This is a bug with Xen 4.0.0-rc8 running on dom0, using the latest
xen/stable branch of the dom0 kernel (as of a couple of hours ago).
This bug has been apparent on my system since at 4.0.0 rc2 (possibly
earlier).
I have 6GB of RAM on my system. If I give 1GB to dom0 (as the following
grub entry shows):
title XEN 4.0rc8 (2.6.32.10)
root (hd0,0)
kernel /xen-4.0.0-rc8.gz dom0_mem=1gb noreboot
module /vmlinuz-2.6.32.10-pvops-dom0 root=/dev/mapper/vg00-root ro
module /initramfs.img-2.6.32.10-pvops-dom0
savedefault
the X server won't start and dmesg shows some errors (see below).
If I give dom0 2gb, it works fine.
I originally had only 2GB of RAM, and during this time the bug didn't
make itself apparent (it only started when I added more RAM). I get the
same problem with 8GB of RAM too (I haven't tried it with 4GB of RAM).
Thanks for all the great work - I've been tracking the RCs for 4.0.0 and
it's definitely getting more stable.
Yasir
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.32.10-pvops-dom0 (yhassan@eir) (gcc
version 4.4.3 20100108 (prerelease) (Debian 4.4.2-9) ) #31 SMP Wed Mar
31 18:04:03 EST 2010
[ 0.000000] Command line: root=/dev/mapper/vg00-root ro
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] xen_release_chunk: looking at area pfn 40000-b7c70: 0
pages freed
[ 0.000000] xen_release_chunk: looking at area pfn c0000-fec00: 0
pages freed
[ 0.000000] xen_release_chunk: looking at area pfn fec01-fee00: 0
pages freed
[ 0.000000] xen_release_chunk: looking at area pfn fee01-ff800: 0
pages freed
[ 0.000000] xen_release_chunk: looking at area pfn 100000-17c000: 0
pages freed
[ 0.000000] released 0 pages of unused memory
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] Xen: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] Xen: 000000000009fc00 - 0000000000100000 (reserved)
[ 0.000000] Xen: 0000000000100000 - 0000000040000000 (usable)
[ 0.000000] Xen: 00000000b7c70000 - 00000000b7c88000 (ACPI data)
[ 0.000000] Xen: 00000000b7c88000 - 00000000b7cdc000 (ACPI NVS)
[ 0.000000] Xen: 00000000b7cdc000 - 00000000c0000000 (reserved)
[ 0.000000] Xen: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] Xen: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] Xen: 00000000ff800000 - 0000000100000000 (reserved)
[ 0.000000] Xen: 000000017c000000 - 0000000180000000 (reserved)
[ 0.000000] DMI 2.6 present.
[ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working
around it.
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000
(usable) ==> (reserved)
[ 0.000000] last_pfn = 0x40000 max_arch_pfn = 0x400000000
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] init_memory_mapping: 0000000000000000-0000000040000000
[ 0.000000] 0000000000 - 0040000000 page 4k
[ 0.000000] kernel direct mapping tables up to 40000000 @ 100000-302000
[ 0.000000] RAMDISK: 016c2000 - 03192c00
[ 0.000000] ACPI: RSDP 00000000000fb9a0 00014 (v00 ACPIAM)
[ 0.000000] ACPI: RSDT 00000000b7c70000 00044 (v01 123009 RSDT0947
20091230 MSFT 00000097)
[ 0.000000] ACPI: FACP 00000000b7c70200 00084 (v01 123009 FACP0947
20091230 MSFT 00000097)
[ 0.000000] ACPI: DSDT 00000000b7c704a0 0DAB2 (v01 A1470 A1470001
00000001 INTL 20060113)
[ 0.000000] ACPI: FACS 00000000b7c88000 00040
[ 0.000000] ACPI: APIC 00000000b7c70390 000CC (v01 123009 APIC0947
20091230 MSFT 00000097)
[ 0.000000] ACPI: MCFG 00000000b7c70460 0003C (v01 123009 OEMMCFG
20091230 MSFT 00000097)
[ 0.000000] ACPI: OEMB 00000000b7c88040 00072 (v01 123009 OEMB0947
20091230 MSFT 00000097)
[ 0.000000] ACPI: HPET 00000000b7c7f4a0 00038 (v01 123009 OEMHPET
20091230 MSFT 00000097)
[ 0.000000] ACPI: GSCI 00000000b7c880c0 02024 (v01 123009 GMCHSCI
20091230 MSFT 00000097)
[ 0.000000] ACPI: OSFR 00000000b7c7f4e0 000B0 (v01 123009 OEMOSFR
20091230 MSFT 00000097)
[ 0.000000] ACPI: SSDT 00000000b7c8b810 00363 (v01 DpgPmm CpuPm
00000012 INTL 20060113)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] (8 early reservations) ==> bootmem [0000000000 - 0040000000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==>
[0000000000 - 0000001000]
[ 0.000000] #1 [0003394000 - 00033b3000] XEN PAGETABLES ==>
[0003394000 - 00033b3000]
[ 0.000000] #2 [0000006000 - 0000008000] TRAMPOLINE ==>
[0000006000 - 0000008000]
[ 0.000000] #3 [0001000000 - 00016a1034] TEXT DATA BSS ==>
[0001000000 - 00016a1034]
[ 0.000000] #4 [00016c2000 - 0003192c00] RAMDISK ==>
[00016c2000 - 0003192c00]
[ 0.000000] #5 [0003193000 - 0003394000] XEN START INFO ==>
[0003193000 - 0003394000]
[ 0.000000] #6 [00016a2000 - 00016a22c0] BRK ==>
[00016a2000 - 00016a22c0]
[ 0.000000] #7 [0000100000 - 00002e0000] PGTABLE ==>
[0000100000 - 00002e0000]
[ 0.000000] found SMP MP-table at [ffff8800000ff780] ff780
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00100000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x00040000
[ 0.000000] On node 0 totalpages: 262031
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 483 pages reserved
[ 0.000000] DMA zone: 3444 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 3528 pages used for memmap
[ 0.000000] DMA32 zone: 254520 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x05] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x84] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x85] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x86] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x87] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x09] lapic_id[0x88] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x89] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x8a] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x8b] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x8c] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x8d] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x8e] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x10] lapic_id[0x8f] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x06] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 6, version 0, address 0xfec00000, GSI 0-0
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ERROR: Unable to locate IOAPIC for GSI 2
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ERROR: Unable to locate IOAPIC for GSI 9
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 256
[ 0.000000] PM: Registered nosave memory: 000000000009f000 -
00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 -
0000000000100000
[ 0.000000] Allocating PCI resources starting at 40000000 (gap:
40000000:77c70000)
[ 0.000000] Booting paravirtualized kernel on Xen
[ 0.000000] Xen version: 4.0.0-rc8 (preserve-AD) (dom0)
[ 0.000000] NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff8800033e9000 s88344
r8192 d22248 u118784
[ 0.000000] pcpu-alloc: s88344 r8192 d22248 u118784 alloc=29*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[ 0.060695] trying to map vcpu_info 0 at ffff8800033f4060, mfn
1bb3f4, offset 96
[ 0.060698] cpu 0 using vcpu_info at ffff8800033f4060
[ 0.060700] trying to map vcpu_info 1 at ffff880003411060, mfn
1bb411, offset 96
[ 0.060702] cpu 1 using vcpu_info at ffff880003411060
[ 0.060704] trying to map vcpu_info 2 at ffff88000342e060, mfn
1bb42e, offset 96
[ 0.060706] cpu 2 using vcpu_info at ffff88000342e060
[ 0.060708] trying to map vcpu_info 3 at ffff88000344b060, mfn
1bb44b, offset 96
[ 0.060710] cpu 3 using vcpu_info at ffff88000344b060
[ 0.060711] Xen: using vcpu_info placement
[ 0.060715] Built 1 zonelists in Zone order, mobility grouping on.
