOAPIC[0]: Set routing entry (2-7 -> 0x37 -> IRQ 7 Mode:0 Active:0) setup_IO_APIC_irq: cfg->domain=-1 (vector: 56) PRE [vec:48,cpu:0] = irq:0 PRE [vec:49,cpu:0] = irq:1 PRE [vec:50,cpu:0] = irq:2 PRE [vec:51,cpu:0] = irq:3 PRE [vec:52,cpu:0] = irq:4 PRE [vec:53,cpu:0] = irq:5 PRE [vec:54,cpu:0] = irq:6 PRE [vec:55,cpu:0] = irq:7 PRE [vec:56,cpu:0] = irq:8 PRE [vec:57,cpu:0] = irq:9 PRE [vec:58,cpu:0] = irq:10 PRE [vec:59,cpu:0] = irq:11 PRE [vec:60,cpu:0] = irq:12 PRE [vec:61,cpu:0] = irq:13 PRE [vec:62,cpu:0] = irq:14 old_vector: 56 mask: 1 PAST [vec:48,cpu:0] = irq:0 PAST [vec:49,cpu:0] = irq:1 PAST [vec:50,cpu:0] = irq:2 PAST [vec:51,cpu:0] = irq:3 PAST [vec:52,cpu:0] = irq:4 PAST [vec:53,cpu:0] = irq:5 PAST [vec:54,cpu:0] = irq:6 PAST [vec:55,cpu:0] = irq:7 PAST [vec:56,cpu:0] = irq:8 PAST [vec:57,cpu:0] = irq:9 PAST [vec:58,cpu:0] = irq:10 PAST [vec:59,cpu:0] = irq:11 PAST [vec:60,cpu:0] = irq:12 PAST [vec:61,cpu:0] = irq:13 PAST [vec:62,cpu:0] = irq:14 setup_IO_APIC_irq: dest=1 IOAPIC[0]: Set routing entry (2-8 -> 0x38 -> IRQ 8 Mode:0 Active:0) setup_IO_APIC_irq: cfg->domain=-1 (vector: 57) PRE [vec:48,cpu:0] = irq:0 PRE [vec:49,cpu:0] = irq:1 PRE [vec:50,cpu:0] = irq:2 PRE [vec:51,cpu:0] = irq:3 PRE [vec:52,cpu:0] = irq:4 PRE [vec:53,cpu:0] = irq:5 PRE [vec:54,cpu:0] = irq:6 PRE [vec:55,cpu:0] = irq:7 PRE [vec:56,cpu:0] = irq:8 PRE [vec:57,cpu:0] = irq:9 PRE [vec:58,cpu:0] = irq:10 PRE [vec:59,cpu:0] = irq:11 PRE [vec:60,cpu:0] = irq:12 PRE [vec:61,cpu:0] = irq:13 PRE [vec:62,cpu:0] = irq:14 old_vector: 57 mask: 1 PAST [vec:48,cpu:0] = irq:0 PAST [vec:49,cpu:0] = irq:1 PAST [vec:50,cpu:0] = irq:2 PAST [vec:51,cpu:0] = irq:3 PAST [vec:52,cpu:0] = irq:4 PAST [vec:53,cpu:0] = irq:5 PAST [vec:54,cpu:0] = irq:6 PAST [vec:55,cpu:0] = irq:7 PAST [vec:56,cpu:0] = irq:8 PAST [vec:57,cpu:0] = irq:9 PAST [vec:58,cpu:0] = irq:10 PAST [vec:59,cpu:0] = irq:11 PAST [vec:60,cpu:0] = irq:12 PAST [vec:61,cpu:0] = irq:13 PAST [vec:62,cpu:0] = irq:14 setup_IO_APIC_irq: dest=1 IOAPIC[0]: Set routing entry (2-9 -> 0x39 -> IRQ 9 Mode:1 Active:0) setup_IO_APIC_irq: cfg->domain=-1 (vector: 58) PRE [vec:48,cpu:0] = irq:0 PRE [vec:49,cpu:0] = irq:1 PRE [vec:50,cpu:0] = irq:2 PRE [vec:51,cpu:0] = irq:3 PRE [vec:52,cpu:0] = irq:4 PRE [vec:53,cpu:0] = irq:5 PRE [vec:54,cpu:0] = irq:6 PRE [vec:55,cpu:0] = irq:7 PRE [vec:56,cpu:0] = irq:8 PRE [vec:57,cpu:0] = irq:9 PRE [vec:58,cpu:0] = irq:10 PRE [vec:59,cpu:0] = irq:11 PRE [vec:60,cpu:0] = irq:12 PRE [vec:61,cpu:0] = irq:13 PRE [vec:62,cpu:0] = irq:14 old_vector: 58 mask: 1 PAST [vec:48,cpu:0] = irq:0 PAST [vec:49,cpu:0] = irq:1 PAST [vec:50,cpu:0] = irq:2 PAST [vec:51,cpu:0] = irq:3 PAST [vec:52,cpu:0] = irq:4 PAST [vec:53,cpu:0] = irq:5 PAST [vec:54,cpu:0] = irq:6 PAST [vec:55,cpu:0] = irq:7 PAST [vec:56,cpu:0] = irq:8 PAST [vec:57,cpu:0] = irq:9 PAST [vec:58,cpu:0] = irq:10 PAST [vec:59,cpu:0] = irq:11 PAST [vec:60,cpu:0] = irq:12 PAST [vec:61,cpu:0] = irq:13 PAST [vec:62,cpu:0] = irq:14 setup_IO_APIC_irq: dest=1 IOAPIC[0]: Set routing entry (2-10 -> 0x3a -> IRQ 10 Mode:0 Active:0) setup_IO_APIC_irq: cfg->domain=-1 (vector: 59) PRE [vec:48,cpu:0] = irq:0 PRE [vec:49,cpu:0] = irq:1 PRE [vec:50,cpu:0] = irq:2 PRE [vec:51,cpu:0] = irq:3 PRE [vec:52,cpu:0] = irq:4 PRE [vec:53,cpu:0] = irq:5 PRE [vec:54,cpu:0] = irq:6 PRE [vec:55,cpu:0] = irq:7 PRE [vec:56,cpu:0] = irq:8 PRE [vec:57,cpu:0] = irq:9 PRE [vec:58,cpu:0] = irq:10 PRE [vec:59,cpu:0] = irq:11 PRE [vec:60,cpu:0] = irq:12 PRE [vec:61,cpu:0] = irq:13 PRE [vec:62,cpu:0] = irq:14 old_vector: 59 mask: 1 PAST [vec:48,cpu:0] = irq:0 PAST [vec:49,cpu:0] = irq:1 PAST [vec:50,cpu:0] = irq:2 PAST [vec:51,cpu:0] = irq:3 PAST [vec:52,cpu:0] = irq:4 PAST [vec:53,cpu:0] = irq:5 PAST [vec:54,cpu:0] = irq:6 PAST [vec:55,cpu:0] = irq:7 PAST [vec:56,cpu:0] = irq:8 PAST [vec:57,cpu:0] = irq:9 PAST [vec:58,cpu:0] = irq:10 PAST [vec:59,cpu:0] = irq:11 PAST [vec:60,cpu:0] = irq:12 PAST [vec:61,cpu:0] = irq:13 PAST [vec:62,cpu:0] = irq:14 setup_IO_APIC_irq: dest=1 IOAPIC[0]: Set routing entry (2-11 -> 0x3b -> IRQ 11 Mode:0 Active:0) setup_IO_APIC_irq: cfg->domain=-1 (vector: 60) PRE [vec:48,cpu:0] = irq:0 PRE [vec:49,cpu:0] = irq:1 PRE [vec:50,cpu:0] = irq:2 PRE [vec:51,cpu:0] = irq:3 PRE [vec:52,cpu:0] = irq:4 PRE [vec:53,cpu:0] = irq:5 PRE [vec:54,cpu:0] = irq:6 PRE [vec:55,cpu:0] = irq:7 PRE [vec:56,cpu:0] = irq:8 PRE [vec:57,cpu:0] = irq:9 PRE [vec:58,cpu:0] = irq:10 PRE [vec:59,cpu:0] = irq:11 PRE [vec:60,cpu:0] = irq:12 PRE [vec:61,cpu:0] = irq:13 PRE [vec:62,cpu:0] = irq:14 old_vector: 60 mask: 1 PAST [vec:48,cpu:0] = irq:0 PAST [vec:49,cpu:0] = irq:1 PAST [vec:50,cpu:0] = irq:2 PAST [vec:51,cpu:0] = irq:3 PAST [vec:52,cpu:0] = irq:4 PAST [vec:53,cpu:0] = irq:5 PAST [vec:54,cpu:0] = irq:6 PAST [vec:55,cpu:0] = irq:7 PAST [vec:56,cpu:0] = irq:8 PAST [vec:57,cpu:0] = irq:9 PAST [vec:58,cpu:0] = irq:10 PAST [vec:59,cpu:0] = irq:11 PAST [vec:60,cpu:0] = irq:12 PAST [vec:61,cpu:0] = irq:13 PAST [vec:62,cpu:0] = irq:14 setup_IO_APIC_irq: dest=1 IOAPIC[0]: Set routing entry (2-12 -> 0x3c -> IRQ 12 Mode:0 Active:0) Reprogramming PIN12, dest=1 setup_IO_APIC_irq: cfg->domain=-1 (vector: 61) PRE [vec:48,cpu:0] = irq:0 PRE [vec:49,cpu:0] = irq:1 PRE [vec:50,cpu:0] = irq:2 PRE [vec:51,cpu:0] = irq:3 PRE [vec:52,cpu:0] = irq:4 PRE [vec:53,cpu:0] = irq:5 PRE [vec:54,cpu:0] = irq:6 PRE [vec:55,cpu:0] = irq:7 PRE [vec:56,cpu:0] = irq:8 PRE [vec:57,cpu:0] = irq:9 PRE [vec:58,cpu:0] = irq:10 PRE [vec:59,cpu:0] = irq:11 PRE [vec:60,cpu:0] = irq:12 PRE [vec:61,cpu:0] = irq:13 PRE [vec:62,cpu:0] = irq:14 old_vector: 61 mask: 1 PAST [vec:48,cpu:0] = irq:0 PAST [vec:49,cpu:0] = irq:1 PAST [vec:50,cpu:0] = irq:2 PAST [vec:51,cpu:0] = irq:3 PAST [vec:52,cpu:0] = irq:4 PAST [vec:53,cpu:0] = irq:5 PAST [vec:54,cpu:0] = irq:6 PAST [vec:55,cpu:0] = irq:7 PAST [vec:56,cpu:0] = irq:8 PAST [vec:57,cpu:0] = irq:9 PAST [vec:58,cpu:0] = irq:10 PAST [vec:59,cpu:0] = irq:11 PAST [vec:60,cpu:0] = irq:12 PAST [vec:61,cpu:0] = irq:13 PAST [vec:62,cpu:0] = irq:14 setup_IO_APIC_irq: dest=1 IOAPIC[0]: Set routing entry (2-13 -> 0x3d -> IRQ 13 Mode:0 Active:0) setup_IO_APIC_irq: cfg->domain=-1 (vector: 62) PRE [vec:48,cpu:0] = irq:0 PRE [vec:49,cpu:0] = irq:1 PRE [vec:50,cpu:0] = irq:2 PRE [vec:51,cpu:0] = irq:3 PRE [vec:52,cpu:0] = irq:4 PRE [vec:53,cpu:0] = irq:5 PRE [vec:54,cpu:0] = irq:6 PRE [vec:55,cpu:0] = irq:7 PRE [vec:56,cpu:0] = irq:8 PRE [vec:57,cpu:0] = irq:9 PRE [vec:58,cpu:0] = irq:10 PRE [vec:59,cpu:0] = irq:11 PRE [vec:60,cpu:0] = irq:12 PRE [vec:61,cpu:0] = irq:13 PRE [vec:62,cpu:0] = irq:14 old_vector: 62 mask: 1 PAST [vec:48,cpu:0] = irq:0 PAST [vec:49,cpu:0] = irq:1 PAST [vec:50,cpu:0] = irq:2 PAST [vec:51,cpu:0] = irq:3 PAST [vec:52,cpu:0] = irq:4 PAST [vec:53,cpu:0] = irq:5 PAST [vec:54,cpu:0] = irq:6 PAST [vec:55,cpu:0] = irq:7 PAST [vec:56,cpu:0] = irq:8 PAST [vec:57,cpu:0] = irq:9 PAST [vec:58,cpu:0] = irq:10 PAST [vec:59,cpu:0] = irq:11 PAST [vec:60,cpu:0] = irq:12 PAST [vec:61,cpu:0] = irq:13 PAST [vec:62,cpu:0] = irq:14 setup_IO_APIC_irq: dest=1 IOAPIC[0]: Set routing entry (2-14 -> 0x3e -> IRQ 14 Mode:0 Active:0) setup_IO_APIC_irq: cfg->domain=-1 (vector: 63) PRE [vec:48,cpu:0] = irq:0 PRE [vec:49,cpu:0] = irq:1 PRE [vec:50,cpu:0] = irq:2 PRE [vec:51,cpu:0] = irq:3 PRE [vec:52,cpu:0] = irq:4 PRE [vec:53,cpu:0] = irq:5 PRE [vec:54,cpu:0] = irq:6 PRE [vec:55,cpu:0] = irq:7 PRE [vec:56,cpu:0] = irq:8 PRE [vec:57,cpu:0] = irq:9 PRE [vec:58,cpu:0] = irq:10 PRE [vec:59,cpu:0] = irq:11 PRE [vec:60,cpu:0] = irq:12 PRE [vec:61,cpu:0] = irq:13 PRE [vec:62,cpu:0] = irq:14 old_vector: 63 mask: 1 PAST [vec:48,cpu:0] = irq:0 PAST [vec:49,cpu:0] = irq:1 PAST [vec:50,cpu:0] = irq:2 PAST [vec:51,cpu:0] = irq:3 PAST [vec:52,cpu:0] = irq:4 PAST [vec:53,cpu:0] = irq:5 PAST [vec:54,cpu:0] = irq:6 PAST [vec:55,cpu:0] = irq:7 PAST [vec:56,cpu:0] = irq:8 PAST [vec:57,cpu:0] = irq:9 PAST [vec:58,cpu:0] = irq:10 PAST [vec:59,cpu:0] = irq:11 PAST [vec:60,cpu:0] = irq:12 PAST [vec:61,cpu:0] = irq:13 PAST [vec:62,cpu:0] = irq:14 setup_IO_APIC_irq: dest=1 IOAPIC[0]: Set routing entry (2-15 -> 0x3f -> IRQ 15 Mode:0 Active:0) 2-16 2-17 2-18 2-19 2-20 2-21 2-22 2-23 (apicid-pin) not connected old_vector: 48 mask: 1 ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 CPU0: Intel(R) Core(TM)2 Duo CPU T8300 @ 2.40GHz stepping 06 Using local APIC timer interrupts. calibrating APIC timer ... ... lapic delta = 1246860 ... PM-Timer delta = 357950 ... PM-Timer result ok ..... delta 1246860 ..... mult: 53560370 ..... calibration result: 199497 ..... CPU clock speed is 2393.0969 MHz. ..... host bus clock speed is 199.0497 MHz. Booting processor 1 APIC 0x1 ip 0x6000 Initializing CPU#1 masked ExtINT on CPU#1 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 3072K CPU 1/0x1 -> Node 0 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 CPU1: Thermal monitoring enabled (TM2) CPU1: Intel(R) Core(TM)2 Duo CPU T8300 @ 2.40GHz stepping 06 checking TSC synchronization [CPU#0 -> CPU#1]: passed. __setup_vector_irq: vector: 48 on CPU 1 set to IRQ: 0 __setup_vector_irq: vector: 49 on CPU 1 set to IRQ: 1 __setup_vector_irq: vector: 50 on CPU 1 set to IRQ: 2 __setup_vector_irq: vector: 51 on CPU 1 set to IRQ: 3 __setup_vector_irq: vector: 52 on CPU 1 set to IRQ: 4 __setup_vector_irq: vector: 53 on CPU 1 set to IRQ: 5 __setup_vector_irq: vector: 54 on CPU 1 set to IRQ: 6 __setup_vector_irq: vector: 55 on CPU 1 set to IRQ: 7 __setup_vector_irq: vector: 56 on CPU 1 set to IRQ: 8 __setup_vector_irq: vector: 57 on CPU 1 set to IRQ: 9 __setup_vector_irq: vector: 58 on CPU 1 set to IRQ: 10 __setup_vector_irq: vector: 59 on CPU 1 set to IRQ: 11 __setup_vector_irq: vector: 60 on CPU 1 set to IRQ: 12 __setup_vector_irq: vector: 61 on CPU 1 set to IRQ: 13 __setup_vector_irq: vector: 62 on CPU 1 set to IRQ: 14 __setup_vector_irq: vector: 63 on CPU 1 set to IRQ: 15 Brought up 2 CPUs Total of 2 processors activated (9575.51 BogoMIPS). old_vector: 49 mask: 3 old_vector: 48 mask: 3 old_vector: 51 mask: 3 old_vector: 52 mask: 3 old_vector: 53 mask: 3 old_vector: 54 mask: 3 old_vector: 55 mask: 3 old_vector: 56 mask: 3 old_vector: 57 mask: 3 old_vector: 58 mask: 3 old_vector: 59 mask: 3 old_vector: 60 mask: 3 old_vector: 61 mask: 3 old_vector: 62 mask: 3 old_vector: 63 mask: 3 sizeof(vma)=184 bytes sizeof(page)=56 bytes sizeof(inode)=592 bytes sizeof(dentry)=192 bytes sizeof(ext3inode)=800 bytes sizeof(buffer_head)=104 bytes sizeof(skbuff)=232 bytes sizeof(task_struct)=5976 bytes CPU0 attaching sched-domain: domain 0: span 0-1 level MC groups: 0 1 CPU1 attaching sched-domain: domain 0: span 0-1 level MC groups: 1 0 devtmpfs: initialized regulator: core version 0.5 Time: 22:20:13 Date: 09/08/10 NET: Registered protocol family 16 ACPI: bus type pci registered PCI: MCFG configuration 0: base f8000000 segment 0 buses 0 - 63 PCI: MCFG area at f8000000 reserved in E820 PCI: Using MMCONFIG at f8000000 - fbffffff PCI: Using configuration type 1 for base access bio: create slab at 0 old_vector: 57 mask: 3 ACPI: EC: Look up EC in DSDT ACPI: Interpreter enabled ACPI: (supports S0 S3 S4 S5) ACPI: Using IOAPIC for interrupt routing ACPI: No dock devices found. ACPI: PCI Root Bridge [PCI0] (0000:00) pci 0000:00:02.0: reg 10 64bit mmio: [0xfea00000-0xfeafffff] pci 0000:00:02.0: reg 18 64bit mmio pref: [0xe0000000-0xefffffff] pci 0000:00:02.0: reg 20 io port: [0xeff8-0xefff] pci 0000:00:02.1: reg 10 64bit mmio: [0xfeb00000-0xfebfffff] pci 0000:00:1a.0: reg 20 io port: [0x6f20-0x6f3f] pci 0000:00:1a.1: reg 20 io port: [0x6f00-0x6f1f] pci 0000:00:1a.7: reg 10 32bit mmio: [0xfed1c400-0xfed1c7ff] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold pci 0000:00:1a.7: PME# disabled pci 0000:00:1b.0: reg 10 64bit mmio: [0xfe9fc000-0xfe9fffff] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold pci 0000:00:1b.0: PME# disabled pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold pci 0000:00:1c.0: PME# disabled pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold pci 0000:00:1c.1: PME# disabled pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold pci 0000:00:1c.4: PME# disabled pci 0000:00:1d.0: reg 20 io port: [0x6f80-0x6f9f] pci 0000:00:1d.1: reg 20 io port: [0x6f60-0x6f7f] pci 0000:00:1d.2: reg 20 io port: [0x6f40-0x6f5f] pci 0000:00:1d.7: reg 10 32bit mmio: [0xfed1c000-0xfed1c3ff] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold pci 0000:00:1d.7: PME# disabled pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO pci 0000:00:1f.0: quirk: region 1080-10bf claimed by ICH6 GPIO pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0900 (mask 007f) pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 006c (mask 0007) pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 0c80 (mask 003f) pci 0000:00:1f.1: reg 10 io port: [0x1f0-0x1f7] pci 0000:00:1f.1: reg 14 io port: [0x3f4-0x3f7] pci 0000:00:1f.1: reg 18 io port: [0x170-0x177] pci 0000:00:1f.1: reg 1c io port: [0x374-0x377] pci 0000:00:1f.1: reg 20 io port: [0x6fa0-0x6faf] pci 0000:00:1f.2: reg 10 io port: [0x6eb0-0x6eb7] pci 0000:00:1f.2: reg 14 io port: [0x6eb8-0x6ebb] pci 0000:00:1f.2: reg 18 io port: [0x6ec0-0x6ec7] pci 0000:00:1f.2: reg 1c io port: [0x6ec8-0x6ecb] pci 0000:00:1f.2: reg 20 io port: [0x6ee0-0x6eff] pci 0000:00:1f.2: reg 24 32bit mmio: [0xfe9fb800-0xfe9fbfff] pci 0000:00:1f.2: PME# supported from D3hot pci 0000:00:1f.2: PME# disabled pci 0000:00:1f.3: reg 10 32bit mmio: [0xfe9fb700-0xfe9fb7ff] pci 0000:00:1f.3: reg 20 io port: [0x10c0-0x10df] pci 0000:09:00.0: reg 10 64bit mmio: [0xfe8fc000-0xfe8fffff] pci 0000:09:00.0: reg 18 io port: [0xde00-0xdeff] pci 0000:09:00.0: supports D1 D2 pci 0000:09:00.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:09:00.0: PME# disabled pci 0000:00:1c.0: bridge io port: [0xd000-0xdfff] pci 0000:00:1c.0: bridge 32bit mmio: [0xfe800000-0xfe8fffff] pci 0000:0b:00.0: reg 10 64bit mmio: [0xfe7fe000-0xfe7fffff] pci 0000:0b:00.0: PME# supported from D0 D3hot D3cold pci 0000:0b:00.0: PME# disabled pci 0000:00:1c.1: bridge 32bit mmio: [0xfe700000-0xfe7fffff] pci 0000:00:1c.4: bridge io port: [0xc000-0xcfff] pci 0000:00:1c.4: bridge 32bit mmio: [0xfe400000-0xfe6fffff] pci 0000:00:1c.4: bridge 64bit mmio pref: [0xf0000000-0xf01fffff] pci 0000:02:09.0: reg 10 32bit mmio: [0xfe3ff800-0xfe3fffff] pci 0000:02:09.0: supports D1 D2 pci 0000:02:09.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:02:09.0: PME# disabled pci 0000:02:09.1: reg 10 32bit mmio: [0xfe3ff500-0xfe3ff5ff] pci 0000:02:09.1: supports D1 D2 pci 0000:02:09.1: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:02:09.1: PME# disabled pci 0000:02:09.2: reg 10 32bit mmio: [0xfe3ff600-0xfe3ff6ff] pci 0000:02:09.2: supports D1 D2 pci 0000:02:09.2: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:02:09.2: PME# disabled pci 0000:02:09.3: reg 10 32bit mmio: [0xfe3ff700-0xfe3ff7ff] pci 0000:02:09.3: supports D1 D2 pci 0000:02:09.3: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:02:09.3: PME# disabled pci 0000:00:1e.0: transparent bridge pci 0000:00:1e.0: bridge 32bit mmio: [0xfe300000-0xfe3fffff] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP05._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 9 10 *11) ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7) *10 ACPI: PCI Interrupt Link [LNKC] (IRQs 9 10 11) *5 ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 9 10 11) *0, disabled. ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 *7 9 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none vgaarb: loaded SCSI subsystem initialized libata version 3.00 loaded. usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing PCI: old code would have set cacheline size to 32 bytes, but clflush_size = 64 PCI: pci_cache_line_size set to 64 bytes NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default printing PIC contents ... PIC IMR: ffff ... PIC IRR: 0ca0 ... PIC ISR: 0000 ... PIC ELCR: 0ea0 printing local APIC contents on CPU#0/0: ... APIC ID: 00000000 (0) ... APIC VERSION: 00050014 ... APIC TASKPRI: 00000000 (00) ... APIC PROCPRI: 00000000 ... APIC LDR: 01000000 ... APIC DFR: ffffffff ... APIC SPIV: 000001ff ... APIC ISR field: 0000000000000000000000000000000000000000000000000000000000000000 ... APIC TMR field: 0000000000000000000000000000000000000000000000000000000000000000 ... APIC IRR field: 0000000000000000000000000000000000000000000000000000000000008000 ... APIC ESR: 00000000 ... APIC ICR: 000008fb ... APIC ICR2: 02000000 ... APIC LVTT: 000200ef ... APIC LVTPC: 00000400 ... APIC LVT0: 00010700 ... APIC LVT1: 00000400 ... APIC LVTERR: 000000fe ... APIC TMICT: 000030b4 ... APIC TMCCT: 00000dab ... APIC TDCR: 00000003 printing local APIC contents on CPU#1/1: ... APIC ID: 01000000 (1) ... APIC VERSION: 00050014 ... APIC TASKPRI: 00000000 (00) ... APIC PROCPRI: 00000000 ... APIC LDR: 02000000 ... APIC DFR: ffffffff ... APIC SPIV: 000001ff ... APIC ISR field: 0000000000000000000000000000000000000000000000000000000000000000 ... APIC TMR field: 0000000000000000000000000000000000000000000000000000000000000000 ... APIC IRR field: 0000000000000000000000000000000000000000000000000000000000008000 ... APIC ESR: 00000000 ... APIC ICR: 00000000 ... APIC ICR2: 00000000 ... APIC LVTT: 000200ef ... APIC LVTPC: 00010400 ... APIC LVT0: 00010700 ... APIC LVT1: 00010400 ... APIC LVTERR: 000000fe ... APIC TMICT: 000030b4 ... APIC TMCCT: 00002daf ... APIC TDCR: 00000003 number of MP IRQ sources: 15. number of IO-APIC #2 registers: 24. testing the IO APIC....................... IO APIC #2...... .... register #00: 00000000 ....... : physical APIC id: 00 ....... : Delivery Type: 0 ....... : LTS : 0 .... register #01: 00170020 ....... : max redirection entries: 0017 ....... : PRQ implemented: 0 ....... : IO APIC version: 0020 .... IRQ redirection table: NR Dst Mask Trig IRR Pol Stat Dmod Deli Vect: 00 000 1 0 0 0 0 0 0 00 01 003 0 0 0 0 0 1 1 31 02 003 0 0 0 0 0 1 1 30 03 003 0 0 0 0 0 1 1 33 04 003 0 0 0 0 0 1 1 34 05 003 0 0 0 0 0 1 1 35 06 003 0 0 0 0 0 1 1 36 07 003 0 0 0 0 0 1 1 37 08 003 0 0 0 0 0 1 1 38 09 003 0 1 0 0 0 1 1 39 0a 003 0 0 0 0 0 1 1 3A 0b 003 0 0 0 0 0 1 1 3B 0c 003 0 0 0 0 0 1 1 3C 0d 003 0 0 0 0 0 1 1 3D 0e 003 0 0 0 0 0 1 1 3E 0f 003 0 0 0 0 0 1 1 3F 10 000 1 0 0 0 0 0 0 00 11 000 1 0 0 0 0 0 0 00 12 000 1 0 0 0 0 0 0 00 13 000 1 0 0 0 0 0 0 00 14 000 1 0 0 0 0 0 0 00 15 000 1 0 0 0 0 0 0 00 16 000 1 0 0 0 0 0 0 00 17 000 1 0 0 0 0 0 0 00 IRQ to pin mappings: IRQ0 -> 0:2 IRQ1 -> 0:1 IRQ3 -> 0:3 IRQ4 -> 0:4 IRQ5 -> 0:5 IRQ6 -> 0:6 IRQ7 -> 0:7 IRQ8 -> 0:8 IRQ9 -> 0:9 IRQ10 -> 0:10 IRQ11 -> 0:11 IRQ12 -> 0:12 IRQ13 -> 0:13 IRQ14 -> 0:14 IRQ15 -> 0:15 .................................... done. hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 hpet0: 3 comparators, 64-bit 14.318180 MHz counter Switching to clocksource tsc pnp: PnP ACPI init ACPI: bus type pnp registered setup_IO_APIC_irq: cfg->domain=-1 (vector: 60) PRE [vec:48,cpu:0] = irq:0 PRE [vec:48,cpu:1] = irq:0 PRE [vec:49,cpu:0] = irq:1 PRE [vec:49,cpu:1] = irq:1 PRE [vec:50,cpu:0] = irq:2 PRE [vec:50,cpu:1] = irq:2 PRE [vec:51,cpu:0] = irq:3 PRE [vec:51,cpu:1] = irq:3 PRE [vec:52,cpu:0] = irq:4 PRE [vec:52,cpu:1] = irq:4 PRE [vec:53,cpu:0] = irq:5 PRE [vec:53,cpu:1] = irq:5 PRE [vec:54,cpu:0] = irq:6 PRE [vec:54,cpu:1] = irq:6 PRE [vec:55,cpu:0] = irq:7 PRE [vec:55,cpu:1] = irq:7 PRE [vec:56,cpu:0] = irq:8 PRE [vec:56,cpu:1] = irq:8 PRE [vec:57,cpu:0] = irq:9 PRE [vec:57,cpu:1] = irq:9 PRE [vec:58,cpu:0] = irq:10 PRE [vec:58,cpu:1] = irq:10 PRE [vec:59,cpu:0] = irq:11 PRE [vec:59,cpu:1] = irq:11 PRE [vec:60,cpu:0] = irq:12 PRE [vec:60,cpu:1] = irq:12 PRE [vec:61,cpu:0] = irq:13 PRE [vec:61,cpu:1] = irq:13 PRE [vec:62,cpu:0] = irq:14 PRE [vec:62,cpu:1] = irq:14 old_vector: 60 mask: 3 PAST [vec:48,cpu:0] = irq:0 PAST [vec:48,cpu:1] = irq:0 PAST [vec:49,cpu:0] = irq:1 PAST [vec:49,cpu:1] = irq:1 PAST [vec:50,cpu:0] = irq:2 PAST [vec:50,cpu:1] = irq:2 PAST [vec:51,cpu:0] = irq:3 PAST [vec:51,cpu:1] = irq:3 PAST [vec:52,cpu:0] = irq:4 PAST [vec:52,cpu:1] = irq:4 PAST [vec:53,cpu:0] = irq:5 PAST [vec:53,cpu:1] = irq:5 PAST [vec:54,cpu:0] = irq:6 PAST [vec:54,cpu:1] = irq:6 PAST [vec:55,cpu:0] = irq:7 PAST [vec:55,cpu:1] = irq:7 PAST [vec:56,cpu:0] = irq:8 PAST [vec:56,cpu:1] = irq:8 PAST [vec:57,cpu:0] = irq:9 PAST [vec:57,cpu:1] = irq:9 PAST [vec:58,cpu:0] = irq:10 PAST [vec:58,cpu:1] = irq:10 PAST [vec:59,cpu:0] = irq:11 PAST [vec:59,cpu:1] = irq:11 PAST [vec:60,cpu:0] = irq:12 PAST [vec:60,cpu:1] = irq:12 PAST [vec:61,cpu:0] = irq:13 PAST [vec:61,cpu:1] = irq:13 PAST [vec:62,cpu:0] = irq:14 PAST [vec:62,cpu:1] = irq:14 setup_IO_APIC_irq: dest=3 IOAPIC[0]: Set routing entry (2-12 -> 0x3c -> IRQ 12 Mode:0 Active:0) Reprogramming PIN12, dest=3 Pid: 1, comm: swapper Not tainted 2.6.32.21 #1 Call Trace: [] ioapic_write_entry+0x48/0xda [] setup_IO_APIC_irq+0x21f/0x22e [] ? irq_to_desc_alloc_node+0x16/0x188 [] io_apic_set_pci_routing+0x151/0x17c [] mp_register_gsi+0x17d/0x18f [] acpi_register_gsi+0x5b/0x64 [] pnpacpi_parse_allocated_irqresource+0x113/0x14a [] pnpacpi_allocated_resource+0x5e/0x312 [] ? acpi_ut_remove_reference+0x32/0x36 [] ? acpi_rs_get_method_data+0x3b/0x45 [] ? pnpacpi_allocated_resource+0x0/0x312 [] acpi_walk_resources+0x81/0xc9 [] pnpacpi_parse_allocated_resource+0x3a/0x7b [] pnpacpi_add_device_handler+0x180/0x20f [] acpi_ns_get_device_callback+0x146/0x163 [] ? up+0x39/0x3e [] acpi_ns_walk_namespace+0xb2/0x127 [] ? acpi_ns_get_device_callback+0x0/0x163 [] acpi_get_devices+0x5e/0x75 [] ? pnpacpi_add_device_handler+0x0/0x20f [] ? register_acpi_bus_type+0x70/0x80 [] ? pnpacpi_init+0x0/0x8c [] pnpacpi_init+0x5e/0x8c [] do_one_initcall+0x5e/0x159 [] kernel_init+0x1fd/0x257 [] child_rip+0xa/0x20 [] ? kernel_init+0x0/0x257 [] ? child_rip+0x0/0x20 setup_IO_APIC_irq: cfg->domain=-1 (vector: 49) PRE [vec:48,cpu:0] = irq:0 PRE [vec:48,cpu:1] = irq:0 PRE [vec:49,cpu:0] = irq:1 PRE [vec:49,cpu:1] = irq:1 PRE [vec:50,cpu:0] = irq:2 PRE [vec:50,cpu:1] = irq:2 PRE [vec:51,cpu:0] = irq:3 PRE [vec:51,cpu:1] = irq:3 PRE [vec:52,cpu:0] = irq:4 PRE [vec:52,cpu:1] = irq:4 PRE [vec:53,cpu:0] = irq:5 PRE [vec:53,cpu:1] = irq:5 PRE [vec:54,cpu:0] = irq:6 PRE [vec:54,cpu:1] = irq:6 PRE [vec:55,cpu:0] = irq:7 PRE [vec:55,cpu:1] = irq:7 PRE [vec:56,cpu:0] = irq:8 PRE [vec:56,cpu:1] = irq:8 PRE [vec:57,cpu:0] = irq:9 PRE [vec:57,cpu:1] = irq:9 PRE [vec:58,cpu:0] = irq:10 PRE [vec:58,cpu:1] = irq:10 