Initializing cgroup subsys cpuset Initializing cgroup subsys cpu Linux version 2.6.32-pvops-dom0 (ewalsh@moss-flapper) (gcc version 4.4.3 20100127 (Red Hat 4.4.3-4) (GCC) ) #23 SMP Thu Mar 25 19:11:01 EDT 2010 Command line: ro root=/dev/sda2 LANG=en_US.UTF-8 SYSFONT=latarcyrheb-sun16 KEYBOARDTYPE=pc KEYTABLE=us console=hvc0 early_printk=xen debug initcall_debug drm.debug=255 KERNEL supported cpus: Intel GenuineIntel AMD AuthenticAMD Centaur CentaurHauls xen_release_chunk: looking at area pfn 9a-a0: 6 pages freed xen_release_chunk: looking at area pfn c0000-e0000: 131072 pages freed xen_release_chunk: looking at area pfn f0000-fec00: 60416 pages freed xen_release_chunk: looking at area pfn fed01-fed20: 31 pages freed xen_release_chunk: looking at area pfn feda0-fee00: 96 pages freed xen_release_chunk: looking at area pfn fef00-ffb00: 3072 pages freed released 194693 pages of unused memory BIOS-provided physical RAM map: Xen: 0000000000000000 - 000000000009a000 (usable) Xen: 00000000000a0000 - 0000000000100000 (reserved) Xen: 0000000000100000 - 00000000bdbffc00 (usable) Xen: 00000000bdbffc00 - 00000000bdc53c00 (ACPI NVS) Xen: 00000000bdc53c00 - 00000000bdc55c00 (ACPI data) Xen: 00000000bdc55c00 - 00000000c0000000 (reserved) Xen: 00000000e0000000 - 00000000f0000000 (reserved) Xen: 00000000fec00000 - 00000000fed00400 (reserved) Xen: 00000000fed20000 - 00000000feda0000 (reserved) Xen: 00000000fee00000 - 00000000fef00000 (reserved) Xen: 00000000ffb00000 - 0000000100000000 (reserved) Xen: 0000000100000000 - 00000001e7ea2000 (usable) DMI 2.5 present. last_pfn = 0x1e7ea2 max_arch_pfn = 0x400000000 last_pfn = 0xbdbff max_arch_pfn = 0x400000000 initial memory mapped : 0 - 20000000 init_memory_mapping: 0000000000000000-00000000bdbff000 0000000000 - 00bdbff000 page 4k kernel direct mapping tables up to bdbff000 @ 100000-6f2000 init_memory_mapping: 0000000100000000-00000001e7ea2000 0100000000 - 01e7ea2000 page 4k kernel direct mapping tables up to 1e7ea2000 @ 4659000-55a2000 RAMDISK: 01a12000 - 036f0400 ACPI: RSDP 00000000000fec00 00024 (v02 DELL ) ACPI: XSDT 00000000000fc7cc 0009C (v01 DELL B10K 00000015 ASL 00000061) ACPI: FACP 00000000000fc8fc 000F4 (v03 DELL B10K 00000015 ASL 00000061) ACPI: DSDT 00000000ffe9da54 054AD (v01 DELL dt_ex 00001000 INTL 20050624) ACPI: FACS 00000000bdbffc00 00040 ACPI: SSDT 00000000ffea3020 000AA (v01 DELL st_ex 00001000 INTL 20050624) ACPI: APIC 00000000000fc9f0 00092 (v01 DELL B10K 00000015 ASL 00000061) ACPI: BOOT 00000000000fca82 00028 (v01 DELL B10K 00000015 ASL 00000061) ACPI: ASF! 00000000000fcaaa 00096 (v32 DELL B10K 00000015 ASL 00000061) ACPI: MCFG 00000000000fcb40 0003E (v01 DELL B10K 00000015 ASL 00000061) ACPI: HPET 00000000000fcb7e 00038 (v01 DELL B10K 00000015 ASL 00000061) ACPI: TCPA 00000000000fcdda 00032 (v01 DELL B10K 00000015 ASL 00000061) ACPI: ____ 00000000000fce0c 00030 (v01 DELL B10K 00000015 ASL 00000061) ACPI: SLIC 00000000000fcbb6 00176 (v01 DELL B10K 00000015 ASL 00000061) ACPI: SSDT 00000000bdbffc40 001F9 (v01 DpgPmm Cpu0Ist 00000011 INTL 20050624) ACPI: SSDT 00000000bdc00049 001F9 (v01 DpgPmm Cpu1Ist 00000011 INTL 20050624) ACPI: SSDT 00000000bdc00452 001F9 (v01 DpgPmm Cpu2Ist 00000011 INTL 20050624) ACPI: SSDT 00000000bdc0085b 001F9 (v01 DpgPmm Cpu3Ist 00000011 INTL 20050624) ACPI: SSDT 00000000bdc00c64 00190 (v01 DpgPmm CpuPm 00000010 INTL 20050624) ACPI: Local APIC address 0xfee00000 No NUMA configuration found Faking a node at 0000000000000000-00000001e7ea2000 Bootmem setup node 0 0000000000000000-00000001e7ea2000 NODE_DATA [0000000000008000 - 000000000001ffff] bootmap [0000000000020000 - 000000000005cfd7] pages 3d (9 early reservations) ==> bootmem [0000000000 - 01e7ea2000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] #1 [0004632000 - 0004659000] XEN PAGETABLES ==> [0004632000 - 0004659000] #2 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] #3 [0001000000 - 00019f1188] TEXT DATA BSS ==> [0001000000 - 00019f1188] #4 [0001a12000 - 00036f0400] RAMDISK ==> [0001a12000 - 00036f0400] #5 [00036f1000 - 0004632000] XEN START INFO ==> [00036f1000 - 0004632000] #6 [00019f2000 - 00019f21f0] BRK ==> [00019f2000 - 00019f21f0] #7 [0000100000 - 00006c8000] PGTABLE ==> [0000100000 - 00006c8000] #8 [0004659000 - 0004d9d000] PGTABLE ==> [0004659000 - 0004d9d000] found SMP MP-table at [ffff8800000fe710] fe710 Zone PFN ranges: DMA 0x00000000 -> 0x00001000 DMA32 0x00001000 -> 0x00100000 Normal 0x00100000 -> 0x001e7ea2 Movable zone start PFN for each node early_node_map[3] active PFN ranges 0: 0x00000000 -> 0x0000009a 0: 0x00000100 -> 0x000bdbff 0: 0x00100000 -> 0x001e7ea2 On node 0 totalpages: 1727035 DMA zone: 56 pages used for memmap DMA zone: 1483 pages reserved DMA zone: 2455 pages, LIFO batch:0 DMA32 zone: 14280 pages used for memmap DMA32 zone: 758839 pages, LIFO batch:31 Normal zone: 12988 pages used for memmap Normal zone: 936934 pages, LIFO batch:31 ACPI: PM-Timer IO Port: 0x808 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled) ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled) ACPI: LAPIC (acpi_id[0x06] lapic_id[0x01] disabled) ACPI: LAPIC (acpi_id[0x07] lapic_id[0x02] disabled) ACPI: LAPIC (acpi_id[0x08] lapic_id[0x03] disabled) ACPI: LAPIC_NMI (acpi_id[0xff] high level lint[0x1]) ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 8, version 0, address 0xfec00000, GSI 0-0 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ERROR: Unable to locate IOAPIC for GSI 2 ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ERROR: Unable to locate IOAPIC for GSI 9 Using ACPI (MADT) for SMP configuration information ACPI: HPET id: 0x8086a701 base: 0xfed00000 SMP: Allowing 4 CPUs, 0 hotplug CPUs nr_irqs_gsi: 256 PM: Registered nosave memory: 000000000009a000 - 00000000000a0000 PM: Registered nosave memory: 00000000000a0000 - 0000000000100000 PM: Registered nosave memory: 00000000bdbff000 - 00000000bdc00000 PM: Registered nosave memory: 00000000bdc00000 - 00000000bdc53000 PM: Registered nosave memory: 00000000bdc53000 - 00000000bdc54000 PM: Registered nosave memory: 00000000bdc54000 - 00000000bdc55000 PM: Registered nosave memory: 00000000bdc55000 - 00000000bdc56000 PM: Registered nosave memory: 00000000bdc56000 - 00000000c0000000 PM: Registered nosave memory: 00000000c0000000 - 00000000e0000000 PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000 PM: Registered nosave memory: 00000000f0000000 - 00000000fec00000 PM: Registered nosave memory: 00000000fec00000 - 00000000fed00000 PM: Registered nosave memory: 00000000fed00000 - 00000000fed20000 PM: Registered nosave memory: 00000000fed20000 - 00000000feda0000 PM: Registered nosave memory: 00000000feda0000 - 00000000fee00000 PM: Registered nosave memory: 00000000fee00000 - 00000000fef00000 PM: Registered nosave memory: 00000000fef00000 - 00000000ffb00000 PM: Registered nosave memory: 00000000ffb00000 - 0000000100000000 Allocating PCI resources starting at c0000000 (gap: c0000000:20000000) Booting paravirtualized kernel on Xen Xen version: 4.0.0-rc8-pre (preserve-AD) (dom0) NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1 PERCPU: Embedded 28 pages/cpu @ffff880028038000 s85848 r8192 d20648 u114688 pcpu-alloc: s85848 r8192 d20648 u114688 alloc=28*4096 pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 trying to map vcpu_info 0 at ffff880028043020, mfn 20a472, offset 32 cpu 0 using vcpu_info at ffff880028043020 trying to map vcpu_info 1 at ffff88002805f020, mfn 20a48e, offset 32 cpu 1 using vcpu_info at ffff88002805f020 trying to map vcpu_info 2 at ffff88002807b020, mfn 20a4aa, offset 32 cpu 2 using vcpu_info at ffff88002807b020 trying to map vcpu_info 3 at ffff880028097020, mfn 20a4c6, offset 32 cpu 3 using vcpu_info at ffff880028097020 Xen: using vcpu_info placement Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1698228 Policy zone: Normal Kernel command line: ro root=/dev/sda2 LANG=en_US.UTF-8 SYSFONT=latarcyrheb-sun16 KEYBOARDTYPE=pc KEYTABLE=us console=hvc0 early_printk=xen debug initcall_debug drm.debug=255 PID hash table entries: 4096 (order: 3, 32768 bytes) Initializing CPU#0 DMA: Placing 64MB software IO TLB between ffff880020000000 - ffff880024000000 DMA: software IO TLB at phys 0x20000000 - 0x24000000 xen_swiotlb_fixup: buf=ffff880020000000 size=67108864 xen_swiotlb_fixup: buf=ffff880024060000 size=32768 Memory: 6677292k/7993992k available (4556k kernel code, 1085852k absent, 230848k reserved, 2978k data, 1348k init) SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 Hierarchical RCU implementation. NR_IRQS:4352 nr_irqs:1280 xen: --> irq=0 xen: --> irq=1 xen: --> irq=2 xen: --> irq=3 xen: --> irq=4 xen: --> irq=5 xen: --> irq=6 xen: --> irq=7 xen: --> irq=8 xen: --> irq=9 xen: --> irq=10 xen: --> irq=11 xen: --> irq=12 xen: --> irq=13 xen: --> irq=14 xen: --> irq=15 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) xen: sci override: source_irq=9 global_irq=9 trigger=c polarity=1 xen: registering gsi 9 triggering 0 polarity 0 xen_allocate_pirq: returning irq 9 for gsi 9 xen: --> irq=9 Already setup the GSI :9 xen: acpi sci 9 Console: colour VGA+ 80x25 console [hvc0] enabled allocated 69468160 bytes of page_cgroup please try 'cgroup_disable=memory' option if you don't want memory cgroups Xen: using vcpuop timer interface installing Xen timer for CPU 0 alloc irq_desc for 1279 on node 0 alloc kstat_irqs on node 0 Detected 2992.582 MHz processor. Calibrating delay loop (skipped), value calculated using timer frequency.. 5985.16 BogoMIPS (lpj=2992582) Security Framework initialized SELinux: Initializing. SELinux: Starting in permissive mode Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) Mount-cache hash table entries: 256 Initializing cgroup subsys ns Initializing cgroup subsys cpuacct Initializing cgroup subsys memory Initializing cgroup subsys devices Initializing cgroup subsys freezer Initializing cgroup subsys net_cls CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 6144K CPU 0/0x0 -> Node 0 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 Performance Events: unsupported p6 CPU model 23 no PMU driver, software events only. SMP alternatives: switching to UP code ACPI: Core revision 20090903 alloc irq_desc for 1278 on node 0 alloc kstat_irqs on node 0 alloc irq_desc for 1277 on node 0 alloc kstat_irqs on node 0 alloc irq_desc for 1276 on node 0 alloc kstat_irqs on node 0 alloc irq_desc for 1275 on node 0 alloc kstat_irqs on node 0 calling migration_init+0x0/0x59 @ 1 initcall migration_init+0x0/0x59 returned 0 after 976 usecs calling spawn_ksoftirqd+0x0/0x5a @ 1 initcall spawn_ksoftirqd+0x0/0x5a returned 0 after 0 usecs calling init_call_single_data+0x0/0x89 @ 1 initcall init_call_single_data+0x0/0x89 returned 0 after 0 usecs calling relay_init+0x0/0x14 @ 1 initcall relay_init+0x0/0x14 returned 0 after 0 usecs calling mce_amd_init+0x0/0x33 @ 1 initcall mce_amd_init+0x0/0x33 returned 0 after 0 usecs installing Xen timer for CPU 1 alloc irq_desc for 1274 on node 0 alloc kstat_irqs on node 0 SMP alternatives: switching to SMP code alloc irq_desc for 1273 on node 0 alloc kstat_irqs on node 0 alloc irq_desc for 1272 on node 0 alloc kstat_irqs on node 0 alloc irq_desc for 1271 on node 0 alloc kstat_irqs on node 0 alloc irq_desc for 1270 on node 0 alloc kstat_irqs on node 0 Initializing CPU#1 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 6144K CPU 1/0x0 -> Node 0 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 installing Xen timer for CPU 2 alloc irq_desc for 1269 on node 0 alloc kstat_irqs on node 0 alloc irq_desc for 1268 on node 0 alloc kstat_irqs on node 0 alloc irq_desc for 1267 on node 0 alloc kstat_irqs on node 0 alloc irq_desc for 1266 on node 0 alloc kstat_irqs on node 0 alloc irq_desc for 1265 on node 0 alloc kstat_irqs on node 0 Initializing CPU#2 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 6144K CPU 2/0x0 -> Node 0 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 