Total pages: 257964
[ 0.060718] Kernel command line: root=/dev/mapper/vg00-root ro
[ 0.060731] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.060875] Dentry cache hash table entries: 131072 (order: 8,
1048576 bytes)
[ 0.061083] Inode-cache hash table entries: 65536 (order: 7, 524288
bytes)
[ 0.061482] Initializing CPU#0
[ 0.070283] DMA: Placing 64MB software IO TLB between
ffff8800045b4000 - ffff8800085b4000
[ 0.070287] DMA: software IO TLB at phys 0x45b4000 - 0x85b4000
[ 0.070289] xen_swiotlb_fixup: buf=ffff8800045b4000 size=67108864
[ 0.089013] xen_swiotlb_fixup: buf=ffff880008614000 size=32768
[ 0.092959] Memory: 926504k/1048576k available (3191k kernel code,
452k absent, 120916k reserved, 2057k data, 468k init)
[ 0.092992] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0,
CPUs=4, Nodes=1
[ 0.093012] Hierarchical RCU implementation.
[ 0.093017] NR_IRQS:4352 nr_irqs:1280
[ 0.093077] xen: registering gsi 0 triggering 1 polarity 0
[ 0.093083] xen: --> irq=0
[ 0.093085] Already setup the GSI :0
[ 0.093088] xen: registering gsi 1 triggering 1 polarity 0
[ 0.093092] xen: --> irq=1
[ 0.093093] Already setup the GSI :1
[ 0.093095] xen: registering gsi 2 triggering 1 polarity 0
[ 0.093098] xen: --> irq=2
[ 0.093099] Already setup the GSI :2
[ 0.093101] xen: registering gsi 3 triggering 1 polarity 0
[ 0.093104] xen: --> irq=3
[ 0.093106] Already setup the GSI :3
[ 0.093107] xen: registering gsi 4 triggering 1 polarity 0
[ 0.093111] xen: --> irq=4
[ 0.093112] Already setup the GSI :4
[ 0.093114] xen: registering gsi 5 triggering 1 polarity 0
[ 0.093117] xen: --> irq=5
[ 0.093118] Already setup the GSI :5
[ 0.093120] xen: registering gsi 6 triggering 1 polarity 0
[ 0.093123] xen: --> irq=6
[ 0.093124] Already setup the GSI :6
[ 0.093126] xen: registering gsi 7 triggering 1 polarity 0
[ 0.093129] xen: --> irq=7
[ 0.093131] Already setup the GSI :7
[ 0.093132] xen: registering gsi 8 triggering 1 polarity 0
[ 0.093136] xen: --> irq=8
[ 0.093137] Already setup the GSI :8
[ 0.093139] xen: registering gsi 9 triggering 1 polarity 0
[ 0.093142] xen: --> irq=9
[ 0.093143] Already setup the GSI :9
[ 0.093145] xen: registering gsi 10 triggering 1 polarity 0
[ 0.093148] xen: --> irq=10
[ 0.093149] Already setup the GSI :10
[ 0.093151] xen: registering gsi 11 triggering 1 polarity 0
[ 0.093154] xen: --> irq=11
[ 0.093156] Already setup the GSI :11
[ 0.093157] xen: registering gsi 12 triggering 1 polarity 0
[ 0.093161] xen: --> irq=12
[ 0.093162] Already setup the GSI :12
[ 0.093163] xen: registering gsi 13 triggering 1 polarity 0
[ 0.093167] xen: --> irq=13
[ 0.093168] Already setup the GSI :13
[ 0.093170] xen: registering gsi 14 triggering 1 polarity 0
[ 0.093173] xen: --> irq=14
[ 0.093174] Already setup the GSI :14
[ 0.093176] xen: registering gsi 15 triggering 1 polarity 0
[ 0.093179] xen: --> irq=15
[ 0.093180] Already setup the GSI :15
[ 0.093196] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.093199] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.093201] xen: sci override: source_irq=9 global_irq=9 trigger=c
polarity=1
[ 0.093203] xen: registering gsi 9 triggering 0 polarity 0
[ 0.093205] xen_allocate_pirq: returning irq 9 for gsi 9
[ 0.093206] xen: --> irq=9
[ 0.093207] Already setup the GSI :9
[ 0.093209] xen: acpi sci 9
[ 0.095936] Console: colour VGA+ 80x25
[ 0.102286] console [tty0] enabled
[ 0.102345] Xen: using vcpuop timer interface
[ 0.102343] installing Xen timer for CPU 0
[ 0.102393] alloc irq_desc for 1279 on node 0
[ 0.102395] alloc kstat_irqs on node 0
[ 0.102409] Detected 2942.526 MHz processor.
[ 0.102460] Calibrating delay loop (skipped), value calculated using
timer frequency.. 5885.05 BogoMIPS (lpj=11770104)
[ 0.102567] Security Framework initialized
[ 0.102614] SELinux: Disabled at boot.
[ 0.102664] Mount-cache hash table entries: 256
[ 0.102811] Initializing cgroup subsys ns
[ 0.102859] Initializing cgroup subsys cpuacct
[ 0.102907] Initializing cgroup subsys devices
[ 0.102953] Initializing cgroup subsys freezer
[ 0.103000] Initializing cgroup subsys net_cls
[ 0.103073] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.103131] CPU: L2 cache: 256K
[ 0.103174] CPU: L3 cache: 4096K
[ 0.103219] CPU: Unsupported number of siblings 16
[ 0.103247] Performance Events: unsupported p6 CPU model 37 no PMU
driver, software events only.
[ 0.103392] SMP alternatives: switching to UP code
[ 0.121905] ACPI: Core revision 20090903
[ 0.162076] alloc irq_desc for 1278 on node 0
[ 0.162078] alloc kstat_irqs on node 0
[ 0.162084] alloc irq_desc for 1277 on node 0
[ 0.162085] alloc kstat_irqs on node 0
[ 0.162089] alloc irq_desc for 1276 on node 0
[ 0.162091] alloc kstat_irqs on node 0
[ 0.162094] alloc irq_desc for 1275 on node 0
[ 0.162095] alloc kstat_irqs on node 0
[ 0.162231] installing Xen timer for CPU 1
[ 0.162279] alloc irq_desc for 1274 on node 0
[ 0.162281] alloc kstat_irqs on node 0
[ 0.162304] SMP alternatives: switching to SMP code
[ 0.179927] alloc irq_desc for 1273 on node 0
[ 0.179929] alloc kstat_irqs on node 0
[ 0.179941] alloc irq_desc for 1272 on node 0
[ 0.179942] alloc kstat_irqs on node 0
[ 0.179947] alloc irq_desc for 1271 on node 0
[ 0.179948] alloc kstat_irqs on node 0
[ 0.179952] alloc irq_desc for 1270 on node 0
[ 0.179953] alloc kstat_irqs on node 0
[ 0.000006] Initializing CPU#1
[ 0.000039] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.000041] CPU: L2 cache: 256K
[ 0.000042] CPU: L3 cache: 4096K
[ 0.000045] CPU: Unsupported number of siblings 16
[ 0.180066] installing Xen timer for CPU 2
[ 0.180328] alloc irq_desc for 1269 on node 0
[ 0.180329] alloc kstat_irqs on node 0
[ 0.180349] alloc irq_desc for 1268 on node 0
[ 0.180351] alloc kstat_irqs on node 0
[ 0.180355] alloc irq_desc for 1267 on node 0
[ 0.180357] alloc kstat_irqs on node 0
[ 0.180361] alloc irq_desc for 1266 on node 0
[ 0.180362] alloc kstat_irqs on node 0
[ 0.180366] alloc irq_desc for 1265 on node 0
[ 0.180368] alloc kstat_irqs on node 0
[ 0.000005] Initializing CPU#2
[ 0.000040] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.000043] CPU: L2 cache: 256K
[ 0.000044] CPU: L3 cache: 4096K
[ 0.000048] CPU: Unsupported number of siblings 16
[ 0.180484] installing Xen timer for CPU 3
[ 0.180749] alloc irq_desc for 1264 on node 0
[ 0.180751] alloc kstat_irqs on node 0
[ 0.180769] alloc irq_desc for 1263 on node 0
[ 0.180771] alloc kstat_irqs on node 0
[ 0.180775] alloc irq_desc for 1262 on node 0
[ 0.180776] alloc kstat_irqs on node 0
[ 0.180780] alloc irq_desc for 1261 on node 0
[ 0.180782] alloc kstat_irqs on node 0
[ 0.180785] alloc irq_desc for 1260 on node 0
[ 0.180787] alloc kstat_irqs on node 0
[ 0.000004] Initializing CPU#3
[ 0.000030] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.000032] CPU: L2 cache: 256K
[ 0.000033] CPU: L3 cache: 4096K
[ 0.000036] CPU: Unsupported number of siblings 16
[ 0.180841] Brought up 4 CPUs
[ 0.181107] CPU0 attaching sched-domain:
[ 0.181110] domain 0: span 0-3 level CPU
[ 0.181112] groups: 0 1 2 3
[ 0.181118] CPU1 attaching sched-domain:
[ 0.181120] domain 0: span 0-3 level CPU
[ 0.181122] groups: 1 2 3 0
[ 0.181127] CPU2 attaching sched-domain:
[ 0.181129] domain 0: span 0-3 level CPU
[ 0.181131] groups: 2 3 0 1
[ 0.181136] CPU3 attaching sched-domain:
[ 0.181138] domain 0: span 0-3 level CPU
[ 0.181140] groups: 3 0 1 2
[ 0.181296] devtmpfs: initialized
[ 0.183480] Grant table initialized
[ 0.183526] regulator: core version 0.5
[ 0.183610] NET: Registered protocol family 16
[ 0.185773] alloc irq_desc for 1259 on node 0
[ 0.185775] alloc kstat_irqs on node 0
[ 0.185813] xenbus_probe_init ok
[ 0.185895] ACPI: bus type pci registered
[ 0.186000] PCI: MCFG configuration 0: base e0000000 segment 0 buses
0 - 255
[ 0.186054] PCI: Not using MMCONFIG.