PRE [vec:59,cpu:0] = irq:11 PRE [vec:59,cpu:1] = irq:11 PRE [vec:60,cpu:0] = irq:12 PRE [vec:60,cpu:1] = irq:12 PRE [vec:61,cpu:0] = irq:13 PRE [vec:61,cpu:1] = irq:13 PRE [vec:62,cpu:0] = irq:14 PRE [vec:62,cpu:1] = irq:14 old_vector: 49 mask: 3 PAST [vec:48,cpu:0] = irq:0 PAST [vec:48,cpu:1] = irq:0 PAST [vec:49,cpu:0] = irq:1 PAST [vec:49,cpu:1] = irq:1 PAST [vec:50,cpu:0] = irq:2 PAST [vec:50,cpu:1] = irq:2 PAST [vec:51,cpu:0] = irq:3 PAST [vec:51,cpu:1] = irq:3 PAST [vec:52,cpu:0] = irq:4 PAST [vec:52,cpu:1] = irq:4 PAST [vec:53,cpu:0] = irq:5 PAST [vec:53,cpu:1] = irq:5 PAST [vec:54,cpu:0] = irq:6 PAST [vec:54,cpu:1] = irq:6 PAST [vec:55,cpu:0] = irq:7 PAST [vec:55,cpu:1] = irq:7 PAST [vec:56,cpu:0] = irq:8 PAST [vec:56,cpu:1] = irq:8 PAST [vec:57,cpu:0] = irq:9 PAST [vec:57,cpu:1] = irq:9 PAST [vec:58,cpu:0] = irq:10 PAST [vec:58,cpu:1] = irq:10 PAST [vec:59,cpu:0] = irq:11 PAST [vec:59,cpu:1] = irq:11 PAST [vec:60,cpu:0] = irq:12 PAST [vec:60,cpu:1] = irq:12 PAST [vec:61,cpu:0] = irq:13 PAST [vec:61,cpu:1] = irq:13 PAST [vec:62,cpu:0] = irq:14 PAST [vec:62,cpu:1] = irq:14 setup_IO_APIC_irq: dest=3 IOAPIC[0]: Set routing entry (2-1 -> 0x31 -> IRQ 1 Mode:0 Active:0) Reprogramming PIN1, dest=3 Pid: 1, comm: swapper Not tainted 2.6.32.21 #1 Call Trace: [] ioapic_write_entry+0x48/0xda [] setup_IO_APIC_irq+0x21f/0x22e [] ? irq_to_desc_alloc_node+0x16/0x188 [] io_apic_set_pci_routing+0x151/0x17c [] mp_register_gsi+0x17d/0x18f [] acpi_register_gsi+0x5b/0x64 [] pnpacpi_parse_allocated_irqresource+0x113/0x14a [] pnpacpi_allocated_resource+0x5e/0x312 [] ? acpi_ut_remove_reference+0x32/0x36 [] ? acpi_rs_get_method_data+0x3b/0x45 [] ? pnpacpi_allocated_resource+0x0/0x312 [] acpi_walk_resources+0x81/0xc9 [] pnpacpi_parse_allocated_resource+0x3a/0x7b [] pnpacpi_add_device_handler+0x180/0x20f [] acpi_ns_get_device_callback+0x146/0x163 [] ? up+0x39/0x3e [] acpi_ns_walk_namespace+0xb2/0x127 [] ? acpi_ns_get_device_callback+0x0/0x163 [] acpi_get_devices+0x5e/0x75 [] ? pnpacpi_add_device_handler+0x0/0x20f [] ? register_acpi_bus_type+0x70/0x80 [] ? pnpacpi_init+0x0/0x8c [] pnpacpi_init+0x5e/0x8c [] do_one_initcall+0x5e/0x159 [] kernel_init+0x1fd/0x257 [] child_rip+0xa/0x20 [] ? kernel_init+0x0/0x257 [] ? child_rip+0x0/0x20 setup_IO_APIC_irq: cfg->domain=-1 (vector: 56) PRE [vec:48,cpu:0] = irq:0 PRE [vec:48,cpu:1] = irq:0 PRE [vec:49,cpu:0] = irq:1 PRE [vec:49,cpu:1] = irq:1 PRE [vec:50,cpu:0] = irq:2 PRE [vec:50,cpu:1] = irq:2 PRE [vec:51,cpu:0] = irq:3 PRE [vec:51,cpu:1] = irq:3 PRE [vec:52,cpu:0] = irq:4 PRE [vec:52,cpu:1] = irq:4 PRE [vec:53,cpu:0] = irq:5 PRE [vec:53,cpu:1] = irq:5 PRE [vec:54,cpu:0] = irq:6 PRE [vec:54,cpu:1] = irq:6 PRE [vec:55,cpu:0] = irq:7 PRE [vec:55,cpu:1] = irq:7 PRE [vec:56,cpu:0] = irq:8 PRE [vec:56,cpu:1] = irq:8 PRE [vec:57,cpu:0] = irq:9 PRE [vec:57,cpu:1] = irq:9 PRE [vec:58,cpu:0] = irq:10 PRE [vec:58,cpu:1] = irq:10 PRE [vec:59,cpu:0] = irq:11 PRE [vec:59,cpu:1] = irq:11 PRE [vec:60,cpu:0] = irq:12 PRE [vec:60,cpu:1] = irq:12 PRE [vec:61,cpu:0] = irq:13 PRE [vec:61,cpu:1] = irq:13 PRE [vec:62,cpu:0] = irq:14 PRE [vec:62,cpu:1] = irq:14 old_vector: 56 mask: 3 PAST [vec:48,cpu:0] = irq:0 PAST [vec:48,cpu:1] = irq:0 PAST [vec:49,cpu:0] = irq:1 PAST [vec:49,cpu:1] = irq:1 PAST [vec:50,cpu:0] = irq:2 PAST [vec:50,cpu:1] = irq:2 PAST [vec:51,cpu:0] = irq:3 PAST [vec:51,cpu:1] = irq:3 PAST [vec:52,cpu:0] = irq:4 PAST [vec:52,cpu:1] = irq:4 PAST [vec:53,cpu:0] = irq:5 PAST [vec:53,cpu:1] = irq:5 PAST [vec:54,cpu:0] = irq:6 PAST [vec:54,cpu:1] = irq:6 PAST [vec:55,cpu:0] = irq:7 PAST [vec:55,cpu:1] = irq:7 PAST [vec:56,cpu:0] = irq:8 PAST [vec:56,cpu:1] = irq:8 PAST [vec:57,cpu:0] = irq:9 PAST [vec:57,cpu:1] = irq:9 PAST [vec:58,cpu:0] = irq:10 PAST [vec:58,cpu:1] = irq:10 PAST [vec:59,cpu:0] = irq:11 PAST [vec:59,cpu:1] = irq:11 PAST [vec:60,cpu:0] = irq:12 PAST [vec:60,cpu:1] = irq:12 PAST [vec:61,cpu:0] = irq:13 PAST [vec:61,cpu:1] = irq:13 PAST [vec:62,cpu:0] = irq:14 PAST [vec:62,cpu:1] = irq:14 setup_IO_APIC_irq: dest=3 IOAPIC[0]: Set routing entry (2-8 -> 0x38 -> IRQ 8 Mode:0 Active:0) setup_IO_APIC_irq: cfg->domain=-1 (vector: 61) PRE [vec:48,cpu:0] = irq:0 PRE [vec:48,cpu:1] = irq:0 PRE [vec:49,cpu:0] = irq:1 PRE [vec:49,cpu:1] = irq:1 PRE [vec:50,cpu:0] = irq:2 PRE [vec:50,cpu:1] = irq:2 PRE [vec:51,cpu:0] = irq:3 PRE [vec:51,cpu:1] = irq:3 PRE [vec:52,cpu:0] = irq:4 PRE [vec:52,cpu:1] = irq:4 PRE [vec:53,cpu:0] = irq:5 PRE [vec:53,cpu:1] = irq:5 PRE [vec:54,cpu:0] = irq:6 PRE [vec:54,cpu:1] = irq:6 PRE [vec:55,cpu:0] = irq:7 PRE [vec:55,cpu:1] = irq:7 PRE [vec:56,cpu:0] = irq:8 PRE [vec:56,cpu:1] = irq:8 PRE [vec:57,cpu:0] = irq:9 PRE [vec:57,cpu:1] = irq:9 PRE [vec:58,cpu:0] = irq:10 PRE [vec:58,cpu:1] = irq:10 PRE [vec:59,cpu:0] = irq:11 PRE [vec:59,cpu:1] = irq:11 PRE [vec:60,cpu:0] = irq:12 PRE [vec:60,cpu:1] = irq:12 PRE [vec:61,cpu:0] = irq:13 PRE [vec:61,cpu:1] = irq:13 PRE [vec:62,cpu:0] = irq:14 PRE [vec:62,cpu:1] = irq:14 old_vector: 61 mask: 3 PAST [vec:48,cpu:0] = irq:0 PAST [vec:48,cpu:1] = irq:0 PAST [vec:49,cpu:0] = irq:1 PAST [vec:49,cpu:1] = irq:1 PAST [vec:50,cpu:0] = irq:2 PAST [vec:50,cpu:1] = irq:2 PAST [vec:51,cpu:0] = irq:3 PAST [vec:51,cpu:1] = irq:3 PAST [vec:52,cpu:0] = irq:4 PAST [vec:52,cpu:1] = irq:4 PAST [vec:53,cpu:0] = irq:5 PAST [vec:53,cpu:1] = irq:5 PAST [vec:54,cpu:0] = irq:6 PAST [vec:54,cpu:1] = irq:6 PAST [vec:55,cpu:0] = irq:7 PAST [vec:55,cpu:1] = irq:7 PAST [vec:56,cpu:0] = irq:8 PAST [vec:56,cpu:1] = irq:8 PAST [vec:57,cpu:0] = irq:9 PAST [vec:57,cpu:1] = irq:9 PAST [vec:58,cpu:0] = irq:10 PAST [vec:58,cpu:1] = irq:10 PAST [vec:59,cpu:0] = irq:11 PAST [vec:59,cpu:1] = irq:11 PAST [vec:60,cpu:0] = irq:12 PAST [vec:60,cpu:1] = irq:12 PAST [vec:61,cpu:0] = irq:13 PAST [vec:61,cpu:1] = irq:13 PAST [vec:62,cpu:0] = irq:14 PAST [vec:62,cpu:1] = irq:14 setup_IO_APIC_irq: dest=3 IOAPIC[0]: Set routing entry (2-13 -> 0x3d -> IRQ 13 Mode:0 Active:0) pnp 00:0a: io resource (0x1000-0x1005) overlaps 0000:00:1f.0 BAR 13 (0x1000-0x107f), disabling pnp 00:0a: io resource (0x1008-0x100f) overlaps 0000:00:1f.0 BAR 13 (0x1000-0x107f), disabling pnp 00:0b: io resource (0x1006-0x1007) overlaps 0000:00:1f.0 BAR 13 (0x1000-0x107f), disabling pnp 00:0b: io resource (0x100a-0x1059) overlaps 0000:00:1f.0 BAR 13 (0x1000-0x107f), disabling pnp 00:0b: io resource (0x1060-0x107f) overlaps 0000:00:1f.0 BAR 13 (0x1000-0x107f), disabling pnp 00:0b: io resource (0x1010-0x102f) overlaps 0000:00:1f.0 BAR 13 (0x1000-0x107f), disabling pnp: PnP ACPI: found 13 devices ACPI: ACPI bus type pnp unregistered system 00:01: iomem range 0xff800000-0xff8fffff has been reserved system 00:01: iomem range 0xffc00000-0xffcfffff has been reserved system 00:06: ioport range 0xc80-0xcff could not be reserved system 00:09: iomem range 0xfed00000-0xfed003ff has been reserved system 00:0a: ioport range 0x900-0x97f has been reserved system 00:0a: ioport range 0x4d0-0x4d1 has been reserved system 00:0b: ioport range 0xf400-0xf4fe has been reserved system 00:0b: ioport range 0x1080-0x10bf has been reserved system 00:0b: ioport range 0x10c0-0x10df has been reserved system 00:0b: ioport range 0x809-0x809 has been reserved system 00:0c: iomem range 0x0-0x9efff could not be reserved system 00:0c: iomem range 0x9f000-0x9ffff could not be reserved system 00:0c: iomem range 0xc0000-0xcffff has been reserved system 00:0c: iomem range 0xe0000-0xfffff has been reserved system 00:0c: iomem range 