\ \/ /___ _ __ | || | / | _ _ _ __ ___| |_ __ _| |__ | | ___ \ // _ \ '_ \ | || |_ | |__| | | | '_ \/ __| __/ _` | '_ \| |/ _ \ / \ __/ | | | |__ _|| |__| |_| | | | \__ \ || (_| | |_) | | __/ /_/\_\___|_| |_| |_|(_)_| \__,_|_| |_|___/\__\__,_|_.__/|_|\___| (XEN) Xen version 4.1-unstable (bedge@) (gcc version 4.3.3 (Ubuntu 4.3.3-5ubuntu4) ) Tue Sep 28 14:03:20 PDT 2010 (XEN) Latest ChangeSet: Tue Sep 14 18:26:10 2010 +0100 22155:5393151a737b (XEN) Bootloader: GRUB 1.98-1ubuntu7 (XEN) Command line: dummy=dummy dom0_mem=1024M dom0_max_vcpus=1 dom0_vcpus_pin=true iommu=1,passthrough,no-intremap loglvl=all loglvl_guest=all loglevl=10 debug apic=on apic_verbosity=verbose extra_guest_irqs=80 com1=115200,8n1,0x3e8,5 console=com1 console_to_ring noirqbalance xen-pciback.permissive acpi=force numa=on (XEN) Video information: (XEN) VGA is text mode 80x25, font 8x16 (XEN) VBE/DDC methods: none; EDID transfer time: 0 seconds (XEN) EDID info not retrieved because no DDC retrieval method detected (XEN) Disc information: (XEN) Found 2 MBR signatures (XEN) Found 2 EDD information structures (XEN) Xen-e820 RAM map: (XEN) 0000000000000000 - 000000000008e400 (usable) (XEN) 000000000008e400 - 00000000000a0000 (reserved) (XEN) 00000000000e0000 - 0000000000100000 (reserved) (XEN) 0000000000100000 - 00000000df780000 (usable) (XEN) 00000000df78e000 - 00000000df790000 type 9 (XEN) 00000000df790000 - 00000000df79e000 (ACPI data) (XEN) 00000000df79e000 - 00000000df7d0000 (ACPI NVS) (XEN) 00000000df7d0000 - 00000000df7e0000 (reserved) (XEN) 00000000df7ec000 - 00000000f0000000 (reserved) (XEN) 00000000fee00000 - 00000000fee01000 (reserved) (XEN) 00000000ffc00000 - 0000000100000000 (reserved) (XEN) 0000000100000000 - 0000000120000000 (usable) (XEN) ACPI: RSDP 000FAE20, 0024 (r2 ACPIAM) (XEN) ACPI: XSDT DF790100, 0084 (r1 SMCI 20100317 MSFT 97) (XEN) ACPI: FACP DF790290, 00F4 (r3 031710 FACP1136 20100317 MSFT 97) (XEN) ACPI: DSDT DF790630, 69FC (r1 1F580 1F580000 0 INTL 20051117) (XEN) ACPI: FACS DF79E000, 0040 (XEN) ACPI: APIC DF790390, 00D2 (r1 031710 APIC1136 20100317 MSFT 97) (XEN) ACPI: MCFG DF790470, 003C (r1 031710 OEMMCFG 20100317 MSFT 97) (XEN) ACPI: SLIC DF7904B0, 0176 (r1 SMCI 20100317 MSFT 97) (XEN) ACPI: OEMB DF79E040, 0093 (r1 031710 OEMB1136 20100317 MSFT 97) (XEN) ACPI: HPET DF79A630, 0038 (r1 031710 OEMHPET 20100317 MSFT 97) (XEN) ACPI: DMAR DF79E0E0, 0120 (r1 AMI OEMDMAR 1 MSFT 97) (XEN) ACPI: SSDT DF7A0470, 0363 (r1 DpgPmm CpuPm 12 INTL 20051117) (XEN) ACPI: EINJ DF79A670, 0130 (r1 AMIER AMI_EINJ 20100317 MSFT 97) (XEN) ACPI: BERT DF79A800, 0030 (r1 AMIER AMI_BERT 20100317 MSFT 97) (XEN) ACPI: ERST DF79A830, 01B0 (r1 AMIER AMI_ERST 20100317 MSFT 97) (XEN) ACPI: HEST DF79A9E0, 00A8 (r1 AMIER ABC_HEST 20100317 MSFT 97) (XEN) System RAM: 4087MB (4185144kB) (XEN) No NUMA configuration found (XEN) Faking a node at 0000000000000000-0000000120000000 (XEN) Domain heap initialised (XEN) found SMP MP-table at 000ff780 (XEN) DMI present. (XEN) Using APIC driver default (XEN) ACPI: PM-Timer IO Port: 0x808 (XEN) ACPI: ACPI SLEEP INFO: pm1x_cnt[804,0], pm1x_evt[800,0] (XEN) ACPI: wakeup_vec[df79e00c], vec_size[20] (XEN) ACPI: Local APIC address 0xfee00000 (XEN) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) (XEN) Processor #0 7:10 APIC version 21 (XEN) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) (XEN) Processor #2 7:10 APIC version 21 (XEN) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled) (XEN) Processor #4 7:10 APIC version 21 (XEN) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled) (XEN) Processor #6 7:10 APIC version 21 (XEN) ACPI: LAPIC (acpi_id[0x05] lapic_id[0x01] enabled) (XEN) Processor #1 7:10 APIC version 21 (XEN) ACPI: LAPIC (acpi_id[0x06] lapic_id[0x03] enabled) (XEN) Processor #3 7:10 APIC version 21 (XEN) ACPI: LAPIC (acpi_id[0x07] lapic_id[0x05] enabled) (XEN) Processor #5 7:10 APIC version 21 (XEN) ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled) (XEN) Processor #7 7:10 APIC version 21 (XEN) ACPI: LAPIC (acpi_id[0x09] lapic_id[0x88] disabled) (XEN) ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x89] disabled) (XEN) ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x8a] disabled) (XEN) ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x8b] disabled) (XEN) ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x8c] disabled) (XEN) ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x8d] disabled) (XEN) ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x8e] disabled) (XEN) ACPI: LAPIC (acpi_id[0x10] lapic_id[0x8f] disabled) (XEN) ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1]) (XEN) ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0]) (XEN) IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23 (XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) (XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) (XEN) ACPI: IRQ0 used by override. (XEN) ACPI: IRQ2 used by override. (XEN) ACPI: IRQ9 used by override. (XEN) Enabling APIC mode: Flat. Using 1 I/O APICs (XEN) ACPI: HPET id: 0x8086a301 base: 0xfed00000 (XEN) PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 (XEN) PCI: MCFG area at e0000000 reserved in E820 (XEN) ERST table is invalid (XEN) Using ACPI (MADT) for SMP configuration information (XEN) mapped APIC to ffff82c3ffffe000 (fee00000) (XEN) mapped IOAPIC to ffff82c3ffffd000 (fec00000) (XEN) IRQ limits: 24 GSI, 1528 MSI/MSI-X (XEN) Using scheduler: SMP Credit Scheduler (credit) (XEN) Detected 2660.050 MHz processor. (XEN) Initing memory sharing. (XEN) mce_intel.c:1161: MCA Capability: BCAST 1 SER 0 CMCI 1 firstbank 0 extended MCE MSR 0 (XEN) Intel machine check reporting enabled (XEN) Intel VT-d Snoop Control not supported. (XEN) Intel VT-d DMA Passthrough not supported. (XEN) Intel VT-d Queued Invalidation supported. (XEN) Intel VT-d Interrupt Remapping not supported. (XEN) I/O virtualisation enabled (XEN) - Dom0 mode: Relaxed (XEN) enabled ExtINT on CPU#0 (XEN) ENABLING IO-APIC IRQs (XEN) -> Using new ACK method (XEN) init IO_APIC IRQs (XEN) IO-APIC (apicid-pin) 8-0, 8-16, 8-17, 8-18, 8-19, 8-20, 8-21, 8-22, 8-23 not connected. (XEN) ..TIMER: vector=0xF0 apic1=0 pin1=2 apic2=-1 pin2=-1 (XEN) number of MP IRQ sources: 15. (XEN) number of IO-APIC #8 registers: 24. (XEN) testing the IO APIC....................... (XEN) IO APIC #8...... (XEN) .... register #00: 08000000 (XEN) ....... : physical APIC id: 08 (XEN) ....... : Delivery Type: 0 (XEN) ....... : LTS : 0 (XEN) .... register #01: 00170020 (XEN) ....... : max redirection entries: 0017 (XEN) ....... : PRQ implemented: 0 (XEN) ....... : IO APIC version: 0020 (XEN) .... IRQ redirection table: (XEN) NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect: (XEN) 00 000 00 1 0 0 0 0 0 0 00 (XEN) 01 001 01 0 0 0 0 0 1 1 30 (XEN) 02 001 01 0 0 0 0 0 1 1 F0 (XEN) 03 001 01 0 0 0 0 0 1 1 38 (XEN) 04 001 01 0 0 0 0 0 1 1 40 (XEN) 05 001 01 0 0 0 0 0 1 1 F1 (XEN) 06 001 01 0 0 0 0 0 1 1 48 (XEN) 07 001 01 0 0 0 0 0 1 1 50 (XEN) 08 001 01 0 0 0 0 0 1 1 58 (XEN) 09 001 01 1 1 0 0 0 1 1 60 (XEN) 0a 001 01 0 0 0 0 0 1 1 68 (XEN) 0b 001 01 0 0 0 0 0 1 1 70 (XEN) 0c 001 01 0 0 0 0 0 1 1 78 (XEN) 0d 001 01 0 0 0 0 0 1 1 88 (XEN) 0e 001 01 0 0 0 0 0 1 1 90 (XEN) 0f 001 01 0 0 0 0 0 1 1 98 (XEN) 10 000 00 1 0 0 0 0 0 0 00 (XEN) 11 000 00 1 0 0 0 0 0 0 00 (XEN) 12 000 00 1 0 0 0 0 0 0 00 (XEN) 13 000 00 1 0 0 0 0 0 0 00 (XEN) 14 000 00 1 0 0 0 0 0 0 00 (XEN) 15 000 00 1 0 0 0 0 0 0 00 (XEN) 16 000 00 1 0 0 0 0 0 0 00 (XEN) 17 000 00 1 0 0 0 0 0 0 00 (XEN) Using vector-based indexing (XEN) IRQ to pin mappings: (XEN) IRQ240 -> 0:2 (XEN) IRQ48 -> 0:1 (XEN) IRQ56 -> 0:3 (XEN) IRQ64 -> 0:4 (XEN) IRQ241 -> 0:5 (XEN) IRQ72 -> 0:6 (XEN) IRQ80 -> 0:7 (XEN) IRQ88 -> 0:8 (XEN) IRQ96 -> 0:9 (XEN) IRQ104 -> 0:10 (XEN) IRQ112 -> 0:11 (XEN) IRQ120 -> 0:12 (XEN) IRQ136 -> 0:13 (XEN) IRQ144 -> 0:14 (XEN) IRQ152 -> 0:15 (XEN) .................................... done. (XEN) Using local APIC timer interrupts. (XEN) calibrating APIC timer ... (XEN) ..... CPU clock speed is 2660.0150 MHz. (XEN) ..... host bus clock speed is 133.0007 MHz. (XEN) ..... bus_scale = 0x00008834 (XEN) Platform timer is 14.318MHz HPET ΓΏ(XEN) Allocated console ring of 64 KiB. (XEN) VMX: Supported advanced features: (XEN) - APIC MMIO access virtualisation (XEN) - APIC TPR shadow (XEN) - Extended Page Tables (EPT) (XEN) - Virtual-Processor Identifiers (VPID) (XEN) - Virtual NMI (XEN) - MSR direct-access bitmap (XEN) EPT supports 2MB super page. (XEN) HVM: ASIDs enabled. (XEN) HVM: VMX enabled (XEN) HVM: Hardware Assisted Paging detected. (XEN) masked ExtINT on CPU#1 (XEN) masked ExtINT on CPU#2 (XEN) masked ExtINT on CPU#3 (XEN) masked ExtINT on CPU#4 (XEN) masked ExtINT on CPU#5 (XEN) masked ExtINT on CPU#6 (XEN) masked ExtINT on CPU#7 (XEN) Brought up 8 CPUs (XEN) tmem: initialized comp=0 dedup=0 tze=0 global-lock=0 (XEN) HPET: 4 timers in total, 0 timers will be used for broadcast (XEN) ACPI sleep modes: S3 (XEN) mcheck_poll: Machine check polling timer started. (XEN) *** LOADING DOMAIN 0 *** (XEN) elf_parse_binary: phdr: paddr=0x1000000 memsz=0x8bd000 (XEN) elf_parse_binary: phdr: paddr=0x18bd000 memsz=0xd8f88 (XEN) elf_parse_binary: phdr: paddr=0x1996000 memsz=0x8c8 (XEN) elf_parse_binary: phdr: paddr=0x1997000 memsz=0x1d6798 (XEN) elf_parse_binary: phdr: paddr=0x1b6e000 memsz=0xce0000 (XEN) elf_parse_binary: memory: 0x1000000 -> 0x284e000 (XEN) elf_xen_parse_note: GUEST_OS = "linux" (XEN) elf_xen_parse_note: GUEST_VERSION = "2.6" (XEN) elf_xen_parse_note: XEN_VERSION = "xen-3.0" (XEN) elf_xen_parse_note: VIRT_BASE = 0xffffffff80000000 (XEN) elf_xen_parse_note: ENTRY = 0xffffffff81b6e200 (XEN) elf_xen_parse_note: HYPERCALL_PAGE = 0xffffffff81009000 (XEN) elf_xen_parse_note: FEATURES = "!writable_page_tables|pae_pgdir_above_4gb" (XEN) elf_xen_parse_note: PAE_MODE = "yes" (XEN) elf_xen_parse_note: LOADER = "generic" (XEN) elf_xen_parse_note: unknown xen elf note (0xd) (XEN) elf_xen_parse_note: SUSPEND_CANCEL = 0x1 (XEN) elf_xen_parse_note: HV_START_LOW = 0xffff800000000000 (XEN) elf_xen_parse_note: PADDR_OFFSET = 0x0 (XEN) elf_xen_addr_calc_check: addresses: (XEN) virt_base = 0xffffffff80000000 (XEN) elf_paddr_offset = 0x0 (XEN) virt_offset = 0xffffffff80000000 (XEN) virt_kstart = 0xffffffff81000000 (XEN) virt_kend = 0xffffffff8284e000 (XEN) virt_entry = 0xffffffff81b6e200 (XEN) p2m_base = 0xffffffffffffffff (XEN) Xen kernel: 64-bit, lsb, compat32 (XEN) Dom0 kernel: 64-bit, PAE, lsb, paddr 0x1000000 -> 0x284e000 (XEN) PHYSICAL MEMORY ARRANGEMENT: (XEN) Dom0 alloc.: 0000000110000000->0000000118000000 (229376 pages to be allocated) (XEN) VIRTUAL MEMORY ARRANGEMENT: (XEN) Loaded kernel: ffffffff81000000->ffffffff8284e000 (XEN) Init. ramdisk: ffffffff8284e000->ffffffff83ea7600 (XEN) Phys-Mach map: ffffffff83ea8000->ffffffff840a8000 (XEN) Start info: ffffffff840a8000->ffffffff840a84b4 (XEN) Page tables: ffffffff840a9000->ffffffff840ce000 (XEN) Boot stack: ffffffff840ce000->ffffffff840cf000 (XEN) TOTAL: ffffffff80000000->ffffffff84400000 (XEN) ENTRY ADDRESS: ffffffff81b6e200 (XEN) Dom0 has maximum 1 VCPUs (XEN) elf_load_binary: phdr 0 at 0xffffffff81000000 -> 0xffffffff818bd000 (XEN) elf_load_binary: phdr 1 at 0xffffffff818bd000 -> 0xffffffff81995f88 (XEN) elf_load_binary: phdr 2 at 0xffffffff81996000 -> 0xffffffff819968c8 (XEN) elf_load_binary: phdr 3 at 0xffffffff81997000 -> 0xffffffff81b6d798 (XEN) elf_load_binary: phdr 4 at 0xffffffff81b6e000 -> 0xffffffff81c2c000 (XEN) Scrubbing Free RAM: ..............................done. (XEN) trace.c:90:d32767 calc_tinfo_first_offset: NR_CPUs 128, offset_in_bytes 258, t_info_first_offset 65 (XEN) Xen trace buffers: disabled (XEN) Std. Loglevel: All (XEN) Guest Loglevel: All (XEN) *** Serial input -> DOM0 (type 'CTRL-a' three times to switch input to Xen) (XEN) Freed 192kB init memory. mapping kernel into physical memory Xen: setup ISA identity maps about to get started... [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.32.23-3-rollback-to-18-config (root@opal) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #1 SMP Wed Sep 29 07:55:02 PDT 2010 [ 0.000000] Command line: dummy=dummy root=/dev/mapper/system-dom0_0 ro earlyprintk=xen loglevel=10 debug acpi=force console=hvc0,115200n8 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] released 0 pages of unused memory [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] Xen: 0000000000000000 - 000000000008e400 (usable) [ 0.000000] Xen: 000000000008e400 - 0000000000100000 (reserved) [ 0.000000] Xen: 0000000000100000 - 0000000040000000 (usable) [ 0.000000] Xen: 00000000df78e000 - 00000000df790000 type 9 [ 0.000000] Xen: 00000000df790000 - 00000000df79e000 (ACPI data) [ 0.000000] Xen: 00000000df79e000 - 00000000df7d0000 (ACPI NVS) [ 0.000000] Xen: 00000000df7d0000 - 00000000df7e0000 (reserved) [ 0.000000] Xen: 00000000df7ec000 - 00000000f0000000 (reserved) [ 0.000000] Xen: 00000000fec00000 - 00000000fec01000 (reserved) [ 0.000000] Xen: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] Xen: 00000000ffc00000 - 0000000100000000 (reserved) [ 0.000000] Xen: 0000000100000000 - 000000027f780000 (usable) [ 0.000000] bootconsole [xenboot0] enabled [ 0.000000] DMI present. [ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it. [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0x27f780 max_arch_pfn = 0x400000000 [ 0.000000] x86 PAT enabled: cpu 0, old 0x50100070406, new 0x7010600070106 [ 0.000000] last_pfn = 0x40000 max_arch_pfn = 0x400000000 [ 0.000000] initial memory mapped : 0 - 20000000 [ 0.000000] init_memory_mapping: 0000000000000000-0000000040000000 [ 0.000000] 0000000000 - 0040000000 page 4k [ 0.000000] kernel direct mapping tables up to 40000000 @ 100000-302000 [ 0.000000] init_memory_mapping: 0000000100000000-000000027f780000 [ 0.000000] 0100000000 - 027f780000 page 4k [ 0.000000] kernel direct mapping tables up to 27f780000 @ 40ce000-54d5000 [ 0.000000] RAMDISK: 0284e000 - 03ea7600 [ 0.000000] ACPI: RSDP 00000000000fae20 00024 (v02 ACPIAM) [ 0.000000] ACPI: XSDT 00000000df790100 00084 (v01 SMCI 20100317 MSFT 00000097) [ 0.000000] ACPI: FACP 00000000df790290 000F4 (v03 031710 FACP1136 20100317 MSFT 00000097) [ 0.000000] ACPI: DSDT 00000000df790630 069FC (v01 1F580 1F580000 00000000 INTL 20051117) [ 0.000000] ACPI: FACS 00000000df79e000 00040 [ 0.000000] ACPI: APIC 00000000df790390 000D2 (v01 031710 APIC1136 20100317 MSFT 00000097) [ 0.000000] ACPI: MCFG 00000000df790470 0003C (v01 031710 OEMMCFG 20100317 MSFT 00000097) [ 0.000000] ACPI: SLIC 00000000df7904b0 00176 (v01 SMCI 20100317 MSFT 00000097) [ 0.000000] ACPI: OEMB 00000000df79e040 00093 (v01 031710 OEMB1136 20100317 MSFT 00000097) [ 0.000000] ACPI: HPET 00000000df79a630 00038 (v01 031710 OEMHPET 20100317 MSFT 00000097) [ 0.000000] ACPI: XMAR 00000000df79e0e0 00120 (v01 AMI OEMDMAR 00000001 MSFT 00000097) [ 0.000000] ACPI: SSDT 00000000df7a0470 00363 (v01 DpgPmm CpuPm 00000012 INTL 20051117) [ 0.000000] ACPI: EINJ 00000000df79a670 00130 (v01 AMIER AMI_EINJ 20100317 MSFT 00000097) [ 0.000000] ACPI: BERT 00000000df79a800 00030 (v01 AMIER AMI_BERT 20100317 MSFT 00000097) [ 0.000000] ACPI: ERST 00000000df79a830 001B0 (v01 AMIER AMI_ERST 20100317 MSFT 00000097) [ 0.000000] ACPI: HEST 00000000df79a9e0 000A8 (v01 AMIER ABC_HEST 20100317 MSFT 00000097) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-000000027f780000 [ 0.000000] Bootmem setup node 0 0000000000000000-000000027f780000 [ 0.000000] NODE_DATA [0000000000010000 - 0000000000013fff] [ 0.000000] bootmap [0000000000014000 - 0000000000063eef] pages 50 [ 0.000000] (10 early reservations) ==> bootmem [0000000000 - 027f780000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [00040a9000 - 00040ce000] XEN PAGETABLES ==> [00040a9000 - 00040ce000] [ 0.000000] #2 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] [ 0.000000] #3 [0001000000 - 0002724318] TEXT DATA BSS ==> [0001000000 - 0002724318] [ 0.000000] #4 [000284e000 - 0003ea7600] RAMDISK ==> [000284e000 - 0003ea7600] [ 0.000000] #5 [0003ea8000 - 00040a9000] XEN START INFO ==> [0003ea8000 - 00040a9000] [ 0.000000] #6 [0100000000 - 027f780000] XEN EXTRA ==> [0100000000 - 027f780000] [ 0.000000] #7 [0002725000 - 000272f284] BRK ==> [0002725000 - 000272f284] [ 0.000000] #8 [0000100000 - 00002da000] PGTABLE ==> [0000100000 - 00002da000] [ 0.000000] #9 [00040ce000 - 0004cd0000] PGTABLE ==> [00040ce000 - 0004cd0000] [ 0.000000] found SMP MP-table at [ffff8800000ff780] ff780 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x0027f780 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[3] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000008e [ 0.000000] 0: 0x00000100 -> 0x00040000 [ 0.000000] 0: 0x00100000 -> 0x0027f780 [ 0.000000] On node 0 totalpages: 1832702 [ 0.000000] DMA zone: 104 pages used for memmap [ 0.000000] DMA zone: 477 pages reserved [ 0.000000] DMA zone: 3385 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 26520 pages used for memmap [ 0.000000] DMA32 zone: 231528 pages, LIFO batch:31 [ 0.000000] Normal zone: 39881 pages used for memmap [ 0.000000] Normal zone: 1530807 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x03] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x05] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x09] lapic_id[0x88] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x89] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x8a] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x8b] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x8c] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x8d] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x8e] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x10] lapic_id[0x8f] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 8, version 0, address 0xfec00000, GSI 0-0 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ERROR: Unable to locate IOAPIC for GSI 2 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ERROR: Unable to locate IOAPIC for GSI 9 [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000 [ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 256 [ 0.000000] PM: Registered nosave memory: 000000000008e000 - 000000000008f000 [ 0.000000] PM: Registered nosave memory: 000000000008f000 - 0000000000100000 [ 0.000000] PM: Registered nosave memory: 0000000040000000 - 00000000df78e000 [ 0.000000] PM: Registered nosave memory: 00000000df78e000 - 00000000df790000 [ 0.000000] PM: Registered nosave memory: 00000000df790000 - 00000000df79e000 [ 0.000000] PM: Registered nosave memory: 00000000df79e000 - 00000000df7d0000 [ 0.000000] PM: Registered nosave memory: 00000000df7d0000 - 00000000df7e0000 [ 0.000000] PM: Registered nosave memory: 00000000df7e0000 - 00000000df7ec000 [ 0.000000] PM: Registered nosave memory: 00000000df7ec000 - 00000000f0000000 [ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000fec00000 [ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000 [ 0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fee00000 [ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000 [ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ffc00000 [ 0.000000] PM: Registered nosave memory: 00000000ffc00000 - 0000000100000000 [ 0.000000] Allocating PCI resources starting at 40000000 (gap: 40000000:9f78e000) [ 0.000000] Booting paravirtualized kernel on Xen [ 0.000000] Xen version: 4.1-unstable (preserve-AD) (dom0) [ 0.000000] NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:1 