On Fri, Apr 16, 2010 at 05:07:42PM +0200, Sander Eikelenboom wrote:
> Hi All,
>
> I'm hopelessly behind with reading xen-devel and testing, but today i tried
> xen-4.0.1-rc1-pre, but it doesn't seem to work for me.
>
> Previous working setup:
> - Xen-4.0.0-rc6.gz
> - Dom0 Kernel 2.6.31.12-pvops
> - Debian GNU/Linux Lenny
>
> - PCI passthrough of 3 USB controllers and one sound card
>
>
> Tried:
> - Xen-4.0.1-rc1-pre.gz
> - Dom0 Kernel 2.6.31.13-pvops
> - Debian GNU/Linux Lenny
>
> PCI passthrough doesn't work, devices don't appear with lspci in guests, domU
> kernels haven't changed.
Yikes! I am still at some Xen4.0.0-rc<something> so haven't seen this.
Looking at the source code this is a grant transfer, which is enabled
by GNTTABOP_transfer hypercall. Which looks to be used by the netback module.
So does this disappear if you don't have the 'vif=<adsad>' option in your guest
config file?
>
> xm dmesg reports:
> (XEN) mm.c:3847:d10 Bad page 00000000001beab4: ed=ffff830151210000(10),
> sd=ffff830151210000, caf=8000000000000002, taf=7400000000000001
> (XEN) mm.c:3847:d10 Bad page 00000000001beab4: ed=ffff830151210000(10),
> sd=ffff830151210000, caf=8000000000000002, taf=7400000000000001
> (XEN) mm.c:3847:d10 Bad page 00000000001beab4: ed=ffff830151210000(10),
> sd=ffff830151210000, caf=8000000000000002, taf=7400000000000001
> (XEN) mm.c:3847:d10 Bad page 00000000001beab4: ed=ffff830151210000(10),
> sd=ffff830151210000, caf=8000000000000002, taf=7400000000000001
> (XEN) mm.c:3847:d10 Bad page 00000000001beab4: ed=ffff830151210000(10),
> sd=ffff830151210000, caf=8000000000000002, taf=7400000000000001
> (XEN) mm.c:3847:d10 Bad page 00000000001beab4: ed=ffff830151210000(10),
> sd=ffff830151210000, caf=8000000000000002, taf=7400000000000001
>
>
> Attached:
> - xm dmesg
> - xm info
> - dmesg
> - lspci -vvvknn
>
>
> --
> Sander
> [ 0.000000] Initializing cgroup subsys cpuset
> [ 0.000000] Initializing cgroup subsys cpu
> [ 0.000000] Linux version 2.6.31.13 (root@serveerstertje) (gcc version
> 4.3.2 (Debian 4.3.2-1.1) ) #3 SMP Fri Apr 16 15:40:16 CEST 2010
> [ 0.000000] Command line: root=/dev/mapper/serveerstertje-root ro
> earlyprintk=xen max_loop=255
> xen-pciback.hide=(00:07.0)(01:08.0)(01:08.1)(01:08.2)(09:01.0)(09:01.1)(09:01.2)(05:00.0)
> [ 0.000000] KERNEL supported cpus:
> [ 0.000000] Intel GenuineIntel
> [ 0.000000] AMD AuthenticAMD
> [ 0.000000] Centaur CentaurHauls
> [ 0.000000] xen_release_chunk: looking at area pfn 30000-afee0: 0 pages
> freed
> [ 0.000000] xen_release_chunk: looking at area pfn aff00-b0000: 0 pages
> freed
> [ 0.000000] xen_release_chunk: looking at area pfn c0000-f0000: 0 pages
> freed
> [ 0.000000] xen_release_chunk: looking at area pfn f4000-fec00: 0 pages
> freed
> [ 0.000000] released 0 pages of unused memory
> [ 0.000000] BIOS-provided physical RAM map:
> [ 0.000000] Xen: 0000000000000000 - 000000000009dc00 (usable)
> [ 0.000000] Xen: 000000000009dc00 - 0000000000100000 (reserved)
> [ 0.000000] Xen: 0000000000100000 - 0000000030000000 (usable)
> [ 0.000000] Xen: 00000000afee0000 - 00000000afee3000 (ACPI NVS)
> [ 0.000000] Xen: 00000000afee3000 - 00000000afef0000 (ACPI data)
> [ 0.000000] Xen: 00000000afef0000 - 00000000aff00000 (reserved)
> [ 0.000000] Xen: 00000000b0000000 - 00000000c0000000 (reserved)
> [ 0.000000] Xen: 00000000f0000000 - 00000000f4000000 (reserved)
> [ 0.000000] Xen: 00000000fec00000 - 0000000100000000 (reserved)
> [ 0.000000] console [xenboot0] enabled
> [ 0.000000] DMI 2.5 present.
> [ 0.000000] Phoenix BIOS detected: BIOS may corrupt low RAM, working
> around it.
> [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000
> (usable) ==> (reserved)
> [ 0.000000] last_pfn = 0x30000 max_arch_pfn = 0x400000000
> [ 0.000000] Scanning 0 areas for low memory corruption
> [ 0.000000] modified physical RAM map:
> [ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved)
> [ 0.000000] modified: 0000000000010000 - 000000000009dc00 (usable)
> [ 0.000000] modified: 000000000009dc00 - 0000000000100000 (reserved)
> [ 0.000000] modified: 0000000000100000 - 0000000030000000 (usable)
> [ 0.000000] modified: 00000000afee0000 - 00000000afee3000 (ACPI NVS)
> [ 0.000000] modified: 00000000afee3000 - 00000000afef0000 (ACPI data)
> [ 0.000000] modified: 00000000afef0000 - 00000000aff00000 (reserved)
> [ 0.000000] modified: 00000000b0000000 - 00000000c0000000 (reserved)
> [ 0.000000] modified: 00000000f0000000 - 00000000f4000000 (reserved)
> [ 0.000000] modified: 00000000fec00000 - 0000000100000000 (reserved)
> [ 0.000000] initial memory mapped : 0 - 20000000
> [ 0.000000] init_memory_mapping: 0000000000000000-0000000030000000
> [ 0.000000] 0000000000 - 0030000000 page 4k
> [ 0.000000] kernel direct mapping tables up to 30000000 @ 100000-282000
> [ 0.000000] RAMDISK: 01b40000 - 0210a600
> [ 0.000000] ACPI: RSDP 00000000000f7550 00024 (v02 Nvidia)
> [ 0.000000] ACPI: XSDT 00000000afee3100 0004C (v01 Nvidia ASUSACPI
> 42302E31 AWRD 00000000)
> [ 0.000000] ACPI: FACP 00000000afeed3c0 000F4 (v03 Nvidia ASUSACPI
> 42302E31 AWRD 00000000)
> [ 0.000000] ACPI Warning: Optional field Pm2ControlBlock has zero address
> or length: 0000000000000000/1 20090521 tbfadt-558
> [ 0.000000] ACPI: DSDT 00000000afee3280 0A0D8 (v01 NVIDIA ASUSACPI
> 00001000 MSFT 03000000)
> [ 0.000000] ACPI: FACS 00000000afee0a80 00040
> [ 0.000000] ACPI: SSDT 00000000afeed600 0028A (v01 PTLTD POWERNOW
> 00000001 LTP 00000001)
> [ 0.000000] ACPI: HPET 00000000afeed900 00038 (v01 Nvidia ASUSACPI
> 42302E31 AWRD 00000098)
> [ 0.000000] ACPI: MCFG 00000000afeed980 0003C (v01 Nvidia ASUSACPI
> 42302E31 AWRD 00000000)
> [ 0.000000] ACPI: APIC 00000000afeed500 0008E (v01 Nvidia ASUSACPI
> 42302E31 AWRD 00000000)
> [ 0.000000] ACPI: Local APIC address 0xfee00000
> [ 0.000000] (8 early reservations) ==> bootmem [0000000000 - 0030000000]
> [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==>
> [0000000000 - 0000001000]
> [ 0.000000] #1 [000228c000 - 00022a1000] XEN PAGETABLES ==>
> [000228c000 - 00022a1000]
> [ 0.000000] #2 [0000006000 - 0000008000] TRAMPOLINE ==>
> [0000006000 - 0000008000]
> [ 0.000000] #3 [0001000000 - 0001b1f408] TEXT DATA BSS ==>
> [0001000000 - 0001b1f408]
> [ 0.000000] #4 [0001b40000 - 000210a600] RAMDISK ==>
> [0001b40000 - 000210a600]
> [ 0.000000] #5 [000210b000 - 000228c000] XEN START INFO ==>
> [000210b000 - 000228c000]
> [ 0.000000] #6 [0001b20000 - 0001b20151] BRK ==>
> [0001b20000 - 0001b20151]
> [ 0.000000] #7 [0000100000 - 000026a000] PGTABLE ==>
> [0000100000 - 000026a000]
> [ 0.000000] found SMP MP-table at [ffff8800000f59c0] f59c0
> [ 0.000000] Zone PFN ranges:
> [ 0.000000] DMA 0x00000010 -> 0x00001000
> [ 0.000000] DMA32 0x00001000 -> 0x00100000
> [ 0.000000] Normal 0x00100000 -> 0x00100000
> [ 0.000000] Movable zone start PFN for each node
> [ 0.000000] early_node_map[2] active PFN ranges
> [ 0.000000] 0: 0x00000010 -> 0x0000009d
> [ 0.000000] 0: 0x00000100 -> 0x00030000
> [ 0.000000] On node 0 totalpages: 196493
> [ 0.000000] DMA zone: 56 pages used for memmap
> [ 0.000000] DMA zone: 365 pages reserved
> [ 0.000000] DMA zone: 3560 pages, LIFO batch:0
> [ 0.000000] DMA32 zone: 2632 pages used for memmap
> [ 0.000000] DMA32 zone: 189880 pages, LIFO batch:31
> [ 0.000000] Detected use of extended apic ids on hypertransport bus
> [ 0.000000] ACPI: PM-Timer IO Port: 0x1008
> [ 0.000000] ACPI: Local APIC address 0xfee00000
> [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
> [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
> [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
> [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
> [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
> [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
> [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
> [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
> [ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
> [ 0.000000] IOAPIC[0]: apic_id 4, version 17, address 0xfec00000, GSI 0-23
> [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
> [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
> [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
> [ 0.000000] ACPI: IRQ0 used by override.
> [ 0.000000] ACPI: IRQ2 used by override.
> [ 0.000000] ACPI: IRQ9 used by override.
> [ 0.000000] ACPI: IRQ14 used by override.
> [ 0.000000] Using ACPI (MADT) for SMP configuration information
> [ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfeff0000
> [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
> [ 0.000000] nr_irqs_gsi: 24
> [ 0.000000] PM: Registered nosave memory: 000000000009d000 -
> 000000000009e000
> [ 0.000000] PM: Registered nosave memory: 000000000009e000 -
> 0000000000100000
> [ 0.000000] Allocating PCI resources starting at 30000000 (gap:
> 30000000:7fee0000)
> [ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
> [ 0.000000] PERCPU: Allocated 22 4k pages, static data 88096 bytes
> [ 0.000000] trying to map vcpu_info 0 at ffffc9000000b020, mfn 1f62b8,
> offset 32
> [ 0.000000] cpu 0 using vcpu_info at ffffc9000000b020
> [ 0.000000] trying to map vcpu_info 1 at ffffc90000023020, mfn 1f62ce,
> offset 32
> [ 0.000000] cpu 1 using vcpu_info at ffffc90000023020
> [ 0.000000] Xen: using vcpu_info placement
> [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total
> pages: 193440
> [ 0.000000] Kernel command line: root=/dev/mapper/serveerstertje-root ro
> earlyprintk=xen max_loop=255
> xen-pciback.hide=(00:07.0)(01:08.0)(01:08.1)(01:08.2)(09:01.0)(09:01.1)(09:01.2)(05:00.0)
> [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
> [ 0.000000] Dentry cache hash table entries: 131072 (order: 8, 1048576
> bytes)
> [ 0.000000] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
> [ 0.000000] Initializing CPU#0
> [ 0.000000] PCI-DMA: Using Xen software bounce buffering for IO
> (Xen-SWIOTLB)
> [ 0.000000] xen_swiotlb_fixup: buf=ffff880003122000 size=67108864
> [ 0.000000] xen_swiotlb_fixup: buf=ffff880007182000 size=32768
> [ 0.000000] Placing 64MB Xen software IO TLB between ffff880003122000 -
> ffff880007122000
> [ 0.000000] Xen software IO TLB at phys 0x3122000 - 0x7122000
> [ 0.000000] Memory: 686328k/786432k available (5694k kernel code, 460k
> absent, 98936k reserved, 4012k data, 560k init)
> [ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0,
> CPUs=2, Nodes=1
> [ 0.000000] Hierarchical RCU implementation.
> [ 0.000000] NR_IRQS:4352 nr_irqs:424
> [ 0.000000] xen: registering gsi 0 triggering 1 polarity 0
> [ 0.000000] xen: --> irq=0
> [ 0.000000] xen_set_ioapic_routing: irq 0 gsi 0 vector 0 ioapic 0 pin 0
> triggering 0 polarity 0
> [ 0.000000] xen: registering gsi 1 triggering 1 polarity 0
> [ 0.000000] xen: --> irq=1
> [ 0.000000] xen_set_ioapic_routing: irq 1 gsi 1 vector 1 ioapic 0 pin 1
> triggering 0 polarity 0
> [ 0.000000] xen: registering gsi 3 triggering 1 polarity 0
> [ 0.000000] xen: --> irq=3
> [ 0.000000] xen_set_ioapic_routing: irq 3 gsi 3 vector 3 ioapic 0 pin 3
> triggering 0 polarity 0
> [ 0.000000] xen: registering gsi 4 triggering 1 polarity 0
> [ 0.000000] xen: --> irq=4
> [ 0.000000] xen_set_ioapic_routing: irq 4 gsi 4 vector 4 ioapic 0 pin 4
> triggering 0 polarity 0
> [ 0.000000] xen: registering gsi 5 triggering 1 polarity 0
> [ 0.000000] xen: --> irq=5
> [ 0.000000] xen_set_ioapic_routing: irq 5 gsi 5 vector 5 ioapic 0 pin 5
> triggering 0 polarity 0
> [ 0.000000] xen: registering gsi 6 triggering 1 polarity 0
> [ 0.000000] xen: --> irq=6
> [ 0.000000] xen_set_ioapic_routing: irq 6 gsi 6 vector 6 ioapic 0 pin 6
> triggering 0 polarity 0
> [ 0.000000] xen: registering gsi 7 triggering 1 polarity 0
> [ 0.000000] xen: --> irq=7
> [ 0.000000] xen_set_ioapic_routing: irq 7 gsi 7 vector 7 ioapic 0 pin 7
> triggering 0 polarity 0
> [ 0.000000] xen: registering gsi 8 triggering 1 polarity 0
> [ 0.000000] xen: --> irq=8
> [ 0.000000] xen_set_ioapic_routing: irq 8 gsi 8 vector 8 ioapic 0 pin 8
> triggering 0 polarity 0
> [ 0.000000] xen: registering gsi 9 triggering 0 polarity 0
> [ 0.000000] xen: --> irq=9
> [ 0.000000] xen_set_ioapic_routing: irq 9 gsi 9 vector 9 ioapic 0 pin 9
> triggering 1 polarity 0
> [ 0.000000] xen: registering gsi 10 triggering 1 polarity 0
> [ 0.000000] xen: --> irq=10
> [ 0.000000] xen_set_ioapic_routing: irq 10 gsi 10 vector 10 ioapic 0 pin
> 10 triggering 0 polarity 0
> [ 0.000000] xen: registering gsi 11 triggering 1 polarity 0
> [ 0.000000] xen: --> irq=11
> [ 0.000000] xen_set_ioapic_routing: irq 11 gsi 11 vector 11 ioapic 0 pin
> 11 triggering 0 polarity 0
> [ 0.000000] xen: registering gsi 12 triggering 1 polarity 0
> [ 0.000000] xen: --> irq=12
> [ 0.000000] xen_set_ioapic_routing: irq 12 gsi 12 vector 12 ioapic 0 pin
> 12 triggering 0 polarity 0
> [ 0.000000] xen: registering gsi 13 triggering 1 polarity 0
> [ 0.000000] xen: --> irq=13
> [ 0.000000] xen_set_ioapic_routing: irq 13 gsi 13 vector 13 ioapic 0 pin
> 13 triggering 0 polarity 0
> [ 0.000000] xen: registering gsi 14 triggering 1 polarity 0
> [ 0.000000] xen: --> irq=14
> [ 0.000000] xen_set_ioapic_routing: irq 14 gsi 14 vector 14 ioapic 0 pin
> 14 triggering 0 polarity 0
> [ 0.000000] xen: registering gsi 15 triggering 1 polarity 0
> [ 0.000000] xen: --> irq=15
> [ 0.000000] xen_set_ioapic_routing: irq 15 gsi 15 vector 15 ioapic 0 pin
> 15 triggering 0 polarity 0
> [ 0.000000] Detected 2500.002 MHz processor.
> [ 0.000999] Console: colour VGA+ 80x25
> [ 0.000999] console handover: boot [xenboot0] -> real [tty0]
> [ 0.000999] Xen: using vcpuop timer interface
> [ 0.000999] installing Xen timer for CPU 0
> [ 0.000999] alloc irq_desc for 423 on node 0
> [ 0.000999] alloc kstat_irqs on node 0
> [ 0.000999] xen: vcpu_time_info placement not supported
> [ 0.000999] Calibrating delay loop (skipped), value calculated using timer
> frequency.. 5000.00 BogoMIPS (lpj=2500002)
> [ 0.000999] Security Framework initialized
> [ 0.000999] SELinux: Initializing.
> [ 0.000999] SELinux: Starting in permissive mode
> [ 0.000999] Mount-cache hash table entries: 256
> [ 0.000999] Initializing cgroup subsys ns
> [ 0.000999] Initializing cgroup subsys cpuacct
> [ 0.000999] Initializing cgroup subsys freezer
> [ 0.000999] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64
> bytes/line)
> [ 0.000999] CPU: L2 Cache: 512K (64 bytes/line)
> [ 0.000999] tseg: 00aff00000
> [ 0.000999] CPU: Physical Processor ID: 0
> [ 0.000999] CPU: Processor Core ID: 0
> [ 0.000999] mce: CPU supports 5 MCE banks
> [ 0.000999] Performance Counters: AMD PMU driver.
> [ 0.000999] ------------[ cut here ]------------
> [ 0.000999] WARNING: at
> /usr/src/xen-unstable.hg/linux-2.6-pvops.git/arch/x86/xen/enlighten.c:722
> xen_apic_write+0x15/0x17()
> [ 0.000999] Hardware name: System Product Name
> [ 0.000999] Modules linked in:
> [ 0.000999] Pid: 0, comm: swapper Not tainted 2.6.31.13 #3
> [ 0.000999] Call Trace:
> [ 0.000999] [<ffffffff81020ff9>] ? mce_init_timer+0x8f/0x98
> [ 0.000999] [<ffffffff8100b3a6>] ? xen_apic_write+0x15/0x17
> [ 0.000999] [<ffffffff8104bd20>] warn_slowpath_common+0x77/0xa4
> [ 0.000999] [<ffffffff8104bd5c>] warn_slowpath_null+0xf/0x11
> [ 0.000999] [<ffffffff8100b3a6>] xen_apic_write+0x15/0x17
> [ 0.000999] [<ffffffff8101f4e3>] perf_counters_lapic_init+0x2e/0x30
> [ 0.000999] [<ffffffff8199b02d>] init_hw_perf_counters+0x305/0x3a2
> [ 0.000999] [<ffffffff8100f3ff>] ? xen_restore_fl_direct_end+0x0/0x1
> [ 0.000999] [<ffffffff810da73c>] ? kmem_cache_alloc+0xcb/0x12d
> [ 0.000999] [<ffffffff8199acf9>] identify_boot_cpu+0x3c/0x3e
> [ 0.000999] [<ffffffff8199ad04>] check_bugs+0x9/0x2d
> [ 0.000999] [<ffffffff819925ea>] start_kernel+0x41d/0x432
> [ 0.000999] [<ffffffff81991adf>] x86_64_start_reservations+0xaa/0xae
> [ 0.000999] [<ffffffff81995965>] xen_start_kernel+0x63a/0x641
> [ 0.000999] ---[ end trace 4eaa2a86a8e2da22 ]---
> [ 0.000999] ... version: 0
> [ 0.000999] ... bit width: 48
> [ 0.000999] ... generic counters: 4
> [ 0.000999] ... value mask: 0000ffffffffffff
> [ 0.000999] ... max period: 00007fffffffffff
> [ 0.000999] ... fixed-purpose counters: 0
> [ 0.000999] ... counter mask: 000000000000000f
> [ 0.000999] SMP alternatives: switching to UP code
> [ 0.000999] ACPI: Core revision 20090521
> [ 0.019101] alloc irq_desc for 422 on node 0
> [ 0.019105] alloc kstat_irqs on node 0
> [ 0.019116] alloc irq_desc for 421 on node 0
> [ 0.019119] alloc kstat_irqs on node 0
> [ 0.019126] alloc irq_desc for 420 on node 0
> [ 0.019128] alloc kstat_irqs on node 0
> [ 0.019134] alloc irq_desc for 419 on node 0
> [ 0.019137] alloc kstat_irqs on node 0
> [ 0.019321] installing Xen timer for CPU 1
> [ 0.019525] alloc irq_desc for 418 on node 0
> [ 0.019528] alloc kstat_irqs on node 0
> [ 0.019565] SMP alternatives: switching to SMP code
> [ 0.019996] alloc irq_desc for 417 on node 0
> [ 0.019996] alloc kstat_irqs on node 0
> [ 0.020011] alloc irq_desc for 416 on node 0
> [ 0.020014] alloc kstat_irqs on node 0
> [ 0.020022] alloc irq_desc for 415 on node 0
> [ 0.020025] alloc kstat_irqs on node 0
> [ 0.020031] alloc irq_desc for 414 on node 0
> [ 0.020034] alloc kstat_irqs on node 0
> [ 0.000014] Initializing CPU#1
> [ 0.000069] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64
> bytes/line)
> [ 0.000073] CPU: L2 Cache: 512K (64 bytes/line)
> [ 0.000075] CPU: Physical Processor ID: 0
> [ 0.000077] CPU: Processor Core ID: 1
> [ 0.000081] mce: CPU supports 5 MCE banks
> [ 0.020161] Brought up 2 CPUs
> [ 0.021185] Booting paravirtualized kernel on Xen
> [ 0.021205] Xen version: 4.0.1-rc1-pre (preserve-AD) (dom0)
> [ 0.022036] Grant tables using version 2 layout.
> [ 0.022256] Grant table initialized
> [ 0.022518] Time: 14:45:28 Date: 04/16/10
> [ 0.022784] NET: Registered protocol family 16
> [ 0.023057] alloc irq_desc for 413 on node 0
> [ 0.023060] alloc kstat_irqs on node 0
> [ 0.023130] xenbus_probe_init ok
> [ 0.024060] node 0 link 0: io port [7000, ffff]
> [ 0.024060] TOM: 00000000c0000000 aka 3072M
> [ 0.024221] node 0 link 0: mmio [a0000, bffff]
> [ 0.024228] node 0 link 0: mmio [c0000000, efffffff]
> [ 0.024236] node 0 link 0: mmio [f4000000, fe02ffff]
> [ 0.024241] node 0 link 0: mmio [f0000000, f0afffff]
> [ 0.024247] TOM2: 0000000200000000 aka 8192M
> [ 0.024447] bus: [00,0a] on node 0 link 0
> [ 0.024451] bus: 00 index 0 io port: [0, ffff]
> [ 0.024454] bus: 00 index 1 mmio: [a0000, bffff]
> [ 0.024457] bus: 00 index 2 mmio: [c0000000, f3ffffff]
> [ 0.024461] bus: 00 index 3 mmio: [f4000000, ffffffff]
> [ 0.024464] bus: 00 index 4 mmio: [200000000, fcffffffff]
> [ 0.024483] ACPI: bus type pci registered
> [ 0.024701] PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - 63
> [ 0.024701] PCI: MCFG area at f0000000 reserved in E820
> [ 0.040817] PCI: Using MMCONFIG at f0000000 - f3ffffff
> [ 0.040993] PCI: Using configuration type 1 for base access
> [ 0.057080] bio: create slab <bio-0> at 0
> [ 0.061269] ACPI: EC: Look up EC in DSDT
> [ 0.084836] ACPI: Interpreter enabled
> [ 0.084987] ACPI: (supports S0 S1 S3 S4 S5)
> [ 0.084987] ACPI: Using IOAPIC for interrupt routing
> [ 0.120347] ACPI: No dock devices found.