[ 0.186098] PCI: Using configuration type 1 for base access
[ 0.186580] bio: create slab <bio-0> at 0
[ 0.187968] ERROR: Unable to locate IOAPIC for GSI 9
[ 0.188036] ACPI: EC: Look up EC in DSDT
[ 0.191606] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.211422] ACPI: Interpreter enabled
[ 0.211468] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.211612] ACPI: Using IOAPIC for interrupt routing
[ 0.211711] PCI: MCFG configuration 0: base e0000000 segment 0 buses
0 - 255
[ 0.214597] PCI: MCFG area at e0000000 reserved in ACPI motherboard
resources
[ 0.248364] PCI: Using MMCONFIG at e0000000 - efffffff
[ 0.259224] ACPI Warning: Incorrect checksum in table [OEMB] - 6F,
should be 6E (20090903/tbutils-314)
[ 0.260248] ACPI: No dock devices found.
[ 0.260663] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.260844] pci 0000:00:02.0: reg 10 64bit mmio: [0xfb800000-0xfbbfffff]
[ 0.260855] pci 0000:00:02.0: reg 18 64bit mmio pref:
[0xd0000000-0xdfffffff]
[ 0.260862] pci 0000:00:02.0: reg 20 io port: [0xcc00-0xcc07]
[ 0.261000] pci 0000:00:16.0: reg 10 64bit mmio: [0xfbdfb000-0xfbdfb00f]
[ 0.261072] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.261128] pci 0000:00:16.0: PME# disabled
[ 0.261260] pci 0000:00:1a.0: reg 10 32bit mmio: [0xfbdfa000-0xfbdfa3ff]
[ 0.261342] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.261396] pci 0000:00:1a.0: PME# disabled
[ 0.261502] pci 0000:00:1b.0: reg 10 64bit mmio: [0xfbdf4000-0xfbdf7fff]
[ 0.261567] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.261621] pci 0000:00:1b.0: PME# disabled
[ 0.261764] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.261818] pci 0000:00:1c.0: PME# disabled
[ 0.261963] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.262018] pci 0000:00:1c.2: PME# disabled
[ 0.262163] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.262217] pci 0000:00:1c.3: PME# disabled
[ 0.262359] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.262413] pci 0000:00:1c.4: PME# disabled
[ 0.262555] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[ 0.262609] pci 0000:00:1c.5: PME# disabled
[ 0.262742] pci 0000:00:1d.0: reg 10 32bit mmio: [0xfbdf9000-0xfbdf93ff]
[ 0.262823] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.262877] pci 0000:00:1d.0: PME# disabled
[ 0.263178] pci 0000:00:1f.2: reg 10 io port: [0xb880-0xb887]
[ 0.263186] pci 0000:00:1f.2: reg 14 io port: [0xb800-0xb803]
[ 0.263194] pci 0000:00:1f.2: reg 18 io port: [0xb480-0xb487]
[ 0.263202] pci 0000:00:1f.2: reg 1c io port: [0xb400-0xb403]
[ 0.263209] pci 0000:00:1f.2: reg 20 io port: [0xb080-0xb08f]
[ 0.263217] pci 0000:00:1f.2: reg 24 io port: [0xb000-0xb00f]
[ 0.263288] pci 0000:00:1f.3: reg 10 64bit mmio: [0xfbdf8000-0xfbdf80ff]
[ 0.263309] pci 0000:00:1f.3: reg 20 io port: [0x400-0x41f]
[ 0.263376] pci 0000:00:1f.5: reg 10 io port: [0xc880-0xc887]
[ 0.263384] pci 0000:00:1f.5: reg 14 io port: [0xc800-0xc803]
[ 0.263391] pci 0000:00:1f.5: reg 18 io port: [0xc480-0xc487]
[ 0.263399] pci 0000:00:1f.5: reg 1c io port: [0xc400-0xc403]
[ 0.263407] pci 0000:00:1f.5: reg 20 io port: [0xc080-0xc08f]
[ 0.263415] pci 0000:00:1f.5: reg 24 io port: [0xc000-0xc00f]
[ 0.263535] pci 0000:05:00.0: reg 10 io port: [0xec00-0xec07]
[ 0.263546] pci 0000:05:00.0: reg 14 io port: [0xe880-0xe883]
[ 0.263558] pci 0000:05:00.0: reg 18 io port: [0xe800-0xe807]
[ 0.263569] pci 0000:05:00.0: reg 1c io port: [0xe480-0xe483]
[ 0.263580] pci 0000:05:00.0: reg 20 io port: [0xe400-0xe40f]
[ 0.263713] pci 0000:00:1c.0: bridge io port: [0xe000-0xefff]
[ 0.263925] pci 0000:02:00.0: reg 10 io port: [0xd800-0xd8ff]
[ 0.263951] pci 0000:02:00.0: reg 18 64bit mmio pref:
[0xfafff000-0xfaffffff]
[ 0.263970] pci 0000:02:00.0: reg 20 64bit mmio pref:
[0xfaff8000-0xfaffbfff]
[ 0.263981] pci 0000:02:00.0: reg 30 32bit mmio pref:
[0xfbee0000-0xfbeeffff]
[ 0.264035] pci 0000:02:00.0: supports D1 D2
[ 0.264037] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.264092] pci 0000:02:00.0: PME# disabled
[ 0.264221] pci 0000:00:1c.4: bridge io port: [0xd000-0xdfff]
[ 0.264226] pci 0000:00:1c.4: bridge 32bit mmio: [0xfbe00000-0xfbefffff]
[ 0.264234] pci 0000:00:1c.4: bridge 64bit mmio pref:
[0xfaf00000-0xfaffffff]
[ 0.264374] pci 0000:00:1e.0: transparent bridge
[ 0.264470] pci_bus 0000:00: on NUMA node 0
[ 0.264475] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.264751] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR1E._PRT]
[ 0.264887] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR22._PRT]
[ 0.264951] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR23._PRT]
[ 0.265034] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR20._PRT]
[ 0.265106] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR24._PRT]
[ 0.265170] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR25._PRT]
[ 0.285247] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 *10 11 12
14 15)
[ 0.285578] ACPI: PCI Interrupt Link [LNKB] (IRQs *5)
[ 0.285782] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 10 11 12 14
*15)
[ 0.286102] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 *11 12
14 15)
[ 0.286423] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12 14
15) *0, disabled.
[ 0.286804] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11 12
*14 15)
[ 0.287126] ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 6 7 10 11 12
14 15)
[ 0.287449] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 6 *7 10 11 12
14 15)
[ 0.287716] xenbus_probe_backend_init bus registered ok
[ 0.287772] xenbus_probe_frontend_init bus registered ok
[ 0.287820] xen_balloon: Initialising balloon driver with page order 0.
