root (hd0,0) Filesystem type is ext2fs, partition type 0x83 kernel /xen noreboot com1=115200,8n1,0x3f8,0 sync_console console=com1 loglvl= all guest_loglvl=all vtd=1 iommu dom0_mem=1G [Multiboot-elf, <0x100000:0x16d000:0xbe000>, shtab=0x32b078, entry=0x100000] module /vmlinuz-2.6.18.8 root=/dev/mapper/sam-root_x86_64 console=ttyS0 loglev el=8 ro acpi_dbg_layer=0xffff0000 acpi_dbg_level=0xffffffff [Multiboot-module @ 0x32c000, 0x76de88 bytes] module /initrd.img-2.6.18.8 [Multiboot-module @ 0xa9a000, 0x761000 bytes] __ __ _ _ ___ ___ _____ \ \/ /___ _ __ | || | / _ \ / _ \ _ __ ___|___ / _ __ _ __ ___ \ // _ \ '_ \ | || |_| | | | | | |__| '__/ __| |_ \ __| '_ \| '__/ _ \ / \ __/ | | | |__ _| |_| | |_| |__| | | (__ ___) |__| |_) | | | __/ /_/\_\___|_| |_| |_|(_)___(_)___/ |_| \___|____/ | .__/|_| \___| |_| (XEN) Xen version 4.0.0-rc3-pre (horms@xxxxxxxxxxxxxxxxxxxxxxxx) (gcc version 4.3.2 (Debian 4.3.2-1.1) ) Mon Feb 8 14:51:01 JST 2010 (XEN) Latest ChangeSet: Fri Feb 05 13:57:20 2010 +0000 20905:b60379dad533 (XEN) Console output is synchronous. (XEN) Command line: noreboot com1=115200,8n1,0x3f8,0 sync_console console=com1 loglvl=all guest_loglvl=all vtd=1 iommu dom0_mem=1G (XEN) Video information: (XEN) VGA is text mode 80x25, font 8x16 (XEN) VBE/DDC methods: none; EDID transfer time: 0 seconds (XEN) EDID info not retrieved because no DDC retrieval method detected (XEN) Disc information: (XEN) Found 1 MBR signatures (XEN) Found 1 EDD information structures (XEN) Xen-e820 RAM map: (XEN) 0000000000000000 - 000000000009fc00 (usable) (XEN) 000000000009fc00 - 00000000000a0000 (reserved) (XEN) 00000000000e8000 - 0000000000100000 (reserved) (XEN) 0000000000100000 - 00000000defafe00 (usable) (XEN) 00000000defafe00 - 00000000defb1ea0 (ACPI NVS) (XEN) 00000000defb1ea0 - 00000000e0000000 (reserved) (XEN) 00000000f4000000 - 00000000f8000000 (reserved) (XEN) 00000000fec00000 - 00000000fed40000 (reserved) (XEN) 00000000fed45000 - 0000000100000000 (reserved) (XEN) 0000000100000000 - 000000011c000000 (usable) (XEN) ACPI: RSDP 000E5C10, 0014 (r0 COMPAQ) (XEN) ACPI: RSDT DEFC1E40, 0044 (r1 HPQOEM SLIC-BPC 20090226 0) (XEN) ACPI: FACP DEFC1EE8, 0074 (r1 COMPAQ BEARLAKE 1 0) (XEN) ACPI: DSDT DEFC2427, A370 (r1 COMPAQ DSDT_PRJ 1 MSFT 100000E) (XEN) ACPI: FACS DEFC1E00, 0040 (XEN) ACPI: APIC DEFC1F5C, 0084 (r1 COMPAQ BEARLAKE 1 0) (XEN) ACPI: ASF! DEFC1FE0, 0063 (r32 COMPAQ BEARLAKE 1 0) (XEN) ACPI: MCFG DEFC2043, 003C (r1 COMPAQ BEARLAKE 1 0) (XEN) ACPI: TCPA DEFC207F, 0032 (r1 COMPAQ BEARLAKE 1 0) (XEN) ACPI: SLIC DEFC20B1, 0176 (r1 HPQOEM SLIC-BPC 1 0) (XEN) ACPI: HPET DEFC2227, 0038 (r1 COMPAQ BEARLAKE 1 0) (XEN) ACPI: DMAR DEFC225F, 0198 (r1 COMPAQ BEARLAKE 1 0) (XEN) System RAM: 3997MB (4093652kB) (XEN) No