> [ 0.121016] ACPI: PCI Root Bridge [PCI0] (0000:00)
> [ 0.121434] pci 0000:00:01.1: reg 10 io port: [0xff00-0xff3f]
> [ 0.121463] pci 0000:00:01.1: reg 20 io port: [0x1c00-0x1c3f]
> [ 0.121472] pci 0000:00:01.1: reg 24 io port: [0x1c40-0x1c7f]
> [ 0.121512] pci 0000:00:01.1: PME# supported from D3hot D3cold
> [ 0.121722] pci 0000:00:01.1: PME# disabled
> [ 0.122153] pci 0000:00:01.3: reg 10 32bit mmio: [0xfdf80000-0xfdffffff]
> [ 0.122382] pci 0000:00:02.0: reg 10 32bit mmio: [0xfe02f000-0xfe02ffff]
> [ 0.122445] pci 0000:00:02.0: supports D1 D2
> [ 0.122448] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
> [ 0.122656] pci 0000:00:02.0: PME# disabled
> [ 0.122901] pci 0000:00:04.0: reg 10 32bit mmio: [0xfe02d000-0xfe02dfff]
> [ 0.122964] pci 0000:00:04.0: supports D1 D2
> [ 0.122967] pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold
> [ 0.122981] pci 0000:00:04.0: PME# disabled
> [ 0.123047] pci 0000:00:06.0: reg 20 io port: [0xfc00-0xfc0f]
> [ 0.123131] pci 0000:00:07.0: reg 10 32bit mmio: [0xfe020000-0xfe023fff]
> [ 0.123194] pci 0000:00:07.0: PME# supported from D3hot D3cold
> [ 0.123400] pci 0000:00:07.0: PME# disabled
> [ 0.123754] pci 0000:00:09.0: reg 10 io port: [0x9f0-0x9f7]
> [ 0.123764] pci 0000:00:09.0: reg 14 io port: [0xbf0-0xbf3]
> [ 0.123773] pci 0000:00:09.0: reg 18 io port: [0x970-0x977]
> [ 0.123782] pci 0000:00:09.0: reg 1c io port: [0xb70-0xb73]
> [ 0.123791] pci 0000:00:09.0: reg 20 io port: [0xf700-0xf70f]
> [ 0.123800] pci 0000:00:09.0: reg 24 32bit mmio: [0xfe026000-0xfe027fff]
> [ 0.123914] pci 0000:00:0a.0: reg 10 32bit mmio: [0xfe02b000-0xfe02bfff]
> [ 0.123924] pci 0000:00:0a.0: reg 14 io port: [0xf600-0xf607]
> [ 0.123933] pci 0000:00:0a.0: reg 18 32bit mmio: [0xfe02a000-0xfe02a0ff]
> [ 0.123943] pci 0000:00:0a.0: reg 1c 32bit mmio: [0xfe029000-0xfe02900f]
> [ 0.123981] pci 0000:00:0a.0: supports D1 D2
> [ 0.123981] pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold
> [ 0.123981] pci 0000:00:0a.0: PME# disabled
> [ 0.124073] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
> [ 0.124280] pci 0000:00:0b.0: PME# disabled
> [ 0.124771] pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold
> [ 0.124980] pci 0000:00:10.0: PME# disabled
> [ 0.125256] pci 0000:00:11.0: PME# supported from D0 D1 D2 D3hot D3cold
> [ 0.125468] pci 0000:00:11.0: PME# disabled
> [ 0.125980] pci 0000:00:13.0: PME# supported from D0 D1 D2 D3hot D3cold
> [ 0.125980] pci 0000:00:13.0: PME# disabled
> [ 0.126257] pci 0000:00:14.0: PME# supported from D0 D1 D2 D3hot D3cold
> [ 0.126468] pci 0000:00:14.0: PME# disabled
> [ 0.127066] pci 0000:01:08.0: reg 20 io port: [0xec00-0xec1f]
> [ 0.127110] pci 0000:01:08.0: supports D1 D2
> [ 0.127114] pci 0000:01:08.0: PME# supported from D0 D1 D2 D3hot D3cold
> [ 0.127321] pci 0000:01:08.0: PME# disabled
> [ 0.127600] pci 0000:01:08.1: reg 20 io port: [0xe800-0xe81f]
> [ 0.127644] pci 0000:01:08.1: supports D1 D2
> [ 0.127647] pci 0000:01:08.1: PME# supported from D0 D1 D2 D3hot D3cold
> [ 0.127855] pci 0000:01:08.1: PME# disabled
> [ 0.128027] pci 0000:01:08.2: reg 10 32bit mmio: [0xfdeff000-0xfdeff0ff]
> [ 0.128100] pci 0000:01:08.2: supports D1 D2
> [ 0.128104] pci 0000:01:08.2: PME# supported from D0 D1 D2 D3hot D3cold
> [ 0.128312] pci 0000:01:08.2: PME# disabled
> [ 0.128580] pci 0000:00:08.0: transparent bridge
> [ 0.128785] pci 0000:00:08.0: bridge io port: [0xe000-0xefff]
> [ 0.128791] pci 0000:00:08.0: bridge 32bit mmio: [0xfde00000-0xfdefffff]
> [ 0.128798] pci 0000:00:08.0: bridge 32bit mmio pref:
> [0xfdd00000-0xfddfffff]
> [ 0.128852] pci 0000:02:00.0: reg 10 32bit mmio: [0xfb000000-0xfbffffff]
> [ 0.128867] pci 0000:02:00.0: reg 14 64bit mmio: [0xd8000000-0xdfffffff]
> [ 0.128881] pci 0000:02:00.0: reg 1c 64bit mmio: [0xe6000000-0xe7ffffff]
> [ 0.128891] pci 0000:02:00.0: reg 24 io port: [0xdc00-0xdc7f]
> [ 0.128900] pci 0000:02:00.0: reg 30 32bit mmio: [0x000000-0x01ffff]
> [ 0.128980] pci 0000:00:0b.0: bridge io port: [0xd000-0xdfff]
> [ 0.128986] pci 0000:00:0b.0: bridge 32bit mmio: [0xfb000000-0xfcffffff]
> [ 0.128995] pci 0000:00:0b.0: bridge 64bit mmio pref:
> [0xd8000000-0xe7ffffff]
> [ 0.129059] pci 0000:03:00.0: reg 10 32bit mmio: [0xfdce0000-0xfdcfffff]
> [ 0.129113] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
> [ 0.129320] pci 0000:03:00.0: PME# disabled
> [ 0.129624] pci 0000:00:10.0: bridge io port: [0xa000-0xcfff]
> [ 0.129635] pci 0000:00:10.0: bridge 32bit mmio: [0xfda00000-0xfdcfffff]
> [ 0.129654] pci 0000:00:10.0: bridge 64bit mmio pref:
> [0xfd800000-0xfd9fffff]
> [ 0.129763] pci 0000:04:01.0: PME# supported from D0 D3hot D3cold
> [ 0.129970] pci 0000:04:01.0: PME# disabled
> [ 0.130082] pci 0000:04:02.0: PME# supported from D0 D3hot D3cold
> [ 0.130289] pci 0000:04:02.0: PME# disabled
> [ 0.130569] pci 0000:03:00.0: bridge io port: [0xa000-0xcfff]
> [ 0.130576] pci 0000:03:00.0: bridge 32bit mmio: [0xfda00000-0xfdbfffff]
> [ 0.130587] pci 0000:03:00.0: bridge 64bit mmio pref:
> [0xfd800000-0xfd9fffff]
> [ 0.130673] pci 0000:05:00.0: reg 10 64bit mmio: [0xfdbfe000-0xfdbfffff]
> [ 0.130775] pci 0000:05:00.0: PME# supported from D0 D3hot
> [ 0.130980] pci 0000:05:00.0: PME# disabled
> [ 0.131056] pci 0000:04:01.0: bridge io port: [0xc000-0xcfff]
> [ 0.131063] pci 0000:04:01.0: bridge 32bit mmio: [0xfdb00000-0xfdbfffff]
> [ 0.131074] pci 0000:04:01.0: bridge 64bit mmio pref:
> [0xfd900000-0xfd9fffff]
> [ 0.131139] pci 0000:06:00.0: reg 10 io port: [0xbc00-0xbc07]
> [ 0.131151] pci 0000:06:00.0: reg 14 io port: [0xb800-0xb803]
> [ 0.131162] pci 0000:06:00.0: reg 18 io port: [0xb400-0xb407]
> [ 0.131174] pci 0000:06:00.0: reg 1c io port: [0xb000-0xb003]
> [ 0.131185] pci 0000:06:00.0: reg 20 io port: [0xac00-0xac0f]
> [ 0.131196] pci 0000:06:00.0: reg 24 32bit mmio: [0xfdaff000-0xfdaff7ff]
> [ 0.131208] pci 0000:06:00.0: reg 30 32bit mmio: [0xfdae0000-0xfdaeffff]
> [ 0.131254] pci 0000:06:00.0: PME# supported from D3hot
> [ 0.131459] pci 0000:06:00.0: PME# disabled
> [ 0.131744] pci 0000:04:02.0: bridge io port: [0xa000-0xbfff]
> [ 0.131751] pci 0000:04:02.0: bridge 32bit mmio: [0xfda00000-0xfdafffff]
> [ 0.131761] pci 0000:04:02.0: bridge 64bit mmio pref:
> [0xfd800000-0xfd8fffff]
> [ 0.131892] pci 0000:00:11.0: bridge io port: [0x9000-0x9fff]
> [ 0.131903] pci 0000:00:11.0: bridge 32bit mmio: [0xfd700000-0xfd7fffff]
> [ 0.131922] pci 0000:00:11.0: bridge 64bit mmio pref:
> [0xfd600000-0xfd6fffff]
> [ 0.131979] pci 0000:08:00.0: supports D1 D2
> [ 0.132067] pci 0000:00:13.0: bridge io port: [0x8000-0x8fff]
> [ 0.132078] pci 0000:00:13.0: bridge 32bit mmio: [0xfd500000-0xfd5fffff]
> [ 0.132097] pci 0000:00:13.0: bridge 64bit mmio pref:
> [0xfd400000-0xfd4fffff]
> [ 0.132169] pci 0000:09:01.0: reg 10 32bit mmio: [0xfd5ff000-0xfd5fffff]
> [ 0.132268] pci 0000:09:01.0: supports D1 D2
> [ 0.132271] pci 0000:09:01.0: PME# supported from D0 D1 D2 D3hot
> [ 0.132481] pci 0000:09:01.0: PME# disabled
> [ 0.132747] pci 0000:09:01.1: reg 10 32bit mmio: [0xfd5fe000-0xfd5fefff]
> [ 0.132846] pci 0000:09:01.1: supports D1 D2
> [ 0.132849] pci 0000:09:01.1: PME# supported from D0 D1 D2 D3hot
> [ 0.132979] pci 0000:09:01.1: PME# disabled
> [ 0.133041] pci 0000:09:01.2: reg 10 32bit mmio: [0xfd5fd000-0xfd5fd0ff]
> [ 0.133140] pci 0000:09:01.2: supports D1 D2
> [ 0.133143] pci 0000:09:01.2: PME# supported from D0 D1 D2 D3hot
> [ 0.133352] pci 0000:09:01.2: PME# disabled
> [ 0.133670] pci 0000:08:00.0: bridge io port: [0x8000-0x8fff]
> [ 0.133678] pci 0000:08:00.0: bridge 32bit mmio: [0xfd500000-0xfd5fffff]
> [ 0.133690] pci 0000:08:00.0: bridge 64bit mmio pref:
> [0xfd400000-0xfd4fffff]
> [ 0.133795] pci 0000:0a:00.0: reg 10 32bit mmio: [0xfd3e0000-0xfd3fffff]
> [ 0.133810] pci 0000:0a:00.0: reg 14 32bit mmio: [0xfd3c0000-0xfd3dffff]
> [ 0.133825] pci 0000:0a:00.0: reg 18 io port: [0x7c00-0x7c1f]
> [ 0.133873] pci 0000:0a:00.0: reg 30 32bit mmio: [0xfd3a0000-0xfd3bffff]
> [ 0.133936] pci 0000:0a:00.0: PME# supported from D0 D3hot D3cold
> [ 0.133979] pci 0000:0a:00.0: PME# disabled
> [ 0.134067] pci 0000:00:14.0: bridge io port: [0x7000-0x7fff]
> [ 0.134078] pci 0000:00:14.0: bridge 32bit mmio: [0xfd300000-0xfd3fffff]
> [ 0.134097] pci 0000:00:14.0: bridge 64bit mmio pref:
> [0xfd200000-0xfd2fffff]
> [ 0.134175] pci_bus 0000:00: on NUMA node 0
> [ 0.134184] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
> [ 0.134891] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
> [ 0.309032] ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 9 10 11 14 15) *0,
> disabled.
> [ 0.309952] ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 9 10 11 14 15) *0,
> disabled.
> [ 0.309952] ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 9 10 11 14 15) *0,
> disabled.
> [ 0.309952] ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 9 10 11 14 15) *0,
> disabled.
> [ 0.309952] ACPI: PCI Interrupt Link [LE0A] (IRQs *5 7 9 10 11 14 15)
> [ 0.309952] ACPI: PCI Interrupt Link [LE0B] (IRQs 5 7 9 *10 11 14 15)
> [ 0.310133] ACPI: PCI Interrupt Link [LE0C] (IRQs 5 7 9 10 *11 14 15)
> [ 0.310847] ACPI: PCI Interrupt Link [LE0D] (IRQs 5 7 9 10 11 14 15) *0,
> disabled.
> [ 0.310952] ACPI: PCI Interrupt Link [LE1A] (IRQs 5 7 9 10 11 14 15) *0,
> disabled.
> [ 0.310952] ACPI: PCI Interrupt Link [LE1B] (IRQs 5 7 9 10 11 14 15) *0,
> disabled.
> [ 0.310952] ACPI: PCI Interrupt Link [LE1C] (IRQs 5 7 9 10 11 14 15) *0,
> disabled.
> [ 0.310952] ACPI: PCI Interrupt Link [LE1D] (IRQs 5 7 9 10 11 14 15) *0,
> disabled.
> [ 0.310952] ACPI: PCI Interrupt Link [LE2A] (IRQs *5 7 9 10 11 14 15)
> [ 0.310952] ACPI: PCI Interrupt Link [LE2B] (IRQs 5 7 9 10 *11 14 15)
> [ 0.311101] ACPI: PCI Interrupt Link [LE2C] (IRQs 5 7 9 10 11 14 15) *0,
> disabled.
> [ 0.311996] ACPI: PCI Interrupt Link [LE2D] (IRQs 5 *7 9 10 11 14 15)
> [ 0.312711] ACPI: PCI Interrupt Link [LE3A] (IRQs 5 7 9 10 11 14 15) *0,
> disabled.
> [ 0.312952] ACPI: PCI Interrupt Link [LE3B] (IRQs 5 7 9 10 11 14 15) *0,
> disabled.
> [ 0.312952] ACPI: PCI Interrupt Link [LE3C] (IRQs 5 7 9 10 11 14 15) *0,
> disabled.
> [ 0.312952] ACPI: PCI Interrupt Link [LE3D] (IRQs 5 7 9 10 11 14 15) *0,
> disabled.
> [ 0.312952] ACPI: PCI Interrupt Link [LE4A] (IRQs *5 7 9 10 11 14 15)
> [ 0.313183] ACPI: PCI Interrupt Link [LE4B] (IRQs 5 7 9 10 11 14 15) *0,
> disabled.
> [ 0.314074] ACPI: PCI Interrupt Link [LE4C] (IRQs 5 7 9 10 11 14 15) *0,
> disabled.
> [ 0.314966] ACPI: PCI Interrupt Link [LE4D] (IRQs 5 7 9 10 11 14 15) *0,
> disabled.
> [ 0.315902] ACPI: PCI Interrupt Link [LE5A] (IRQs 5 7 9 10 11 14 15) *0,
> disabled.
> [ 0.315951] ACPI: PCI Interrupt Link [LE5B] (IRQs 5 7 9 10 11 14 15) *0,
> disabled.
> [ 0.315951] ACPI: PCI Interrupt Link [LE5C] (IRQs 5 7 9 10 11 14 15) *0,
> disabled.
> [ 0.315951] ACPI: PCI Interrupt Link [LE5D] (IRQs 5 7 9 10 11 14 15) *0,
> disabled.
> [ 0.315951] ACPI: PCI Interrupt Link [LE6A] (IRQs 5 7 9 10 11 14 15) *0,
> disabled.
> [ 0.315951] ACPI: PCI Interrupt Link [LE6B] (IRQs 5 7 9 10 11 14 15) *0,
> disabled.
> [ 0.315951] ACPI: PCI Interrupt Link [LE6C] (IRQs 5 7 9 10 11 14 15) *0,
> disabled.
> [ 0.315951] ACPI: PCI Interrupt Link [LE6D] (IRQs 5 7 9 10 11 14 15) *0,
> disabled.
> [ 0.316059] ACPI: PCI Interrupt Link [LE7A] (IRQs 5 7 9 10 11 14 15) *0,
> disabled.
> [ 0.316951] ACPI: PCI Interrupt Link [LE7B] (IRQs 5 7 9 10 11 14 15) *0,
> disabled.
> [ 0.316951] ACPI: PCI Interrupt Link [LE7C] (IRQs 5 7 9 10 11 14 15) *0,
> disabled.
> [ 0.316951] ACPI: PCI Interrupt Link [LE7D] (IRQs 5 7 9 10 11 14 15) *0,
> disabled.
> [ 0.316951] ACPI: PCI Interrupt Link [LP2P] (IRQs 5 7 9 10 11 14 15) *0,
> disabled.
> [ 0.316951] ACPI: PCI Interrupt Link [LIGP] (IRQs 5 7 9 10 *11 14 15)
> [ 0.317183] ACPI: PCI Interrupt Link [LUBA] (IRQs 5 7 9 10 11 14 15) *0,
> disabled.
> [ 0.318145] ACPI: PCI Interrupt Link [LUB2] (IRQs 5 7 9 10 11 14 15) *0,
> disabled.
> [ 0.319036] ACPI: PCI Interrupt Link [LU1B] (IRQs 5 7 9 10 11 14 15) *0,
> disabled.
> [ 0.319951] ACPI: PCI Interrupt Link [LU2B] (IRQs 5 7 9 10 11 14 15) *0,
> disabled.
> [ 0.319951] ACPI: PCI Interrupt Link [LMAC] (IRQs 5 7 9 10 11 14 *15)
> [ 0.319951] ACPI: PCI Interrupt Link [LAZA] (IRQs 5 7 9 *10 11 14 15)
> [ 0.319951] ACPI: PCI Interrupt Link [LPMU] (IRQs 5 *7 9 10 11 14 15)
> [ 0.320179] ACPI: PCI Interrupt Link [LSMB] (IRQs 5 7 9 10 11 14 15) *0,
> disabled.
> [ 0.321070] ACPI: PCI Interrupt Link [LIDE] (IRQs 5 7 9 10 11 14 15) *0,
> disabled.
> [ 0.321951] ACPI: PCI Interrupt Link [LSID] (IRQs 5 7 9 *10 11 14 15)
> [ 0.322261] ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled.
> [ 0.322928] ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled.
> [ 0.322951] ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0, disabled.
> [ 0.322951] ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled.
> [ 0.322951] ACPI: PCI Interrupt Link [AE0A] (IRQs 16) *0
> [ 0.322951] ACPI: PCI Interrupt Link [AE0B] (IRQs 16) *0
> [ 0.322951] ACPI: PCI Interrupt Link [AE0C] (IRQs 16) *0
> [ 0.322951] ACPI: PCI Interrupt Link [AE0D] (IRQs 16) *0, disabled.
> [ 0.322951] ACPI: PCI Interrupt Link [AE1A] (IRQs 16) *0, disabled.
> [ 0.323124] ACPI: PCI Interrupt Link [AE1B] (IRQs 16) *0, disabled.
> [ 0.323790] ACPI: PCI Interrupt Link [AE1C] (IRQs 16) *0, disabled.
> [ 0.323951] ACPI: PCI Interrupt Link [AE1D] (IRQs 16) *0, disabled.
> [ 0.323951] ACPI: PCI Interrupt Link [AE2A] (IRQs 16) *0
> [ 0.323951] ACPI: PCI Interrupt Link [AE2B] (IRQs 16) *0
> [ 0.323951] ACPI: PCI Interrupt Link [AE2C] (IRQs 16) *0, disabled.
> [ 0.324132] ACPI: PCI Interrupt Link [AE2D] (IRQs 16) *0
> [ 0.324766] ACPI: PCI Interrupt Link [AE3A] (IRQs 16) *0, disabled.
> [ 0.324951] ACPI: PCI Interrupt Link [AE3B] (IRQs 16) *0, disabled.
> [ 0.325186] ACPI: PCI Interrupt Link [AE3C] (IRQs 16) *0, disabled.
> [ 0.325854] ACPI: PCI Interrupt Link [AE3D] (IRQs 16) *0, disabled.
> [ 0.325951] ACPI: PCI Interrupt Link [AE4A] (IRQs 16) *0
> [ 0.326226] ACPI: PCI Interrupt Link [AE4B] (IRQs 16) *0, disabled.
> [ 0.326891] ACPI: PCI Interrupt Link [AE4C] (IRQs 16) *0, disabled.
> [ 0.326951] ACPI: PCI Interrupt Link [AE4D] (IRQs 16) *0, disabled.
> [ 0.326951] ACPI: PCI Interrupt Link [AE5A] (IRQs 16) *0, disabled.
> [ 0.326951] ACPI: PCI Interrupt Link [AE5B] (IRQs 16) *0, disabled.
> [ 0.326951] ACPI: PCI Interrupt Link [AE5C] (IRQs 16) *0, disabled.
> [ 0.326951] ACPI: PCI Interrupt Link [AE5D] (IRQs 16) *0, disabled.
> [ 0.326951] ACPI: PCI Interrupt Link [AE6A] (IRQs 16) *0, disabled.
> [ 0.326951] ACPI: PCI Interrupt Link [AE6B] (IRQs 16) *0, disabled.
> [ 0.326951] ACPI: PCI Interrupt Link [AE6C] (IRQs 16) *0, disabled.
> [ 0.326951] ACPI: PCI Interrupt Link [AE6D] (IRQs 16) *0, disabled.
> [ 0.326951] ACPI: PCI Interrupt Link [AE7A] (IRQs 16) *0, disabled.
> [ 0.326951] ACPI: PCI Interrupt Link [AE7B] (IRQs 16) *0, disabled.
> [ 0.326951] ACPI: PCI Interrupt Link [AE7C] (IRQs 16) *0, disabled.
> [ 0.327148] ACPI: PCI Interrupt Link [AE7D] (IRQs 16) *0, disabled.
> [ 0.327814] ACPI: PCI Interrupt Link [AIGP] (IRQs 20 21 22 23) *0
> [ 0.328185] ACPI: PCI Interrupt Link [AUBA] (IRQs 20 21 22 23) *0,
> disabled.
> [ 0.328943] ACPI: PCI Interrupt Link [AUB2] (IRQs 20 21 22 23) *0,
> disabled.
> [ 0.329115] ACPI: PCI Interrupt Link [AU1B] (IRQs 20 21 22 23) *0,
> disabled.
> [ 0.329873] ACPI: PCI Interrupt Link [AU2B] (IRQs 20 21 22 23) *0,
> disabled.
> [ 0.329951] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0
> [ 0.329951] ACPI: PCI Interrupt Link [APMU] (IRQs 20 21 22 23) *0
> [ 0.329951] ACPI: PCI Interrupt Link [AAZA] (IRQs 20 21 22 23) *0
> [ 0.329951] ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0,
> disabled.
> [ 0.329951] ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22 23) *0,
> disabled.
> [ 0.329951] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0,
> disabled.
> [ 0.329951] ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0
> [ 0.329998] sync cpu 0 get result 1 max_id 1
> [ 0.329998] sync cpu 1 get result 1 max_id 1
> [ 0.329998] alloc irq_desc for 412 on node 0
> [ 0.329998] alloc kstat_irqs on node 0
> [ 0.330008] xenbus_probe_backend_init bus registered ok
> [ 0.330184] xenbus_probe_frontend_init bus registered ok
> [ 0.330184] xen_balloon: Initialising balloon driver with page order 0.
> [ 0.331085] SCSI subsystem initialized
> [ 0.331199] libata version 3.00 loaded.
> [ 0.332039] usbcore: registered new interface driver usbfs
> [ 0.332223] usbcore: registered new interface driver hub
> [ 0.332223] usbcore: registered new device driver usb
> [ 0.333000] PCI: Using ACPI for IRQ routing
> [ 0.333405] IO APIC resources couldn't be allocated.
> [ 0.337966] NetLabel: Initializing
> [ 0.338165] NetLabel: domain hash size = 128
> [ 0.338365] NetLabel: protocols = UNLABELED CIPSOv4
> [ 0.338583] NetLabel: unlabeled traffic allowed by default
> [ 0.339961] Switched to high resolution mode on CPU 0
> [ 0.340427] Switched to high resolution mode on CPU 1
> [ 0.344024] pnp: PnP ACPI init
> [ 0.344246] ACPI: bus type pnp registered
> [ 0.346196] xen: registering gsi 8 triggering 1 polarity 0
> [ 0.346200] xen_allocate_pirq: returning irq 8 for gsi 8
> [ 0.346403] xen: --> irq=8
> [ 0.346406] xen_set_ioapic_routing: irq 8 gsi 8 vector 8 ioapic 0 pin 8
> triggering 0 polarity 0
> [ 0.347196] xen: registering gsi 13 triggering 1 polarity 0
> [ 0.347199] xen_allocate_pirq: returning irq 13 for gsi 13
> [ 0.347401] xen: --> irq=13
> [ 0.347404] xen_set_ioapic_routing: irq 13 gsi 13 vector 13 ioapic 0 pin
> 13 triggering 0 polarity 0
> [ 0.348444] xen: registering gsi 6 triggering 1 polarity 0
> [ 0.348448] xen_allocate_pirq: returning irq 6 for gsi 6
> [ 0.348648] xen: --> irq=6
> [ 0.348652] xen_set_ioapic_routing: irq 6 gsi 6 vector 6 ioapic 0 pin 6
> triggering 0 polarity 0
> [ 0.349808] xen: registering gsi 4 triggering 1 polarity 0
> [ 0.349812] xen_allocate_pirq: returning irq 4 for gsi 4
> [ 0.350014] xen: --> irq=4
> [ 0.350017] xen_set_ioapic_routing: irq 4 gsi 4 vector 4 ioapic 0 pin 4
> triggering 0 polarity 0
> [ 0.358948] pnp: PnP ACPI: found 12 devices
> [ 0.359160] ACPI: ACPI bus type pnp unregistered
> [ 0.359372] system 00:01: ioport range 0x1000-0x107f has been reserved
> [ 0.359575] system 00:01: ioport range 0x1080-0x10ff has been reserved
> [ 0.359779] system 00:01: ioport range 0x1400-0x147f has been reserved
> [ 0.359982] system 00:01: ioport range 0x1480-0x14ff has been reserved
> [ 0.360153] system 00:01: ioport range 0x1800-0x187f has been reserved
> [ 0.360153] system 00:01: ioport range 0x1880-0x18ff has been reserved
> [ 0.360153] system 00:01: iomem range 0xfefe1000-0xfefe10ff has been
> reserved
> [ 0.360153] system 00:01: iomem range 0xb0000000-0xbfffffff has been
> reserved
> [ 0.360153] system 00:02: ioport range 0x4d0-0x4d1 has been reserved
> [ 0.360153] system 00:02: ioport range 0x800-0x87f has been reserved
> [ 0.360153] system 00:02: ioport range 0x290-0x297 has been reserved
> [ 0.361637] system 00:0a: iomem range 0xf0000000-0xf3ffffff has been
> reserved
> [ 0.361847] system 00:0b: iomem range 0xd3a00-0xd3fff could not be reserved
> [ 0.362051] system 00:0b: iomem range 0xf0000-0xf7fff could not be reserved
> [ 0.362255] system 00:0b: iomem range 0xf8000-0xfbfff could not be reserved
> [ 0.362459] system 00:0b: iomem range 0xfc000-0xfffff could not be reserved
> [ 0.362618] system 00:0b: iomem range 0xfeff0000-0xfeff00ff has been
> reserved
> [ 0.362618] system 00:0b: iomem range 0xafee0000-0xafefffff could not be
> reserved
> [ 0.362618] system 00:0b: iomem range 0xffff0000-0xffffffff has been
> reserved
> [ 0.362618] system 00:0b: iomem range 0x0-0x9ffff could not be reserved
> [ 0.362618] system 00:0b: iomem range 0x100000-0xafedffff could not be
> reserved
> [ 0.362618] system 00:0b: iomem range 0xafff0000-0xbffeffff could not be
> reserved
> [ 0.362618] system 00:0b: iomem range 0xfec00000-0xfec00fff has been
> reserved
> [ 0.362618] system 00:0b: iomem range 0xfee00000-0xfeefffff has been
> reserved
> [ 0.362618] system 00:0b: iomem range 0xfefff000-0xfeffffff has been
> reserved
> [ 0.362618] system 00:0b: iomem range 0xfff80000-0xfff80fff has been
> reserved
> [ 0.362618] system 00:0b: iomem range 0xfff90000-0xfffbffff has been
> reserved
> [ 0.362618] system 00:0b: iomem range 0xfffed000-0xfffeffff has been
> reserved
> [ 0.365669] pciback: wants to seize 0000:00:07.0
> [ 0.365674] pciback: wants to seize 0000:01:08.0
> [ 0.365678] pciback: wants to seize 0000:01:08.1
> [ 0.365681] pciback: wants to seize 0000:01:08.2
> [ 0.365685] pciback: wants to seize 0000:09:01.0
> [ 0.365689] pciback: wants to seize 0000:09:01.1
> [ 0.365693] pciback: wants to seize 0000:09:01.2
> [ 0.365696] pciback: wants to seize 0000:05:00.0
> [ 0.365708] pciback 0000:00:00.0: probing...
> [ 0.365721] pciback 0000:00:01.0: probing...
> [ 0.365731] pciback 0000:00:01.1: probing...
> [ 0.365741] pciback 0000:00:01.2: probing...
> [ 0.365750] pciback 0000:00:01.3: probing...
> [ 0.365760] pciback 0000:00:01.4: probing...
> [ 0.365770] pciback 0000:00:02.0: probing...
> [ 0.365780] pciback 0000:00:04.0: probing...
> [ 0.365789] pciback 0000:00:06.0: probing...
> [ 0.365799] pciback 0000:00:07.0: probing...
> [ 0.365802] pciback 0000:00:07.0: seizing device
> [ 0.366003] pciback 0000:00:07.0: pcistub_device_alloc
> [ 0.366006] pciback 0000:00:07.0: deferring initialization
> [ 0.366024] pciback 0000:00:08.0: probing...
> [ 0.366035] pciback 0000:00:09.0: probing...