2 installing Xen timer for CPU 3 alloc irq_desc for 1264 on node 0 alloc kstat_irqs on node 0 alloc irq_desc for 1263 on node 0 alloc kstat_irqs on node 0 alloc irq_desc for 1262 on node 0 alloc kstat_irqs on node 0 alloc irq_desc for 1261 on node 0 alloc kstat_irqs on node 0 alloc irq_desc for 1260 on node 0 alloc kstat_irqs on node 0 Initializing CPU#3 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 6144K CPU 3/0x0 -> Node 0 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 3 Brought up 4 CPUs CPU0 attaching sched-domain: domain 0: span 0-3 level CPU groups: 0 1 2 3 CPU1 attaching sched-domain: domain 0: span 0-3 level CPU groups: 1 2 3 0 CPU2 attaching sched-domain: domain 0: span 0-3 level CPU groups: 2 3 0 1 CPU3 attaching sched-domain: domain 0: span 0-3 level CPU groups: 3 0 1 2 calling init_mmap_min_addr+0x0/0x26 @ 1 initcall init_mmap_min_addr+0x0/0x26 returned 0 after 0 usecs calling init_cpufreq_transition_notifier_list+0x0/0x1b @ 1 initcall init_cpufreq_transition_notifier_list+0x0/0x1b returned 0 after 0 usecs calling net_ns_init+0x0/0xfe @ 1 initcall net_ns_init+0x0/0xfe returned 0 after 0 usecs calling e820_mark_nvs_memory+0x0/0x40 @ 1 initcall e820_mark_nvs_memory+0x0/0x40 returned 0 after 0 usecs calling cpufreq_tsc+0x0/0x28 @ 1 initcall cpufreq_tsc+0x0/0x28 returned 0 after 0 usecs calling pci_reboot_init+0x0/0x14 @ 1 initcall pci_reboot_init+0x0/0x14 returned 0 after 0 usecs calling init_lapic_sysfs+0x0/0x2d @ 1 initcall init_lapic_sysfs+0x0/0x2d returned 0 after 0 usecs calling alloc_frozen_cpus+0x0/0x8 @ 1 initcall alloc_frozen_cpus+0x0/0x8 returned 0 after 0 usecs calling sysctl_init+0x0/0x32 @ 1 initcall sysctl_init+0x0/0x32 returned 0 after 0 usecs calling ksysfs_init+0x0/0xc0 @ 1 initcall ksysfs_init+0x0/0xc0 returned 0 after 0 usecs calling async_init+0x0/0x60 @ 1 initcall async_init+0x0/0x60 returned 0 after 976 usecs calling init_jiffies_clocksource+0x0/0x12 @ 1 initcall init_jiffies_clocksource+0x0/0x12 returned 0 after 0 usecs calling pm_init+0x0/0x34 @ 1 initcall pm_init+0x0/0x34 returned 0 after 0 usecs calling pm_disk_init+0x0/0x19 @ 1 initcall pm_disk_init+0x0/0x19 returned 0 after 0 usecs calling swsusp_header_init+0x0/0x2c @ 1 initcall swsusp_header_init+0x0/0x2c returned 0 after 0 usecs calling init_zero_pfn+0x0/0x35 @ 1 initcall init_zero_pfn+0x0/0x35 returned 0 after 0 usecs calling filelock_init+0x0/0x2e @ 1 initcall filelock_init+0x0/0x2e returned 0 after 0 usecs calling init_misc_binfmt+0x0/0x41 @ 1 initcall init_misc_binfmt+0x0/0x41 returned 0 after 0 usecs calling init_script_binfmt+0x0/0x14 @ 1 initcall init_script_binfmt+0x0/0x14 returned 0 after 0 usecs calling init_elf_binfmt+0x0/0x14 @ 1 initcall init_elf_binfmt+0x0/0x14 returned 0 after 0 usecs calling init_compat_elf_binfmt+0x0/0x14 @ 1 initcall init_compat_elf_binfmt+0x0/0x14 returned 0 after 0 usecs calling debugfs_init+0x0/0x5c @ 1 initcall debugfs_init+0x0/0x5c returned 0 after 0 usecs calling securityfs_init+0x0/0x53 @ 1 initcall securityfs_init+0x0/0x53 returned 0 after 0 usecs calling random32_init+0x0/0xd8 @ 1 initcall random32_init+0x0/0xd8 returned 0 after 0 usecs calling gnttab_init+0x0/0x176 @ 1 Grant table initialized initcall gnttab_init+0x0/0x176 returned 0 after 0 usecs calling regulator_init+0x0/0x2e @ 1 regulator: core version 0.5 initcall regulator_init+0x0/0x2e returned 0 after 0 usecs calling early_resume_init+0x0/0x19e @ 1 Time: 23:24:48 Date: 03/25/10 initcall early_resume_init+0x0/0x19e returned 0 after 0 usecs calling cpufreq_core_init+0x0/0x9b @ 1 initcall cpufreq_core_init+0x0/0x9b returned 0 after 0 usecs calling cpuidle_init+0x0/0x40 @ 1 initcall cpuidle_init+0x0/0x40 returned 0 after 0 usecs calling sock_init+0x0/0x5e @ 1 initcall sock_init+0x0/0x5e returned 0 after 0 usecs calling netpoll_init+0x0/0x31 @ 1 initcall netpoll_init+0x0/0x31 returned 0 after 0 usecs calling netlink_proto_init+0x0/0x143 @ 1 NET: Registered protocol family 16 initcall netlink_proto_init+0x0/0x143 returned 0 after 0 usecs calling bdi_class_init+0x0/0x41 @ 1 initcall bdi_class_init+0x0/0x41 returned 0 after 0 usecs calling kobject_uevent_init+0x0/0x54 @ 1 initcall kobject_uevent_init+0x0/0x54 returned 0 after 0 usecs calling pcibus_class_init+0x0/0x19 @ 1 initcall pcibus_class_init+0x0/0x19 returned 0 after 0 usecs calling pci_driver_init+0x0/0x12 @ 1 initcall pci_driver_init+0x0/0x12 returned 0 after 0 usecs calling backlight_class_init+0x0/0x5d @ 1 initcall backlight_class_init+0x0/0x5d returned 0 after 0 usecs calling video_output_class_init+0x0/0x19 @ 1 initcall video_output_class_init+0x0/0x19 returned 0 after 0 usecs calling xenbus_probe_init+0x0/0x298 @ 1 alloc irq_desc for 1259 on node 0 alloc kstat_irqs on node 0 xenbus_probe_init ok initcall xenbus_probe_init+0x0/0x298 returned 0 after 0 usecs calling tty_class_init+0x0/0x38 @ 1 initcall tty_class_init+0x0/0x38 returned 0 after 0 usecs calling vtconsole_class_init+0x0/0xc2 @ 1 initcall vtconsole_class_init+0x0/0xc2 returned 0 after 0 usecs calling register_node_type+0x0/0x46 @ 1 initcall register_node_type+0x0/0x46 returned 0 after 0 usecs calling i2c_init+0x0/0x6a @ 1 initcall i2c_init+0x0/0x6a returned 0 after 0 usecs calling amd_postcore_init+0x0/0x77 @ 1 initcall amd_postcore_init+0x0/0x77 returned 0 after 0 usecs calling arch_kdebugfs_init+0x0/0x24 @ 1 initcall arch_kdebugfs_init+0x0/0x24 returned 0 after 0 usecs calling mtrr_if_init+0x0/0x61 @ 1 initcall mtrr_if_init+0x0/0x61 returned 0 after 0 usecs calling ffh_cstate_init+0x0/0x2a @ 1 initcall ffh_cstate_init+0x0/0x2a returned 0 after 0 usecs calling acpi_pci_init+0x0/0x5c @ 1 ACPI FADT declares the system doesn't support PCIe ASPM, so disable it ACPI: bus type pci registered initcall acpi_pci_init+0x0/0x5c returned 0 after 0 usecs calling register_xen_pci_notifier+0x0/0x24 @ 1 initcall register_xen_pci_notifier+0x0/0x24 returned 0 after 0 usecs calling setup_vcpu_hotplug_event+0x0/0x22 @ 1 initcall setup_vcpu_hotplug_event+0x0/0x22 returned 0 after 0 usecs calling dmi_id_init+0x0/0x2f1 @ 1 initcall dmi_id_init+0x0/0x2f1 returned 0 after 0 usecs calling dma_bus_init+0x0/0x3f @ 1 initcall dma_bus_init+0x0/0x3f returned 0 after 0 usecs calling dma_channel_table_init+0x0/0xaa @ 1 initcall dma_channel_table_init+0x0/0xaa returned 0 after 0 usecs calling pci_arch_init+0x0/0x60 @ 1 PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 PCI: MCFG area at e0000000 reserved in E820 PCI: Using MMCONFIG at e0000000 - efffffff PCI: Using configuration type 1 for base access initcall pci_arch_init+0x0/0x60 returned 0 after 40032 usecs calling topology_init+0x0/0x9d @ 1 initcall topology_init+0x0/0x9d returned 0 after 0 usecs calling mtrr_init_finialize+0x0/0x3d @ 1 initcall mtrr_init_finialize+0x0/0x3d returned 0 after 0 usecs calling param_sysfs_init+0x0/0x201 @ 1 initcall param_sysfs_init+0x0/0x201 returned 0 after 976 usecs calling pm_sysrq_init+0x0/0x19 @ 1 initcall pm_sysrq_init+0x0/0x19 returned 0 after 0 usecs calling audit_watch_init+0x0/0x2f @ 1 initcall audit_watch_init+0x0/0x2f returned 0 after 0 usecs calling init_slow_work+0x0/0x37 @ 1 initcall init_slow_work+0x0/0x37 returned 0 after 0 usecs calling default_bdi_init+0x0/0xb2 @ 1 initcall default_bdi_init+0x0/0xb2 returned 0 after 0 usecs calling init_bio+0x0/0xcd @ 1 bio: create slab at 0 initcall init_bio+0x0/0xcd returned 0 after 0 usecs calling fsnotify_init+0x0/0x12 @ 1 initcall fsnotify_init+0x0/0x12 returned 0 after 0 usecs calling fsnotify_notification_init+0x0/0xf0 @ 1 initcall fsnotify_notification_init+0x0/0xf0 returned 0 after 0 usecs calling cryptomgr_init+0x0/0x12 @ 1 initcall cryptomgr_init+0x0/0x12 returned 0 after 0 usecs calling blk_settings_init+0x0/0x2a @ 1 initcall blk_settings_init+0x0/0x2a returned 0 after 0 usecs calling blk_ioc_init+0x0/0x2a @ 1 initcall blk_ioc_init+0x0/0x2a returned 0 after 976 usecs calling blk_softirq_init+0x0/0x6e @ 1 initcall blk_softirq_init+0x0/0x6e returned 0 after 0 usecs calling blk_iopoll_setup+0x0/0x6e @ 1 initcall blk_iopoll_setup+0x0/0x6e returned 0 after 0 usecs calling genhd_device_init+0x0/0x7b @ 1 initcall genhd_device_init+0x0/0x7b returned 0 after 0 usecs calling blk_dev_integrity_init+0x0/0x2a @ 1 initcall blk_dev_integrity_init+0x0/0x2a returned 0 after 0 usecs calling pci_slot_init+0x0/0x46 @ 1 initcall pci_slot_init+0x0/0x46 returned 0 after 0 usecs calling fbmem_init+0x0/0x98 @ 1 initcall fbmem_init+0x0/0x98 returned 0 after 0 usecs calling acpi_init+0x0/0x265 @ 1 ACPI: EC: Look up EC in DSDT ACPI: BIOS _OSI(Linux) query ignored ACPI: Interpreter enabled ACPI: (supports S0 S1 S3 S4 S5) ACPI: Using IOAPIC for interrupt routing initcall acpi_init+0x0/0x265 returned 0 after 236324 usecs calling dock_init+0x0/0x8d @ 1 ACPI: ACPI Dock Station Driver: 1 docks/bays found initcall dock_init+0x0/0x8d returned 0 after 4882 usecs calling acpi_pci_root_init+0x0/0x28 @ 1 ACPI: PCI Root Bridge [PCI0] (0000:00) pci 0000:00:01.0: PME# supported from D0 D3hot D3cold pci 0000:00:01.0: PME# disabled pci 0000:00:02.0: reg 10 64bit mmio: [0xfe800000-0xfebfffff] pci 0000:00:02.0: reg 18 64bit mmio pref: [0xd0000000-0xdfffffff] pci 0000:00:02.0: reg 20 io port: [0xec90-0xec97] pci 0000:00:02.1: reg 10 64bit mmio: [0xfe700000-0xfe7fffff] pci 0000:00:03.0: reg 10 64bit mmio: [0xfeda6000-0xfeda600f] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold pci 0000:00:03.0: PME# disabled pci 0000:00:03.2: reg 10 io port: [0xfe80-0xfe87] pci 0000:00:03.2: reg 14 io port: [0xfe90-0xfe93] pci 0000:00:03.2: reg 18 io port: [0xfea0-0xfea7] pci 0000:00:03.2: reg 1c io port: [0xfeb0-0xfeb3] pci 0000:00:03.2: reg 20 io port: [0xfef0-0xfeff] pci 0000:00:03.3: reg 10 io port: [0xec98-0xec9f] pci 0000:00:03.3: reg 14 32bit mmio: [0xfe6d8000-0xfe6d8fff] pci 0000:00:19.0: reg 10 32bit mmio: [0xfe6e0000-0xfe6fffff] pci 0000:00:19.0: reg 14 32bit mmio: [0xfe6d9000-0xfe6d9fff] pci 0000:00:19.0: reg 18 io port: [0xecc0-0xecdf] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold pci 0000:00:19.0: PME# disabled pci 0000:00:1a.0: reg 20 io port: [0xff20-0xff3f] pci 0000:00:1a.1: reg 20 io port: [0xff00-0xff1f] pci 0000:00:1a.2: reg 20 io port: [0xfc00-0xfc1f] pci 0000:00:1a.7: reg 10 32bit mmio: [0xfe6da000-0xfe6da3ff] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold pci 0000:00:1a.7: PME# disabled pci 0000:00:1b.0: reg 10 64bit mmio: [0xfe6dc000-0xfe6dffff] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold pci 0000:00:1b.0: PME# disabled pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold pci 0000:00:1c.0: PME# disabled pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold pci 0000:00:1c.1: PME# disabled pci 0000:00:1d.0: reg 20 io port: [0xff80-0xff9f] pci 0000:00:1d.1: reg 20 io port: [0xff60-0xff7f] pci 0000:00:1d.2: reg 20 io port: [0xff40-0xff5f] pci 0000:00:1d.7: reg 10 32bit mmio: [0xff980000-0xff9803ff] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold pci 0000:00:1d.7: PME# disabled pci 0000:00:1f.2: reg 10 io port: [0xfe00-0xfe07] pci 0000:00:1f.2: reg 14 io port: [0xfe10-0xfe13] pci 0000:00:1f.2: reg 18 io port: [0xfe20-0xfe27] pci 0000:00:1f.2: reg 1c io port: [0xfe30-0xfe33] pci 0000:00:1f.2: reg 20 io port: [0xfec0-0xfedf] pci 0000:00:1f.2: reg 24 32bit mmio: [0xff970000-0xff9707ff] pci 0000:00:1f.2: PME# supported from D3hot pci 0000:00:1f.2: PME# disabled pci 0000:00:1f.3: reg 10 64bit mmio: [0xfe6db000-0xfe6db0ff] pci 0000:00:1f.3: reg 20 io port: [0xece0-0xecff] pci 0000:00:01.0: bridge 32bit mmio: [0xfe500000-0xfe5fffff] pci 0000:00:1c.0: bridge 32bit mmio: [0xfe400000-0xfe4fffff] pci 0000:00:1c.1: bridge 32bit mmio: [0xfe300000-0xfe3fffff] pci 0000:00:1e.0: transparent bridge ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI4._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI2._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI3._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT] initcall acpi_pci_root_init+0x0/0x28 returned 0 after 1913086 usecs calling acpi_pci_link_init+0x0/0x43 @ 1 ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 9 10 11 12 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *9 10 11 12 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 *10 11 12 15) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 15) *0, disabled. ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 5 6 7 9 10 11 12 15) ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 9 10 11 12 15) ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 *10 11 12 15) initcall acpi_pci_link_init+0x0/0x43 returned 0 after 5859 usecs calling pnp_init+0x0/0x12 @ 1 initcall pnp_init+0x0/0x12 returned 0 after 0 usecs calling setup_shutdown_event+0x0/0x14 @ 1 initcall setup_shutdown_event+0x0/0x14 returned 0 after 0 usecs calling xen_pcpu_init+0x0/0xa7 @ 1 sync cpu 0 get result 1 max_id 3 sync cpu 1 get result 1 max_id 3 sync cpu 2 get result 1 max_id 3 sync cpu 3 get result 1 max_id 3 alloc irq_desc for 1258 on node 0 alloc kstat_irqs on node 0 initcall xen_pcpu_init+0x0/0xa7 returned 1258 after 0 usecs initcall xen_pcpu_init+0x0/0xa7 returned with error code 1258 calling xenbus_probe_backend_init+0x0/0x90 @ 1 xenbus_probe_backend_init bus registered ok initcall xenbus_probe_backend_init+0x0/0x90 returned 0 after 0 usecs calling xenbus_probe_frontend_init+0x0/0x90 @ 1 xenbus_probe_frontend_init bus registered ok initcall xenbus_probe_frontend_init+0x0/0x90 returned 0 after 0 usecs calling balloon_init+0x0/0x20c @ 1 xen_balloon: Initialising balloon driver with page order 0. initcall balloon_init+0x0/0x20c returned 0 after 0 usecs calling xen_acpi_processor_extcntl_init+0x0/0x4f @ 1 initcall xen_acpi_processor_extcntl_init+0x0/0x4f returned 0 after 0 usecs calling misc_init+0x0/0xb7 @ 1 initcall misc_init+0x0/0xb7 returned 0 after 0 usecs calling vga_arb_device_init+0x0/0x80 @ 1 vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none vgaarb: loaded initcall vga_arb_device_init+0x0/0x80 returned 0 after 0 usecs calling cn_init+0x0/0xee @ 1 initcall cn_init+0x0/0xee returned 0 after 0 usecs calling init_scsi+0x0/0x91 @ 1 SCSI subsystem initialized initcall init_scsi+0x0/0x91 returned 0 after 0 usecs calling ata_init+0x0/0x364 @ 1 libata version 3.00 loaded. initcall ata_init+0x0/0x364 returned 0 after 976 usecs calling phy_init+0x0/0x2e @ 1 initcall phy_init+0x0/0x2e returned 0 after 0 usecs calling init_pcmcia_cs+0x0/0x36 @ 1 initcall init_pcmcia_cs+0x0/0x36 returned 0 after 0 usecs calling usb_init+0x0/0x1a9 @ 1 usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb initcall usb_init+0x0/0x1a9 returned 0 after 0 usecs calling serio_init+0x0/0x86 @ 1 initcall serio_init+0x0/0x86 returned 0 after 0 usecs calling input_init+0x0/0x13d @ 1 initcall input_init+0x0/0x13d returned 0 after 0 usecs calling rtc_init+0x0/0x71 @ 1 initcall rtc_init+0x0/0x71 returned 0 after 0 usecs calling power_supply_class_init+0x0/0x38 @ 1 initcall power_supply_class_init+0x0/0x38 returned 0 after 0 usecs calling thermal_init+0x0/0x3f @ 1 initcall thermal_init+0x0/0x3f returned 0 after 0 usecs calling md_init+0x0/0xd0 @ 1 initcall md_init+0x0/0xd0 returned 0 after 0 usecs calling leds_init+0x0/0x40 @ 1 initcall leds_init+0x0/0x40 returned 0 after 0 usecs calling pci_subsys_init+0x0/0x118 @ 1 PCI: Using ACPI for IRQ routing initcall pci_subsys_init+0x0/0x118 returned 0 after 0 usecs calling proto_init+0x0/0x12 @ 1 initcall proto_init+0x0/0x12 returned 0 after 0 usecs calling net_dev_init+0x0/0x175 @ 1 initcall net_dev_init+0x0/0x175 returned 0 after 0 usecs calling neigh_init+0x0/0x71 @ 1 initcall neigh_init+0x0/0x71 returned 0 after 0 usecs calling fib_rules_init+0x0/0xa6 @ 1 initcall fib_rules_init+0x0/0xa6 returned 0 after 0 usecs calling pktsched_init+0x0/0xd0 @ 1 initcall pktsched_init+0x0/0xd0 returned 0 after 0 usecs calling tc_filter_init+0x0/0x4c @ 1 initcall tc_filter_init+0x0/0x4c returned 0 after 0 usecs calling tc_action_init+0x0/0x4c @ 1 initcall tc_action_init+0x0/0x4c returned 0 after 0 usecs calling genl_init+0x0/0x8f @ 1 initcall genl_init+0x0/0x8f returned 0 after 0 usecs calling cipso_v4_init+0x0/0x61 @ 1 initcall cipso_v4_init+0x0/0x61 returned 0 after 0 usecs calling wireless_nlevent_init+0x0/0x12 @ 1 initcall wireless_nlevent_init+0x0/0x12 returned 0 after 0 usecs calling netlbl_init+0x0/0x81 @ 1 NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default initcall netlbl_init+0x0/0x81 returned 0 after 0 usecs calling sysctl_init+0x0/0x48 @ 1 initcall sysctl_init+0x0/0x48 returned 0 after 0 usecs calling xen_mc_debugfs+0x0/0x118 @ 1 initcall xen_mc_debugfs+0x0/0x118 returned 0 after 0 usecs calling xen_mmu_debugfs+0x0/0x2be @ 1 initcall xen_mmu_debugfs+0x0/0x2be returned 0 after 0 usecs calling print_all_ICs+0x0/0x516 @ 1 initcall print_all_ICs+0x0/0x516 returned 0 after 0 usecs calling hpet_late_init+0x0/0xba @ 1 initcall hpet_late_init+0x0/0xba returned -19 after 0 usecs calling clocksource_done_booting+0x0/0x36 @ 1 Switching to clocksource xen initcall clocksource_done_booting+0x0/0x36 returned 0 after 1113 usecs calling init_pipe_fs+0x0/0x4c @ 1 initcall init_pipe_fs+0x0/0x4c returned 0 after 27 usecs calling eventpoll_init+0x0/0xba @ 1 initcall eventpoll_init+0x0/0xba returned 0 after 4 usecs calling anon_inode_init+0x0/0x125 @ 1 initcall anon_inode_init+0x0/0x125 returned 0 after 10 usecs calling blk_scsi_ioctl_init+0x0/0x289 @ 1 initcall blk_scsi_ioctl_init+0x0/0x289 returned 0 after 0 usecs calling acpi_event_init+0x0/0x81 @ 1 initcall acpi_event_init+0x0/0x81 returned 0 after 9 usecs calling pnpacpi_init+0x0/0x8c @ 1 pnp: PnP ACPI init ACPI: bus type pnp registered xen: registering gsi 13 triggering 1 polarity 0 xen_allocate_pirq: returning irq 13 for gsi 13 xen: --> irq=13 Already setup the GSI :13 xen: registering gsi 8 triggering 1 polarity 0 xen_allocate_pirq: returning irq 8 for gsi 8 xen: --> irq=8 Already setup the GSI :8 xen: registering gsi 7 triggering 1 polarity 0 xen_allocate_pirq: returning irq 7 for gsi 7 xen: --> irq=7 Already setup the GSI :7 xen: registering gsi 4 triggering 1 polarity 0 xen_allocate_pirq: returning irq 4 for gsi 4 xen: --> irq=4 Already setup the GSI :4 pnp: PnP ACPI: found 10 devices ACPI: ACPI bus type pnp unregistered initcall pnpacpi_init+0x0/0x8c returned 0 after 76194 usecs calling pnp_system_init+0x0/0x12 @ 1 system 00:01: ioport range 0x800-0x85f has been reserved system 00:01: ioport range 0xc00-0xc7f has been reserved system 00:01: ioport range 0x860-0x8ff has been reserved initcall pnp_system_init+0x0/0x12 returned 0 after 22 usecs calling pcistub_init+0x0/0x1a5 @ 1 initcall pcistub_init+0x0/0x1a5 returned 0 after 94 usecs calling chr_dev_init+0x0/0xc3 @ 1 initcall chr_dev_init+0x0/0xc3 returned 0 after 111 usecs calling firmware_class_init+0x0/0x79 @ 1 initcall firmware_class_init+0x0/0x79 returned 0 after 5 usecs calling init_pcmcia_bus+0x0/0x74 @ 1 initcall init_pcmcia_bus+0x0/0x74 returned 0 after 12 usecs calling cpufreq_gov_performance_init+0x0/0x12 @ 1 initcall cpufreq_gov_performance_init+0x0/0x12 returned 0 after 0 usecs calling cpufreq_gov_userspace_init+0x0/0x12 @ 1 initcall cpufreq_gov_userspace_init+0x0/0x12 returned 0 after 0 usecs calling init_acpi_pm_clocksource+0x0/0xf6 @ 1 PM-Timer failed consistency check (0x0xffffff) - aborting. initcall init_acpi_pm_clocksource+0x0/0xf6 returned -19 after 3587 usecs calling pcibios_assign_resources+0x0/0x74 @ 1 pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 pci 0000:00:01.0: IO window: disabled pci 0000:00:01.0: MEM window: 0xfe500000-0xfe5fffff pci 0000:00:01.0: PREFETCH window: disabled pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02 pci 0000:00:1c.0: IO window: 0x1000-0x1fff pci 0000:00:1c.0: MEM window: 0xfe400000-0xfe4fffff pci 0000:00:1c.0: PREFETCH window: 0x000000c0000000-0x000000c01fffff pci 0000:00:1c.1: PCI bridge, secondary bus 0000:03 pci 0000:00:1c.1: IO window: 0x2000-0x2fff pci 0000:00:1c.1: MEM window: 0xfe300000-0xfe3fffff pci 0000:00:1c.1: PREFETCH window: 0x000000c0200000-0x000000c03fffff pci 0000:00:1e.0: PCI bridge, secondary bus 0000:04 pci 0000:00:1e.0: IO window: disabled pci 0000:00:1e.0: MEM window: disabled pci 0000:00:1e.0: PREFETCH window: disabled xen: registering gsi 16 triggering 0 polarity 1 alloc irq_desc for 16 on node 0 alloc kstat_irqs on node 0 xen: --> irq=16 pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:01.0: setting latency timer to 64 xen: registering gsi 16 triggering 0 polarity 1 xen_allocate_pirq: returning irq 16 for gsi 16 xen: --> irq=16 Already setup the GSI :16 pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:1c.0: setting latency timer to 64 xen: registering gsi 17 triggering 0 polarity 1 alloc irq_desc for 17 on node 0 alloc kstat_irqs on node 0 xen: --> irq=17 pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 pci 0000:00:1c.1: setting latency timer to 64 pci 0000:00:1e.0: setting latency timer to 64 pci_bus 0000:00: resource 0 io: [0x00-0xffff] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff] pci_bus 0000:01: resource 1 mem: [0xfe500000-0xfe5fffff] pci_bus 0000:02: resource 0 io: [0x1000-0x1fff] pci_bus 0000:02: resource 1 mem: [0xfe400000-0xfe4fffff] pci_bus 0000:02: resource 2 pref mem [0xc0000000-0xc01fffff] pci_bus 0000:03: resource 0 io: [0x2000-0x2fff] pci_bus 0000:03: resource 1 mem: [0xfe300000-0xfe3fffff] pci_bus 0000:03: resource 2 pref mem [0xc0200000-0xc03fffff] pci_bus 0000:04: resource 3 io: [0x00-0xffff] pci_bus 0000:04: resource 4 mem: [0x000000-0xffffffffffffffff] initcall pcibios_assign_resources+0x0/0x74 returned 0 after 283 usecs calling sysctl_core_init+0x0/0x38 @ 1 initcall sysctl_core_init+0x0/0x38 returned 0 after 15 usecs calling inet_init+0x0/0x20a @ 1 NET: Registered protocol family 2 IP route cache hash table entries: 262144 (order: 9, 2097152 bytes) TCP established hash table entries: 524288 (order: 11, 8388608 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 524288 bind 65536) TCP reno registered initcall inet_init+0x0/0x20a returned 0 after 5498 usecs calling af_unix_init+0x0/0x55 @ 1 NET: Registered protocol family 1 initcall af_unix_init+0x0/0x55 returned 0 after 10 usecs calling pci_apply_final_quirks+0x0/0x35 @ 1 pci 0000:00:02.0: Boot video device initcall pci_apply_final_quirks+0x0/0x35 returned 0 after 208 usecs calling populate_rootfs+0x0/0xd7 @ 1 Trying to unpack rootfs image as initramfs... Freeing initrd memory: 29561k freed initcall populate_rootfs+0x0/0xd7 returned 0 after 52104 usecs calling pci_iommu_init+0x0/0x50 @ 1 DMA-API: preallocated 32768 debug entries DMA-API: debugging enabled by kernel config PCI-DMA: Using software bounce buffering for IO (SWIOTLB) DMA: Placing 64MB software IO TLB between ffff880020000000 - ffff880024000000 DMA: software IO TLB at phys 0x20000000 - 0x24000000 initcall pci_iommu_init+0x0/0x50 returned 0 after 8955 usecs calling calgary_fixup_tce_spaces+0x0/0xf9 @ 1 initcall calgary_fixup_tce_spaces+0x0/0xf9 returned -19 after 0 usecs calling i8259A_init_sysfs+0x0/0x22 @ 1 initcall i8259A_init_sysfs+0x0/0x22 returned 0 after 32 usecs calling vsyscall_init+0x0/0x6c @ 1 initcall vsyscall_init+0x0/0x6c returned 0 after 48 usecs calling sbf_init+0x0/0xe9 @ 1 Simple Boot Flag at 0x7a set to 0x1 initcall sbf_init+0x0/0xe9 returned 0 after 12 usecs calling i8237A_init_sysfs+0x0/0x22 @ 1 initcall i8237A_init_sysfs+0x0/0x22 returned 0 after 9 usecs calling add_rtc_cmos+0x0/0xa9 @ 1 initcall add_rtc_cmos+0x0/0xa9 returned 0 after 2 usecs calling cache_sysfs_init+0x0/0x59 @ 1 initcall cache_sysfs_init+0x0/0x59 returned 0 after 190 usecs calling mce_init_device+0x0/0x107 @ 1 initcall mce_init_device+0x0/0x107 returned -5 after 0 usecs initcall mce_init_device+0x0/0x107 returned with error code -5 calling threshold_init_device+0x0/0x8c @ 1 initcall threshold_init_device+0x0/0x8c