[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.31.6 (root@serveerstertje) (gcc version 4.3.2 (Debian 4.3.2-1.1) ) #1 SMP Sun Dec 13 23:35:36 CET 2009 [ 0.000000] Command line: root=/dev/mapper/serveerstertje-root ro console=hvc0 console=tty1 earlyprintk=xen pciback.hide=(00:07.0)(06:01.0)(06:01.1)(06:01.2)(01:08.0)(01:08.1)(01:08.2)(01:0a.0) [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] xen_release_chunk: looking at area pfn 30000-afee0 [ 0.000000] xen_release_chunk: looking at area pfn aff00-b0000 [ 0.000000] xen_release_chunk: looking at area pfn c0000-f0000 [ 0.000000] xen_release_chunk: looking at area pfn f4000-fec00 [ 0.000000] released 0 pages of unused memory [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] Xen: 0000000000000000 - 000000000009f000 (usable) [ 0.000000] Xen: 000000000009f000 - 0000000000100000 (reserved) [ 0.000000] Xen: 0000000000100000 - 0000000030000000 (usable) [ 0.000000] Xen: 00000000afee0000 - 00000000afee3000 (ACPI NVS) [ 0.000000] Xen: 00000000afee3000 - 00000000afef0000 (ACPI data) [ 0.000000] Xen: 00000000afef0000 - 00000000aff00000 (reserved) [ 0.000000] Xen: 00000000b0000000 - 00000000c0000000 (reserved) [ 0.000000] Xen: 00000000f0000000 - 00000000f4000000 (reserved) [ 0.000000] Xen: 00000000fec00000 - 0000000100000000 (reserved) [ 0.000000] console [xenboot0] enabled [ 0.000000] DMI 2.5 present. [ 0.000000] Phoenix BIOS detected: BIOS may corrupt low RAM, working around it. [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0x30000 max_arch_pfn = 0x400000000 [ 0.000000] Scanning 0 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved) [ 0.000000] modified: 0000000000010000 - 000000000009f000 (usable) [ 0.000000] modified: 000000000009f000 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 0000000030000000 (usable) [ 0.000000] modified: 00000000afee0000 - 00000000afee3000 (ACPI NVS) [ 0.000000] modified: 00000000afee3000 - 00000000afef0000 (ACPI data) [ 0.000000] modified: 00000000afef0000 - 00000000aff00000 (reserved) [ 0.000000] modified: 00000000b0000000 - 00000000c0000000 (reserved) [ 0.000000] modified: 00000000f0000000 - 00000000f4000000 (reserved) [ 0.000000] modified: 00000000fec00000 - 0000000100000000 (reserved) [ 0.000000] initial memory mapped : 0 - 20000000 [ 0.000000] init_memory_mapping: 0000000000000000-0000000030000000 [ 0.000000] 0000000000 - 0030000000 page 4k [ 0.000000] kernel direct mapping tables up to 30000000 @ 100000-282000 [ 0.000000] RAMDISK: 01aca000 - 02094000 [ 0.000000] ACPI: RSDP 00000000000f7550 00024 (v02 Nvidia) [ 0.000000] ACPI: XSDT 00000000afee3100 0004C (v01 Nvidia ASUSACPI 42302E31 AWRD 00000000) [ 0.000000] ACPI: FACP 00000000afeed3c0 000F4 (v03 Nvidia ASUSACPI 42302E31 AWRD 00000000) [ 0.000000] ACPI Warning: Optional field Pm2ControlBlock has zero address or length: 0000000000000000/1 20090521 tbfadt-558 [ 0.000000] ACPI: DSDT 00000000afee3280 0A0D8 (v01 NVIDIA ASUSACPI 00001000 MSFT 03000000) [ 0.000000] ACPI: FACS 00000000afee0a80 00040 [ 0.000000] ACPI: SSDT 00000000afeed600 0028A (v01 PTLTD POWERNOW 00000001 LTP 00000001) [ 0.000000] ACPI: HPET 00000000afeed900 00038 (v01 Nvidia ASUSACPI 42302E31 AWRD 00000098) [ 0.000000] ACPI: MCFG 00000000afeed980 0003C (v01 Nvidia ASUSACPI 42302E31 AWRD 00000000) [ 0.000000] ACPI: APIC 00000000afeed500 0008E (v01 Nvidia ASUSACPI 42302E31 AWRD 00000000) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] (8 early reservations) ==> bootmem [0000000000 - 0030000000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0002215000 - 000222a000] XEN PAGETABLES ==> [0002215000 - 000222a000] [ 0.000000] #2 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] [ 0.000000] #3 [0001000000 - 0001aa9574] TEXT DATA BSS ==> [0001000000 - 0001aa9574] [ 0.000000] #4 [0001aca000 - 0002094000] RAMDISK ==> [0001aca000 - 0002094000] [ 0.000000] #5 [0002094000 - 0002215000] XEN START INFO ==> [0002094000 - 0002215000] [ 0.000000] #6 [0001aaa000 - 0001aaa151] BRK ==> [0001aaa000 - 0001aaa151] [ 0.000000] #7 [0000100000 - 000026a000] PGTABLE ==> [0000100000 - 000026a000] [ 0.000000] found SMP MP-table at [ffff8800000f59c0] f59c0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x00100000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x00030000 [ 0.000000] On node 0 totalpages: 196495 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 365 pages reserved [ 0.000000] DMA zone: 3562 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 2632 pages used for memmap [ 0.000000] DMA32 zone: 189880 pages, LIFO batch:31 [ 0.000000] Detected use of extended apic ids on hypertransport bus [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 4, version 17, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] ACPI: IRQ14 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfeff0000 [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 24 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 30000000 (gap: 30000000:7fee0000) [ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1 [ 0.000000] PERCPU: Allocated 22 4k pages, static data 88160 bytes [ 0.000000] trying to map vcpu_info 0 at ffffc9000000b060, mfn 1f6241, offset 96 [ 0.000000] cpu 0 using vcpu_info at ffffc9000000b060 [ 0.000000] trying to map vcpu_info 1 at ffffc90000023060, mfn 1f6257, offset 96 [ 0.000000] cpu 1 using vcpu_info at ffffc90000023060 [ 0.000000] Xen: using vcpu_info placement [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 193442 [ 0.000000] Kernel command line: root=/dev/mapper/serveerstertje-root ro console=hvc0 console=tty1 earlyprintk=xen pciback.hide=(00:07.0)(06:01.0)(06:01.1)(06:01.2)(01:08.0)(01:08.1)(01:08.2)(01:0a.0) [ 0.000000] Unknown boot option `pciback.hide=(00:07.0)(06:01.0)(06:01.1)(06:01.2)(01:08.0)(01:08.1)(01:08.2)(01:0a.0)': ignoring [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes) [ 0.000000] Initializing CPU#0 [ 0.000000] PCI-DMA: Using Xen software bounce buffering for IO (Xen-SWIOTLB) [ 0.000000] xen_swiotlb_fixup: buf=ffff8800030ab000 size=67108864 [ 0.000000] xen_swiotlb_fixup: buf=ffff88000710b000 size=32768 [ 0.000000] Placing 64MB Xen software IO TLB between ffff8800030ab000 - ffff8800070ab000 [ 0.000000] Xen software IO TLB at phys 0x30ab000 - 0x70ab000 [ 0.000000] Memory: 686848k/786432k available (5640k kernel code, 452k absent, 98460k reserved, 3626k data, 528k init) [ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:4352 nr_irqs:424 [ 0.000000] xen: registering gsi 0 triggering 1 polarity 0 [ 0.000000] xen: --> irq=0 [ 0.000000] xen_set_ioapic_routing: irq 0 gsi 0 vector 240 ioapic 0 pin 0 triggering 0 polarity 0 [ 0.000000] xen: registering gsi 1 triggering 1 polarity 0 [ 0.000000] xen: --> irq=1 [ 0.000000] xen_set_ioapic_routing: irq 1 gsi 1 vector 32 ioapic 0 pin 1 triggering 0 polarity 0 [ 0.000000] xen: registering gsi 3 triggering 1 polarity 0 [ 0.000000] xen: --> irq=3 [ 0.000000] xen_set_ioapic_routing: irq 3 gsi 3 vector 40 ioapic 0 pin 3 triggering 0 polarity 0 [ 0.000000] xen: registering gsi 4 triggering 1 polarity 0 [ 0.000000] xen: --> irq=4 [ 0.000000] xen_set_ioapic_routing: irq 4 gsi 4 vector 241 ioapic 0 pin 4 triggering 0 polarity 0 [ 0.000000] xen: registering gsi 5 triggering 1 polarity 0 [ 0.000000] xen: --> irq=5 [ 0.000000] xen_set_ioapic_routing: irq 5 gsi 5 vector 48 ioapic 0 pin 5 triggering 0 polarity 0 [ 0.000000] xen: registering gsi 6 triggering 1 polarity 0 [ 0.000000] xen: --> irq=6 [ 0.000000] xen_set_ioapic_routing: irq 6 gsi 6 vector 56 ioapic 0 pin 6 triggering 0 polarity 0 [ 0.000000] xen: registering gsi 7 triggering 1 polarity 0 [ 0.000000] xen: --> irq=7 [ 0.000000] xen_set_ioapic_routing: irq 7 gsi 7 vector 64 ioapic 0 pin 7 triggering 0 polarity 0 [ 0.000000] xen: registering gsi 8 triggering 1 polarity 0 [ 0.000000] xen: --> irq=8 [ 0.000000] xen_set_ioapic_routing: irq 8 gsi 8 vector 72 ioapic 0 pin 8 triggering 0 polarity 