root (hd0,0) Filesystem type is ext2fs, partition type 0x83 kernel /xen noreboot com1=115200,8n1,0x3f8,0 sync_console console=com1 loglvl= all guest_loglvl=all vtd=1 iommu dom0_mem=1G [Multiboot-elf, <0x100000:0x16d000:0xbe000>, shtab=0x32b078, entry=0x100000] module /vmlinuz-2.6.18.8 root=/dev/mapper/sam-root_x86_64 console=ttyS0 loglev el=8 ro acpi_dbg_layer=0xffff0000 acpi_dbg_level=0xffffffff [Multiboot-module @ 0x32c000, 0x76ce88 bytes] module /initrd.img-2.6.18.8 [Multiboot-module @ 0xa99000, 0x761000 bytes] __ __ _ _ ___ ___ _____ \ \/ /___ _ __ | || | / _ \ / _ \ _ __ ___|___ / _ __ _ __ ___ \ // _ \ '_ \ | || |_| | | | | | |__| '__/ __| |_ \ __| '_ \| '__/ _ \ / \ __/ | | | |__ _| |_| | |_| |__| | | (__ ___) |__| |_) | | | __/ /_/\_\___|_| |_| |_|(_)___(_)___/ |_| \___|____/ | .__/|_| \___| |_| (XEN) Xen version 4.0.0-rc3-pre (horms@xxxxxxxxxxxxxxxxxxxxxxxx) (gcc version 4.3.2 (Debian 4.3.2-1.1) ) Mon Feb 8 14:51:01 JST 2010 (XEN) Latest ChangeSet: Fri Feb 05 13:57:20 2010 +0000 20905:b60379dad533 (XEN) Console output is synchronous. (XEN) Command line: noreboot com1=115200,8n1,0x3f8,0 sync_console console=com1 loglvl=all guest_loglvl=all vtd=1 iommu dom0_mem=1G (XEN) Video information: (XEN) VGA is text mode 80x25, font 8x16 (XEN) VBE/DDC methods: none; EDID transfer time: 0 seconds (XEN) EDID info not retrieved because no DDC retrieval method detected (XEN) Disc information: (XEN) Found 1 MBR signatures (XEN) Found 1 EDD information structures (XEN) Xen-e820 RAM map: (XEN) 0000000000000000 - 000000000009fc00 (usable) (XEN) 000000000009fc00 - 00000000000a0000 (reserved) (XEN) 00000000000e8000 - 0000000000100000 (reserved) (XEN) 0000000000100000 - 00000000defafe00 (usable) (XEN) 00000000defafe00 - 00000000defb1ea0 (ACPI NVS) (XEN) 00000000defb1ea0 - 00000000e0000000 (reserved) (XEN) 00000000f4000000 - 00000000f8000000 (reserved) (XEN) 00000000fec00000 - 00000000fed40000 (reserved) (XEN) 00000000fed45000 - 0000000100000000 (reserved) (XEN) 0000000100000000 - 000000011c000000 (usable) (XEN) ACPI: RSDP 000E5C10, 0014 (r0 COMPAQ) (XEN) ACPI: RSDT DEFC1E40, 0044 (r1 HPQOEM SLIC-BPC 20090226 0) (XEN) ACPI: FACP DEFC1EE8, 0074 (r1 COMPAQ BEARLAKE 1 0) (XEN) ACPI: DSDT DEFC2427, A370 (r1 COMPAQ DSDT_PRJ 1 MSFT 100000E) (XEN) ACPI: FACS DEFC1E00, 0040 (XEN) ACPI: APIC DEFC1F5C, 0084 (r1 COMPAQ BEARLAKE 1 0) (XEN) ACPI: ASF! DEFC1FE0, 0063 (r32 COMPAQ BEARLAKE 1 0) (XEN) ACPI: MCFG DEFC2043, 003C (r1 COMPAQ BEARLAKE 1 0) (XEN) ACPI: TCPA DEFC207F, 0032 (r1 COMPAQ BEARLAKE 1 0) (XEN) ACPI: SLIC DEFC20B1, 0176 (r1 HPQOEM SLIC-BPC 1 0) (XEN) ACPI: HPET DEFC2227, 0038 (r1 COMPAQ BEARLAKE 1 0) (XEN) ACPI: DMAR DEFC225F, 0198 (r1 COMPAQ BEARLAKE 1 0) (XEN) System RAM: 3997MB (4093656kB) (XEN) No NUMA configuration found (XEN) Faking a node at 0000000000000000-000000011c000000 (XEN) Domain heap initialised (XEN) found SMP MP-table at 000f9bf0 (XEN) DMI 2.5 present. (XEN) Using APIC driver default (XEN) ACPI: PM-Timer IO Port: 0xf808 (XEN) ACPI: ACPI SLEEP INFO: pm1x_cnt[f804,460], pm1x_evt[f800,0] (XEN) ACPI: wakeup_vec[defc1e0c], vec_size[20] (XEN) ACPI: Local APIC address 0xfee00000 (XEN) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) (XEN) Processor #0 7:7 APIC version 20 (XEN) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) (XEN) Processor #1 7:7 APIC version 20 (XEN) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x00] disabled) (XEN) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x00] disabled) (XEN) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) (XEN) ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) (XEN) ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) (XEN) ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1]) (XEN) ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) (XEN) IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23 (XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) (XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) (XEN) ACPI: IRQ0 used by override. (XEN) ACPI: IRQ2 used by override. (XEN) ACPI: IRQ9 used by override. (XEN) Enabling APIC mode: Flat. Using 1 I/O APICs (XEN) ACPI: HPET id: 0x8086a201 base: 0xfed00000 (XEN) [VT-D]dmar.c:631: Host address width 36 (XEN) [VT-D]dmar.c:640: found ACPI_DMAR_DRHD: (XEN) [VT-D]dmar.c:374: dmaru->address = fed90000 (XEN) [VT-D]dmar.c:326: endpoint: 0:1b.0 (XEN) [VT-D]dmar.c:640: found ACPI_DMAR_DRHD: (XEN) [VT-D]dmar.c:374: dmaru->address = fed91000 (XEN) [VT-D]dmar.c:326: endpoint: 0:2.0 (XEN) [VT-D]dmar.c:640: found ACPI_DMAR_DRHD: (XEN) [VT-D]dmar.c:374: dmaru->address = fed92000 (XEN) [VT-D]dmar.c:326: endpoint: 0:3.0 (XEN) [VT-D]dmar.c:326: endpoint: 0:3.2 (XEN) [VT-D]dmar.c:326: endpoint: 0:3.3 (XEN) [VT-D]dmar.c:640: found ACPI_DMAR_DRHD: (XEN) [VT-D]dmar.c:374: dmaru->address = fed93000 (XEN) [VT-D]dmar.c:386: flags: INCLUDE_ALL (XEN) [VT-D]dmar.c:644: found ACPI_DMAR_RMRR: (XEN) [VT-D]dmar.c:326: endpoint: 0:2.0 (XEN) [VT-D]dmar.c:535: RMRR region: base_addr df600000 end_address dfffffff (XEN) [VT-D]dmar.c:644: found ACPI_DMAR_RMRR: (XEN) [VT-D]dmar.c:326: endpoint: 0:1d.7 (XEN) [VT-D]dmar.c:535: RMRR region: base_addr defd0000 end_address defd0fff (XEN) [VT-D]dmar.c:644: found ACPI_DMAR_RMRR: (XEN) [VT-D]dmar.c:326: endpoint: 0:1a.7 (XEN) [VT-D]dmar.c:535: RMRR region: base_addr defd1000 end_address defd1fff (XEN) [VT-D]dmar.c:644: found ACPI_DMAR_RMRR: (XEN) [VT-D]dmar.c:326: endpoint: 0:1d.0 (XEN) [VT-D]dmar.c:535: RMRR region: base_addr defd2000 end_address defd2fff (XEN) [VT-D]dmar.c:644: found ACPI_DMAR_RMRR: (XEN) [VT-D]dmar.c:326: endpoint: 0:1d.1 (XEN) [VT-D]dmar.c:535: RMRR region: base_addr defd3000 end_address defd3fff (XEN) [VT-D]dmar.c:644: found ACPI_DMAR_RMRR: (XEN) [VT-D]dmar.c:326: endpoint: 0:1d.2 (XEN) [VT-D]dmar.c:535: RMRR region: base_addr defd4000 end_address defd4fff (XEN) [VT-D]dmar.c:644: found ACPI_DMAR_RMRR: (XEN) [VT-D]dmar.c:326: endpoint: 0:1a.0 (XEN) [VT-D]dmar.c:535: RMRR region: base_addr defd5000 end_address defd5fff (XEN) [VT-D]dmar.c:644: found ACPI_DMAR_RMRR: (XEN) [VT-D]dmar.c:326: endpoint: 0:1a.1 (XEN) [VT-D]dmar.c:535: RMRR region: base_addr defd6000 end_address defd6fff (XEN) PCI: MCFG configuration 0: base f4000000 