[ 0.287917] vgaarb: device added:
PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.287999] vgaarb: loaded
[ 0.288094] PCI: Using ACPI for IRQ routing
[ 0.288330] Switching to clocksource xen
[ 0.289736] pnp: PnP ACPI init
[ 0.289788] ACPI: bus type pnp registered
[ 0.290166] xen: registering gsi 8 triggering 1 polarity 0
[ 0.290169] xen_allocate_pirq: returning irq 8 for gsi 8
[ 0.290218] xen: --> irq=8
[ 0.290219] Already setup the GSI :8
[ 0.290322] xen: registering gsi 13 triggering 1 polarity 0
[ 0.290324] xen_allocate_pirq: returning irq 13 for gsi 13
[ 0.290373] xen: --> irq=13
[ 0.290375] Already setup the GSI :13
[ 0.291918] xen: registering gsi 4 triggering 1 polarity 0
[ 0.291920] xen_allocate_pirq: returning irq 4 for gsi 4
[ 0.291969] xen: --> irq=4
[ 0.291971] Already setup the GSI :4
[ 0.292331] xen: registering gsi 1 triggering 1 polarity 0
[ 0.292333] xen_allocate_pirq: returning irq 1 for gsi 1
[ 0.292383] xen: --> irq=1
[ 0.292385] Already setup the GSI :1
[ 0.293302] pnp: PnP ACPI: found 14 devices
[ 0.293348] ACPI: ACPI bus type pnp unregistered
[ 0.293402] system 00:01: iomem range 0xfc000000-0xfcffffff has been
reserved
[ 0.293457] system 00:01: iomem range 0xfd000000-0xfdffffff has been
reserved
[ 0.293515] system 00:01: iomem range 0xfe000000-0xfebfffff has been
reserved
[ 0.293569] system 00:01: iomem range 0xfed14000-0xfed19fff has been
reserved
[ 0.293626] system 00:06: ioport range 0x290-0x29f has been reserved
[ 0.293681] system 00:07: ioport range 0x4d0-0x4d1 has been reserved
[ 0.293731] system 00:07: ioport range 0x800-0x87f has been reserved
[ 0.293782] system 00:07: ioport range 0x500-0x57f has been reserved
[ 0.293837] system 00:07: iomem range 0xfed1c000-0xfed1ffff has been
reserved
[ 0.293890] system 00:07: iomem range 0xfed20000-0xfed3ffff has been
reserved
[ 0.293943] system 00:07: iomem range 0xfed40000-0xfed8ffff has been
reserved
[ 0.293999] system 00:0a: iomem range 0xfec00000-0xfec00fff could not
be reserved
[ 0.294076] system 00:0a: iomem range 0xfee00000-0xfee00fff has been
reserved
[ 0.294132] system 00:0c: iomem range 0xe0000000-0xefffffff has been
reserved
[ 0.294189] system 00:0d: iomem range 0x0-0x9ffff could not be reserved
[ 0.294242] system 00:0d: iomem range 0xc0000-0xcffff could not be
reserved
[ 0.294295] system 00:0d: iomem range 0xe0000-0xfffff could not be
reserved
[ 0.294350] system 00:0d: iomem range 0x100000-0xbfffffff could not
be reserved
[ 0.294425] system 00:0d: iomem range 0xfed90000-0xffffffff could not
be reserved
[ 0.298137] PM-Timer failed consistency check (0x0xffffff) - aborting.
[ 0.298264] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:05
[ 0.298315] pci 0000:00:1c.0: IO window: 0xe000-0xefff
[ 0.298369] pci 0000:00:1c.0: MEM window: 0x40000000-0x401fffff
[ 0.298423] pci 0000:00:1c.0: PREFETCH window:
0x00000040200000-0x000000403fffff
[ 0.298505] pci 0000:00:1c.2: PCI bridge, secondary bus 0000:04
[ 0.298557] pci 0000:00:1c.2: IO window: 0x1000-0x1fff
[ 0.298611] pci 0000:00:1c.2: MEM window: 0x40400000-0x405fffff
[ 0.298664] pci 0000:00:1c.2: PREFETCH window:
0x00000040600000-0x000000407fffff
[ 0.298745] pci 0000:00:1c.3: PCI bridge, secondary bus 0000:03
[ 0.298796] pci 0000:00:1c.3: IO window: 0x2000-0x2fff
[ 0.298849] pci 0000:00:1c.3: MEM window: 0x40800000-0x409fffff
[ 0.298900] pci 0000:00:1c.3: PREFETCH window:
0x00000040a00000-0x00000040bfffff
[ 0.298981] pci 0000:00:1c.4: PCI bridge, secondary bus 0000:02
[ 0.299032] pci 0000:00:1c.4: IO window: 0xd000-0xdfff
[ 0.299086] pci 0000:00:1c.4: MEM window: 0xfbe00000-0xfbefffff
[ 0.299140] pci 0000:00:1c.4: PREFETCH window:
0x000000faf00000-0x000000faffffff
[ 0.299221] pci 0000:00:1c.5: PCI bridge, secondary bus 0000:01
[ 0.299272] pci 0000:00:1c.5: IO window: 0x3000-0x3fff
[ 0.299325] pci 0000:00:1c.5: MEM window: 0x40c00000-0x40dfffff
[ 0.299379] pci 0000:00:1c.5: PREFETCH window:
0x00000040e00000-0x00000040ffffff
[ 0.299460] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:06
[ 0.299510] pci 0000:00:1e.0: IO window: disabled
[ 0.299562] pci 0000:00:1e.0: MEM window: disabled
[ 0.299613] pci 0000:00:1e.0: PREFETCH window: disabled
[ 0.299676] pci 0000:00:1c.0: enabling device (0105 -> 0107)
[ 0.299728] xen: registering gsi 17 triggering 0 polarity 1
[ 0.299735] alloc irq_desc for 17 on node 0
[ 0.299737] alloc kstat_irqs on node 0
[ 0.299741] xen: --> irq=17
[ 0.299747] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.299804] pci 0000:00:1c.0: setting latency timer to 64
[ 0.299814] pci 0000:00:1c.2: enabling device (0104 -> 0107)
[ 0.299865] xen: registering gsi 18 triggering 0 polarity 1
[ 0.299868] alloc irq_desc for 18 on node 0
[ 0.299870] alloc kstat_irqs on node 0
[ 0.299872] xen: --> irq=18
[ 0.299875] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.299931] pci 0000:00:1c.2: setting latency timer to 64
[ 0.299941] pci 0000:00:1c.3: enabling device (0104 -> 0107)
[ 0.299993] xen: registering gsi 19 triggering 0 polarity 1
[ 0.299996] alloc irq_desc for 19 on node 0
[ 0.299997] alloc kstat_irqs on node 0
[ 0.300001] xen: --> irq=19
[ 0.300005] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 0.300060] pci 0000:00:1c.3: setting latency timer to 64
[ 0.300070] xen: registering gsi 17 triggering 0 polarity 1
[ 0.300072] xen_allocate_pirq: returning irq 17 for gsi 17
[ 0.300122] xen: --> irq=17
[ 0.300123] Already setup the GSI :17
[ 0.300168] pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.300224] pci 0000:00:1c.4: setting latency timer to 64
[ 0.300234] pci 0000:00:1c.5: enabling device (0104 -> 0107)
[ 0.300286] xen: registering gsi 16 triggering 0 polarity 1
[ 0.300289] alloc irq_desc for 16 on node 0
[ 0.300291] alloc kstat_irqs on node 0
[ 0.300293] xen: --> irq=16
[ 0.300296] pci 0000:00:1c.5: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[ 0.300352] pci 0000:00:1c.5: setting latency timer to 64
[ 0.300361] pci 0000:00:1e.0: setting latency timer to 64
[ 0.300365] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.300367] pci_bus 0000:00: resource 1 mem:
[0x000000-0xffffffffffffffff]
[ 0.300369] pci_bus 0000:05: resource 0 io: [0xe000-0xefff]
[ 0.300371] pci_bus 0000:05: resource 1 mem: [0x40000000-0x401fffff]
[ 0.300373] pci_bus 0000:05: resource 2 pref mem [0x40200000-0x403fffff]
[ 0.300375] pci_bus 0000:04: resource 0 io: [0x1000-0x1fff]
[ 0.300377] pci_bus 0000:04: resource 1 mem: [0x40400000-0x405fffff]
[ 0.300379] pci_bus 0000:04: resource 2 pref mem [0x40600000-0x407fffff]
[ 0.300381] pci_bus 0000:03: resource 0 io: [0x2000-0x2fff]
[ 0.300383] pci_bus 0000:03: resource 1 mem: [0x40800000-0x409fffff]
[ 0.300385] pci_bus 0000:03: resource 2 pref mem [0x40a00000-0x40bfffff]
[ 0.300387] pci_bus 0000:02: resource 0 io: [0xd000-0xdfff]
[ 0.300388] pci_bus 0000:02: resource 1 mem: [0xfbe00000-0xfbefffff]
[ 0.300390] pci_bus 0000:02: resource 2 pref mem [0xfaf00000-0xfaffffff]
[ 0.300392] pci_bus 0000:01: resource 0 io: [0x3000-0x3fff]
[ 0.300394] pci_bus 0000:01: resource 1 mem: [0x40c00000-0x40dfffff]
[ 0.300396] pci_bus 0000:01: resource 2 pref mem [0x40e00000-0x40ffffff]
[ 0.300398] pci_bus 0000:06: resource 3 io: [0x00-0xffff]
[ 0.300400] pci_bus 0000:06: resource 4 mem:
[0x000000-0xffffffffffffffff]
[ 0.300423] NET: Registered protocol family 2
[ 0.300533] IP route cache hash table entries: 32768 (order: 6,
262144 bytes)
[ 0.300782] TCP established hash table entries: 131072 (order: 9,
2097152 bytes)
[ 0.301421] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.301752] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.301807] TCP reno registered
[ 0.301925] NET: Registered protocol family 1
[ 0.301989] pci 0000:00:02.0: Boot video device
[ 0.302091] Unpacking initramfs...
