Re: [Xen-devel] Cannot load latest 2.6.32.10 kernel on AMD quad-core

[Gerry Reno <greno@xxxxxxxxxxx>]

On 04/26/2010 05:52 PM, Pasi Kärkkäinen wrote:
> On Mon, Apr 26, 2010 at 05:26:54PM -0400, Gerry Reno wrote:
>    
> > On 04/26/2010 04:04 PM, Pasi Kärkkäinen wrote:
> >      
> > > On Mon, Apr 26, 2010 at 12:12:13AM -0400, Gerry Reno wrote:
> > >        
> > > > On 04/25/2010 10:10 PM, Gerry Reno wrote:
> > > >          
> > > > > On 04/25/2010 06:15 PM, Gerry Reno wrote:
> > > > >            
> > > > > > Gerry Reno wrote:
> > > > > >              
> > > > > > > Boris Derzhavets wrote:
> > > > > > >                
> > > > > > > > Per Wiki:-
> > > > > > > >
> > > > > > > > 2) If your computer running Xen doesn't have a real physical
> > > > > > > > serial port you can add a PCI add-on serial card with a DB9
> > > > > > > > serial connector. This is a good option for many computers.
> > > > > > > >
> > > > > > > > seems to be the cheapest solution. No matter for AMD or Intel.
> > > > > > > > Thanks Pasi once again.
> > > > > > > >
> > > > > > > > Boris.
> > > > > > > >
> > > > > > > >
> > > > > > > >
> > > > > > > > -
> > > > > > > >
> > > > > > > >                  
> > > > > > > I'll check if there are any open slots and see if I can find an
> > > > > > > addon serial card.
> > > > > > >                
> > > > > > <snip>
> > > > > >
> > > > > > Well, I could not find even one local electronics/computer store that
> > > > > > carried a serial port card.  Had to order it online which will take
> > > > > > some time.  Maybe I can capture a video of the boot sequence.
> > > > > >
> > > > > > -Gerry
> > > > > >
> > > > > >              
> > > > > I tried to capture some video of the pv_ops dom0 2.6.32.10 boot
> > > > > sequence problem on Gigabyte AMD hardware and I posted it on youtube.
> > > > > Here's the link:  http://www.youtube.com/watch?v=OcuwH7S-qZA
> > > > > It was a little fuzzy before the upload but got real fuzzy afterwards.
> > > > > But I think you can make out the critical parts.
> > > > >
> > > > > -Gerry
> > > > >            
> > > > I uploaded another take and it came out a little better:
> > > > http://www.youtube.com/watch?v=n7fW7yjrIEM
> > > >
> > > >          
> > > You seem to be missing most of the dom0 linux kernel boot messages..
> > >
> > > Please paste your grub.conf.
> > >
> > > -- Pasi
> > >
> > >
> > >        
> > Pasi, my grub.conf is attached.
> >
> >      
> Ok, fix it to be like this:
>
> module /vmlinuz-2.6.32.10 root=/dev/mapper/vg--grp--01--23--02--2-LogVol00 
> dummy=dummy ro earlyprintk=xen console=hvc0 console=ttyS0 
> console=ttyUSB0,115200n8 text
>
> aka remove "quiet" and add "earlyprintk=xen console=hvc0"
>
> -- Pasi
>
>    
Pasi, this gave some more output.  Sorry the video is fuzzy but this 
happens by youtube postprocessing.  Here is new link:  
http://www.youtube.com/watch?v=jePyapeHpSI
-Gerry



_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-devel