0 [ 0.000000] xen: registering gsi 9 triggering 0 polarity 0 [ 0.000000] xen: --> irq=9 [ 0.000000] xen_set_ioapic_routing: irq 9 gsi 9 vector 80 ioapic 0 pin 9 triggering 1 polarity 0 [ 0.000000] xen: registering gsi 10 triggering 1 polarity 0 [ 0.000000] xen: --> irq=10 [ 0.000000] xen_set_ioapic_routing: irq 10 gsi 10 vector 88 ioapic 0 pin 10 triggering 0 polarity 0 [ 0.000000] xen: registering gsi 11 triggering 1 polarity 0 [ 0.000000] xen: --> irq=11 [ 0.000000] xen_set_ioapic_routing: irq 11 gsi 11 vector 96 ioapic 0 pin 11 triggering 0 polarity 0 [ 0.000000] xen: registering gsi 12 triggering 1 polarity 0 [ 0.000000] xen: --> irq=12 [ 0.000000] xen_set_ioapic_routing: irq 12 gsi 12 vector 104 ioapic 0 pin 12 triggering 0 polarity 0 [ 0.000000] xen: registering gsi 13 triggering 1 polarity 0 [ 0.000000] xen: --> irq=13 [ 0.000000] xen_set_ioapic_routing: irq 13 gsi 13 vector 112 ioapic 0 pin 13 triggering 0 polarity 0 [ 0.000000] xen: registering gsi 14 triggering 1 polarity 0 [ 0.000000] xen: --> irq=14 [ 0.000000] xen_set_ioapic_routing: irq 14 gsi 14 vector 120 ioapic 0 pin 14 triggering 0 polarity 0 [ 0.000000] xen: registering gsi 15 triggering 1 polarity 0 [ 0.000000] xen: --> irq=15 [ 0.000000] xen_set_ioapic_routing: irq 15 gsi 15 vector 136 ioapic 0 pin 15 triggering 0 polarity 0 [ 0.000000] Detected 2500.002 MHz processor. [ 0.000999] Console: colour VGA+ 80x25 [ 0.000999] console handover: boot [xenboot0] -> real [tty1] [ 0.000999] console [hvc0] enabled [ 0.000999] Xen: using vcpuop timer interface [ 0.000999] installing Xen timer for CPU 0 [ 0.000999] alloc irq_desc for 423 on node 0 [ 0.000999] alloc kstat_irqs on node 0 [ 0.000999] xen: vcpu_time_info placement not supported [ 0.000999] Calibrating delay loop (skipped), value calculated using timer frequency.. 5000.00 BogoMIPS (lpj=2500002) [ 0.001037] Security Framework initialized [ 0.001999] SELinux: Initializing. [ 0.002009] SELinux: Starting in permissive mode [ 0.002018] Mount-cache hash table entries: 256 [ 0.003175] Initializing cgroup subsys ns [ 0.003999] Initializing cgroup subsys cpuacct [ 0.004004] Initializing cgroup subsys freezer [ 0.005020] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.006002] CPU: L2 Cache: 512K (64 bytes/line) [ 0.007002] tseg: 00aff00000 [ 0.007005] CPU: Physical Processor ID: 0 [ 0.007998] CPU: Processor Core ID: 0 [ 0.008003] mce: CPU supports 5 MCE banks [ 0.009032] Performance Counters: AMD PMU driver. [ 0.009998] ------------[ cut here ]------------ [ 0.009998] WARNING: at /usr/src/xen-unstable.hg/linux-2.6-pvops.git/arch/x86/xen/enlighten.c:720 xen_apic_write+0x15/0x17() [ 0.009998] Hardware name: System Product Name [ 0.009998] Modules linked in: [ 0.009998] Pid: 0, comm: swapper Not tainted 2.6.31.6 #1 [ 0.009998] Call Trace: [ 0.009998] [] ? xen_apic_write+0x15/0x17 [ 0.009998] [] warn_slowpath_common+0x77/0xa4 [ 0.009998] [] warn_slowpath_null+0xf/0x11 [ 0.009998] [] xen_apic_write+0x15/0x17 [ 0.009998] [] perf_counters_lapic_init+0x2e/0x30 [ 0.009998] [] init_hw_perf_counters+0x305/0x3a2 [ 0.009998] [] ? xen_restore_fl_direct_end+0x0/0x1 [ 0.009998] [] ? kmem_cache_alloc+0xcb/0x12d [ 0.009998] [] identify_boot_cpu+0x3c/0x3e [ 0.009998] [] check_bugs+0x9/0x2d [ 0.009998] [] start_kernel+0x41d/0x432 [ 0.009998] [] x86_64_start_reservations+0xaa/0xae [ 0.009998] [] xen_start_kernel+0x633/0x63a [ 0.009998] ---[ end trace 4eaa2a86a8e2da22 ]--- [ 0.009998] ... version: 0 [ 0.009998] ... bit width: 48 [ 0.009998] ... generic counters: 4 [ 0.009998] ... value mask: 0000ffffffffffff [ 0.009998] ... max period: 00007fffffffffff [ 0.009998] ... fixed-purpose counters: 0 [ 0.009998] ... counter mask: 000000000000000f [ 0.009998] SMP alternatives: switching to UP code [ 0.011998] ACPI: Core revision 20090521 [ 0.031098] alloc irq_desc for 422 on node 0 [ 0.031102] alloc kstat_irqs on node 0 [ 0.031112] alloc irq_desc for 421 on node 0 [ 0.031114] alloc kstat_irqs on node 0 [ 0.031120] alloc irq_desc for 420 on node 0 [ 0.031122] alloc kstat_irqs on node 0 [ 0.031127] alloc irq_desc for 419 on node 0 [ 0.031130] alloc kstat_irqs on node 0 [ 0.031306] installing Xen timer for CPU 1 [ 0.031514] alloc irq_desc for 418 on node 0 [ 0.031517] alloc kstat_irqs on node 0 [ 0.031551] SMP alternatives: switching to SMP code [ 0.031995] alloc irq_desc for 417 on node 0 [ 0.031995] alloc kstat_irqs on node 0 [ 0.032009] alloc irq_desc for 416 on node 0 [ 0.032012] alloc kstat_irqs on node 0 [ 0.032018] alloc irq_desc for 415 on node 0 [ 0.032020] alloc kstat_irqs on node 0 [ 0.032026] alloc irq_desc for 414 on node 0 [ 0.032028] alloc kstat_irqs on node 0 [ 0.000014] Initializing CPU#1 [ 0.000068] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.000071] CPU: L2 Cache: 512K (64 bytes/line) [ 0.000074] CPU: Physical Processor ID: 0 [ 0.000076] CPU: Processor Core ID: 1 [ 0.000078] mce: CPU supports 5 MCE banks [ 0.032171] Brought up 2 CPUs [ 0.033160] Booting paravirtualized kernel on Xen [ 0.033204] Xen version: 3.4.2 (preserve-AD) (dom0) [ 0.034021] Grant tables using version 1 layout. [ 0.034236] Grant table initialized [ 0.034498] Time: 9:34:32 Date: 12/14/09 [ 0.034790] NET: Registered protocol family 16 [ 0.035040] alloc irq_desc for 413 on node 0 [ 0.035040] alloc kstat_irqs on node 0 [ 0.035041] xenbus_probe_init ok [ 0.036013] node 0 link 0: io port [9000, ffff] [ 0.036020] TOM: 00000000c0000000 aka 3072M [ 0.036226] node 0 link 0: mmio [a0000, bffff] [ 0.036232] node 0 link 0: mmio [c0000000, efffffff] [ 0.036238] node 0 link 0: mmio [f4000000, fe02ffff] [ 0.036244] node 0 link 0: mmio [f0000000, f07fffff] [ 0.036248] TOM2: 0000000200000000 aka 8192M [ 0.036449] bus: [00,07] on node 0 link 0 [ 0.036452] bus: 00 index 0 io port: [0, ffff] [ 0.036455] bus: 00 index 1 mmio: [a0000, bffff] [ 0.036458] bus: 00 index 2 mmio: [c0000000, f3ffffff] [ 0.036461] bus: 00 index 3 mmio: [f4000000, ffffffff] [ 0.036463] bus: 00 index 4 mmio: [200000000, fcffffffff] [ 0.036480] ACPI: bus type pci registered [ 0.036696] PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - 63 [ 0.036994] PCI: MCFG area at f0000000 reserved in E820 [ 0.052794] PCI: Using MMCONFIG at f0000000 - f3ffffff [ 0.052991] PCI: Using configuration type 1 for base access [ 0.068111] bio: create slab at 0 [ 0.069353] ACPI: EC: Look up EC in DSDT [ 0.088361] ACPI: Interpreter enabled [ 0.088569] ACPI: (supports S0 S1 S3 S4 S5) [ 0.088960] ACPI: Using IOAPIC for interrupt routing [ 0.123426] ACPI: No dock devices found. [ 0.124094] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.124409] pci 0000:00:01.1: reg 10 io port: [0xff00-0xff3f] [ 0.124435] pci 0000:00:01.1: reg 20 io port: [0x1c00-0x1c3f] [ 0.124444] pci 0000:00:01.1: reg 24 io port: [0x1c40-0x1c7f] [ 0.124480] pci 0000:00:01.1: PME# supported from D3hot D3cold [ 0.124690] pci 0000:00:01.1: PME# disabled [ 0.125122] pci 0000:00:01.3: reg 10 32bit mmio: [0xfdf80000-0xfdffffff] [ 0.125343] pci 0000:00:02.0: reg 10 32bit mmio: [0xfe02f000-0xfe02ffff] [ 0.125400] pci 0000:00:02.0: supports D1 D2 [ 0.125403] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.125611] pci 0000:00:02.0: PME# disabled [ 0.125861] pci 0000:00:02.1: reg 10 32bit mmio: [0xfe02e000-0xfe02e0ff] [ 0.125928] pci 0000:00:02.1: supports D1 D2 [ 0.125931] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.125980] pci 0000:00:02.1: PME# disabled [ 0.126033] pci 0000:00:04.0: reg 10 32bit mmio: [0xfe02d000-0xfe02dfff] [ 0.126090] pci 0000:00:04.0: supports D1 D2 [ 0.126093] pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.126326] pci 0000:00:04.0: PME# disabled [ 0.126576] pci 0000:00:04.1: reg 10 32bit mmio: [0xfe02c000-0xfe02c0ff] [ 0.126643] pci 0000:00:04.1: supports D1 D2 [ 0.126646] pci 0000:00:04.