[ 0.322655] Freeing initrd memory: 27459k freed
[ 0.328646] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.328709] DMA: Placing 64MB software IO TLB between
ffff8800045b4000 - ffff8800085b4000
[ 0.328784] DMA: software IO TLB at phys 0x45b4000 - 0x85b4000
[ 0.328907] kvm: no hardware support
[ 0.328954] has_svm: not amd
[ 0.328995] kvm: no hardware support
[ 0.329430] audit: initializing netlink socket (disabled)
[ 0.329494] type=2000 audit(1270022689.836:1): initialized
[ 0.329716] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.330831] VFS: Disk quotas dquot_6.5.2
[ 0.330914] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.331030] msgmni has been set to 1864
[ 0.331272] alg: No test for stdrng (krng)
[ 0.331361] Block layer SCSI generic (bsg) driver version 0.4 loaded
(major 253)
[ 0.331437] io scheduler noop registered
[ 0.331483] io scheduler anticipatory registered
[ 0.331529] io scheduler deadline registered
[ 0.331580] io scheduler cfq registered (default)
[ 0.331760] alloc irq_desc for 1258 on node 0
[ 0.331762] alloc kstat_irqs on node 0
[ 0.331797] pcieport 0000:00:1c.0: setting latency timer to 64
[ 0.331943] alloc irq_desc for 1257 on node 0
[ 0.331945] alloc kstat_irqs on node 0
[ 0.331969] pcieport 0000:00:1c.2: setting latency timer to 64
[ 0.332117] alloc irq_desc for 1256 on node 0
[ 0.332118] alloc kstat_irqs on node 0
[ 0.332142] pcieport 0000:00:1c.3: setting latency timer to 64
[ 0.332286] alloc irq_desc for 1255 on node 0
[ 0.332287] alloc kstat_irqs on node 0
[ 0.332312] pcieport 0000:00:1c.4: setting latency timer to 64
[ 0.332458] alloc irq_desc for 1254 on node 0
[ 0.332459] alloc kstat_irqs on node 0
[ 0.332492] pcieport 0000:00:1c.5: setting latency timer to 64
[ 0.332662] Event-channel device installed.
[ 0.334447] registering netback
[ 0.335447] alloc irq_desc for 1253 on node 0
[ 0.335449] alloc kstat_irqs on node 0
[ 0.335751] hpet_acpi_add: no address or irqs in _CRS
[ 0.335823] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.335989] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.336311] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.336493] input: Macintosh mouse button emulation as
/devices/virtual/input/input0
[ 0.336607] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 0.336657] PNP: PS/2 appears to have AUX port disabled, if this is
incorrect please boot with i8042.nopnp
[ 0.337227] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.337335] mice: PS/2 mouse device common for all mice
[ 0.337409] rtc_cmos 00:03: RTC can wake from S4
[ 0.337492] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 0.337573] rtc0: alarms up to one month, y3k, 114 bytes nvram
[ 0.337631] cpuidle: using governor ladder
[ 0.337676] cpuidle: using governor menu
[ 0.337723] No iBFT detected.
[ 0.340040] TCP cubic registered
[ 0.340163] NET: Registered protocol family 10
[ 0.340895] lo: Disabled Privacy Extensions
[ 0.341123] Mobile IPv6
[ 0.341165] NET: Registered protocol family 17
[ 0.341238] Bridge firewalling registered
[ 0.341345] registered taskstats version 1
[ 0.341915] rtc_cmos 00:03: setting system clock to 2010-03-31
08:04:49 UTC (1270022689)
[ 0.342061] Freeing unused kernel memory: 468k freed
[ 0.342222] Write protecting the kernel read-only data: 4404k
[ 0.359192] input: AT Translated Set 2 keyboard as
/devices/platform/i8042/serio0/input/input1
[ 0.492506] Linux agpgart interface v0.103
[ 0.516565] usbcore: registered new interface driver usbfs
[ 0.516659] usbcore: registered new interface driver hub
[ 0.516759] usbcore: registered new device driver usb
[ 0.340740] Uniform Multi-Platform E-IDE driver
[ 0.523982] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.524073] xen: registering gsi 16 triggering 0 polarity 1
[ 0.524076] xen_allocate_pirq: returning irq 16 for gsi 16
[ 0.524128] xen: --> irq=16
[ 0.524131] Already setup the GSI :16
[ 0.524187] ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low)
-> IRQ 16
[ 0.524276] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[ 0.524282] ehci_hcd 0000:00:1a.0: EHCI Host Controller
[ 0.524368] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned
bus number 1
[ 0.524551] ehci_hcd 0000:00:1a.0: debug port 2
[ 0.528517] ehci_hcd 0000:00:1a.0: cache line size of 32 is not supported
[ 0.528551] ehci_hcd 0000:00:1a.0: irq 16, io mem 0xfbdfa000
[ 0.544457] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 0.544571] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.544632] usb usb1: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 0.544720] usb usb1: Product: EHCI Host Controller
[ 0.544775] usb usb1: Manufacturer: Linux 2.6.32.10-pvops-dom0 ehci_hcd
[ 0.544834] usb usb1: SerialNumber: 0000:00:1a.0
[ 0.544995] usb usb1: configuration #1 chosen from 1 choice
[ 0.545093] hub 1-0:1.0: USB hub found
[ 0.545169] hub 1-0:1.0: 2 ports detected
[ 0.545324] xen: registering gsi 23 triggering 0 polarity 1
[ 0.545336] alloc irq_desc for 23 on node 0
[ 0.545338] alloc kstat_irqs on node 0
[ 0.545344] xen: --> irq=23
[ 0.545355] ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low)
-> IRQ 23
[ 0.545445] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[ 0.545451] ehci_hcd 0000:00:1d.0: EHCI Host Controller
[ 0.545517] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned
bus number 2
[ 0.545659] ehci_hcd 0000:00:1d.0: debug port 2
[ 0.549609] ehci_hcd 0000:00:1d.0: cache line size of 32 is not supported
[ 0.549640] ehci_hcd 0000:00:1d.0: irq 23, io mem 0xfbdf9000
[ 0.373232] SCSI subsystem initialized
[ 0.557052] input: Power Button as
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
[ 0.568433] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 0.568545] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.568605] usb usb2: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 0.568686] usb usb2: Product: EHCI Host Controller
[ 0.568741] usb usb2: Manufacturer: Linux 2.6.32.10-pvops-dom0 ehci_hcd
[ 0.568800] usb usb2: SerialNumber: 0000:00:1d.0
[ 0.568960] usb usb2: configuration #1 chosen from 1 choice
[ 0.569054] hub 2-0:1.0: USB hub found
[ 0.569122] hub 2-0:1.0: 2 ports detected
[ 0.573845] ACPI: Power Button [PWRB]
[ 0.573976] input: Power Button as
/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 0.574057] ACPI: Power Button [PWRF]
[ 0.574683] libata version 3.00 loaded.