> [ 0.366045] pciback 0000:00:0a.0: probing...
> [ 0.366054] pciback 0000:00:0b.0: probing...
> [ 0.366064] pciback 0000:00:10.0: probing...
> [ 0.366074] pciback 0000:00:11.0: probing...
> [ 0.366084] pciback 0000:00:13.0: probing...
> [ 0.366094] pciback 0000:00:14.0: probing...
> [ 0.366104] pciback 0000:00:18.0: probing...
> [ 0.366114] pciback 0000:00:18.1: probing...
> [ 0.366124] pciback 0000:00:18.2: probing...
> [ 0.366134] pciback 0000:00:18.3: probing...
> [ 0.366143] pciback 0000:01:08.0: probing...
> [ 0.366147] pciback 0000:01:08.0: seizing device
> [ 0.366347] pciback 0000:01:08.0: pcistub_device_alloc
> [ 0.366350] pciback 0000:01:08.0: deferring initialization
> [ 0.366358] pciback 0000:01:08.1: probing...
> [ 0.366361] pciback 0000:01:08.1: seizing device
> [ 0.366561] pciback 0000:01:08.1: pcistub_device_alloc
> [ 0.366564] pciback 0000:01:08.1: deferring initialization
> [ 0.366572] pciback 0000:01:08.2: probing...
> [ 0.366575] pciback 0000:01:08.2: seizing device
> [ 0.366775] pciback 0000:01:08.2: pcistub_device_alloc
> [ 0.366778] pciback 0000:01:08.2: deferring initialization
> [ 0.366786] pciback 0000:02:00.0: probing...
> [ 0.366797] pciback 0000:03:00.0: probing...
> [ 0.366807] pciback 0000:04:01.0: probing...
> [ 0.366818] pciback 0000:04:02.0: probing...
> [ 0.366828] pciback 0000:05:00.0: probing...
> [ 0.366831] pciback 0000:05:00.0: seizing device
> [ 0.367012] pciback 0000:05:00.0: pcistub_device_alloc
> [ 0.367012] pciback 0000:05:00.0: deferring initialization
> [ 0.367050] pciback 0000:06:00.0: probing...
> [ 0.367061] pciback 0000:08:00.0: probing...
> [ 0.367071] pciback 0000:09:01.0: probing...
> [ 0.367074] pciback 0000:09:01.0: seizing device
> [ 0.367273] pciback 0000:09:01.0: pcistub_device_alloc
> [ 0.367277] pciback 0000:09:01.0: deferring initialization
> [ 0.367285] pciback 0000:09:01.1: probing...
> [ 0.367288] pciback 0000:09:01.1: seizing device
> [ 0.367487] pciback 0000:09:01.1: pcistub_device_alloc
> [ 0.367491] pciback 0000:09:01.1: deferring initialization
> [ 0.367499] pciback 0000:09:01.2: probing...
> [ 0.367502] pciback 0000:09:01.2: seizing device
> [ 0.367702] pciback 0000:09:01.2: pcistub_device_alloc
> [ 0.367705] pciback 0000:09:01.2: deferring initialization
> [ 0.367713] pciback 0000:0a:00.0: probing...
> [ 0.371882] PM-Timer failed consistency check (0x0xffffff) - aborting.
> [ 0.372002] pci 0000:00:08.0: PCI bridge, secondary bus 0000:01
> [ 0.372002] pci 0000:00:08.0: IO window: 0xe000-0xefff
> [ 0.372002] pci 0000:00:08.0: MEM window: 0xfde00000-0xfdefffff
> [ 0.372002] pci 0000:00:08.0: PREFETCH window: 0xfdd00000-0xfddfffff
> [ 0.372002] pci 0000:00:0b.0: PCI bridge, secondary bus 0000:02
> [ 0.372002] pci 0000:00:0b.0: IO window: 0xd000-0xdfff
> [ 0.372002] pci 0000:00:0b.0: MEM window: 0xfb000000-0xfcffffff
> [ 0.372002] pci 0000:00:0b.0: PREFETCH window:
> 0x000000d8000000-0x000000e7ffffff
> [ 0.372002] pci 0000:04:01.0: PCI bridge, secondary bus 0000:05
> [ 0.372002] pci 0000:04:01.0: IO window: 0xc000-0xcfff
> [ 0.372002] pci 0000:04:01.0: MEM window: 0xfdb00000-0xfdbfffff
> [ 0.372002] pci 0000:04:01.0: PREFETCH window:
> 0x000000fd900000-0x000000fd9fffff
> [ 0.372002] pci 0000:04:02.0: PCI bridge, secondary bus 0000:06
> [ 0.372002] pci 0000:04:02.0: IO window: 0xa000-0xbfff
> [ 0.372002] pci 0000:04:02.0: MEM window: 0xfda00000-0xfdafffff
> [ 0.372002] pci 0000:04:02.0: PREFETCH window:
> 0x000000fd800000-0x000000fd8fffff
> [ 0.372002] pci 0000:03:00.0: PCI bridge, secondary bus 0000:04
> [ 0.372002] pci 0000:03:00.0: IO window: 0xa000-0xcfff
> [ 0.372002] pci 0000:03:00.0: MEM window: 0xfda00000-0xfdbfffff
> [ 0.372002] pci 0000:03:00.0: PREFETCH window:
> 0x000000fd800000-0x000000fd9fffff
> [ 0.372002] pci 0000:00:10.0: PCI bridge, secondary bus 0000:03
> [ 0.372002] pci 0000:00:10.0: IO window: 0xa000-0xcfff
> [ 0.372002] pci 0000:00:10.0: MEM window: 0xfda00000-0xfdcfffff
> [ 0.372002] pci 0000:00:10.0: PREFETCH window:
> 0x000000fd800000-0x000000fd9fffff
> [ 0.372002] pci 0000:00:11.0: PCI bridge, secondary bus 0000:07
> [ 0.372002] pci 0000:00:11.0: IO window: 0x9000-0x9fff
> [ 0.372002] pci 0000:00:11.0: MEM window: 0xfd700000-0xfd7fffff
> [ 0.372002] pci 0000:00:11.0: PREFETCH window:
> 0x000000fd600000-0x000000fd6fffff
> [ 0.372002] pci 0000:08:00.0: PCI bridge, secondary bus 0000:09
> [ 0.372002] pci 0000:08:00.0: IO window: 0x8000-0x8fff
> [ 0.372002] pci 0000:08:00.0: MEM window: 0xfd500000-0xfd5fffff
> [ 0.372002] pci 0000:08:00.0: PREFETCH window:
> 0x000000fd400000-0x000000fd4fffff
> [ 0.372002] pci 0000:00:13.0: PCI bridge, secondary bus 0000:08
> [ 0.372002] pci 0000:00:13.0: IO window: 0x8000-0x8fff
> [ 0.372002] pci 0000:00:13.0: MEM window: 0xfd500000-0xfd5fffff
> [ 0.372002] pci 0000:00:13.0: PREFETCH window:
> 0x000000fd400000-0x000000fd4fffff
> [ 0.372002] pci 0000:00:14.0: PCI bridge, secondary bus 0000:0a
> [ 0.372002] pci 0000:00:14.0: IO window: 0x7000-0x7fff
> [ 0.372002] pci 0000:00:14.0: MEM window: 0xfd300000-0xfd3fffff
> [ 0.372002] pci 0000:00:14.0: PREFETCH window:
> 0x000000fd200000-0x000000fd2fffff
> [ 0.372002] pci 0000:00:08.0: setting latency timer to 64
> [ 0.372002] pci 0000:00:0b.0: setting latency timer to 64
> [ 0.372002] ACPI: PCI Interrupt Link [AE0A] enabled at IRQ 16
> [ 0.372002] xen: registering gsi 16 triggering 0 polarity 1
> [ 0.372002] alloc irq_desc for 16 on node 0
> [ 0.372002] alloc kstat_irqs on node 0
> [ 0.382712] xen: --> irq=16
> [ 0.382715] xen_set_ioapic_routing: irq 16 gsi 16 vector 16 ioapic 0 pin
> 16 triggering 1 polarity 1
> [ 0.383093] pci 0000:00:10.0: PCI INT A -> Link[AE0A] -> GSI 16 (level,
> low) -> IRQ 16
> [ 0.383467] pci 0000:00:10.0: setting latency timer to 64
> [ 0.383481] xen: registering gsi 16 triggering 0 polarity 1
> [ 0.383484] xen_allocate_pirq: returning irq 16 for gsi 16
> [ 0.383684] xen: --> irq=16
> [ 0.383687] xen_set_ioapic_routing: irq 16 gsi 16 vector 16 ioapic 0 pin
> 16 triggering 1 polarity 1
> [ 0.383705] pci 0000:03:00.0: PCI INT A -> Link[AE0A] -> GSI 16 (level,
> low) -> IRQ 16
> [ 0.383705] pci 0000:03:00.0: setting latency timer to 64
> [ 0.383705] ACPI: PCI Interrupt Link [AE0B] enabled at IRQ 16
> [ 0.383705] xen: registering gsi 16 triggering 0 polarity 1
> [ 0.383705] xen_allocate_pirq: returning irq 16 for gsi 16
> [ 0.383705] xen: --> irq=16
> [ 0.383705] xen_set_ioapic_routing: irq 16 gsi 16 vector 16 ioapic 0 pin
> 16 triggering 1 polarity 1
> [ 0.383705] pci 0000:04:01.0: PCI INT A -> Link[AE0B] -> GSI 16 (level,
> low) -> IRQ 16
> [ 0.383705] pci 0000:04:01.0: setting latency timer to 64
> [ 0.383705] ACPI: PCI Interrupt Link [AE0C] enabled at IRQ 16
> [ 0.383705] xen: registering gsi 16 triggering 0 polarity 1
> [ 0.383705] xen_allocate_pirq: returning irq 16 for gsi 16
> [ 0.383705] xen: --> irq=16
> [ 0.383705] xen_set_ioapic_routing: irq 16 gsi 16 vector 16 ioapic 0 pin
> 16 triggering 1 polarity 1
> [ 0.383705] pci 0000:04:02.0: PCI INT A -> Link[AE0C] -> GSI 16 (level,
> low) -> IRQ 16
> [ 0.383705] pci 0000:04:02.0: setting latency timer to 64
> [ 0.383705] ACPI: PCI Interrupt Link [AE1A] enabled at IRQ 16
> [ 0.383705] xen: registering gsi 16 triggering 0 polarity 1
> [ 0.383705] xen_allocate_pirq: returning irq 16 for gsi 16
> [ 0.383705] xen: --> irq=16
> [ 0.383705] xen_set_ioapic_routing: irq 16 gsi 16 vector 16 ioapic 0 pin
> 16 triggering 1 polarity 1
> [ 0.383705] pci 0000:00:11.0: PCI INT A -> Link[AE1A] -> GSI 16 (level,
> low) -> IRQ 16
> [ 0.383705] pci 0000:00:11.0: setting latency timer to 64
> [ 0.383705] ACPI: PCI Interrupt Link [AE3A] enabled at IRQ 16
> [ 0.383705] xen: registering gsi 16 triggering 0 polarity 1
> [ 0.383705] xen_allocate_pirq: returning irq 16 for gsi 16
> [ 0.383705] xen: --> irq=16
> [ 0.383705] xen_set_ioapic_routing: irq 16 gsi 16 vector 16 ioapic 0 pin
> 16 triggering 1 polarity 1
> [ 0.383705] pci 0000:00:13.0: PCI INT A -> Link[AE3A] -> GSI 16 (level,
> low) -> IRQ 16
> [ 0.383705] pci 0000:00:13.0: setting latency timer to 64
> [ 0.383705] pci 0000:08:00.0: setting latency timer to 64
> [ 0.383705] ACPI: PCI Interrupt Link [AE4A] enabled at IRQ 16
> [ 0.383705] xen: registering gsi 16 triggering 0 polarity 1
> [ 0.383705] xen_allocate_pirq: returning irq 16 for gsi 16
> [ 0.383705] xen: --> irq=16
> [ 0.383705] xen_set_ioapic_routing: irq 16 gsi 16 vector 16 ioapic 0 pin
> 16 triggering 1 polarity 1
> [ 0.383705] pci 0000:00:14.0: PCI INT A -> Link[AE4A] -> GSI 16 (level,
> low) -> IRQ 16
> [ 0.383705] pci 0000:00:14.0: setting latency timer to 64
> [ 0.383705] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
> [ 0.383705] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
> [ 0.383705] pci_bus 0000:01: resource 0 io: [0xe000-0xefff]
> [ 0.383705] pci_bus 0000:01: resource 1 mem: [0xfde00000-0xfdefffff]
> [ 0.383705] pci_bus 0000:01: resource 2 pref mem [0xfdd00000-0xfddfffff]
> [ 0.383705] pci_bus 0000:01: resource 3 io: [0x00-0xffff]
> [ 0.383705] pci_bus 0000:01: resource 4 mem: [0x000000-0xffffffffffffffff]
> [ 0.383705] pci_bus 0000:02: resource 0 io: [0xd000-0xdfff]
> [ 0.383705] pci_bus 0000:02: resource 1 mem: [0xfb000000-0xfcffffff]
> [ 0.383705] pci_bus 0000:02: resource 2 pref mem [0xd8000000-0xe7ffffff]
> [ 0.383705] pci_bus 0000:03: resource 0 io: [0xa000-0xcfff]
> [ 0.383705] pci_bus 0000:03: resource 1 mem: [0xfda00000-0xfdcfffff]
> [ 0.383705] pci_bus 0000:03: resource 2 pref mem [0xfd800000-0xfd9fffff]
> [ 0.383705] pci_bus 0000:04: resource 0 io: [0xa000-0xcfff]
> [ 0.383705] pci_bus 0000:04: resource 1 mem: [0xfda00000-0xfdbfffff]
> [ 0.383705] pci_bus 0000:04: resource 2 pref mem [0xfd800000-0xfd9fffff]
> [ 0.383705] pci_bus 0000:05: resource 0 io: [0xc000-0xcfff]
> [ 0.383705] pci_bus 0000:05: resource 1 mem: [0xfdb00000-0xfdbfffff]
> [ 0.383705] pci_bus 0000:05: resource 2 pref mem [0xfd900000-0xfd9fffff]
> [ 0.383705] pci_bus 0000:06: resource 0 io: [0xa000-0xbfff]
> [ 0.383705] pci_bus 0000:06: resource 1 mem: [0xfda00000-0xfdafffff]
> [ 0.383705] pci_bus 0000:06: resource 2 pref mem [0xfd800000-0xfd8fffff]
> [ 0.383705] pci_bus 0000:07: resource 0 io: [0x9000-0x9fff]
> [ 0.383705] pci_bus 0000:07: resource 1 mem: [0xfd700000-0xfd7fffff]
> [ 0.383705] pci_bus 0000:07: resource 2 pref mem [0xfd600000-0xfd6fffff]
> [ 0.383705] pci_bus 0000:08: resource 0 io: [0x8000-0x8fff]
> [ 0.383705] pci_bus 0000:08: resource 1 mem: [0xfd500000-0xfd5fffff]
> [ 0.383705] pci_bus 0000:08: resource 2 pref mem [0xfd400000-0xfd4fffff]
> [ 0.383705] pci_bus 0000:09: resource 0 io: [0x8000-0x8fff]
> [ 0.383705] pci_bus 0000:09: resource 1 mem: [0xfd500000-0xfd5fffff]
> [ 0.383705] pci_bus 0000:09: resource 2 pref mem [0xfd400000-0xfd4fffff]
> [ 0.383705] pci_bus 0000:0a: resource 0 io: [0x7000-0x7fff]
> [ 0.383705] pci_bus 0000:0a: resource 1 mem: [0xfd300000-0xfd3fffff]
> [ 0.383705] pci_bus 0000:0a: resource 2 pref mem [0xfd200000-0xfd2fffff]
> [ 0.399552] NET: Registered protocol family 2
> [ 0.399825] IP route cache hash table entries: 32768 (order: 6, 262144
> bytes)
> [ 0.400480] TCP established hash table entries: 131072 (order: 9, 2097152
> bytes)
> [ 0.401822] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
> [ 0.402010] TCP: Hash tables configured (established 131072 bind 65536)
> [ 0.402010] TCP reno registered
> [ 0.403084] NET: Registered protocol family 1
> [ 0.403362] Trying to unpack rootfs image as initramfs...
> [ 0.411491] Freeing initrd memory: 5929k freed
> [ 0.417154] Microcode Update Driver: v2.00 <tigran@xxxxxxxxxxxxxxxxxxxx>,
> Peter Oruba
> [ 0.417526] Scanning for low memory corruption every 60 seconds
> [ 0.418213] audit: initializing netlink socket (disabled)
> [ 0.418429] type=2000 audit(1271429129.380:1): initialized
> [ 0.427225] HugeTLB registered 2 MB page size, pre-allocated 0 pages
> [ 0.432513] VFS: Disk quotas dquot_6.5.2
> [ 0.432846] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
> [ 0.434686] fuse init (API version 7.12)
> [ 0.435254] msgmni has been set to 1353
> [ 0.435617] SELinux: Registering netfilter hooks
> [ 0.436367] alg: No test for stdrng (krng)
> [ 0.436794] Block layer SCSI generic (bsg) driver version 0.4 loaded
> (major 252)
> [ 0.437162] io scheduler noop registered
> [ 0.437360] io scheduler anticipatory registered
> [ 0.437559] io scheduler deadline registered
> [ 0.437813] io scheduler cfq registered (default)
> [ 0.475508] pci 0000:00:08.0: Enabling HT MSI Mapping
> [ 0.475901] pci 0000:00:09.0: Enabling HT MSI Mapping
> [ 0.476313] pci 0000:00:0a.0: Enabling HT MSI Mapping
> [ 0.476719] pci 0000:00:0b.0: Enabling HT MSI Mapping
> [ 0.477149] pciback 0000:01:08.0: uhci_check_and_reset_hc: legsup = 0x2000
> [ 0.477149] pciback 0000:01:08.0: Performing full reset
> [ 0.477245] pciback 0000:01:08.1: uhci_check_and_reset_hc: legsup = 0x2000
> [ 0.477248] pciback 0000:01:08.1: Performing full reset
> [ 0.477305] pci 0000:02:00.0: Boot video device
> [ 0.477927] alloc irq_desc for 411 on node 0
> [ 0.477931] alloc kstat_irqs on node 0
> [ 0.478054] pcieport-driver 0000:00:10.0: setting latency timer to 64
> [ 0.478623] alloc irq_desc for 410 on node 0
> [ 0.478627] alloc kstat_irqs on node 0
> [ 0.478714] pcieport-driver 0000:00:11.0: setting latency timer to 64
> [ 0.479260] alloc irq_desc for 409 on node 0
> [ 0.479264] alloc kstat_irqs on node 0
> [ 0.479359] pcieport-driver 0000:00:13.0: setting latency timer to 64
> [ 0.479902] alloc irq_desc for 408 on node 0
> [ 0.479905] alloc kstat_irqs on node 0
> [ 0.479990] pcieport-driver 0000:00:14.0: setting latency timer to 64
> [ 0.480349] alloc irq_desc for 407 on node 0
> [ 0.480352] alloc kstat_irqs on node 0
> [ 0.480380] pcieport-driver 0000:03:00.0: setting latency timer to 64
> [ 0.480707] alloc irq_desc for 406 on node 0
> [ 0.480710] alloc kstat_irqs on node 0
> [ 0.480739] pcieport-driver 0000:04:01.0: setting latency timer to 64
> [ 0.481057] alloc irq_desc for 405 on node 0
> [ 0.481060] alloc kstat_irqs on node 0
> [ 0.481096] pcieport-driver 0000:04:02.0: setting latency timer to 64
> [ 0.481499] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
> [ 0.482337] input: Power Button as
> /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
> [ 0.482705] ACPI: Power Button [PWRF]
> [ 0.483039] input: Power Button as
> /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
> [ 0.483407] ACPI: Power Button [PWRB]
> [ 0.483850] fan PNP0C0B:00: registered as cooling_device0
> [ 0.484057] ACPI: Fan [FAN] (on)
> [ 0.497135] ACPI Warning: \_TZ_.THRM._PSL: Return Package type mismatch at
> index 0 - found [NULL Object Descriptor], expected Reference 20090521
> nspredef-946
> [ 0.497576] ACPI: Expecting a [Reference] package element, found type 0
> [ 0.497779] ACPI: Invalid passive threshold
> [ 0.498692] thermal LNXTHERM:01: registered as thermal_zone0
> [ 0.498908] ACPI: Thermal Zone [THRM] (40 C)
> [ 0.499404] Event-channel device installed.
> [ 0.505503] blktap_device_init: blktap device major 253
> [ 0.505718] blktap_ring_init: blktap ring major: 251
> [ 0.507143] registering netback
> [ 0.507468] pciback: pcistub_init_devices_late
> [ 0.507473] pciback 0000:09:01.2: initializing...
> [ 0.507476] pciback 0000:09:01.2: initializing config
> [ 0.507479] pciback 0000:09:01.2: initializing virtual configuration space
> [ 0.507484] pciback 0000:09:01.2: added config field at offset 0x00
> [ 0.507488] pciback 0000:09:01.2: added config field at offset 0x02
> [ 0.507492] pciback 0000:09:01.2: added config field at offset 0x04
> [ 0.507495] pciback 0000:09:01.2: added config field at offset 0x3c
> [ 0.507499] pciback 0000:09:01.2: added config field at offset 0x3d
> [ 0.507503] pciback 0000:09:01.2: added config field at offset 0x0c
> [ 0.507506] pciback 0000:09:01.2: added config field at offset 0x0d
> [ 0.507510] pciback 0000:09:01.2: added config field at offset 0x0f
> [ 0.507514] pciback 0000:09:01.2: added config field at offset 0x10
> [ 0.507518] pciback 0000:09:01.2: added config field at offset 0x14
> [ 0.507522] pciback 0000:09:01.2: added config field at offset 0x18
> [ 0.507526] pciback 0000:09:01.2: added config field at offset 0x1c
> [ 0.507530] pciback 0000:09:01.2: added config field at offset 0x20
> [ 0.507534] pciback 0000:09:01.2: added config field at offset 0x24
> [ 0.507538] pciback 0000:09:01.2: added config field at offset 0x30
> [ 0.507562] pciback 0000:09:01.2: Found capability 0x1 at 0x40
> [ 0.507566] pciback 0000:09:01.2: added config field at offset 0x40
> [ 0.507570] pciback 0000:09:01.2: added config field at offset 0x42
> [ 0.507576] pciback 0000:09:01.2: added config field at offset 0x44
> [ 0.507579] pciback 0000:09:01.2: added config field at offset 0x46
> [ 0.507583] pciback 0000:09:01.2: added config field at offset 0x47
> [ 0.507587] pciback 0000:09:01.2: enabling device
> [ 0.508162] ACPI: PCI Interrupt Link [AE3D] enabled at IRQ 16
> [ 0.508365] xen: registering gsi 16 triggering 0 polarity 1
> [ 0.508369] xen_allocate_pirq: returning irq 16 for gsi 16
> [ 0.508570] xen: --> irq=16
> [ 0.508573] xen_set_ioapic_routing: irq 16 gsi 16 vector 16 ioapic 0 pin
> 16 triggering 1 polarity 1
> [ 0.508950] pciback 0000:09:01.2: PCI INT C -> Link[AE3D] -> GSI 16
> (level, low) -> IRQ 16
> [ 0.509004] pciback 0000:09:01.2: reset device
> [ 0.509004] pciback 0000:09:01.2: PCI INT C disabled
> [ 0.509004] pciback 0000:09:01.1: initializing...
> [ 0.509004] pciback 0000:09:01.1: initializing config
> [ 0.509004] pciback 0000:09:01.1: initializing virtual configuration space
> [ 0.509004] pciback 0000:09:01.1: added config field at offset 0x00
> [ 0.509004] pciback 0000:09:01.1: added config field at offset 0x02
> [ 0.509004] pciback 0000:09:01.1: added config field at offset 0x04
> [ 0.509004] pciback 0000:09:01.1: added config field at offset 0x3c
> [ 0.509004] pciback 0000:09:01.1: added config field at offset 0x3d
> [ 0.509004] pciback 0000:09:01.1: added config field at offset 0x0c
> [ 0.509004] pciback 0000:09:01.1: added config field at offset 0x0d
> [ 0.509004] pciback 0000:09:01.1: added config field at offset 0x0f
> [ 0.509004] pciback 0000:09:01.1: added config field at offset 0x10
> [ 0.509004] pciback 0000:09:01.1: added config field at offset 0x14
> [ 0.509004] pciback 0000:09:01.1: added config field at offset 0x18
> [ 0.509004] pciback 0000:09:01.1: added config field at offset 0x1c
> [ 0.509004] pciback 0000:09:01.1: added config field at offset 0x20
> [ 0.509004] pciback 0000:09:01.1: added config field at offset 0x24
> [ 0.509004] pciback 0000:09:01.1: added config field at offset 0x30
> [ 0.509004] pciback 0000:09:01.1: Found capability 0x1 at 0x40
> [ 0.509004] pciback 0000:09:01.1: added config field at offset 0x40
> [ 0.509004] pciback 0000:09:01.1: added config field at offset 0x42
> [ 0.509004] pciback 0000:09:01.1: added config field at offset 0x44
> [ 0.509004] pciback 0000:09:01.1: added config field at offset 0x46
> [ 0.509004] pciback 0000:09:01.1: added config field at offset 0x47
> [ 0.509004] pciback 0000:09:01.1: enabling device
> [ 0.509004] ACPI: PCI Interrupt Link [AE3C] enabled at IRQ 16
> [ 0.509004] xen: registering gsi 16 triggering 0 polarity 1
> [ 0.509004] xen_allocate_pirq: returning irq 16 for gsi 16
> [ 0.509004] xen: --> irq=16
> [ 0.509004] xen_set_ioapic_routing: irq 16 gsi 16 vector 16 ioapic 0 pin
> 16 triggering 1 polarity 1
> [ 0.509004] pciback 0000:09:01.1: PCI INT B -> Link[AE3C] -> GSI 16
> (level, low) -> IRQ 16
> [ 0.509004] pciback 0000:09:01.1: reset device
> [ 0.509004] pciback 0000:09:01.1: PCI INT B disabled
> [ 0.509004] pciback 0000:09:01.0: initializing...
> [ 0.509004] pciback 0000:09:01.0: initializing config
> [ 0.509004] pciback 0000:09:01.0: initializing virtual configuration space
> [ 0.509004] pciback 0000:09:01.0: added config field at offset 0x00
> [ 0.509004] pciback 0000:09:01.0: added config field at offset 0x02
> [ 0.509004] pciback 0000:09:01.0: added config field at offset 0x04
> [ 0.509004] pciback 0000:09:01.0: added config field at offset 0x3c
> [ 0.509004] pciback 0000:09:01.0: added config field at offset 0x3d
> [ 0.509004] pciback 0000:09:01.0: added config field at offset 0x0c
> [ 0.509004] pciback 0000:09:01.0: added config field at offset 0x0d
> [ 0.509004] pciback 0000:09:01.0: added config field at offset 0x0f
> [ 0.509004] pciback 0000:09:01.0: added config field at offset 0x10
> [ 0.509004] pciback 0000:09:01.0: added config field at offset 0x14
> [ 0.509004] pciback 0000:09:01.0: added config field at offset 0x18
> [ 0.509004] pciback 0000:09:01.0: added config field at offset 0x1c
> [ 0.509004] pciback 0000:09:01.0: added config field at offset 0x20
> [ 0.509004] pciback 0000:09:01.0: added config field at offset 0x24
> [ 0.509004] pciback 0000:09:01.0: added config field at offset 0x30
> [ 0.509004] pciback 0000:09:01.0: Found capability 0x1 at 0x40
> [ 0.509004] pciback 0000:09:01.0: added config field at offset 0x40
> [ 0.509004] pciback 0000:09:01.0: added config field at offset 0x42
> [ 0.509004] pciback 0000:09:01.0: added config field at offset 0x44
> [ 0.509004] pciback 0000:09:01.0: added config field at offset 0x46
> [ 0.509004] pciback 0000:09:01.0: added config field at offset 0x47
> [ 0.509004] pciback 0000:09:01.0: enabling device
> [ 0.509004] ACPI: PCI Interrupt Link [AE3B] enabled at IRQ 16
> [ 0.509004] xen: registering gsi 16 triggering 0 polarity 1
> [ 0.509004] xen_allocate_pirq: returning irq 16 for gsi 16
> [ 0.509004] xen: --> irq=16
> [ 0.509004] xen_set_ioapic_routing: irq 16 gsi 16 vector 16 ioapic 0 pin
> 16 triggering 1 polarity 1
> [ 0.509004] pciback 0000:09:01.0: PCI INT A -> Link[AE3B] -> GSI 16
> (level, low) -> IRQ 16
> [ 0.509004] pciback 0000:09:01.0: reset device
> [ 0.509004] pciback 0000:09:01.0: PCI INT A disabled
> [ 0.509004] pciback 0000:05:00.0: initializing...