0x100000-0xdf66d7ff could not be reserved system 00:0c: iomem range 0xdf66d800-0xdf6fffff has been reserved system 00:0c: iomem range 0xdf700000-0xdf7fffff has been reserved system 00:0c: iomem range 0xdf700000-0xdfefffff could not be reserved system 00:0c: iomem range 0xffe00000-0xffffffff has been reserved system 00:0c: iomem range 0xffa00000-0xffbfffff has been reserved system 00:0c: iomem range 0xfec00000-0xfec0ffff could not be reserved system 00:0c: iomem range 0xfee00000-0xfee0ffff has been reserved system 00:0c: iomem range 0xfed20000-0xfed8ffff has been reserved system 00:0c: iomem range 0xfeda0000-0xfeda3fff has been reserved system 00:0c: iomem range 0xfeda4000-0xfeda4fff has been reserved system 00:0c: iomem range 0xfeda5000-0xfeda5fff has been reserved system 00:0c: iomem range 0xfeda6000-0xfeda6fff has been reserved system 00:0c: iomem range 0xfed18000-0xfed1bfff has been reserved system 00:0c: iomem range 0xf8000000-0xfbffffff has been reserved pci 0000:00:1c.0: PCI bridge, secondary bus 0000:09 pci 0000:00:1c.0: IO window: 0xd000-0xdfff pci 0000:00:1c.0: MEM window: 0xfe800000-0xfe8fffff pci 0000:00:1c.0: PREFETCH window: 0x000000f0200000-0x000000f03fffff pci 0000:00:1c.1: PCI bridge, secondary bus 0000:0b pci 0000:00:1c.1: IO window: 0x2000-0x2fff pci 0000:00:1c.1: MEM window: 0xfe700000-0xfe7fffff pci 0000:00:1c.1: PREFETCH window: 0x000000f0400000-0x000000f05fffff pci 0000:00:1c.4: PCI bridge, secondary bus 0000:0c pci 0000:00:1c.4: IO window: 0xc000-0xcfff pci 0000:00:1c.4: MEM window: 0xfe400000-0xfe6fffff pci 0000:00:1c.4: PREFETCH window: 0x000000f0000000-0x000000f01fffff pci 0000:00:1e.0: PCI bridge, secondary bus 0000:02 pci 0000:00:1e.0: IO window: disabled pci 0000:00:1e.0: MEM window: 0xfe300000-0xfe3fffff pci 0000:00:1e.0: PREFETCH window: disabled alloc irq_desc for 16 on node -1 alloc kstat_irqs on node -1 setup_IO_APIC_irq: cfg->domain=0 (vector: 0) PRE [vec:48,cpu:0] = irq:0 PRE [vec:48,cpu:1] = irq:0 PRE [vec:49,cpu:0] = irq:1 PRE [vec:49,cpu:1] = irq:1 PRE [vec:50,cpu:0] = irq:2 PRE [vec:50,cpu:1] = irq:2 PRE [vec:51,cpu:0] = irq:3 PRE [vec:51,cpu:1] = irq:3 PRE [vec:52,cpu:0] = irq:4 PRE [vec:52,cpu:1] = irq:4 PRE [vec:53,cpu:0] = irq:5 PRE [vec:53,cpu:1] = irq:5 PRE [vec:54,cpu:0] = irq:6 PRE [vec:54,cpu:1] = irq:6 PRE [vec:55,cpu:0] = irq:7 PRE [vec:55,cpu:1] = irq:7 PRE [vec:56,cpu:0] = irq:8 PRE [vec:56,cpu:1] = irq:8 PRE [vec:57,cpu:0] = irq:9 PRE [vec:57,cpu:1] = irq:9 PRE [vec:58,cpu:0] = irq:10 PRE [vec:58,cpu:1] = irq:10 PRE [vec:59,cpu:0] = irq:11 PRE [vec:59,cpu:1] = irq:11 PRE [vec:60,cpu:0] = irq:12 PRE [vec:60,cpu:1] = irq:12 PRE [vec:61,cpu:0] = irq:13 PRE [vec:61,cpu:1] = irq:13 PRE [vec:62,cpu:0] = irq:14 PRE [vec:62,cpu:1] = irq:14 vector: 65, mask: ff, cpu: 0 per_cpu:ffffffff __assign_irq_vector: setting vector_irq[73]=16 for cpu=0 __assign_irq_vector: setting vector_irq[73]=16 for cpu=1 PAST [vec:48,cpu:0] = irq:0 PAST [vec:48,cpu:1] = irq:0 PAST [vec:49,cpu:0] = irq:1 PAST [vec:49,cpu:1] = irq:1 PAST [vec:50,cpu:0] = irq:2 PAST [vec:50,cpu:1] = irq:2 PAST [vec:51,cpu:0] = irq:3 PAST [vec:51,cpu:1] = irq:3 PAST [vec:52,cpu:0] = irq:4 PAST [vec:52,cpu:1] = irq:4 PAST [vec:53,cpu:0] = irq:5 PAST [vec:53,cpu:1] = irq:5 PAST [vec:54,cpu:0] = irq:6 PAST [vec:54,cpu:1] = irq:6 PAST [vec:55,cpu:0] = irq:7 PAST [vec:55,cpu:1] = irq:7 PAST [vec:56,cpu:0] = irq:8 PAST [vec:56,cpu:1] = irq:8 PAST [vec:57,cpu:0] = irq:9 PAST [vec:57,cpu:1] = irq:9 PAST [vec:58,cpu:0] = irq:10 PAST [vec:58,cpu:1] = irq:10 PAST [vec:59,cpu:0] = irq:11 PAST [vec:59,cpu:1] = irq:11 PAST [vec:60,cpu:0] = irq:12 PAST [vec:60,cpu:1] = irq:12 PAST [vec:61,cpu:0] = irq:13 PAST [vec:61,cpu:1] = irq:13 PAST [vec:62,cpu:0] = irq:14 PAST [vec:62,cpu:1] = irq:14 setup_IO_APIC_irq: dest=3 IOAPIC[0]: Set routing entry (2-16 -> 0x49 -> IRQ 16 Mode:1 Active:1) pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:1c.0: setting latency timer to 64 alloc irq_desc for 17 on node -1 alloc kstat_irqs on node -1 setup_IO_APIC_irq: cfg->domain=0 (vector: 0) PRE [vec:48,cpu:0] = irq:0 PRE [vec:48,cpu:1] = irq:0 PRE [vec:49,cpu:0] = irq:1 PRE [vec:49,cpu:1] = irq:1 PRE [vec:50,cpu:0] = irq:2 PRE [vec:50,cpu:1] = irq:2 PRE [vec:51,cpu:0] = irq:3 PRE [vec:51,cpu:1] = irq:3 PRE [vec:52,cpu:0] = irq:4 PRE [vec:52,cpu:1] = irq:4 PRE [vec:53,cpu:0] = irq:5 PRE [vec:53,cpu:1] = irq:5 PRE [vec:54,cpu:0] = irq:6 PRE [vec:54,cpu:1] = irq:6 PRE [vec:55,cpu:0] = irq:7 PRE [vec:55,cpu:1] = irq:7 PRE [vec:56,cpu:0] = irq:8 PRE [vec:56,cpu:1] = irq:8 PRE [vec:57,cpu:0] = irq:9 PRE [vec:57,cpu:1] = irq:9 PRE [vec:58,cpu:0] = irq:10 PRE [vec:58,cpu:1] = irq:10 PRE [vec:59,cpu:0] = irq:11 PRE [vec:59,cpu:1] = irq:11 PRE [vec:60,cpu:0] = irq:12 PRE [vec:60,cpu:1] = irq:12 PRE [vec:61,cpu:0] = irq:13 PRE [vec:61,cpu:1] = irq:13 PRE [vec:62,cpu:0] = irq:14 PRE [vec:62,cpu:1] = irq:14 vector: 73, mask: ff, cpu: 0 per_cpu:10 __assign_irq_vector: setting vector_irq[81]=17 for cpu=0 __assign_irq_vector: setting vector_irq[81]=17 for cpu=1 PAST [vec:48,cpu:0] = irq:0 PAST [vec:48,cpu:1] = irq:0 PAST [vec:49,cpu:0] = irq:1 PAST [vec:49,cpu:1] = irq:1 PAST [vec:50,cpu:0] = irq:2 PAST [vec:50,cpu:1] = irq:2 PAST [vec:51,cpu:0] = irq:3 PAST [vec:51,cpu:1] = irq:3 PAST [vec:52,cpu:0] = irq:4 PAST [vec:52,cpu:1] = irq:4 PAST [vec:53,cpu:0] = irq:5 PAST [vec:53,cpu:1] = irq:5 PAST [vec:54,cpu:0] = irq:6 PAST [vec:54,cpu:1] = irq:6 PAST [vec:55,cpu:0] = irq:7 PAST [vec:55,cpu:1] = irq:7 PAST [vec:56,cpu:0] = irq:8 PAST [vec:56,cpu:1] = irq:8 PAST [vec:57,cpu:0] = irq:9 PAST [vec:57,cpu:1] = irq:9 PAST [vec:58,cpu:0] = irq:10 PAST [vec:58,cpu:1] = irq:10 PAST [vec:59,cpu:0] = irq:11 PAST [vec:59,cpu:1] = irq:11 PAST [vec:60,cpu:0] = irq:12 PAST [vec:60,cpu:1] = irq:12 PAST [vec:61,cpu:0] = irq:13 PAST [vec:61,cpu:1] = irq:13 PAST [vec:62,cpu:0] = irq:14 PAST [vec:62,cpu:1] = irq:14 setup_IO_APIC_irq: dest=3 IOAPIC[0]: Set routing entry (2-17 -> 0x51 -> IRQ 17 Mode:1 Active:1) pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 pci 0000:00:1c.1: setting latency timer to 64 pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:1c.4: setting latency timer to 64 pci 0000:00:1e.0: setting latency timer to 64 pci_bus 0000:00: resource 0 io: [0x00-0xffff] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff] pci_bus 0000:09: resource 0 io: [0xd000-0xdfff] pci_bus 0000:09: resource 1 mem: [0xfe800000-0xfe8fffff] pci_bus 0000:09: resource 2 pref mem [0xf0200000-0xf03fffff] pci_bus 0000:0b: resource 0 io: [0x2000-0x2fff] pci_bus 0000:0b: resource 1 mem: [0xfe700000-0xfe7fffff] pci_bus 0000:0b: resource 2 pref mem [0xf0400000-0xf05fffff] pci_bus 0000:0c: resource 0 io: [0xc000-0xcfff] pci_bus 0000:0c: resource 1 mem: [0xfe400000-0xfe6fffff] pci_bus 0000:0c: resource 2 pref mem [0xf0000000-0xf01fffff] pci_bus 0000:02: resource 1 mem: [0xfe300000-0xfe3fffff] pci_bus 0000:02: resource 3 io: [0x00-0xffff] pci_bus 0000:02: resource 4 mem: [0x000000-0xffffffffffffffff] NET: Registered protocol family 2 IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) TCP established hash table entries: 524288 (order: 11, 8388608 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 524288 bind 65536) TCP reno registered NET: Registered protocol family 1 pci 0000:00:02.0: Boot video device Trying to unpack rootfs image as initramfs... Freeing initrd memory: 12033k freed PCI-DMA: Using software bounce buffering for IO (SWIOTLB) DMA: Placing 64MB software IO