returned 0 after 0 usecs calling thermal_throttle_init_device+0x0/0x93 @ 1 initcall thermal_throttle_init_device+0x0/0x93 returned 0 after 0 usecs calling msr_init+0x0/0x127 @ 1 initcall msr_init+0x0/0x127 returned 0 after 74 usecs calling cpuid_init+0x0/0x127 @ 1 initcall cpuid_init+0x0/0x127 returned 0 after 52 usecs calling ioapic_init_sysfs+0x0/0xb3 @ 1 initcall ioapic_init_sysfs+0x0/0xb3 returned 0 after 9 usecs calling add_pcspkr+0x0/0x28 @ 1 initcall add_pcspkr+0x0/0x28 returned 0 after 14 usecs calling audit_classes_init+0x0/0xaf @ 1 initcall audit_classes_init+0x0/0xaf returned 0 after 4 usecs calling init_vdso_vars+0x0/0x207 @ 1 initcall init_vdso_vars+0x0/0x207 returned 0 after 16 usecs calling ia32_binfmt_init+0x0/0x14 @ 1 initcall ia32_binfmt_init+0x0/0x14 returned 0 after 4 usecs calling sysenter_setup+0x0/0x2d0 @ 1 initcall sysenter_setup+0x0/0x2d0 returned 0 after 3 usecs calling init_sched_debug_procfs+0x0/0x2c @ 1 initcall init_sched_debug_procfs+0x0/0x2c returned 0 after 5 usecs calling proc_schedstat_init+0x0/0x22 @ 1 initcall proc_schedstat_init+0x0/0x22 returned 0 after 1 usecs calling proc_execdomains_init+0x0/0x22 @ 1 initcall proc_execdomains_init+0x0/0x22 returned 0 after 1 usecs calling ioresources_init+0x0/0x3c @ 1 initcall ioresources_init+0x0/0x3c returned 0 after 2 usecs calling uid_cache_init+0x0/0x8e @ 1 initcall uid_cache_init+0x0/0x8e returned 0 after 8 usecs calling init_posix_timers+0x0/0x17a @ 1 initcall init_posix_timers+0x0/0x17a returned 0 after 7 usecs calling init_posix_cpu_timers+0x0/0xe5 @ 1 initcall init_posix_cpu_timers+0x0/0xe5 returned 0 after 0 usecs calling nsproxy_cache_init+0x0/0x2d @ 1 initcall nsproxy_cache_init+0x0/0x2d returned 0 after 1 usecs calling timekeeping_init_device+0x0/0x22 @ 1 initcall timekeeping_init_device+0x0/0x22 returned 0 after 11 usecs calling init_clocksource_sysfs+0x0/0x50 @ 1 initcall init_clocksource_sysfs+0x0/0x50 returned 0 after 9 usecs calling init_timer_list_procfs+0x0/0x2c @ 1 initcall init_timer_list_procfs+0x0/0x2c returned 0 after 1 usecs calling futex_init+0x0/0x68 @ 1 initcall futex_init+0x0/0x68 returned 0 after 9 usecs calling proc_dma_init+0x0/0x22 @ 1 initcall proc_dma_init+0x0/0x22 returned 0 after 2 usecs calling proc_modules_init+0x0/0x22 @ 1 initcall proc_modules_init+0x0/0x22 returned 0 after 1 usecs calling kallsyms_init+0x0/0x25 @ 1 initcall kallsyms_init+0x0/0x25 returned 0 after 1 usecs calling snapshot_device_init+0x0/0x12 @ 1 initcall snapshot_device_init+0x0/0x12 returned 0 after 13 usecs calling crash_save_vmcoreinfo_init+0x0/0x46d @ 1 initcall crash_save_vmcoreinfo_init+0x0/0x46d returned 0 after 15 usecs calling crash_notes_memory_init+0x0/0x37 @ 1 initcall crash_notes_memory_init+0x0/0x37 returned 0 after 5 usecs calling audit_init+0x0/0x133 @ 1 audit: initializing netlink socket (disabled) type=2000 audit(1269559491.181:1): initialized initcall audit_init+0x0/0x133 returned 0 after 18 usecs calling audit_tree_init+0x0/0x49 @ 1 initcall audit_tree_init+0x0/0x49 returned 0 after 1 usecs calling utsname_sysctl_init+0x0/0x14 @ 1 initcall utsname_sysctl_init+0x0/0x14 returned 0 after 10 usecs calling init_lstats_procfs+0x0/0x25 @ 1 initcall init_lstats_procfs+0x0/0x25 returned 0 after 1 usecs calling perf_event_sysfs_init+0x0/0x19 @ 1 initcall perf_event_sysfs_init+0x0/0x19 returned 0 after 5 usecs calling init_per_zone_wmark_min+0x0/0x67 @ 1 initcall init_per_zone_wmark_min+0x0/0x67 returned 0 after 475 usecs calling kswapd_init+0x0/0x7c @ 1 initcall kswapd_init+0x0/0x7c returned 0 after 84 usecs calling setup_vmstat+0x0/0xbe @ 1 initcall setup_vmstat+0x0/0xbe returned 0 after 23 usecs calling mm_sysfs_init+0x0/0x29 @ 1 initcall mm_sysfs_init+0x0/0x29 returned 0 after 3 usecs calling proc_vmalloc_init+0x0/0x25 @ 1 initcall proc_vmalloc_init+0x0/0x25 returned 0 after 1 usecs calling procswaps_init+0x0/0x22 @ 1 initcall procswaps_init+0x0/0x22 returned 0 after 1 usecs calling hugetlb_init+0x0/0x3d0 @ 1 HugeTLB registered 2 MB page size, pre-allocated 0 pages initcall hugetlb_init+0x0/0x3d0 returned 0 after 13 usecs calling slab_proc_init+0x0/0x25 @ 1 initcall slab_proc_init+0x0/0x25 returned 0 after 1 usecs calling slab_sysfs_init+0x0/0xee @ 1 initcall slab_sysfs_init+0x0/0xee returned 0 after 1848 usecs calling fasync_init+0x0/0x2a @ 1 initcall fasync_init+0x0/0x2a returned 0 after 3 usecs calling proc_filesystems_init+0x0/0x22 @ 1 initcall proc_filesystems_init+0x0/0x22 returned 0 after 1 usecs calling dnotify_init+0x0/0x80 @ 1 initcall dnotify_init+0x0/0x80 returned 0 after 6 usecs calling inotify_setup+0x0/0x12 @ 1 initcall inotify_setup+0x0/0x12 returned 0 after 0 usecs calling inotify_user_setup+0x0/0xbe @ 1 initcall inotify_user_setup+0x0/0xbe returned 0 after 19 usecs calling aio_setup+0x0/0xa1 @ 1 initcall aio_setup+0x0/0xa1 returned 0 after 245 usecs calling proc_locks_init+0x0/0x22 @ 1 initcall proc_locks_init+0x0/0x22 returned 0 after 1 usecs calling init_sys32_ioctl+0x0/0x82 @ 1 initcall init_sys32_ioctl+0x0/0x82 returned 0 after 9 usecs calling init_mbcache+0x0/0x14 @ 1 initcall init_mbcache+0x0/0x14 returned 0 after 0 usecs calling dquot_init+0x0/0xf9 @ 1 VFS: Disk quotas dquot_6.5.2 Dquot-cache hash table entries: 512 (order 0, 4096 bytes) initcall dquot_init+0x0/0xf9 returned 0 after 50 usecs calling init_v2_quota_format+0x0/0x12 @ 1 initcall init_v2_quota_format+0x0/0x12 returned 0 after 0 usecs calling proc_cmdline_init+0x0/0x22 @ 1 initcall proc_cmdline_init+0x0/0x22 returned 0 after 1 usecs calling proc_cpuinfo_init+0x0/0x22 @ 1 initcall proc_cpuinfo_init+0x0/0x22 returned 0 after 1 usecs calling proc_devices_init+0x0/0x22 @ 1 initcall proc_devices_init+0x0/0x22 returned 0 after 1 usecs calling proc_interrupts_init+0x0/0x22 @ 1 initcall proc_interrupts_init+0x0/0x22 returned 0 after 1 usecs calling proc_loadavg_init+0x0/0x22 @ 1 initcall proc_loadavg_init+0x0/0x22 returned 0 after 1 usecs calling proc_meminfo_init+0x0/0x22 @ 1 initcall proc_meminfo_init+0x0/0x22 returned 0 after 1 usecs calling proc_stat_init+0x0/0x22 @ 1 initcall proc_stat_init+0x0/0x22 returned 0 after 1 usecs calling proc_uptime_init+0x0/0x22 @ 1 initcall proc_uptime_init+0x0/0x22 returned 0 after 1 usecs calling proc_version_init+0x0/0x22 @ 1 initcall proc_version_init+0x0/0x22 returned 0 after 1 usecs calling proc_softirqs_init+0x0/0x22 @ 1 initcall proc_softirqs_init+0x0/0x22 returned 0 after 1 usecs calling proc_kcore_init+0x0/0xa9 @ 1 initcall proc_kcore_init+0x0/0xa9 returned 0 after 7 usecs calling vmcore_init+0x0/0x376 @ 1 initcall vmcore_init+0x0/0x376 returned 0 after 0 usecs calling proc_kmsg_init+0x0/0x25 @ 1 initcall proc_kmsg_init+0x0/0x25 returned 0 after 1 usecs calling proc_page_init+0x0/0x42 @ 1 initcall proc_page_init+0x0/0x42 returned 0 after 2 usecs calling init_devpts_fs+0x0/0x4c @ 1 initcall init_devpts_fs+0x0/0x4c returned 0 after 13 usecs calling init_ext3_fs+0x0/0x71 @ 1 initcall init_ext3_fs+0x0/0x71 returned 0 after 50 usecs calling init_ext4_fs+0x0/0xea @ 1 initcall init_ext4_fs+0x0/0xea returned 0 after 149 usecs calling journal_init+0x0/0x99 @ 1 initcall journal_init+0x0/0x99 returned 0 after 98 usecs calling journal_init+0x0/0xec @ 1 initcall journal_init+0x0/0xec returned 0 after 100 usecs calling init_ramfs_fs+0x0/0x12 @ 1 initcall init_ramfs_fs+0x0/0x12 returned 0 after 1 usecs calling init_hugetlbfs_fs+0x0/0x98 @ 1 initcall init_hugetlbfs_fs+0x0/0x98 returned 0 after 40 usecs calling init_iso9660_fs+0x0/0x71 @ 1 initcall init_iso9660_fs+0x0/0x71 returned 0 after 36 usecs calling init_nls_cp437+0x0/0x12 @ 1 initcall init_nls_cp437+0x0/0x12 returned 0 after 0 usecs calling init_nls_ascii+0x0/0x12 @ 1 initcall init_nls_ascii+0x0/0x12 returned 0 after 0 usecs calling ipc_init+0x0/0x23 @ 1 msgmni has been set to 13099 initcall ipc_init+0x0/0x23 returned 0 after 7 usecs calling ipc_sysctl_init+0x0/0x14 @ 1 initcall ipc_sysctl_init+0x0/0x14 returned 0 after 19 usecs calling init_mqueue_fs+0x0/0xb4 @ 1 initcall init_mqueue_fs+0x0/0xb4 returned 0 after 45 usecs calling key_proc_init+0x0/0x59 @ 1 initcall key_proc_init+0x0/0x59 returned 0 after 2 usecs calling selinux_nf_ip_init+0x0/0x62 @ 1 SELinux: Registering netfilter hooks initcall selinux_nf_ip_init+0x0/0x62 returned 0 after 3 usecs calling init_sel_fs+0x0/0x68 @ 1 initcall init_sel_fs+0x0/0x68 returned 0 after 76 usecs calling selnl_init+0x0/0x4d @ 1 initcall selnl_init+0x0/0x4d returned 0 after 3 usecs calling sel_netif_init+0x0/0x66 @ 1 initcall sel_netif_init+0x0/0x66 returned 0 after 3 usecs calling sel_netnode_init+0x0/0x74 @ 1 initcall sel_netnode_init+0x0/0x74 returned 0 after 2 usecs calling sel_netport_init+0x0/0x74 @ 1 initcall sel_netport_init+0x0/0x74 returned 0 after 2 usecs calling aurule_init+0x0/0x37 @ 1 initcall aurule_init+0x0/0x37 returned 0 after 0 usecs calling crypto_wq_init+0x0/0x2e @ 1 initcall crypto_wq_init+0x0/0x2e returned 0 after 232 usecs calling crypto_algapi_init+0x0/0xd @ 1 initcall crypto_algapi_init+0x0/0xd returned 0 after 6 usecs calling skcipher_module_init+0x0/0x35 @ 1 initcall skcipher_module_init+0x0/0x35 returned 0 after 0 usecs calling chainiv_module_init+0x0/0x12 @ 1 initcall chainiv_module_init+0x0/0x12 returned 0 after 1 usecs calling eseqiv_module_init+0x0/0x12 @ 1 initcall eseqiv_module_init+0x0/0x12 returned 0 after 0 usecs calling hmac_module_init+0x0/0x12 @ 1 initcall hmac_module_init+0x0/0x12 returned 0 after 4 usecs calling md5_mod_init+0x0/0x12 @ 1 initcall md5_mod_init+0x0/0x12 returned 0 after 113 usecs calling sha1_generic_mod_init+0x0/0x12 @ 1 initcall sha1_generic_mod_init+0x0/0x12 returned 0 after 126 usecs calling crc32c_mod_init+0x0/0x12 @ 1 initcall crc32c_mod_init+0x0/0x12 returned 0 after 106 usecs calling krng_mod_init+0x0/0x12 @ 1 alg: No test for stdrng (krng) initcall krng_mod_init+0x0/0x12 returned 0 after 89 usecs calling proc_genhd_init+0x0/0x3c @ 1 initcall proc_genhd_init+0x0/0x3c returned 0 after 2 usecs calling bsg_init+0x0/0x12e @ 1 Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) initcall bsg_init+0x0/0x12e returned 0 after 38 usecs calling noop_init+0x0/0x14 @ 1 io scheduler noop registered initcall noop_init+0x0/0x14 returned 0 after 2 usecs calling as_init+0x0/0x14 @ 1 io scheduler anticipatory registered initcall as_init+0x0/0x14 returned 0 after 2 usecs calling deadline_init+0x0/0x14 @ 1 io scheduler deadline registered initcall deadline_init+0x0/0x14 returned 0 after 2 usecs calling cfq_init+0x0/0x94 @ 1 io scheduler cfq registered (default) initcall cfq_init+0x0/0x94 returned 0 after 30 usecs calling percpu_counter_startup+0x0/0x38 @ 1 initcall percpu_counter_startup+0x0/0x38 returned 0 after 0 usecs calling dynamic_debug_init+0x0/0x12a @ 1 initcall dynamic_debug_init+0x0/0x12a returned 0 after 56 usecs calling pci_proc_init+0x0/0x6a @ 1 initcall pci_proc_init+0x0/0x6a returned 0 after 49 usecs calling pcie_portdrv_init+0x0/0x4c @ 1 alloc irq_desc for 1257 on node 0 alloc kstat_irqs on node 0 pcieport 0000:00:01.0: setting latency timer to 64 alloc irq_desc for 1256 on node 0 alloc kstat_irqs on node 0 pcieport 0000:00:1c.0: setting latency timer to 64 alloc irq_desc for 1255 on node 0 alloc kstat_irqs on node 0 pcieport 0000:00:1c.1: setting latency timer to 64 initcall pcie_portdrv_init+0x0/0x4c returned 0 after 653 usecs calling aer_service_init+0x0/0x2b @ 1 initcall aer_service_init+0x0/0x2b returned 0 after 8 usecs calling pci_hotplug_init+0x0/0x1d @ 1 pci_hotplug: PCI Hot Plug PCI Core version: 0.5 initcall pci_hotplug_init+0x0/0x1d returned 0 after 2 usecs calling pcied_init+0x0/0x79 @ 1 pciehp: PCI Express Hot Plug Controller Driver version: 0.4 initcall pcied_init+0x0/0x79 returned 0 after 81 usecs calling acpiphp_init+0x0/0x5f @ 1 acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 initcall acpiphp_init+0x0/0x5f returned -19 after 514 usecs calling pci_stub_init+0x0/0x139 @ 