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 478 pages/cpu @ffff880010305000 s1927064 r8192 d22632 u1957888 [ 0.000000] pcpu-alloc: s1927064 r8192 d22632 u1957888 alloc=478*4096 [ 0.000000] pcpu-alloc: [0] 0 [ 2.258011] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1765720 [ 2.258021] Policy zone: Normal [ 2.258037] Kernel command line: dummy=dummy root=/dev/mapper/system-dom0_0 ro earlyprintk=xen loglevel=10 debug acpi=force console=hvc0,115200n8 [ 2.258103] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 2.258526] Initializing CPU#0 [ 2.265409] DMA: Placing 64MB software IO TLB between ffff8800104ec000 - ffff8800144ec000 [ 2.265432] DMA: software IO TLB at phys 0x104ec000 - 0x144ec000 [ 2.265440] xen_swiotlb_fixup: buf=ffff8800104ec000 size=67108864 [ 2.290889] xen_swiotlb_fixup: buf=ffff88001454c000 size=32768 [ 2.474497] Memory: 729368k/10477056k available (6053k kernel code, 3146248k absent, 6601440k reserved, 3762k data, 2600k init) [ 2.474586] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 2.474708] Hierarchical RCU implementation. [ 2.474751] NR_IRQS:4352 nr_irqs:512 [ 2.474880] xen: --> irq=0 [ 2.474896] xen: --> irq=1 [ 2.474909] xen: --> irq=2 [ 2.474922] xen: --> irq=3 [ 2.474934] xen: --> irq=4 [ 2.474946] xen: --> irq=5 [ 2.474958] xen: --> irq=6 [ 2.474970] xen: --> irq=7 [ 2.474983] xen: --> irq=8 [ 2.474995] xen: --> irq=9 [ 2.475007] xen: --> irq=10 [ 2.475019] xen: --> irq=11 [ 2.475032] xen: --> irq=12 [ 2.475044] xen: --> irq=13 [ 2.475056] xen: --> irq=14 [ 2.475069] xen: --> irq=15 [ 2.475089] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 2.475098] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 2.475107] xen: sci override: source_irq=9 global_irq=9 trigger=c polarity=1 [ 2.475115] xen: registering gsi 9 triggering 0 polarity 0 [ 2.475124] xen_allocate_pirq: returning irq 9 for gsi 9 [ 2.475132] xen: --> irq=9 [ 2.475144] xen: acpi sci 9 [ 2.477073] Console: colour VGA+ 80x25 [ 2.477101] console [hvc0] enabled, bootconsole disabled [ 2.477101] console [hvc0] enabled, bootconsole disabled [ 2.477140] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar [ 2.477167] ... MAX_LOCKDEP_SUBCLASSES: 8 [ 2.477181] ... MAX_LOCK_DEPTH: 48 [ 2.477196] ... MAX_LOCKDEP_KEYS: 8191 [ 2.477214] ... CLASSHASH_SIZE: 4096 [ 2.477232] ... MAX_LOCKDEP_ENTRIES: 16384 [ 2.477250] ... MAX_LOCKDEP_CHAINS: 32768 [ 2.477268] ... CHAINHASH_SIZE: 16384 [ 2.477286] memory used by lock dependency info: 6367 kB [ 2.477332] per task-struct memory footprint: 2688 bytes [ 2.490205] allocated 73400320 bytes of page_cgroup [ 2.490235] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 2.490872] ODEBUG: 9 of 9 active objects replaced [ 2.490979] Xen: using vcpuop timer interface [ 2.490998] installing Xen timer for CPU 0 [ 2.491056] alloc irq_desc for 511 on node 0 [ 2.491077] alloc kstat_irqs on node 0 [ 2.491143] Detected 2660.050 MHz processor. [ 2.491218] Calibrating delay loop (skipped), value calculated using timer frequency.. 5320.10 BogoMIPS (lpj=26600500) [ 2.491339] Security Framework initialized [ 2.491362] SELinux: Disabled at boot. [ 2.493176] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 2.495559] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 2.496320] Mount-cache hash table entries: 256 [ 2.497576] Initializing cgroup subsys ns [ 2.497597] Initializing cgroup subsys cpuacct [ 2.497627] Initializing cgroup subsys memory [ 2.497714] Initializing cgroup subsys devices [ 2.497735] Initializing cgroup subsys freezer [ 2.497754] Initializing cgroup subsys net_cls [ 2.497905] CPU: L1 I cache: 32K, L1 D cache: 32K [ 2.497929] CPU: L2 cache: 256K [ 2.497942] CPU: L3 cache: 8192K [ 2.497958] CPU 0/0x0 -> Node 0 [ 2.497972] CPU: Unsupported number of siblings 16 [ 2.497991] mce: CPU supports 9 MCE banks [ 2.498037] Performance Events: unsupported p6 CPU model 26 no PMU driver, software events only. [ 2.498081] SMP alternatives: switching to UP code [ 2.536897] Freeing SMP alternatives: 39k freed [ 2.536965] ACPI: Core revision 20090903 [ 2.591390] ftrace: converting mcount calls to 0f 1f 44 00 00 [ 2.591417] ftrace: allocating 24577 entries in 97 pages [ 2.597765] alloc irq_desc for 510 on node 0 [ 2.597791] alloc kstat_irqs on node 0 [ 2.597822] alloc irq_desc for 509 on node 0 [ 2.597842] alloc kstat_irqs on node 0 [ 2.597871] alloc irq_desc for 508 on node 0 [ 2.597891] alloc kstat_irqs on node 0 [ 2.597919] alloc irq_desc for 507 on node 0 [ 2.597939] alloc kstat_irqs on node 0 [ 2.598500] Brought up 1 CPUs [ 2.598577] CPU0 attaching NULL sched-domain. [ 2.599237] devtmpfs: initialized [ 2.603969] Grant table initialized [ 2.603988] regulator: core version 0.5 [ 2.604061] Time: 18:30:32 Date: 09/29/10 [ 2.604353] NET: Registered protocol family 16 [ 2.604787] alloc irq_desc for 506 on node 0 [ 2.604811] alloc kstat_irqs on node 0 [ 2.606236] ACPI: bus type pci registered [ 2.606428] sync cpu 0 get result 1 max_id 7 [ 2.606503] sync cpu 1 get result 1 max_id 7 [ 2.606598] sync cpu 2 get result 1 max_id 7 [ 2.606665] sync cpu 3 get result 1 max_id 7 [ 2.606731] sync cpu 4 get result 1 max_id 7 [ 2.606797] sync cpu 5 get result 1 max_id 7 [ 2.606864] sync cpu 6 get result 1 max_id 7 [ 2.606935] sync cpu 7 get result 1 max_id 7 [ 2.606960] alloc irq_desc for 505 on node 0 [ 2.606980] alloc kstat_irqs on node 0 [ 2.607379] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 [ 2.607407] PCI: MCFG area at e0000000 reserved in E820 [ 2.747460] PCI: Using MMCONFIG at e0000000 - efffffff [ 2.747480] PCI: Using configuration type 1 for base access [ 2.757543] bio: create slab at 0 [ 2.765867] ERROR: Unable to locate IOAPIC for GSI 9 [ 2.765963] ACPI: EC: Look up EC in DSDT [ 2.781730] ACPI Warning for \_SB_._OSC: Return type mismatch - found Integer, expected Buffer (20090903/nspredef-1006) [ 2.781801] \_SB_:_OSC evaluation returned wrong type [ 2.781821] _OSC request data:1 6 [ 2.789104] ACPI: Executed 1 blocks of module-level executable AML code [ 2.847222] ACPI: Interpreter enabled [ 2.847241] ACPI: (supports S0 S1 S4 S5) [ 2.847440] ACPI: Using IOAPIC for interrupt routing [ 2.910301] ACPI Warning: Incorrect checksum in table [OEMB] - 64, should be 60 (20090903/tbutils-314) [ 2.911757] ACPI: No dock devices found. [ 2.913826] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 2.914348] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold [ 2.914380] pci 0000:00:00.0: PME# disabled [ 