> [ 0.509004] pciback 0000:05:00.0: initializing config
> [ 0.509004] pciback 0000:05:00.0: initializing virtual configuration space
> [ 0.509004] pciback 0000:05:00.0: added config field at offset 0x00
> [ 0.509004] pciback 0000:05:00.0: added config field at offset 0x02
> [ 0.509004] pciback 0000:05:00.0: added config field at offset 0x04
> [ 0.513202] pciback 0000:05:00.0: added config field at offset 0x3c
> [ 0.513205] pciback 0000:05:00.0: added config field at offset 0x3d
> [ 0.513208] pciback 0000:05:00.0: added config field at offset 0x0c
> [ 0.513211] pciback 0000:05:00.0: added config field at offset 0x0d
> [ 0.513215] pciback 0000:05:00.0: added config field at offset 0x0f
> [ 0.513218] pciback 0000:05:00.0: added config field at offset 0x10
> [ 0.513221] pciback 0000:05:00.0: added config field at offset 0x14
> [ 0.513225] pciback 0000:05:00.0: added config field at offset 0x18
> [ 0.513228] pciback 0000:05:00.0: added config field at offset 0x1c
> [ 0.513231] pciback 0000:05:00.0: added config field at offset 0x20
> [ 0.513235] pciback 0000:05:00.0: added config field at offset 0x24
> [ 0.513238] pciback 0000:05:00.0: added config field at offset 0x30
> [ 0.513269] pciback 0000:05:00.0: Found capability 0x1 at 0x50
> [ 0.513272] pciback 0000:05:00.0: added config field at offset 0x50
> [ 0.513275] pciback 0000:05:00.0: added config field at offset 0x52
> [ 0.513280] pciback 0000:05:00.0: added config field at offset 0x54
> [ 0.513284] pciback 0000:05:00.0: added config field at offset 0x56
> [ 0.513287] pciback 0000:05:00.0: added config field at offset 0x57
> [ 0.513290] pciback 0000:05:00.0: enabling device
> [ 0.513302] xen: registering gsi 16 triggering 0 polarity 1
> [ 0.513305] xen_allocate_pirq: returning irq 16 for gsi 16
> [ 0.513506] xen: --> irq=16
> [ 0.513509] xen_set_ioapic_routing: irq 16 gsi 16 vector 16 ioapic 0 pin
> 16 triggering 1 polarity 1
> [ 0.513882] pciback 0000:05:00.0: PCI INT A -> Link[AE0B] -> GSI 16
> (level, low) -> IRQ 16
> [ 0.514192] pciback 0000:05:00.0: reset device
> [ 0.514192] pciback 0000:05:00.0: PCI INT A disabled
> [ 0.514192] pciback 0000:01:08.2: initializing...
> [ 0.514192] pciback 0000:01:08.2: initializing config
> [ 0.514192] pciback 0000:01:08.2: initializing virtual configuration space
> [ 0.514192] pciback 0000:01:08.2: added config field at offset 0x00
> [ 0.514192] pciback 0000:01:08.2: added config field at offset 0x02
> [ 0.514192] pciback 0000:01:08.2: added config field at offset 0x04
> [ 0.514192] pciback 0000:01:08.2: added config field at offset 0x3c
> [ 0.514192] pciback 0000:01:08.2: added config field at offset 0x3d
> [ 0.514192] pciback 0000:01:08.2: added config field at offset 0x0c
> [ 0.514192] pciback 0000:01:08.2: added config field at offset 0x0d
> [ 0.514192] pciback 0000:01:08.2: added config field at offset 0x0f
> [ 0.514192] pciback 0000:01:08.2: added config field at offset 0x10
> [ 0.514192] pciback 0000:01:08.2: added config field at offset 0x14
> [ 0.514192] pciback 0000:01:08.2: added config field at offset 0x18
> [ 0.514192] pciback 0000:01:08.2: added config field at offset 0x1c
> [ 0.514192] pciback 0000:01:08.2: added config field at offset 0x20
> [ 0.514192] pciback 0000:01:08.2: added config field at offset 0x24
> [ 0.514192] pciback 0000:01:08.2: added config field at offset 0x30
> [ 0.514192] pciback 0000:01:08.2: Found capability 0x1 at 0x80
> [ 0.514192] pciback 0000:01:08.2: added config field at offset 0x80
> [ 0.514192] pciback 0000:01:08.2: added config field at offset 0x82
> [ 0.514192] pciback 0000:01:08.2: added config field at offset 0x84
> [ 0.514192] pciback 0000:01:08.2: added config field at offset 0x86
> [ 0.514192] pciback 0000:01:08.2: added config field at offset 0x87
> [ 0.514192] pciback 0000:01:08.2: enabling device
> [ 0.514192] ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18
> [ 0.514192] xen: registering gsi 18 triggering 0 polarity 1
> [ 0.514192] alloc irq_desc for 18 on node 0
> [ 0.514192] alloc kstat_irqs on node 0
> [ 0.515133] xen: --> irq=18
> [ 0.515136] xen_set_ioapic_routing: irq 18 gsi 18 vector 18 ioapic 0 pin
> 18 triggering 1 polarity 1
> [ 0.515514] pciback 0000:01:08.2: PCI INT C -> Link[APC3] -> GSI 18
> (level, low) -> IRQ 18
> [ 0.515881] pciback 0000:01:08.2: reset device
> [ 0.515889] pciback 0000:01:08.2: PCI INT C disabled
> [ 0.516091] pciback 0000:01:08.1: initializing...
> [ 0.516094] pciback 0000:01:08.1: initializing config
> [ 0.516096] pciback 0000:01:08.1: initializing virtual configuration space
> [ 0.516099] pciback 0000:01:08.1: added config field at offset 0x00
> [ 0.516102] pciback 0000:01:08.1: added config field at offset 0x02
> [ 0.516105] pciback 0000:01:08.1: added config field at offset 0x04
> [ 0.516108] pciback 0000:01:08.1: added config field at offset 0x3c
> [ 0.516111] pciback 0000:01:08.1: added config field at offset 0x3d
> [ 0.516114] pciback 0000:01:08.1: added config field at offset 0x0c
> [ 0.516117] pciback 0000:01:08.1: added config field at offset 0x0d
> [ 0.516120] pciback 0000:01:08.1: added config field at offset 0x0f
> [ 0.516123] pciback 0000:01:08.1: added config field at offset 0x10
> [ 0.516126] pciback 0000:01:08.1: added config field at offset 0x14
> [ 0.516128] pciback 0000:01:08.1: added config field at offset 0x18
> [ 0.516128] pciback 0000:01:08.1: added config field at offset 0x1c
> [ 0.516128] pciback 0000:01:08.1: added config field at offset 0x20
> [ 0.516128] pciback 0000:01:08.1: added config field at offset 0x24
> [ 0.516128] pciback 0000:01:08.1: added config field at offset 0x30
> [ 0.516128] pciback 0000:01:08.1: Found capability 0x1 at 0x80
> [ 0.516128] pciback 0000:01:08.1: added config field at offset 0x80
> [ 0.516128] pciback 0000:01:08.1: added config field at offset 0x82
> [ 0.516128] pciback 0000:01:08.1: added config field at offset 0x84
> [ 0.516128] pciback 0000:01:08.1: added config field at offset 0x86
> [ 0.516128] pciback 0000:01:08.1: added config field at offset 0x87
> [ 0.516128] pciback 0000:01:08.1: enabling device
> [ 0.516128] ACPI: PCI Interrupt Link [APC2] enabled at IRQ 17
> [ 0.516128] xen: registering gsi 17 triggering 0 polarity 1
> [ 0.516128] alloc irq_desc for 17 on node 0
> [ 0.516128] alloc kstat_irqs on node 0
> [ 0.516762] xen: --> irq=17
> [ 0.516765] xen_set_ioapic_routing: irq 17 gsi 17 vector 17 ioapic 0 pin
> 17 triggering 1 polarity 1
> [ 0.517139] pciback 0000:01:08.1: PCI INT B -> Link[APC2] -> GSI 17
> (level, low) -> IRQ 17
> [ 0.517505] pciback 0000:01:08.1: reset device
> [ 0.517513] pciback 0000:01:08.1: PCI INT B disabled
> [ 0.517714] pciback 0000:01:08.0: initializing...
> [ 0.517717] pciback 0000:01:08.0: initializing config
> [ 0.517720] pciback 0000:01:08.0: initializing virtual configuration space
> [ 0.517723] pciback 0000:01:08.0: added config field at offset 0x00
> [ 0.517725] pciback 0000:01:08.0: added config field at offset 0x02
> [ 0.517728] pciback 0000:01:08.0: added config field at offset 0x04
> [ 0.517731] pciback 0000:01:08.0: added config field at offset 0x3c
> [ 0.517743] pciback 0000:01:08.0: added config field at offset 0x3d
> [ 0.517746] pciback 0000:01:08.0: added config field at offset 0x0c
> [ 0.517749] pciback 0000:01:08.0: added config field at offset 0x0d
> [ 0.517752] pciback 0000:01:08.0: added config field at offset 0x0f
> [ 0.517756] pciback 0000:01:08.0: added config field at offset 0x10
> [ 0.517759] pciback 0000:01:08.0: added config field at offset 0x14
> [ 0.517763] pciback 0000:01:08.0: added config field at offset 0x18
> [ 0.517766] pciback 0000:01:08.0: added config field at offset 0x1c
> [ 0.517769] pciback 0000:01:08.0: added config field at offset 0x20
> [ 0.517772] pciback 0000:01:08.0: added config field at offset 0x24
> [ 0.517776] pciback 0000:01:08.0: added config field at offset 0x30
> [ 0.517791] pciback 0000:01:08.0: Found capability 0x1 at 0x80
> [ 0.517794] pciback 0000:01:08.0: added config field at offset 0x80
> [ 0.517798] pciback 0000:01:08.0: added config field at offset 0x82
> [ 0.517803] pciback 0000:01:08.0: added config field at offset 0x84
> [ 0.517806] pciback 0000:01:08.0: added config field at offset 0x86
> [ 0.517809] pciback 0000:01:08.0: added config field at offset 0x87
> [ 0.517812] pciback 0000:01:08.0: enabling device
> [ 0.518313] ACPI: PCI Interrupt Link [APC1] enabled at IRQ 16
> [ 0.518516] xen: registering gsi 16 triggering 0 polarity 1
> [ 0.518519] xen_allocate_pirq: returning irq 16 for gsi 16
> [ 0.518719] xen: --> irq=16
> [ 0.518722] xen_set_ioapic_routing: irq 16 gsi 16 vector 16 ioapic 0 pin
> 16 triggering 1 polarity 1
> [ 0.519002] pciback 0000:01:08.0: PCI INT A -> Link[APC1] -> GSI 16
> (level, low) -> IRQ 16
> [ 0.519002] pciback 0000:01:08.0: reset device
> [ 0.519002] pciback 0000:01:08.0: PCI INT A disabled
> [ 0.519002] pciback 0000:00:07.0: initializing...
> [ 0.519002] pciback 0000:00:07.0: initializing config
> [ 0.519002] pciback 0000:00:07.0: initializing virtual configuration space
> [ 0.519002] pciback 0000:00:07.0: added config field at offset 0x00
> [ 0.519002] pciback 0000:00:07.0: added config field at offset 0x02
> [ 0.519002] pciback 0000:00:07.0: added config field at offset 0x04
> [ 0.519002] pciback 0000:00:07.0: added config field at offset 0x3c
> [ 0.519002] pciback 0000:00:07.0: added config field at offset 0x3d
> [ 0.519002] pciback 0000:00:07.0: added config field at offset 0x0c
> [ 0.519002] pciback 0000:00:07.0: added config field at offset 0x0d
> [ 0.519002] pciback 0000:00:07.0: added config field at offset 0x0f
> [ 0.519002] pciback 0000:00:07.0: added config field at offset 0x10
> [ 0.519002] pciback 0000:00:07.0: added config field at offset 0x14
> [ 0.519002] pciback 0000:00:07.0: added config field at offset 0x18
> [ 0.519002] pciback 0000:00:07.0: added config field at offset 0x1c
> [ 0.519002] pciback 0000:00:07.0: added config field at offset 0x20
> [ 0.519002] pciback 0000:00:07.0: added config field at offset 0x24
> [ 0.519002] pciback 0000:00:07.0: added config field at offset 0x30
> [ 0.519002] pciback 0000:00:07.0: Found capability 0x1 at 0x44
> [ 0.519002] pciback 0000:00:07.0: added config field at offset 0x44
> [ 0.519002] pciback 0000:00:07.0: added config field at offset 0x46
> [ 0.519002] pciback 0000:00:07.0: added config field at offset 0x48
> [ 0.519002] pciback 0000:00:07.0: added config field at offset 0x4a
> [ 0.519002] pciback 0000:00:07.0: added config field at offset 0x4b
> [ 0.519002] pciback 0000:00:07.0: enabling device
> [ 0.519002] ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 23
> [ 0.519002] xen: registering gsi 23 triggering 0 polarity 1
> [ 0.519002] alloc irq_desc for 23 on node 0
> [ 0.519002] alloc kstat_irqs on node 0
> [ 0.520341] xen: --> irq=23
> [ 0.520344] xen_set_ioapic_routing: irq 23 gsi 23 vector 23 ioapic 0 pin
> 23 triggering 1 polarity 1
> [ 0.520717] pciback 0000:00:07.0: PCI INT A -> Link[AAZA] -> GSI 23
> (level, low) -> IRQ 23
> [ 0.521084] pciback 0000:00:07.0: reset device
> [ 0.521091] pciback 0000:00:07.0: PCI INT A disabled
> [ 0.527829] alloc irq_desc for 404 on node 0
> [ 0.527833] alloc kstat_irqs on node 0
> [ 0.528935] hpet_acpi_add: no address or irqs in _CRS
> [ 0.529385] Non-volatile memory driver v1.3
> [ 0.529712] Linux agpgart interface v0.103
> [ 0.530180] [drm] Initialized drm 1.1.0 20060810
> [ 0.530458] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
> [ 0.774119] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
> [ 0.775104] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
> [ 0.778904] brd: module loaded
> [ 0.843826] loop: module loaded
> [ 0.844678] ahci 0000:00:09.0: version 3.0
> [ 0.845277] ACPI: PCI Interrupt Link [APSI] enabled at IRQ 22
> [ 0.845481] xen: registering gsi 22 triggering 0 polarity 1
> [ 0.845488] alloc irq_desc for 22 on node 0
> [ 0.845491] alloc kstat_irqs on node 0
> [ 0.845497] xen: --> irq=22
> [ 0.845500] xen_set_ioapic_routing: irq 22 gsi 22 vector 22 ioapic 0 pin
> 22 triggering 1 polarity 1
> [ 0.845877] ahci 0000:00:09.0: PCI INT A -> Link[APSI] -> GSI 22 (level,
> low) -> IRQ 22
> [ 0.846006] alloc irq_desc for 403 on node 0
> [ 0.846006] alloc kstat_irqs on node 0
> [ 0.846413] ahci 0000:00:09.0: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f
> impl SATA mode
> [ 0.846781] ahci 0000:00:09.0: flags: 64bit ncq sntf led clo pmp pio
> [ 0.846987] ahci 0000:00:09.0: setting latency timer to 64
> [ 0.848179] scsi0 : ahci
> [ 0.848642] scsi1 : ahci
> [ 0.849127] scsi2 : ahci
> [ 0.849521] scsi3 : ahci
> [ 0.849917] scsi4 : ahci
> [ 0.850338] scsi5 : ahci
> [ 0.850943] ata1: SATA max UDMA/133 abar m8192@0xfe026000 port 0xfe026100
> irq 403
> [ 0.851311] ata2: SATA max UDMA/133 abar m8192@0xfe026000 port 0xfe026180
> irq 403
> [ 0.851677] ata3: SATA max UDMA/133 abar m8192@0xfe026000 port 0xfe026200
> irq 403
> [ 0.851692] ata4: SATA max UDMA/133 abar m8192@0xfe026000 port 0xfe026280
> irq 403
> [ 0.851692] ata5: SATA max UDMA/133 abar m8192@0xfe026000 port 0xfe026300
> irq 403
> [ 0.851692] ata6: SATA max UDMA/133 abar m8192@0xfe026000 port 0xfe026380
> irq 403
> [ 0.853237] xen: registering gsi 16 triggering 0 polarity 1
> [ 0.853241] xen_allocate_pirq: returning irq 16 for gsi 16
> [ 0.853442] xen: --> irq=16
> [ 0.853446] xen_set_ioapic_routing: irq 16 gsi 16 vector 16 ioapic 0 pin
> 16 triggering 1 polarity 1
> [ 0.853822] ahci 0000:06:00.0: PCI INT A -> Link[AE0C] -> GSI 16 (level,
> low) -> IRQ 16
> [ 0.854171] alloc irq_desc for 402 on node 0
> [ 0.854171] alloc kstat_irqs on node 0
> [ 0.854362] ahci 0000:06:00.0: AHCI 0001.0000 32 slots 2 ports 6 Gbps 0x3
> impl SATA mode
> [ 0.854730] ahci 0000:06:00.0: flags: 64bit ncq sntf led only pmp pio slum
> part
> [ 0.855100] ahci 0000:06:00.0: setting latency timer to 64
> [ 0.855579] scsi6 : ahci
> [ 0.856124] scsi7 : ahci
> [ 0.856515] ata7: SATA max UDMA/133 abar m2048@0xfdaff000 port 0xfdaff100
> irq 402
> [ 0.856883] ata8: SATA max UDMA/133 abar m2048@0xfdaff000 port 0xfdaff180
> irq 402
> [ 0.857534] pata_amd 0000:00:06.0: version 0.4.1
> [ 0.857593] pata_amd 0000:00:06.0: setting latency timer to 64
> [ 0.857745] scsi8 : pata_amd
> [ 0.865544] scsi9 : pata_amd
> [ 0.866929] ata9: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xfc00 irq 14
> [ 0.867135] ata10: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xfc08 irq
> 15
> [ 0.867822] Intel(R) PRO/1000 Network Driver - version 7.3.21-k3-NAPI
> [ 0.868028] Copyright (c) 1999-2006 Intel Corporation.
> [ 0.868330] e1000e: Intel(R) PRO/1000 Network Driver - 1.0.2-k2
> [ 0.868534] e1000e: Copyright (c) 1999-2008 Intel Corporation.
> [ 0.868794] xen: registering gsi 16 triggering 0 polarity 1
> [ 0.868797] xen_allocate_pirq: returning irq 16 for gsi 16
> [ 0.868999] xen: --> irq=16
> [ 0.869002] xen_set_ioapic_routing: irq 16 gsi 16 vector 16 ioapic 0 pin
> 16 triggering 1 polarity 1
> [ 0.869317] e1000e 0000:0a:00.0: PCI INT A -> Link[AE4A] -> GSI 16 (level,
> low) -> IRQ 16
> [ 0.869317] e1000e 0000:0a:00.0: setting latency timer to 64
> [ 0.869317] alloc irq_desc for 401 on node 0
> [ 0.869317] alloc kstat_irqs on node 0
> [ 1.023795] 0000:0a:00.0: eth0: (PCI Express:2.5GB/s:Width x1)
> 00:1b:21:2c:68:fe
> [ 1.024188] 0000:0a:00.0: eth0: Intel(R) PRO/1000 Network Connection
> [ 1.024251] 0000:0a:00.0: eth0: MAC: 1, PHY: 4, PBA No: d50854-003
> [ 1.024856] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
> [ 1.025074] e100: Copyright(c) 1999-2006 Intel Corporation
> [ 1.025506] sky2 driver version 1.23
> [ 1.025807] forcedeth: Reverse Engineered nForce ethernet driver. Version
> 0.64.
> [ 1.026747] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 21
> [ 1.026963] xen: registering gsi 21 triggering 0 polarity 1
> [ 1.026969] alloc irq_desc for 21 on node 0
> [ 1.026972] alloc kstat_irqs on node 0
> [ 1.026978] xen: --> irq=21
> [ 1.026981] xen_set_ioapic_routing: irq 21 gsi 21 vector 21 ioapic 0 pin
> 21 triggering 1 polarity 1
> [ 1.027253] forcedeth 0000:00:0a.0: PCI INT A -> Link[APCH] -> GSI 21
> (level, low) -> IRQ 21
> [ 1.027253] forcedeth 0000:00:0a.0: setting latency timer to 64
> [ 1.160267] ata4: SATA link down (SStatus 0 SControl 300)
> [ 1.160494] ata3: SATA link down (SStatus 0 SControl 300)
> [ 1.160713] ata2: SATA link down (SStatus 0 SControl 300)
> [ 1.162017] ata6: SATA link down (SStatus 0 SControl 300)
> [ 1.163025] ata7: SATA link down (SStatus 0 SControl 370)
> [ 1.168018] ata5: SATA link down (SStatus 0 SControl 300)
> [ 1.168247] ata8: SATA link down (SStatus 0 SControl 370)
> [ 1.312020] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
> [ 1.313489] ata1.00: ATA-8: Hitachi HDS722020ALA330, JKAOA20N, max UDMA/133
> [ 1.313694] ata1.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32)
> [ 1.315297] ata1.00: configured for UDMA/133
> [ 1.315632] scsi 0:0:0:0: Direct-Access ATA Hitachi HDS72202 JKAO
> PQ: 0 ANSI: 5
> [ 1.316568] sd 0:0:0:0: Attached scsi generic sg0 type 0
> [ 1.316852] sd 0:0:0:0: [sda] 3907029168 512-byte logical blocks: (2.00
> TB/1.81 TiB)
> [ 1.317405] ata10: port disabled. ignoring.