1 pci-stub: invalid id string "" initcall pci_stub_init+0x0/0x139 returned 0 after 12 usecs calling pcifront_init+0x0/0x4f @ 1 initcall pcifront_init+0x0/0x4f returned 0 after 11 usecs calling fb_console_init+0x0/0x11d @ 1 initcall fb_console_init+0x0/0x11d returned 0 after 13 usecs calling vesafb_init+0x0/0x23c @ 1 initcall vesafb_init+0x0/0x23c returned 0 after 20 usecs calling efifb_init+0x0/0x1f5 @ 1 initcall efifb_init+0x0/0x1f5 returned -19 after 3 usecs calling acpi_reserve_resources+0x0/0xeb @ 1 initcall acpi_reserve_resources+0x0/0xeb returned 0 after 2 usecs calling irqrouter_init_sysfs+0x0/0x38 @ 1 initcall irqrouter_init_sysfs+0x0/0x38 returned 0 after 9 usecs calling acpi_ac_init+0x0/0x45 @ 1 initcall acpi_ac_init+0x0/0x45 returned 0 after 16 usecs calling acpi_button_init+0x0/0x56 @ 1 input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 ACPI: Power Button [VBTN] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 ACPI: Power Button [PWRF] initcall acpi_button_init+0x0/0x56 returned 0 after 118 usecs calling acpi_fan_init+0x0/0x56 @ 1 initcall acpi_fan_init+0x0/0x56 returned 0 after 11 usecs calling acpi_video_init+0x0/0x77 @ 1 initcall acpi_video_init+0x0/0x77 returned 0 after 4 usecs calling acpi_pci_slot_init+0x0/0x20 @ 1 initcall acpi_pci_slot_init+0x0/0x20 returned 0 after 705 usecs calling acpi_processor_init+0x0/0x136 @ 1 initcall acpi_processor_init+0x0/0x136 returned 0 after 12053 usecs calling acpi_container_init+0x0/0x42 @ 1 initcall acpi_container_init+0x0/0x42 returned 0 after 154159 usecs calling acpi_thermal_init+0x0/0x7b @ 1 initcall acpi_thermal_init+0x0/0x7b returned 0 after 22 usecs calling acpi_battery_init+0x0/0x16 @ 1 initcall acpi_battery_init+0x0/0x16 returned 0 after 4 usecs calling evtchn_init+0x0/0x6e @ 1 Event-channel device installed. initcall evtchn_init+0x0/0x6e returned 0 after 26 usecs calling pciback_init+0x0/0x17b @ 1 calling 1_acpi_battery_init_async+0x0/0x3c @ 62 initcall 1_acpi_battery_init_async+0x0/0x3c returned 0 after 54 usecs initcall pciback_init+0x0/0x17b returned 0 after 218 usecs calling blkif_init+0x0/0x17b @ 1 initcall blkif_init+0x0/0x17b returned 0 after 1739 usecs calling netback_init+0x0/0x1cf @ 1 registering netback initcall netback_init+0x0/0x1cf returned 0 after 591 usecs calling hypervisor_subsys_init+0x0/0x25 @ 1 initcall hypervisor_subsys_init+0x0/0x25 returned 0 after 0 usecs calling hyper_sysfs_init+0x0/0xfb @ 1 initcall hyper_sysfs_init+0x0/0xfb returned 0 after 8 usecs calling rand_initialize+0x0/0x2c @ 1 initcall rand_initialize+0x0/0x2c returned 0 after 9 usecs calling tty_init+0x0/0xf5 @ 1 initcall tty_init+0x0/0xf5 returned 0 after 859 usecs calling pty_init+0x0/0x336 @ 1 initcall pty_init+0x0/0x336 returned 0 after 60 usecs calling sysrq_init+0x0/0x25 @ 1 initcall sysrq_init+0x0/0x25 returned 0 after 7 usecs calling xen_hvc_init+0x0/0xde @ 1 alloc irq_desc for 1254 on node 0 alloc kstat_irqs on node 0 initcall xen_hvc_init+0x0/0xde returned 0 after 222 usecs calling raw_init+0x0/0xe5 @ 1 initcall raw_init+0x0/0xe5 returned 0 after 31 usecs calling hpet_init+0x0/0x6a @ 1 hpet_acpi_add: no address or irqs in _CRS initcall hpet_init+0x0/0x6a returned 0 after 302 usecs calling nvram_init+0x0/0x82 @ 1 Non-volatile memory driver v1.3 initcall nvram_init+0x0/0x82 returned 0 after 18 usecs calling agp_init+0x0/0x26 @ 1 Linux agpgart interface v0.103 initcall agp_init+0x0/0x26 returned 0 after 1 usecs calling agp_intel_init+0x0/0x29 @ 1 agpgart-intel 0000:00:00.0: Intel Q45/Q43 Chipset agpgart-intel 0000:00:00.0: detected 32764K stolen memory agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000 initcall agp_intel_init+0x0/0x29 returned 0 after 5248 usecs calling agp_sis_init+0x0/0x29 @ 1 initcall agp_sis_init+0x0/0x29 returned 0 after 11 usecs calling agp_via_init+0x0/0x29 @ 1 initcall agp_via_init+0x0/0x29 returned 0 after 10 usecs calling init_tis+0x0/0x8e @ 1 tpm_tis 00:08: 1.2 TPM (device-id 0x4A10, rev-id 78) initcall init_tis+0x0/0x8e returned 0 after 28183 usecs calling drm_core_init+0x0/0x12d @ 1 [drm] Initialized drm 1.1.0 20060810 initcall drm_core_init+0x0/0x12d returned 0 after 35 usecs calling ttm_init+0x0/0x6c @ 1 initcall ttm_init+0x0/0x6c returned 0 after 17 usecs calling tdfx_init+0x0/0x12 @ 1 [drm:drm_init], initcall tdfx_init+0x0/0x12 returned 0 after 19 usecs calling r128_init+0x0/0x1e @ 1 [drm:drm_init], initcall r128_init+0x0/0x1e returned 0 after 93 usecs calling radeon_init+0x0/0xc1 @ 1 [drm] radeon defaulting to kernel modesetting. [drm] radeon kernel modesetting enabled. [drm:drm_init], initcall radeon_init+0x0/0xc1 returned 0 after 44 usecs calling mga_init+0x0/0x1e @ 1 [drm:drm_init], initcall mga_init+0x0/0x1e returned 0 after 13 usecs calling i810_init+0x0/0x1e @ 1 [drm:drm_init], initcall i810_init+0x0/0x1e returned 0 after 13 usecs calling i915_init+0x0/0x52 @ 1 [drm:drm_init], [drm:drm_get_dev], xen: registering gsi 16 triggering 0 polarity 1 xen_allocate_pirq: returning irq 16 for gsi 16 xen: --> irq=16 Already setup the GSI :16 i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 i915 0000:00:02.0: setting latency timer to 64 [drm:drm_get_minor], [drm:drm_get_minor], new minor assigned 64 [drm:drm_get_minor], [drm:drm_get_minor], new minor assigned 0 alloc irq_desc for 1253 on node 0 alloc kstat_irqs on node 0 [drm] set up 31M of stolen space [drm:drm_agp_bind_pages], [drm:i915_gem_init_hws], hws offset: 0x01fff000 [drm:drm_agp_bind_pages], [drm:parse_general_definitions], crt_ddc_bus_pin: 2 [drm:parse_sdvo_device_mapping], No SDVO device info is found in VBT [drm:drm_irq_install], irq=1253 [drm:intel_modeset_init], 2 display pipes available. [drm:drm_sysfs_connector_add], adding "VGA-1" to sysfs [drm:drm_sysfs_hotplug_event], generating hotplug event [drm:drm_sysfs_connector_add], adding "HDMI Type A-1" to sysfs [drm:drm_sysfs_hotplug_event], generating hotplug event [drm:drm_sysfs_connector_add], adding "DisplayPort-1" to sysfs [drm:drm_sysfs_hotplug_event], generating hotplug event [drm:intel_dp_i2c_init], i2c_init DPDDC-C [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x514500c8 [drm:i2c_algo_dp_aux_transaction], aux_ch failed -110 [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x514500c8 [drm:i2c_algo_dp_aux_transaction], aux_ch failed -110 [drm:drm_helper_probe_single_connector_modes], VGA-1 [drm:drm_helper_probe_single_connector_modes], VGA-1 is disconnected [drm:drm_helper_probe_single_connector_modes], HDMI Type A-1 [drm:drm_helper_probe_single_connector_modes], Probed modes for HDMI Type A-1 [drm:drm_mode_debug_printmodeline], Modeline 22:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x48 0x5 [drm:drm_mode_debug_printmodeline], Modeline 16:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5 [drm:drm_mode_debug_printmodeline], Modeline 20:"1152x864" 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5 [drm:drm_mode_debug_printmodeline], Modeline 17:"1024x768" 75 78800 1024 1040 1136 1312 768 769 772 800 0x40 0x5 [drm:drm_mode_debug_printmodeline], Modeline 18:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa [drm:drm_mode_debug_printmodeline], Modeline 19:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5 [drm:drm_mode_debug_printmodeline], Modeline 12:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 [drm:drm_mode_debug_printmodeline], Modeline 13:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa [drm:drm_mode_debug_printmodeline], Modeline 14:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa [drm:drm_mode_debug_printmodeline], Modeline 15:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6 [drm:drm_helper_probe_single_connector_modes], DisplayPort-1 [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x514500c8 [drm:drm_helper_probe_single_connector_modes], DisplayPort-1 is disconnected [drm:drm_setup_crtcs], [drm:drm_enable_connectors], connector 5 enabled? no [drm:drm_enable_connectors], connector 7 enabled? yes [drm:drm_enable_connectors], connector 9 enabled? no [drm:drm_target_preferred], looking for cmdline mode on connector 7 [drm:drm_target_preferred], looking for preferred mode on connector 7 [drm:drm_target_preferred], found mode 1280x1024 [drm:drm_setup_crtcs], picking CRTCs for 8192x8192 config [drm:drm_setup_crtcs], desired mode 1280x1024 set on crtc 3 [drm:intelfb_probe], [drm:drm_agp_bind_pages], [drm:intelfb_create], allocated 1280x1024 fb: 0x02020000, bo ffff8801e07c9a80 [drm:drm_crtc_helper_set_config], [drm:drm_crtc_helper_set_config], crtc: ffff8801dfd1d000 3 fb: ffff8801e07c9cc0 connectors: ffff8801e069fd20 num_connectors: 1 (x, y) (0, 0) [drm:drm_crtc_helper_set_config], crtc has no fb, full mode set [drm:drm_crtc_helper_set_config], modes are different, full mode set [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [drm:drm_mode_debug_printmodeline], Modeline 23:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x48 0x5 [drm:drm_crtc_helper_set_config], setting connector 7 crtc to ffff8801dfd1d000 [drm:drm_crtc_helper_set_config], attempting to set mode from userspace [drm:drm_mode_debug_printmodeline], Modeline 23:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x48 0x5 [drm:intel_update_watermarks], plane A (pipe 0) clock: 108000 [drm:g4x_update_wm], FIFO watermarks - A: 35, B: 2 [drm:g4x_update_wm], self-refresh entries: 87 [drm:g4x_update_wm], Setting FIFO watermarks - A: 35, B: 2, SR 87 [drm:drm_vblank_get], enabling vblank on crtc 0, ret: -22 [drm:intel_crtc_mode_set], Mode for pipe A: [drm:drm_mode_debug_printmodeline], Modeline 23:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x48 0x5 [drm:intel_crtc_mode_set], disabling CxSR downclocking [drm:intel_pipe_set_base], Writing base 02020000 00000000 0 0 [drm:intel_update_watermarks], plane A (pipe 0) clock: 108000 [drm:g4x_update_wm], FIFO watermarks - A: 35, B: 2 [drm:g4x_update_wm], self-refresh entries: 87 [drm:g4x_update_wm], Setting FIFO watermarks - A: 35, B: 2, SR 87 [drm] TMDS-8: set mode 1280x1024 17 [drm:intel_update_watermarks], plane A (pipe 0) clock: 108000 [drm:g4x_update_wm], FIFO watermarks - A: 35, B: 2 [drm:g4x_update_wm], self-refresh entries: 87 [drm:g4x_update_wm], Setting FIFO watermarks - A: 35, B: 2, SR 87 [drm:intel_update_watermarks], plane A (pipe 0) clock: 108000 [drm:g4x_update_wm], FIFO watermarks - A: 35, B: 2 [drm:g4x_update_wm], self-refresh entries: 87 [drm:g4x_update_wm], Setting FIFO watermarks - A: 35, B: 2, SR 87 [drm:drm_crtc_helper_set_config], [drm:drm_crtc_helper_set_config], crtc: ffff8801dfd1d000 3 fb: ffff8801e07c9cc0 connectors: ffff8801e069fd20 num_connectors: 1 (x, y) (0, 0) [drm:drm_crtc_helper_set_config], setting connector 7 crtc to ffff8801dfd1d000 Console: switching to colour frame buffer device 160x64 [drm:drm_crtc_helper_set_config], [drm:drm_crtc_helper_set_config], crtc: ffff8801dfd1d000 3 fb: ffff8801e07c9cc0 connectors: ffff8801e069fd20 num_connectors: 1 (x, y) (0, 0) [drm:drm_crtc_helper_set_config], setting connector 7 crtc to ffff8801dfd1d000 fb0: inteldrmfb frame buffer device registered panic notifier [drm:intel_opregion_init], graphic opregion physical addr: 0xbdc51c00 [drm:intel_opregion_init], Public ACPI methods not supported [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 initcall i915_init+0x0/0x52 returned 0 after 469601 usecs calling sis_init+0x0/0x1e @ 1 [drm:drm_init], initcall sis_init+0x0/0x1e returned 0 after 16 usecs calling savage_init+0x0/0x1e @ 1 [drm:drm_init], initcall savage_init+0x0/0x1e returned 0 after 39 usecs calling via_init+0x0/0x23 @ 1 [drm:drm_init], initcall via_init+0x0/0x23 returned 0 after 18 usecs calling cn_proc_init+0x0/0x3d @ 1 initcall cn_proc_init+0x0/0x3d returned 0 after 1 usecs calling serial8250_init+0x0/0x143 @ 1 Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled initcall serial8250_init+0x0/0x143 returned 0 after 132 usecs calling serial8250_pnp_init+0x0/0x12 @ 1 initcall serial8250_pnp_init+0x0/0x12 returned 0 after 130 usecs calling serial8250_pci_init+0x0/0x1b @ 1 xen: registering gsi 17 triggering 0 polarity 1 xen_allocate_pirq: returning irq 17 for gsi 17 xen: --> irq=17 Already setup the GSI :17 serial 0000:00:03.