|
|
|
|
|
|
|
|
|
|
xen-devel
Re: [Xen-devel] Problem: Pattern with vertical colored lines on the dom0
Hi Jean,
many thanks for this hint! This saved me a lot of time searching through
the specs.
Am 24.09.2010 schrieb Jean Guyader:
> The problem we saw with that the bit 10 of the GCC (offset 0x52 on the
> PCH config space)
> wasn't set after the bios. This bit probably enable the shadow GTT
> (created with the GTT + vt-d).
Yes, the same problem here!
I found the following patch, maybe something similar would help here too?
https://patchwork.kernel.org/patch/132771
So I have to hit the bios development :-(
> The vertical stripes means GTT fault.
>
> Jean
Many thanks!
Dietmar.
--
Company details: http://ts.fujitsu.com/imprint.html
_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-devel
|
|
|
|
|