> [ 1.317480] sd 0:0:0:0: [sda] Write Protect is off
> [ 1.317682] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
> [ 1.317725] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled,
> doesn't support DPO or FUA
> [ 1.318370] sda: sda1 sda2
> [ 1.325471] sd 0:0:0:0: [sda] Attached SCSI disk
> [ 1.533533] forcedeth 0000:00:0a.0: ifname eth1, PHY OUI 0x1374 @ 1, addr
> 00:1f:c6:8c:5e:b2
> [ 1.533904] forcedeth 0000:00:0a.0: highdma csum pwrctl mgmt gbit lnktim
> msi desc-v3
> [ 1.534449] tun: Universal TUN/TAP device driver, 1.6
> [ 1.534651] tun: (C) 1999-2004 Max Krasnyansky <maxk@xxxxxxxxxxxx>
> [ 1.535019] console [netcon0] enabled
> [ 1.535219] netconsole: network logging started
> [ 1.535695] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
> [ 1.535900] ehci_hcd: block sizes: qh 192 qtd 96 itd 192 sitd 96
> [ 1.535986] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
> [ 1.536190] ohci_hcd: block sizes: ed 80 td 96
> [ 1.536768] ACPI: PCI Interrupt Link [AUBA] enabled at IRQ 20
> [ 1.536972] xen: registering gsi 20 triggering 0 polarity 1
> [ 1.536979] alloc irq_desc for 20 on node 0
> [ 1.536982] alloc kstat_irqs on node 0
> [ 1.536988] xen: --> irq=20
> [ 1.536991] xen_set_ioapic_routing: irq 20 gsi 20 vector 20 ioapic 0 pin
> 20 triggering 1 polarity 1
> [ 1.537254] ohci_hcd 0000:00:02.0: PCI INT A -> Link[AUBA] -> GSI 20
> (level, low) -> IRQ 20
> [ 1.537254] ohci_hcd 0000:00:02.0: setting latency timer to 64
> [ 1.537254] ohci_hcd 0000:00:02.0: OHCI Host Controller
> [ 1.538009]
> /usr/src/xen-unstable.hg/linux-2.6-pvops.git/drivers/usb/core/inode.c:
> creating file 'devices'
> [ 1.538015]
> /usr/src/xen-unstable.hg/linux-2.6-pvops.git/drivers/usb/core/inode.c:
> creating file '001'
> [ 1.538125] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus
> number 1
> [ 1.538539] ohci_hcd 0000:00:02.0: created debug files
> [ 1.538543] ohci_hcd 0000:00:02.0: supports USB remote wakeup
> [ 1.538578] ohci_hcd 0000:00:02.0: irq 20, io mem 0xfe02f000
> [ 1.591023] ohci_hcd 0000:00:02.0: OHCI controller state
> [ 1.591027] ohci_hcd 0000:00:02.0: OHCI 1.0, NO legacy support registers
> [ 1.591032] ohci_hcd 0000:00:02.0: control 0x683 RWE RWC HCFS=operational
> CBSR=3
> [ 1.591036] ohci_hcd 0000:00:02.0: cmdstatus 0x00000 SOC=0
> [ 1.591041] ohci_hcd 0000:00:02.0: intrstatus 0x00000004 SF
> [ 1.591045] ohci_hcd 0000:00:02.0: intrenable 0x8000005a MIE RHSC UE RD WDH
> [ 1.591051] ohci_hcd 0000:00:02.0: hcca frame #0003
> [ 1.591056] ohci_hcd 0000:00:02.0: roothub.a 01000206 POTPGT=1 NPS NDP=6(6)
> [ 1.591060] ohci_hcd 0000:00:02.0: roothub.b 00000000 PPCM=0000 DR=0000
> [ 1.591065] ohci_hcd 0000:00:02.0: roothub.status 00008000 DRWE
> [ 1.591070] ohci_hcd 0000:00:02.0: roothub.portstatus [0] 0x00000100 PPS
> [ 1.591075] ohci_hcd 0000:00:02.0: roothub.portstatus [1] 0x00000100 PPS
> [ 1.591079] ohci_hcd 0000:00:02.0: roothub.portstatus [2] 0x00000100 PPS
> [ 1.591084] ohci_hcd 0000:00:02.0: roothub.portstatus [3] 0x00000100 PPS
> [ 1.591089] ohci_hcd 0000:00:02.0: roothub.portstatus [4] 0x00000100 PPS
> [ 1.591094] ohci_hcd 0000:00:02.0: roothub.portstatus [5] 0x00000100 PPS
> [ 1.591117] usb usb1: default language 0x0409
> [ 1.591130] usb usb1: udev 1, busnum 1, minor = 0
> [ 1.591133] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
> [ 1.591252] usb usb1: New USB device strings: Mfr=3, Product=2,
> SerialNumber=1
> [ 1.591252] usb usb1: Product: OHCI Host Controller
> [ 1.591252] usb usb1: Manufacturer: Linux 2.6.31.13 ohci_hcd
> [ 1.591252] usb usb1: SerialNumber: 0000:00:02.0
> [ 1.592359] usb usb1: uevent
> [ 1.592438] usb usb1: usb_probe_device
> [ 1.592442] usb usb1: configuration #1 chosen from 1 choice
> [ 1.592653] usb usb1: adding 1-0:1.0 (config #1, interface 0)
> [ 1.592672] usb 1-0:1.0: uevent
> [ 1.592742] hub 1-0:1.0: usb_probe_interface
> [ 1.592745] hub 1-0:1.0: usb_probe_interface - got id
> [ 1.592749] hub 1-0:1.0: USB hub found
> [ 1.592969] hub 1-0:1.0: 6 ports detected
> [ 1.593168] hub 1-0:1.0: standalone hub
> [ 1.593171] hub 1-0:1.0: no power switching (usb 1.0)
> [ 1.593174] hub 1-0:1.0: global over-current protection
> [ 1.593177] hub 1-0:1.0: power on to power good time: 2ms
> [ 1.593186] hub 1-0:1.0: local power source is good
> [ 1.593189] hub 1-0:1.0: no over-current condition exists
> [ 1.593193] hub 1-0:1.0: trying to enable port power on non-switchable hub
> [ 1.593223]
> /usr/src/xen-unstable.hg/linux-2.6-pvops.git/drivers/usb/core/inode.c:
> creating file '001'
> [ 1.593784] ACPI: PCI Interrupt Link [AU1B] enabled at IRQ 23
> [ 1.593987] xen: registering gsi 23 triggering 0 polarity 1
> [ 1.593991] xen_allocate_pirq: returning irq 23 for gsi 23
> [ 1.594192] xen: --> irq=23
> [ 1.594195] xen_set_ioapic_routing: irq 23 gsi 23 vector 23 ioapic 0 pin
> 23 triggering 1 polarity 1
> [ 1.594253] ohci_hcd 0000:00:04.0: PCI INT A -> Link[AU1B] -> GSI 23
> (level, low) -> IRQ 23
> [ 1.594253] ohci_hcd 0000:00:04.0: setting latency timer to 64
> [ 1.594253] ohci_hcd 0000:00:04.0: OHCI Host Controller
> [ 1.595176]
> /usr/src/xen-unstable.hg/linux-2.6-pvops.git/drivers/usb/core/inode.c:
> creating file '002'
> [ 1.595285] ohci_hcd 0000:00:04.0: new USB bus registered, assigned bus
> number 2
> [ 1.595682] ohci_hcd 0000:00:04.0: created debug files
> [ 1.595685] ohci_hcd 0000:00:04.0: supports USB remote wakeup
> [ 1.595715] ohci_hcd 0000:00:04.0: irq 23, io mem 0xfe02d000
> [ 1.648025] ohci_hcd 0000:00:04.0: OHCI controller state
> [ 1.648029] ohci_hcd 0000:00:04.0: OHCI 1.0, NO legacy support registers
> [ 1.648034] ohci_hcd 0000:00:04.0: control 0x683 RWE RWC HCFS=operational
> CBSR=3
> [ 1.648038] ohci_hcd 0000:00:04.0: cmdstatus 0x00000 SOC=0
> [ 1.648042] ohci_hcd 0000:00:04.0: intrstatus 0x00000004 SF
> [ 1.648046] ohci_hcd 0000:00:04.0: intrenable 0x8000005a MIE RHSC UE RD WDH
> [ 1.648052] ohci_hcd 0000:00:04.0: hcca frame #0003
> [ 1.648057] ohci_hcd 0000:00:04.0: roothub.a 01000206 POTPGT=1 NPS NDP=6(6)
> [ 1.648061] ohci_hcd 0000:00:04.0: roothub.b 00000000 PPCM=0000 DR=0000
> [ 1.648066] ohci_hcd 0000:00:04.0: roothub.status 00008000 DRWE
> [ 1.648070] ohci_hcd 0000:00:04.0: roothub.portstatus [0] 0x00000100 PPS
> [ 1.648075] ohci_hcd 0000:00:04.0: roothub.portstatus [1] 0x00000100 PPS
> [ 1.648080] ohci_hcd 0000:00:04.0: roothub.portstatus [2] 0x00000100 PPS
> [ 1.648084] ohci_hcd 0000:00:04.0: roothub.portstatus [3] 0x00000100 PPS
> [ 1.648089] ohci_hcd 0000:00:04.0: roothub.portstatus [4] 0x00000100 PPS
> [ 1.648094] ohci_hcd 0000:00:04.0: roothub.portstatus [5] 0x00000100 PPS
> [ 1.648112] usb usb2: default language 0x0409
> [ 1.648124] usb usb2: udev 1, busnum 2, minor = 128
> [ 1.648128] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
> [ 1.648252] usb usb2: New USB device strings: Mfr=3, Product=2,
> SerialNumber=1
> [ 1.648252] usb usb2: Product: OHCI Host Controller
> [ 1.648252] usb usb2: Manufacturer: Linux 2.6.31.13 ohci_hcd
> [ 1.648252] usb usb2: SerialNumber: 0000:00:04.0
> [ 1.649346] usb usb2: uevent
> [ 1.649420] usb usb2: usb_probe_device
> [ 1.649424] usb usb2: configuration #1 chosen from 1 choice
> [ 1.649633] usb usb2: adding 2-0:1.0 (config #1, interface 0)
> [ 1.649656] usb 2-0:1.0: uevent
> [ 1.649724] hub 2-0:1.0: usb_probe_interface
> [ 1.649727] hub 2-0:1.0: usb_probe_interface - got id
> [ 1.649731] hub 2-0:1.0: USB hub found
> [ 1.649952] hub 2-0:1.0: 6 ports detected
> [ 1.650151] hub 2-0:1.0: standalone hub
> [ 1.650154] hub 2-0:1.0: no power switching (usb 1.0)
> [ 1.650157] hub 2-0:1.0: global over-current protection
> [ 1.650160] hub 2-0:1.0: power on to power good time: 2ms
> [ 1.650168] hub 2-0:1.0: local power source is good
> [ 1.650171] hub 2-0:1.0: no over-current condition exists
> [ 1.650174] hub 2-0:1.0: trying to enable port power on non-switchable hub
> [ 1.650203]
> /usr/src/xen-unstable.hg/linux-2.6-pvops.git/drivers/usb/core/inode.c:
> creating file '001'
> [ 1.650327] uhci_hcd: USB Universal Host Controller Interface driver
> [ 1.650814] usbcore: registered new interface driver usblp
> [ 1.651018] Initializing USB Mass Storage driver...
> [ 1.651307] usbcore: registered new interface driver usb-storage
> [ 1.651512] USB Mass Storage support registered.
> [ 1.651789] usbcore: registered new interface driver libusual
> [ 1.652277] PNP: No PS/2 controller found. Probing ports directly.
> [ 1.653055] serio: i8042 KBD port at 0x60,0x64 irq 1
> [ 1.653264] serio: i8042 AUX port at 0x60,0x64 irq 12
> [ 1.653613] mice: PS/2 mouse device common for all mice
> [ 1.654242] rtc_cmos 00:05: RTC can wake from S4
> [ 1.654554] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
> [ 1.654816] rtc0: alarms up to one year, y3k, 242 bytes nvram
> [ 1.656543] applesmc: supported laptop not found!
> [ 1.656745] applesmc: driver init failed (ret=-19)!
> [ 1.658504] hdaps: supported laptop not found!
> [ 1.658706] hdaps: driver init failed (ret=-19)!
> [ 1.659198] it87: Found IT8716F chip at 0x290, revision 3
> [ 1.659411] it87: in3 is VCC (+5V)
> [ 1.659608] it87: in7 is VCCH (+5V Stand-By)
> [ 1.659892] ACPI: I/O resource it87 [0x295-0x296] conflicts with ACPI
> region IP__ [0x295-0x296]
> [ 1.660262] ACPI: If an ACPI driver is available for this device, you
> should use it instead of the native driver
> [ 1.660714] k8temp 0000:00:18.3: Temperature readouts might be wrong -
> check erratum #141
> [ 1.661413] lis3lv02d driver loaded.
> [ 1.662868] pc87360: PC8736x not detected, module not inserted.
> [ 1.664350] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised:
> dm-devel@xxxxxxxxxx
> [ 1.665161] cpuidle: using governor ladder
> [ 1.665361] cpuidle: using governor menu
> [ 1.667987] usbcore: registered new interface driver hiddev
> [ 1.668322] usbcore: registered new interface driver usbhid
> [ 1.668525] usbhid: v2.6:USB HID core driver
> [ 1.669010] Advanced Linux Sound Architecture Driver Version 1.0.20.
> [ 1.673278] ALSA device list:
> [ 1.673476] No soundcards found.
> [ 1.673731] Netfilter messages via NETLINK v0.30.
> [ 1.673952] nf_conntrack version 0.5.0 (6092 buckets, 24368 max)
> [ 1.674474] CONFIG_NF_CT_ACCT is deprecated and will be removed soon.
> Please use
> [ 1.674841] nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack
> module option or
> [ 1.675208] sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
> [ 1.675497] ctnetlink v0.93: registering with nfnetlink.
> [ 1.676291] ip_tables: (C) 2000-2006 Netfilter Core Team
> [ 1.676522] TCP cubic registered
> [ 1.676720] Initializing XFRM netlink socket
> [ 1.677333] NET: Registered protocol family 10
> [ 1.678847] IPv6 over IPv4 tunneling driver
> [ 1.679740] NET: Registered protocol family 17
> [ 1.679997] Bridge firewalling registered
> [ 1.680509] RPC: Registered udp transport module.
> [ 1.680711] RPC: Registered tcp transport module.
> [ 1.681223] PM: Resume from disk failed.
> [ 1.681239] registered taskstats version 1
> [ 1.681668] Magic number: 6:908:788
> [ 1.681929] bdi 7:118: hash matches
> [ 1.682370] Freeing unused kernel memory: 560k freed
> [ 1.682835] Write protecting the kernel read-only data: 8528k
> [ 1.693326] hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0000
> [ 1.750328] hub 2-0:1.0: state 7 ports 6 chg 0000 evt 0000
> [ 1.898625] usb usb1: uevent
> [ 1.898658] usb 1-0:1.0: uevent
> [ 1.898741] usb usb2: uevent
> [ 1.898770] usb 2-0:1.0: uevent
> [ 2.704274] ohci_hcd 0000:00:02.0: auto-stop root hub
> [ 2.704291] ohci_hcd 0000:00:04.0: auto-stop root hub
> [ 3.701025] hub 1-0:1.0: hub_suspend
> [ 3.701036] usb usb1: bus auto-suspend
> [ 3.701040] ohci_hcd 0000:00:02.0: suspend root hub
> [ 4.701021] hub 2-0:1.0: hub_suspend
> [ 4.701026] usb usb2: bus auto-suspend
> [ 4.701030] ohci_hcd 0000:00:04.0: suspend root hub
> [ 20.837458] PM: Starting manual resume from disk
> [ 20.837663] PM: Resume from partition 252:4
> [ 20.837666] PM: Checking hibernation image.
> [ 20.843590] PM: Resume from disk failed.
> [ 20.868643] kjournald starting. Commit interval 5 seconds
> [ 20.868657] EXT3-fs: mounted filesystem with journal data mode.
> [ 21.893126] udevd version 125 started
> [ 22.080025] usb usb1: uevent
> [ 22.080057] usb 1-0:1.0: uevent
> [ 22.080165] usb usb2: uevent
> [ 22.080201] usb 2-0:1.0: uevent
> [ 22.722118] ata1.00: configured for UDMA/133
> [ 22.722488] ata1: EH complete
> [ 24.735250] ata1.00: configured for UDMA/133
> [ 24.735459] ata1: EH complete
> [ 25.366518] EXT3-fs warning: maximal mount count reached, running e2fsck
> is recommended
> [ 25.372339] EXT3 FS on dm-1, internal journal
> [ 27.189661] Adding 2097144k swap on /dev/mapper/serveerstertje-swap.
> Priority:-1 extents:1 across:2097144k
> [ 28.212752] ADDRCONF(NETDEV_UP): eth1: link is not ready
> [ 28.803851] alloc irq_desc for 400 on node 0
> [ 28.803855] alloc kstat_irqs on node 0
> [ 29.668048] e1000e: eth1 NIC Link is Up 100 Mbps Full Duplex, Flow
> Control: RX/TX
> [ 29.668425] 0000:0a:00.0: eth1: 10/100 speed: disabling TSO
> [ 29.668900] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
> [ 29.705386] eth1: IPv6 duplicate address detected!
> [ 38.251258] xen_bridge: no IPv6 routers present
> [ 38.656011] vpn_bridge: no IPv6 routers present
> [ 39.788263] eth0: no IPv6 routers present
> [ 41.988912] kjournald starting. Commit interval 5 seconds
> [ 41.997209] EXT3 FS on dm-5, internal journal
> [ 41.997443] EXT3-fs: mounted filesystem with writeback data mode.
> [ 42.473830] kjournald starting. Commit interval 5 seconds
> [ 42.480037] EXT3 FS on dm-6, internal journal
> [ 42.480275] EXT3-fs: mounted filesystem with writeback data mode.
> [ 43.067747] kjournald starting. Commit interval 5 seconds
> [ 43.095366] EXT3 FS on dm-7, internal journal
> [ 43.095606] EXT3-fs: mounted filesystem with writeback data mode.
> [ 43.666641] kjournald starting. Commit interval 5 seconds
> [ 43.673986] EXT3 FS on dm-8, internal journal
> [ 43.674226] EXT3-fs: mounted filesystem with writeback data mode.
> [ 43.928734] kjournald starting. Commit interval 5 seconds
> [ 43.939992] EXT3 FS on dm-9, internal journal
> [ 43.940231] EXT3-fs: mounted filesystem with writeback data mode.
> [ 44.341971] kjournald starting. Commit interval 5 seconds
> [ 44.348307] EXT3 FS on dm-12, internal journal
> [ 44.348546] EXT3-fs: mounted filesystem with writeback data mode.
> [ 44.745845] kjournald starting. Commit interval 5 seconds
> [ 44.758586] EXT3 FS on dm-10, internal journal
> [ 44.758825] EXT3-fs: mounted filesystem with writeback data mode.
> [ 47.105770] alloc irq_desc for 399 on node 0
> [ 47.105775] alloc kstat_irqs on node 0
> [ 47.105827] xenbus_probe wake_waiting
> [ 47.106066] xenbus_probe wake_waiting
> [ 47.106280] alloc irq_desc for 398 on node 0
> [ 47.106283] alloc kstat_irqs on node 0
> [ 47.116283] XENBUS: Unable to read cpu state
> [ 47.116652] XENBUS: Unable to read cpu state
> [ 47.117214] xenbus_probe_devices backend
> [ 47.117575] xenbus_probe_devices failed xenbus_directory
> [ 47.117777] backend_probe_and_watch devices probed ok
> [ 47.118132] backend_probe_and_watch watch add ok ok
> [ 47.118333] backend_probe_and_watch all done
> [ 47.118532] xenbus_probe_devices device
> [ 47.118893] xenbus_probe_devices failed xenbus_directory
> [ 47.119010] frontend_probe_and_watch devices probed ok
> [ 47.119454] frontend_probe_and_watch watch add ok ok
> [ 47.119655] frontend_probe_and_watch all done
> [ 50.341321] alloc irq_desc for 397 on node 0
> [ 50.341326] alloc kstat_irqs on node 0
> [ 50.476859] alloc irq_desc for 396 on node 0
> [ 50.476864] alloc kstat_irqs on node 0
> [ 50.617462] device vif1.0 entered promiscuous mode
> [ 50.621072] xen_bridge: port 1(vif1.0) entering learning state
> [ 50.711244] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 50.722007] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 50.728114] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 50.728261] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 51.931951] blkback: ring-ref 2047, event-channel 4, protocol 1
> (x86_64-abi)
> [ 51.932204] alloc irq_desc for 395 on node 0
> [ 51.932208] alloc kstat_irqs on node 0
> [ 52.001665] blkback: ring-ref 2046, event-channel 5, protocol 1
> (x86_64-abi)
> [ 52.001903] alloc irq_desc for 394 on node 0
> [ 52.001907] alloc kstat_irqs on node 0
> [ 58.423669] hrtimer: interrupt took 150040611 ns
> [ 58.618305] alloc irq_desc for 393 on node 0
> [ 58.618310] alloc kstat_irqs on node 0
> [ 58.738885] frontend_changed: backend/vbd/1/2049: prepare for reconnect
> [ 58.746173] frontend_changed: backend/vbd/1/2050: prepare for reconnect
> [ 59.007040] blkback: ring-ref 8, event-channel 8, protocol 1 (x86_64-abi)
> [ 59.044192] blkback: ring-ref 9, event-channel 9, protocol 1 (x86_64-abi)
> [ 59.044435] alloc irq_desc for 392 on node 0
> [ 59.044439] alloc kstat_irqs on node 0
> [ 59.100025] alloc irq_desc for 391 on node 0
> [ 59.100030] alloc kstat_irqs on node 0
> [ 59.260041] device vif2.0 entered promiscuous mode
> [ 59.263991] xen_bridge: port 2(vif2.0) entering learning state
> [ 59.338545] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 59.338928] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 59.469723] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 59.470013] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 59.470013] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 59.574004] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 59.574261] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 59.574261] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 59.579822] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 59.580206] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 59.580261] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 59.580261] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 60.482940] blkback: ring-ref 2047, event-channel 4, protocol 1
> (x86_64-abi)
> [ 60.483199] alloc irq_desc for 390 on node 0
> [ 60.483203] alloc kstat_irqs on node 0
> [ 60.490152] blkback: ring-ref 2046, event-channel 5, protocol 1
> (x86_64-abi)
> [ 60.490396] alloc irq_desc for 389 on node 0
> [ 60.490399] alloc kstat_irqs on node 0
> [ 60.792258] vif1.0: no IPv6 routers present
> [ 61.919355] FW: New not syn:IN=eth0 OUT=
> MAC=00:1f:c6:8c:5e:b2:00:08:ae:10:46:60:08:00 SRC=65.54.189.152
> DST=88.159.69.34 LEN=49 TOS=0x00 PREC=0x00 TTL=111 ID=23646 DF PROTO=TCP
> SPT=1863 DPT=52714 WINDOW=64499 RES=0x00 ACK PSH URGP=0
> [ 61.920710] FW: INVALID IP PACKET: IN=eth0 OUT=
> MAC=00:1f:c6:8c:5e:b2:00:08:ae:10:46:60:08:00 SRC=65.54.189.152
> DST=88.159.69.34 LEN=40 TOS=0x00 PREC=0x00 TTL=111 ID=23696 DF PROTO=TCP
> SPT=1863 DPT=52714 WINDOW=64499 RES=0x00 ACK FIN URGP=0
> [ 62.794259] FW: INVALID IP PACKET: IN=eth0 OUT=
> MAC=00:1f:c6:8c:5e:b2:00:08:ae:10:46:60:08:00 SRC=65.54.189.152
> DST=88.159.69.34 LEN=49 TOS=0x00 PREC=0x00 TTL=111 ID=26819 DF PROTO=TCP
> SPT=1863 DPT=52714 WINDOW=64499 RES=0x00 ACK PSH FIN URGP=0
> [ 64.653763] FW: INVALID IP PACKET: IN=eth0 OUT=
> MAC=00:1f:c6:8c:5e:b2:00:08:ae:10:46:60:08:00 SRC=65.54.189.152
> DST=88.159.69.34 LEN=49 TOS=0x00 PREC=0x00 TTL=111 ID=1491 DF PROTO=TCP
> SPT=1863 DPT=52714 WINDOW=64499 RES=0x00 ACK PSH FIN URGP=0
> [ 65.652273] xen_bridge: port 1(vif1.0) entering forwarding state
> [ 66.537930] frontend_changed: backend/vbd/2/2049: prepare for reconnect
> [ 66.543421] frontend_changed: backend/vbd/2/2050: prepare for reconnect
> [ 66.761871] blkback: ring-ref 8, event-channel 8, protocol 1 (x86_64-abi)
> [ 66.780776] blkback: ring-ref 9, event-channel 9, protocol 1 (x86_64-abi)
> [ 66.781032] alloc irq_desc for 388 on node 0
> [ 66.781036] alloc kstat_irqs on node 0
> [ 66.807848] alloc irq_desc for 387 on node 0
> [ 66.807853] alloc kstat_irqs on node 0
> [ 67.127144] alloc irq_desc for 386 on node 0
> [ 67.127149] alloc kstat_irqs on node 0
> [ 67.368827] device vif3.0 entered promiscuous mode
> [ 67.372840] xen_bridge: port 3(vif3.0) entering learning state
> [ 67.419125] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 67.419261] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 67.419261] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 67.419261] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 67.429249] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 67.429262] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 67.429262] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 67.432290] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 67.432666] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 67.440309] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 67.440692] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 67.441069] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 67.441265] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 67.441265] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 67.457158] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 67.457258] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 67.457258] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 67.457258] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 67.457258] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 67.457258] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 67.762349] blkback: ring-ref 2047, event-channel 4, protocol 1
> (x86_64-abi)
> [ 67.762595] alloc irq_desc for 385 on node 0
> [ 67.762599] alloc kstat_irqs on node 0
> [ 67.771280] blkback: ring-ref 2046, event-channel 5, protocol 1
> (x86_64-abi)
> [ 67.771534] alloc irq_desc for 384 on node 0
> [ 67.771537] alloc kstat_irqs on node 0
> [ 68.262962] FW: INVALID IP PACKET: IN=eth0 OUT=
> MAC=00:1f:c6:8c:5e:b2:00:08:ae:10:46:60:08:00 SRC=65.54.189.152
> DST=88.159.69.34 LEN=49 TOS=0x00 PREC=0x00 TTL=111 ID=15997 DF PROTO=TCP
> SPT=1863 DPT=52714 WINDOW=64499 RES=0x00 ACK PSH FIN URGP=0
> [ 70.069258] vif2.0: no IPv6 routers present
> [ 74.253262] xen_bridge: port 2(vif2.0) entering forwarding state
> [ 74.292949] alloc irq_desc for 383 on node 0
> [ 74.292953] alloc kstat_irqs on node 0
> [ 74.547404] alloc irq_desc for 382 on node 0
> [ 74.547408] alloc kstat_irqs on node 0
> [ 74.803392] frontend_changed: backend/vbd/3/2049: prepare for reconnect
> [ 74.809588] frontend_changed: backend/vbd/3/2050: prepare for reconnect
> [ 74.928349] device vif4.0 entered promiscuous mode
> [ 74.934065] xen_bridge: port 4(vif4.0) entering learning state
> [ 74.979682] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 74.980071] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 74.980263] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 74.980263] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 74.980263] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 74.980263] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 74.986564] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 74.986953] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 74.987265] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 74.987265] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 74.987265] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 74.987265] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 74.987265] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 75.001069] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 75.001466] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 75.001855] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 75.002020] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 75.002020] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 75.002020] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 75.002020] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 75.016597] blkback: ring-ref 8, event-channel 8, protocol 1 (x86_64-abi)
> [ 75.021583] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 75.021968] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 75.022009] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 75.022009] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 75.022009] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 75.022009] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 75.022009] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 75.022009] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 75.033560] blkback: ring-ref 9, event-channel 9, protocol 1 (x86_64-abi)
> [ 75.052021] alloc irq_desc for 381 on node 0
> [ 75.052026] alloc kstat_irqs on node 0
> [ 75.481915] FW: INVALID IP PACKET: IN=eth0 OUT=
> MAC=00:1f:c6:8c:5e:b2:00:08:ae:10:46:60:08:00 SRC=65.54.189.152
> DST=88.159.69.34 LEN=49 TOS=0x00 PREC=0x00 TTL=111 ID=12021 DF PROTO=TCP
> SPT=1863 DPT=52714 WINDOW=64499 RES=0x00 ACK PSH FIN URGP=0
> [ 76.011426] blkback: ring-ref 2047, event-channel 4, protocol 1
> (x86_64-abi)
> [ 76.011667] alloc irq_desc for 380 on node 0
> [ 76.011671] alloc kstat_irqs on node 0
> [ 76.021613] blkback: ring-ref 2046, event-channel 5, protocol 1
> (x86_64-abi)
> [ 76.021833] alloc irq_desc for 379 on node 0
> [ 76.021836] alloc kstat_irqs on node 0
> [ 77.680261] vif3.0: no IPv6 routers present
> [ 81.619388] FW: BLOCKED IGMP: IN=eth0 OUT=
> MAC=01:00:5e:00:00:01:00:08:ae:04:2e:43:08:00 SRC=88.159.81.254 DST=224.0.0.1
> LEN=32 TOS=0x00 PREC=0xC0 TTL=1 ID=26699 PROTO=2
> [ 82.355268] xen_bridge: port 3(vif3.0) entering forwarding state
> [ 82.396835] alloc irq_desc for 378 on node 0
> [ 82.396840] alloc kstat_irqs on node 0
> [ 82.573756] alloc irq_desc for 377 on node 0
> [ 82.573760] alloc kstat_irqs on node 0
> [ 82.787914] device vif5.0 entered promiscuous mode
> [ 82.792233] xen_bridge: port 5(vif5.0) entering learning state
> [ 82.851737] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 82.852123] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 82.852263] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 82.852263] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 82.852263] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 82.852263] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 82.852263] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 82.852263] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 82.860459] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 82.860851] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 82.861014] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 82.861014] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 82.861014] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 82.861014] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 82.861014] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 82.861014] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 82.861014] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 82.872490] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 82.872888] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 82.872893] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 82.872898] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 82.872902] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 82.872908] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 82.872913] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 82.872918] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 82.872925] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 82.887229] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 82.887261] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 82.887261] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 82.887261] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 82.887261] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 82.897903] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 82.897908] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 82.897912] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 82.897916] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 82.897920] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 83.224292] frontend_changed: backend/vbd/4/2049: prepare for reconnect
> [ 83.230912] frontend_changed: backend/vbd/4/2050: prepare for reconnect
> [ 83.424720] blkback: ring-ref 8, event-channel 8, protocol 1 (x86_64-abi)
> [ 83.439902] blkback: ring-ref 9, event-channel 9, protocol 1 (x86_64-abi)
> [ 83.455606] alloc irq_desc for 376 on node 0
> [ 83.455611] alloc kstat_irqs on node 0
> [ 84.137314] blkback: ring-ref 2047, event-channel 4, protocol 1
> (x86_64-abi)
> [ 84.137559] alloc irq_desc for 375 on node 0
> [ 84.137563] alloc kstat_irqs on node 0
> [ 84.172266] blkback: ring-ref 2046, event-channel 5, protocol 1
> (x86_64-abi)
> [ 84.172512] alloc irq_desc for 374 on node 0
> [ 84.172516] alloc kstat_irqs on node 0
> [ 85.775016] vif4.0: no IPv6 routers present
> [ 89.919164] FW: INVALID IP PACKET: IN=eth0 OUT=
> MAC=00:1f:c6:8c:5e:b2:00:08:ae:10:46:60:08:00 SRC=65.54.189.152
> DST=88.159.69.34 LEN=49 TOS=0x00 PREC=0x00 TTL=111 ID=4967 DF PROTO=TCP
> SPT=1863 DPT=52714 WINDOW=64499 RES=0x00 ACK PSH FIN URGP=0
> [ 89.934010] xen_bridge: port 4(vif4.0) entering forwarding state
> [ 91.434098] alloc irq_desc for 373 on node 0
> [ 91.434103] alloc kstat_irqs on node 0
> [ 91.721333] alloc irq_desc for 372 on node 0
> [ 91.721338] alloc kstat_irqs on node 0
> [ 91.975449] frontend_changed: backend/vbd/5/2049: prepare for reconnect
> [ 92.031877] device vif6.0 entered promiscuous mode
> [ 92.037331] frontend_changed: backend/vbd/5/2050: prepare for reconnect
> [ 92.065832] xen_bridge: port 6(vif6.0) entering learning state
> [ 92.102922] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 92.103261] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 92.103261] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 92.103261] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 92.103261] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 92.103261] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 92.103261] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 92.103261] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 92.103261] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 92.103261] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 92.113148] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 92.113260] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 92.113260] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 92.113260] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 92.113260] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 92.113260] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 92.113260] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 92.113260] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 92.113260] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 92.113260] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 92.113260] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 92.124500] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 92.124886] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 92.125262] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 92.125262] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 92.125262] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 92.125262] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 92.125262] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 92.125262] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 92.181061] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 92.182735] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 92.183113] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 92.190121] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 92.190263] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 92.190263] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 92.190263] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 92.190263] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 92.190263] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 92.190263] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 92.190263] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 92.190263] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 92.190263] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 92.190263] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 92.190263] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 92.267655] blkback: ring-ref 8, event-channel 8, protocol 1 (x86_64-abi)
> [ 92.294819] blkback: ring-ref 9, event-channel 9, protocol 1 (x86_64-abi)
> [ 92.309923] alloc irq_desc for 371 on node 0
> [ 92.309928] alloc kstat_irqs on node 0
> [ 92.496238] blkback: ring-ref 2047, event-channel 4, protocol 1
> (x86_64-abi)
> [ 92.496568] alloc irq_desc for 370 on node 0
> [ 92.496572] alloc kstat_irqs on node 0
> [ 93.075455] blkback: ring-ref 2046, event-channel 5, protocol 1
> (x86_64-abi)
> [ 93.075705] alloc irq_desc for 369 on node 0
> [ 93.075709] alloc kstat_irqs on node 0
> [ 93.432260] vif5.0: no IPv6 routers present
> [ 97.813314] xen_bridge: port 5(vif5.0) entering forwarding state
> [ 99.292251] alloc irq_desc for 368 on node 0
> [ 99.292256] alloc kstat_irqs on node 0
> [ 99.556575] pciback pci-7-0: allocated pdev @ 0xffff88002a5f7700
> [ 99.559269] pciback pci-7-0: getting be setup
> [ 99.560086] pciback pci-7-0: exporting dom 0 bus 0 slot 7 func 0
> [ 99.561233] pciback 0000:00:07.0: registering for 7
> [ 99.562918] pciback pci-7-0: Publishing pci roots
> [ 99.563635] pciback pci-7-0: writing root 0 at 0000:00
> [ 99.581964] pciback pci-7-0: fe state changed 1
> [ 99.623530] alloc irq_desc for 367 on node 0
> [ 99.623535] alloc kstat_irqs on node 0
> [ 99.729821] device vif7.0 entered promiscuous mode
> [ 99.734171] xen_bridge: port 7(vif7.0) entering learning state
> [ 99.842416] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 99.842801] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 99.843177] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 99.843262] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 99.843262] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 99.843262] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 99.843262] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 99.843262] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 99.843262] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 99.843262] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 99.843262] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 99.843262] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 99.914574] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 99.914958] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 99.915016] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 99.915016] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 99.923002] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 99.923002] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 99.923002] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 99.923002] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 99.923002] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 99.923002] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 99.923002] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 99.923002] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 99.923002] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 99.985682] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 99.986011] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 99.986011] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 99.986011] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 99.986011] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 99.986011] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 99.986011] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 99.986011] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 99.986011] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 99.986011] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 99.986011] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 99.986011] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 99.986011] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 100.025636] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 100.026013] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 100.026013] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 100.026013] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 100.026013] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 100.026013] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 100.026013] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 100.026013] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 100.026013] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 100.026013] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 100.026013] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 100.026013] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 100.026013] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 100.026013] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 100.334997] blkback: ring-ref 2047, event-channel 4, protocol 1
> (x86_64-abi)
> [ 100.335244] alloc irq_desc for 366 on node 0
> [ 100.335248] alloc kstat_irqs on node 0
> [ 100.342110] pciback pci-7-0: fe state changed 3
> [ 100.342928] pciback pci-7-0: Reading frontend config
> [ 100.345333] pciback pci-7-0: Attaching to frontend resources -
> gnt_ref=2046 evtchn=5
> [ 100.345375] alloc irq_desc for 365 on node 0
> [ 100.345379] alloc kstat_irqs on node 0
> [ 100.345411] pciback pci-7-0: Attached!