2.914673] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 2.914702] pci 0000:00:01.0: PME# disabled [ 2.914993] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold [ 2.915022] pci 0000:00:03.0: PME# disabled [ 2.915312] pci 0000:00:05.0: PME# supported from D0 D3hot D3cold [ 2.915341] pci 0000:00:05.0: PME# disabled [ 2.915658] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold [ 2.915687] pci 0000:00:07.0: PME# disabled [ 2.915977] pci 0000:00:09.0: PME# supported from D0 D3hot D3cold [ 2.916006] pci 0000:00:09.0: PME# disabled [ 2.916989] pci 0000:00:16.0: reg 10 64bit mmio: [0xfa0fc000-0xfa0fffff] [ 2.917270] pci 0000:00:16.1: reg 10 64bit mmio: [0xfa0f8000-0xfa0fbfff] [ 2.917546] pci 0000:00:16.2: reg 10 64bit mmio: [0xfa0f4000-0xfa0f7fff] [ 2.917848] pci 0000:00:16.3: reg 10 64bit mmio: [0xfa0f0000-0xfa0f3fff] [ 2.918133] pci 0000:00:16.4: reg 10 64bit mmio: [0xfa0ec000-0xfa0effff] [ 2.918459] pci 0000:00:16.5: reg 10 64bit mmio: [0xfa0e8000-0xfa0ebfff] [ 2.918744] pci 0000:00:16.6: reg 10 64bit mmio: [0xfa0e4000-0xfa0e7fff] [ 2.919028] pci 0000:00:16.7: reg 10 64bit mmio: [0xfa0e0000-0xfa0e3fff] [ 2.919375] pci 0000:00:1a.0: reg 20 io port: [0x7c00-0x7c1f] [ 2.919660] pci 0000:00:1a.1: reg 20 io port: [0x7880-0x789f] [ 2.919917] pci 0000:00:1a.2: reg 20 io port: [0x7800-0x781f] [ 2.920180] pci 0000:00:1a.7: reg 10 32bit mmio: [0xfa0de000-0xfa0de3ff] [ 2.920371] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold [ 2.920400] pci 0000:00:1a.7: PME# disabled [ 2.920649] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 2.920679] pci 0000:00:1c.0: PME# disabled [ 2.920925] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 2.920954] pci 0000:00:1c.1: PME# disabled [ 2.921201] pci 0000:00:1d.0: reg 20 io port: [0x7480-0x749f] [ 2.921458] pci 0000:00:1d.1: reg 20 io port: [0x7400-0x741f] [ 2.921715] pci 0000:00:1d.2: reg 20 io port: [0x7080-0x709f] [ 2.921978] pci 0000:00:1d.7: reg 10 32bit mmio: [0xfa0dc000-0xfa0dc3ff] [ 2.922169] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 2.922199] pci 0000:00:1d.7: PME# disabled [ 2.922646] pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO [ 2.922678] pci 0000:00:1f.0: quirk: region 0500-053f claimed by ICH6 GPIO [ 2.922704] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 4700 (mask 0097) [ 2.922733] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 03e8 (mask 000f) [ 2.922763] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 1640 (mask 000f) [ 2.922792] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 4 PIO at 0ca0 (mask 000f) [ 2.923028] pci 0000:00:1f.2: reg 10 io port: [0x6480-0x6487] [ 2.923064] pci 0000:00:1f.2: reg 14 io port: [0x7000-0x7003] [ 2.923099] pci 0000:00:1f.2: reg 18 io port: [0x6c00-0x6c07] [ 2.923134] pci 0000:00:1f.2: reg 1c io port: [0x6880-0x6883] [ 2.923169] pci 0000:00:1f.2: reg 20 io port: [0x6800-0x681f] [ 2.923205] pci 0000:00:1f.2: reg 24 32bit mmio: [0xfa0da000-0xfa0da7ff] [ 2.923337] pci 0000:00:1f.2: PME# supported from D3hot [ 2.923362] pci 0000:00:1f.2: PME# disabled [ 2.923478] pci 0000:00:1f.3: reg 10 64bit mmio: [0xfa0d8000-0xfa0d80ff] [ 2.923541] pci 0000:00:1f.3: reg 20 io port: [0x400-0x41f] [ 2.923780] pci 0000:01:00.0: reg 10 64bit mmio: [0xfa500000-0xfa5fffff] [ 2.923817] pci 0000:01:00.0: reg 18 io port: [0x9800-0x98ff] [ 2.923852] pci 0000:01:00.0: reg 1c io port: [0x9400-0x94ff] [ 2.923901] pci 0000:01:00.0: reg 20 64bit mmio: [0xfa3f8000-0xfa3fffff] [ 2.923936] pci 0000:01:00.0: reg 30 32bit mmio pref: [0xfa400000-0xfa4fffff] [ 2.924187] pci 0000:01:00.1: reg 10 64bit mmio: [0xfa200000-0xfa2fffff] [ 2.924223] pci 0000:01:00.1: reg 18 io port: [0x9000-0x90ff] [ 2.924258] pci 0000:01:00.1: reg 1c io port: [0x8800-0x88ff] [ 2.924307] pci 0000:01:00.1: reg 20 64bit mmio: [0xfa3f0000-0xfa3f7fff] [ 2.924343] pci 0000:01:00.1: reg 30 32bit mmio pref: [0xfa100000-0xfa1fffff] [ 2.925013] pci 0000:00:01.0: bridge io port: [0x8000-0x9fff] [ 2.925043] pci 0000:00:01.0: bridge 32bit mmio: [0xfa100000-0xfa5fffff] [ 2.925575] pci 0000:04:00.0: reg 10 64bit mmio: [0xfaa00000-0xfaafffff] [ 2.925611] pci 0000:04:00.0: reg 18 io port: [0xb800-0xb8ff] [ 2.925647] pci 0000:04:00.0: reg 1c io port: [0xb400-0xb4ff] [ 2.925695] pci 0000:04:00.0: reg 20 64bit mmio: [0xfa8f8000-0xfa8fffff] [ 2.925731] pci 0000:04:00.0: reg 30 32bit mmio pref: [0xfa900000-0xfa9fffff] [ 2.925980] pci 0000:04:00.1: reg 10 64bit mmio: [0xfa700000-0xfa7fffff] [ 2.926016] pci 0000:04:00.1: reg 18 io port: [0xb000-0xb0ff] [ 2.926051] pci 0000:04:00.1: reg 1c io port: [0xa800-0xa8ff] [ 2.926100] pci 0000:04:00.1: reg 20 64bit mmio: [0xfa8f0000-0xfa8f7fff] [ 2.926136] pci 0000:04:00.1: reg 30 32bit mmio pref: [0xfa600000-0xfa6fffff] [ 2.926784] pci 0000:00:07.0: bridge io port: [0xa000-0xbfff] [ 2.926813] pci 0000:00:07.0: bridge 32bit mmio: [0xfa600000-0xfaafffff] [ 2.926955] pci 0000:05:00.0: reg 10 io port: [0xc000-0xc0ff] [ 2.927005] pci 0000:05:00.0.0: reg 30 32bit mmio pref: [0xfac00000-0xfadfffff] [ 2.927204] pci 0000:05:00.0: supports D1 D2 [ 2.927281] pci 0000:05:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 2.927518] pci 0000:00:09.0: bridge io port: [0xc000-0xcfff] [ 2.927546] pci 0000:00:09.0: bridge 32bit mmio: [0xfab00000-0xfadfffff] [ 2.927730] pci 0000:06:00.0: reg 10 32bit mmio: [0xfaee0000-0xfaefffff] [ 2.927789] pci 0000:06:00.0: reg 18 io port: [0xdc00-0xdc1f] [ 2.927830] pci 0000:06:00.0: reg 1c 32bit mmio: [0xfaedc000-0xfaedffff] [ 2.928045] pci 0000:06:00.0: PME# supported from D0 D3hot D3cold [ 2.928076] pci 0000:06:00.0: PME# disabled [ 2.928544] pci 0000:00:1c.0: bridge io port: [0xd000-0xdfff] [ 2.928575] pci 0000:00:1c.0: bridge 32bit mmio: [0xfae00000-0xfaefffff] [ 2.928753] pci 0000:07:00.0: reg 10 32bit mmio: [0xfafe0000-0xfaffffff] [ 2.928812] pci 0000:07:00.0: reg 18 io port: [0xec00-0xec1f] [ 2.928852] pci 0000:07:00.0: reg 1c 32bit mmio: [0xfafdc000-0xfafdffff] [ 2.929039] pci 0000:07:00.0: PME# supported from D0 D3hot D3cold [ 2.929070] pci 0000:07:00.0: PME# disabled [ 2.929565] pci 0000:00:1c.1: bridge io port: [0xe000-0xe0xf9ffffff] [ 2.929789] pci 0000:08:04.0: reg 14 32bit mmio: [0xfbefc000-0xfbefffff] [ 2.929825] pci 0000:08:04.0: reg 18 32bit mmio: [0xfb000000-0xfb7fffff] [ 2.930093] pci 0000:00:1e.0: transparent bridge [ 2.930125] pci 0000:00:1e.0: bridge 32bit mmio: [0xfb000000-0xfbefffff] [ 2.930160] pci 0000:00:1e.0: bridge 64bit mmio pref: [0xf9800000-0xf9ffffff] [ 2.930302] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 