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.126854] pci 0000:00:04.1: PME# disabled [ 0.127053] pci 0000:00:06.0: reg 20 io port: [0xfc00-0xfc0f] [ 0.127129] pci 0000:00:07.0: reg 10 32bit mmio: [0xfe020000-0xfe023fff] [ 0.127187] pci 0000:00:07.0: PME# supported from D3hot D3cold [ 0.127393] pci 0000:00:07.0: PME# disabled [ 0.128121] pci 0000:00:09.0: reg 10 io port: [0x9f0-0x9f7] [ 0.128130] pci 0000:00:09.0: reg 14 io port: [0xbf0-0xbf3] [ 0.128138] pci 0000:00:09.0: reg 18 io port: [0x970-0x977] [ 0.128146] pci 0000:00:09.0: reg 1c io port: [0xb70-0xb73] [ 0.128154] pci 0000:00:09.0: reg 20 io port: [0xf700-0xf70f] [ 0.128162] pci 0000:00:09.0: reg 24 32bit mmio: [0xfe026000-0xfe027fff] [ 0.128268] pci 0000:00:0a.0: reg 10 32bit mmio: [0xfe02b000-0xfe02bfff] [ 0.128276] pci 0000:00:0a.0: reg 14 io port: [0xf600-0xf607] [ 0.128285] pci 0000:00:0a.0: reg 18 32bit mmio: [0xfe02a000-0xfe02a0ff] [ 0.128293] pci 0000:00:0a.0: reg 1c 32bit mmio: [0xfe029000-0xfe02900f] [ 0.128344] pci 0000:00:0a.0: supports D1 D2 [ 0.128347] pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.128980] pci 0000:00:0a.0: PME# disabled [ 0.129066] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.129980] pci 0000:00:0b.0: PME# disabled [ 0.130253] pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.130980] pci 0000:00:10.0: PME# disabled [ 0.131248] pci 0000:00:12.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.131979] pci 0000:00:12.0: PME# disabled [ 0.132244] pci 0000:00:13.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.132979] pci 0000:00:13.0: PME# disabled [ 0.133245] pci 0000:00:14.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.133979] pci 0000:00:14.0: PME# disabled [ 0.134320] pci 0000:01:08.0: reg 20 io port: [0xec00-0xec1f] [ 0.134361] pci 0000:01:08.0: supports D1 D2 [ 0.134364] pci 0000:01:08.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.134979] pci 0000:01:08.0: PME# disabled [ 0.135049] pci 0000:01:08.1: reg 20 io port: [0xe800-0xe81f] [ 0.135090] pci 0000:01:08.1: supports D1 D2 [ 0.135093] pci 0000:01:08.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.135979] pci 0000:01:08.1: PME# disabled [ 0.136022] pci 0000:01:08.2: reg 10 32bit mmio: [0xfdeff000-0xfdeff0ff] [ 0.136090] pci 0000:01:08.2: supports D1 D2 [ 0.136093] pci 0000:01:08.2: PME# supported from D0 D1 D2 D3hot D3cold [ 0.136979] pci 0000:01:08.2: PME# disabled [ 0.137034] pci 0000:01:0a.0: reg 10 32bit mmio: [0xfdefe000-0xfdefefff] [ 0.137102] pci 0000:01:0a.0: supports D1 D2 [ 0.137105] pci 0000:01:0a.0: PME# supported from D0 D1 D2 D3hot [ 0.137978] pci 0000:01:0a.0: PME# disabled [ 0.138025] pci 0000:00:08.0: transparent bridge [ 0.138978] pci 0000:00:08.0: bridge io port: [0xe000-0xefff] [ 0.138978] pci 0000:00:08.0: bridge 32bit mmio: [0xfde00000-0xfdefffff] [ 0.138978] pci 0000:00:08.0: bridge 32bit mmio pref: [0xfdd00000-0xfddfffff] [ 0.139023] pci 0000:02:00.0: reg 10 32bit mmio: [0xfb000000-0xfbffffff] [ 0.139036] pci 0000:02:00.0: reg 14 64bit mmio: [0xd8000000-0xdfffffff] [ 0.139049] pci 0000:02:00.0: reg 1c 64bit mmio: [0xe6000000-0xe7ffffff] [ 0.139057] pci 0000:02:00.0: reg 24 io port: [0xdc00-0xdc7f] [ 0.139065] pci 0000:02:00.0: reg 30 32bit mmio: [0x000000-0x01ffff] [ 0.139151] pci 0000:00:0b.0: bridge io port: [0xd000-0xdfff] [ 0.139157] pci 0000:00:0b.0: bridge 32bit mmio: [0xfb000000-0xfcffffff] [ 0.139165] pci 0000:00:0b.0: bridge 64bit mmio pref: [0xd8000000-0xe7ffffff] [ 0.139262] pci 0000:00:10.0: bridge io port: [0xc000-0xcfff] [ 0.139272] pci 0000:00:10.0: bridge 32bit mmio: [0xfdc00000-0xfdcfffff] [ 0.139290] pci 0000:00:10.0: bridge 64bit mmio pref: [0xfdb00000-0xfdbfffff] [ 0.139388] pci 0000:00:12.0: bridge io port: [0xb000-0xbfff] [ 0.139399] pci 0000:00:12.0: bridge 32bit mmio: [0xfda00000-0xfdafffff] [ 0.139416] pci 0000:00:12.0: bridge 64bit mmio pref: [0xfd900000-0xfd9fffff] [ 0.139564] pci 0000:05:00.0: supports D1 D2 [ 0.139666] pci 0000:00:13.0: bridge io port: [0xa000-0xafff] [ 0.139676] pci 0000:00:13.0: bridge 32bit mmio: [0xfd800000-0xfd8fffff] [ 0.139694] pci 0000:00:13.0: bridge 64bit mmio pref: [0xfd700000-0xfd7fffff] [ 0.139762] pci 0000:06:01.0: reg 10 32bit mmio: [0xfd8ff000-0xfd8fffff] [ 0.139855] pci 0000:06:01.0: supports D1 D2 [ 0.139858] pci 0000:06:01.0: PME# supported from D0 D1 D2 D3hot [ 0.139978] pci 0000:06:01.0: PME# disabled [ 0.140036] pci 0000:06:01.1: reg 10 32bit mmio: [0xfd8fe000-0xfd8fefff] [ 0.140130] pci 0000:06:01.1: supports D1 D2 [ 0.140133] pci 0000:06:01.1: PME# supported from D0 D1 D2 D3hot [ 0.140978] pci 0000:06:01.1: PME# disabled [ 0.141036] pci 0000:06:01.2: reg 10 32bit mmio: [0xfd8fd000-0xfd8fd0ff] [ 0.141130] pci 0000:06:01.2: supports D1 D2 [ 0.141132] pci 0000:06:01.2: PME# supported from D0 D1 D2 D3hot [ 0.141978] pci 0000:06:01.2: PME# disabled [ 0.142084] pci 0000:05:00.0: bridge io port: [0xa000-0xafff] [ 0.142091] pci 0000:05:00.0: bridge 32bit mmio: [0xfd800000-0xfd8fffff] [ 0.142103] pci 0000:05:00.0: bridge 64bit mmio pref: [0xfd700000-0xfd7fffff] [ 0.142203] pci 0000:07:00.0: reg 10 32bit mmio: [0xfd6e0000-0xfd6fffff] [ 0.142217] pci 0000:07:00.0: reg 14 32bit mmio: [0xfd6c0000-0xfd6dffff] [ 0.142231] pci 0000:07:00.0: reg 18 io port: [0x9c00-0x9c1f] [ 0.142276] pci 0000:07:00.0: reg 30 32bit mmio: [0xfd6a0000-0xfd6bffff] [ 0.142336] pci 0000:07:00.0: PME# supported from D0 D3hot D3cold [ 0.142978] pci 0000:07:00.0: PME# disabled [ 0.143071] pci 0000:00:14.0: bridge io port: [0x9000-0x9fff] [ 0.143081] pci 0000:00:14.0: bridge 32bit mmio: [0xfd600000-0xfd6fffff] [ 0.143099] pci 0000:00:14.0: bridge 64bit mmio pref: [0xfd500000-0xfd5fffff] [ 0.143174] pci_bus 0000:00: on NUMA node 0 [ 0.143182] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.143865] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT] [ 0.338164] ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.338951] ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.338951] ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.338951] ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 9 *10 11 14 15) [ 0.338951] ACPI: PCI Interrupt Link [LE0A] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.338951] ACPI: PCI Interrupt Link [LE0B] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.338951] ACPI: PCI Interrupt Link [LE0C] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.338951] ACPI: PCI Interrupt Link [LE0D] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.338951] ACPI: PCI Interrupt Link [LE1A] (IRQs 5 7 9 *10 11 14 15) [ 0.338951] ACPI: PCI Interrupt Link [LE1B] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.338951] ACPI: PCI Interrupt Link [LE1C] (IRQs 5 *7 9 10 11 14 15) [ 0.338951] ACPI: PCI Interrupt Link [LE1D] (IRQs *5 7 9 10 11 14 15) [ 0.338951] ACPI: PCI Interrupt Link [LE2A] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.338951] ACPI: PCI Interrupt Link [LE2B] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.338951] ACPI: PCI Interrupt Link [LE2C] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.338951] ACPI: PCI Interrupt Link [LE2D] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.339139] ACPI: PCI Interrupt Link [LE3A] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.340042] ACPI: PCI Interrupt Link [LE3B] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.340951] ACPI: PCI Interrupt Link [LE3C] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.340951] ACPI: PCI Interrupt Link [LE3D] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.340951] ACPI: PCI Interrupt Link [LE4A] (IRQs 5 7 9 *10 11 14 15) [ 0.341056] ACPI: PCI Interrupt Link [LE4B] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.341951] ACPI: PCI Interrupt Link [LE4C] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.341951] ACPI: PCI Interrupt Link [LE4D] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.341951] ACPI: PCI Interrupt Link [LE5A] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.341951] ACPI: PCI Interrupt Link [LE5B] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.341951] ACPI: PCI Interrupt Link [LE5C] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.341951] ACPI: PCI Interrupt Link [LE5D] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.341951] ACPI: PCI Interrupt Link [LE6A] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.341951] ACPI: PCI Interrupt Link [LE6B] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.341951] ACPI: PCI Interrupt Link [LE6C] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.341951] ACPI: PCI Interrupt Link [LE6D] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.341951] ACPI: PCI Interrupt Link [LE7A] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.341951] ACPI: PCI Interrupt Link [LE7B] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.341951] ACPI: PCI Interrupt Link [LE7C] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.341951] ACPI: PCI Interrupt Link [LE7D] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.341951] ACPI: PCI Interrupt Link [LP2P] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.341951] ACPI: PCI Interrupt Link [LIGP] (IRQs 5 *7 9 10 11 14 15) [ 0.341951] ACPI: PCI Interrupt Link [LUBA] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.341951] ACPI: PCI Interrupt Link [LUB2] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.341951] ACPI: PCI Interrupt Link [LU1B] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.341951] ACPI: PCI Interrupt Link [LU2B] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.342058] ACPI: PCI Interrupt Link [LMAC] (IRQs 5 7 9 10 11 14 *15) [ 0.342951] ACPI: PCI Interrupt Link [LAZA] (IRQs 5 7 9 10 *11 14 15) [ 0.342951] ACPI: PCI Interrupt Link [LPMU] (IRQs 5 7 9 10 *11 14 15) [ 0.342951] ACPI: PCI Interrupt Link [LSMB] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.342951] ACPI: PCI Interrupt Link [LIDE] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.342951] ACPI: PCI Interrupt Link [LSID] (IRQs 5 7 9 10 *11 14 15) [ 0.342951] ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled. [ 0.342951] ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled. [ 0.342951] ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0, disabled. [ 0.342951] ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0 [ 0.342951] ACPI: PCI Interrupt Link [AE0A] (IRQs 16) *0, disabled. [ 0.342951] ACPI: PCI Interrupt Link [AE0B] (IRQs 16) *0, disabled. [ 0.342951] ACPI: PCI Interrupt Link [AE0C] (IRQs 16) *0, disabled. [ 0.342951] ACPI: PCI Interrupt Link [AE0D] (IRQs 16) *0, disabled. [ 0.342951] ACPI: PCI Interrupt Link [AE1A] (IRQs 16) *0 [ 0.342951] ACPI: PCI Interrupt Link [AE1B] (IRQs 16) *0, disabled. [ 0.342951] ACPI: PCI Interrupt Link [AE1C] (IRQs 16) *0 [ 0.342951] ACPI: PCI Interrupt Link [AE1D] (IRQs 16) *0 [ 0.342951] ACPI: PCI Interrupt Link [AE2A] (IRQs 16) *0, disabled. [ 0.342951] ACPI: PCI Interrupt Link [AE2B] (IRQs 16) *0, disabled. [ 0.342951] ACPI: PCI Interrupt Link [AE2C] (IRQs 16) *0, disabled. [ 0.342951] ACPI: PCI Interrupt Link [AE2D] (IRQs 16) *0, disabled. [ 0.342951] ACPI: PCI Interrupt Link [AE3A] (IRQs 16) *0, disabled. [ 0.342951] ACPI: PCI Interrupt Link [AE3B] (IRQs 16) *0, disabled. [ 0.342951] ACPI: PCI Interrupt Link [AE3C] (IRQs 16) *0, disabled. [ 0.343123] ACPI: PCI Interrupt Link [AE3D] (IRQs 16) *0, disabled. [ 0.343951] ACPI: PCI Interrupt Link [AE4A] (IRQs 16) *0 [ 0.343951] ACPI: PCI Interrupt Link [AE4B] (IRQs 16) *0, disabled. [ 0.343951] ACPI: PCI Interrupt Link [AE4C] (IRQs 16) *0, disabled. [ 0.343951] ACPI: PCI Interrupt Link [AE4D] (IRQs 16) *0, disabled. [ 0.343951] ACPI: PCI Interrupt Link [AE5A] (IRQs 16) *0, disabled. [ 0.343951] ACPI: PCI Interrupt Link [AE5B] (IRQs 16) *0, disabled. [ 0.343951] ACPI: PCI Interrupt Link [AE5C] (IRQs 16) *0, disabled. [ 0.343951] ACPI: PCI Interrupt Link [AE5D] (IRQs 16) *0, disabled. [ 0.343951] ACPI: PCI Interrupt Link [AE6A] (IRQs 16) *0, disabled. [ 0.343951] ACPI: PCI Interrupt Link [AE6B] (IRQs 16) *0, disabled. [ 0.343951] ACPI: PCI Interrupt Link [AE6C] (IRQs 16) *0, disabled. [ 0.343951] ACPI: PCI Interrupt Link [AE6D] (IRQs 16) *0, disabled. [ 0.343951] ACPI: PCI Interrupt Link [AE7A] (IRQs 16) *0, disabled. [ 0.343951] ACPI: PCI Interrupt Link [AE7B] (IRQs 16) *0, disabled. [ 0.343951] ACPI: PCI Interrupt Link [AE7C] (IRQs 16) *0, disabled. [ 0.343951] ACPI: PCI Interrupt Link [AE7D] (IRQs 16) *0, disabled. [ 0.343951] ACPI: PCI Interrupt Link [AIGP] (IRQs 20 21 22 23) *0 [ 0.344128] ACPI: PCI Interrupt Link [AUBA] (IRQs 20 21 22 23) *0, disabled. [ 0.344951] ACPI: PCI Interrupt Link [AUB2] (IRQs 20 21 22 23) *0, disabled. [ 0.344951] ACPI: PCI Interrupt Link [AU1B] (IRQs 20 21 22 23) *0, disabled. [ 0.344951] ACPI: PCI Interrupt Link [AU2B] (IRQs 20 21 22 23) *0, disabled. [ 0.344951] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0 [ 0.344951] ACPI: PCI Interrupt Link [APMU] (IRQs 20 21 22 23) *0 [ 0.344951] ACPI: PCI Interrupt Link [AAZA] (IRQs 20 21 22 23) *0 [ 0.345121] ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0, disabled. [ 0.345951] ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22 23) *0, disabled. [ 0.345951] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled. [ 0.345951] ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0 [ 0.345993] sync cpu 0 get result ffffffff max_id 0 [ 0.345993] Failed to sync pcpu 0 [ 0.346989] xenbus_probe_backend_init bus registered ok [ 0.347990] xenbus_probe_frontend_init bus registered ok [ 0.348951] xen_balloon: Initialising balloon driver with page order 0. [ 0.349070] SCSI subsystem initialized [ 0.349993] libata version 3.00 loaded. [ 0.349994] usbcore: registered new interface driver usbfs [ 0.350990] usbcore: registered new interface driver hub [ 0.351985] usbcore: registered new device driver usb [ 0.352996] PCI: Using ACPI for IRQ routing [ 0.353951] IO APIC resources couldn't be allocated. [ 0.387993] cfg80211: Using static regulatory domain info [ 0.388218] cfg80211: Regulatory domain: US [ 0.388419] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 0.388787] (2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm) [ 0.388951] (5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) [ 0.388951] (5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) [ 0.388951] (5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) [ 0.388951] (5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) [ 0.388951] (5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm) [ 0.388963] cfg80211: Calling CRDA for country: US [ 0.389991] NetLabel: Initializing [ 0.390951] NetLabel: domain hash size = 128 [ 0.390951] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.390951] NetLabel: unlabeled traffic allowed by default [ 0.391961] Switched to high resolution mode on CPU 0 [ 0.395443] Switched to high resolution mode on CPU 1 [ 0.398021] pnp: PnP ACPI init [ 0.398245] ACPI: bus type pnp registered [ 0.400173] xen: registering gsi 8 triggering 1 polarity 0 [ 0.400176] xen_allocate_pirq: returning irq 8 for gsi 8 [ 0.401004] xen: --> irq=8 [ 0.401004] xen_set_ioapic_routing: irq 8 gsi 8 vector 72 ioapic 0 pin 8 triggering 0 polarity 0 [ 0.413466] xen: registering gsi 13 triggering 1 polarity 0 [ 0.413469] xen_allocate_pirq: returning irq 13 for gsi 13 [ 0.414442] xen: --> irq=13 [ 0.414442] xen_set_ioapic_routing: irq 13 gsi 13 vector 112 ioapic 0 pin 13 triggering 0 polarity 0 [ 0.428974] xen: registering gsi 6 triggering 1 polarity 0 [ 0.428977] xen_allocate_pirq: returning irq 6 for gsi 6 [ 0.429423] xen: --> irq=6 [ 0.429423] xen_set_ioapic_routing: irq 6 gsi 6 vector 56 ioapic 0 pin 6 triggering 0 polarity 0 [ 0.442991] xen: registering gsi 4 triggering 1 polarity 0 [ 0.442995] xen_allocate_pirq: returning irq 4 for gsi 4 [ 0.443316] xen: --> irq=4 [ 0.443316] xen_set_ioapic_routing: irq 4 gsi 4 vector 241 ioapic 0 pin 4 triggering 0 polarity 0 [ 0.464440] pnp: PnP ACPI: found 12 devices [ 0.464643] ACPI: ACPI bus type pnp unregistered [ 0.465421] system 00:01: ioport range 0x1000-0x107f has been reserved [ 0.465421] system 00:01: ioport range 0x1080-0x10ff has been reserved [ 0.465421] system 00:01: ioport range 0x1400-0x147f has been reserved [ 0.465421] system 00:01: ioport range 0x1480-0x14ff has been reserved [ 0.465421] system 00:01: ioport range 0x1800-0x187f has been reserved [ 0.465421] system 00:01: ioport range 0x1880-0x18ff has been reserved [ 0.465421] system 00:01: iomem range 0xfefe1000-0xfefe10ff has been reserved [ 0.465421] system 00:01: iomem range 0xb0000000-0xbfffffff has been reserved [ 0.465421] system 00:02: ioport range 0x4d0-0x4d1 has been reserved [ 0.465421] system 00:02: ioport range 0x800-0x87f has been reserved [ 0.465421] system 00:02: ioport range 0x290-0x297 has been reserved [ 0.465421] system 00:0a: iomem range 0xf0000000-0xf3ffffff has been reserved [ 0.465421] system 00:0b: iomem range 0xcd600-0xcffff could not be reserved [ 0.465421] system 00:0b: iomem range 0xf0000-0xf7fff could not be reserved [ 0.465421] system 00:0b: iomem range 0xf8000-0xfbfff could not be reserved [ 0.465421] system 00:0b: iomem range 0xfc000-0xfffff could not be reserved [ 0.465421] system 00:0b: iomem range 0xfeff0000-0xfeff00ff has been reserved [ 0.465421] system 00:0b: iomem range 0xafee0000-0xafefffff could not be reserved [ 0.465421] system 00:0b: iomem range 0xffff0000-0xffffffff has been reserved [ 0.465421] system 00:0b: iomem range 0x0-0x9ffff could not be reserved [ 0.465421] system 00:0b: iomem range 0x100000-0xafedffff could not be reserved [ 0.465421] system 00:0b: iomem range 0xafff0000-0xbffeffff could not be reserved [ 0.465421] system 00:0b: iomem range 0xfec00000-0xfec00fff has been reserved [ 0.465421] system 00:0b: iomem range 0xfee00000-0xfeefffff has been reserved [ 0.465421] system 00:0b: iomem range 0xfefff000-0xfeffffff has been reserved [ 0.465421] system 00:0b: iomem range 0xfff80000-0xfff80fff has been reserved [ 0.465421] system 00:0b: iomem range 0xfff90000-0xfffbffff has been reserved [ 0.465421] system 00:0b: iomem range 0xfffed000-0xfffeffff has been reserved [ 0.661357] pciback 0000:00:00.0: probing... [ 0.661368] pciback 0000:00:01.0: probing... [ 0.661376] pciback 0000:00:01.1: probing... [ 0.661385] pciback 0000:00:01.2: probing... [ 0.661393] pciback 0000:00:01.3: probing... [ 0.661401] pciback 0000:00:01.4: probing... [ 0.661410] pciback 0000:00:02.0: probing... [ 0.661418] pciback 0000:00:02.1: probing... [ 0.661427] pciback 0000:00:04.0: probing... [ 0.661435] pciback 0000:00:04.1: probing... [ 0.661444] pciback 0000:00:06.0: probing... [ 0.661452] pciback 0000:00:07.0: probing... [ 0.661461] pciback 0000:00:08.0: probing... [ 0.661470] pciback 0000:00:09.0: probing... [ 0.661478] pciback 0000:00:0a.0: probing... [ 0.661487] pciback 0000:00:0b.0: probing... [ 0.661495] pciback 0000:00:10.0: probing... [ 0.661504] pciback 0000:00:12.0: probing... [ 0.661513] pciback 0000:00:13.0: probing... [ 0.661521] pciback 0000:00:14.0: probing... [ 0.661530] pciback 0000:00:18.0: probing... [ 0.661538] pciback 0000:00:18.1: probing... [ 0.661547] pciback 0000:00:18.2: probing... [ 0.661555] pciback 0000:00:18.3: probing... [ 0.661563] pciback 0000:01:08.0: probing... [ 0.661571] pciback 0000:01:08.1: probing... [ 0.661579] pciback 0000:01:08.2: probing... [ 0.661588] pciback 0000:01:0a.0: probing... [ 0.661596] pciback 0000:02:00.0: probing... [ 0.661604] pciback 0000:05:00.0: probing... [ 0.661612] pciback 0000:06:01.0: probing... [ 0.661620] pciback 0000:06:01.1: probing... [ 0.661629] pciback 0000:06:01.2: probing... [ 0.661637] pciback 0000:07:00.0: probing... [ 0.667344] pci 0000:00:08.0: PCI bridge, secondary bus 0000:01 [ 0.667551] pci 0000:00:08.0: IO window: 0xe000-0xefff [ 0.668001] pci 0000:00:08.0: MEM window: 0xfde00000-0xfdefffff [ 0.668001] pci 0000:00:08.0: PREFETCH window: 0xfdd00000-0xfddfffff [ 0.668001] pci 0000:00:0b.0: PCI bridge, secondary bus 0000:02 [ 0.668001] pci 0000:00:0b.0: IO window: 0xd000-0xdfff [ 0.668001] pci 0000:00:0b.0: MEM window: 0xfb000000-0xfcffffff [ 0.668001] pci 0000:00:0b.0: PREFETCH window: 0x000000d8000000-0x000000e7ffffff [ 0.668001] pci 0000:00:10.0: PCI bridge, secondary bus 0000:03 [ 0.668001] pci 0000:00:10.0: IO window: 0xc000-0xcfff [ 0.668001] pci 0000:00:10.0: MEM window: 0xfdc00000-0xfdcfffff [ 0.668001] pci 0000:00:10.0: PREFETCH window: 0x000000fdb00000-0x000000fdbfffff [ 0.668001] pci 0000:00:12.0: PCI bridge, secondary bus 0000:04 [ 0.668001] pci 0000:00:12.0: IO window: 0xb000-0xbfff [ 0.668001] pci 0000:00:12.0: MEM window: 0xfda00000-0xfdafffff [ 0.668001] pci 0000:00:12.0: PREFETCH window: 0x000000fd900000-0x000000fd9fffff [ 0.668001] pci 0000:05:00.0: PCI bridge, secondary bus 0000:06 [ 0.668001] pci 0000:05:00.0: IO window: 0xa000-0xafff [ 0.668001] pci 0000:05:00.0: MEM window: 0xfd800000-0xfd8fffff [ 0.668001] pci 0000:05:00.0: PREFETCH window: 0x000000fd700000-0x000000fd7fffff [ 0.668001] pci 0000:00:13.0: PCI bridge, secondary bus 0000:05 [ 0.668001] pci 0000:00:13.0: IO window: 0xa000-0xafff [ 0.668001] pci 0000:00:13.0: MEM window: 0xfd800000-0xfd8fffff [ 0.668001] pci 0000:00:13.0: PREFETCH window: 0x000000fd700000-0x000000fd7fffff [ 0.668001] pci 0000:00:14.0: PCI bridge, secondary bus 0000:07 [ 0.668001] pci 0000:00:14.0: IO window: 0x9000-0x9fff [ 0.668001] pci 0000:00:14.0: MEM window: 0xfd600000-0xfd6fffff [ 0.668001] pci 0000:00:14.0: PREFETCH window: 0x000000fd500000-0x000000fd5fffff [ 0.668001] pci 0000:00:08.0: setting latency timer to 64 [ 0.668001] pci 0000:00:0b.0: setting latency timer to 64 [ 0.836565] ACPI: PCI Interrupt Link [AE0A] enabled at IRQ 16 [ 0.837063] xen: registering gsi 16 triggering 0 polarity 1 [ 0.837063] alloc irq_desc for 16 on node 0 [ 0.837063] alloc kstat_irqs on node 0 [ 0.841576] xen: --> irq=16 [ 0.841580] xen_set_ioapic_routing: irq 16 gsi 16 vector 144 ioapic 0 pin 16 triggering 1 polarity 1 [ 0.842571] pci 0000:00:10.0: PCI INT A -> Link[AE0A] -> GSI 16 (level, low) -> IRQ 16 [ 0.842571] pci 0000:00:10.0: setting latency timer to 64 [ 0.842571] ACPI: PCI Interrupt Link [AE2A] enabled at IRQ 16 [ 0.842571] xen: registering gsi 16 triggering 0 polarity 1 [ 0.842571] xen_allocate_pirq: returning irq 16 for gsi 16 [ 0.842571] xen: --> irq=16 [ 0.842571] xen_set_ioapic_routing: irq 16 gsi 16 vector 144 ioapic 0 pin 16 triggering 1 polarity 1 [ 0.842571] pci 0000:00:12.0: PCI INT A -> Link[AE2A] -> GSI 16 (level, low) -> IRQ 16 [ 0.842571] pci 0000:00:12.0: setting latency timer to 64 [ 0.842571] ACPI: PCI Interrupt Link [AE3A] enabled at IRQ 16 [ 0.842571] xen: registering gsi 16 triggering 0 polarity 1 [ 0.842571] xen_allocate_pirq: returning irq 16 for gsi 16 [ 0.842571] xen: --> irq=16 [ 0.842571] xen_set_ioapic_routing: irq 16 gsi 16 vector 144 ioapic 0 pin 16 triggering 1 polarity 1 [ 0.842571] pci 0000:00:13.0: PCI INT A -> Link[AE3A] -> GSI 16 (level, low) -> IRQ 16 [ 0.842571] pci 0000:00:13.0: setting latency timer to 64 [ 0.842571] pci 0000:05:00.0: setting latency timer to 64 [ 0.842571] ACPI: PCI Interrupt Link [AE4A] enabled at IRQ 16 [ 0.842571] xen: registering gsi 16 triggering 0 polarity 1 [ 0.842571] xen_allocate_pirq: returning irq 16 for gsi 16 [ 0.842571] xen: --> irq=16 [ 0.842571] xen_set_ioapic_routing: irq 16 gsi 16 vector 144 ioapic 0 pin 16 triggering 1 polarity 1 [ 0.842571] pci 0000:00:14.0: PCI INT A -> Link[AE4A] -> GSI 16 (level, low) -> IRQ 16 [ 0.842571] pci 0000:00:14.0: setting latency timer to 64 [ 0.842571] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.842571] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff] [ 0.842571] pci_bus 0000:01: resource 0 io: [0xe000-0xefff] [ 0.842571] pci_bus 0000:01: resource 1 mem: [0xfde00000-0xfdefffff] [ 0.842571] pci_bus 0000:01: resource 2 pref