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17 0000:00:03.3: ttyS0 at I/O 0xec98 (irq = 17) is a 16550A initcall serial8250_pci_init+0x0/0x1b returned 0 after 137 usecs calling topology_sysfs_init+0x0/0x50 @ 1 initcall topology_sysfs_init+0x0/0x50 returned 0 after 16 usecs calling brd_init+0x0/0x199 @ 1 brd: module loaded initcall brd_init+0x0/0x199 returned 0 after 781 usecs calling loop_init+0x0/0x1b3 @ 1 loop: module loaded initcall loop_init+0x0/0x1b3 returned 0 after 390 usecs calling mac_hid_init+0x0/0x8e @ 1 input: Macintosh mouse button emulation as /devices/virtual/input/input2 initcall mac_hid_init+0x0/0x8e returned 0 after 52 usecs calling scsi_dh_init+0x0/0x3f @ 1 initcall scsi_dh_init+0x0/0x3f returned 0 after 0 usecs calling init_sd+0x0/0x161 @ 1 initcall init_sd+0x0/0x161 returned 0 after 40 usecs calling init_sr+0x0/0x46 @ 1 initcall init_sr+0x0/0x46 returned 0 after 6 usecs calling init_sg+0x0/0x125 @ 1 initcall init_sg+0x0/0x125 returned 0 after 19 usecs calling ahci_init+0x0/0x1b @ 1 ahci 0000:00:1f.2: version 3.0 xen: registering gsi 18 triggering 0 polarity 1 alloc irq_desc for 18 on node 0 alloc kstat_irqs on node 0 xen: --> irq=18 ahci 0000:00:1f.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 alloc irq_desc for 1252 on node 0 alloc kstat_irqs on node 0 ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x27 impl RAID mode ahci 0000:00:1f.2: flags: 64bit ncq sntf led clo pio ems sxs ahci 0000:00:1f.2: setting latency timer to 64 scsi0 : ahci scsi1 : ahci scsi2 : ahci scsi3 : ahci scsi4 : ahci scsi5 : ahci ata1: SATA max UDMA/133 abar m2048@0xff970000 port 0xff970100 irq 1252 ata2: SATA max UDMA/133 abar m2048@0xff970000 port 0xff970180 irq 1252 ata3: SATA max UDMA/133 abar m2048@0xff970000 port 0xff970200 irq 1252 ata4: DUMMY ata5: DUMMY ata6: SATA max UDMA/133 abar m2048@0xff970000 port 0xff970380 irq 1252 calling 2_async_port_probe+0x0/0xb5 @ 62 initcall ahci_init+0x0/0x1b returned 0 after 7725 usecs calling piix_init+0x0/0x29 @ 1 calling 3_async_port_probe+0x0/0xb5 @ 78 initcall piix_init+0x0/0x29 returned 0 after 30 usecs calling 4_async_port_probe+0x0/0xb5 @ 79 calling fixed_mdio_bus_init+0x0/0xf4 @ 1 Fixed MDIO Bus: probed initcall fixed_mdio_bus_init+0x0/0xf4 returned 0 after 44 usecs calling net_olddevs_init+0x0/0x9e @ 1 calling 5_async_port_probe+0x0/0xb5 @ 80 initcall net_olddevs_init+0x0/0x9e returned 0 after 3 usecs calling cdrom_init+0x0/0xd @ 1 async_waiting @ 80 calling 6_async_port_probe+0x0/0xb5 @ 81 initcall cdrom_init+0x0/0xd returned 0 after 32 usecs calling mon_init+0x0/0x104 @ 1 async_waiting @ 81 calling 7_async_port_probe+0x0/0xb5 @ 82 initcall mon_init+0x0/0x104 returned 0 after 42 usecs calling ehci_hcd_init+0x0/0xbf @ 1 ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver xen: registering gsi 22 triggering 0 polarity 1 alloc irq_desc for 22 on node 0 alloc kstat_irqs on node 0 xen: --> irq=22 ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 22 (level, low) -> IRQ 22 ehci_hcd 0000:00:1a.7: setting latency timer to 64 ehci_hcd 0000:00:1a.7: EHCI Host Controller ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:1a.7: debug port 1 ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported ehci_hcd 0000:00:1a.7: irq 22, io mem 0xfe6da000 ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00 usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: EHCI Host Controller usb usb1: Manufacturer: Linux 2.6.32-pvops-dom0 ehci_hcd usb usb1: SerialNumber: 0000:00:1a.7 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 6 ports detected xen: registering gsi 23 triggering 0 polarity 1 alloc irq_desc for 23 on node 0 alloc kstat_irqs on node 0 xen: --> irq=23 ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 ehci_hcd 0000:00:1d.7: setting latency timer to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 ehci_hcd 0000:00:1d.7: debug port 1 ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported ehci_hcd 0000:00:1d.7: irq 23, io mem 0xff980000 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb2: Product: EHCI Host Controller usb usb2: Manufacturer: Linux 2.6.32-pvops-dom0 ehci_hcd usb usb2: SerialNumber: 0000:00:1d.7 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 6 ports detected initcall ehci_hcd_init+0x0/0xbf returned 0 after 27262 usecs calling ohci_hcd_mod_init+0x0/0x90 @ 1 ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver initcall ohci_hcd_mod_init+0x0/0x90 returned 0 after 12 usecs calling uhci_hcd_init+0x0/0xc0 @ 1 uhci_hcd: USB Universal Host Controller Interface driver xen: registering gsi 16 triggering 0 polarity 1 xen_allocate_pirq: returning irq 16 for gsi 16 xen: --> irq=16 Already setup the GSI :16 uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 uhci_hcd 0000:00:1a.0: setting latency timer to 64 uhci_hcd 0000:00:1a.0: UHCI Host Controller uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000ff20 usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb3: Product: UHCI Host Controller usb usb3: Manufacturer: Linux 2.6.32-pvops-dom0 uhci_hcd usb usb3: SerialNumber: 0000:00:1a.0 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected xen: registering gsi 17 triggering 0 polarity 1 xen_allocate_pirq: returning irq 17 for gsi 17 xen: --> irq=17 Already setup the GSI :17 uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 uhci_hcd 0000:00:1a.1: setting latency timer to 64 uhci_hcd 0000:00:1a.1: UHCI Host Controller uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1a.1: irq 17, io base 0x0000ff00 usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb4: Product: UHCI Host Controller usb usb4: Manufacturer: Linux 2.6.32-pvops-dom0 uhci_hcd usb usb4: SerialNumber: 0000:00:1a.1 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected xen: registering gsi 22 triggering 0 polarity 1 xen_allocate_pirq: returning irq 22 for gsi 22 xen: --> irq=22 Already setup the GSI :22 uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22 uhci_hcd 0000:00:1a.2: setting latency timer to 64 uhci_hcd 0000:00:1a.2: UHCI Host Controller uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5 uhci_hcd 0000:00:1a.2: irq 22, io base 0x0000fc00 usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb5: Product: UHCI Host Controller usb usb5: Manufacturer: Linux 2.6.32-pvops-dom0 uhci_hcd usb usb5: SerialNumber: 0000:00:1a.2 usb usb5: configuration #1 chosen from 1 choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected xen: registering gsi 23 triggering 0 polarity 1 xen_allocate_pirq: returning irq 23 for gsi 23 xen: --> irq=23 Already setup the GSI :23 uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 uhci_hcd 0000:00:1d.0: setting latency timer to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6 uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000ff80 usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb6: Product: UHCI Host Controller usb usb6: Manufacturer: Linux 2.6.32-pvops-dom0 uhci_hcd usb usb6: SerialNumber: 0000:00:1d.0 usb usb6: configuration #1 chosen from 1 choice hub 6-0:1.0: USB hub found hub 6-0:1.0: 2 ports detected xen: registering gsi 17 triggering 0 polarity 1 xen_allocate_pirq: returning irq 17 for gsi 17 xen: --> irq=17 Already setup the GSI :17 uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 uhci_hcd 0000:00:1d.1: setting latency timer to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7 uhci_hcd 0000:00:1d.1: irq 17, io base 0x0000ff60 usb usb7: New USB device found, idVendor=1d6b, idProduct=0001 usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb7: Product: UHCI Host Controller usb usb7: Manufacturer: Linux 2.6.32-pvops-dom0 uhci_hcd usb usb7: SerialNumber: 0000:00:1d.1 usb usb7: configuration #1 chosen from 1 choice hub 7-0:1.0: USB hub found hub 7-0:1.0: 2 ports detected xen: registering gsi 18 triggering 0 polarity 1 xen_allocate_pirq: returning irq 18 for gsi 18 xen: --> irq=18 Already setup the GSI :18 uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 uhci_hcd 0000:00:1d.2: setting latency timer to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8 uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000ff40 usb usb8: New USB device found, idVendor=1d6b, idProduct=0001 usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb8: Product: UHCI Host Controller usb usb8: Manufacturer: Linux 2.6.32-pvops-dom0 uhci_hcd usb usb8: SerialNumber: 0000:00:1d.2 usb usb8: configuration #1 chosen from 1 choice hub 8-0:1.0: USB hub found hub 8-0:1.0: 2 ports detected initcall uhci_hcd_init+0x0/0xc0 returned 0 after 1724 usecs calling i8042_init+0x0/0x3a7 @ 1 PNP: No PS/2 controller found. Probing ports directly. serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 initcall i8042_init+0x0/0x3a7 returned 0 after 2667 usecs calling serport_init+0x0/0x34 @ 1 initcall serport_init+0x0/0x34 returned 0 after 0 usecs calling mousedev_init+0x0/0x62 @ 1 mice: PS/2 mouse device common for all mice initcall mousedev_init+0x0/0x62 returned 0 after 33 usecs calling evdev_init+0x0/0x12 @ 1 initcall evdev_init+0x0/0x12 returned 0 after 43 usecs calling atkbd_init+0x0/0x27 @ 1 initcall atkbd_init+0x0/0x27 returned 0 after 12 usecs calling psmouse_init+0x0/0x6f @ 1 initcall psmouse_init+0x0/0x6f returned 0 after 40 usecs calling cmos_init+0x0/0x6a @ 1 Driver 'rtc_cmos' needs updating - please use bus_type methods rtc_cmos 00:05: RTC can wake from S4 rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0 rtc0: alarms up to one day, 242 bytes nvram initcall cmos_init+0x0/0x6a returned 0 after 88 usecs calling dm_init+0x0/0x46 @ 1 device-mapper: uevent: version 1.0.3 device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@xxxxxxxxxx initcall dm_init+0x0/0x46 returned 0 after 210 usecs calling dm_snapshot_init+0x0/0x216 @ 1 initcall dm_snapshot_init+0x0/0x216 returned 0 after 39 usecs calling dm_mirror_init+0x0/0x79 @ 1 initcall dm_mirror_init+0x0/0x79 returned 0 after 30 usecs calling dm_dirty_log_init+0x0/0x59 @ 1 initcall dm_dirty_log_init+0x0/0x59 returned 0 after 0 usecs calling dm_zero_init+0x0/0x31 @ 1 initcall dm_zero_init+0x0/0x31 returned 0 after 0 usecs calling init_ladder+0x0/0x12 @ 1 cpuidle: using governor ladder initcall init_ladder+0x0/0x12 returned 0 after 2 usecs calling init_menu+0x0/0x12 @ 1 cpuidle: using governor menu initcall init_menu+0x0/0x12 returned 0 after 2 usecs calling efivars_init+0x0/0x214 @ 1 initcall efivars_init+0x0/0x214 returned -19 after 0 usecs calling hid_init+0x0/0x66 @ 1 initcall hid_init+0x0/0x66 returned 0 after 19 usecs calling a4_init+0x0/0x1b @ 1 initcall a4_init+0x0/0x1b returned 0 after 7 usecs calling apple_init+0x0/0x38 @ 1 initcall apple_init+0x0/0x38 returned 0 after 10 usecs calling belkin_init+0x0/0x1b @ 1 initcall belkin_init+0x0/0x1b returned 0 after 6 usecs calling ch_init+0x0/0x1b @ 1 initcall ch_init+0x0/0x1b returned 0 after 6 usecs calling ch_init+0x0/0x1b @ 1 initcall ch_init+0x0/0x1b returned 0 after 6 usecs calling cp_init+0x0/0x1b @ 1 initcall cp_init+0x0/0x1b returned 0 after 8 usecs calling dr_init+0x0/0x1b @ 1 initcall dr_init+0x0/0x1b returned 0 after 6 usecs calling ez_init+0x0/0x1b @ 1 initcall ez_init+0x0/0x1b returned 0 after 6 usecs calling gyration_init+0x0/0x1b @ 1 initcall gyration_init+0x0/0x1b returned 0 after 6 usecs calling ks_init+0x0/0x1b @ 1 initcall ks_init+0x0/0x1b returned 0 after 6 usecs calling kye_init+0x0/0x1b @ 1 initcall kye_init+0x0/0x1b returned 0 after 6 usecs calling lg_init+0x0/0x1b @ 1 initcall lg_init+0x0/0x1b returned 0 after 6 usecs calling ms_init+0x0/0x1b @ 1 initcall ms_init+0x0/0x1b returned 0 after 6 usecs calling mr_init+0x0/0x1b @ 1 initcall