2.934036] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] [ 2.935155] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT] [ 2.935536] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P5._PRT] [ 2.936022] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE1._PRT] [ 2.936459] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE3._PRT] [ 2.936862] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE5._PRT] [ 2.937265] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE7._PRT] [ 2.937696] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE9._PRT] (XEN) PCI add device 00:00.0 (XEN) PCI add device 00:01.0 (XEN) PCI add device 00:03.0 (XEN) PCI add device 00:05.0 (XEN) PCI add dev(XEN) PCI add device 00:14.3 (XEN) PCI add device 00:16.0 (XEN) PCI add device 00:16.1 (XEN) PCI add device 00:16.2 (XEN) PCI add device 00:16.3 (XEN) PCI add device 00:16.4 (XEN) PCI add device 00:16.5 (XEN) PCI add device 00:16.6 (XEN) PCI add device 00:16.7 (XEN) PCI add device 00:1a.0 (XEN) PCI add device 00:1a.1 (XEN) PCI add device 00:1a.2 (XEN) PCI add device 00:1a.7 (XEN) PCI add device 00:1c.0 (1f.3 (XEN) PCI add device 01:00.0 (XEN) PCI add devi0.0 (XEN) PCI add device 04:00.1 (XEN) PCI add device 05:00.0 (XEN) PCI add device 06:00.0 (XEN) PCI add device 07:00.0 (XEN) PCI add device 08:04.0 [ 3.144031] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 10 *11 12 14 15) [ 3.144519] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 6 7 *10 11 12 14 15) [ 3.144973] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 10 11 12 14 *15) [ 3.145453] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 11 12 *14 15) [ 3.145946] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12 14 15) *0, disabled. [ 3.146423] ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 6 7 10 11 12 14 15) [ 3.146883] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 6 7 10 11 12 14 15) *0, disabled. [ 3.147385] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 *4 6 7 10 11 12 14 15) [ 3.147802] xen_balloon: Initialising balloon driver with page order 0. [ 3.147932] last_pfn = 0x27f780 max_arch_pfn = 0x400000000 [ 3.180818] vgaarb: device added: PCI:0000:08:04.0,decodes=io+mem,owns=io+mem,locks=none [ 3.180862] vgaarb: loaded [ 3.181354] SCSI subsystem initialized [ 3.181582] libata version 3.00 loaded. [ 3.182052] usbcore: registered new interface driver usbfs [ 3.182171] usbcore: registered new interface driver hub [ 3.182327] usbcore: registered new device driver usb [ 3.182724] PCI: Using ACPI for IRQ routing [ 3.202146] PCI: Discovered peer bus ff (XEN) PCI add device ff:00.0 (XEN) PCI add device ff:00.1 (XEN) PCI add device ff:02.0 (XEN) PCI add device ff:02.1 (XEN) PCI add device ff:03.0 (XEN) PCI add device ff:03.1 (XEN) PCI add device ff:03.4 (XEN) PCI add device ff:04.0 (XEN) PCI add device ff:04.1 (XEN) PCI add device ff:04.2 (XEN) PCI add device ff:04.3 (XEN) PCI add device ff:05.0 (XEN) PCI add device ff:05.1 (XEN) PCI add device ff:05.2 (XEN) PCI add device ff:05.3 (XEN) PCI add device ff:06.0 (XEN) PCI add device ff:06.1 (XEN) PCI add device ff:06.2 (XEN) PCI add device ff:06.3 [ 3.209770] NetLabel: Initializing [ 3.209788] NetLabel: domain hash size = 128 [ 3.209804] NetLabel: protocols = UNLABELED CIPSOv4 [ 3.209966] NetLabel: unlabeled traffic allowed by default [ 3.210865] Switching to clocksource xen [ 3.211265] kstop/0 used greatest stack depth: 6440 bytes left [ 3.277318] pnp: PnP ACPI init [ 3.277418] ACPI: bus type pnp registered [ 3.280976] xen: registering gsi 8 triggering 1 polarity 0 [ 3.281000] xen_allocate_pirq: returning irq 8 for gsi 8 [ 3.281018] xen: --> irq=8 [ 3.281509] xen: registering gsi 13 triggering 1 polarity 0 [ 3.281560] xen_allocate_pirq: returning irq 13 for gsi 13 [ 3.281577] xen: --> irq=13 [ 3.288598] xen: registering gsi 7 triggering 1 polarity 0 [ 3.288621] xen_allocate_pirq: returning irq 7 for gsi 7 [ 3.288639] xen: --> irq=7 [ 3.292082] xen: registering gsi 5 triggering 1 polarity 0 [ 3.292105] xen_allocate_pirq: returning irq 5 for gsi 5 [ 3.292123] xen: --> irq=5 [ 3.292134] Already setup the GSI :5 [ 3.302924] pnp: PnP ACPI: found 15 devices [ 3.302944] ACPI: ACPI bus type pnp unregistered [ 3.302996] system 00:01: iomem range 0xfbf00000-0xfbffffff has been reserved [ 3.303025] system 00:01: iomem range 0xfc000000-0xfcffffff has been reserved [ 3.303053] system 00:01: iomem range 0xfd000000-0xfdffffff has been reserved [ 3.303080] system 00:01: iomem range 0xfe000000-0xfebfffff has been reserved [ 3.303108] system 00:01: iomem range 0xfec8a000-0xfec8afff has been reserved [ 3.303136] system 00:01: iomem range 0xfed10000-0xfed10fff has been reserved [ 3.303190] system 00:08: ioport range 0x164e-0x164f has been reserved [ 3.303233] system 00:09: ioport range 0xa00-0xa0f has been reserved [ 3.303258] system 00:09: ioport range 0xca0-0xcaf has been reserved [ 3.303302] system 00:0a: ioport range 0x4d0-0x4d1 has been reserved [ 3.303326] system 00:0a: ioport range 0x800-0x87f has been reserved [ 3.303355] system 00:0a: ioport range 0x500-0x57f could not be reserved [ 3.303380] system 00:0a: iomem range 0xfed1c000-0xfed1ffff has been reserved [ 3.303408] system 00:0a: iomem range 0xfed20000-0xfed3ffff has been reserved [ 3.303436] system 00:0a: iomem range 0xfed40000-0xfed8ffff has been reserved [ 3.303500] system 00:0c: iomem range 0xfec00000-0xfec00fff could not be reserved [ 3.303529] system 00:0c: iomem range 0xfee00000-0xfee00fff has been reserved [ 3.303580] system 00:0d: iomem range 0xe0000000-0xefffffff has been reserved [ 3.303631] system 00:0e: iomem range 0x0-0x9ffff could not be reserved [ 3.303659] system 00:0e: iomem range 0xc0000-0xcffff could not be reserved [ 3.303687] system 00:0e: iomem range 0xe0000-0xfffff could not be reserved [ 3.303744] system 00:0e: iomem range 0x100000-0xdfffffff could not be reserved [ 3.303776] system 00:0e: iomem range 0xfed90000-0xffffffff could not be reserved [ 3.309282] PM-Timer failed consistency check (0x0xffffff) - aborting. [ 3.309835] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 [ 3.309862] pci 0000:00:01.0: IO window: 0x8000-0x9fff [ 3.309890] pci 0000:00:01.0: MEM window: 0xfa100000-0xfa5fffff [ 3.309918] pci 0000:00:01.0: PREFETCH window: disab[ 4.051341] ata1: SATA link down (SStatus 0 SControl 300) [ 4.061358] usb 1-5: new high speed USB device using ehci_hcd and address 2 [ 4.227671] usb 1-5: New USB device found, idVendor=046b, idProduct=ff92 [ 