mem [0xfdd00000-0xfddfffff] [ 0.842571] pci_bus 0000:01: resource 3 io: [0x00-0xffff] [ 0.842571] pci_bus 0000:01: resource 4 mem: [0x000000-0xffffffffffffffff] [ 0.842571] pci_bus 0000:02: resource 0 io: [0xd000-0xdfff] [ 0.842571] pci_bus 0000:02: resource 1 mem: [0xfb000000-0xfcffffff] [ 0.842571] pci_bus 0000:02: resource 2 pref mem [0xd8000000-0xe7ffffff] [ 0.842571] pci_bus 0000:03: resource 0 io: [0xc000-0xcfff] [ 0.842571] pci_bus 0000:03: resource 1 mem: [0xfdc00000-0xfdcfffff] [ 0.842571] pci_bus 0000:03: resource 2 pref mem [0xfdb00000-0xfdbfffff] [ 0.842571] pci_bus 0000:04: resource 0 io: [0xb000-0xbfff] [ 0.842571] pci_bus 0000:04: resource 1 mem: [0xfda00000-0xfdafffff] [ 0.842571] pci_bus 0000:04: resource 2 pref mem [0xfd900000-0xfd9fffff] [ 0.842571] pci_bus 0000:05: resource 0 io: [0xa000-0xafff] [ 0.842571] pci_bus 0000:05: resource 1 mem: [0xfd800000-0xfd8fffff] [ 0.842571] pci_bus 0000:05: resource 2 pref mem [0xfd700000-0xfd7fffff] [ 0.842571] pci_bus 0000:06: resource 0 io: [0xa000-0xafff] [ 0.842571] pci_bus 0000:06: resource 1 mem: [0xfd800000-0xfd8fffff] [ 0.842571] pci_bus 0000:06: resource 2 pref mem [0xfd700000-0xfd7fffff] [ 0.842571] pci_bus 0000:07: resource 0 io: [0x9000-0x9fff] [ 0.842571] pci_bus 0000:07: resource 1 mem: [0xfd600000-0xfd6fffff] [ 0.842571] pci_bus 0000:07: resource 2 pref mem [0xfd500000-0xfd5fffff] [ 0.944304] NET: Registered protocol family 2 [ 0.948406] IP route cache hash table entries: 32768 (order: 6, 262144 bytes) [ 0.957023] TCP established hash table entries: 131072 (order: 9, 2097152 bytes) [ 0.958002] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.958002] TCP: Hash tables configured (established 131072 bind 65536) [ 0.958002] TCP reno registered [ 0.980364] NET: Registered protocol family 1 [ 0.984461] Trying to unpack rootfs image as initramfs... [ 0.996455] Freeing initrd memory: 5928k freed [ 1.000155] kvm: no hardware support [ 1.000365] has_svm: svm not available [ 1.001009] kvm: no hardware support [ 1.007166] Microcode Update Driver: v2.00 , Peter Oruba [ 1.008003] Scanning for low memory corruption every 60 seconds [ 1.020286] audit: initializing netlink socket (disabled) [ 1.023253] type=2000 audit(1260783273.421:1): initialized [ 1.036538] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 1.041451] VFS: Disk quotas dquot_6.5.2 [ 1.041779] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 1.048345] msgmni has been set to 1354 [ 1.051169] SELinux: Registering netfilter hooks [ 1.051847] alg: No test for stdrng (krng) [ 1.053938] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) [ 1.054899] io scheduler noop registered [ 1.054899] io scheduler anticipatory registered [ 1.054899] io scheduler deadline registered [ 1.075965] io scheduler cfq registered (default) [ 1.118126] pci 0000:00:08.0: Enabling HT MSI Mapping [ 1.120690] pci 0000:00:09.0: Enabling HT MSI Mapping [ 1.124855] pci 0000:00:0a.0: Enabling HT MSI Mapping [ 1.130410] pci 0000:00:0b.0: Enabling HT MSI Mapping [ 1.131242] pci 0000:01:08.0: uhci_check_and_reset_hc: legsup = 0x2000 [ 1.131242] pci 0000:01:08.0: Performing full reset [ 1.136067] pci 0000:01:08.1: uhci_check_and_reset_hc: legsup = 0x2000 [ 1.136070] pci 0000:01:08.1: Performing full reset [ 1.136114] pci 0000:02:00.0: Boot video device [ 1.136676] alloc irq_desc for 412 on node 0 [ 1.136679] alloc kstat_irqs on node 0 [ 1.136771] pcieport-driver 0000:00:10.0: setting latency timer to 64 [ 1.137331] alloc irq_desc for 411 on node 0 [ 1.137334] alloc kstat_irqs on node 0 [ 1.137419] pcieport-driver 0000:00:12.0: setting latency timer to 64 [ 1.137953] alloc irq_desc for 410 on node 0 [ 1.137956] alloc kstat_irqs on node 0 [ 1.138047] pcieport-driver 0000:00:13.0: setting latency timer to 64 [ 1.138584] alloc irq_desc for 409 on node 0 [ 1.138586] alloc kstat_irqs on node 0 [ 1.138671] pcieport-driver 0000:00:14.0: setting latency timer to 64 [ 1.139106] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 1.140483] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 [ 1.141475] ACPI: Power Button [PWRF] [ 1.152536] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1 [ 1.153529] ACPI: Power Button [PWRB] [ 1.163679] fan PNP0C0B:00: registered as cooling_device0 [ 1.164670] ACPI: Fan [FAN] (on) [ 1.185742] ACPI Warning: \_TZ_.THRM._PSL: Return Package type mismatch at index 0 - found [NULL Object Descriptor], expected Reference 20090521 nspredef-946 [ 1.186002] ACPI: Expecting a [Reference] package element, found type 0 [ 1.186002] ACPI: Invalid passive threshold [ 1.197348] thermal LNXTHERM:01: registered as thermal_zone0 [ 1.198038] ACPI: Thermal Zone [THRM] (40 C) [ 1.209540] Event-channel device installed. [ 1.217496] blktap_device_init: blktap device major 253 [ 1.217740] blktap_ring_init: blktap ring major: 251 [ 1.224256] registering netback [ 1.225995] pciback: pcistub_init_devices_late [ 1.232172] alloc irq_desc for 408 on node 0 [ 1.232176] alloc kstat_irqs on node 0 [ 1.233152] hpet_acpi_add: no address or irqs in _CRS [ 1.233539] Non-volatile memory driver v1.3 [ 1.234281] Linux agpgart interface v0.103 [ 1.238515] [drm] Initialized drm 1.1.0 20060810 [ 1.239494] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.255110] brd: module loaded [ 1.256867] loop: module loaded [ 1.257252] input: Macintosh mouse button emulation as /devices/virtual/input/input2 [ 1.265208] ahci 0000:00:09.0: version 3.0 [ 1.265760] ACPI: PCI Interrupt Link [APSI] enabled at IRQ 23 [ 1.266130] xen: registering gsi 23 triggering 0 polarity 1 [ 1.266130] alloc irq_desc for 23 on node 0 [ 1.266130] alloc kstat_irqs on node 0 [ 1.270286] xen: --> irq=23 [ 1.270290] xen_set_ioapic_routing: irq 23 gsi 23 vector 184 ioapic 0 pin 23 triggering 1 polarity 1 [ 1.271271] ahci 0000:00:09.0: PCI INT A -> Link[APSI] -> GSI 23 (level, low) -> IRQ 23 [ 1.271271] alloc irq_desc for 407 on node 0 [ 1.271271] alloc kstat_irqs on node 0 [ 1.287052] ahci 0000:00:09.0: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl IDE mode [ 1.287968] ahci 0000:00:09.0: flags: 64bit ncq sntf led clo pmp pio [ 1.287968] ahci 0000:00:09.0: setting latency timer to 64 [ 1.303286] scsi0 : ahci [ 1.305227] scsi1 : ahci [ 1.306524] scsi2 : ahci [ 1.309287] scsi3 : ahci [ 1.312054] scsi4 : ahci [ 1.314811] scsi5 : ahci [ 1.317791] ata1: SATA max UDMA/133 abar m8192@0xfe026000 port 0xfe026100 irq 407 [ 1.318541] ata2: SATA max UDMA/133 abar m8192@0xfe026000 port 0xfe026180 irq 407 [ 1.318541] ata3: SATA max UDMA/133 abar m8192@0xfe026000 port 0xfe026200 irq 407 [ 1.318541] ata4: SATA max UDMA/133 abar m8192@0xfe026000 port 0xfe026280 irq 407 [ 1.318541] ata5: SATA max UDMA/133 abar m8192@0xfe026000 port 0xfe026300 irq 407 [ 1.318541] ata6: SATA max UDMA/133 abar m8192@0xfe026000 port 0xfe026380 irq 407 [ 1.363538] pata_amd 0000:00:06.0: version 0.4.1 [ 1.363597] pata_amd 0000:00:06.0: setting latency timer to 64 [ 1.363743] scsi6 : pata_amd [ 1.366186] scsi7 : pata_amd [ 1.371244] ata7: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xfc00 irq 14 [ 1.371252] ata8: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xfc08 irq 15 [ 1.383016] Intel(R) PRO/1000 Network Driver - version 7.3.21-k3-NAPI [ 1.384004] Copyright (c) 1999-2006 Intel Corporation. [ 1.395137] e1000e: Intel(R) PRO/1000 Network Driver - 1.0.2-k2 [ 1.396122] e1000e: Copyright (c) 1999-2008 Intel Corporation. [ 1.396122] xen: registering gsi 16 triggering 0 polarity 1 [ 1.396122] xen_allocate_pirq: returning irq 16 for gsi 16 [ 1.396122] xen: --> irq=16 [ 1.396122] xen_set_ioapic_routing: irq 16 gsi 16 vector 144 ioapic 0 pin 16 triggering 1 polarity 1 [ 1.396122] e1000e 0000:07:00.0: PCI INT A -> Link[AE4A] -> GSI 16 (level, low) -> IRQ 16 [ 1.396122] e1000e 0000:07:00.0: setting latency timer to 64 [ 1.396122] alloc irq_desc for 406 on node 0 [ 1.396122] alloc kstat_irqs on node 0 [ 1.582057] 0000:07:00.