[ 0.585516] agpgart-intel 0000:00:00.0: Intel IGDNG/D Chipset
[ 0.406655] xen: registering gsi 16 triggering 0 polarity 1
[ 0.406659] xen_allocate_pirq: returning irq 16 for gsi 16
[ 0.406715] xen: --> irq=16
[ 0.406718] Already setup the GSI :16
[ 0.406770] pata_jmicron 0000:05:00.0: PCI INT A -> GSI 16 (level,
low) -> IRQ 16
[ 0.406888] pata_jmicron 0000:05:00.0: setting latency timer to 64
[ 0.589321] agpgart-intel 0000:00:00.0: detected 131068K stolen memory
[ 0.413302] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 0.413389] xen: registering gsi 16 triggering 0 polarity 1
[ 0.413393] xen_allocate_pirq: returning irq 16 for gsi 16
[ 0.413449] xen: --> irq=16
[ 0.413452] Already setup the GSI :16
[ 0.413508] r8169 0000:02:00.0: PCI INT A -> GSI 16 (level, low) ->
IRQ 16
[ 0.413625] r8169 0000:02:00.0: setting latency timer to 64
[ 0.413690] alloc irq_desc for 1252 on node 0
[ 0.413693] alloc kstat_irqs on node 0
[ 0.414317] eth0: RTL8168d/8111d at 0xffffc90000072000,
e0:cb:4e:d3:bd:bc, XID 083000c0 IRQ 1252
[ 0.419107] scsi0 : pata_jmicron
[ 0.469676] scsi1 : pata_jmicron
[ 0.649801] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[ 0.469039] ata_piix 0000:00:1f.2: version 2.13
[ 0.469072] xen: registering gsi 21 triggering 0 polarity 1
[ 0.469080] alloc irq_desc for 21 on node 0
[ 0.469083] alloc kstat_irqs on node 0
[ 0.469107] xen: --> irq=21
[ 0.469117] ata_piix 0000:00:1f.2: PCI INT D -> GSI 21 (level, low)
-> IRQ 21
[ 0.469182] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[ 0.469381] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 0.469851] scsi2 : ata_piix
[ 0.469990] scsi3 : ata_piix
[ 0.470726] ata1: PATA max UDMA/100 cmd 0xec00 ctl 0xe880 bmdma
0xe400 irq 16
[ 0.470787] ata2: PATA max UDMA/100 cmd 0xe800 ctl 0xe480 bmdma
0xe408 irq 16
[ 0.472693] ata3: SATA max UDMA/133 cmd 0xb880 ctl 0xb800 bmdma
0xb080 irq 21
[ 0.472753] ata4: SATA max UDMA/133 cmd 0xb480 ctl 0xb400 bmdma
0xb088 irq 21
[ 0.472831] xen: registering gsi 21 triggering 0 polarity 1
[ 0.472833] xen_allocate_pirq: returning irq 21 for gsi 21
[ 0.472885] xen: --> irq=21
[ 0.472887] Already setup the GSI :21
[ 0.472960] ata_piix 0000:00:1f.5: PCI INT D -> GSI 21 (level, low)
-> IRQ 21
[ 0.473017] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
[ 0.473171] ata_piix 0000:00:1f.5: setting latency timer to 64
[ 0.473232] scsi4 : ata_piix
[ 0.473333] scsi5 : ata_piix
[ 0.475012] ata5: SATA max UDMA/133 cmd 0xc880 ctl 0xc800 bmdma
0xc080 irq 21
[ 0.475069] ata6: SATA max UDMA/133 cmd 0xc480 ctl 0xc400 bmdma
0xc088 irq 21
[ 0.856378] usb 1-1: new high speed USB device using ehci_hcd and
address 2
[ 0.983401] ata5: SATA link down (SStatus 0 SControl 300)
[ 0.994509] ata6: SATA link down (SStatus 0 SControl 300)
[ 1.008728] usb 1-1: New USB device found, idVendor=8087, idProduct=0020
[ 1.008802] usb 1-1: New USB device strings: Mfr=0, Product=0,
SerialNumber=0
[ 1.008902] usb 1-1: configuration #1 chosen from 1 choice
[ 1.009114] hub 1-1:1.0: USB hub found
[ 1.009213] hub 1-1:1.0: 6 ports detected
[ 1.092861] ata1.00: ATAPI: Pioneer DVD-ROM ATAPIModel DVD-116 0122,
E1.22, max UDMA/66
[ 1.108896] ata1.00: configured for UDMA/66
[ 0.931390] scsi 0:0:0:0: CD-ROM PIONEER DVD-ROM DVD-116
1.22 PQ: 0 ANSI: 5
[ 1.120291] usb 2-1: new high speed USB device using ehci_hcd and
address 2
[ 1.252630] usb 2-1: New USB device found, idVendor=8087, idProduct=0020
[ 1.252703] usb 2-1: New USB device strings: Mfr=0, Product=0,
SerialNumber=0
[ 1.252804] usb 2-1: configuration #1 chosen from 1 choice
[ 1.253020] hub 2-1:1.0: USB hub found
[ 1.253119] hub 2-1:1.0: 8 ports detected
[ 1.460259] ata4.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.460323] ata4.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.460569] ata3.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.460631] ata3.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.477375] ata4.00: ATA-8: WDC WD5000AADS-00S9B0, 01.00A01, max UDMA/133
[ 1.477439] ata4.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 1.486131] ata3.00: ATA-7: WDC WD5000AAKS-00TMA0, 12.01C01, max UDMA/133
[ 1.486193] ata3.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 1.515969] ata4.01: ATA-7: WDC WD5000AAKS-07TMA0, 12.01C01, max UDMA/133
[ 1.516031] ata4.01: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 1.522526] ata3.01: HPA detected: current 312579695, native 312581808
[ 1.522589] ata3.01: ATA-7: WDC WD1600AAJS-08PSA0, 05.06H05, max UDMA/133
[ 1.522636] ata3.01: 312579695 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 1.524398] usb 2-1.6: new low speed USB device using ehci_hcd and
address 3
[ 1.525451] ata4.00: configured for UDMA/133
[ 1.532979] ata3.00: configured for UDMA/133
[ 1.540735] ata4.01: configured for UDMA/133
[ 1.548995] ata3.01: configured for UDMA/133
[ 1.549112] scsi 2:0:0:0: Direct-Access ATA WDC WD5000AAKS-0
12.0 PQ: 0 ANSI: 5
[ 1.549334] scsi 2:0:1:0: Direct-Access ATA WDC WD1600AAJS-0
05.0 PQ: 0 ANSI: 5
[ 1.549559] scsi 3:0:0:0: Direct-Access ATA WDC WD5000AADS-0
01.0 PQ: 0 ANSI: 5
[ 1.549790] scsi 3:0:1:0: Direct-Access ATA WDC WD5000AAKS-0
12.0 PQ: 0 ANSI: 5
[ 1.376650] sd 2:0:0:0: [sda] 976773168 512-byte logical blocks: (500
GB/465 GiB)
[ 1.376293] sd 2:0:1:0: [sdb] 312579695 512-byte logical blocks: (160
GB/149 GiB)
[ 1.376389] sd 2:0:1:0: [sdb] Write Protect is off
[ 1.376391] sd 2:0:1:0: [sdb] Mode Sense: 00 3a 00 00
[ 1.376435] sd 2:0:1:0: [sdb] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 1.556706] sd 3:0:1:0: [sdd] 976773168 512-byte logical blocks: (500
GB/465 GiB)
[ 1.556721] sd 3:0:0:0: [sdc] 976773168 512-byte logical blocks: (500
GB/465 GiB)
[ 1.556803] sd 3:0:0:0: [sdc] Write Protect is off
[ 1.556805] sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 1.556818] sd 3:0:1:0: [sdd] Write Protect is off
[ 1.556820] sd 3:0:1:0: [sdd] Mode Sense: 00 3a 00 00
[ 1.556857] sd 3:0:0:0: [sdc] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 1.556907] sd 3:0:1:0: [sdd] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 1.376692] sdb:
[ 1.557192] sdd: sdd1 sdd2
[ 1.567603] sdb1
[ 1.387800] sd 2:0:0:0: [sda] Write Protect is off
[ 1.387848] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.387877] sd 2:0:0:0: [sda] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 1.567891] sd 2:0:1:0: [sdb] Attached SCSI disk
[ 1.388087] sda: sda1 sda2
[ 1.574926] sd 2:0:0:0: [sda] Attached SCSI disk
[ 1.589233] sdc: sdc1 sdc2
[ 1.620841] sd 3:0:1:0: [sdd] Attached SCSI disk
[ 1.620984] sd 3:0:0:0: [sdc] Attached SCSI disk