4.227739] usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 4.227812] usb 1-5: Product: Composite Device [ 4.227858] usb 1-5: Manufacturer: American Megatrends Inc. [ 4.227906] usb 1-5: SerialNumber: serial [ 4.228422] usb 1-5: configuration #1 chosen from 1 choice [ 4.421330] ata2: SATA link down (SStatus 0 SControl 300) [ 4.491347] usb 2-4: new high speed USB device using ehci_hcd and address 2 [ 4.644841] usb 2-4: New USB device found, idVendor=154b, idProduct=0034 [ 4.644910] usb 2-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 4.6449 4.645018] usb 2-4: Manufacturer: PNY Technologies [ 4.645068] usb 2-4: SerialNumber: AA9A020100020334 [ 4.645544] usb 2-4: configuration #1 chosen from 1 choice [ 4.791328] ata3: SATA link down (SStatus 0 SControl 300) [ 4.921347] usb 5-2: new full speed USB device using uhci_hcd and addre[ 5.096888] usb 5-2: N #1 chosen from 1 choice [ 5.561336] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 5.563392] ata4.00: ATA-8: ST3500320AS, SD1A, max UDMA/133 [ 5.563437] ata4.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 5.565772] ata4.00: configured for UDMA/133 [ 5.582364] scsi 3:0:0:0: Direct-Access ATA ST3500320AS SD1A PQ: 0 ANSI: 5 [ 5.583960] sd 3:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB) [ 5.584504] sd 3:0:0:0: [sda] Write Protect is off [ 5.584548] sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 5.584829] sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 5.586480] sda: [ 5.587979] sd 3:0:0:0: Attached scsi generic sg0 type 0 [ 5.612178] sda1 sda2 < sda5 > [ 5.623061] sd 3:0:0:0: [sda] Attached SCSI disk [ 5.931326] ata5: SATA link down (SStatus 0 SControl 300) [ 6.301325] ata6: SATA link down (SStatus 0 SControl 300) [ 6.323505] Freeing unused kernel memory: 2600k freed [ 6.325471] Write protecting the kernel read-only data: 8912k [ 6.345108] busybox used greatest stack depth: 5432 bytes left [ 6.362955] exe used greatest stack depth: 4584 bytes left Loading, please wait... [ 6.416754] udev: starting version 151 [ 7.212947] e1000e: Intel(R) PRO/1000 Network Driver - 1.0.2-k2 [ 7.212994] e1000e: Copyright (c) 1999-2008 Intel Corporation. [ 7.213219] xen: registering gsi 16 triggering 0 polarity 1 [ 7.213246] xen_allocate_pirq: returning irq 16 for gsi 16 [ 7.213270] xen: --> irq=16 [ 7.213285] Already setup the GSI :16 [ 7.213304] e1000e 0000:06:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 7.213394] e1000e 0000:06:00.0: setting latency timer to 64 [ 7.213883] alloc irq_desc for 494 on node 0 [ 7.213916] alloc kstat_irqs on node 0 [ 7.214073] alloc irq_desc for 493 on node 0 [ 7.214099] alloc kstat_irqs on node 0 [ 7.214247] alloc irq_desc for 492 on node 0 [ 7.214274] alloc kstat_irqs on node 0 [ 7.352150] Initializing USB Mass Storage driver... [ 7.361610] usbcore: registered new interface driver hiddev [ 7.363576] scsces [ 7.3674l Keyboard and Mouse as /devices/pci0000:00/0000:00:1a.2/usb5/5-2/5-2:1.0/input,hidraw0: USB] on usb-0000:00 7.369179] usb-storage: waiting for device to settle before scanning [ 7.387102] 0000:06:00.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:30:48:d7:9b:e8 [ 7.387146] 0000:06:00.0: eth0: Intel(R) PRO/1000 Network Connection [ 7.387257] 0000:06:00.0: eth0: MAC: 3, PHY: 8, PBA No: 0101ff-0ff [ 7.389730] scsi7 : SCSI emulation for USB Mass Storage devices [ 7.391530] input: American Megatrends Inc. Virtual Keyboard and Mouse as /devices/pci0000:00/0000:00:1a.2/usb5/5-2/5-2:1.1/input/input3 [ 7.392120] generic-usb 0003:046B:FF10.0002: input,hidraw1: USB HID v1.10 Mouse [American Megatrends Inc. Virtual Keyboard and Mouse] on usb-0000:00:1a.2-2/input1 [ 7.392349] usbcore: registered new interface driver usbhid [ 7.392380] usbhid: v2.6:USB HID core driver [ 7.392841] modprobe used greatest stack depth: 3920 bytes left [ 7.411223] usbcore: registered new interface driver usb-storage [ 7.411265] USB Mass Storage support registered. [ 7.412634] usb-storage: device found at 2 [ 7.412666] usb-storage: waiting for device to settle before scanning [ 7.413580] xen: registering gsi 17 triggering 0 polarity 1 [ 7.413612] xen_allocate_pirq: returning irq 17 for gsi 17 [ 7.413644] xen: --> irq=17 [ 7.413665] Already setup the GSI :17 [ 7.413692] e1000e 0000:07:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 7.413796] e1000e 0000:07:00.0: setting latency timer to 64 [ 7.414278] alloc irq_desc for 491 on node 0 [ 7.414305] alloc kstat_irqs on node 0 [ 7.414488] alloc irq_desc for 490 on node 0 [ 7.414514] alloc kstat_irqs on node 0 [ 7.414661] alloc irq_desc for 489 on node 0 [ 7.414699] alloc kstat_irqs on node 0 [ 7.581805] 0000:07:00.0: eth1: (PCI Express:2.5GB/s:Width x1) 00:30:48:d7:9b:e9 [ 7.581858] 0000:07:00.0: eth1: Intel(R) PRO/1000 Network Connection [ 7.581968] 0000:07:00.0: eth1: MAC: 3, PHY: 8, PBA No: 0101ff-0ff [ 8.294506] EXT3-fs: INFO: recovery required on readonly filesystem. [ 8.294549] EXT3-fs: write access will be enabled during recovery. [ 9.414352] kjournald starting. Commit interval 5 seconds [ 9.414570] EXT3-fs: dm-2: orphan cleanup on readonly fs [ 9.414639] ext3_orphan_cleanup: deleting unreferenced inode 273097 [ 9.415279] EXT3-fs: dm-2: 1 orphan inode deleted [ 9.415323] EXT3-fs: recovery complete. [ 9.424076] EXT3-fs: mounted filesystem with ordered data mode. [ 9.424803] exe used greatest stack depth: 3912 bytes left init: ureadahead main process (408) terminated with status 5 [ 10.354773] plymouthd used greatest stack depth: 3344 bytes left [ 12.411947] uect is off [ 0:0:0: [sdb] Assuming drive cache: write through [ 12.424779] sd 7:0:0:0: [sdb] Assuming drive cache: write through [ 12.424881] sdb: sdb1 sdb2 sdb3 [ 12.428909] sd 7:0:0:0: [sdb] Assuming drive cache: write through [ 12.428980] sd 7:0:0:0: [sdb] Attached SCSI removable disk [ 12.441854] usb-storage: device scan complete [ 12.450305] scsi 6:0:0:0: CD-ROM AMI Virtual CDROM 1.00 PQ: 0 ANSI: 0 CCS [ 12.452171] scsi 6:0:0:1: Direct-Access AMI Virtual Floppy 1.00 PQ: 0 ANSI: 0 CCS [ 12.475926] sr0: scsi-1 drive [ 12.475974] Uniform CD-ROM driver Revision: 3.20 [ 12.477025] sr 6:0:0:0: Attached scsi CD-ROM sr0 [ 12.477515] sr 6:0:0:0: Attached scsi generic sg2 type 5 [ 12.478984] sd 6:0:0:1: Attached scsi generic sg3 type 0 [ 12.487029] sd 6:0:0:1: [sdc] Attached SCSI removable disk init: nss_ldap: could not connect to any LDAP server as (null) - Can't contact LDAP server init: nss_ldap: failed to bind to LDAP server ldapi:///: Can't contact LDAP