segment 0 buses 0 - 63 (XEN) PCI: MCFG area at f4000000 reserved in E820 (XEN) Using ACPI (MADT) for SMP configuration information (XEN) Using scheduler: SMP Credit Scheduler (credit) (XEN) Initializing CPU#0 (XEN) Detected 2826.322 MHz processor. (XEN) Initing memory sharing. (XEN) CPU: L1 I cache: 32K, L1 D cache: 32K (XEN) CPU: L2 cache: 6144K (XEN) CPU: Physical Processor ID: 0 (XEN) CPU: Processor Core ID: 0 (XEN) VMX: Supported advanced features: (XEN) - APIC MMIO access virtualisation (XEN) - APIC TPR shadow (XEN) - Virtual NMI (XEN) - MSR direct-access bitmap (XEN) HVM: ASIDs disabled. (XEN) HVM: VMX enabled (XEN) Intel machine check reporting enabled on CPU#0. (XEN) CPU0: Thermal monitoring enabled (TM2) (XEN) CMCI: CPU0 has no CMCI support (XEN) [VT-D]iommu.c:1062: drhd->address = fed92000 (XEN) [VT-D]iommu.c:1063: iommu->reg = ffff82c3fff57000 (XEN) [VT-D]iommu.c:1062: drhd->address = fed91000 (XEN) [VT-D]iommu.c:1063: iommu->reg = ffff82c3fff56000 (XEN) [VT-D]iommu.c:1062: drhd->address = fed90000 (XEN) [VT-D]iommu.c:1063: iommu->reg = ffff82c3fff55000 (XEN) [VT-D]iommu.c:1062: drhd->address = fed93000 (XEN) [VT-D]iommu.c:1063: iommu->reg = ffff82c3fff54000 (XEN) Intel VT-d Snoop Control not supported. (XEN) Intel VT-d DMA Passthrough not supported. (XEN) Intel VT-d Queued Invalidation not supported. (XEN) Intel VT-d Interrupt Remapping not supported. (XEN) I/O virtualisation enabled (XEN) I/O virtualisation for PV guests disabled (XEN) CPU0: Intel(R) Core(TM)2 Duo CPU E8300 @ 2.83GHz stepping 06 (XEN) Booting processor 1/1 eip 8c000 (XEN) Initializing CPU#1 (XEN) CPU: L1 I cache: 32K, L1 D cache: 32K (XEN) CPU: L2 cache: 6144K (XEN) CPU: Physical Processor ID: 0 (XEN) CPU: Processor Core ID: 1 (XEN) HVM: ASIDs disabled. (XEN) Intel machine check reporting enabled on CPU#1. (XEN) CPU1: Thermal monitoring enabled (TM2) (XEN) CMCI: CPU1 has no CMCI support (XEN) CPU1: Intel(R) Core(TM)2 Duo CPU E8300 @ 2.83GHz stepping 06 (XEN) Total of 2 processors activated. (XEN) ENABLING IO-APIC IRQs (XEN) -> Using new ACK method (XEN) ..TIMER: vector=0xF0 apic1=0 pin1=2 apic2=-1 pin2=-1 (XEN) checking TSC synchronization across 2 CPUs: passed. (XEN) Platform timer is 14.318MHz HPET (XEN) Brought up 2 CPUs (XEN) microcode.c:73:d32767 microcode: CPU1 resumed (XEN) HPET: 4 timers in total, 0 timers will be used for broadcast (XEN) ACPI sleep modes: S3 (XEN) mcheck_poll: Machine check polling timer started. (XEN) [VT-D]iommu.c:1306:d32767 domain_context_mapping:PCI: bdf = 0:0.0 (XEN) [VT-D]mmconfig-shared.c:460: next cap:0:0.0: no extended config (XEN) [VT-D]iommu.c:1306:d32767 domain_context_mapping:PCI: bdf = 0:2.0 (XEN) [VT-D]mmconfig-shared.c:460: next cap:0:2.0: no extended config (XEN) [VT-D]iommu.c:1306:d32767 domain_context_mapping:PCI: bdf = 0:3.0 (XEN) [VT-D]mmconfig-shared.c:460: next cap:0:3.0: no extended config (XEN) [VT-D]iommu.c:1306:d32767 domain_context_mapping:PCI: bdf = 0:3.2 (XEN) [VT-D]mmconfig-shared.c:460: next cap:0:3.2: no extended config (XEN) [VT-D]iommu.c:1306:d32767 domain_context_mapping:PCI: bdf = 0:3.3 (XEN) [VT-D]mmconfig-shared.c:460: next cap:0:3.3: no extended config (XEN) [VT-D]iommu.c:1306:d32767 domain_context_mapping:PCI: bdf = 0:19.0 (XEN) [VT-D]mmconfig-shared.c:460: next cap:0:19.0: no extended config (XEN) [VT-D]iommu.c:1306:d32767 domain_context_mapping:PCI: bdf = 0:1a.0 (XEN) [VT-D]mmconfig-shared.c:460: next cap:0:1a.0: no extended config (XEN) [VT-D]iommu.c:1306:d32767 domain_context_mapping:PCI: bdf = 0:1a.1 (XEN) [VT-D]mmconfig-shared.c:460: next cap:0:1a.1: no extended config (XEN) [VT-D]iommu.c:1306:d32767 domain_context_mapping:PCI: bdf = 0:1a.7 (XEN) [VT-D]mmconfig-shared.c:460: next cap:0:1a.7: no extended config (XEN) [VT-D]iommu.c:1299:d32767 domain_context_mapping:PCIe: bdf = 0:1b.0 (XEN) [VT-D]iommu.c:1306:d32767 domain_context_mapping:PCI: bdf = 0:1d.0 (XEN) [VT-D]mmconfig-shared.c:460: next cap:0:1d.0: no extended config (XEN) [VT-D]iommu.c:1306:d32767 domain_context_mapping:PCI: bdf = 0:1d.1 (XEN) [VT-D]mmconfig-shared.c:460: next cap:0:1d.1: no extended config (XEN) [VT-D]iommu.c:1306:d32767 domain_context_mapping:PCI: bdf = 0:1d.2 (XEN) [VT-D]mmconfig-shared.c:460: next cap:0:1d.2: no extended config (XEN) [VT-D]iommu.c:1306:d32767 domain_context_mapping:PCI: bdf = 0:1d.7 (XEN) [VT-D]mmconfig-shared.c:460: next cap:0:1d.7: no extended config (XEN) [VT-D]mmconfig-shared.c:460: next cap:0:1e.0: no extended config (XEN) [VT-D]iommu.c:1306:d32767 domain_context_mapping:PCI: bdf = 0:1f.0 (XEN) [VT-D]mmconfig-shared.c:460: next cap:0:1f.0: no extended config (XEN) [VT-D]iommu.c:1306:d32767 domain_context_mapping:PCI: bdf = 0:1f.2 (XEN) [VT-D]iommu.c:1306:d32767 domain_context_mapping:PCI: bdf = 0:1f.5 (XEN) [VT-D]iommu.c:1299:d32767 domain_context_mapping:PCIe: bdf = 1:0.0 (XEN) [VT-D]iommu.c:1299:d32767 domain_context_mapping:PCIe: bdf = 1:0.1 (XEN) [VT-D]iommu.c:1306:d32767 domain_context_mapping:PCI: bdf = 7:4.0 (XEN) [VT-D]mmconfig-shared.c:460: next cap:7:4.0: no extended config (XEN) [VT-D]iommu.c:1306:d32767 domain_context_mapping:PCI: bdf = 7:b.0 (XEN) [VT-D]mmconfig-shared.c:460: next cap:7:b.0: no extended config (XEN) [VT-D]iommu.c:1299:d32767 domain_context_mapping:PCIe: bdf = 30:0.0 (XEN) [VT-D]iommu.c:684: iommu_enable_translation: iommu->reg = ffff82c3fff57000 (XEN) [VT-D]iommu.c:684: iommu_enable_translation: iommu->reg = ffff82c3fff56000 (XEN) [VT-D]iommu.c:684: iommu_enable_translation: iommu->reg = ffff82c3fff55000 (XEN) [VT-D]iommu.c:684: iommu_enable_translation: iommu->reg = ffff82c3fff54000 (XEN) *** LOADING DOMAIN 0 *** (XEN) elf_parse_binary: phdr: paddr=0xffffffff80200000 memsz=0x2b89b0 (XEN) elf_parse_binary: phdr: paddr=0xffffffff804b9000 memsz=0x79248 (XEN) elf_parse_binary: phdr: paddr=0xffffffff80533000 memsz=0xc0d (XEN) elf_parse_binary: phdr: paddr=0xffffffff80534000 memsz=0xbf398 (XEN) elf_parse_binary: memory: 0xffffffff80200000 -> 0xffffffff805f3398 (XEN) elf_xen_parse_note: GUEST_OS = "linux" (XEN) elf_xen_parse_note: GUEST_VERSION = "2.6" (XEN) elf_xen_parse_note: XEN_VERSION = "xen-3.0" (XEN) elf_xen_parse_note: VIRT_BASE = 0xffffffff80000000 (XEN) elf_xen_parse_note: PADDR_OFFSET = 