> [ 100.345414] pciback pci-7-0: Connecting...
> [ 100.346853] pciback pci-7-0: Connected? 0
> [ 100.352994] pciback pci-7-0: fe state changed 4
> [ 100.358167] blkback: ring-ref 2045, event-channel 6, protocol 1
> (x86_64-abi)
> [ 100.358423] alloc irq_desc for 364 on node 0
> [ 100.358427] alloc kstat_irqs on node 0
> [ 100.571764] frontend_changed: backend/vbd/6/2049: prepare for reconnect
> [ 100.580161] frontend_changed: backend/vbd/6/2050: prepare for reconnect
> [ 100.793806] blkback: ring-ref 8, event-channel 8, protocol 1 (x86_64-abi)
> [ 100.801520] blkback: ring-ref 9, event-channel 9, protocol 1 (x86_64-abi)
> [ 100.818516] alloc irq_desc for 363 on node 0
> [ 100.818521] alloc kstat_irqs on node 0
> [ 102.313261] vif6.0: no IPv6 routers present
> [ 107.064264] xen_bridge: port 6(vif6.0) entering forwarding state
> [ 107.536991] frontend_changed: backend/vbd/7/2049: prepare for reconnect
> [ 107.555285] frontend_changed: backend/vbd/7/2050: prepare for reconnect
> [ 107.776508] blkback: ring-ref 8, event-channel 8, protocol 1 (x86_64-abi)
> [ 107.798954] blkback: ring-ref 9, event-channel 9, protocol 1 (x86_64-abi)
> [ 107.916627] alloc irq_desc for 362 on node 0
> [ 107.916632] alloc kstat_irqs on node 0
> [ 109.973011] vif7.0: no IPv6 routers present
> [ 110.176968] alloc irq_desc for 361 on node 0
> [ 110.176973] alloc kstat_irqs on node 0
> [ 110.373960] alloc irq_desc for 360 on node 0
> [ 110.373965] alloc kstat_irqs on node 0
> [ 110.713492] device vif8.0 entered promiscuous mode
> [ 110.717994] xen_bridge: port 8(vif8.0) entering learning state
> [ 110.767680] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 110.768065] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 110.768264] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 110.768264] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 110.768264] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 110.768264] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 110.768264] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 110.768264] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 110.768264] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 110.768264] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 110.768264] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 110.768264] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 110.768264] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 110.768264] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 110.778856] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 110.779241] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 110.779262] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 110.779262] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 110.779262] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 110.779262] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 110.779262] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 110.779262] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 110.779262] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 110.779262] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 110.779262] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 110.779262] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 110.779262] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 110.779262] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 110.779262] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 110.791443] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 110.791829] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 110.792011] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 110.792011] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 110.792011] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 110.792011] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 110.792011] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 110.792011] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 110.792011] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 110.792011] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 110.792011] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 110.792011] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 110.792011] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 110.792011] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 110.792011] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 110.804736] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 110.805014] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 110.805014] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 110.805014] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 110.805014] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 110.805014] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 110.805014] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 110.805014] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 110.805014] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 110.805014] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 110.805014] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 110.805014] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 110.805014] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 110.805014] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 110.805014] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 110.805014] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 111.888306] blkback: ring-ref 2047, event-channel 4, protocol 1
> (x86_64-abi)
> [ 111.888555] alloc irq_desc for 359 on node 0
> [ 111.888559] alloc kstat_irqs on node 0
> [ 111.900134] blkback: ring-ref 2046, event-channel 5, protocol 1
> (x86_64-abi)
> [ 111.900383] alloc irq_desc for 358 on node 0
> [ 111.900386] alloc kstat_irqs on node 0
> [ 114.735100] xen_bridge: port 7(vif7.0) entering forwarding state
> [ 119.762753] alloc irq_desc for 357 on node 0
> [ 119.762758] alloc kstat_irqs on node 0
> [ 120.464663] alloc irq_desc for 356 on node 0
> [ 120.464668] alloc kstat_irqs on node 0
> [ 120.704717] frontend_changed: backend/vbd/8/2049: prepare for reconnect
> [ 120.716018] device vif9.0 entered promiscuous mode
> [ 120.720906] xen_bridge: port 9(vif9.0) entering learning state
> [ 120.727886] frontend_changed: backend/vbd/8/2050: prepare for reconnect
> [ 120.771977] vif8.0: no IPv6 routers present
> [ 120.818215] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 120.818257] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 120.818257] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 120.818257] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 120.818257] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 120.818257] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 120.818257] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 120.818257] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 120.818257] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 120.818257] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 120.818257] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 120.818257] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 120.818257] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 120.818257] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 120.818257] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 120.818257] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 120.840295] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 120.840678] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 120.841053] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 120.841264] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 120.841264] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 120.841264] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 120.841264] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 120.841264] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 120.841264] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 120.841264] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 120.841264] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 120.841264] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 120.841264] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 120.841264] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 120.841264] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 120.841264] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 120.841264] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 120.857031] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 120.857259] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 120.857259] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 120.857259] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 120.857259] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 120.857259] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 120.899665] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 120.900044] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 120.900293] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 120.900293] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 120.900293] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 120.900293] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 120.900293] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 120.900293] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 120.900293] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 120.900293] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 120.900293] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 120.919195] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 120.919262] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 120.919262] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 120.919262] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 120.919262] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 120.919262] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 120.919262] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 120.919262] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 120.919262] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 120.919262] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 120.919262] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 120.919262] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 120.919262] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 120.919262] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 120.919262] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 120.919262] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 120.919262] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 120.919262] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 121.017352] blkback: ring-ref 8, event-channel 8, protocol 1 (x86_64-abi)
> [ 121.048196] blkback: ring-ref 9, event-channel 9, protocol 1 (x86_64-abi)
> [ 121.085720] alloc irq_desc for 355 on node 0
> [ 121.085726] alloc kstat_irqs on node 0
> [ 121.246157] blkback: ring-ref 2047, event-channel 4, protocol 1
> (x86_64-abi)
> [ 121.246414] alloc irq_desc for 354 on node 0
> [ 121.246417] alloc kstat_irqs on node 0
> [ 121.296090] blkback: ring-ref 2046, event-channel 5, protocol 1
> (x86_64-abi)
> [ 121.296340] alloc irq_desc for 353 on node 0
> [ 121.296344] alloc kstat_irqs on node 0
> [ 125.717014] xen_bridge: port 8(vif8.0) entering forwarding state
> [ 129.950510] FW: INVALID IP PACKET: IN=xen_bridge OUT= PHYSIN=vif3.0
> MAC=fe:ff:ff:ff:ff:ff:00:16:3e:82:3f:2f:08:00 SRC=192.168.1.7 DST=192.168.1.1
> LEN=40 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=TCP SPT=989 DPT=6996 WINDOW=0
> RES=0x00 RST URGP=0
> [ 129.974659] frontend_changed: backend/vbd/9/2049: prepare for reconnect
> [ 129.993095] frontend_changed: backend/vbd/9/2050: prepare for reconnect
> [ 130.634600] blkback: ring-ref 8, event-channel 8, protocol 1 (x86_64-abi)
> [ 130.646172] blkback: ring-ref 9, event-channel 9, protocol 1 (x86_64-abi)
> [ 131.215258] vif9.0: no IPv6 routers present
> [ 133.677296] alloc irq_desc for 352 on node 0
> [ 133.677301] alloc kstat_irqs on node 0
> [ 134.338167] pciback 0000:01:08.0: enabling permissive mode configuration
> space accesses!
> [ 134.338255] pciback 0000:01:08.0: permissive mode is potentially unsafe!
> [ 134.365796] device vif10.0 entered promiscuous mode
> [ 134.375361] xen_bridge: port 10(vif10.0) entering learning state
> [ 134.429724] pciback 0000:01:08.1: enabling permissive mode configuration
> space accesses!
> [ 134.430098] pciback 0000:01:08.1: permissive mode is potentially unsafe!
> [ 134.466357] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 134.466740] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 134.467116] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 134.467262] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 134.467262] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 134.467262] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 134.467262] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 134.467262] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 134.467262] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 134.467262] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 134.467262] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 134.467262] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 134.467262] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 134.467262] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 134.467262] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 134.485382] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 134.485780] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 134.486154] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 134.507910] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 134.508262] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 134.508262] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 134.508262] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 134.508262] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 134.508262] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 134.508262] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 134.508262] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 134.508262] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 134.508262] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 134.508262] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 134.508262] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 134.508262] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 134.508262] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 134.508262] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 134.508262] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 134.508262] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 134.508262] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 134.508262] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 134.523813] pciback 0000:01:08.2: enabling permissive mode configuration
> space accesses!
> [ 134.524197] pciback 0000:01:08.2: permissive mode is potentially unsafe!
> [ 134.573734] pciback 0000:09:01.0: enabling permissive mode configuration
> space accesses!
> [ 134.574113] pciback 0000:09:01.0: permissive mode is potentially unsafe!
> [ 134.596758] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 134.597014] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 134.597014] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 134.597014] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 134.597014] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 134.597014] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 134.597014] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 134.597014] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 134.597014] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 134.597014] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 134.597014] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 134.597014] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 134.597014] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 134.597014] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 134.597014] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 134.597014] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 134.597014] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 134.597014] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 134.597014] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 134.606370] pciback 0000:09:01.1: enabling permissive mode configuration
> space accesses!
> [ 134.606758] pciback 0000:09:01.1: permissive mode is potentially unsafe!
> [ 134.619792] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 134.620020] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 134.620020] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 134.620020] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 134.620020] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 134.620020] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 134.620020] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 134.620020] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 134.620020] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 134.620020] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 134.620020] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 134.620020] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 134.620020] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 134.620020] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 134.620020] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 134.620020] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 134.620020] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 134.620020] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 134.620020] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 134.620020] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 134.633345] pciback 0000:09:01.2: enabling permissive mode configuration
> space accesses!
> [ 134.633349] pciback 0000:09:01.2: permissive mode is potentially unsafe!
> [ 134.713746] pciback pci-10-0: allocated pdev @ 0xffff880008d87480
> [ 134.720592] pciback pci-10-0: getting be setup
> [ 134.722235] pciback pci-10-0: exporting dom 0 bus 1 slot 8 func 0
> [ 134.725799] pciback 0000:01:08.0: registering for 10
> [ 134.731660] pciback pci-10-0: exporting dom 0 bus 1 slot 8 func 1
> [ 134.732811] pciback 0000:01:08.1: registering for 10
> [ 134.734365] pciback pci-10-0: exporting dom 0 bus 1 slot 8 func 2
> [ 134.735767] pciback 0000:01:08.2: registering for 10
> [ 134.738552] pciback pci-10-0: exporting dom 0 bus 9 slot 1 func 0
> [ 134.740343] pciback 0000:09:01.0: registering for 10
> [ 134.743345] pciback pci-10-0: exporting dom 0 bus 9 slot 1 func 1
> [ 134.744602] pciback 0000:09:01.1: registering for 10
> [ 134.754533] pciback pci-10-0: exporting dom 0 bus 9 slot 1 func 2
> [ 134.757864] pciback 0000:09:01.2: registering for 10
> [ 134.759812] pciback pci-10-0: Publishing pci roots
> [ 134.760530] pciback pci-10-0: writing root 0 at 0000:01
> [ 134.764515] pciback pci-10-0: Publishing pci roots
> [ 134.765515] pciback pci-10-0: Publishing pci roots
> [ 134.767120] pciback pci-10-0: Publishing pci roots
> [ 134.768520] pciback pci-10-0: writing root 1 at 0000:09
> [ 134.771361] pciback pci-10-0: Publishing pci roots
> [ 134.773809] pciback pci-10-0: Publishing pci roots
> [ 134.813514] alloc irq_desc for 351 on node 0
> [ 134.813519] alloc kstat_irqs on node 0
> [ 134.816531] pciback pci-10-0: fe state changed 1
> [ 135.721261] xen_bridge: port 9(vif9.0) entering forwarding state
> [ 136.239287] blkback: ring-ref 2047, event-channel 4, protocol 1
> (x86_64-abi)
> [ 136.239542] alloc irq_desc for 350 on node 0
> [ 136.239546] alloc kstat_irqs on node 0
> [ 139.333619] pciback pci-10-0: fe state changed 3
> [ 139.338747] pciback pci-10-0: Reading frontend config
> [ 139.339527] pciback pci-10-0: Attaching to frontend resources -
> gnt_ref=2046 evtchn=5
> [ 139.339568] alloc irq_desc for 349 on node 0
> [ 139.339572] alloc kstat_irqs on node 0
> [ 139.339600] pciback pci-10-0: Attached!
> [ 139.339603] pciback pci-10-0: Connecting...
> [ 139.342463] pciback pci-10-0: Connected? 0
> [ 139.345764] pciback pci-10-0: fe state changed 4
> [ 139.350794] blkback: ring-ref 2045, event-channel 6, protocol 1
> (x86_64-abi)
> [ 139.351178] alloc irq_desc for 348 on node 0
> [ 139.351182] alloc kstat_irqs on node 0
> [ 139.362921] blkback: ring-ref 2044, event-channel 7, protocol 1
> (x86_64-abi)
> [ 139.363195] alloc irq_desc for 347 on node 0
> [ 139.363199] alloc kstat_irqs on node 0
> [ 145.229260] vif10.0: no IPv6 routers present
> [ 147.291055] frontend_changed: backend/vbd/10/2049: prepare for reconnect
> [ 147.337119] frontend_changed: backend/vbd/10/2050: prepare for reconnect
> [ 147.387601] frontend_changed: backend/vbd/10/2065: prepare for reconnect
> [ 147.842437] blkback: ring-ref 8, event-channel 12, protocol 1 (x86_64-abi)
> [ 147.850524] blkback: ring-ref 9, event-channel 13, protocol 1 (x86_64-abi)
> [ 147.860941] blkback: ring-ref 10, event-channel 14, protocol 1 (x86_64-abi)
> [ 147.861213] alloc irq_desc for 346 on node 0
> [ 147.861217] alloc kstat_irqs on node 0
> [ 147.881780] alloc irq_desc for 345 on node 0
> [ 147.881784] alloc kstat_irqs on node 0
> [ 149.375262] xen_bridge: port 10(vif10.0) entering forwarding state
> [ 150.079932] alloc irq_desc for 344 on node 0
> [ 150.079937] alloc kstat_irqs on node 0
> [ 150.258836] alloc irq_desc for 343 on node 0
> [ 150.258840] alloc kstat_irqs on node 0
> [ 151.221592] device vif11.0 entered promiscuous mode
> [ 151.225757] xen_bridge: port 11(vif11.0) entering learning state
> [ 153.780693] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 153.781013] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 153.781013] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 153.781013] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 153.781013] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 153.781013] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 153.781013] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 153.781013] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 153.781013] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 153.781013] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 153.781013] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 153.781013] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 153.781013] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 153.781013] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 153.781013] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 153.781013] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 153.781013] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 153.781013] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 153.781013] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 153.781013] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 153.803508] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 153.803893] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 153.804015] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 153.804015] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 153.804015] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 153.804015] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 153.804015] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 153.804015] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 153.804015] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 153.804015] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 153.804015] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 153.804015] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 153.804015] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 153.804015] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 153.804015] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 153.804015] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 153.804015] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 153.804015] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 153.804015] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 153.804015] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 153.804015] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 153.830471] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 153.830862] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 153.831015] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 153.831015] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 153.831015] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 153.831015] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 153.831015] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 153.831015] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 153.831015] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 153.831015] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 153.831015] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 153.831015] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 153.831015] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 153.831015] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 153.831015] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 153.831015] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 153.831015] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 153.831015] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 153.831015] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 153.831015] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 153.831015] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 153.846573] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 153.846958] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 153.847014] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 153.847014] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 153.847014] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 153.847014] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 153.847014] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 153.847014] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 153.847014] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 153.847014] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 153.847014] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 153.847014] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 153.847014] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 153.847014] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 153.847014] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 153.847014] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 153.847014] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 153.847014] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 153.847014] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 153.847014] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 153.847014] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 153.847014] physdev match: using --physdev-out in the OUTPUT, FORWARD and
> POSTROUTING chains for non-bridged traffic is not supported anymore.