server init: nss_ldap: reconnecting to LDAP server... init: nss_ldap: could not connect to any LDAP server as (null) - Can't contact LDAP server init: nss_ldap: failed to bind to LDAP server ldapi:///: Can't contact LDAP server init: nss_ldap: reconnecting to LDAP server (sleeping 1 seconds)... init: nss_ldap: could not connect to any LDAP server as (null) - Can't contact LDAP server init: nss_ldap: failed to bind to LDAP server ldapi:///: Can't contact LDAP server init: nss_ldap: could not search LDAP server - Server is unavailable init: nss_ldap: could not connect to any LDAP server as (null) - Can't contact LDAP server init: nss_ldap: failed to bind to LDAP server ldapi:///: Can't contact LDAP server init: nss_ldap: reconnecting to LDAP server... init: nss_ldap: could not connect to any LDAP server as (null) - Can't contact LDAP server init: nss_ldap: failed to bind to LDAP server ldapi:///: Can't contact LDAP server init: nss_ldap: reconnecting to LDAP server (sleeping 1 seconds)... init: nss_ldap: could not connect to any LDAP server as (null) - Can't contact LDAP server init: nss_ldap: failed to bind to LDAP server ldapi:///: Can't contact LDAP server init: nss_ldap: could not search LDAP server - Server is unavailable fsck from util-linux-ng 2.17.2 fsck from util-linux-ng 2.17.2 e2fsck 1.41.11 (14-Mar-2010) e2fsck 1.41.11 (14-Mar-2010) /dev/mapper/system-dom0_0: clean, 61534/305216 files, 337248/1220608 blocks /dev/mapper/system-common: recovering journal /dev/mapper/system-common: clean, 105/28024832 files, 1812113/112082944 blocks init: ureadahead-other main process (882) terminated with status 4 init: ureadahead-other main process (885) terminated with status 4 * Enable login on console  [ OK ] * Config osa partitions ...done. * Check for hostname changes...  [ OK ] ...done. * Setting sensors limits  No sensors found! Make sure you loaded all the kernel drivers you need. Try sensors-detect to find out which these are. No sensors found! Make sure you loaded all the kernel drivers you need. Try sensors-detect to find out which these are. [ OK ] * Initializing random number generator...  [ OK ] ...done. * Setting up X server socket directory /tmp/.X11-unix...  [ OK ] * Setting up ICE socket directory /tmp/.ICE-unix...  [ OK ] Starting OpenLDAP: slapd. /etc/rc2.d/S19xen-watchdog: line 21: /etc/init.d/functions: No such file or directory Starting domain watchdog daemon: /etc/rc2.d/S19xen-watchdog: line 30: success: command not found /etc/rc2.d/S19xen-watchdog: line 30: failure: command not found Starting xenstored....[ 25.392035] XENBUS: Unable to read cpu state Setting domain 0 name... Starting xenconsoled... * Exporting directories for NFS kernel daemon...  [ OK ] * Starting NFS kernel daemon  [ OK ] * Starting internet superserver inetd  [ OK ] Starting openntpd: * Starting Postfix Mail Transport Agent postfix  [ OK ] * Starting network management services:  * Starting the system activity data collector sadc  [ OK ] There is already a pid file /var/run/dhclient.eth0.pid with pid 1028 killed old client process, removed PID file Internet Systems Consortium DHCP Client V3.1.3 Copyright 2004-2009 Internet Systems Consortium. All rights reserved. For info, please visit https://www.isc.org/software/dhcp/ Listening on LPF/eth0/00:30:48:d7:9b:e8 Sending on LPF/eth0/00:30:48:d7:9b:e8 Sending on Socket/fallback DHCPRELEASE on eth0 to 135.149.75.113 port 67 Internet Systems Consortium DHCP Client V3.1.3 Copyright 2004-2009 Internet Systems Consortium. All rights reserved. For info, please visit https://www.isc.org/software/dhcp/ Listening on LPF/eth0/00:30:48:d7:9b:e8 Sending on LPF/eth0/00:30:48:d7:9b:e8 Sending on Socket/fallback DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 4 DHCPOFFER of 135.149.78.230 from 135.149.76.1 DHCPREQUEST of 135.149.78.230 on eth0 to 255.255.255.255 port 67 DHCPACK of 135.149.78.230 from 135.149.76.1 bound to 135.149.78.230 -- renewal in 470110 seconds. start-stop-daemon: warning: failed to kill 1197: No such process * Checking LDAP configuration ...done. * Starting ipmi drivers  [ OK ] * Setting core file location...  [ OK ] * Restoring resolver state...  [ OK ] * Enable syscore webapp * Enable dpmcore webapp * Enable dpmstat webapp * Starting web server apache2  [ OK ] * Checking tomcat configuration ...done. * Starting Tomcat servlet engine tomcat6  Using CATALINA_BASE: /var/lib/tomcat6 Using CATALINA_HOME: /usr/share/tomcat6 Using CATALINA_TMPDIR: /tmp/tomcat6-tmp Using JRE_HOME: /usr/lib/jvm/java-6-openjdk Using CLASSPATH: /usr/share/tomcat6/bin/bootstrap.jar [ OK ] collectd has been disabled - see /etc/default/collectd. * Recording successful boot for GRUB ...done. * Running local boot scripts (/etc/rc.local)  [ OK ] 6.0.15-01 kaan-04 login: [-- MARK -- Wed Sep 29 19:00:00 2010] [-- MARK -- Wed Sep 29 20:00:00 2010] [-- MARK -- Wed Sep 29 21:00:01 2010] [-- MARK -- Wed Sep 29 22:00:00 2010] [-- MARK -- Wed Sep 29 23:00:00 2010] [-- MARK -- Thu Sep 30 00:00:00 2010] [-- MARK -- Thu Sep 30 01:00:00 2010] [-- MARK -- Thu Sep 30 02:00:01 2010] [-- MARK -- Thu Sep 30 03:00:00 2010] [-- MARK -- Thu Sep 30 04:00:00 2010] [-- MARK -- Thu Sep 30 05:00:00 2010] [-- MARK -- Thu Sep 30 06:00:00 2010] [-- MARK -- Thu Sep 30 07:00:00 2010] root Password: Last login: Wed Sep 29 10:50:10 PDT 2010 on hvc0 Linux kaan-04 2.6.32.23-3-rollback-to-18-config #1 SMP Wed Sep 29 07:55:02 PDT 2010 x86_64 GNU/Linux DPM-8800 6.0.15-01 Welcome to Ubuntu! * Documentation: https://help.ubuntu.com/ 0 packages can be updated. 0 updates are security updates. 7skaan-04:~# sh \H:\w$ kaan-04:~# zsh # 0 kaan-04  ~ #> (XEN) tmem: all pools frozen for all domains (XEN) tmem: all pools thawed for all domains (XEN) tmem: all pools frozen for all domains (XEN) tmem: all pools thawed for all domains mapping kernel into physical memory about to get started... [46287.941296] BUG: soft lockup - CPU#0 stuck for 61s! [swapper:0] [46353.441235] BUG: soft lockup - CPU#0 stuck for 61s! [swapper:0] [46418.941235] BUG: soft lockup - CPU#0 stuck for 61s! [swapper:0] [46484.431236] BUG: soft lockup - CPU#0 stuck for 61s! [swapper:0] [46549.931234] BUG: soft lockup - CPU#0 stuck for 61s! [swapper:0] [46615.431234] BUG: soft lockup - CPU#0 stuck for 61s! [swapper:0] [46680.931235] BUG: soft lockup - CPU#0 stuck for 61s! [swapper:0] [46746.431234] BUG: soft lockup - CPU#0 stuck for 61s! [swapper:0] [46811.931234] BUG: soft lockup - CPU#0 stuck for 61s! [swapper:0]