TLB between ffff88000591e000 - ffff88000991e000 DMA: software IO TLB at phys 0x591e000 - 0x991e000 Simple Boot Flag at 0x79 set to 0x1 audit: initializing netlink socket (disabled) type=2000 audit(1283984413.657:1): initialized HugeTLB registered 2 MB page size, pre-allocated 0 pages VFS: Disk quotas dquot_6.5.2 Dquot-cache hash table entries: 512 (order 0, 4096 bytes) msgmni has been set to 7905 SELinux: Registering netfilter hooks alg: No test for stdrng (krng) Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) alloc irq_desc for 24 on node -1 alloc kstat_irqs on node -1 vector: 81, mask: ff, cpu: 0 per_cpu:11 __assign_irq_vector: setting vector_irq[89]=24 for cpu=0 __assign_irq_vector: setting vector_irq[89]=24 for cpu=1 old_vector: 89 mask: 3 pcieport 0000:00:1c.0: irq 24 for MSI/MSI-X pcieport 0000:00:1c.0: setting latency timer to 64 alloc irq_desc for 25 on node -1 alloc kstat_irqs on node -1 vector: 89, mask: ff, cpu: 0 per_cpu:18 __assign_irq_vector: setting vector_irq[97]=25 for cpu=0 __assign_irq_vector: setting vector_irq[97]=25 for cpu=1 old_vector: 97 mask: 3 pcieport 0000:00:1c.1: irq 25 for MSI/MSI-X pcieport 0000:00:1c.1: setting latency timer to 64 alloc irq_desc for 26 on node -1 alloc kstat_irqs on node -1 vector: 97, mask: ff, cpu: 0 per_cpu:19 __assign_irq_vector: setting vector_irq[105]=26 for cpu=0 __assign_irq_vector: setting vector_irq[105]=26 for cpu=1 old_vector: 105 mask: 3 pcieport 0000:00:1c.4: irq 26 for MSI/MSI-X pcieport 0000:00:1c.4: setting latency timer to 64 pci_hotplug: PCI Hot Plug PCI Core version: 0.5 pciehp: PCI Express Hot Plug Controller Driver version: 0.4 acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 acpiphp: Slot [1] registered pci-stub: invalid id string "" ACPI: AC Adapter [AC] (on-line) input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0 ACPI: Lid Switch [LID] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1 ACPI: Power Button [PBTN] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2 ACPI: Sleep Button [SBTN] ACPI: SSDT 00000000df66e4b4 002C8 (v01 PmRef Cpu0Ist 00003000 INTL 20050624) ACPI: SSDT 00000000df66de4a 005E5 (v01 PmRef Cpu0Cst 00003001 INTL 20050624) Monitor-Mwait will be used to enter C-1 state Monitor-Mwait will be used to enter C-2 state Monitor-Mwait will be used to enter C-3 state Marking TSC unstable due to TSC halts in idle Switching to clocksource hpet processor LNXCPU:00: registered as cooling_device0 ACPI: SSDT 00000000df66e77c 000C4 (v01 PmRef Cpu1Ist 00003000 INTL 20050624) ACPI: SSDT 00000000df66e42f 00085 (v01 PmRef Cpu1Cst 00003000 INTL 20050624) processor LNXCPU:01: registered as cooling_device1 thermal LNXTHERM:01: registered as thermal_zone0 ACPI: Thermal Zone [THM] (50 C) Non-volatile memory driver v1.3 Linux agpgart interface v0.103 agpgart-intel 0000:00:00.0: Intel 965GM Chipset agpgart-intel 0000:00:00.0: detected 7676K stolen memory ACPI: Battery Slot [BAT0] (battery present) agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xe0000000 Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled brd: module loaded loop: module loaded input: Macintosh mouse button emulation as /devices/virtual/input/input3 ahci 0000:00:1f.2: version 3.0 ahci 0000:00:1f.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17 alloc irq_desc for 27 on node -1 alloc kstat_irqs on node -1 vector: 105, mask: ff, cpu: 0 per_cpu:1a __assign_irq_vector: setting vector_irq[113]=27 for cpu=0 __assign_irq_vector: setting vector_irq[113]=27 for cpu=1 old_vector: 113 mask: 3 ahci 0000:00:1f.2: irq 27 for MSI/MSI-X ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x5 impl SATA mode ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ccc ems ahci 0000:00:1f.2: setting latency timer to 64 old_vector: 113 mask: 3 scsi0 : ahci scsi1 : ahci scsi2 : ahci ata1: SATA max UDMA/133 irq_stat 0x00400040, connection status changed irq 27 ata2: DUMMY ata3: SATA max UDMA/133 abar m2048@0xfe9fb800 port 0xfe9fba00 irq 27 ata_piix 0000:00:1f.1: version 2.13 ata_piix 0000:00:1f.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16 ata_piix 0000:00:1f.1: setting latency timer to 64 old_vector: 62 mask: 3 old_vector: 63 mask: 3 scsi3 : ata_piix scsi4 : ata_piix ata4: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x6fa0 irq 14 ata5: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x6fa8 irq 15 Fixed MDIO Bus: probed ata5: port disabled. ignoring. ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver alloc irq_desc for 22 on node -1 alloc kstat_irqs on node -1 setup_IO_APIC_irq: cfg->domain=0 (vector: 0) PRE [vec:48,cpu:0] = irq:0 PRE [vec:48,cpu:1] = irq:0 PRE [vec:49,cpu:0] = irq:1 PRE [vec:49,cpu:1] = irq:1 PRE [vec:50,cpu:0] = irq:2 PRE [vec:50,cpu:1] = irq:2 PRE [vec:51,cpu:0] = irq:3 PRE [vec:51,cpu:1] = irq:3 PRE [vec:52,cpu:0] = irq:4 PRE [vec:52,cpu:1] = irq:4 PRE [vec:53,cpu:0] = irq:5 PRE [vec:53,cpu:1] = irq:5 PRE [vec:54,cpu:0] = irq:6 PRE [vec:54,cpu:1] = irq:6 PRE [vec:55,cpu:0] = irq:7 PRE [vec:55,cpu:1] = irq:7 PRE [vec:56,cpu:0] = irq:8 PRE [vec:56,cpu:1] = irq:8 PRE [vec:57,cpu:0] = irq:9 PRE [vec:57,cpu:1] = irq:9 PRE [vec:58,cpu:0] = irq:10 PRE [vec:58,cpu:1] = irq:10 PRE [vec:59,cpu:0] = irq:11 PRE [vec:59,cpu:1] = irq:11 PRE [vec:60,cpu:0] = irq:12 PRE [vec:60,cpu:1] = irq:12 PRE [vec:61,cpu:0] = irq:13 PRE [vec:61,cpu:1] = irq:13 PRE [vec:62,cpu:0] = irq:14 PRE [vec:62,cpu:1] = irq:14 vector: 113, mask: ff, cpu: 0 per_cpu:1b __assign_irq_vector: setting vector_irq[121]=22 for cpu=0 __assign_irq_vector: setting vector_irq[121]=22 for cpu=1 PAST [vec:48,cpu:0] = irq:0 PAST [vec:48,cpu:1] = irq:0 PAST [vec:49,cpu:0] = irq:1 PAST [vec:49,cpu:1] = irq:1 PAST [vec:50,cpu:0] = irq:2 PAST [vec:50,cpu:1] = irq:2 PAST [vec:51,cpu:0] = irq:3 PAST [vec:51,cpu:1] = irq:3 PAST [vec:52,cpu:0] = irq:4 PAST [vec:52,cpu:1] = irq:4 PAST [vec:53,cpu:0] = irq:5 PAST [vec:53,cpu:1] = irq:5 PAST [vec:54,cpu:0] = irq:6 PAST [vec:54,cpu:1] = irq:6 PAST [vec:55,cpu:0] = irq:7 PAST [vec:55,cpu:1] = irq:7 PAST [vec:56,cpu:0] = irq:8 PAST [vec:56,cpu:1] = irq:8 PAST [vec:57,cpu:0] = irq:9 PAST [vec:57,cpu:1] = irq:9 PAST [vec:58,cpu:0] = irq:10 PAST [vec:58,cpu:1] = irq:10 PAST [vec:59,cpu:0] = irq:11 PAST [vec:59,cpu:1] = irq:11 PAST [vec:60,cpu:0] = irq:12 PAST [vec:60,cpu:1] = irq:12 PAST [vec:61,cpu:0] = irq:13 PAST [vec:61,cpu:1] = irq:13 PAST [vec:62,cpu:0] = irq:14 PAST [vec:62,cpu:1] = irq:14 setup_IO_APIC_irq: dest=3 IOAPIC[0]: Set routing entry (2-22 -> 0x79 -> IRQ 22 Mode:1 Active:1) ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 22 (level, low) -> IRQ 22 ehci_hcd 0000:00:1a.7: setting latency timer to 64 ehci_hcd 0000:00:1a.7: EHCI Host Controller ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:1a.7: debug port 1 ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported old_vector: 121 mask: 3 ehci_hcd 0000:00:1a.7: irq 22, io mem 0xfed1c400 ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00 usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: EHCI Host Controller usb usb1: Manufacturer: Linux 2.6.32.21 ehci_hcd usb usb1: SerialNumber: 0000:00:1a.7 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 4 ports detected alloc irq_desc for 20 on node -1 alloc kstat_irqs on node -1 setup_IO_APIC_irq: cfg->domain=0 (vector: 0) PRE [vec:48,cpu:0] = irq:0 PRE [vec:48,cpu:1] = irq:0 PRE [vec:49,cpu:0] = irq:1 PRE [vec:49,cpu:1] = irq:1 PRE [vec:50,cpu:0] = irq:2 PRE [vec:50,cpu:1] = irq:2 PRE [vec:51,cpu:0] = irq:3 