> [ 155.154898] blkback: ring-ref 2047, event-channel 4, protocol 1
> (x86_64-abi)
> [ 155.155171] alloc irq_desc for 342 on node 0
> [ 155.155175] alloc kstat_irqs on node 0
> [ 155.166747] blkback: ring-ref 2046, event-channel 5, protocol 1
> (x86_64-abi)
> [ 155.167022] alloc irq_desc for 341 on node 0
> [ 155.167025] alloc kstat_irqs on node 0
> [ 162.103011] vif11.0: no IPv6 routers present
> [ 163.260208] frontend_changed: backend/vbd/11/2049: prepare for reconnect
> [ 163.270227] frontend_changed: backend/vbd/11/2050: prepare for reconnect
> [ 163.486538] blkback: ring-ref 8, event-channel 8, protocol 1 (x86_64-abi)
> [ 163.498054] blkback: ring-ref 9, event-channel 9, protocol 1 (x86_64-abi)
> [ 163.522073] alloc irq_desc for 340 on node 0
> [ 163.522078] alloc kstat_irqs on node 0
> [ 166.225013] xen_bridge: port 11(vif11.0) entering forwarding state
> [ 168.242471] FW: INVALID IP PACKET: IN=eth0 OUT=
> MAC=00:1f:c6:8c:5e:b2:00:08:ae:10:46:60:08:00 SRC=70.42.241.107
> DST=88.159.69.34 LEN=40 TOS=0x00 PREC=0x00 TTL=54 ID=0 DF PROTO=TCP SPT=80
> DPT=57639 WINDOW=1716 RES=0x00 RST URGP=0
> [ 168.246168] FW: INVALID IP PACKET: IN=eth0 OUT=
> MAC=00:1f:c6:8c:5e:b2:00:08:ae:10:46:60:08:00 SRC=70.42.241.107
> DST=88.159.69.34 LEN=68 TOS=0x00 PREC=0x00 TTL=245 ID=28573 PROTO=ICMP TYPE=3
> CODE=10 [SRC=88.159.69.34 DST=70.42.241.107 LEN=40 TOS=0x00 PREC=0x00 TTL=64
> ID=0 DF PROTO=TCP SPT=57639 DPT=80 WINDOW=108 RES=0x00 RST URGP=0 ]
> [ 170.240148] FW: INVALID IP PACKET: IN=eth0 OUT=
> MAC=00:1f:c6:8c:5e:b2:00:08:ae:10:46:60:08:00 SRC=70.42.241.107
> DST=88.159.69.34 LEN=40 TOS=0x00 PREC=0x00 TTL=54 ID=0 DF PROTO=TCP SPT=80
> DPT=57640 WINDOW=1716 RES=0x00 RST URGP=0
> [ 170.241477] FW: INVALID IP PACKET: IN=eth0 OUT=
> MAC=00:1f:c6:8c:5e:b2:00:08:ae:10:46:60:08:00 SRC=70.42.241.107
> DST=88.159.69.34 LEN=68 TOS=0x00 PREC=0x00 TTL=245 ID=28574 PROTO=ICMP TYPE=3
> CODE=10 [SRC=88.159.69.34 DST=70.42.241.107 LEN=40 TOS=0x00 PREC=0x00 TTL=64
> ID=0 DF PROTO=TCP SPT=57640 DPT=80 WINDOW=108 RES=0x00 RST URGP=0 ]
> [ 196.241665] FW: INVALID IP PACKET: IN=eth0 OUT=
> MAC=00:1f:c6:8c:5e:b2:00:08:ae:10:46:60:08:00 SRC=70.42.241.107
> DST=88.159.69.34 LEN=40 TOS=0x00 PREC=0x00 TTL=54 ID=0 DF PROTO=TCP SPT=80
> DPT=57641 WINDOW=1716 RES=0x00 RST URGP=0
> [ 196.243966] FW: INVALID IP PACKET: IN=eth0 OUT=
> MAC=00:1f:c6:8c:5e:b2:00:08:ae:10:46:60:08:00 SRC=70.42.241.107
> DST=88.159.69.34 LEN=68 TOS=0x00 PREC=0x00 TTL=245 ID=28575 PROTO=ICMP TYPE=3
> CODE=10 [SRC=88.159.69.34 DST=70.42.241.107 LEN=40 TOS=0x00 PREC=0x00 TTL=64
> ID=0 DF PROTO=TCP SPT=57641 DPT=80 WINDOW=108 RES=0x00 RST URGP=0 ]
> [ 206.614583] FW: BLOCKED IGMP: IN=eth0 OUT=
> MAC=01:00:5e:00:00:01:00:08:ae:04:2e:43:08:00 SRC=88.159.81.254 DST=224.0.0.1
> LEN=32 TOS=0x00 PREC=0xC0 TTL=1 ID=27052 PROTO=2
> [ 306.233574] FW: INVALID IP PACKET: IN=eth0 OUT=
> MAC=00:1f:c6:8c:5e:b2:00:08:ae:10:46:60:08:00 SRC=70.42.241.107
> DST=88.159.69.34 LEN=40 TOS=0x00 PREC=0x00 TTL=54 ID=0 DF PROTO=TCP SPT=80
> DPT=50070 WINDOW=1716 RES=0x00 RST URGP=0
> [ 306.235056] FW: INVALID IP PACKET: IN=eth0 OUT=
> MAC=00:1f:c6:8c:5e:b2:00:08:ae:10:46:60:08:00 SRC=70.42.241.107
> DST=88.159.69.34 LEN=68 TOS=0x00 PREC=0x00 TTL=245 ID=28576 PROTO=ICMP TYPE=3
> CODE=10 [SRC=88.159.69.34 DST=70.42.241.107 LEN=40 TOS=0x00 PREC=0x00 TTL=64
> ID=0 DF PROTO=TCP SPT=50070 DPT=80 WINDOW=108 RES=0x00 RST URGP=0 ]
> [ 331.618549] FW: BLOCKED IGMP: IN=eth0 OUT=
> MAC=01:00:5e:00:00:01:00:08:ae:04:2e:43:08:00 SRC=88.159.81.254 DST=224.0.0.1
> LEN=32 TOS=0x00 PREC=0xC0 TTL=1 ID=27439 PROTO=2
> [ 368.230109] FW: INVALID IP PACKET: IN=eth0 OUT=
> MAC=00:1f:c6:8c:5e:b2:00:08:ae:10:46:60:08:00 SRC=70.42.241.107
> DST=88.159.69.34 LEN=40 TOS=0x00 PREC=0x00 TTL=54 ID=0 DF PROTO=TCP SPT=80
> DPT=50072 WINDOW=1716 RES=0x00 RST URGP=0
> [ 368.231591] FW: INVALID IP PACKET: IN=eth0 OUT=
> MAC=00:1f:c6:8c:5e:b2:00:08:ae:10:46:60:08:00 SRC=70.42.241.107
> DST=88.159.69.34 LEN=68 TOS=0x00 PREC=0x00 TTL=245 ID=28577 PROTO=ICMP TYPE=3
> CODE=10 [SRC=88.159.69.34 DST=70.42.241.107 LEN=40 TOS=0x00 PREC=0x00 TTL=64
> ID=0 DF PROTO=TCP SPT=50072 DPT=80 WINDOW=108 RES=0x00 RST URGP=0 ]
> [ 456.620259] FW: BLOCKED IGMP: IN=eth0 OUT=
> MAC=01:00:5e:00:00:01:00:08:ae:04:2e:43:08:00 SRC=88.159.81.254 DST=224.0.0.1
> LEN=32 TOS=0x00 PREC=0xC0 TTL=1 ID=27792 PROTO=2
> [ 581.625771] FW: BLOCKED IGMP: IN=eth0 OUT=
> MAC=01:00:5e:00:00:01:00:08:ae:04:2e:43:08:00 SRC=88.159.81.254 DST=224.0.0.1
> LEN=32 TOS=0x00 PREC=0xC0 TTL=1 ID=28143 PROTO=2
> 00:00.0 RAM memory [0500]: nVidia Corporation MCP78S [GeForce 8200] Memory
> Controller [10de:0754] (rev a2)
> Subsystem: ASUSTeK Computer Inc. Device [1043:82e8]
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
> <MAbort- >SERR- <PERR- INTx-
> Latency: 0
> Capabilities: [94] HyperTransport: #1a
> Capabilities: [60] HyperTransport: Retry Mode
> Capabilities: [44] HyperTransport: Slave or Primary Interface
> Command: BaseUnitID=0 UnitCnt=0 MastHost- DefDir- DUL-
> Link Control 0: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO-
> <CRCErr=0 IsocEn- LSEn- ExtCTL- 64b-
> Link Config 0: MLWI=16bit DwFcIn- MLWO=16bit DwFcOut- LWI=16bit
> DwFcInEn- LWO=16bit DwFcOutEn-
> Link Control 1: CFlE- CST- CFE- <LkFail+ Init- EOC+ TXO+
> <CRCErr=0 IsocEn- LSEn- ExtCTL- 64b-
> Link Config 1: MLWI=8bit DwFcIn- MLWO=8bit DwFcOut- LWI=8bit
> DwFcInEn- LWO=8bit DwFcOutEn-
> Revision ID: 3.00
> Link Frequency 0: 1.0GHz
> Link Error 0: <Prot+ <Ovfl- <EOC- CTLTm-
> Link Frequency Capability 0: 200MHz+ 300MHz- 400MHz+ 500MHz-
> 600MHz+ 800MHz+ 1.0GHz+ 1.2GHz+ 1.4GHz- 1.6GHz- Vend-
> Feature Capability: IsocFC+ LDTSTOP+ CRCTM- ECTLT- 64bA- UIDRD+
> Link Frequency 1: 200MHz
> Link Error 1: <Prot- <Ovfl- <EOC- CTLTm-
> Link Frequency Capability 1: 200MHz- 300MHz- 400MHz- 500MHz-
> 600MHz- 800MHz- 1.0GHz- 1.2GHz- 1.4GHz- 1.6GHz- Vend-
> Error Handling: PFlE- OFlE- PFE- OFE- EOCFE- RFE- CRCFE-
> SERRFE- CF- RE- PNFE- ONFE- EOCNFE- RNFE- CRCNFE- SERRNFE-
> Prefetchable memory behind bridge Upper: 00-00
> Bus Number: 00
> Capabilities: [d0] HyperTransport: #1c
>
> 00:01.0 ISA bridge [0601]: nVidia Corporation Device [10de:075d] (rev a2)
> Subsystem: ASUSTeK Computer Inc. Device [1043:82e8]
> Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B- DisINTx-
> Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
> <MAbort- >SERR- <PERR- INTx-
> Latency: 0
>
> 00:01.1 SMBus [0c05]: nVidia Corporation MCP78S [GeForce 8200] SMBus
> [10de:0752] (rev a1)
> Subsystem: ASUSTeK Computer Inc. Device [1043:82e8]
> Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
> <MAbort- >SERR- <PERR- INTx-
> Interrupt: pin A routed to IRQ 255
> Region 0: I/O ports at ff00 [size=64]
> Region 4: I/O ports at 1c00 [size=64]
> Region 5: I/O ports at 1c40 [size=64]
> Capabilities: [44] Power Management version 2
> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
> PME(D0-,D1-,D2-,D3hot+,D3cold+)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>
> 00:01.2 RAM memory [0500]: nVidia Corporation MCP78S [GeForce 8200] Memory
> Controller [10de:0751] (rev a1)
> Subsystem: ASUSTeK Computer Inc. Device [1043:82e8]
> Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B- DisINTx+
> Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
> <MAbort- >SERR- <PERR- INTx-
>
> 00:01.3 Co-processor [0b40]: nVidia Corporation MCP78S [GeForce 8200]
> Co-Processor [10de:0753] (rev a2)
> Subsystem: ASUSTeK Computer Inc. Device [1043:82e8]
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B- DisINTx-
> Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
> <MAbort- >SERR- <PERR- INTx-
> Latency: 0 (750ns min, 250ns max)
> Interrupt: pin B routed to IRQ 7
> Region 0: Memory at fdf80000 (32-bit, non-prefetchable) [size=512K]
>
> 00:01.4 RAM memory [0500]: nVidia Corporation MCP78S [GeForce 8200] Memory
> Controller [10de:0568] (rev a1)
> Subsystem: ASUSTeK Computer Inc. Device [1043:82e8]
> Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B- DisINTx+
> Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
> <MAbort- >SERR- <PERR- INTx-
>
> 00:02.0 USB Controller [0c03]: nVidia Corporation MCP78S [GeForce 8200] OHCI
> USB 1.1 Controller [10de:077b] (rev a1) (prog-if 10 [OHCI])
> Subsystem: ASUSTeK Computer Inc. Device [1043:82e8]
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
> <MAbort- >SERR- <PERR- INTx-
> Latency: 0 (750ns min, 250ns max)
> Interrupt: pin A routed to IRQ 20
> Region 0: Memory at fe02f000 (32-bit, non-prefetchable) [size=4K]
> Capabilities: [44] Power Management version 2
> Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
> PME(D0+,D1+,D2+,D3hot+,D3cold+)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
> Kernel driver in use: ohci_hcd
>
> 00:04.0 USB Controller [0c03]: nVidia Corporation MCP78S [GeForce 8200] OHCI
> USB 1.1 Controller [10de:077d] (rev a1) (prog-if 10 [OHCI])
> Subsystem: ASUSTeK Computer Inc. Device [1043:82e8]
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
> <MAbort- >SERR- <PERR- INTx-
> Latency: 0 (750ns min, 250ns max)
> Interrupt: pin A routed to IRQ 23
> Region 0: Memory at fe02d000 (32-bit, non-prefetchable) [size=4K]
> Capabilities: [44] Power Management version 2
> Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
> PME(D0+,D1+,D2+,D3hot+,D3cold+)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
> Kernel driver in use: ohci_hcd
>
> 00:06.0 IDE interface [0101]: nVidia Corporation MCP78S [GeForce 8200] IDE
> [10de:0759] (rev a1) (prog-if 8a [Master SecP PriP])
> Subsystem: ASUSTeK Computer Inc. Device [1043:82e8]
> Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
> <MAbort- >SERR- <PERR- INTx-
> Latency: 0 (750ns min, 250ns max)
> Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable)
> [disabled] [size=8]
> Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable)
> [disabled] [size=1]
> Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable)
> [disabled] [size=8]
> Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable)
> [disabled] [size=1]
> Region 4: I/O ports at fc00 [size=16]
> Capabilities: [44] Power Management version 2
> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
> PME(D0-,D1-,D2-,D3hot-,D3cold-)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
> Kernel driver in use: pata_amd
>
> 00:07.0 Audio device [0403]: nVidia Corporation Device [10de:0774] (rev a1)
> Subsystem: ASUSTeK Computer Inc. Device [1043:82fe]
> Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
> <MAbort- >SERR- <PERR- INTx-
> Interrupt: pin A routed to IRQ 23
> Region 0: Memory at fe020000 (32-bit, non-prefetchable) [disabled]
> [size=16K]
> Capabilities: [44] Power Management version 2
> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
> PME(D0-,D1-,D2-,D3hot+,D3cold+)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
> Kernel driver in use: pciback
>
> 00:08.0 PCI bridge [0604]: nVidia Corporation MCP78S [GeForce 8200] PCI
> Bridge [10de:075a] (rev a1) (prog-if 01 [Subtractive decode])
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
> <MAbort- >SERR- <PERR- INTx-
> Latency: 0
> Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
> I/O behind bridge: 0000e000-0000efff
> Memory behind bridge: fde00000-fdefffff
> Prefetchable memory behind bridge: fdd00000-fddfffff
> Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort+ <SERR- <PERR-
> BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
> PriDiscTmr- SecDiscTmr+ DiscTmrStat- DiscTmrSERREn-
> Capabilities: [b8] Subsystem: ASUSTeK Computer Inc. Device [1043:82e8]
> Capabilities: [8c] HyperTransport: MSI Mapping Enable+ Fixed-
> Mapping Address Base: 00000000fee00000
>
> 00:09.0 SATA controller [0106]: nVidia Corporation MCP78S [GeForce 8200] AHCI
> Controller [10de:0ad4] (rev a2) (prog-if 01 [AHCI 1.0])
> Subsystem: ASUSTeK Computer Inc. Device [1043:82e8]
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B- DisINTx+
> Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
> <MAbort- >SERR- <PERR- INTx-
> Latency: 0 (750ns min, 250ns max)
> Interrupt: pin A routed to IRQ 403
> Region 0: I/O ports at 09f0 [size=8]
> Region 1: I/O ports at 0bf0 [size=4]
> Region 2: I/O ports at 0970 [size=8]
> Region 3: I/O ports at 0b70 [size=4]
> Region 4: I/O ports at f700 [size=16]
> Region 5: Memory at fe026000 (32-bit, non-prefetchable) [size=8K]
> Capabilities: [44] Power Management version 2
> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
> PME(D0-,D1-,D2-,D3hot-,D3cold-)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
> Capabilities: [8c] SATA HBA <?>
> Capabilities: [b0] Message Signalled Interrupts: Mask- 64bit+ Queue=0/3
> Enable+
> Address: 00000000fee0100c Data: 4159
> Capabilities: [ec] HyperTransport: MSI Mapping Enable+ Fixed+
> Kernel driver in use: ahci
>
> 00:0a.0 Ethernet controller [0200]: nVidia Corporation MCP78S [GeForce 8200]
> Ethernet [10de:0760] (rev a2)
> Subsystem: ASUSTeK Computer Inc. Device [1043:82e8]
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B- DisINTx+
> Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
> <MAbort- >SERR- <PERR- INTx-
> Latency: 0 (250ns min, 5000ns max)
> Interrupt: pin A routed to IRQ 400
> Region 0: Memory at fe02b000 (32-bit, non-prefetchable) [size=4K]
> Region 1: I/O ports at f600 [size=8]
> Region 2: Memory at fe02a000 (32-bit, non-prefetchable) [size=256]
> Region 3: Memory at fe029000 (32-bit, non-prefetchable) [size=16]
> Capabilities: [44] Power Management version 2
> Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
> PME(D0+,D1+,D2+,D3hot+,D3cold+)
> Status: D0 PME-Enable+ DSel=0 DScale=0 PME-
> Capabilities: [50] Message Signalled Interrupts: Mask+ 64bit+ Queue=0/4
> Enable+
> Address: 00000000fee0100c Data: 4181
> Masking: 0000fffe Pending: 00000000
> Capabilities: [6c] HyperTransport: MSI Mapping Enable+ Fixed+
> Kernel driver in use: forcedeth
>
> 00:0b.0 PCI bridge [0604]: nVidia Corporation MCP78S [GeForce 8200] PCI
> Express Bridge [10de:0569] (rev a1) (prog-if 00 [Normal decode])
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
> <MAbort- >SERR- <PERR- INTx-
> Latency: 0, Cache Line Size: 32 bytes
> Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
> I/O behind bridge: 0000d000-0000dfff
> Memory behind bridge: fb000000-fcffffff
> Prefetchable memory behind bridge: 00000000d8000000-00000000e7ffffff
> Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
> <MAbort- <SERR- <PERR-
> BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B-
> PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
> Capabilities: [40] Subsystem: ASUSTeK Computer Inc. Device [1043:82e8]
> Capabilities: [48] Power Management version 2
> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
> PME(D0+,D1+,D2+,D3hot+,D3cold+)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
> Capabilities: [60] HyperTransport: MSI Mapping Enable+ Fixed-
> Mapping Address Base: 00000000fee00000
>
> 00:10.0 PCI bridge [0604]: nVidia Corporation MCP78S [GeForce 8200] PCI
> Express Bridge [10de:0778] (rev a1) (prog-if 00 [Normal decode])
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B- DisINTx+
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
> <MAbort- >SERR- <PERR- INTx-
> Latency: 0, Cache Line Size: 32 bytes
> Bus: primary=00, secondary=03, subordinate=06, sec-latency=0
> I/O behind bridge: 0000a000-0000cfff
> Memory behind bridge: fda00000-fdcfffff
> Prefetchable memory behind bridge: 00000000fd800000-00000000fd9fffff
> Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
> <MAbort- <SERR- <PERR-
> BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
> PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
> Capabilities: [40] Subsystem: ASUSTeK Computer Inc. Device [1043:82e8]
> Capabilities: [48] Power Management version 3
> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
> PME(D0+,D1+,D2+,D3hot+,D3cold+)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
> Capabilities: [50] Message Signalled Interrupts: Mask- 64bit+ Queue=0/1
> Enable+
> Address: 00000000fee0100c Data: 4121
> Capabilities: [60] HyperTransport: MSI Mapping Enable+ Fixed-
> Mapping Address Base: 00000000fee00000
> Capabilities: [80] Express (v2) Root Port (Slot+), MSI 00
> DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <64ns,
> L1 <1us
> ExtTag+ RBE+ FLReset-
> DevCtl: Report errors: Correctable- Non-Fatal- Fatal-
> Unsupported-
> RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
> MaxPayload 128 bytes, MaxReadReq 512 bytes
> DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr-
> TransPend-
> LnkCap: Port #0, Speed 5GT/s, Width x8, ASPM L0s L1, Latency L0
> <512ns, L1 <4us
> ClockPM- Suprise- LLActRep+ BwNot+
> LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
> ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
> LnkSta: Speed 5GT/s, Width x4, TrErr- Train- SlotClk+ DLActive+
> BWMgmt+ ABWMgmt+
> SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug-
> Surpise-
> Slot # 1, PowerLimit 75.000000; Interlock- NoCompl-
> SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq-
> LinkChg-
> Control: AttnInd Off, PwrInd On, Power- Interlock-
> SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+
> Interlock-
> Changed: MRL- PresDet+ LinkState+
> RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna-
> CRSVisible-
> RootCap: CRSVisible-
> RootSta: PME ReqID 0000, PMEStatus- PMEPending-
> Kernel driver in use: pcieport-driver
>
> 00:11.0 PCI bridge [0604]: nVidia Corporation Device [10de:0779] (rev a1)
> (prog-if 00 [Normal decode])
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B- DisINTx+
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
> <MAbort- >SERR- <PERR- INTx-
> Latency: 0, Cache Line Size: 32 bytes
> Bus: primary=00, secondary=07, subordinate=07, sec-latency=0
> I/O behind bridge: 00009000-00009fff
> Memory behind bridge: fd700000-fd7fffff
> Prefetchable memory behind bridge: 00000000fd600000-00000000fd6fffff
> Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
> <MAbort- <SERR- <PERR-
> BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
> PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
> Capabilities: [40] Subsystem: ASUSTeK Computer Inc. Device [1043:82e8]
> Capabilities: [48] Power Management version 3
> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
> PME(D0+,D1+,D2+,D3hot+,D3cold+)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
> Capabilities: [50] Message Signalled Interrupts: Mask- 64bit+ Queue=0/1
> Enable+
> Address: 00000000fee0100c Data: 4129
> Capabilities: [60] HyperTransport: MSI Mapping Enable+ Fixed-
> Mapping Address Base: 00000000fee00000
> Capabilities: [80] Express (v2) Root Port (Slot+), MSI 00
> DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <64ns,
> L1 <1us
> ExtTag+ RBE+ FLReset-
> DevCtl: Report errors: Correctable- Non-Fatal- Fatal-
> Unsupported-
> RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
> MaxPayload 256 bytes, MaxReadReq 512 bytes
> DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr-
> TransPend-
> LnkCap: Port #1, Speed 2.5GT/s, Width x8, ASPM L0s L1, Latency
> L0 <512ns, L1 <4us
> ClockPM- Suprise- LLActRep+ BwNot+
> LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
> ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
> LnkSta: Speed 2.5GT/s, Width x8, TrErr- Train- SlotClk+
> DLActive- BWMgmt- ABWMgmt-
> SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug-
> Surpise-
> Slot # 2, PowerLimit 10.000000; Interlock- NoCompl-
> SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq-
> LinkChg-
> Control: AttnInd Off, PwrInd On, Power- Interlock-
> SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet-
> Interlock-
> Changed: MRL- PresDet- LinkState-
> RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna-
> CRSVisible-
> RootCap: CRSVisible-
> RootSta: PME ReqID 0000, PMEStatus- PMEPending-
> Kernel driver in use: pcieport-driver
>
> 00:13.0 PCI bridge [0604]: nVidia Corporation Device [10de:077a] (rev a1)
> (prog-if 00 [Normal decode])
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B- DisINTx+
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
> <MAbort- >SERR- <PERR- INTx-
> Latency: 0, Cache Line Size: 32 bytes
> Bus: primary=00, secondary=08, subordinate=09, sec-latency=0
> I/O behind bridge: 00008000-00008fff
> Memory behind bridge: fd500000-fd5fffff
> Prefetchable memory behind bridge: 00000000fd400000-00000000fd4fffff
> Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
> <MAbort- <SERR- <PERR-
> BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
> PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
> Capabilities: [40] Subsystem: ASUSTeK Computer Inc. Device [1043:82e8]
> Capabilities: [48] Power Management version 3
> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
> PME(D0+,D1+,D2+,D3hot+,D3cold+)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
> Capabilities: [50] Message Signalled Interrupts: Mask- 64bit+ Queue=0/1
> Enable+
> Address: 00000000fee0100c Data: 4131
> Capabilities: [60] HyperTransport: MSI Mapping Enable+ Fixed-
> Mapping Address Base: 00000000fee00000
> Capabilities: [80] Express (v1) Root Port (Slot+), MSI 00
> DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <64ns,
> L1 <1us
> ExtTag+ RBE+ FLReset-
> DevCtl: Report errors: Correctable- Non-Fatal- Fatal-
> Unsupported-
> RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
> MaxPayload 256 bytes, MaxReadReq 512 bytes
> DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr-
> TransPend-
> LnkCap: Port #3, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency
> L0 <512ns, L1 <4us
> ClockPM- Suprise- LLActRep+ BwNot-
> LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
> ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
> LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+
> DLActive+ BWMgmt- ABWMgmt-
> SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug-
> Surpise-
> Slot # 4, PowerLimit 10.000000; Interlock- NoCompl-
> SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq-
> LinkChg-
> Control: AttnInd Off, PwrInd On, Power- Interlock-
> SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+
> Interlock-
> Changed: MRL- PresDet+ LinkState+
> RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna-
> CRSVisible-
> RootCap: CRSVisible-
> RootSta: PME ReqID 0000, PMEStatus- PMEPending-
> Kernel driver in use: pcieport-driver
>
> 00:14.0 PCI bridge [0604]: nVidia Corporation Device [10de:077a] (rev a1)
> (prog-if 00 [Normal decode])
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B- DisINTx+
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
> <MAbort- >SERR- <PERR- INTx-
> Latency: 0, Cache Line Size: 32 bytes
> Bus: primary=00, secondary=0a, subordinate=0a, sec-latency=0
> I/O behind bridge: 00007000-00007fff
> Memory behind bridge: fd300000-fd3fffff
> Prefetchable memory behind bridge: 00000000fd200000-00000000fd2fffff
> Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
> <MAbort- <SERR- <PERR-
> BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
> PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
> Capabilities: [40] Subsystem: ASUSTeK Computer Inc. Device [1043:82e8]
> Capabilities: [48] Power Management version 3
> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
> PME(D0+,D1+,D2+,D3hot+,D3cold+)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
> Capabilities: [50] Message Signalled Interrupts: Mask- 64bit+ Queue=0/1
> Enable+
> Address: 00000000fee0100c Data: 4139
> Capabilities: [60] HyperTransport: MSI Mapping Enable+ Fixed-
> Mapping Address Base: 00000000fee00000
> Capabilities: [80] Express (v1) Root Port (Slot+), MSI 00
> DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <64ns,
> L1 <1us
> ExtTag+ RBE+ FLReset-
> DevCtl: Report errors: Correctable- Non-Fatal- Fatal-
> Unsupported-
> RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
> MaxPayload 128 bytes, MaxReadReq 512 bytes
> DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr-
> TransPend-
> LnkCap: Port #4, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency
> L0 <512ns, L1 <4us
> ClockPM- Suprise- LLActRep+ BwNot-
> LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
> ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
> LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+
> DLActive+ BWMgmt- ABWMgmt-
> SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug-
> Surpise-
> Slot # 5, PowerLimit 10.000000; Interlock- NoCompl-
> SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq-
> LinkChg-
> Control: AttnInd Off, PwrInd On, Power- Interlock-
> SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+
> Interlock-
> Changed: MRL- PresDet+ LinkState+
> RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna-
> CRSVisible-
> RootCap: CRSVisible-
> RootSta: PME ReqID 0000, PMEStatus- PMEPending-
> Kernel driver in use: pcieport-driver
>
> 00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] K8
> [Athlon64/Opteron] HyperTransport Technology Configuration [1022:1100]
> Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
> <MAbort- >SERR- <PERR- INTx-
> Capabilities: [80] HyperTransport: Host or Secondary Interface
> !!! Possibly incomplete decoding
> Command: WarmRst+ DblEnd-
> Link Control: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO- <CRCErr=0
> Link Config: MLWI=16bit MLWO=16bit LWI=16bit LWO=16bit
> Revision ID: 1.02
>
> 00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] K8
> [Athlon64/Opteron] Address Map [1022:1101]
> Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B- DisINTx-
> Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
> <MAbort- >SERR- <PERR- INTx-
>
> 00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] K8
> [Athlon64/Opteron] DRAM Controller [1022:1102]
> Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B- DisINTx-
> Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
> <MAbort- >SERR- <PERR- INTx-
>
> 00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] K8
> [Athlon64/Opteron] Miscellaneous Control [1022:1103]
> Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
> <MAbort- >SERR- <PERR- INTx-
> Capabilities: [f0] Secure device <?>
> Kernel driver in use: k8temp
>
> 01:08.0 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
> Controller [1106:3038] (rev 62) (prog-if 00 [UHCI])
> Subsystem: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller
> [1106:3038]
> Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
> Interrupt: pin A routed to IRQ 16
> Region 4: I/O ports at ec00 [disabled] [size=32]
> Capabilities: [80] Power Management version 2
> Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA
> PME(D0+,D1+,D2+,D3hot+,D3cold+)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
> Kernel driver in use: pciback
>
> 01:08.1 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
> Controller [1106:3038] (rev 62) (prog-if 00 [UHCI])
> Subsystem: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller
> [1106:3038]
> Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
> Interrupt: pin B routed to IRQ 17
> Region 4: I/O ports at e800 [disabled] [size=32]
> Capabilities: [80] Power Management version 2
> Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA
> PME(D0+,D1+,D2+,D3hot+,D3cold+)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
> Kernel driver in use: pciback
>
> 01:08.2 USB Controller [0c03]: VIA Technologies, Inc. USB 2.0 [1106:3104]
> (rev 65) (prog-if 20 [EHCI])
> Subsystem: VIA Technologies, Inc. USB 2.0 [1106:3104]
> Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
> Interrupt: pin C routed to IRQ 18
> Region 0: Memory at fdeff000 (32-bit, non-prefetchable) [disabled]
> [size=256]
> Capabilities: [80] Power Management version 2
> Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA
> PME(D0+,D1+,D2+,D3hot+,D3cold+)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
> Kernel driver in use: pciback
>
> 02:00.0 VGA compatible controller [0300]: nVidia Corporation Device
> [10de:084d] (rev a2) (prog-if 00 [VGA controller])
> Subsystem: ASUSTeK Computer Inc. Device [1043:82e8]
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR+ FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