NUMA configuration found (XEN) Faking a node at 0000000000000000-000000011c000000 (XEN) Domain heap initialised (XEN) found SMP MP-table at 000f9bf0 (XEN) DMI 2.5 present. (XEN) Using APIC driver default (XEN) ACPI: PM-Timer IO Port: 0xf808 (XEN) ACPI: ACPI SLEEP INFO: pm1x_cnt[f804,460], pm1x_evt[f800,0] (XEN) ACPI: wakeup_vec[defc1e0c], vec_size[20] (XEN) ACPI: Local APIC address 0xfee00000 (XEN) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) (XEN) Processor #0 7:7 APIC version 20 (XEN) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) (XEN) Processor #1 7:7 APIC version 20 (XEN) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x00] disabled) (XEN) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x00] disabled) (XEN) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) (XEN) ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) (XEN) ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) (XEN) ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1]) (XEN) ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) (XEN) IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23 (XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) (XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) (XEN) ACPI: IRQ0 used by override. (XEN) ACPI: IRQ2 used by override. (XEN) ACPI: IRQ9 used by override. (XEN) Enabling APIC mode: Flat. Using 1 I/O APICs (XEN) ACPI: HPET id: 0x8086a201 base: 0xfed00000 (XEN) [VT-D]dmar.c:631: Host address width 36 (XEN) [VT-D]dmar.c:640: found ACPI_DMAR_DRHD: (XEN) [VT-D]dmar.c:374: dmaru->address = fed90000 (XEN) [VT-D]dmar.c:326: endpoint: 0:1b.0 (XEN) [VT-D]dmar.c:640: found ACPI_DMAR_DRHD: (XEN) [VT-D]dmar.c:374: dmaru->address = fed91000 (XEN) [VT-D]dmar.c:326: endpoint: 0:2.0 (XEN) [VT-D]dmar.c:640: found ACPI_DMAR_DRHD: (XEN) [VT-D]dmar.c:374: dmaru->address = fed92000 (XEN) [VT-D]dmar.c:326: endpoint: 0:3.0 (XEN) [VT-D]dmar.c:326: endpoint: 0:3.2 (XEN) [VT-D]dmar.c:326: endpoint: 0:3.3 (XEN) [VT-D]dmar.c:640: found ACPI_DMAR_DRHD: (XEN) [VT-D]dmar.c:374: dmaru->address = fed93000 (XEN) [VT-D]dmar.c:386: flags: INCLUDE_ALL (XEN) [VT-D]dmar.c:644: found ACPI_DMAR_RMRR: (XEN) [VT-D]dmar.c:326: endpoint: 0:2.0 (XEN) [VT-D]dmar.c:535: RMRR region: base_addr df600000 end_address dfffffff (XEN) [VT-D]dmar.c:644: found ACPI_DMAR_RMRR: (XEN) [VT-D]dmar.c:326: endpoint: 0:1d.7 (XEN) [VT-D]dmar.c:535: RMRR region: base_addr defd0000 end_address defd0fff (XEN) [VT-D]dmar.c:644: found ACPI_DMAR_RMRR: (XEN) [VT-D]dmar.c:326: endpoint: 0:1a.7 (XEN) [VT-D]dmar.c:535: RMRR region: base_addr defd1000 end_address defd1fff (XEN) [VT-D]dmar.c:644: found ACPI_DMAR_RMRR: (XEN) [VT-D]dmar.c:326: endpoint: 0:1d.0 (XEN) [VT-D]dmar.c:535: RMRR region: base_addr defd2000 end_address defd2fff (XEN) [VT-D]dmar.c:644: found ACPI_DMAR_RMRR: (XEN) [VT-D]dmar.c:326: endpoint: 0:1d.1 (XEN) [VT-D]dmar.c:535: RMRR region: base_addr defd3000 end_address defd3fff (XEN) [VT-D]dmar.c:644: found ACPI_DMAR_RMRR: (XEN) [VT-D]dmar.c:326: endpoint: 0:1d.2 (XEN) [VT-D]dmar.c:535: RMRR region: base_addr defd4000 end_address defd4fff (XEN) [VT-D]dmar.c:644: found ACPI_DMAR_RMRR: (XEN) [VT-D]dmar.c:326: endpoint: 0:1a.0 (XEN) [VT-D]dmar.c:535: RMRR region: base_addr defd5000 end_address defd5fff (XEN) [VT-D]dmar.c:644: found ACPI_DMAR_RMRR: (XEN) [VT-D]dmar.c:326: endpoint: 0:1a.1 (XEN) [VT-D]dmar.c:535: RMRR region: base_addr defd6000 end_address defd6fff (XEN) PCI: MCFG configuration 0: base f4000000 segment 0 buses 0 - 63 (XEN) PCI: MCFG area at f4000000 reserved in E820 (XEN) Using ACPI (MADT) for SMP configuration information (XEN) Using scheduler: SMP Credit Scheduler (credit) (XEN) Initializing CPU#0 (XEN) Detected 2826.341 MHz processor. (XEN) Initing memory sharing. (XEN) CPU: L1 I cache: 32K, L1 D cache: 32K (XEN) CPU: L2 cache: 6144K (XEN) CPU: Physical Processor ID: 0 (XEN) CPU: Processor Core ID: 0 (XEN) VMX: Supported advanced features: (XEN) - APIC MMIO access virtualisation (XEN) - APIC TPR shadow (XEN) - Virtual NMI (XEN) - MSR direct-access bitmap (XEN) HVM: ASIDs disabled. (XEN) HVM: VMX enabled (XEN) Intel machine check reporting enabled on CPU#0. (XEN) CPU0: Thermal monitoring enabled (TM2) (XEN) CMCI: CPU0 has no CMCI support (XEN) [VT-D]iommu.c:1062: drhd->address = fed92000 (XEN) [VT-D]iommu.c:1063: iommu->reg = ffff82c3fff57000 (XEN) [VT-D]iommu.c:1062: drhd->address = fed91000 (XEN) [VT-D]iommu.c:1063: iommu->reg = ffff82c3fff56000 (XEN) [VT-D]iommu.c:1062: drhd->address = fed90000 (XEN) [VT-D]iommu.c:1063: iommu->reg = ffff82c3fff55000 (XEN) [VT-D]iommu.c:1062: drhd->address = fed93000 (XEN) [VT-D]iommu.c:1063: iommu->reg = ffff82c3fff54000 (XEN) Intel VT-d Snoop Control not supported. (XEN) Intel VT-d DMA Passthrough not supported. (XEN) Intel VT-d Queued Invalidation not supported. (XEN) Intel VT-d Interrupt Remapping not supported. (XEN) I/O virtualisation enabled (XEN) I/O virtualisation for PV guests disabled (XEN) CPU0: Intel(R) Core(TM)2 Duo CPU E8300 @ 2.83GHz stepping 06 (XEN) Booting processor 1/1 eip 8c000 (XEN) Initializing CPU#1 (XEN) CPU: L1 I cache: 32K, L1 D cache: 32K (XEN) CPU: L2 cache: 6144K (XEN) CPU: Physical Processor ID: 0 (XEN) CPU: Processor Core ID: 1 (XEN) HVM: ASIDs disabled. (XEN) Intel machine check reporting enabled on CPU#1. (XEN) CPU1: Thermal monitoring enabled (TM2) (XEN) CMCI: CPU1 has no CMCI support (XEN) CPU1: Intel(R) Core(TM)2 Duo CPU E8300 @ 2.83GHz stepping 06 (XEN) Total of 2 