0xffffffff80000000 (XEN) elf_xen_parse_note: ENTRY = 0xffffffff80200000 (XEN) elf_xen_parse_note: HYPERCALL_PAGE = 0xffffffff80205000 (XEN) elf_xen_parse_note: unknown xen elf note (0xd) (XEN) elf_xen_parse_note: FEATURES = "writable_page_tables|writable_descriptor_tables|auto_translated_physmap|pae_pgdir_above_4gb|supervisor_mode_kernel" (XEN) elf_xen_parse_note: LOADER = "generic" (XEN) elf_xen_parse_note: SUSPEND_CANCEL = 0x1 (XEN) elf_xen_addr_calc_check: addresses: (XEN) virt_base = 0xffffffff80000000 (XEN) elf_paddr_offset = 0xffffffff80000000 (XEN) virt_offset = 0x0 (XEN) virt_kstart = 0xffffffff80200000 (XEN) virt_kend = 0xffffffff805f3398 (XEN) virt_entry = 0xffffffff80200000 (XEN) p2m_base = 0xffffffffffffffff (XEN) Xen kernel: 64-bit, lsb, compat32 (XEN) Dom0 kernel: 64-bit, lsb, paddr 0xffffffff80200000 -> 0xffffffff805f3398 (XEN) PHYSICAL MEMORY ARRANGEMENT: (XEN) Dom0 alloc.: 0000000117000000->0000000118000000 (258048 pages to be allocated) (XEN) VIRTUAL MEMORY ARRANGEMENT: (XEN) Loaded kernel: ffffffff80200000->ffffffff805f3398 (XEN) Init. ramdisk: ffffffff805f4000->ffffffff80d55000 (XEN) Phys-Mach map: ffffffff80d55000->ffffffff80f55000 (XEN) Start info: ffffffff80f55000->ffffffff80f554b4 (XEN) Page tables: ffffffff80f56000->ffffffff80f61000 (XEN) Boot stack: ffffffff80f61000->ffffffff80f62000 (XEN) TOTAL: ffffffff80000000->ffffffff81000000 (XEN) ENTRY ADDRESS: ffffffff80200000 (XEN) Dom0 has maximum 2 VCPUs (XEN) elf_load_binary: phdr 0 at 0xffffffff80200000 -> 0xffffffff804b89b0 (XEN) elf_load_binary: phdr 1 at 0xffffffff804b9000 -> 0xffffffff80532248 (XEN) elf_load_binary: phdr 2 at 0xffffffff80533000 -> 0xffffffff80533c0d (XEN) elf_load_binary: phdr 3 at 0xffffffff80534000 -> 0xffffffff8056bf68 (XEN) Scrubbing Free RAM: .............................done. (XEN) Xen trace buffers: disabled (XEN) tmem: initialized comp=0 global-lock=0 (XEN) Std. Loglevel: All (XEN) Guest Loglevel: All (XEN) ********************************************** (XEN) ******* WARNING: CONSOLE OUTPUT IS SYNCHRONOUS (XEN) ******* This option is intended to aid debugging of Xen by ensuring (XEN) ******* that all output is synchronously delivered on the serial line. (XEN) ******* However it can introduce SIGNIFICANT latencies and affect (XEN) ******* timekeeping. It is NOT recommended for production use! (XEN) ********************************************** (XEN) 3... 2... 1... (XEN) *** Serial input -> DOM0 (type 'CTRL-a' three times to switch input to Xen) (XEN) Freed 156kB init memory. kernel direct mapping tables up to 40800000 @ f62000-1169000 Bootdata ok (command line is root=/dev/mapper/sam-root_x86_64 console=ttyS0 loglevel=8 ro acpi_dbg_layer=0xffff0000 acpi_dbg_level=0xffffffff) Linux version 2.6.18.8 (horms@sam) (gcc version 4.3.2 (Debian 4.3.2-1.1) ) #12 SMP Mon Feb 15 14:59:12 JST 2010 BIOS-provided physical RAM map: Xen: 0000000000000000 - 0000000040800000 (usable) DMI 2.5 present. On node 0 totalpages: 260580 DMA zone: 4040 pages, LIFO batch:0 DMA32 zone: 256540 pages, LIFO batch:31 ACPI: RSDP (v000 COMPAQ ) @ 0x00000000000e5c10 ACPI: RSDT (v001 HPQOEM SLIC-BPC 0x20090226 0x00000000) @ 0x00000000defc1e40 ACPI: FADT (v001 COMPAQ BEARLAKE 0x00000001 0x00000000) @ 0x00000000defc1ee8 ACPI: MADT (v001 COMPAQ BEARLAKE 0x00000001 0x00000000) @ 0x00000000defc1f5c ACPI: ASF! (v032 COMPAQ BEARLAKE 0x00000001 0x00000000) @ 0x00000000defc1fe0 ACPI: MCFG (v001 COMPAQ BEARLAKE 0x00000001 0x00000000) @ 0x00000000defc2043 ACPI: TCPA (v001 COMPAQ BEARLAKE 0x00000001 0x00000000) @ 0x00000000defc207f ACPI: SLIC (v001 HPQOEM SLIC-BPC 0x00000001 0x00000000) @ 0x00000000defc20b1 ACPI: HPET (v001 COMPAQ BEARLAKE 0x00000001 0x00000000) @ 0x00000000defc2227 ACPI: (v001 COMPAQ BEARLAKE 0x00000001 0x00000000) @ 0x00000000defc225f >>> ERROR: Invalid checksum ACPI: DSDT (v001 COMPAQ DSDT_PRJ 0x00000001 MSFT 0x0100000e) @ 0x0000000000000000 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x00] disabled) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x00] disabled) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1]) ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Setting APIC routing to xen Using ACPI (MADT) for SMP configuration information Allocating PCI resources starting at e2000000 (gap: e0000000:14000000) Built 1 zonelists. Total pages: 260580 Kernel command line: root=/dev/mapper/sam-root_x86_64 console=ttyS0 loglevel=8 ro acpi_dbg_layer=0xffff0000 acpi_dbg_level=0xffffffff Initializing CPU#0 PID hash table entries: 4096 (order: 12, 32768 bytes) Xen reported: 2826.322 MHz processor. Console: colour VGA+ 80x25 Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes) Inode-cache hash table entries: 65536 (order: 7, 524288 bytes) Software IO TLB enabled: Aperture: 64 megabytes Kernel range: ffff88000233a000 - ffff88000633a000 Address size: 27 bits PCI-DMA: Using software bounce buffering for IO (SWIOTLB) Memory: 950264k/1056768k available (2370k kernel code, 98156k reserved, 828k data, 172k init) Calibrating delay using timer specific routine.. 5667.92 BogoMIPS (lpj=28339637) Mount-cache hash table entries: 256 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 6144K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 SMP alternatives: switching to UP code ACPI: Core revision 20060707 (XEN) io_apic.c:2291: (XEN) ioapic_guest_write: apic=0, pin=2, irq=0 (XEN) ioapic_guest_write: new_entry=00000900 (XEN) ioapic_guest_write: Attempt to modify IO-APIC pin for in-use IRQ! SMP alternatives: switching to SMP code Brought up 2 CPUs Initializing CPU#1 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 6144K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 migration_cost=11 checking if image is initramfs... it is Freeing initrd memory: 7556k freed NET: Registered protocol family 16 ACPI: bus type pci registered mcfg_ioremap: end_bus_number=63 PCI: Using MMCONFIG at f4000000 - f7ffffff Initializing Region \BIOS Initializing Region \VECT Executing Method \_SB_.PCI0.LPC_._REG Executing Method \_SB_.PCI0.LPC_._REG Executing Method \_SB_.PCI0.LPC_._REG Executing Method \_SB_.PCI0.LPC_._REG Executing Method \_SB_.PCI0.LPC_._REG Initializing Region \_SB_.PCI0.MCHC Initializing Region \_SB_.PCI0.LPC_.PIRQ Initializing Region \_SB_.PCI0.LPC_.GPM1 Initializing Region \_SB_.PCI0.LPC_.L47B Initializing Region \_SB_.PCI0.LPC_.LPCC Initializing Region \_SB_.PCI0.LPC_.DCOD Initializing Region \_SB_.PCI0.PEG1.SLST Initializing Region \_SB_.PCI0.PEG1.RSTS Initializing Region \_SB_.PCI0.PEG1.PGLC Initializing Region \_SB_.PCI0.PEG2.SLST Initializing Region \_SB_.PCI0.PEG2.RSTS Initializing Region \_SB_.PCI0.PEG2.PGLC Initializing Region \_SB_.PCI0.IGBE.INCP Initializing Region \_SB_.PCI0.PCX1.SLST Initializing Region \_SB_.PCI0.PCX1.RSTS Initializing Region \_SB_.PCI0.PCX1.MPCR Initializing Region \_SB_.PCI0.PCX1.SSCS Initializing Region \_SB_.PCI0.PCX2.SLST Initializing Region \_SB_.PCI0.PCX2.RSTS Initializing Region \_SB_.PCI0.PCX2.MPCR Initializing Region \_SB_.PCI0.PCX2.SSCS Initializing Region \_SB_.PCI0.PCX5.SLST Initializing Region \_SB_.PCI0.PCX5.RSTS Initializing Region \_SB_.PCI0.PCX5.MPCR Initializing Region \_SB_.PCI0.PCX5.SSCS Initializing Region \_SB_.PCI0.PCX6.SLST Initializing Region \_SB_.PCI0.PCX6.RSTS Initializing Region \_SB_.PCI0.PCX6.MPCR Initializing Region \_SB_.PCI0.PCX6.SSCS Initializing Region \_SB_.PCI0.SATA.SATP Initializing Region \_SB_.PCI0.GFX0.VGAC Initializing Region \_SB_.PCI0.IEIT.EITO Initializing Region \SSCR Initializing Region \SSSR Initializing Region \SIPM Initializing Region \MBFD Initializing Region \RCPX Initializing Region \TCOB Initializing Region \DVMT Initializing Region \ECOB Executing Method \_SB_._STA Executing Method \_SB_._INI Executing Method \_SB_.PCI0._STA Executing Method \_SB_.PCI0._INI ACPI: Interpreter enabled ACPI: Using IOAPIC for interrupt routing **** Context Switch from TID 0 to TID 3FC3F510 **** acpi_bus-0120 [FFFF88003FC3F510] [00] bus_get_status : Device [CPU0] status [0000000f] acpi_bus-0120 [FFFF88003FC3F510] [00] bus_get_status : Device [CPU1] status [0000000f] acpi_bus-0120 [FFFF88003FC3F510] [00] bus_get_status : Device [CPU2] status [0000000f] acpi_bus-0120 [FFFF88003FC3F510] [00] bus_get_status : Device [CPU3] status [0000000f] acpi_bus-0120 [FFFF88003FC3F510] [00] bus_get_status : Device [_SB] status [0000000f] acpi_bus-0120 [FFFF88003FC3F510] [00] bus_get_status : Device [PCI0] status [0000000f] acpi_utils-0274 [FFFF88003FC3F510] [00] evaluate_integer : Evaluate [\_SB_.PCI0._SEG]: AE_NOT_FOUND pci_root-0226 [FFFF88003FC3F510] [00] pci_root_add : Assuming segment 0 (no _SEG) acpi_utils-0274 [FFFF88003FC3F510] [00] evaluate_integer : Evaluate [\_SB_.PCI0._BBN]: AE_NOT_FOUND pci_root-0247 [FFFF88003FC3F510] [00] pci_root_add : Assuming bus 0 (no _BBN) ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Probing PCI hardware (bus 00) acpi_utils-0274 [FFFF88003FC3F510] [02] evaluate_integer : Evaluate [\_SB_.PCI0._SEG]: AE_NOT_FOUND acpi_utils-0274 [FFFF88003FC3F510] [02] evaluate_integer : Evaluate [\_SB_.PCI0._BBN]: AE_NOT_FOUND ACPI: Assume root bridge [\_SB_.PCI0] bus is 0 acpi_utils-0274 [FFFF88003FC3F510] [19] evaluate_integer : Evaluate [\_SB_._ADR]: AE_NOT_FOUND acpi_utils-0288 [FFFF88003FC3F510] [19] evaluate_integer : Return value [0] acpi_utils-0288 [FFFF88003FC3F510] [19] evaluate_integer : Return value [2031616] Boot video device is 0000:00:02.0 PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.2 pci 0000:01:00.0: use Flash Memory Space for SR-IOV BARs pci 0000:01:00.1: use Flash Memory Space for SR-IOV BARs PCI: Firmware left 0000:07:0b.0 e100 interrupts enabled, disabling PCI: Transparent bridge - 0000:00:1e.0 pci_bind-0363 [FFFF88003FC3F510] [00] pci_bind_root : Binding PCI root bridge [\_SB_.PCI0] to 00:00 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] 00:00:1F[B] -> [18] 00:00:1F[C] -> [18] 00:00:1D[A] -> [20] 00:00:1D[B] -> [21] 00:00:1D[C] -> [22] 00:00:1C[A] -> [20] 00:00:1C[B] -> [21] 00:00:1C[C] -> [22] 00:00:1C[D] -> [23] 00:00:1B[A] -> [21] 00:00:1A[A] -> [20] 00:00:1A[B] -> [21] 00:00:1A[C] -> [22] 00:00:19[B] -> [19] 00:00:03[A] -> [16] 00:00:03[B] -> [17] 00:00:03[C] -> [18] 00:00:02[A] -> [16] 00:00:02[B] -> [17] 00:00:01[A] -> [16] 00:00:06[A] -> [16] scan-0543 [FFFF88003FC3F510] [00] bus_driver_init : Driver successfully bound to device acpi_bus-0120 [FFFF88003FC3F510] [00] bus_get_status : Device [LPC] status [0000000f] pci_bind-0141 [FFFF88003FC3F510] [00] pci_bind : Binding PCI device [\_SB_.PCI0.LPC_]... pci_bind-0171 [FFFF88003FC3F510] [00] pci_bind : ...to 00:00:1f.00 acpi_bus-0120 [FFFF88003FC3F510] [00] bus_get_status : Device [NCP] status [0000000f] acpi_bus-0120 [FFFF88003FC3F510] [00] bus_get_status : Device [PIC] status [0000000f] acpi_bus-0120 [FFFF88003FC3F510] [00] bus_get_status : Device [TIME] status [0000000f] acpi_bus-0120 [FFFF88003FC3F510] [00] bus_get_status : Device [IDMA] status [0000000f] acpi_bus-0120 [FFFF88003FC3F510] [00] bus_get_status : Device [RTC] status [0000000f] acpi_bus-0120 [FFFF88003FC3F510] [00] bus_get_status : Device [SPKR] status [0000000f] acpi_bus-0120 [FFFF88003FC3F510] [00] bus_get_status : Device [PS2M] status [0000000f] acpi_bus-0120 [FFFF88003FC3F510] [00] bus_get_status : Device [KBD] status [0000000f] acpi_utils-0288 [FFFF88003FC3F510] [00] evaluate_integer : Return value [15] acpi_bus-0120 [FFFF88003FC3F510] [00] bus_get_status : Device [ECP0] status [0000000f] acpi_utils-0288 [FFFF88003FC3F510] [00] evaluate_integer : Return value [0] acpi_bus-0120 [FFFF88003FC3F510] [00] bus_get_status : Device [LPT0] status [00000000] acpi_utils-0288 [FFFF88003FC3F510] [00] evaluate_integer : Return value [15] acpi_bus-0120 [FFFF88003FC3F510] [00] bus_get_status : Device [COM1] status [0000000f] acpi_utils-0288 [FFFF88003FC3F510] [00] evaluate_integer : Return value [0] acpi_bus-0120 [FFFF88003FC3F510] [00] bus_get_status : Device [COM2] status [00000000] acpi_utils-0288 [FFFF88003FC3F510] [00] evaluate_integer : Return value [15] acpi_bus-0120 [FFFF88003FC3F510] [00] bus_get_status : Device [FDC0] status [0000000f] acpi_utils-0288 [FFFF88003FC3F510] [00] evaluate_integer : Return value [15] acpi_bus-0120 [FFFF88003FC3F510] [00] bus_get_status : Device [APIC] status [0000000f] acpi_bus-0120 [FFFF88003FC3F510] [00] bus_get_status : Device [TPM] status [0000000f] acpi_utils-0288 [FFFF88003FC3F510] [00] evaluate_integer : Return