> <MAbort- >SERR- <PERR- INTx-
> Latency: 0
> Interrupt: pin A routed to IRQ 11
> Region 0: Memory at fb000000 (32-bit, non-prefetchable) [size=16M]
> Region 1: Memory at d8000000 (64-bit, prefetchable) [size=128M]
> Region 3: Memory at e6000000 (64-bit, prefetchable) [size=32M]
> Region 5: I/O ports at dc00 [size=128]
> [virtual] Expansion ROM at e0000000 [disabled] [size=128K]
> Capabilities: [60] Power Management version 2
> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
> PME(D0-,D1-,D2-,D3hot-,D3cold-)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
> Capabilities: [68] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0
> Enable-
> Address: 0000000000000000 Data: 0000
>
> 03:00.0 PCI bridge [0604]: PLX Technology, Inc. Device [10b5:8613] (rev ba)
> (prog-if 00 [Normal decode])
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B- DisINTx+
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
> <MAbort- >SERR- <PERR- INTx-
> Latency: 0, Cache Line Size: 32 bytes
> Region 0: Memory at fdce0000 (32-bit, non-prefetchable) [size=128K]
> Bus: primary=03, secondary=04, subordinate=06, sec-latency=0
> I/O behind bridge: 0000a000-0000cfff
> Memory behind bridge: fda00000-fdbfffff
> Prefetchable memory behind bridge: 00000000fd800000-00000000fd9fffff
> Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
> <MAbort- <SERR- <PERR-
> BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
> PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
> Capabilities: [40] Power Management version 3
> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
> PME(D0+,D1-,D2-,D3hot+,D3cold+)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
> Capabilities: [48] Message Signalled Interrupts: Mask+ 64bit+ Queue=0/2
> Enable+
> Address: 00000000fee0100c Data: 4141
> Masking: 00000001 Pending: 00000000
> Capabilities: [68] Express (v2) Upstream Port, MSI 00
> DevCap: MaxPayload 2048 bytes, PhantFunc 0, Latency L0s <64ns,
> L1 <1us
> ExtTag- AttnBtn- AttnInd- PwrInd- RBE+
> FLReset-SlotPowerLimit 0.000000W
> DevCtl: Report errors: Correctable- Non-Fatal- Fatal-
> Unsupported-
> RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
> MaxPayload 128 bytes, MaxReadReq 128 bytes
> DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr-
> TransPend-
> LnkCap: Port #0, Speed 5GT/s, Width x4, ASPM L0s L1, Latency L0
> <1us, L1 <2us
> ClockPM- Suprise- LLActRep- BwNot-
> LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk-
> ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
> LnkSta: Speed 5GT/s, Width x4, TrErr- Train- SlotClk- DLActive-
> BWMgmt- ABWMgmt-
> Capabilities: [a4] Subsystem: PLX Technology, Inc. Device [10b5:8613]
> Capabilities: [100] Device Serial Number 00-0e-df-b5-10-01-86-ba
> Capabilities: [fb4] Advanced Error Reporting <?>
> Capabilities: [138] Power Budgeting <?>
> Capabilities: [148] Virtual Channel <?>
> Capabilities: [448] Vendor Specific Information <?>
> Capabilities: [950] Vendor Specific Information <?>
> Kernel driver in use: pcieport-driver
>
> 04:01.0 PCI bridge [0604]: PLX Technology, Inc. Device [10b5:8613] (rev ba)
> (prog-if 00 [Normal decode])
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B- DisINTx+
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
> <MAbort- >SERR- <PERR- INTx-
> Latency: 0, Cache Line Size: 32 bytes
> Bus: primary=04, secondary=05, subordinate=05, sec-latency=0
> I/O behind bridge: 0000c000-0000cfff
> Memory behind bridge: fdb00000-fdbfffff
> Prefetchable memory behind bridge: 00000000fd900000-00000000fd9fffff
> Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
> <MAbort- <SERR- <PERR-
> BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
> PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
> Capabilities: [40] Power Management version 3
> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
> PME(D0+,D1-,D2-,D3hot+,D3cold+)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
> Capabilities: [48] Message Signalled Interrupts: Mask+ 64bit+ Queue=0/2
> Enable+
> Address: 00000000fee0100c Data: 4149
> Masking: 00000001 Pending: 00000000
> Capabilities: [68] Express (v2) Downstream Port (Slot+), MSI 00
> DevCap: MaxPayload 2048 bytes, PhantFunc 0, Latency L0s <64ns,
> L1 <1us
> ExtTag- RBE+ FLReset-
> DevCtl: Report errors: Correctable- Non-Fatal- Fatal-
> Unsupported-
> RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
> MaxPayload 128 bytes, MaxReadReq 128 bytes
> DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr-
> TransPend-
> LnkCap: Port #1, Speed 5GT/s, Width x4, ASPM L0s L1, Latency L0
> <1us, L1 <2us
> ClockPM- Suprise+ LLActRep+ BwNot+
> LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk-
> ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
> LnkSta: Speed 5GT/s, Width x1, TrErr- Train- SlotClk- DLActive+
> BWMgmt- ABWMgmt+
> SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug-
> Surpise-
> Slot # 71, PowerLimit 25.000000; Interlock- NoCompl-
> SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq-
> LinkChg-
> Control: AttnInd Off, PwrInd Off, Power- Interlock-
> SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+
> Interlock-
> Changed: MRL- PresDet+ LinkState+
> Capabilities: [a4] Subsystem: PLX Technology, Inc. Device [10b5:8613]
> Capabilities: [100] Device Serial Number 00-0e-df-b5-10-01-86-ba
> Capabilities: [fb4] Advanced Error Reporting <?>
> Capabilities: [148] Virtual Channel <?>
> Capabilities: [520] Access Controls <?>
> Capabilities: [950] Vendor Specific Information <?>
> Kernel driver in use: pcieport-driver
>
> 04:02.0 PCI bridge [0604]: PLX Technology, Inc. Device [10b5:8613] (rev ba)
> (prog-if 00 [Normal decode])
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B- DisINTx+
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
> <MAbort- >SERR- <PERR- INTx-
> Latency: 0, Cache Line Size: 32 bytes
> Bus: primary=04, secondary=06, subordinate=06, sec-latency=0
> I/O behind bridge: 0000a000-0000bfff
> Memory behind bridge: fda00000-fdafffff
> Prefetchable memory behind bridge: 00000000fd800000-00000000fd8fffff
> Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
> <MAbort- <SERR- <PERR-
> BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
> PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
> Capabilities: [40] Power Management version 3
> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
> PME(D0+,D1-,D2-,D3hot+,D3cold+)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
> Capabilities: [48] Message Signalled Interrupts: Mask+ 64bit+ Queue=0/2
> Enable+
> Address: 00000000fee0100c Data: 4151
> Masking: 00000001 Pending: 00000000
> Capabilities: [68] Express (v2) Downstream Port (Slot+), MSI 00
> DevCap: MaxPayload 2048 bytes, PhantFunc 0, Latency L0s <64ns,
> L1 <1us
> ExtTag- RBE+ FLReset-
> DevCtl: Report errors: Correctable- Non-Fatal- Fatal-
> Unsupported-
> RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
> MaxPayload 128 bytes, MaxReadReq 128 bytes
> DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr-
> TransPend-
> LnkCap: Port #2, Speed 5GT/s, Width x4, ASPM L0s L1, Latency L0
> <1us, L1 <2us
> ClockPM- Suprise+ LLActRep+ BwNot+
> LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk-
> ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
> LnkSta: Speed 5GT/s, Width x1, TrErr- Train- SlotClk- DLActive+
> BWMgmt- ABWMgmt+
> SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug-
> Surpise-
> Slot # 72, PowerLimit 25.000000; Interlock- NoCompl-
> SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq-
> LinkChg-
> Control: AttnInd Off, PwrInd Off, Power- Interlock-
> SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+
> Interlock-
> Changed: MRL- PresDet+ LinkState+
> Capabilities: [a4] Subsystem: PLX Technology, Inc. Device [10b5:8613]
> Capabilities: [100] Device Serial Number 00-0e-df-b5-10-01-86-ba
> Capabilities: [fb4] Advanced Error Reporting <?>
> Capabilities: [148] Virtual Channel <?>
> Capabilities: [520] Access Controls <?>
> Capabilities: [950] Vendor Specific Information <?>
> Kernel driver in use: pcieport-driver
>
> 05:00.0 USB Controller [0c03]: NEC Corporation Device [1033:0194] (rev 03)
> (prog-if 30)
> Subsystem: ASUSTeK Computer Inc. Device [1043:8413]
> Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
> <MAbort- >SERR- <PERR- INTx-
> Interrupt: pin A routed to IRQ 16
> Region 0: Memory at fdbfe000 (64-bit, non-prefetchable) [disabled]
> [size=8K]
> Capabilities: [50] Power Management version 3
> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
> PME(D0+,D1-,D2-,D3hot+,D3cold-)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
> Capabilities: [70] Message Signalled Interrupts: Mask- 64bit+ Queue=0/3
> Enable-
> Address: 0000000000000000 Data: 0000
> Capabilities: [90] MSI-X: Enable- Mask- TabSize=8
> Vector table: BAR=0 offset=00001000
> PBA: BAR=0 offset=00001080
> Capabilities: [a0] Express (v2) Endpoint, MSI 00
> DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s
> unlimited, L1 unlimited
> ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
> DevCtl: Report errors: Correctable- Non-Fatal- Fatal-
> Unsupported-
> RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
> MaxPayload 128 bytes, MaxReadReq 512 bytes
> DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr-
> TransPend-
> LnkCap: Port #0, Speed 5GT/s, Width x1, ASPM L0s L1, Latency L0
> <4us, L1 unlimited
> ClockPM+ Suprise- LLActRep- BwNot-
> LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
> ExtSynch- ClockPM+ AutWidDis- BWInt- AutBWInt-
> LnkSta: Speed 5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive-
> BWMgmt- ABWMgmt-
> Capabilities: [100] Advanced Error Reporting <?>
> Capabilities: [140] Device Serial Number ff-ff-ff-ff-ff-ff-ff-ff
> Capabilities: [150] #18
> Kernel driver in use: pciback
>
> 06:00.0 SATA controller [0106]: Device [1b4b:9123] (rev 10) (prog-if 01 [AHCI
> 1.0])
> Subsystem: ASUSTeK Computer Inc. Device [1043:8400]
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B- DisINTx+
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
> <MAbort- >SERR- <PERR- INTx-
> Latency: 0, Cache Line Size: 32 bytes
> Interrupt: pin A routed to IRQ 402
> Region 0: I/O ports at bc00 [size=8]
> Region 1: I/O ports at b800 [size=4]
> Region 2: I/O ports at b400 [size=8]
> Region 3: I/O ports at b000 [size=4]
> Region 4: I/O ports at ac00 [size=16]
> Region 5: Memory at fdaff000 (32-bit, non-prefetchable) [size=2K]
> Expansion ROM at fdae0000 [disabled] [size=64K]
> Capabilities: [40] Power Management version 3
> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
> PME(D0-,D1-,D2-,D3hot+,D3cold-)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
> Capabilities: [50] Message Signalled Interrupts: Mask- 64bit- Queue=0/0
> Enable+
> Address: fee0100c Data: 4161
> Capabilities: [70] Express (v2) Legacy Endpoint, MSI 00
> DevCap: MaxPayload 512 bytes, PhantFunc 0, Latency L0s <1us, L1
> <8us
> ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
> DevCtl: Report errors: Correctable- Non-Fatal- Fatal-
> Unsupported-
> RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop-
> MaxPayload 128 bytes, MaxReadReq 512 bytes
> DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr-
> TransPend-
> LnkCap: Port #0, Speed 5GT/s, Width x1, ASPM L0s L1, Latency L0
> <512ns, L1 <64us
> ClockPM- Suprise- LLActRep- BwNot-
> LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
> ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
> LnkSta: Speed 5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive-
> BWMgmt- ABWMgmt-
> Capabilities: [100] Advanced Error Reporting <?>
> Kernel driver in use: ahci
>
> 08:00.0 PCI bridge [0604]: Texas Instruments XIO2000(A)/XIO2200(A) PCI
> Express-to-PCI Bridge [104c:8231] (rev 03) (prog-if 00 [Normal decode])
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
> <MAbort- >SERR- <PERR- INTx-
> Latency: 0, Cache Line Size: 32 bytes
> Bus: primary=08, secondary=09, subordinate=09, sec-latency=32
> I/O behind bridge: 00008000-00008fff
> Memory behind bridge: fd500000-fd5fffff
> Prefetchable memory behind bridge: 00000000fd400000-00000000fd4fffff
> Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- <SERR- <PERR-
> BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
> PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
> Capabilities: [50] Power Management version 2
> Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
> PME(D0-,D1-,D2-,D3hot-,D3cold-)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
> Bridge: PM- B3+
> Capabilities: [60] Message Signalled Interrupts: Mask- 64bit+ Queue=0/4
> Enable-
> Address: 0000000000000000 Data: 0000
> Capabilities: [80] Subsystem: Gammagraphx, Inc. Device [0000:0000]
> Capabilities: [90] Express (v1) PCI/PCI-X Bridge, MSI 00
> DevCap: MaxPayload 512 bytes, PhantFunc 0, Latency L0s <4us, L1
> <64us
> ExtTag- AttnBtn- AttnInd- PwrInd- RBE- FLReset-
> DevCtl: Report errors: Correctable- Non-Fatal- Fatal-
> Unsupported-
> RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+ BrConfRtry-
> MaxPayload 256 bytes, MaxReadReq 512 bytes
> DevSta: CorrErr- UncorrErr+ FatalErr- UnsuppReq+ AuxPwr+
> TransPend-
> LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency
> L0 <512ns, L1 <16us
> ClockPM- Suprise- LLActRep- BwNot-
> LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk+
> ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
> LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+
> DLActive- BWMgmt- ABWMgmt-
> Capabilities: [100] Advanced Error Reporting <?>
>
> 09:01.0 USB Controller [0c03]: NEC Corporation USB [1033:0035] (rev 43)
> (prog-if 10 [OHCI])
> Subsystem: NEC Corporation Hama USB 2.0 CardBus [1033:0035]
> Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
> Interrupt: pin A routed to IRQ 16
> Region 0: Memory at fd5ff000 (32-bit, non-prefetchable) [disabled]
> [size=4K]
> Capabilities: [40] Power Management version 2
> Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
> PME(D0+,D1+,D2+,D3hot+,D3cold-)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
> Kernel driver in use: pciback
>
> 09:01.1 USB Controller [0c03]: NEC Corporation USB [1033:0035] (rev 43)
> (prog-if 10 [OHCI])
> Subsystem: NEC Corporation Hama USB 2.0 CardBus [1033:0035]
> Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
> Interrupt: pin B routed to IRQ 16
> Region 0: Memory at fd5fe000 (32-bit, non-prefetchable) [disabled]
> [size=4K]
> Capabilities: [40] Power Management version 2
> Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
> PME(D0+,D1+,D2+,D3hot+,D3cold-)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
> Kernel driver in use: pciback
>
> 09:01.2 USB Controller [0c03]: NEC Corporation USB 2.0 [1033:00e0] (rev 04)
> (prog-if 20 [EHCI])
> Subsystem: Device [1838:1074]
> Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
> Interrupt: pin C routed to IRQ 16
> Region 0: Memory at fd5fd000 (32-bit, non-prefetchable) [disabled]
> [size=256]
> Capabilities: [40] Power Management version 2
> Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
> PME(D0+,D1+,D2+,D3hot+,D3cold-)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
> Kernel driver in use: pciback
>
> 0a:00.0 Ethernet controller [0200]: Intel Corporation 82572EI Gigabit
> Ethernet Controller (Copper) [8086:10b9] (rev 06)
> Subsystem: Intel Corporation PRO/1000 PT Desktop Adapter [8086:1083]
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B- DisINTx+
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
> <MAbort- >SERR- <PERR- INTx-
> Latency: 0, Cache Line Size: 32 bytes
> Interrupt: pin A routed to IRQ 401
> Region 0: Memory at fd3e0000 (32-bit, non-prefetchable) [size=128K]
> Region 1: Memory at fd3c0000 (32-bit, non-prefetchable) [size=128K]
> Region 2: I/O ports at 7c00 [size=32]
> Expansion ROM at fd3a0000 [disabled] [size=128K]
> Capabilities: [c8] Power Management version 2
> Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA
> PME(D0+,D1-,D2-,D3hot+,D3cold+)
> Status: D0 PME-Enable- DSel=0 DScale=1 PME-
> Capabilities: [d0] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0
> Enable+
> Address: 00000000fee0100c Data: 4179
> Capabilities: [e0] Express (v1) Endpoint, MSI 00
> DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <512ns,
> L1 <64us
> ExtTag- AttnBtn- AttnInd- PwrInd- RBE- FLReset-
> DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+
> Unsupported+
> RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
> MaxPayload 128 bytes, MaxReadReq 512 bytes
> DevSta: CorrErr- UncorrErr+ FatalErr- UnsuppReq+ AuxPwr+
> TransPend-
> LnkCap: Port #4, Speed 2.5GT/s, Width x1, ASPM L0s, Latency L0
> <4us, L1 <64us
> ClockPM- Suprise- LLActRep- BwNot-
> LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
> ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
> LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+
> DLActive- BWMgmt- ABWMgmt-
> Capabilities: [100] Advanced Error Reporting <?>
> Capabilities: [140] Device Serial Number fe-68-2c-ff-ff-21-1b-00
> Kernel driver in use: e1000e
>
> __ __ _ _ ___ _ _
> \ \/ /___ _ __ | || | / _ \ / | _ __ ___/ | _ __ _ __ ___
> \ // _ \ \047_ \ | || |_| | | || |__| \047__/ __| |__| \047_ \| \047__/ _
> \
> / \ __/ | | | |__ _| |_| || |__| | | (__| |__| |_) | | | __/
> /_/\_\___|_| |_| |_|(_)___(_)_| |_| \___|_| | .__/|_| \___|
> |_|
> (XEN) Xen version 4.0.1-rc1-pre (root@) (gcc version 4.3.2 (Debian 4.3.2-1.1)
> ) Fri Apr 16 16:39:44 CEST 2010
> (XEN) Latest ChangeSet: Mon Apr 12 18:29:36 2010 +0100 21107:11010cf627c8
> (XEN) Command line: dom0_mem=768M loglvl=all loglvl_guest=all
> (XEN) Video information:
> (XEN) VGA is text mode 80x25, font 8x0
> (XEN) VBE/DDC methods: none; EDID transfer time: 0 seconds
> (XEN) EDID info not retrieved because no DDC retrieval method detected
> (XEN) Disc information:
> (XEN) Found 1 MBR signatures
> (XEN) Found 1 EDD information structures
> (XEN) Xen-e820 RAM map:
> (XEN) 0000000000000000 - 000000000009dc00 (usable)
> (XEN) 000000000009dc00 - 00000000000a0000 (reserved)
> (XEN) 00000000000f0000 - 0000000000100000 (reserved)
> (XEN) 0000000000100000 - 00000000afee0000 (usable)
> (XEN) 00000000afee0000 - 00000000afee3000 (ACPI NVS)
> (XEN) 00000000afee3000 - 00000000afef0000 (ACPI data)
> (XEN) 00000000afef0000 - 00000000aff00000 (reserved)
> (XEN) 00000000b0000000 - 00000000c0000000 (reserved)
> (XEN) 00000000f0000000 - 00000000f4000000 (reserved)
> (XEN) 00000000fec00000 - 0000000100000000 (reserved)
> (XEN) 0000000100000000 - 0000000200000000 (usable)
> (XEN) ACPI: RSDP 000F7550, 0024 (r2 Nvidia)
> (XEN) ACPI: XSDT AFEE3100, 004C (r1 Nvidia ASUSACPI 42302E31 AWRD 0)
> (XEN) ACPI: FACP AFEED3C0, 00F4 (r3 Nvidia ASUSACPI 42302E31 AWRD 0)
> (XEN) ACPI Warning (tbfadt-0444): Optional field "Pm2ControlBlock" has zero
> address or length: 0000000000000000/1 [20070126]
> (XEN) ACPI: DSDT AFEE3280, A0D8 (r1 NVIDIA ASUSACPI 1000 MSFT 3000000)
> (XEN) ACPI: FACS AFEE0A80, 0040
> (XEN) ACPI: SSDT AFEED600, 028A (r1 PTLTD POWERNOW 1 LTP 1)
> (XEN) ACPI: HPET AFEED900, 0038 (r1 Nvidia ASUSACPI 42302E31 AWRD 98)
> (XEN) ACPI: MCFG AFEED980, 003C (r1 Nvidia ASUSACPI 42302E31 AWRD 0)
> (XEN) ACPI: APIC AFEED500, 008E (r1 Nvidia ASUSACPI 42302E31 AWRD 0)
> (XEN) System RAM: 6881MB (7046192kB)
> (XEN) No NUMA configuration found
> (XEN) Faking a node at 0000000000000000-0000000200000000
> (XEN) Domain heap initialised
> (XEN) found SMP MP-table at 000f59c0
> (XEN) DMI 2.5 present.
> (XEN) Using APIC driver default
> (XEN) ACPI: PM-Timer IO Port: 0x1008
> (XEN) ACPI: ACPI SLEEP INFO: pm1x_cnt[1004,0], pm1x_evt[1000,0]
> (XEN) ACPI: wakeup_vec[afee0a8c], vec_size[20]
> (XEN) ACPI: Local APIC address 0xfee00000
> (XEN) ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
> (XEN) Processor #0 15:11 APIC version 16
> (XEN) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
> (XEN) Processor #1 15:11 APIC version 16
> (XEN) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
> (XEN) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
> (XEN) ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
> (XEN) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
> (XEN) ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
> (XEN) ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
> (XEN) ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
> (XEN) IOAPIC[0]: apic_id 4, version 17, address 0xfec00000, GSI 0-23
> (XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
> (XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
> (XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
> (XEN) ACPI: IRQ0 used by override.
> (XEN) ACPI: IRQ2 used by override.
> (XEN) ACPI: IRQ9 used by override.
> (XEN) ACPI: IRQ14 used by override.
> (XEN) Enabling APIC mode: Flat. Using 1 I/O APICs
> (XEN) ACPI: HPET id: 0x10de8201 base: 0xfeff0000
> (XEN) PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - 63
> (XEN) PCI: MCFG area at f0000000 reserved in E820
> (XEN) Using ACPI (MADT) for SMP configuration information
> (XEN) Using scheduler: SMP Credit Scheduler (credit)
> (XEN) Detected 2500.058 MHz processor.
> (XEN) Initing memory sharing.
> (XEN) CPU0: AMD Flush Filter disabled
> (XEN) HVM: ASIDs enabled.
> (XEN) HVM: SVM enabled
> (XEN) AMD K8 machine check reporting enabled
> (XEN) AMD-Vi: IOMMU not found!
> (XEN) I/O virtualisation disabled
> (XEN) CPU1: AMD Flush Filter disabled
> (XEN) AMD: Disabling C1 Clock Ramping Node #0
> (XEN) Total of 2 processors activated.
> (XEN) ENABLING IO-APIC IRQs
> (XEN) -> Using new ACK method
> (XEN) ..TIMER: vector=0xF0 apic1=0 pin1=2 apic2=-1 pin2=-1
> (XEN) checking TSC synchronization across 2 CPUs:
> (XEN) CPU#0 had -351 usecs TSC skew, fixed it up.
> (XEN) CPU#1 had 351 usecs TSC skew, fixed it up.
> (XEN) Platform timer is 25.000MHz HPET
> (XEN) Allocated console ring of 16 KiB.
> (XEN) Brought up 2 CPUs
> (XEN) HPET: 3 timers in total, 0 timers will be used for broadcast
> (XEN) ACPI sleep modes: S3
> (XEN) MCA: Use hw thresholding to adjust polling frequency
> (XEN) mcheck_poll: Machine check polling timer started.
> (XEN) *** LOADING DOMAIN 0 ***
> (XEN) Xen kernel: 64-bit, lsb, compat32
> (XEN) Dom0 kernel: 64-bit, PAE, lsb, paddr 0x1000000 -> 0x1b40000
> (XEN) PHYSICAL MEMORY ARRANGEMENT:
> (XEN) Dom0 alloc.: 00000001f4000000->00000001f8000000 (180224 pages to be
> allocated)
> (XEN) VIRTUAL MEMORY ARRANGEMENT:
> (XEN) Loaded kernel: ffffffff81000000->ffffffff81b40000
> (XEN) Init. ramdisk: ffffffff81b40000->ffffffff8210a600
> (XEN) Phys-Mach map: ffffffff8210b000->ffffffff8228b000
> (XEN) Start info: ffffffff8228b000->ffffffff8228b4b4
> (XEN) Page tables: ffffffff8228c000->ffffffff822a1000
> (XEN) Boot stack: ffffffff822a1000->ffffffff822a2000
> (XEN) TOTAL: ffffffff80000000->ffffffff82400000
> (XEN) ENTRY ADDRESS: ffffffff81991a20
> (XEN) Dom0 has maximum 2 VCPUs
> (XEN) Scrubbing Free RAM:
> .............................................................done.
> (XEN) Xen trace buffers: disabled
> (XEN) Std. Loglevel: All
> (XEN) Guest Loglevel: Nothing (Rate-limited: Errors and warnings)
> (XEN) Xen is relinquishing VGA console.
> (XEN) *** Serial input -> DOM0 (type \047CTRL-a\047 three times to switch
> input to Xen)
> (XEN) Freed 164kB init memory.
> (XEN) io_apic.c:2290:
> (XEN) ioapic_guest_write: apic=0, pin=0, irq=0
> (XEN) ioapic_guest_write: new_entry=000109f0
> (XEN) ioapic_guest_write: old_entry=00010000 pirq=0
> (XEN) ioapic_guest_write: Attempt to modify IO-APIC pin for in-use IRQ!
> (XEN) io_apic.c:2290:
> (XEN) ioapic_guest_write: apic=0, pin=2, irq=0
> (XEN) ioapic_guest_write: new_entry=000109f0
> (XEN) ioapic_guest_write: old_entry=000009f0 pirq=0
> (XEN) ioapic_guest_write: Attempt to modify IO-APIC pin for in-use IRQ!
> (XEN) irq.c:1445: dom0: pirq 0 or irq 3 already mapped
> (XEN) irq.c:1445: dom0: pirq 0 or irq 4 already mapped
> (XEN) irq.c:1445: dom0: pirq 0 or irq 5 already mapped
> (XEN) irq.c:1445: dom0: pirq 0 or irq 6 already mapped
> (XEN) irq.c:1445: dom0: pirq 0 or irq 7 already mapped
> (XEN) irq.c:1445: dom0: pirq 0 or irq 8 already mapped
> (XEN) irq.c:1445: dom0: pirq 0 or irq 9 already mapped
> (XEN) irq.c:1445: dom0: pirq 0 or irq 10 already mapped
> (XEN) irq.c:1445: dom0: pirq 0 or irq 11 already mapped
> (XEN) irq.c:1445: dom0: pirq 0 or irq 12 already mapped
> (XEN) allocated vector a0 for irq 16
> (XEN) allocated vector a8 for irq 17
> (XEN) allocated vector b0 for irq 18
> (XEN) allocated vector b8 for irq 19
> (XEN) allocated vector c0 for irq 20
> (XEN) allocated vector c8 for irq 21
> (XEN) allocated vector d0 for irq 22
> (XEN) allocated vector d8 for irq 23
> (XEN) io_apic.c:2290:
> (XEN) ioapic_guest_write: apic=0, pin=0, irq=0
> (XEN) ioapic_guest_write: new_entry=000009f0
> (XEN) ioapic_guest_write: old_entry=00010000 pirq=0
> (XEN) ioapic_guest_write: Attempt to modify IO-APIC pin for in-use IRQ!
> (XEN) PCI add device 00:00.0
> (XEN) PCI add device 00:01.0
> (XEN) PCI add device 00:01.1
> (XEN) PCI add device 00:01.2
> (XEN) PCI add device 00:01.3
> (XEN) PCI add device 00:01.4
> (XEN) PCI add device 00:02.0
> (XEN) PCI add device 00:04.0
> (XEN) PCI add device 00:06.0
> (XEN) PCI add device 00:07.0
> (XEN) PCI add device 00:08.0
> (XEN) PCI add device 00:09.0
> (XEN) PCI add device 00:0a.0
> (XEN) PCI add device 00:0b.0
> (XEN) PCI add device 00:10.0
> (XEN) PCI add device 00:11.0
> (XEN) PCI add device 00:13.0
> (XEN) PCI add device 00:14.0
> (XEN) PCI add device 00:18.0
> (XEN) PCI add device 00:18.1
> (XEN) PCI add device 00:18.2
> (XEN) PCI add device 00:18.3
> (XEN) PCI add device 01:08.0
> (XEN) PCI add device 01:08.1
> (XEN) PCI add device 01:08.2
> (XEN) PCI add device 02:00.0
> (XEN) PCI add device 03:00.0
> (XEN) PCI add device 04:01.0
> (XEN) PCI add device 04:02.0
> (XEN) PCI add device 05:00.0
> (XEN) PCI add device 06:00.0
> (XEN) PCI add device 08:00.0
> (XEN) PCI add device 09:01.0
> (XEN) PCI add device 09:01.1
> (XEN) PCI add device 09:01.2
> (XEN) PCI add device 0a:00.0
> (XEN) printk: 11 messages suppressed.
> (XEN) mm.c:3847:d10 Bad page 00000000001beab4: ed=ffff830151210000(10),
> sd=ffff830151210000, caf=8000000000000002, taf=7400000000000001
> (XEN) mm.c:3847:d10 Bad page 00000000001beab4: ed=ffff830151210000(10),
> sd=ffff830151210000, caf=8000000000000002, taf=7400000000000001
> (XEN) mm.c:3847:d10 Bad page 00000000001beab4: ed=ffff830151210000(10),
> sd=ffff830151210000, caf=8000000000000002, taf=7400000000000001
> (XEN) mm.c:3847:d10 Bad page 00000000001beab4: ed=ffff830151210000(10),
> sd=ffff830151210000, caf=8000000000000002, taf=7400000000000001
> (XEN) mm.c:3847:d10 Bad page 00000000001beab4: ed=ffff830151210000(10),
> sd=ffff830151210000, caf=8000000000000002, taf=7400000000000001
> (XEN) mm.c:3847:d10 Bad page 00000000001beab4: ed=ffff830151210000(10),
> sd=ffff830151210000, caf=8000000000000002, taf=7400000000000001
> host : serveerstertje
> release : 2.6.31.13
> version : #3 SMP Fri Apr 16 15:40:16 CEST 2010
> machine : x86_64
> nr_cpus : 2
> nr_nodes : 1
> cores_per_socket : 2
> threads_per_core : 1
> cpu_mhz : 2500
> hw_caps :
> 178bf3ff:ebd3fbff:00000000:00000010:00002001:00000000:0000011f:00000000
> virt_caps : hvm
> total_memory : 6881
> free_memory : 2995
> node_to_cpu : node0:0-1
> node_to_memory : node0:2995
> node_to_dma32_mem : node0:2731
> max_node_id : 0
> xen_major : 4
> xen_minor : 0
> xen_extra : .1-rc1-pre
> xen_caps : xen-3.0-x86_64 xen-3.0-x86_32p hvm-3.0-x86_32
> hvm-3.0-x86_32p hvm-3.0-x86_64
> xen_scheduler : credit
> xen_pagesize : 4096
> platform_params : virt_start=0xffff800000000000
> xen_changeset : Mon Apr 12 18:29:36 2010 +0100 21107:11010cf627c8
> xen_commandline : dom0_mem=768M loglvl=all loglvl_guest=all
> cc_compiler : gcc version 4.3.2 (Debian 4.3.2-1.1)
> cc_compile_by : root
> cc_compile_domain :
> cc_compile_date : Fri Apr 16 16:39:44 CEST 2010
> xend_config_format : 4
> _______________________________________________
> Xen-devel mailing list
> Xen-devel@xxxxxxxxxxxxxxxxxxx
> http://lists.xensource.com/xen-devel
_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-devel
|
Home