processors activated. (XEN) ENABLING IO-APIC IRQs (XEN) -> Using new ACK method (XEN) ..TIMER: vector=0xF0 apic1=0 pin1=2 apic2=-1 pin2=-1 (XEN) checking TSC synchronization across 2 CPUs: passed. (XEN) Platform timer is 14.318MHz HPET (XEN) Brought up 2 CPUs (XEN) microcode.c:73:d32767 microcode: CPU1 resumed (XEN) HPET: 4 timers in total, 0 timers will be used for broadcast (XEN) ACPI sleep modes: S3 (XEN) mcheck_poll: Machine check polling timer started. (XEN) [VT-D]iommu.c:1306:d32767 domain_context_mapping:PCI: bdf = 0:0.0 (XEN) [VT-D]mmconfig-shared.c:460: next cap:0:0.0: no extended config (XEN) [VT-D]iommu.c:1306:d32767 domain_context_mapping:PCI: bdf = 0:2.0 (XEN) [VT-D]mmconfig-shared.c:460: next cap:0:2.0: no extended config (XEN) [VT-D]iommu.c:1306:d32767 domain_context_mapping:PCI: bdf = 0:3.0 (XEN) [VT-D]mmconfig-shared.c:460: next cap:0:3.0: no extended config (XEN) [VT-D]iommu.c:1306:d32767 domain_context_mapping:PCI: bdf = 0:3.2 (XEN) [VT-D]mmconfig-shared.c:460: next cap:0:3.2: no extended config (XEN) [VT-D]iommu.c:1306:d32767 domain_context_mapping:PCI: bdf = 0:3.3 (XEN) [VT-D]mmconfig-shared.c:460: next cap:0:3.3: no extended config (XEN) [VT-D]iommu.c:1306:d32767 domain_context_mapping:PCI: bdf = 0:19.0 (XEN) [VT-D]mmconfig-shared.c:460: next cap:0:19.0: no extended config (XEN) [VT-D]iommu.c:1306:d32767 domain_context_mapping:PCI: bdf = 0:1a.0 (XEN) [VT-D]mmconfig-shared.c:460: next cap:0:1a.0: no extended config (XEN) [VT-D]iommu.c:1306:d32767 domain_context_mapping:PCI: bdf = 0:1a.1 (XEN) [VT-D]mmconfig-shared.c:460: next cap:0:1a.1: no extended config (XEN) [VT-D]iommu.c:1306:d32767 domain_context_mapping:PCI: bdf = 0:1a.7 (XEN) [VT-D]mmconfig-shared.c:460: next cap:0:1a.7: no extended config (XEN) [VT-D]iommu.c:1299:d32767 domain_context_mapping:PCIe: bdf = 0:1b.0 (XEN) [VT-D]iommu.c:1306:d32767 domain_context_mapping:PCI: bdf = 0:1d.0 (XEN) [VT-D]mmconfig-shared.c:460: next cap:0:1d.0: no extended config (XEN) [VT-D]iommu.c:1306:d32767 domain_context_mapping:PCI: bdf = 0:1d.1 (XEN) [VT-D]mmconfig-shared.c:460: next cap:0:1d.1: no extended config (XEN) [VT-D]iommu.c:1306:d32767 domain_context_mapping:PCI: bdf = 0:1d.2 (XEN) [VT-D]mmconfig-shared.c:460: next cap:0:1d.2: no extended config (XEN) [VT-D]iommu.c:1306:d32767 domain_context_mapping:PCI: bdf = 0:1d.7 (XEN) [VT-D]mmconfig-shared.c:460: next cap:0:1d.7: no extended config (XEN) [VT-D]mmconfig-shared.c:460: next cap:0:1e.0: no extended config (XEN) [VT-D]iommu.c:1306:d32767 domain_context_mapping:PCI: bdf = 0:1f.0 (XEN) [VT-D]mmconfig-shared.c:460: next cap:0:1f.0: no extended config (XEN) [VT-D]iommu.c:1306:d32767 domain_context_mapping:PCI: bdf = 0:1f.2 (XEN) [VT-D]iommu.c:1306:d32767 domain_context_mapping:PCI: bdf = 0:1f.5 (XEN) [VT-D]iommu.c:1299:d32767 domain_context_mapping:PCIe: bdf = 1:0.0 (XEN) [VT-D]iommu.c:1299:d32767 domain_context_mapping:PCIe: bdf = 1:0.1 (XEN) [VT-D]iommu.c:1306:d32767 domain_context_mapping:PCI: bdf = 7:4.0 (XEN) [VT-D]mmconfig-shared.c:460: next cap:7:4.0: no extended config (XEN) [VT-D]iommu.c:1306:d32767 domain_context_mapping:PCI: bdf = 7:b.0 (XEN) [VT-D]mmconfig-shared.c:460: next cap:7:b.0: no extended config (XEN) [VT-D]iommu.c:1299:d32767 domain_context_mapping:PCIe: bdf = 30:0.0 (XEN) [VT-D]iommu.c:684: iommu_enable_translation: iommu->reg = ffff82c3fff57000 (XEN) [VT-D]iommu.c:684: iommu_enable_translation: iommu->reg = ffff82c3fff56000 (XEN) [VT-D]iommu.c:684: iommu_enable_translation: iommu->reg = ffff82c3fff55000 (XEN) [VT-D]iommu.c:684: iommu_enable_translation: iommu->reg = ffff82c3fff54000 (XEN) *** LOADING DOMAIN 0 *** (XEN) elf_parse_binary: phdr: paddr=0xffffffff80200000 memsz=0x2b89b0 (XEN) elf_parse_binary: phdr: paddr=0xffffffff804b9000 memsz=0x79248 (XEN) elf_parse_binary: phdr: paddr=0xffffffff80533000 memsz=0xc0d (XEN) elf_parse_binary: phdr: paddr=0xffffffff80534000 memsz=0xc0398 (XEN) elf_parse_binary: memory: 0xffffffff80200000 -> 0xffffffff805f4398 (XEN) elf_xen_parse_note: GUEST_OS = "linux" (XEN) elf_xen_parse_note: GUEST_VERSION = "2.6" (XEN) elf_xen_parse_note: XEN_VERSION = "xen-3.0" (XEN) elf_xen_parse_note: VIRT_BASE = 0xffffffff80000000 (XEN) elf_xen_parse_note: PADDR_OFFSET = 0xffffffff80000000 (XEN) elf_xen_parse_note: ENTRY = 0xffffffff80200000 (XEN) elf_xen_parse_note: HYPERCALL_PAGE = 0xffffffff80205000 (XEN) elf_xen_parse_note: unknown xen elf note (0xd) (XEN) elf_xen_parse_note: FEATURES = "writable_page_tables|writable_descriptor_tables|auto_translated_physmap|pae_pgdir_above_4gb|supervisor_mode_kernel" (XEN) elf_xen_parse_note: LOADER = "generic" (XEN) elf_xen_parse_note: SUSPEND_CANCEL = 0x1 (XEN) elf_xen_addr_calc_check: addresses: (XEN) virt_base = 0xffffffff80000000 (XEN) elf_paddr_offset = 0xffffffff80000000 (XEN) virt_offset = 0x0 (XEN) virt_kstart = 0xffffffff80200000 (XEN) virt_kend = 0xffffffff805f4398 (XEN) virt_entry = 0xffffffff80200000 (XEN) p2m_base = 0xffffffffffffffff (XEN) Xen kernel: 64-bit, lsb, compat32 (XEN) Dom0 kernel: 64-bit, lsb, paddr 0xffffffff80200000 -> 0xffffffff805f4398 (XEN) PHYSICAL MEMORY ARRANGEMENT: (XEN) Dom0 alloc.: 0000000117000000->0000000118000000 (258048 pages to be allocated) (XEN) VIRTUAL MEMORY ARRANGEMENT: (XEN) Loaded kernel: ffffffff80200000->ffffffff805f4398 (XEN) Init. ramdisk: ffffffff805f5000->ffffffff80d56000 (XEN) Phys-Mach map: ffffffff80d56000->ffffffff80f56000 (XEN) Start info: ffffffff80f56000->ffffffff80f564b4 (XEN) Page tables: ffffffff80f57000->ffffffff80f62000 (XEN) Boot stack: ffffffff80f62000->ffffffff80f63000 (XEN) TOTAL: ffffffff80000000->ffffffff81000000 (XEN) ENTRY ADDRESS: ffffffff80200000 (XEN) Dom0 has maximum 2 VCPUs (XEN) elf_load_binary: phdr 0 at 0xffffffff80200000 -> 0xffffffff804b89b0 (XEN) elf_load_binary: phdr 1 at 0xffffffff804b9000 -> 0xffffffff80532248 (XEN) elf_load_binary: phdr 2 at 0xffffffff80533000 -> 0xffffffff80533c0d (XEN) elf_load_binary: phdr 3 at 0xffffffff80534000 -> 0xffffffff8056cf68 (XEN) Scrubbing Free RAM: .............................done. (XEN) Xen trace buffers: disabled (XEN) tmem: initialized comp=0 global-lock=0 (XEN) Std. Loglevel: All (XEN) Guest Loglevel: All (XEN) ********************************************** (XEN) ******* WARNING: CONSOLE OUTPUT IS SYNCHRONOUS (XEN) ******* This option is intended to aid debugging of Xen by ensuring (XEN) ******* that all output is synchronously delivered on the serial line. (XEN) ******* However it can introduce SIGNIFICANT latencies and affect (XEN) ******* timekeeping. It is NOT recommended for production use! (XEN) ********************************************** (XEN) 3... 2... 1... (XEN) *** Serial input -> DOM0 (type 'CTRL-a' three times to switch input to Xen) (XEN) Freed 156kB init memory. kernel direct mapping tables up to 40800000 @ f63000-116a000 Bootdata ok (command line is root=/dev/mapper/sam-root_x86_64 console=ttyS0 loglevel=8 ro acpi_dbg_layer=0xffff0000 acpi_dbg_level=0xffffffff) Linux version 2.6.18.8 (horms@sam) (gcc version 4.3.2 (Debian 4.3.2-1.1) ) #11 SMP Mon Feb 15 14:37:44 JST 2010 BIOS-provided physical RAM map: Xen: 0000000000000000 - 0000000040800000 (usable) DMI 2.5 present. On node 0 totalpages: 260580 DMA zone: 4040 pages, LIFO batch:0 DMA32 zone: 256540 pages, LIFO batch:31 ACPI: RSDP (v000 COMPAQ ) @ 0x00000000000e5c10 ACPI: RSDT (v001 HPQOEM SLIC-BPC 0x20090226 0x00000000) @ 0x00000000defc1e40 ACPI: FADT (v001 COMPAQ BEARLAKE 0x00000001 0x00000000) @ 0x00000000defc1ee8 ACPI: MADT (v001 COMPAQ BEARLAKE 0x00000001 0x00000000) @ 0x00000000defc1f5c ACPI: ASF! (v032 COMPAQ BEARLAKE 0x00000001 0x00000000) @ 0x00000000defc1fe0 ACPI: MCFG (v001 COMPAQ BEARLAKE 0x00000001 0x00000000) @ 0x00000000defc2043 ACPI: TCPA (v001 COMPAQ BEARLAKE 0x00000001 0x00000000) @ 0x00000000defc207f ACPI: SLIC (v001 HPQOEM SLIC-BPC 0x00000001 0x00000000) @ 0x00000000defc20b1 ACPI: HPET (v001 COMPAQ BEARLAKE 0x00000001 0x00000000) @ 0x00000000defc2227 ACPI: (v001 COMPAQ BEARLAKE 0x00000001 0x00000000) @ 0x00000000defc225f >>> ERROR: Invalid checksum ACPI: DSDT (v001 COMPAQ DSDT_PRJ 0x00000001 MSFT 0x0100000e) @ 0x0000000000000000 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x00] disabled) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x00] disabled) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1]) ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Setting APIC routing to xen Using ACPI (MADT) for SMP configuration information Allocating PCI resources starting at e2000000 (gap: e0000000:14000000) Built 1 zonelists. Total pages: 260580 Kernel command line: root=/dev/mapper/sam-root_x86_64 console=ttyS0 loglevel=8 ro acpi_dbg_layer=0xffff0000 acpi_dbg_level=0xffffffff Initializing CPU#0 PID hash table entries: 4096 (order: 12, 32768 bytes) Xen reported: 2826.340 MHz processor. Console: colour VGA+ 80x25 Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes) Inode-cache hash table entries: 65536 (order: 7, 524288 bytes) Software IO TLB enabled: Aperture: 64 megabytes Kernel range: ffff88000233b000 - ffff88000633b000 Address size: 27 bits PCI-DMA: Using software bounce buffering for IO (SWIOTLB) Memory: 950264k/1056768k available (2370k kernel code, 98160k reserved, 828k data, 176k init) Calibrating delay using timer specific routine.. 5667.93 BogoMIPS (lpj=28339675) Mount-cache hash table entries: 256 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 6144K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 SMP alternatives: switching to UP code ACPI: Core revision 20060707 (XEN) io_apic.c:2291: (XEN) ioapic_guest_write: apic=0, pin=2, irq=0 (XEN) ioapic_guest_write: new_entry=00000900 (XEN) ioapic_guest_write: Attempt to modify IO-APIC pin for in-use IRQ! SMP alternatives: switching to SMP code Brought up 2 CPUs Initializing CPU#1 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 6144K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 migration_cost=11 checking if image is initramfs... it is Freeing initrd memory: 7556k freed NET: Registered protocol family 16 ACPI: bus type pci registered PCI: MCFG configuration 0: base f4000000 segment 0 buses 0 - 63 PCI: MCFG area at f4000000 reserved in E820 PCI: Using MMCONFIG at f4000000 - f7ffffff Initializing Region \BIOS Initializing Region \VECT Executing Method \_SB_.PCI0.LPC_._REG Executing Method \_SB_.PCI0.LPC_._REG Executing Method \_SB_.PCI0.LPC_._REG Executing Method \_SB_.PCI0.LPC_._REG Executing Method \_SB_.PCI0.LPC_._REG Initializing Region \_SB_.PCI0.MCHC Initializing Region \_SB_.PCI0.LPC_.PIRQ Initializing Region \_SB_.PCI0.LPC_.GPM1 Initializing Region \_SB_.PCI0.LPC_.L47B Initializing Region \_SB_.PCI0.LPC_.LPCC Initializing Region \_SB_.PCI0.LPC_.DCOD Initializing Region \_SB_.PCI0.PEG1.SLST Initializing Region \_SB_.PCI0.PEG1.RSTS Initializing Region \_SB_.PCI0.PEG1.PGLC Initializing Region \_SB_.PCI0.PEG2.SLST Initializing Region \_SB_.PCI0.PEG2.RSTS Initializing Region \_SB_.PCI0.PEG2.PGLC Initializing Region \_SB_.PCI0.IGBE.INCP Initializing Region \_SB_.PCI0.PCX1.SLST Initializing Region \_SB_.PCI0.PCX1.RSTS Initializing Region \_SB_.PCI0.PCX1.MPCR Initializing Region \_SB_.PCI0.PCX1.SSCS Initializing Region \_SB_.PCI0.PCX2.SLST Initializing Region \_SB_.PCI0.PCX2.RSTS Initializing Region \_SB_.PCI0.PCX2.MPCR Initializing Region \_SB_.PCI0.PCX2.SSCS Initializing Region \_SB_.PCI0.PCX5.SLST Initializing Region \_SB_.PCI0.PCX5.RSTS Initializing Region \_SB_.PCI0.PCX5.MPCR Initializing Region \_SB_.PCI0.PCX5.SSCS Initializing Region \_SB_.PCI0.PCX6.SLST Initializing Region \_SB_.PCI0.PCX6.RSTS Initializing Region \_SB_.PCI0.PCX6.MPCR Initializing Region \_SB_.PCI0.PCX6.SSCS Initializing Region \_SB_.PCI0.SATA.SATP Initializing Region \_SB_.PCI0.GFX0.VGAC Initializing Region \_SB_.PCI0.IEIT.EITO Initializing Region \SSCR Initializing Region \SSSR Initializing Region \SIPM Initializing Region \MBFD Initializing Region \RCPX Initializing Region \TCOB Initializing Region \DVMT Initializing Region \ECOB Executing Method \_SB_._STA Executing Method \_SB_._INI Executing Method \_SB_.PCI0._STA Executing Method \_SB_.PCI0._INI ACPI: Interpreter enabled ACPI: Using IOAPIC for interrupt routing **** Context Switch from TID 0 to TID 3FC3F510 **** acpi_bus-0120 [FFFF88003FC3F510] [00] bus_get_status : Device [CPU0] status [0000000f] acpi_bus-0120 [FFFF88003FC3F510] [00] bus_get_status : Device [CPU1] status [0000000f] acpi_bus-0120 [FFFF88003FC3F510] [00] bus_get_status : Device [CPU2] status [0000000f] acpi_bus-0120 [FFFF88003FC3F510] [00] bus_get_status : Device [CPU3] status [0000000f] acpi_bus-0120 [FFFF88003FC3F510] [00] bus_get_status : Device [_SB] status [0000000f] acpi_bus-0120 [FFFF88003FC3F510] [00] bus_get_status : Device [PCI0] status [0000000f] acpi_utils-0274 [FFFF88003FC3F510] [00] evaluate_integer : Evaluate [\_SB_.PCI0._SEG]: AE_NOT_FOUND pci_root-0226 [FFFF88003FC3F510] [00] pci_root_add : Assuming segment 0 (no _SEG) acpi_utils-0274 [FFFF88003FC3F510] [00] evaluate_integer : Evaluate [\_SB_.PCI0._BBN]: AE_NOT_FOUND pci_root-0247 [FFFF88003FC3F510] [00] pci_root_add : Assuming bus 0 (no _BBN) ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Probing PCI hardware (bus 00) acpi_utils-0274 [FFFF88003FC3F510] [02] evaluate_integer : Evaluate [\_SB_.PCI0._SEG]: AE_NOT_FOUND acpi_utils-0274 [FFFF88003FC3F510] [02] evaluate_integer : Evaluate [\_SB_.PCI0._BBN]: AE_NOT_FOUND ACPI: Assume root bridge [\_SB_.PCI0] bus is 0 acpi_utils-0274 [FFFF88003FC3F510] [19] evaluate_integer : Evaluate [\_SB_._ADR]: AE_NOT_FOUND acpi_utils-0288 [FFFF88003FC3F510] [19] evaluate_integer : Return value [0] acpi_utils-0288 [FFFF88003FC3F510] [19] evaluate_integer : Return value [2031616] It hangs here