PRE [vec:51,cpu:1] = irq:3 PRE [vec:52,cpu:0] = irq:4 PRE [vec:52,cpu:1] = irq:4 PRE [vec:53,cpu:0] = irq:5 PRE [vec:53,cpu:1] = irq:5 PRE [vec:54,cpu:0] = irq:6 PRE [vec:54,cpu:1] = irq:6 PRE [vec:55,cpu:0] = irq:7 PRE [vec:55,cpu:1] = irq:7 PRE [vec:56,cpu:0] = irq:8 PRE [vec:56,cpu:1] = irq:8 PRE [vec:57,cpu:0] = irq:9 PRE [vec:57,cpu:1] = irq:9 PRE [vec:58,cpu:0] = irq:10 PRE [vec:58,cpu:1] = irq:10 PRE [vec:59,cpu:0] = irq:11 PRE [vec:59,cpu:1] = irq:11 PRE [vec:60,cpu:0] = irq:12 PRE [vec:60,cpu:1] = irq:12 PRE [vec:61,cpu:0] = irq:13 PRE [vec:61,cpu:1] = irq:13 PRE [vec:62,cpu:0] = irq:14 PRE [vec:62,cpu:1] = irq:14 vector: 121, mask: ff, cpu: 0 per_cpu:16 __assign_irq_vector: setting vector_irq[129]=20 for cpu=0 __assign_irq_vector: setting vector_irq[129]=20 for cpu=1 PAST [vec:48,cpu:0] = irq:0 PAST [vec:48,cpu:1] = irq:0 PAST [vec:49,cpu:0] = irq:1 PAST [vec:49,cpu:1] = irq:1 PAST [vec:50,cpu:0] = irq:2 PAST [vec:50,cpu:1] = irq:2 PAST [vec:51,cpu:0] = irq:3 PAST [vec:51,cpu:1] = irq:3 PAST [vec:52,cpu:0] = irq:4 PAST [vec:52,cpu:1] = irq:4 PAST [vec:53,cpu:0] = irq:5 PAST [vec:53,cpu:1] = irq:5 PAST [vec:54,cpu:0] = irq:6 PAST [vec:54,cpu:1] = irq:6 PAST [vec:55,cpu:0] = irq:7 PAST [vec:55,cpu:1] = irq:7 PAST [vec:56,cpu:0] = irq:8 PAST [vec:56,cpu:1] = irq:8 PAST [vec:57,cpu:0] = irq:9 PAST [vec:57,cpu:1] = irq:9 PAST [vec:58,cpu:0] = irq:10 PAST [vec:58,cpu:1] = irq:10 PAST [vec:59,cpu:0] = irq:11 PAST [vec:59,cpu:1] = irq:11 PAST [vec:60,cpu:0] = irq:12 PAST [vec:60,cpu:1] = irq:12 PAST [vec:61,cpu:0] = irq:13 PAST [vec:61,cpu:1] = irq:13 PAST [vec:62,cpu:0] = irq:14 PAST [vec:62,cpu:1] = irq:14 setup_IO_APIC_irq: dest=3 IOAPIC[0]: Set routing entry (2-20 -> 0x81 -> IRQ 20 Mode:1 Active:1) ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20 ehci_hcd 0000:00:1d.7: setting latency timer to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 ehci_hcd 0000:00:1d.7: debug port 1 ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported old_vector: 129 mask: 3 ehci_hcd 0000:00:1d.7: irq 20, io mem 0xfed1c000 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb2: Product: EHCI Host Controller usb usb2: Manufacturer: Linux 2.6.32.21 ehci_hcd usb usb2: SerialNumber: 0000:00:1d.7 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 6 ports detected ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver uhci_hcd: USB Universal Host Controller Interface driver uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 uhci_hcd 0000:00:1a.0: setting latency timer to 64 uhci_hcd 0000:00:1a.0: UHCI Host Controller uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1a.0: irq 20, io base 0x00006f20 usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb3: Product: UHCI Host Controller usb usb3: Manufacturer: Linux 2.6.32.21 uhci_hcd usb usb3: SerialNumber: 0000:00:1a.0 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected alloc irq_desc for 21 on node -1 alloc kstat_irqs on node -1 setup_IO_APIC_irq: cfg->domain=0 (vector: 0) PRE [vec:48,cpu:0] = irq:0 PRE [vec:48,cpu:1] = irq:0 PRE [vec:49,cpu:0] = irq:1 PRE [vec:49,cpu:1] = irq:1 PRE [vec:50,cpu:0] = irq:2 PRE [vec:50,cpu:1] = irq:2 PRE [vec:51,cpu:0] = irq:3 PRE [vec:51,cpu:1] = irq:3 PRE [vec:52,cpu:0] = irq:4 PRE [vec:52,cpu:1] = irq:4 PRE [vec:53,cpu:0] = irq:5 PRE [vec:53,cpu:1] = irq:5 PRE [vec:54,cpu:0] = irq:6 PRE [vec:54,cpu:1] = irq:6 PRE [vec:55,cpu:0] = irq:7 PRE [vec:55,cpu:1] = irq:7 PRE [vec:56,cpu:0] = irq:8 PRE [vec:56,cpu:1] = irq:8 PRE [vec:57,cpu:0] = irq:9 PRE [vec:57,cpu:1] = irq:9 PRE [vec:58,cpu:0] = irq:10 PRE [vec:58,cpu:1] = irq:10 PRE [vec:59,cpu:0] = irq:11 PRE [vec:59,cpu:1] = irq:11 PRE [vec:60,cpu:0] = irq:12 PRE [vec:60,cpu:1] = irq:12 PRE [vec:61,cpu:0] = irq:13 PRE [vec:61,cpu:1] = irq:13 PRE [vec:62,cpu:0] = irq:14 PRE [vec:62,cpu:1] = irq:14 vector: 129, mask: ff, cpu: 0 per_cpu:14 __assign_irq_vector: setting vector_irq[137]=21 for cpu=0 __assign_irq_vector: setting vector_irq[137]=21 for cpu=1 PAST [vec:48,cpu:0] = irq:0 PAST [vec:48,cpu:1] = irq:0 PAST [vec:49,cpu:0] = irq:1 PAST [vec:49,cpu:1] = irq:1 PAST [vec:50,cpu:0] = irq:2 PAST [vec:50,cpu:1] = irq:2 PAST [vec:51,cpu:0] = irq:3 PAST [vec:51,cpu:1] = irq:3 PAST [vec:52,cpu:0] = irq:4 PAST [vec:52,cpu:1] = irq:4 PAST [vec:53,cpu:0] = irq:5 PAST [vec:53,cpu:1] = irq:5 PAST [vec:54,cpu:0] = irq:6 PAST [vec:54,cpu:1] = irq:6 PAST [vec:55,cpu:0] = irq:7 PAST [vec:55,cpu:1] = irq:7 PAST [vec:56,cpu:0] = irq:8 PAST [vec:56,cpu:1] = irq:8 PAST [vec:57,cpu:0] = irq:9 PAST [vec:57,cpu:1] = irq:9 PAST [vec:58,cpu:0] = irq:10 PAST [vec:58,cpu:1] = irq:10 PAST [vec:59,cpu:0] = irq:11 PAST [vec:59,cpu:1] = irq:11 PAST [vec:60,cpu:0] = irq:12 PAST [vec:60,cpu:1] = irq:12 PAST [vec:61,cpu:0] = irq:13 PAST [vec:61,cpu:1] = irq:13 PAST [vec:62,cpu:0] = irq:14 PAST [vec:62,cpu:1] = irq:14 setup_IO_APIC_irq: dest=3 IOAPIC[0]: Set routing entry (2-21 -> 0x89 -> IRQ 21 Mode:1 Active:1) uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 uhci_hcd 0000:00:1a.1: setting latency timer to 64 uhci_hcd 0000:00:1a.1: UHCI Host Controller uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 old_vector: 137 mask: 3 uhci_hcd 0000:00:1a.1: irq 21, io base 0x00006f00 usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb4: Product: UHCI Host Controller usb usb4: Manufacturer: Linux 2.6.32.21 uhci_hcd usb usb4: SerialNumber: 0000:00:1a.1 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 uhci_hcd 0000:00:1d.0: setting latency timer to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5 uhci_hcd 0000:00:1d.0: irq 20, io base 0x00006f80 usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb5: Product: UHCI Host Controller usb usb5: Manufacturer: Linux 2.6.32.21 uhci_hcd usb usb5: SerialNumber: 0000:00:1d.0 usb usb5: configuration #1 chosen from 1 choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 uhci_hcd 0000:00:1d.1: setting latency timer to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6 uhci_hcd 0000:00:1d.1: irq 21, io base 0x00006f60 usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb6: Product: UHCI Host Controller usb usb6: Manufacturer: Linux 2.6.32.21 uhci_hcd usb usb6: SerialNumber: 0000:00:1d.1 usb usb6: configuration #1 chosen from 1 choice hub 6-0:1.0: USB hub found hub 6-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22 uhci_hcd 0000:00:1d.2: setting latency timer to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7 uhci_hcd 0000:00:1d.2: irq 22, io base 0x00006f40 usb usb7: New USB device found, idVendor=1d6b, idProduct=0001 usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb7: Product: UHCI Host Controller usb usb7: Manufacturer: Linux 2.6.32.21 uhci_hcd usb usb7: SerialNumber: 0000:00:1d.2 usb usb7: configuration #1 chosen from 1 choice hub 7-0:1.0: USB hub found hub 7-0:1.0: 2 ports detected PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 i8042.c: Detected active multiplexing controller, rev 1.1. old_vector: 60 mask: 3 old_vector: 49 mask: 3 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX0 port at 0x60,0x64 irq 12 serio: i8042 AUX1 port at 0x60,0x64 irq 12 serio: i8042 AUX2 port at 0x60,0x64 irq 12 serio: i8042 AUX3 port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice rtc_cmos 00:04: RTC can wake from S4 rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0 old_vector: 56 mask: 3 rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs device-mapper: uevent: version 1.0.3 