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:1b:21:2c:68:fe [ 1.582455] 0000:07:00.0: eth0: Intel(R) PRO/1000 Network Connection [ 1.582739] 0000:07:00.0: eth0: MAC: 1, PHY: 4, PBA No: d50854-003 [ 1.583105] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI [ 1.583311] e100: Copyright(c) 1999-2006 Intel Corporation [ 1.583753] sky2 driver version 1.23 [ 1.584049] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64. [ 1.584990] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 22 [ 1.585223] xen: registering gsi 22 triggering 0 polarity 1 [ 1.585229] alloc irq_desc for 22 on node 0 [ 1.585231] alloc kstat_irqs on node 0 [ 1.585237] xen: --> irq=22 [ 1.585241] xen_set_ioapic_routing: irq 22 gsi 22 vector 208 ioapic 0 pin 22 triggering 1 polarity 1 [ 1.585420] forcedeth 0000:00:0a.0: PCI INT A -> Link[APCH] -> GSI 22 (level, low) -> IRQ 22 [ 1.585420] forcedeth 0000:00:0a.0: setting latency timer to 64 [ 1.668021] ata2: SATA link down (SStatus 0 SControl 300) [ 1.668283] ata4: SATA link down (SStatus 0 SControl 300) [ 1.668503] ata5: SATA link down (SStatus 0 SControl 300) [ 1.668721] ata6: SATA link down (SStatus 0 SControl 300) [ 1.668947] ata3: SATA link down (SStatus 0 SControl 300) [ 1.821017] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.822491] ata1.00: ATA-8: Hitachi HDS722020ALA330, JKAOA20N, max UDMA/133 [ 1.822702] ata1.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 1.824314] ata1.00: configured for UDMA/133 [ 1.824626] scsi 0:0:0:0: Direct-Access ATA Hitachi HDS72202 JKAO PQ: 0 ANSI: 5 [ 1.825462] sd 0:0:0:0: [sda] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB) [ 1.825908] sd 0:0:0:0: [sda] Write Protect is off [ 1.826112] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.826161] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 1.826750] sda: [ 1.826940] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.827556] ata8: port disabled. ignoring. [ 1.831357] sda1 sda2 [ 1.832162] sd 0:0:0:0: [sda] Attached SCSI disk [ 2.098561] forcedeth 0000:00:0a.0: ifname eth1, PHY OUI 0x1374 @ 1, addr 00:1f:c6:8c:5e:b2 [ 2.098935] forcedeth 0000:00:0a.0: highdma csum pwrctl mgmt gbit lnktim msi desc-v3 [ 2.099636] console [netcon0] enabled [ 2.099837] netconsole: network logging started [ 2.100311] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 2.100518] ehci_hcd: block sizes: qh 192 qtd 96 itd 192 sitd 96 [ 2.101090] ACPI: PCI Interrupt Link [AUB2] enabled at IRQ 21 [ 2.101296] xen: registering gsi 21 triggering 0 polarity 1 [ 2.101296] alloc irq_desc for 21 on node 0 [ 2.101296] alloc kstat_irqs on node 0 [ 2.101323] xen: --> irq=21 [ 2.101326] xen_set_ioapic_routing: irq 21 gsi 21 vector 216 ioapic 0 pin 21 triggering 1 polarity 1 [ 2.101706] ehci_hcd 0000:00:02.1: PCI INT B -> Link[AUB2] -> GSI 21 (level, low) -> IRQ 21 [ 2.102100] ehci_hcd 0000:00:02.1: setting latency timer to 64 [ 2.102105] ehci_hcd 0000:00:02.1: EHCI Host Controller [ 2.102367] /usr/src/xen-unstable.hg/linux-2.6-pvops.git/drivers/usb/core/inode.c: creating file 'devices' [ 2.102373] /usr/src/xen-unstable.hg/linux-2.6-pvops.git/drivers/usb/core/inode.c: creating file '001' [ 2.102475] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1 [ 2.102849] ehci_hcd 0000:00:02.1: reset hcs_params 0x101f86 dbg=1 cc=1 pcc=15 !ppc ports=6 [ 2.102857] ehci_hcd 0000:00:02.1: reset portroute 0 0 0 0 0 0 [ 2.102861] ehci_hcd 0000:00:02.1: reset hcc_params a086 caching frame 256/512/1024 park [ 2.102914] ehci_hcd 0000:00:02.1: park 0 [ 2.102920] ehci_hcd 0000:00:02.1: reset command 080b02 park=3 ithresh=8 period=1024 Reset HALT [ 2.102935] ehci_hcd 0000:00:02.1: debug port 1 [ 2.103141] ehci_hcd 0000:00:02.1: cache line size of 64 is not supported [ 2.103144] ehci_hcd 0000:00:02.1: supports USB remote wakeup [ 2.103175] ehci_hcd 0000:00:02.1: irq 21, io mem 0xfe02e000 [ 2.103381] ehci_hcd 0000:00:02.1: reset command 080b02 park=3 ithresh=8 period=1024 Reset HALT [ 2.103388] ehci_hcd 0000:00:02.1: init command 010009 (park)=0 ithresh=1 period=256 RUN [ 2.109016] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00 [ 2.109287] usb usb1: default language 0x0409 [ 2.109299] usb usb1: udev 1, busnum 1, minor = 0 [ 2.109302] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 2.109508] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.109875] usb usb1: Product: EHCI Host Controller [ 2.110076] usb usb1: Manufacturer: Linux 2.6.31.6 ehci_hcd [ 2.110252] usb usb1: SerialNumber: 0000:00:02.1 [ 2.110526] usb usb1: uevent [ 2.110626] usb usb1: usb_probe_device [ 2.110630] usb usb1: configuration #1 chosen from 1 choice [ 2.110842] usb usb1: adding 1-0:1.0 (config #1, interface 0) [ 2.110863] usb 1-0:1.0: uevent [ 2.110928] hub 1-0:1.0: usb_probe_interface [ 2.110931] hub 1-0:1.0: usb_probe_interface - got id [ 2.110934] hub 1-0:1.0: USB hub found [ 2.111153] hub 1-0:1.0: 6 ports detected [ 2.111354] hub 1-0:1.0: standalone hub [ 2.111356] hub 1-0:1.0: no power switching (usb 1.0) [ 2.111359] hub 1-0:1.0: individual port over-current protection [ 2.111362] hub 1-0:1.0: power on to power good time: 20ms [ 2.111375] hub 1-0:1.0: local power source is good [ 2.111378] hub 1-0:1.0: trying to enable port power on non-switchable hub [ 2.111412] /usr/src/xen-unstable.hg/linux-2.6-pvops.git/drivers/usb/core/inode.c: creating file '001' [ 2.111756] ACPI: PCI Interrupt Link [AU2B] disabled and referenced, BIOS bug [ 2.112192] ACPI: PCI Interrupt Link [AU2B] enabled at IRQ 20 [ 2.112366] xen: registering gsi 20 triggering 0 polarity 1 [ 2.112366] alloc irq_desc for 20 on node 0 [ 2.112366] alloc kstat_irqs on node 0 [ 2.112420] xen: --> irq=20 [ 2.112423] xen_set_ioapic_routing: irq 20 gsi 20 vector 33 ioapic 0 pin 20 triggering 1 polarity 1 [ 2.112803] ehci_hcd 0000:00:04.1: PCI INT B -> Link[AU2B] -> GSI 20 (level, low) -> IRQ 20 [ 2.113190] ehci_hcd 0000:00:04.1: setting latency timer to 64 [ 2.113194] ehci_hcd 0000:00:04.1: EHCI Host Controller [ 2.113434] /usr/src/xen-unstable.hg/linux-2.6-pvops.git/drivers/usb/core/inode.c: creating file '002' [ 2.113538] ehci_hcd 0000:00:04.1: new USB bus registered, assigned bus number 2 [ 2.113913] ehci_hcd 0000:00:04.1: reset hcs_params 0x101f86 dbg=1 cc=1 pcc=15 !ppc ports=6 [ 2.113921] ehci_hcd 0000:00:04.1: reset portroute 0 0 0 0 0 0 [ 2.113925] ehci_hcd 0000:00:04.1: reset hcc_params a086 caching frame 256/512/1024 park [ 2.113971] ehci_hcd 0000:00:04.1: park 0 [ 2.113976] ehci_hcd 0000:00:04.1: reset command 080b02 park=3 ithresh=8 period=1024 Reset HALT [ 2.113991] ehci_hcd 0000:00:04.1: debug port 1 [ 2.114197] ehci_hcd 0000:00:04.1: cache line size of 64 is not supported [ 2.114200] ehci_hcd 0000:00:04.1: supports USB remote wakeup [ 2.114226] ehci_hcd 0000:00:04.1: irq 20, io mem 0xfe02c000 [ 2.114432] ehci_hcd 0000:00:04.1: reset command 080b02 park=3 ithresh=8 period=1024 Reset HALT [ 2.114440] ehci_hcd 0000:00:04.1: init command 010009 (park)=0 ithresh=1 period=256 RUN [ 2.120016] ehci_hcd 0000:00:04.1: USB 2.0 started, EHCI 1.00 [ 2.120244] usb usb2: default language 0x0409 [ 2.120289] usb usb2: udev 1, busnum 2, minor = 128 [ 2.120292] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 2.120498] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.120865] usb usb2: Product: EHCI Host Controller [ 2.121066] usb usb2: Manufacturer: Linux 2.6.31.6 ehci_hcd [ 2.121269] usb usb2: SerialNumber: 0000:00:04.1 [ 2.121517] usb usb2: uevent [ 2.121586] usb usb2: usb_probe_device [ 2.121590] usb usb2: configuration #1 chosen from 1 choice [ 2.121828] usb usb2: adding 2-0:1.0 (config #1, interface 0) [ 2.121846] usb 2-0:1.0: uevent [ 2.121912] hub 2-0:1.0: usb_probe_interface [ 2.121916] hub 2-0:1.0: usb_probe_interface - got id [ 2.121918] hub 2-0:1.0: USB hub found [ 2.122136] hub 2-0:1.0: 6 ports detected [ 2.122339] hub 2-0:1.0: standalone hub [ 2.122341] hub 2-0:1.0: no power