On Tue, Mar 23, 2010 at 01:04:34PM -0700, kishore kumar wrote:
> attached is the screen shot.
>
> I did
> cd /lib/modules/[1]2.6.32.10/kernel/drivers/xen
> modprobe xen-evtchn
>
> and then did
>
> mount -t xenfs none /proc/xen.
>
> But still the same problem.
>
Does the mount succeed? Is there anything under /proc/xen?
-- Pasi
> On Tue, Mar 23, 2010 at 12:51 PM, Pasi Kärkkäinen <[2]pasik@xxxxxx> wrote:
>
> On Tue, Mar 23, 2010 at 12:43:16PM -0700, kishore kumar wrote:
> > I have the Xen 3.4.3.rc4 installed alone with
> >
> > make xen
> >
> > make stubdom,
> >
> > make tools
> >
> > make install-xen
> > make install-tools
> > make install-stubdom
> >
> >
> > and pulled dom 0 kernel from
> >
> > git clone
> git://[1][3]git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
> > and compiled the kernel.
> >
> > modified the grub.conf as below
> >
> > title xen/pvops (2.6.32.10)
> > root (hd0,0)
> > kernel /xen.gz loglvl=all guest_loglvl=all sync_console
> > console_to_ring com1=115200,8n1 console=vga,com1 lapic=debug
> > apic_verbosity=debug apic=debug iommu=1 msi=1
> > module /vmlinuz-2.6.32.10 ro root=/dev/VolGroup01/LogVol00
> > console=hvc0 earlyprintk=xen nomodeset initcall_debug debug
> loglevel=10
> > module /initrd-2.6.32.10.img
> >
> > and rebooted the machine. I hope this is a Xen+ dom0. Please
> correct me
> > if I am wrong here.
> >
> > After reboot I see
> > Starting xend: grep: /proc/xen/capabilities: No such file or
> directory
> >
> > I added none /proc/xen xenfs defaults 0 0 in /etc/fstab file and
> > rebooted. still the same problem.
> >
> > Is there anything else that needs to be done?
> >
>
> So is that version of xend automatically loading xen-evtchn.ko driver
> module?
> Try loading the module with "modprobe xen-evtchn" and then try mounting
> the /proc/xen.
> > Am I booted with Xen+dom0 or just the linux kernel?
> >
>
> Most probably to Xen+dom0, if you chose the grub entry you pasted above.
>
> -- Pasi
> > My uname -a is
> >
> > Linux localhost.localdomain 2.6.32.10
> >
> > Thanks
> >
> >
> > On Tue, Mar 23, 2010 at 12:23 AM, Pasi Kärkkäinen
> <[2][4]pasik@xxxxxx> wrote:
> >
> > On Mon, Mar 22, 2010 at 05:00:41PM -0700, kishore kumar wrote:
> > > Hi all,
> > >
> > > I see the below message after I install xen3.4.3-rc4 and
> pvops dom
> > 0
> > > kernel 2.6.32.10 and reboot the machine.
> > >
> > > Starting xend: grep: /proc/xen/capabilities: No such file
> or
> > directory
> > >
> > > I did below steps too.
> > >
> > > step 1: insmod xen-evtchn.ko
> > > step 2: Added none /proc/xen xenfs defaults 0 0 in
> /etc/fstab
> > file.
> > >
> > > Is there something that I am missing here?
> >
> > Well then actually mount /proc/xen :)
> > (or reboot).
> >
> > Also did you verify you've actually rebooted to Xen+dom0?
> > -- Pasi
> >
> > References
> >
> > Visible links
> > 1. [5]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
> > 2. mailto:[6]pasik@xxxxxx
>
> References
>
> Visible links
> 1. http://2.6.32.10/kernel/drivers/xen
> 2. mailto:pasik@xxxxxx
> 3. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
> 4. mailto:pasik@xxxxxx
> 5. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
> 6. mailto:pasik@xxxxxx
_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-devel
|
Home