[ 1.621469] usb 2-1.6: New USB device found, idVendor=045e,
idProduct=0040
[ 1.621525] usb 2-1.6: New USB device strings: Mfr=1, Product=3,
SerialNumber=0
[ 1.621598] usb 2-1.6: Product: Microsoft 3-Button Mouse with
IntelliEye(TM)
[ 1.621652] usb 2-1.6: Manufacturer: Microsoft
[ 1.621788] usb 2-1.6: configuration #1 chosen from 1 choice
[ 1.629697] sr0: scsi3-mmc drive: 40x/40x cd/rw xa/form2 cdda tray
[ 1.629750] Uniform CD-ROM driver Revision: 3.20
[ 1.629878] sr 0:0:0:0: Attached scsi CD-ROM sr0
[ 1.632571] usbcore: registered new interface driver hiddev
[ 1.663848] input: Microsoft Microsoft 3-Button Mouse with
IntelliEye(TM) as
/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/2-1.6:1.0/input/input4
[ 1.484338] sr 0:0:0:0: Attached scsi generic sg0 type 5
[ 1.664275] generic-usb 0003:045E:0040.0001: input,hidraw0: USB HID
v1.10 Mouse [Microsoft Microsoft 3-Button Mouse with IntelliEye(TM)] on
usb-0000:00:1d.0-1.6/input0
[ 1.664299] usbcore: registered new interface driver usbhid
[ 1.664302] usbhid: v2.6:USB HID core driver
[ 1.486583] sd 2:0:0:0: Attached scsi generic sg1 type 0
[ 1.486850] sd 2:0:1:0: Attached scsi generic sg2 type 0
[ 1.486966] sd 3:0:0:0: Attached scsi generic sg3 type 0
[ 1.487085] sd 3:0:1:0: Attached scsi generic sg4 type 0
[ 1.993477] md: raid1 personality registered for level 1
[ 2.009765] md: md0 stopped.
[ 2.011219] md: bind<sdc1>
[ 2.011493] md: bind<sda1>
[ 2.013356] raid1: raid set md0 active with 2 out of 2 mirrors
[ 2.013495] md0: detected capacity change from 0 to 509804544
[ 2.016624] md0: unknown partition table
[ 2.074583] md: md1 stopped.
[ 2.076046] md: bind<sdc2>
[ 2.076334] md: bind<sda2>
[ 2.078527] raid1: raid set md1 active with 2 out of 2 mirrors
[ 2.078607] md1: detected capacity change from 0 to 489601499136
[ 1.900755] md1: unknown partition table
[ 1.874040] device-mapper: uevent: version 1.0.3
[ 1.874349] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01)
initialised: dm-devel@xxxxxxxxxx
[ 2.131581] PM: Starting manual resume from disk
[ 2.370526] kjournald starting. Commit interval 5 seconds
[ 2.370583] EXT3-fs: mounted filesystem with ordered data mode.
[ 3.900314] udev: starting version 151
[ 4.839409] xen: registering gsi 18 triggering 0 polarity 1
[ 4.839413] xen_allocate_pirq: returning irq 18 for gsi 18
[ 4.839469] xen: --> irq=18
[ 4.839472] Already setup the GSI :18
[ 4.839520] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low)
-> IRQ 18
[ 4.839594] ACPI: I/O resource 0000:00:1f.3 [0x400-0x41f] conflicts
with ACPI region SMRG [0x400-0x40f]
[ 4.839671] ACPI: If an ACPI driver is available for this device, you
should use it instead of the native driver
[ 4.990257] input: PC Speaker as /devices/platform/pcspkr/input/input5
[ 5.277801] xen: registering gsi 22 triggering 0 polarity 1
[ 5.277810] alloc irq_desc for 22 on node 0
[ 5.277813] alloc kstat_irqs on node 0
[ 5.277817] xen: --> irq=22
[ 5.277825] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low)
-> IRQ 22
[ 5.277951] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 5.406338] hda_codec: ALC889: BIOS auto-probing.
[ 5.407781] input: HDA Digital PCBeep as
/devices/pci0000:00/0000:00:1b.0/input/input6
[ 6.173626] EXT3 FS on dm-0, internal journal
[ 6.584451] loop: module loaded
[ 8.523888] fuse init (API version 7.13)
[ 8.569106] kjournald starting. Commit interval 5 seconds
[ 8.581775] EXT3 FS on md0, internal journal
[ 8.581837] EXT3-fs: mounted filesystem with ordered data mode.
[ 8.605131] kjournald starting. Commit interval 5 seconds
[ 8.605194] EXT3-fs warning: maximal mount count reached, running
e2fsck is recommended
[ 8.605515] EXT3 FS on sdb1, internal journal
[ 8.605605] EXT3-fs: mounted filesystem with ordered data mode.
[ 8.655899] kjournald starting. Commit interval 5 seconds
[ 8.655960] EXT3-fs warning: maximal mount count reached, running
e2fsck is recommended
[ 8.656349] EXT3 FS on sdd1, internal journal
[ 8.656440] EXT3-fs: mounted filesystem with ordered data mode.
[ 8.689657] Adding 4194296k swap on /dev/mapper/vg00-swap.
Priority:-1 extents:1 across:4194296k
[ 9.737564] r8169: eth0: link up
[ 9.737743] r8169: eth0: link up
[ 17.892224] r8169: peth0: link up
[ 18.101146] device peth0 entered promiscuous mode
[ 18.114015] eth0: port 1(peth0) entering forwarding state
[ 18.601344] alloc irq_desc for 1251 on node 0
[ 18.601347] alloc kstat_irqs on node 0
[ 18.803241] xenbus_probe wake_waiting
[ 18.601391] alloc irq_desc for 1250 on node 0
[ 18.601393] alloc kstat_irqs on node 0
[ 18.803305] xenbus_probe wake_waiting
[ 18.808788] XENBUS: Unable to read cpu state
[ 18.811516] XENBUS: Unable to read cpu state
[ 18.811669] XENBUS: Unable to read cpu state
[ 18.811806] XENBUS: Unable to read cpu state
[ 18.812042] xenbus_probe_devices backend
[ 18.812890] xenbus_probe_devices failed xenbus_directory
[ 18.812939] backend_probe_and_watch devices probed ok
[ 18.813082] backend_probe_and_watch watch add ok ok
[ 18.813129] backend_probe_and_watch all done
[ 18.813176] xenbus_probe_devices device
[ 18.813302] xenbus_probe_devices failed xenbus_directory
[ 18.813353] frontend_probe_and_watch devices probed ok
[ 18.813524] frontend_probe_and_watch watch add ok ok
[ 18.813578] frontend_probe_and_watch all done
[ 21.894460] Bluetooth: Core ver 2.15
[ 21.894546] NET: Registered protocol family 31
[ 21.894597] Bluetooth: HCI device and connection manager initialized
[ 21.894655] Bluetooth: HCI socket layer initialized
[ 21.909216] Bluetooth: L2CAP ver 2.14
[ 21.909264] Bluetooth: L2CAP socket layer initialized
[ 21.912389] Bluetooth: RFCOMM TTY layer initialized
[ 21.912442] Bluetooth: RFCOMM socket layer initialized
[ 21.912490] Bluetooth: RFCOMM ver 1.11
[ 22.001600] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 22.001647] Bluetooth: BNEP filters: protocol multicast
[ 21.845433] Bluetooth: SCO (Voice Link) ver 0.6
[ 21.845503] Bluetooth: SCO socket layer initialized
[ 22.943839] lp: driver loaded but no devices found
[ 22.964953] ppdev: user-space parallel port driver
[ 23.720534] [drm] Initialized drm 1.1.0 20060810
[ 23.798706] xen: registering gsi 16 triggering 0 polarity 1
[ 23.798709] xen_allocate_pirq: returning irq 16 for gsi 16
[ 23.798711] xen: --> irq=16
[ 23.798713] Already setup the GSI :16
[ 23.798717] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 23.798723] i915 0000:00:02.0: setting latency timer to 64
[ 23.637546] mtrr: type mismatch for d0000000,10000000 old: write-back
new: write-combining
[ 23.637553] [drm] MTRR allocation failed. Graphics performance may
suffer.