mr_init+0x0/0x1b returned 0 after 6 usecs calling ntrig_init+0x0/0x1b @ 1 initcall ntrig_init+0x0/0x1b returned 0 after 8 usecs calling pl_init+0x0/0x1b @ 1 initcall pl_init+0x0/0x1b returned 0 after 8 usecs calling pl_init+0x0/0x1b @ 1 initcall pl_init+0x0/0x1b returned 0 after 6 usecs calling samsung_init+0x0/0x1b @ 1 initcall samsung_init+0x0/0x1b returned 0 after 6 usecs calling sjoy_init+0x0/0x1b @ 1 initcall sjoy_init+0x0/0x1b returned 0 after 6 usecs calling sony_init+0x0/0x1b @ 1 initcall sony_init+0x0/0x1b returned 0 after 6 usecs calling sp_init+0x0/0x1b @ 1 initcall sp_init+0x0/0x1b returned 0 after 6 usecs calling ga_init+0x0/0x1b @ 1 initcall ga_init+0x0/0x1b returned 0 after 6 usecs calling tm_init+0x0/0x1b @ 1 initcall tm_init+0x0/0x1b returned 0 after 6 usecs calling ts_init+0x0/0x1b @ 1 initcall ts_init+0x0/0x1b returned 0 after 6 usecs calling twinhan_init+0x0/0x1b @ 1 initcall twinhan_init+0x0/0x1b returned 0 after 6 usecs calling zp_init+0x0/0x1b @ 1 initcall zp_init+0x0/0x1b returned 0 after 8 usecs calling hid_init+0x0/0xc7 @ 1 usbcore: registered new interface driver hiddev usbcore: registered new interface driver usbhid usbhid: v2.6:USB HID core driver initcall hid_init+0x0/0xc7 returned 0 after 66 usecs calling staging_init+0x0/0x8 @ 1 initcall staging_init+0x0/0x8 returned 0 after 0 usecs calling flow_cache_init+0x0/0x1a7 @ 1 initcall flow_cache_init+0x0/0x1a7 returned 0 after 13 usecs calling blackhole_module_init+0x0/0x12 @ 1 initcall blackhole_module_init+0x0/0x12 returned 0 after 0 usecs calling init_cgroup_cls+0x0/0x12 @ 1 initcall init_cgroup_cls+0x0/0x12 returned 0 after 0 usecs calling nf_conntrack_standalone_init+0x0/0x12 @ 1 nf_conntrack version 0.5.0 (16384 buckets, 65536 max) CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or sysctl net.netfilter.nf_conntrack_acct=1 to enable it. initcall nf_conntrack_standalone_init+0x0/0x12 returned 0 after 182 usecs calling xt_init+0x0/0x119 @ 1 initcall xt_init+0x0/0x119 returned 0 after 0 usecs calling tcpudp_mt_init+0x0/0x17 @ 1 initcall tcpudp_mt_init+0x0/0x17 returned 0 after 0 usecs calling conntrack_mt_init+0x0/0x17 @ 1 initcall conntrack_mt_init+0x0/0x17 returned 0 after 0 usecs calling state_mt_init+0x0/0x17 @ 1 initcall state_mt_init+0x0/0x17 returned 0 after 0 usecs calling sysctl_ipv4_init+0x0/0x4e @ 1 initcall sysctl_ipv4_init+0x0/0x4e returned 0 after 204 usecs calling init_syncookies+0x0/0x19 @ 1 initcall init_syncookies+0x0/0x19 returned 0 after 19 usecs calling ipv4_netfilter_init+0x0/0x12 @ 1 initcall ipv4_netfilter_init+0x0/0x12 returned 0 after 0 usecs calling nf_conntrack_l3proto_ipv4_init+0x0/0x12d @ 1 initcall nf_conntrack_l3proto_ipv4_init+0x0/0x12d returned 0 after 57 usecs calling nf_defrag_init+0x0/0x17 @ 1 initcall nf_defrag_init+0x0/0x17 returned 0 after 0 usecs calling ip_tables_init+0x0/0xb8 @ 1 ip_tables: (C) 2000-2006 Netfilter Core Team initcall ip_tables_init+0x0/0xb8 returned 0 after 8 usecs calling iptable_filter_init+0x0/0x69 @ 1 initcall iptable_filter_init+0x0/0x69 returned 0 after 5 usecs calling reject_tg_init+0x0/0x12 @ 1 initcall reject_tg_init+0x0/0x12 returned 0 after 0 usecs calling cubictcp_register+0x0/0x5c @ 1 TCP cubic registered initcall cubictcp_register+0x0/0x5c returned 0 after 2 usecs calling xfrm_user_init+0x0/0x4a @ 1 Initializing XFRM netlink socket initcall xfrm_user_init+0x0/0x4a returned 0 after 7 usecs calling packet_init+0x0/0x47 @ 1 NET: Registered protocol family 17 initcall packet_init+0x0/0x47 returned 0 after 6 usecs calling dsa_init_module+0x0/0x14 @ 1 initcall dsa_init_module+0x0/0x14 returned 0 after 0 usecs calling edsa_init_module+0x0/0x14 @ 1 initcall edsa_init_module+0x0/0x14 returned 0 after 0 usecs calling trailer_init_module+0x0/0x14 @ 1 initcall trailer_init_module+0x0/0x14 returned 0 after 0 usecs calling mv88e6060_init+0x0/0x14 @ 1 initcall mv88e6060_init+0x0/0x14 returned 0 after 0 usecs calling mv88e6123_61_65_init+0x0/0x14 @ 1 initcall mv88e6123_61_65_init+0x0/0x14 returned 0 after 0 usecs calling mv88e6131_init+0x0/0x14 @ 1 initcall mv88e6131_init+0x0/0x14 returned 0 after 0 usecs calling dsa_init_module+0x0/0x12 @ 1 initcall dsa_init_module+0x0/0x12 returned 0 after 7 usecs calling dcbnl_init+0x0/0x32 @ 1 initcall dcbnl_init+0x0/0x32 returned 0 after 0 usecs calling mce_debugfs_init+0x0/0x3c @ 1 initcall mce_debugfs_init+0x0/0x3c returned 0 after 4 usecs calling severities_debugfs_init+0x0/0x3c @ 1 initcall severities_debugfs_init+0x0/0x3c returned 0 after 1 usecs calling hpet_insert_resource+0x0/0x23 @ 1 initcall hpet_insert_resource+0x0/0x23 returned 0 after 0 usecs calling update_mp_table+0x0/0x623 @ 1 initcall update_mp_table+0x0/0x623 returned 0 after 0 usecs calling lapic_insert_resource+0x0/0x3f @ 1 initcall lapic_insert_resource+0x0/0x3f returned -1 after 0 usecs initcall lapic_insert_resource+0x0/0x3f returned with error code -1 calling init_lapic_nmi_sysfs+0x0/0x39 @ 1 initcall init_lapic_nmi_sysfs+0x0/0x39 returned 0 after 0 usecs calling io_apic_bug_finalize+0x0/0x1b @ 1 initcall io_apic_bug_finalize+0x0/0x1b returned 0 after 0 usecs calling check_early_ioremap_leak+0x0/0x65 @ 1 initcall check_early_ioremap_leak+0x0/0x65 returned 0 after 0 usecs calling pat_memtype_list_init+0x0/0x29 @ 1 initcall pat_memtype_list_init+0x0/0x29 returned 0 after 2 usecs calling sched_init_debug+0x0/0x24 @ 1 initcall sched_init_debug+0x0/0x24 returned 0 after 1 usecs calling init_oops_id+0x0/0x31 @ 1 initcall init_oops_id+0x0/0x31 returned 0 after 2 usecs calling disable_boot_consoles+0x0/0x5d @ 1 initcall disable_boot_consoles+0x0/0x5d returned 0 after 0 usecs calling pm_qos_power_init+0x0/0x61 @ 1 initcall pm_qos_power_init+0x0/0x61 returned 0 after 40 usecs calling test_suspend+0x0/0x19c @ 1 initcall test_suspend+0x0/0x19c returned 0 after 0 usecs calling software_resume+0x0/0x1fc @ 1 PM: Resume from disk failed. initcall software_resume+0x0/0x1fc returned -2 after 2 usecs initcall software_resume+0x0/0x1fc returned with error code -2 calling taskstats_init+0x0/0x95 @ 1 registered taskstats version 1 initcall taskstats_init+0x0/0x95 returned 0 after 5 usecs calling max_swapfiles_check+0x0/0x8 @ 1 initcall max_swapfiles_check+0x0/0x8 returned 0 after 0 usecs calling init_ima+0x0/0x1a @ 1 initcall init_ima+0x0/0x1a returned 0 after 63839 usecs calling random32_reseed+0x0/0xb3 @ 1 initcall random32_reseed+0x0/0xb3 returned 0 after 19 usecs calling pci_resource_alignment_sysfs_init+0x0/0x19 @ 1 initcall pci_resource_alignment_sysfs_init+0x0/0x19 returned 0 after 1 usecs calling pci_sysfs_init+0x0/0x51 @ 1 initcall pci_sysfs_init+0x0/0x51 returned 0 after 693 usecs calling boot_wait_for_devices+0x0/0x19 @ 1 initcall boot_wait_for_devices+0x0/0x19 returned 0 after 1 usecs calling regulator_init_complete+0x0/0x139 @ 1 initcall regulator_init_complete+0x0/0x139 returned 0 after 0 usecs calling seqgen_init+0x0/0xf @ 1 initcall seqgen_init+0x0/0xf returned 0 after 11 usecs calling late_resume_init+0x0/0x11f @ 1 Magic number: 2:675:454 initcall late_resume_init+0x0/0x11f returned 0 after 40 usecs calling scsi_complete_async_scans+0x0/0x108 @ 1 initcall scsi_complete_async_scans+0x0/0x108 returned 0 after 0 usecs calling rtc_hctosys+0x0/0x170 @ 1 rtc_cmos 00:05: setting system clock to 2010-03-25 23:24:52 UTC (1269559492) initcall rtc_hctosys+0x0/0x170 returned 0 after 48 usecs calling memmap_init+0x0/0xa3 @ 1 initcall memmap_init+0x0/0xa3 returned 0 after 44 usecs calling pci_mmcfg_late_insert_resources+0x0/0x15f @ 1 initcall pci_mmcfg_late_insert_resources+0x0/0x15f returned 0 after 1 usecs calling tcp_congestion_default+0x0/0x12 @ 1 initcall tcp_congestion_default+0x0/0x12 returned 0 after 0 usecs calling initialize_hashrnd+0x0/0x19 @ 1 initcall initialize_hashrnd+0x0/0x19 returned 0 after 3 usecs async_waiting @ 1 ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata3: SATA link down (SStatus 4 SControl 300) async_waiting @ 79 ata6: SATA link down (SStatus 0 SControl 300) async_waiting @ 82 ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata2.00: ATAPI: PLDS DVD+/-RW DS-8A3S, HD12, max UDMA/100 ata2.00: configured for UDMA/100 async_waiting @ 78 ata1.00: ATA-8: ST3320418AS, CC44, max UDMA/133 ata1.00: 625142448 sectors, multi 0: LBA48 NCQ (depth 31/32) ata1.00: configured for UDMA/133 async_waiting @ 62 async_continuing @ 62 after 0 usec scsi 0:0:0:0: Direct-Access ATA ST3320418AS CC44 PQ: 0 ANSI: 5 calling 8_sd_probe_async+0x0/0x1ea @ 87 sd 0:0:0:0: Attached scsi generic sg0 type 0 initcall 2_async_port_probe+0x0/0xb5 returned 0 after 363021 usecs async_continuing @ 78 after 59091 usec sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: scsi 1:0:0:0: CD-ROM PLDS DVD+-RW DS-8A3S HD12 PQ: 0 ANSI: 5 sda1 sda2 sda3 sda4 sd 0:0:0:0: [sda] Attached SCSI disk initcall 8_sd_probe_async+0x0/0x1ea returned 0 after 55737 usecs async_continuing @ 1 after 44216 usec Freeing unused kernel memory: 1348k freed usb 5-1: new low speed USB device using uhci_hcd and address 2 dracut: dracut-004-4.fc12 udev: starting version 145 [drm:drm_crtc_helper_set_config], [drm:drm_crtc_helper_set_config], crtc: ffff8801dfd1d000 3 fb: ffff8801e07c9cc0 connectors: ffff8801e069fd20 num_connectors: 1 (x, y) (0, 0) [drm:drm_crtc_helper_set_config], setting connector 7 crtc to ffff8801dfd1d000 dracut: Starting plymouth daemon [drm:drm_crtc_helper_set_config], [drm:drm_crtc_helper_set_config], crtc: ffff8801dfd1d000 3 fb: ffff8801e07c9cc0 connectors: ffff8801e069fd20 num_connectors: 1 (x, y) (0, 0) [drm:drm_crtc_helper_set_config], setting connector 7 crtc to ffff8801dfd1d000 usb 5-1: New USB device found, idVendor=0624, idProduct=0200 usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 5-1: Product: USB DSRIQ usb 5-1: Manufacturer: Avocent usb 5-1: configuration #1 chosen from 1 choice calling pacpi_init+0x0/0x20 [pata_acpi] @ 185 xen: registering gsi 18 triggering 0 polarity 1 xen_allocate_pirq: returning irq 18 for gsi 18 xen: --> irq=18 Already setup the GSI :18 pata_acpi 0000:00:03.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 pata_acpi 0000:00:03.2: setting latency timer to 64 pata_acpi 0000:00:03.2: PCI INT C disabled initcall pacpi_init+0x0/0x20 [pata_acpi] returned 0 after 120 usecs calling ata_generic_init+0x0/0x20 [ata_generic] @ 185 initcall ata_generic_init+0x0/0x20 [ata_generic] returned 0 after 25 usecs input: Avocent USB DSRIQ as /devices/pci0000:00/0000:00:1a.2/usb5/5-1/5-1:1.0/input/input3 generic-usb 0003:0624:0200.0001: input,hidraw0: USB HID v1.10 Keyboard [Avocent USB DSRIQ] on usb-0000:00:1a.2-1/input0 [drm:drm_crtc_helper_set_config], [drm:drm_crtc_helper_set_config], crtc: ffff8801dfd1d000 3 fb: ffff8801e07c9cc0 connectors: ffff8801e069fd20 num_connectors: 1 (x, y) (0, 0) [drm:drm_crtc_helper_set_config], setting connector 7 crtc to ffff8801dfd1d000 input: Avocent USB DSRIQ as /devices/pci0000:00/0000:00:1a.2/usb5/5-1/5-1:1.1/input/input4 generic-usb 0003:0624:0200.0002: input,hidraw1: USB HID v1.10 Mouse [Avocent USB DSRIQ] on usb-0000:00:1a.2-1/input1 calling dm_multipath_init+0x0/0x127 [dm_multipath] @ 290 device-mapper: multipath: version 1.1.0 loaded initcall dm_multipath_init+0x0/0x127 [dm_multipath] returned 0 after 321 usecs kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. dracut: Mounted root filesystem /dev/sda2 dracut: Loading SELinux policy SELinux: 8192 avtab hash slots, 158931 rules. SELinux: 8192 avtab hash slots, 158931 rules. SELinux: 8 users, 11 roles, 3034 types, 150 bools, 1 sens, 1024 cats SELinux: 77 classes, 158931 rules SELinux: Completing initialization. SELinux: Setting up existing superblocks. SELinux: initialized (dev sda2, type ext3), uses xattr SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts SELinux: initialized (dev securityfs, type securityfs), uses genfs_contexts SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses transition SIDs SELinux: initialized (dev devpts, type devpts), uses transition SIDs SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts SELinux: initialized (dev pipefs, type pipefs), uses task SIDs SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts SELinux: initialized (dev sockfs, type sockfs), uses task SIDs SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs SELinux: initialized (dev proc, type proc), uses genfs_contexts SELinux: initialized (dev bdev, type bdev), uses genfs_contexts SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts type=1403 audit(1269559494.084:2): policy loaded auid=4294967295 ses=4294967295 dracut: Switching root udev: starting version 145 type=1400 audit(1269559496.820:3): avc: denied { mmap_zero } for pid=440 comm="vbetool" scontext=system_u:system_r:vbetool_t:s0-s0:c0.c1023 tcontext=system_u:system_r:vbetool_t:s0-s0:c0.c1023 tclass=memprotect [drm:drm_crtc_helper_set_config], [drm:drm_crtc_helper_set_config], crtc: ffff8801dfd1d000 3 fb: ffff8801e07c9cc0 connectors: ffff8801e069fd20 num_connectors: 1 (x, y) (0, 0) [drm:drm_crtc_helper_set_config], setting connector 7 crtc to ffff8801dfd1d000 calling dcdbas_init+0x0/0x67 [dcdbas] @ 564 dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2) initcall dcdbas_init+0x0/0x67 [dcdbas] returned 0 after 64 usecs calling serio_raw_init+0x0/0x20 [serio_raw] @ 493 initcall serio_raw_init+0x0/0x20 [serio_raw] returned 0 after 26 usecs calling iTCO_vendor_init_module+0x0/0x1c [iTCO_vendor_support] @ 472 iTCO_vendor_support: vendor-support=0 initcall iTCO_vendor_init_module+0x0/0x1c [iTCO_vendor_support] returned 0 after 2 usecs calling iTCO_wdt_init_module+0x0/0x66 [iTCO_wdt] @ 472 iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05 iTCO_wdt: failed to reset NO_REBOOT flag, reboot disabled by hardware iTCO_wdt: No card detected initcall iTCO_wdt_init_module+0x0/0x66 [iTCO_wdt] returned 0 after 166 usecs calling e1000_init_module+0x0/0x70 [e1000e] @ 450 e1000e: Intel(R) PRO/1000 Network Driver - 1.0.2-k2 e1000e: Copyright (c) 1999-2008 Intel Corporation. xen: registering gsi 21 triggering 0 polarity 1 alloc irq_desc for 21 on node 0 alloc kstat_irqs on node 0 xen: --> irq=21 e1000e 0000:00:19.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21 e1000e 0000:00:19.0: setting latency timer to 64 alloc irq_desc for 1251 on node 0 alloc kstat_irqs on node 0 calling i2c_i801_init+0x0/0xc5 [i2c_i801] @ 490 calling pcspkr_init+0x0/0x12 [pcspkr] @ 478 input: PC Speaker as /devices/platform/pcspkr/input/input5 initcall pcspkr_init+0x0/0x12 [pcspkr] returned 0 after 116 usecs calling joydev_init+0x0/0x12 [joydev] @ 514 initcall joydev_init+0x0/0x12 [joydev] returned 0 after 2 usecs calling snd_mem_init+0x0/0x2c [snd_page_alloc] @ 494 initcall snd_mem_init+0x0/0x2c [snd_page_alloc] returned 0 after 6 usecs calling parport_default_proc_register+0x0/0x1b [parport] @ 627 initcall parport_default_proc_register+0x0/0x1b [parport] returned 0 after 25 usecs 0000:00:19.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:22:19:32:75:0f 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection 0000:00:19.0: eth0: MAC: 8, PHY: 8, PBA No: 2021ff-0ff initcall e1000_init_module+0x0/0x70 [e1000e] returned 0 after 91168 usecs xen: registering gsi 18 triggering 0 polarity 1 xen_allocate_pirq: returning irq 18 for gsi 18 xen: --> irq=18 Already setup the GSI :18 i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18 initcall i2c_i801_init+0x0/0xc5 [i2c_i801] returned 0 after 82097 usecs calling init_soundcore+0x0/0x9a [soundcore] @ 494 initcall init_soundcore+0x0/0x9a [soundcore] returned 0 after 15 usecs calling parport_pc_init+0x0/0x357 [parport_pc] @ 627 parport_pc 00:06: reported by Plug and Play ACPI parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE] calling ppdev_init+0x0/0xd2 [ppdev] @ 640 calling alsa_sound_init+0x0/0x96 [snd] @ 494 initcall alsa_sound_init+0x0/0x96 [snd] returned 0 after 27 usecs initcall parport_pc_init+0x0/0x357 [parport_pc] returned 0 after 80307 usecs calling alsa_timer_init+0x0/0x17f [snd_timer] @ 494 initcall alsa_timer_init+0x0/0x17f [snd_timer] returned 0 after 59 usecs ppdev: user-space parallel port driver initcall ppdev_init+0x0/0xd2 [ppdev] returned 0 after 104892 usecs calling alsa_pcm_init+0x0/0x71 [snd_pcm] @ 654 initcall alsa_pcm_init+0x0/0x71 [snd_pcm] returned 0 after 6 usecs calling alsa_seq_device_init+0x0/0x60 [snd_seq_device] @ 656 initcall alsa_seq_device_init+0x0/0x60 [snd_seq_device] returned 0 after 4 usecs calling alsa_seq_init+0x0/0x4c [snd_seq] @ 656 initcall alsa_seq_init+0x0/0x4c [snd_seq] returned 0 after 2244 usecs calling alsa_hwdep_init+0x0/0x69 [snd_hwdep] @ 494 initcall alsa_hwdep_init+0x0/0x69 [snd_hwdep] returned 0 after 6 usecs calling alsa_card_azx_init+0x0/0x20 [snd_hda_intel] @ 494 xen: registering gsi 16 triggering 0 polarity 1 xen_allocate_pirq: returning irq 16 for gsi 16 xen: --> irq=16 Already setup the GSI :16 HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 HDA Intel 0000:00:1b.0: setting latency timer to 64 calling patch_analog_init+0x0/0x12 [snd_hda_codec_analog] @ 714 initcall patch_analog_init+0x0/0x12 [snd_hda_codec_analog] returned 0 after 0 usecs input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input6 initcall alsa_card_azx_init+0x0/0x20 [snd_hda_intel] returned 0 after 395809 usecs calling uinput_init+0x0/0x12 [uinput] @ 726 initcall uinput_init+0x0/0x12 [uinput] returned 0 after 764 usecs calling wait_scan_init+0x0/0x12 [scsi_wait_scan] @ 740 initcall wait_scan_init+0x0/0x12 [scsi_wait_scan] returned 0 after 1 usecs EXT3 FS on sda2, internal journal kjournald starting. Commit interval 5 seconds EXT3 FS on sda1, internal journal EXT3-fs: mounted filesystem with ordered data mode. SELinux: initialized (dev sda1, type ext3), uses xattr calling xenfs_init+0x0/0x6a [xenfs] @ 786 initcall xenfs_init+0x0/0x6a [xenfs] returned 0 after 6 usecs SELinux: initialized (dev xenfs, type xenfs), uses genfs_contexts Adding 10043384k swap on /dev/sda3. Priority:-1 extents:1 across:10043384k SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts calling microcode_init+0x0/0x132 [microcode] @ 867 platform microcode: firmware: requesting intel-ucode/06-17-0a platform microcode: firmware: requesting intel-ucode/06-17-0a platform microcode: firmware: requesting intel-ucode/06-17-0a platform microcode: firmware: requesting intel-ucode/06-17-0a Microcode Update Driver: v2.00 , Peter Oruba initcall microcode_init+0x0/0x132 [microcode] returned 0 after 65375 usecs Microcode Update Driver: v2.00 removed. calling inet6_init+0x0/0x2ba [ipv6] @ 941 NET: Registered protocol family 10 lo: Disabled Privacy Extensions initcall inet6_init+0x0/0x2ba [ipv6] returned 0 after 1625 usecs calling ip6_tables_init+0x0/0xb8 [ip6_tables] @ 952 ip6_tables: (C) 2000-2006 Netfilter Core Team initcall ip6_tables_init+0x0/0xb8 [ip6_tables] returned 0 after 12 usecs calling ip6table_filter_init+0x0/0x69 [ip6table_filter] @ 954 initcall ip6table_filter_init+0x0/0x69 [ip6table_filter] returned 0 after 7 usecs calling nf_conntrack_l3proto_ipv6_init+0x0/0x11a [nf_conntrack_ipv6] @ 956 initcall nf_conntrack_l3proto_ipv6_init+0x0/0x11a [nf_conntrack_ipv6] returned 0 after 51 usecs calling reject_tg6_init+0x0/0x12 [ip6t_REJECT] @ 958 initcall reject_tg6_init+0x0/0x12 [ip6t_REJECT] returned 0 after 0 usecs calling init_sunrpc+0x0/0x5d [sunrpc] @ 1095 RPC: Registered udp transport module. RPC: Registered tcp transport module. RPC: Registered tcp NFSv4.1 backchannel transport module. initcall init_sunrpc+0x0/0x5d [sunrpc] returned 0 after 579 usecs SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts calling init_rpcsec_gss+0x0/0x4d [auth_rpcgss] @ 1326 initcall init_rpcsec_gss+0x0/0x4d [auth_rpcgss] returned 0 after 11 usecs ADDRCONF(NETDEV_UP): eth0: link is not ready calling init_nlm+0x0/0x22 [lockd] @ 1326 initcall init_nlm+0x0/0x22 [lockd] returned 0 after 43 usecs calling init_nfsd+0x0/0xe3 [nfsd] @ 1331 Installing knfsd (copyright (C) 1996 okir@xxxxxxxxxxxx). initcall init_nfsd+0x0/0xe3 [nfsd] returned 0 after 650 usecs SELinux: initialized (dev nfsd, type nfsd), uses genfs_contexts NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory NFSD: starting 90-second grace period e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX 0000:00:19.0: eth0: 10/100 speed: disabling TSO ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready calling nf_nat_init+0x0/0x124 [nf_nat] @ 1475 initcall nf_nat_init+0x0/0x124 [nf_nat] returned 0 after 30 usecs calling nf_nat_standalone_init+0x0/0x82 [iptable_nat] @ 1475 initcall nf_nat_standalone_init+0x0/0x82 [iptable_nat] returned 0 after 8 usecs calling masquerade_tg_init+0x0/0x39 [ipt_MASQUERADE] @ 1477 initcall masquerade_tg_init+0x0/0x39 [ipt_MASQUERADE] returned 0 after 4 usecs alloc irq_desc for 1250 on node 0 alloc kstat_irqs on node 0 alloc irq_desc for 1249 on node 0 xenbus_probe wake_waiting alloc kstat_irqs on node 0 xenbus_probe wake_waiting XENBUS: Unable to read cpu state XENBUS: Unable to read cpu state XENBUS: Unable to read cpu state XENBUS: Unable to read cpu state xenbus_probe_devices backend xenbus_probe_devices failed xenbus_directory backend_probe_and_watch devices probed ok backend_probe_and_watch watch add ok ok backend_probe_and_watch all done xenbus_probe_devices device xenbus_probe_devices failed xenbus_directory frontend_probe_and_watch devices probed ok frontend_probe_and_watch watch add ok ok frontend_probe_and_watch all done calling llc_init+0x0/0x20 [llc] @ 1501 initcall llc_init+0x0/0x20 [llc] returned 0 after 0 usecs calling br_init+0x0/0xcf [bridge] @ 1501 Bridge firewalling registered initcall br_init+0x0/0xcf [bridge] returned 0 after 130 usecs calling fscache_init+0x0/0xb9 [fscache] @ 1604 Slow work thread pool: Starting up Slow work thread pool: Ready FS-Cache: Loaded initcall fscache_init+0x0/0xb9 [fscache] returned 0 after 609 usecs calling init_nfs_fs+0x0/0x15c [nfs] @ 1604 FS-Cache: Netfs 'nfs' registered for caching initcall init_nfs_fs+0x0/0x15c [nfs] returned 0 after 950 usecs SELinux: initialized (dev 0:16, type nfs), uses genfs_contexts eth0: no IPv6 routers present fb_mmap: vma->vm_start=7f3237175000, vma->vm_end=7f3237176000, start=d2020000 silly: Corrupted page table at address 7f3237175000 PGD 1deaec067 PUD 1db6d1067 PMD 1da569067 PTE fffffffffffff22f Bad pagetable: 000f [#1] SMP last sysfs file: /sys/devices/system/cpu/cpu3/cache/index2/shared_cpu_map CPU 1 Modules linked in: nfs fscache bridge stp llc ipt_MASQUERADE iptable_nat nf_nat nfsd lockd nfs_acl auth_rpcgss exportfs sunrpc ip6t_REJECT nf_conntrack_ipv6 ip6table_filter ip6_tables ipv6 xenfs uinput snd_hda_codec_analog snd_hda_intel snd_hda_codec snd_hwdep snd_seq snd_seq_device snd_pcm snd_timer snd ppdev parport_pc soundcore parport snd_page_alloc joydev pcspkr i2c_i801 e1000e iTCO_wdt iTCO_vendor_support serio_raw dcdbas dm_multipath ata_generic pata_acpi [last unloaded: microcode] Pid: 1775, comm: silly Not tainted 2.6.32-pvops-dom0 #23 OptiPlex 960 RIP: e033:[<0000003002e8305b>] [<0000003002e8305b>] 0x3002e8305b RSP: e02b:00007fff42cc42c8 EFLAGS: 00010206 RAX: 00007f3237175000 RBX: 0000000000000000 RCX: 0000000000000200 RDX: 0000000000001000 RSI: 00007fff42cc42e0 RDI: 00007f3237175000 RBP: 00007fff42cc52f0 R08: 0000000000000001 R09: 0000000000000001 R10: 00000000ffffffff R11: 0000000000001000 R12: 00000000004005d0 R13: 00007fff42cc53d0 R14: 0000000000000000 R15: 0000000000000000 FS: 00007f3237162700(0000) GS:ffff880028054000(0000) knlGS:0000000000000000 CS: e033 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 00007f3237175000 CR3: 00000001df03a000 CR4: 0000000000002660 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process silly (pid: 1775, threadinfo ffff8801df02a000, task ffff8801db68ae60) RIP [<0000003002e8305b>] 0x3002e8305b RSP <00007fff42cc42c8> ---[ end trace e07c6ddec4199123 ]---