value [15] acpi_bus-0120 [FFFF88003FC3F510] [00] bus_get_status : Device [HPET] status [0000000f] acpi_utils-0288 [FFFF88003FC3F510] [00] evaluate_integer : Return value [11] acpi_bus-0120 [FFFF88003FC3F510] [00] bus_get_status : Device [LNKA] status [0000000b] pci_link-0186 [FFFF88003FC3F510] [00] pci_link_get_possible : Found 9 possible IRQs pci_link-0290 [FFFF88003FC3F510] [00] pci_link_get_current : Link at IRQ 11 ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 14 15) scan-0543 [FFFF88003FC3F510] [00] bus_driver_init : Driver successfully bound to device acpi_utils-0288 [FFFF88003FC3F510] [00] evaluate_integer : Return value [11] acpi_bus-0120 [FFFF88003FC3F510] [00] bus_get_status : Device [LNKB] status [0000000b] pci_link-0186 [FFFF88003FC3F510] [00] pci_link_get_possible : Found 9 possible IRQs pci_link-0290 [FFFF88003FC3F510] [00] pci_link_get_current : Link at IRQ 5 ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 11 14 15) scan-0543 [FFFF88003FC3F510] [00] bus_driver_init : Driver successfully bound to device acpi_utils-0288 [FFFF88003FC3F510] [00] evaluate_integer : Return value [11] acpi_bus-0120 [FFFF88003FC3F510] [00] bus_get_status : Device [LNKC] status [0000000b] pci_link-0186 [FFFF88003FC3F510] [00] pci_link_get_possible : Found 9 possible IRQs pci_link-0290 [FFFF88003FC3F510] [00] pci_link_get_current : Link at IRQ 10 ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *10 11 14 15) scan-0543 [FFFF88003FC3F510] [00] bus_driver_init : Driver successfully bound to device acpi_utils-0288 [FFFF88003FC3F510] [00] evaluate_integer : Return value [11] acpi_bus-0120 [FFFF88003FC3F510] [00] bus_get_status : Device [LNKD] status [0000000b] pci_link-0186 [FFFF88003FC3F510] [00] pci_link_get_possible : Found 9 possible IRQs pci_link-0290 [FFFF88003FC3F510] [00] pci_link_get_current : Link at IRQ 5 ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 14 15) scan-0543 [FFFF88003FC3F510] [00] bus_driver_init : Driver successfully bound to device acpi_utils-0288 [FFFF88003FC3F510] [00] evaluate_integer : Return value [11] acpi_bus-0120 [FFFF88003FC3F510] [00] bus_get_status : Device [LNKE] status [0000000b] pci_link-0186 [FFFF88003FC3F510] [00] pci_link_get_possible : Found 9 possible IRQs pci_link-0290 [FFFF88003FC3F510] [00] pci_link_get_current : Link at IRQ 10 ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 *10 11 14 15) scan-0543 [FFFF88003FC3F510] [00] bus_driver_init : Driver successfully bound to device acpi_utils-0288 [FFFF88003FC3F510] [00] evaluate_integer : Return value [11] acpi_bus-0120 [FFFF88003FC3F510] [00] bus_get_status : Device [LNKF] status [0000000b] pci_link-0186 [FFFF88003FC3F510] [00] pci_link_get_possible : Found 9 possible IRQs pci_link-0290 [FFFF88003FC3F510] [00] pci_link_get_current : Link at IRQ 10 ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *10 11 14 15) scan-0543 [FFFF88003FC3F510] [00] bus_driver_init : Driver successfully bound to device acpi_utils-0288 [FFFF88003FC3F510] [00] evaluate_integer : Return value [11] acpi_bus-0120 [FFFF88003FC3F510] [00] bus_get_status : Device [LNKG] status [0000000b] pci_link-0186 [FFFF88003FC3F510] [00] pci_link_get_possible : Found 9 possible IRQs pci_link-0290 [FFFF88003FC3F510] [00] pci_link_get_current : Link at IRQ 10 ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *10 11 14 15) scan-0543 [FFFF88003FC3F510] [00] bus_driver_init : Driver successfully bound to device acpi_utils-0288 [FFFF88003FC3F510] [00] evaluate_integer : Return value [9] acpi_bus-0120 [FFFF88003FC3F510] [00] bus_get_status : Device [LNKH] status [00000009] pci_link-0186 [FFFF88003FC3F510] [00] pci_link_get_possible : Found 9 possible IRQs pci_link-0290 [FFFF88003FC3F510] [00] pci_link_get_current : Link at IRQ 0 ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled. scan-0543 [FFFF88003FC3F510] [00] bus_driver_init : Driver successfully bound to device acpi_bus-0120 [FFFF88003FC3F510] [00] bus_get_status : Device [PEG1] status [0000000f] pci_bind-0141 [FFFF88003FC3F510] [00] pci_bind : Binding PCI device [\_SB_.PCI0.PEG1]... pci_bind-0171 [FFFF88003FC3F510] [00] pci_bind : ...to 00:00:01.00 pci_bind-0224 [FFFF88003FC3F510] [00] pci_bind : Device 00:00:01.00 is a PCI bridge ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEG1._PRT] 00:01:00[A] -> [16] 00:01:00[B] -> [17] 00:01:00[C] -> [18] 00:01:00[D] -> [19] acpi_bus-0120 [FFFF88003FC3F510] [00] bus_get_status : Device [SLT1] status [0000000f] pci_bind-0141 [FFFF88003FC3F510] [00] pci_bind : Binding PCI device [\_SB_.PCI0.PEG1.SLT1]... pci_bind-0171 [FFFF88003FC3F510] [00] pci_bind : ...to 00:01:00.00 acpi_bus-0120 [FFFF88003FC3F510] [00] bus_get_status : Device [PEG2] status [0000000f] pci_bind-0141 [FFFF88003FC3F510] [00] pci_bind : Binding PCI device [\_SB_.PCI0.PEG2]... pci_bind-0171 [FFFF88003FC3F510] [00] pci_bind : ...to 00:00:06.00 pci_bind-0201 [FFFF88003FC3F510] [00] pci_bind : Device 00:00:06.00 not present in PCI namespace acpi_bus-0120 [FFFF88003FC3F510] [00] bus_get_status : Device [SLT1] status [0000000f] acpi_bus-0120 [FFFF88003FC3F510] [00] bus_get_status : Device [IGBE] status [0000000f] pci_bind-0141 [FFFF88003FC3F510] [00] pci_bind : Binding PCI device [\_SB_.PCI0.IGBE]... pci_bind-0171 [FFFF88003FC3F510] [00] pci_bind : ...to 00:00:19.00 acpi_bus-0120 [FFFF88003FC3F510] [00] bus_get_status : Device [PCX1] status [0000000f] pci_bind-0141 [FFFF88003FC3F510] [00] pci_bind : Binding PCI device [\_SB_.PCI0.PCX1]... pci_bind-0171 [FFFF88003FC3F510] [00] pci_bind : ...to 00:00:1c.00 pci_bind-0224 [FFFF88003FC3F510] [00] pci_bind : Device 00:00:1c.00 is a PCI bridge ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCX1._PRT] 00:20:00[A] -> [16] 00:20:00[B] -> [17] 00:20:00[C] -> [18] 00:20:00[D] -> [19] acpi_bus-0120 [FFFF88003FC3F510] [00] bus_get_status : Device [SLT1] status [0000000f] pci_bind-0141 [FFFF88003FC3F510] [00] pci_bind : Binding PCI device [\_SB_.PCI0.PCX1.SLT1]... pci_bind-0171 [FFFF88003FC3F510] [00] pci_bind : ...to 00:20:00.00 pci_bind-0201 [FFFF88003FC3F510] [00] pci_bind : Device 00:20:00.00 not present in PCI namespace acpi_bus-0120 [FFFF88003FC3F510] [00] bus_get_status : Device [PCX2] status [0000000f] pci_bind-0141 [FFFF88003FC3F510] [00] pci_bind : Binding PCI device [\_SB_.PCI0.PCX2]... pci_bind-0171 [FFFF88003FC3F510] [00] pci_bind : ...to 00:00:1c.01 pci_bind-0224 [FFFF88003FC3F510] [00] pci_bind : Device 00:00:1c.01 is a PCI bridge ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCX2._PRT] 00:30:00[A] -> [17] 00:30:00[B] -> [18] 00:30:00[C] -> [19] 00:30:00[D] -> [16] acpi_bus-0120 [FFFF88003FC3F510] [00] bus_get_status : Device [SLT2] status [0000000f] pci_bind-0141 [FFFF88003FC3F510] [00] pci_bind : Binding PCI device [\_SB_.PCI0.PCX2.SLT2]... pci_bind-0171 [FFFF88003FC3F510] [00] pci_bind : ...to 00:30:00.00 acpi_bus-0120 [FFFF88003FC3F510] [00] bus_get_status : Device [PCX5] status [0000000f] pci_bind-0141 [FFFF88003FC3F510] [00] pci_bind : Binding PCI device [\_SB_.PCI0.PCX5]... pci_bind-0171 [FFFF88003FC3F510] [00] pci_bind : ...to 00:00:1c.04 pci_bind-0201 [FFFF88003FC3F510] [00] pci_bind : Device 00:00:1c.04 not present in PCI namespace acpi_bus-0120 [FFFF88003FC3F510] [00] bus_get_status : Device [SLT5] status [0000000f] acpi_bus-0120 [FFFF88003FC3F510] [00] bus_get_status : Device [PCX6] status [0000000f] pci_bind-0141 [FFFF88003FC3F510] [00] pci_bind : Binding PCI device [\_SB_.PCI0.PCX6]... pci_bind-0171 [FFFF88003FC3F510] [00] pci_bind : ...to 00:00:1c.05 pci_bind-0201 [FFFF88003FC3F510] [00] pci_bind : Device 00:00:1c.05 not present in PCI namespace acpi_bus-0120 [FFFF88003FC3F510] [00] bus_get_status : Device [SLT6] status [0000000f] acpi_bus-0120 [FFFF88003FC3F510] [00] bus_get_status : Device [HUB] status [0000000f] pci_bind-0141 [FFFF88003FC3F510] [00] pci_bind : Binding PCI device [\_SB_.PCI0.HUB_]... pci_bind-0171 [FFFF88003FC3F510] [00] pci_bind : ...to 00:00:1e.00 pci_bind-0224 [FFFF88003FC3F510] [00] pci_bind : Device 00:00:1e.00 is a PCI bridge ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB_._PRT] 00:07:04[A] -> [20] 00:07:04[B] -> [21] 00:07:04[C] -> [22] 00:07:04[D] -> [23] 00:07:09[A] -> [21] 00:07:09[B] -> [22] 00:07:09[C] -> [23] 00:07:09[D] -> [20] 00:07:0B[A] -> [22] 00:07:0B[B] -> [23] 00:07:0B[C] -> [20] 00:07:0B[D] -> [21] acpi_bus-0120 [FFFF88003FC3F510] [00] bus_get_status : Device [USB1] status [0000000f] pci_bind-0141 [FFFF88003FC3F510] [00] pci_bind : Binding PCI device [\_SB_.PCI0.USB1]... pci_bind-0171 [FFFF88003FC3F510] [00] pci_bind : ...to 00:00:1d.00 acpi_bus-0120 [FFFF88003FC3F510] [00] bus_get_status : Device [USB2] status [0000000f] pci_bind-0141 [FFFF88003FC3F510] [00] pci_bind : Binding PCI device [\_SB_.PCI0.USB2]... pci_bind-0171 [FFFF88003FC3F510] [00] pci_bind : ...to 00:00:1d.01 acpi_bus-0120 [FFFF88003FC3F510] [00] bus_get_status : Device [USB3] status [0000000f] pci_bind-0141 [FFFF88003FC3F510] [00] pci_bind : Binding PCI device [\_SB_.PCI0.USB3]... pci_bind-0171 [FFFF88003FC3F510] [00] pci_bind : ...to 00:00:1d.02 acpi_bus-0120 [FFFF88003FC3F510] [00] bus_get_status : Device [USB4] status [0000000f] pci_bind-0141 [FFFF88003FC3F510] [00] pci_bind : Binding PCI device [\_SB_.PCI0.USB4]... pci_bind-0171 [FFFF88003FC3F510] [00] pci_bind : ...to 00:00:1a.00 acpi_bus-0120 [FFFF88003FC3F510] [00] bus_get_status : Device [USB5] status [0000000f] pci_bind-0141 [FFFF88003FC3F510] [00] pci_bind : Binding PCI device [\_SB_.PCI0.USB5]... pci_bind-0171 [FFFF88003FC3F510] [00] pci_bind : ...to 00:00:1a.01 acpi_bus-0120 [FFFF88003FC3F510] [00] bus_get_status : Device [USB6] status [0000000f] pci_bind-0141 [FFFF88003FC3F510] [00] pci_bind : Binding PCI device [\_SB_.PCI0.USB6]... pci_bind-0171 [FFFF88003FC3F510] [00] pci_bind : ...to 00:00:1a.02 pci_bind-0201 [FFFF88003FC3F510] [00] pci_bind : Device 00:00:1a.02 not present in PCI namespace acpi_bus-0120 [FFFF88003FC3F510] [00] bus_get_status : Device [EUS1] status [0000000f] pci_bind-0141 [FFFF88003FC3F510] [00] pci_bind : Binding PCI device [\_SB_.PCI0.EUS1]... pci_bind-0171 [FFFF88003FC3F510] [00] pci_bind : ...to 00:00:1d.07 acpi_bus-0120 [FFFF88003FC3F510] [00] bus_get_status : Device [EUS2] status [0000000f] pci_bind-0141 [FFFF88003FC3F510] [00] pci_bind : Binding PCI device [\_SB_.PCI0.EUS2]... pci_bind-0171 [FFFF88003FC3F510] [00] pci_bind : ...to 00:00:1a.07 acpi_bus-0120 [FFFF88003FC3F510] [00] bus_get_status : Device [SBD1] status [0000000f] acpi_bus-0120 [FFFF88003FC3F510] [00] bus_get_status : Device [SBD2] status [0000000f] acpi_bus-0120 [FFFF88003FC3F510] [00] bus_get_status : Device [SBD3] status [0000000f] acpi_bus-0120 [FFFF88003FC3F510] [00] bus_get_status : Device [SATA] status [0000000f] pci_bind-0141 [FFFF88003FC3F510] [00] pci_bind : Binding PCI device [\_SB_.PCI0.SATA]... pci_bind-0171 [FFFF88003FC3F510] [00] pci_bind : ...to 00:00:1f.02 acpi_bus-0120 [FFFF88003FC3F510] [00] bus_get_status : Device [SAT0] status [0000000f] acpi_bus-0120 [FFFF88003FC3F510] [00] bus_get_status : Device [DRV0] status [0000000f] acpi_bus-0120 [FFFF88003FC3F510] [00] bus_get_status : Device [SAT1] status [0000000f] acpi_bus-0120 [FFFF88003FC3F510] [00] bus_get_status : Device [DRV0] status [0000000f] acpi_bus-0120 [FFFF88003FC3F510] [00] bus_get_status : Device [GFX0] status [0000000f] pci_bind-0141 [FFFF88003FC3F510] [00] pci_bind : Binding PCI device [\_SB_.PCI0.GFX0]... pci_bind-0171 [FFFF88003FC3F510] [00] pci_bind : ...to 00:00:02.00 acpi_utils-0288 [FFFF88003FC3F510] [00] evaluate_integer : Return value [15] acpi_bus-0120 [FFFF88003FC3F510] [00] bus_get_status : Device [IEIT] status [0000000f] acpi_bus-0120 [FFFF88003FC3F510] [00] bus_get_status : Device [MBRD] status [0000000f] acpi_bus-0120 [FFFF88003FC3F510] [00] bus_get_status : Device [PBTN] status [0000000f] acpi_bus-0120 [FFFF88003FC3F510] [00] bus_get_status : Device [WMID] status [0000000f] Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init pnp: ACPI device : hid PNP0A08 pnp: ACPI device : hid PNP0C04 pnp: ACPI device : hid PNP0200 pnp: ACPI device : hid PNP0B00 pnp: ACPI device : hid PNP0800 pnp: ACPI device : hid PNP0F13 pnp: ACPI device : hid PNP0303 pnp: ACPI device : hid PNP0401 pnp: ACPI device : hid PNP0501 pnp: ACPI device : hid PNP0700 pnp: ACPI device : hid PNP0003 pnp: ACPI device : hid IFX0102 pnp: ACPI device : hid PNP0103 pnp: ACPI device : hid PNP0C02 pnp: ACPI device : hid PNP0C02 pnp: ACPI device : hid PNP0C02 pnp: ACPI device : hid PNP0C01 pnp: PnP ACPI: found 17 devices xen_mem: Initialising balloon driver. PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report PCI: Cannot allocate resource region 1 of device 0000:01:00.0 PCI: Cannot allocate resource region 1 of device 0000:01:00.1 scan-0543 [FFFF88003FC3F510] [00] bus_driver_init : Driver successfully bound to device scan-0585 [FFFF88003FC3F510] [00] driver_attach : Found driver [motherboard] for device [MBRD] scan-0543 [FFFF88003FC3F510] [00] bus_driver_init : Driver successfully bound to device scan-0585 [FFFF88003FC3F510] [00] driver_attach : Found driver [motherboard] for device [SBD1] acpi_motherboard-0067 [FFFF88003FC3F510] [01] reserve_io_ranges : Motherboard resources 0x0000f800 - 0x0000f820 acpi_motherboard-0067 [FFFF88003FC3F510] [01] reserve_io_ranges : Motherboard resources 0x0000f820 - 0x0000f840 acpi_motherboard-0067 [FFFF88003FC3F510] [01] reserve_io_ranges : Motherboard resources 0x0000f840 - 0x0000f860 acpi_motherboard-0067 [FFFF88003FC3F510] [01] reserve_io_ranges : Motherboard resources 0x0000f860 - 0x0000f880 acpi_motherboard-0067 [FFFF88003FC3F510] [01] reserve_io_ranges : Motherboard resources 0x0000fa00 - 0x0000fa40 acpi_motherboard-0067 [FFFF88003FC3F510] [01] reserve_io_ranges : Motherboard resources 0x0000fc00 - 0x0000fc80 acpi_motherboard-0067 [FFFF88003FC3F510] [01] reserve_io_ranges : Motherboard resources 0x0000fc80 - 0x0000fd00 acpi_motherboard-0067 [FFFF88003FC3F510] [01] reserve_io_ranges : Motherboard resources 0x0000fe00 - 0x0000fe80 acpi_motherboard-0067 [FFFF88003FC3F510] [01] reserve_io_ranges : Motherboard resources 0x0000fe80 - 0x0000ff00 scan-0543 [FFFF88003FC3F510] [00] bus_driver_init : Driver successfully bound to device scan-0585 [FFFF88003FC3F510] [00] driver_attach : Found driver [motherboard] for device [SBD2] scan-0543 [FFFF88003FC3F510] [00] bus_driver_init : Driver successfully bound to device scan-0585 [FFFF88003FC3F510] [00] driver_attach : Found driver [motherboard] for device [SBD3] scan-0543 [FFFF88003FC3F510] [00] bus_driver_init : Driver successfully bound to device scan-0585 [FFFF88003FC3F510] [00] driver_attach : Found driver [motherboard] for device [IEIT] pnp: the driver 'system' has been registered pnp: match found with the PnP device '00:0d' and the driver 'system' pnp: match found with the PnP device '00:0e' and the driver 'system' pnp: 00:0e: ioport range 0x400-0x41f has been reserved pnp: 00:0e: ioport range 0x420-0x43f has been reserved pnp: 00:0e: ioport range 0x440-0x45f has been reserved pnp: 00:0e: ioport range 0x460-0x47f could not be reserved pnp: 00:0e: ioport range 0x480-0x48f has been reserved pnp: 00:0e: ioport range 0xf800-0xf81f could not be reserved pnp: 00:0e: ioport range 0xf820-0xf83f could not be reserved pnp: 00:0e: ioport range 0xf840-0xf85f has been reserved pnp: match found with the PnP device '00:0f' and the driver 'system' pnp: 00:0f: ioport range 0x4d0-0x4d1 has been reserved pnp: match found with the PnP device '00:10' and the driver 'system' (XEN) PCI add device 00:00.0 (XEN) PCI add device 00:01.0 (XEN) PCI add device 00:02.0 (XEN) PCI add device 00:03.0 (XEN) PCI add device 00:03.2 (XEN) PCI add device 00:03.3 (XEN) PCI add device 00:19.0 (XEN) PCI add device 00:1a.0 (XEN) PCI add device 00:1a.1 (XEN) PCI add device 00:1a.7 (XEN) PCI add device 00:1b.0 (XEN) PCI add device 00:1c.0 (XEN) PCI add device 00:1c.1 (XEN) PCI add device 00:1d.0 (XEN) PCI add device 00:1d.1 (XEN) PCI add device 00:1d.2 (XEN) PCI add device 00:1d.7 (XEN) PCI add device 00:1e.0 (XEN) PCI add device 00:1f.0 (XEN) PCI add device 00:1f.2 (XEN) PCI add device 00:1f.5 (XEN) PCI add device 01:00.0 (XEN) PCI add device 01:00.1 (XEN) PCI add device 30:00.0 (XEN) PCI add device 07:04.0 (XEN) PCI add device 07:0b.0 PCI: Ignore bogus resource 6 [0:0] of 0000:00:02.0 PCI: Bridge: 0000:00:01.0 IO window: 3000-3fff MEM window: f0000000-f08fffff PREFETCH window: f1000000-f17fffff PCI: Bridge: 0000:00:1c.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:1c.1 IO window: 1000-1fff MEM window: f0d00000-f0dfffff PREFETCH window: f0e00000-f0efffff PCI: Bridge: 0000:00:1e.0 IO window: 2000-2fff MEM window: f0900000-f0afffff PREFETCH window: f1800000-f19fffff acpi_bus-0198 [FFFF88003FC3F510] [00] bus_set_power : Device `[PEG1]' is not power manageable pci_irq-0315 [FFFF88003FC3F510] [00] pci_irq_lookup : Searching for PRT entry for 00:00:01[A] pci_irq-0277 [FFFF88003FC3F510] [00] pci_allocate_irq : Found IRQ 16 GSI 16 sharing vector 0x10 and IRQ 16 (XEN) allocated vector for irq:16 ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:01.0 to 64 acpi_bus-0198 [FFFF88003FC3F510] [00] bus_set_power : Device `[PCX1]' is not power manageable pci_irq-0408 [FFFF88003FC3F510] [00] pci_irq_enable : No interrupt pin configured for device 0000:00:1c.0 PCI: Setting latency timer of device 0000:00:1c.0 to 64 acpi_bus-0198 [FFFF88003FC3F510] [00] bus_set_power : Device `[PCX2]' is not power manageable pci_irq-0315 [FFFF88003FC3F510] [00] pci_irq_lookup : Searching for PRT entry for 00:00:1c[B] pci_irq-0277 [FFFF88003FC3F510] [00] pci_allocate_irq : Found IRQ 21 GSI 17 sharing vector 0x11 and IRQ 17 (XEN) allocated vector for irq:21 ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 21 (level, low) -> IRQ 17 PCI: Setting latency timer of device 0000:00:1c.1 to 64 pci_irq-0408 [FFFF88003FC3F510] [00] pci_irq_enable : No interrupt pin configured for device 0000:00:1e.0 PCI: Setting latency timer of device 0000:00:1e.0 to 64 NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 6, 262144 bytes) TCP established hash table entries: 131072 (order: 9, 2097152 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered MCE: bind virq for DOM0 logging MCE_DOM0_LOG: enter dom0 mce vIRQ handler MCE_DOM0_LOG: No more urgent data MCE_DOM0_LOG: No more nonurgent data IA-32 Microcode Update Driver: v1.14a-xen io scheduler noop registered io scheduler anticipatory registered (default) io scheduler deadline registered io scheduler cfq registered RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize loop: loaded (max 8 devices) Xen virtual console successfully installed as xvc0 Event-channel device installed. blktap_device_init: blktap device major 254 blktap_ring_init: blktap ring major: 253 netfront: Initialising virtual ethernet driver. Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx (XEN) PCI add device 00:03.2 (XEN) PCI add device 00:1f.2 (XEN) PCI add device 00:1f.5 Probing IDE interface ide0... (XEN) irq.c:1139:d0 Cannot bind IRQ 2 to guest. In use by 'cascade'. (XEN) irq.c:1139:d0 Cannot bind IRQ 2 to guest. In use by 'cascade'. hda: ST380815AS, ATA DISK drive Probing IDE interface ide1... (XEN) irq.c:1139:d0 Cannot bind IRQ 2 to guest. In use by 'cascade'. (XEN) irq.c:1139:d0 Cannot bind IRQ 2 to guest. In use by 'cascade'. hdc: TSSTcorpDVD-ROM TS-H353B, ATAPI CD/DVD-ROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 hda: max request size: 512KiB hda: 156301488 sectors (80026 MB) w/8192KiB Cache, CHS=16383/255/63 hda: cache flushes supported hda: hda1 hda2 hdc: ATAPI 48X DVD-ROM drive, 198kB Cache Uniform CD-ROM driver Revision: 3.20 pnp: the driver 'i8042 kbd' has been registered pnp: match found with the PnP device '00:06' and the driver 'i8042 kbd' pnp: the driver 'i8042 aux' has been registered pnp: match found with the PnP device '00:05' and the driver 'i8042 aux' PNP: PS/2 Controller [PNP0303:KBD,PNP0f0e:PS2M] at 0x60,0x64 irq 1,12 serio: i8042 AUX port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 mice: PS/2 mouse device common for all mice device-mapper: ioctl: 4.7.0-ioctl (2006-06-24) initialised: dm-devel@xxxxxxxxxx TCP bic registered NET: Registered protocol family 1 NET: Registered protocol family 17 input: AT Translated Set 2 keyboard as /class/input/input0 Bridge firewalling registered PCI IO multiplexer device installed. ACPI: (supports S0 S3 S4 S5) BIOS EDD facility v0.16 2004-Jun-25, 1 devices found Freeing unused kernel memory: 172k freed Loading, please wait... Begin: Loading essential drivers ... done. Begin: Running /scripts/init-premount ... **** Context Switch from TID 3FC3F510 to TID 3F26C240 **** scan-0543 [FFFF88003F26C240] [00] bus_driver_init : Driver successfully bound to device ACPI (exconfig-0455): Dynamic SSDT Load - OemId [COMPAQ] OemTableId [ CPU_TM2] [20060707] ACPI (exconfig-0455): Dynamic SSDT Load - OemId [COMPAQ] OemTableId [ CST] [20060707] acpi_utils-0288 [FFFF88003F26C240] [00] evaluate_integer : Return value [0] (XEN) Set CPU acpi_id(1) cpuid(0) Px State info: (XEN) _PPC: 0 ACPI: CPU0 (power states: C1[C1] C2[C2]) acpi_utils-0288 [FFFF88003F26C240] [00] evaluate_integer : Return value [0] (XEN) Set CPU acpi_id(1) cpuid(0) Px State info: (XEN) _PCT: descriptor=130, length=12, space_id=127, bit_width=64, bit_offset=0, reserved=0, address=409 (XEN) _PCT: descriptor=130, length=12, space_id=127, bit_width=16, bit_offset=0, reserved=0, address=408 (XEN) _PSS: state_count=2 (XEN) State0: 2833MHz 135000mW 10us 10us 0x4822 0x4822 (XEN) State1: 1998MHz 87483mW 10us 10us 0x61a 0x61a (XEN) _PSD: num_entries=5 rev=0 domain=1 coord_type=252 num_processors=1 (XEN) _PPC: 0 (XEN) xen_pminfo: @acpi_cpufreq_cpu_init,HARDWARE addr space (XEN) CPU 0 initialization completed ACPI: Processor [CPU0] (supports 8 throttling states) scan-0585 [FFFF88003F26C240] [00] driver_attach : Found driver [ACPI Processor Driver] for device [CPU0] scan-0543 [FFFF88003F26C240] [00] bus_driver_init : Driver successfully bound to device acpi_utils-0288 [FFFF88003F26C240] [00] evaluate_integer : Return value [0] (XEN) Set CPU acpi_id(2) cpuid(1) Px State info: (XEN) _PPC: 0 ACPI: CPU1 (power states: C1[C1] C2[C2]) acpi_utils-0288 [FFFF88003F26C240] [00] evaluate_integer : Return value [0] (XEN) Set CPU acpi_id(2) cpuid(1) Px State info: (XEN) _PCT: descriptor=130, length=12, space_id=127, bit_width=64, bit_offset=0, reserved=0, address=409 (XEN) _PCT: descriptor=130, length=12, space_id=127, bit_width=16, bit_offset=0, reserved=0, address=408 (XEN) _PSS: state_count=2 (XEN) State0: 2833MHz 135000mW 10us 10us 0x4822 0x4822 (XEN) State1: 1998MHz 87483mW 10us 10us 0x61a 0x61a (XEN) _PSD: num_entries=5 rev=0 domain=2 coord_type=252 num_processors=1 (XEN) _PPC: 0 (XEN) xen_pminfo: @acpi_cpufreq_cpu_init,HARDWARE addr space (XEN) CPU 1 initialization completed ACPI: Processor [CPU1] (supports 8 throttling states) scan-0585 [FFFF88003F26C240] [00] driver_attach : Found driver [ACPI Processor Driver] for device [CPU1] scan-0543 [FFFF88003F26C240] [00] bus_driver_init : Driver successfully bound to device acpi_utils-0274 [FFFF88003F26C240] [00] evaluate_integer : Evaluate [\_PR_.CPU2._STA]: AE_NOT_FOUND ACPI Exception (acpi_processor-0721): AE_NOT_FOUND, Processor Device is not present [20060707] acpi_utils-0288 [FFFF88003F26C240] [00] evaluate_integer : Return value [0] ACPI: CPU-1 (power states: C1[C1] C2[C2]) (XEN) no cpu_id for acpi_id 3 acpi_utils-0288 [FFFF88003F26C240] [00] evaluate_integer : Return value [0] scan-0585 [FFFF88003F26C240] [00] driver_attach : Found driver [ACPI Processor Driver] for device [CPU2] scan-0543 [FFFF88003F26C240] [00] bus_driver_init : Driver successfully bound to device acpi_utils-0274 [FFFF88003F26C240] [00] evaluate_integer : Evaluate [\_PR_.CPU3._STA]: AE_NOT_FOUND ACPI Exception (acpi_processor-0721): AE_NOT_FOUND, Processor Device is not present [20060707] acpi_utils-0288 [FFFF88003F26C240] [00] evaluate_integer : Return value [0] ACPI: CPU-1 (power states: C1[C1] C2[C2]) (XEN) no cpu_id for acpi_id 4 acpi_utils-0288 [FFFF88003F26C240] [00] evaluate_integer : Return value [0] scan-0585 [FFFF88003F26C240] [00] driver_attach : Found driver [ACPI Processor Driver] for device [CPU3] acpi_utils-0274 [FFFF88003F26C240] [00] evaluate_integer : Evaluate [\_TZ_._TMP]: AE_NOT_FOUND udevd[915]: main: the kernel does not support inotify, udevd can't monitor rules file changes done. Begin: Mounting root file system ... Begin: Running /scripts/local-top ... 4 logical volume(s) in volume group "sam" now active 4 logical volume(s) in volume group "sam" now active done. Begin: Running /scripts/local-premount ... done. kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. Begin: Running /scripts/local-bottom ... done. done. Begin: Running /scripts/init-bottom ... done. INIT: version 2.86 booting ... success!