device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@xxxxxxxxxx cpuidle: using governor ladder cpuidle: using governor menu usbcore: registered new interface driver hiddev usbcore: registered new interface driver usbhid usbhid: v2.6:USB HID core driver nf_conntrack version 0.5.0 (16384 buckets, 65536 max) CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or sysctl net.netfilter.nf_conntrack_acct=1 to enable it. ip_tables: (C) 2000-2006 Netfilter Core Team TCP cubic registered Initializing XFRM netlink socket NET: Registered protocol family 17 PM: Resume from disk failed. registered taskstats version 1 No TPM chip found, activating TPM-bypass! Magic number: 10:225:350 rtc_cmos 00:04: setting system clock to 2010-09-08 22:20:14 UTC (1283984414) Initalizing network drop monitor service input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4 ata4.00: ATAPI: TSSTcorp DVD+/-RW TS-L632H, DW10, max UDMA/33 ata4.00: configured for UDMA/33 ata3: SATA link down (SStatus 0 SControl 300) usb 1-1: new high speed USB device using ehci_hcd and address 2 usb 1-1: New USB device found, idVendor=05a9, idProduct=2640 usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 1-1: Product: Laptop Integrated Webcam usb 1-1: Manufacturer: OmniVision Technologies, Inc. -2640-07.07.20.3 usb 1-1: configuration #1 chosen from 1 choice ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) input: PS/2 Mouse as /devices/platform/i8042/serio2/input/input5 input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio2/input/input6 usb 6-2: new low speed USB device using uhci_hcd and address 2 usb 6-2: New USB device found, idVendor=046d, idProduct=c517 usb 6-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 6-2: Product: USB Receiver usb 6-2: Manufacturer: Logitech usb 6-2: configuration #1 chosen from 1 choice input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.1/usb6/6-2/6-2:1.0/input/input7 logitech 0003:046D:C517.0001: input,hidraw0: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-0000:00:1d.1-2/input0 logitech 0003:046D:C517.0002: fixing up Logitech keyboard report descriptor input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.1/usb6/6-2/6-2:1.1/input/input8 logitech 0003:046D:C517.0002: input,hiddev96,hidraw1: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:1d.1-2/input1 ata1.00: ATA-8: TOSHIBA MK2546GSX, LB013D, max UDMA/100 ata1.00: 488397168 sectors, multi 8: LBA48 NCQ (depth 31/32), AA ata1.00: configured for UDMA/100 scsi 0:0:0:0: Direct-Access ATA TOSHIBA MK2546GS LB01 PQ: 0 ANSI: 5 sd 0:0:0:0: Attached scsi generic sg0 type 0 sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: scsi 3:0:0:0: CD-ROM TSSTcorp DVD+-RW TS-L632H DW10 PQ: 0 ANSI: 5 sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 sr 3:0:0:0: Attached scsi CD-ROM sr0 sr 3:0:0:0: Attached scsi generic sg1 type 5 sda1 sda2 sda3 sda4 < sda5 sda6 usb 7-2: new full speed USB device using uhci_hcd and address 2 sda7 > sd 0:0:0:0: [sda] Attached SCSI disk Freeing unused kernel memory: 944k freed Write protecting the kernel read-only data: 6624k dracut: dracut-005-3.fc13 udev: starting version 153 dracut: Starting plymouth daemon usb 7-2: New USB device found, idVendor=0a5c, idProduct=4500 usb 7-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 7-2: Product: BCM2045B2 usb 7-2: Manufacturer: Broadcom usb 7-2: configuration #1 chosen from 1 choice hub 7-2:1.0: USB hub found hub 7-2:1.0: 3 ports detected usb 7-2.1: new full speed USB device using uhci_hcd and address 3 usb 7-2.1: New USB device found, idVendor=413c, idProduct=8126 usb 7-2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 7-2.1: Product: BCM2045 usb 7-2.1: Manufacturer: Broadcom Corp usb 7-2.1: configuration #1 chosen from 1 choice usb 7-2.2: new full speed USB device using uhci_hcd and address 4 usb 7-2.2: New USB device found, idVendor=0a5c, idProduct=4502 usb 7-2.2: New USB device strings: Mfr=1, Product=0, SerialNumber=0 usb 7-2.2: Manufacturer: Broadcom Corp usb 7-2.2: configuration #1 chosen from 1 choice input: Broadcom Corp as /devices/pci0000:00/0000:00:1d.2/usb7/7-2/7-2.2/7-2.2:1.0/input/input9 generic-usb 0003:0A5C:4502.0003: input,hidraw2: USB HID v1.11 Keyboard [Broadcom Corp] on usb-0000:00:1d.2-2.2/input0 usb 7-2.3: new full speed USB device using uhci_hcd and address 5 dracut: Scanning devices sda7 for LVM volume groups usb 7-2.3: New USB device found, idVendor=0a5c, idProduct=4503 usb 7-2.3: New USB device strings: Mfr=1, Product=0, SerialNumber=0 usb 7-2.3: Manufacturer: Broadcom Corp usb 7-2.3: configuration #1 chosen from 1 choice input: Broadcom Corp as /devices/pci0000:00/0000:00:1d.2/usb7/7-2/7-2.3/7-2.3:1.0/input/input10 generic-usb 0003:0A5C:4503.0004: input,hidraw3: USB HID v1.11 Mouse [Broadcom Corp] on usb-0000:00:1d.2-2.3/input0 dracut: Reading all physical volumes. This may take a while... dracut: Found volume group "vg0" using metadata type lvm2 dracut: 7 logical volume(s) in volume group "vg0" now active EXT4-fs (dm-7): mounted filesystem with ordered data mode dracut: Remounting /dev/disk/by-uuid/fcb47974-dd00-4990-bcee-e2b50a0f184b with -o noatime,ro EXT4-fs (dm-7): mounted filesystem with ordered data mode dracut: Mounted root filesystem /dev/mapper/vg0-austen3a dracut: Loading SELinux policy SELinux: 8192 avtab hash slots, 199115 rules. SELinux: 8192 avtab hash slots, 199115 rules. SELinux: 9 users, 13 roles, 3316 types, 168 bools, 1 sens, 1024 cats SELinux: 77 classes, 199115 rules SELinux: Completing initialization. SELinux: Setting up existing superblocks. SELinux: initialized (dev dm-7, type ext4), uses xattr SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs SELinux: initialized (dev securityfs, type securityfs), uses genfs_contexts SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses transition SIDs SELinux: initialized (dev devpts, type devpts), uses transition SIDs SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts SELinux: initialized (dev pipefs, type pipefs), uses task SIDs SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts SELinux: initialized (dev sockfs, type sockfs), uses task SIDs SELinux: initialized (dev devtmpfs, type devtmpfs), uses transition SIDs SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs SELinux: initialized (dev proc, type proc), uses genfs_contexts SELinux: initialized (dev bdev, type bdev), uses genfs_contexts SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts type=1403 audit(1283984425.172:2): policy loaded auid=4294967295 ses=4294967295 dracut: Switching root readahead: starting udev: starting version 153 type=1400 audit(1283980830.047:3): avc: denied { mmap_zero } for pid=721 comm="vbetool" scontext=system_u:system_r:vbetool_t:s0-s0:c0.c1023 tcontext=system_u:system_r:vbetool_t:s0-s0:c0.c1023 tclass=memprotect SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts type=1400 audit(1283980840.777:4): avc: denied { module_request } for pid=1262 comm="rpc.statd" scontext=system_u:system_r:rpcd_t:s0 tcontext=system_u:system_r:kernel_t:s0 tclass=system type=1400 audit(1283980843.163:5): avc: denied { module_request } for pid=1392 comm="sendmail" scontext=system_u:system_r:sendmail_t:s0 tcontext=system_u:system_r:kernel_t:s0 tclass=system SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs SELinux: initialized (dev proc, type proc), uses genfs_contexts SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs SELinux: initialized (dev proc, type proc), uses genfs_contexts