[ 23.637771] alloc irq_desc for 1249 on node 0
[ 23.637774] alloc kstat_irqs on node 0
[ 23.637817] [drm] set up 127M of stolen space
[ 23.986808] BUG: unable to handle kernel paging request at
ffffc9000007c000
[ 23.986815] IP: [<ffffffffa00dc0df>]
intel_i915_chipset_flush+0x11/0x14 [intel_agp]
[ 23.986823] PGD 3f80c067 PUD 3f80d067 PMD 3f80e067 PTE 0
[ 23.986828] Oops: 0002 [#1] SMP
[ 23.986831] last sysfs file: /sys/module/agpgart/initstate
[ 23.986833] CPU 3
[ 23.986835] Modules linked in: i915(+) drm_kms_helper drm
i2c_algo_bit video output ppdev lp parport sco bnep rfcomm l2cap crc16
bluetooth rfkill battery cpufreq_stats cpufreq_userspace
cpufreq_conservative cpufreq_powersave fuse hwmon_vid k8temp eeprom
i2c_nforce2 firewire_sbp2 firewire_core crc_itu_t loop
snd_hda_codec_intelhdmi snd_hda_codec_realtek snd_hda_intel
snd_hda_codec snd_hwdep snd_pcm_oss snd_mixer_oss snd_pcm snd_seq_midi
snd_rawmidi snd_seq_midi_event snd_seq snd_timer snd_seq_device
asus_atk0110 processor pcspkr i2c_i801 i2c_core evdev snd soundcore
snd_page_alloc ext3 jbd mbcache dm_mod raid1 md_mod sg usbhid hid sr_mod
cdrom sd_mod crc_t10dif ata_generic r8169 mii ata_piix pata_jmicron
intel_agp libata scsi_mod ehci_hcd ide_pci_generic ide_core button
usbcore nls_base agpgart thermal fan thermal_sys [last unloaded:
scsi_wait_scan]
[ 23.986900] Pid: 2526, comm: modprobe Not tainted
2.6.32.10-pvops-dom0 #31 System Product Name
[ 23.986902] RIP: e030:[<ffffffffa00dc0df>] [<ffffffffa00dc0df>]
intel_i915_chipset_flush+0x11/0x14 [intel_agp]
[ 23.986907] RSP: e02b:ffff88003fbefb10 EFLAGS: 00010286
[ 23.986909] RAX: ffffc9000007c000 RBX: ffff88003d901c00 RCX:
0000000000001000
[ 23.986911] RDX: 0000000000000001 RSI: 00000000000007e9 RDI:
ffff880002295c00
[ 23.986913] RBP: ffff88003f352000 R08: ffff88003fbee000 R09:
ffff88003fbee000
[ 23.986915] R10: 0000000000000040 R11: ffff8800016a3000 R12:
0000000000000001
[ 23.986916] R13: ffff8800023df0c0 R14: 0000000000000001 R15:
0000000000000001
[ 23.986922] FS: 00007fdbe68c36f0(0000) GS:ffff880003440000(0000)
knlGS:0000000000000000
[ 23.986924] CS: e033 DS: 0000 ES: 0000 CR0: 000000008005003b
[ 23.986926] CR2: ffffc9000007c000 CR3: 000000000219f000 CR4:
0000000000002660
[ 23.986928] DR0: 0000000000000000 DR1: 0000000000000000 DR2:
0000000000000000
[ 23.986930] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7:
0000000000000400
[ 23.986932] Process modprobe (pid: 2526, threadinfo ffff88003fbee000,
task ffff880002a4f000)
[ 23.986934] Stack:
[ 23.986936] ffffffffa03013e3 ffff88003d901c00 ffff88003d901c00
0000000000000000
[ 23.986939] <0> ffffffffa0302971 ffff8800023df0c0 ffff88003f352000
0000000000000000
[ 23.986943] <0> ffff88003f847000 ffff88003d901c00 0000000000000438
ffff8800023df0c0
[ 23.986948] Call Trace:
[ 23.986961] [<ffffffffa03013e3>] ?
i915_gem_object_flush_cpu_write_domain+0x20/0x3e [i915]
[ 23.986972] [<ffffffffa0302971>] ?
i915_gem_object_set_to_gtt_domain+0x58/0x9a [i915]
[ 23.986984] [<ffffffffa031a649>] ? intelfb_create+0x1de/0x5c1 [i915]
[ 23.986988] [<ffffffffa02ecba4>] ?
drm_fb_helper_single_fb_probe+0x1c9/0x415 [drm_kms_helper]
[ 23.986994] [<ffffffff81036ca2>] ? check_events+0x12/0x20
[ 23.987005] [<ffffffffa031a46b>] ? intelfb_create+0x0/0x5c1 [i915]
[ 23.987008] [<ffffffff81036c8f>] ? xen_restore_fl_direct_end+0x0/0x1
[ 23.987012] [<ffffffffa02ef226>] ?
drm_helper_initial_config+0x56/0x5a [drm_kms_helper]
[ 23.987021] [<ffffffffa02faa93>] ? i915_driver_load+0xe65/0xf10 [i915]
[ 23.987027] [<ffffffffa02cfbf8>] ? drm_get_minor+0x226/0x27d [drm]
[ 23.987032] [<ffffffffa02cff6a>] ? drm_get_dev+0x31b/0x427 [drm]
[ 23.987037] [<ffffffff811bbed5>] ? local_pci_probe+0x12/0x16
[ 23.987039] [<ffffffff811bca9c>] ? pci_device_probe+0x58/0x84
[ 23.987043] [<ffffffff8123ae91>] ? driver_sysfs_add+0x42/0x69
[ 23.987046] [<ffffffff8123afc1>] ? driver_probe_device+0x9c/0x123
[ 23.987049] [<ffffffff8123b097>] ? __driver_attach+0x4f/0x6f
[ 23.987052] [<ffffffff8123b048>] ? __driver_attach+0x0/0x6f
[ 23.987055] [<ffffffff8123a690>] ? bus_for_each_dev+0x44/0x78
[ 23.987058] [<ffffffff8123aade>] ? bus_add_driver+0xa8/0x1f2
[ 23.987061] [<ffffffff8123b33c>] ? driver_register+0x8f/0xf7
[ 23.987063] [<ffffffff811bcccd>] ? __pci_register_driver+0x4e/0xbe
[ 23.987072] [<ffffffffa0337000>] ? i915_init+0x0/0x52 [i915]
[ 23.987079] [<ffffffffa0337000>] ? i915_init+0x0/0x52 [i915]
[ 23.987083] [<ffffffff8100a087>] ? do_one_initcall+0x63/0x191
[ 23.987086] [<ffffffff8109f9a6>] ? sys_init_module+0xc6/0x220
[ 23.987090] [<ffffffff81039c42>] ? system_call_fastpath+0x16/0x1b
[ 23.987091] Code: 48 8b 4f 08 48 63 d2 48 89 f0 48 c1 e2 04 48 8b 49
20 48 0b 04 0a c3 31 c0 c3 48 8b 05 43 58 00 00 48 85 c0 74 07 ba 01 00
00 00 <89> 10 c3 48 8b 15 07 58 00 00 48 8b 8a e8 02 00 00 48 85 c9 75
[ 23.987130] RIP [<ffffffffa00dc0df>]
intel_i915_chipset_flush+0x11/0x14 [intel_agp]
[ 23.987134] RSP <ffff88003fbefb10>
[ 23.987135] CR2: ffffc9000007c000
[ 23.987138] ---[ end trace 92fec4cdf129d18d ]---
[ 29.072420] eth0: no IPv6 routers present
[ 28.872271] peth0: no IPv6 routers present
_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-devel
| 
Home