switching (usb 1.0) [ 2.122344] hub 2-0:1.0: individual port over-current protection [ 2.122347] hub 2-0:1.0: power on to power good time: 20ms [ 2.122360] hub 2-0:1.0: local power source is good [ 2.122363] hub 2-0:1.0: trying to enable port power on non-switchable hub [ 2.122410] /usr/src/xen-unstable.hg/linux-2.6-pvops.git/drivers/usb/core/inode.c: creating file '001' [ 2.122958] ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18 [ 2.123191] xen: registering gsi 18 triggering 0 polarity 1 [ 2.123197] alloc irq_desc for 18 on node 0 [ 2.123200] alloc kstat_irqs on node 0 [ 2.123205] xen: --> irq=18 [ 2.123209] xen_set_ioapic_routing: irq 18 gsi 18 vector 41 ioapic 0 pin 18 triggering 1 polarity 1 [ 2.123351] ehci_hcd 0000:01:08.2: PCI INT C -> Link[APC3] -> GSI 18 (level, low) -> IRQ 18 [ 2.123351] ehci_hcd 0000:01:08.2: EHCI Host Controller [ 2.124190] /usr/src/xen-unstable.hg/linux-2.6-pvops.git/drivers/usb/core/inode.c: creating file '003' [ 2.124303] ehci_hcd 0000:01:08.2: new USB bus registered, assigned bus number 3 [ 2.124706] ehci_hcd 0000:01:08.2: reset hcs_params 0x2204 dbg=0 cc=2 pcc=2 ordered !ppc ports=4 [ 2.124710] ehci_hcd 0000:01:08.2: reset hcc_params 6872 thresh 7 uframes 256/512/1024 [ 2.124765] ehci_hcd 0000:01:08.2: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT [ 2.124788] ehci_hcd 0000:01:08.2: MWI active [ 2.124790] ehci_hcd 0000:01:08.2: supports USB remote wakeup [ 2.124816] ehci_hcd 0000:01:08.2: irq 18, io mem 0xfdeff000 [ 2.125023] ehci_hcd 0000:01:08.2: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT [ 2.125029] ehci_hcd 0000:01:08.2: init command 010009 (park)=0 ithresh=1 period=256 RUN [ 2.131016] ehci_hcd 0000:01:08.2: USB 2.0 started, EHCI 1.00 [ 2.131244] usb usb3: default language 0x0409 [ 2.131262] usb usb3: udev 1, busnum 3, minor = 256 [ 2.131265] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002 [ 2.131498] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.131865] usb usb3: Product: EHCI Host Controller [ 2.132252] usb usb3: Manufacturer: Linux 2.6.31.6 ehci_hcd [ 2.132252] usb usb3: SerialNumber: 0000:01:08.2 [ 2.139992] usb usb3: uevent [ 2.140066] usb usb3: usb_probe_device [ 2.140069] usb usb3: configuration #1 chosen from 1 choice [ 2.140286] usb usb3: adding 3-0:1.0 (config #1, interface 0) [ 2.140304] usb 3-0:1.0: uevent [ 2.140370] hub 3-0:1.0: usb_probe_interface [ 2.140373] hub 3-0:1.0: usb_probe_interface - got id [ 2.140376] hub 3-0:1.0: USB hub found [ 2.140596] hub 3-0:1.0: 4 ports detected [ 2.140796] hub 3-0:1.0: standalone hub [ 2.140798] hub 3-0:1.0: no power switching (usb 1.0) [ 2.140801] hub 3-0:1.0: individual port over-current protection [ 2.140804] hub 3-0:1.0: power on to power good time: 20ms [ 2.140811] hub 3-0:1.0: local power source is good [ 2.140814] hub 3-0:1.0: trying to enable port power on non-switchable hub [ 2.140846] /usr/src/xen-unstable.hg/linux-2.6-pvops.git/drivers/usb/core/inode.c: creating file '001' [ 2.141430] ACPI: PCI Interrupt Link [AE3D] enabled at IRQ 16 [ 2.141634] xen: registering gsi 16 triggering 0 polarity 1 [ 2.141637] xen_allocate_pirq: returning irq 16 for gsi 16 [ 2.141840] xen: --> irq=16 [ 2.141843] xen_set_ioapic_routing: irq 16 gsi 16 vector 144 ioapic 0 pin 16 triggering 1 polarity 1 [ 2.142218] ehci_hcd 0000:06:01.2: PCI INT C -> Link[AE3D] -> GSI 16 (level, low) -> IRQ 16 [ 2.142254] ehci_hcd 0000:06:01.2: EHCI Host Controller [ 2.142846] /usr/src/xen-unstable.hg/linux-2.6-pvops.git/drivers/usb/core/inode.c: creating file '004' [ 2.142951] ehci_hcd 0000:06:01.2: new USB bus registered, assigned bus number 4 [ 2.143328] ehci_hcd 0000:06:01.2: reset hcs_params 0x2395 dbg=0 cc=2 pcc=3 ports=5 [ 2.143338] ehci_hcd 0000:06:01.2: reset portroute 1 0 1 0 0 [ 2.143343] ehci_hcd 0000:06:01.2: reset hcc_params e806 thresh 0 uframes 256/512/1024 park [ 2.143399] ehci_hcd 0000:06:01.2: park 0 [ 2.143405] ehci_hcd 0000:06:01.2: reset command 080b02 park=3 ithresh=8 period=1024 Reset HALT [ 2.143413] ehci_hcd 0000:06:01.2: ...powerup ports... [ 2.164037] ehci_hcd 0000:06:01.2: MWI active [ 2.164040] ehci_hcd 0000:06:01.2: supports USB remote wakeup [ 2.164066] ehci_hcd 0000:06:01.2: irq 16, io mem 0xfd8fd000 [ 2.164274] ehci_hcd 0000:06:01.2: reset command 080b02 park=3 ithresh=8 period=1024 Reset HALT [ 2.164282] ehci_hcd 0000:06:01.2: init command 010009 (park)=0 ithresh=1 period=256 RUN [ 2.170017] ehci_hcd 0000:06:01.2: USB 2.0 started, EHCI 1.00 [ 2.170285] usb usb4: default language 0x0409 [ 2.170296] usb usb4: udev 1, busnum 4, minor = 384 [ 2.170299] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002 [ 2.170506] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.170873] usb usb4: Product: EHCI Host Controller [ 2.171074] usb usb4: Manufacturer: Linux 2.6.31.6 ehci_hcd [ 2.171252] usb usb4: SerialNumber: 0000:06:01.2 [ 2.171530] usb usb4: uevent [ 2.171628] usb usb4: usb_probe_device [ 2.171632] usb usb4: configuration #1 chosen from 1 choice [ 2.171843] usb usb4: adding 4-0:1.0 (config #1, interface 0) [ 2.171861] usb 4-0:1.0: uevent [ 2.171927] hub 4-0:1.0: usb_probe_interface [ 2.171930] hub 4-0:1.0: usb_probe_interface - got id [ 2.171933] hub 4-0:1.0: USB hub found [ 2.172152] hub 4-0:1.0: 5 ports detected [ 2.172353] hub 4-0:1.0: standalone hub [ 2.172356] hub 4-0:1.0: individual port power switching [ 2.172358] hub 4-0:1.0: individual port over-current protection [ 2.172361] hub 4-0:1.0: power on to power good time: 20ms [ 2.172373] hub 4-0:1.0: local power source is good [ 2.172376] hub 4-0:1.0: enabling power on all ports [ 2.172415] /usr/src/xen-unstable.hg/linux-2.6-pvops.git/drivers/usb/core/inode.c: creating file '001' [ 2.172519] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.172725] ohci_hcd: block sizes: ed 80 td 96 [ 2.173299] ACPI: PCI Interrupt Link [AUBA] enabled at IRQ 23 [ 2.173504] xen: registering gsi 23 triggering 0 polarity 1 [ 2.173507] xen_allocate_pirq: returning irq 23 for gsi 23 [ 2.173709] xen: --> irq=23 [ 2.173712] xen_set_ioapic_routing: irq 23 gsi 23 vector 184 ioapic 0 pin 23 triggering 1 polarity 1 [ 2.174087] ohci_hcd 0000:00:02.0: PCI INT A -> Link[AUBA] -> GSI 23 (level, low) -> IRQ 23 [ 2.174253] ohci_hcd 0000:00:02.0: setting latency timer to 64 [ 2.174253] ohci_hcd 0000:00:02.0: OHCI Host Controller [ 2.174718] /usr/src/xen-unstable.hg/linux-2.6-pvops.git/drivers/usb/core/inode.c: creating file '005' [ 2.174821] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 5 [ 2.175218] ohci_hcd 0000:00:02.0: created debug files [ 2.175221] ohci_hcd 0000:00:02.0: supports USB remote wakeup [ 2.175249] ohci_hcd 0000:00:02.0: irq 23, io mem 0xfe02f000 [ 2.211034] ehci_hcd 0000:00:02.1: GetStatus port 6 status 001403 POWER sig=k CSC CONNECT [ 2.211039] hub 1-0:1.0: port 6: status 0501 change 0001 [ 2.222034] hub 2-0:1.0: state 7 ports 6 chg 0000 evt 0000 [ 2.228020] ohci_hcd 0000:00:02.0: OHCI controller state [ 2.228024] ohci_hcd 0000:00:02.0: OHCI 1.0, NO legacy support registers [ 2.228028] ohci_hcd 0000:00:02.0: control 0x683 RWE RWC HCFS=operational CBSR=3 [ 2.228032] ohci_hcd 0000:00:02.0: cmdstatus 0x00000 SOC=0 [ 2.228036] ohci_hcd 0000:00:02.0: intrstatus 0x00000004 SF [ 2.228040] ohci_hcd 0000:00:02.0: intrenable 0x8000005a MIE RHSC UE RD WDH [ 2.228045] ohci_hcd 0000:00:02.0: hcca frame #0003 [ 2.228050] ohci_hcd 0000:00:02.0: roothub.a 01000206 POTPGT=1 NPS NDP=6(6) [ 2.228054] ohci_hcd 0000:00:02.0: roothub.b 00000000 PPCM=0000 DR=0000 [ 2.228058] ohci_hcd 0000:00:02.0: roothub.status 00008000 DRWE [ 2.228062] ohci_hcd 0000:00:02.0: roothub.portstatus [0] 0x00000100 PPS [ 2.228066] ohci_hcd 0000:00:02.0: roothub.portstatus [1] 0x00000100 PPS [ 2.228071] ohci_hcd 0000:00:02.0: roothub.portstatus [2] 0x00000100 PPS [ 2.228075] ohci_hcd 0000:00:02.0: roothub.portstatus [3] 0x00000100 PPS [ 2.228079] ohci_hcd 0000:00:02.0: roothub.portstatus [4] 0x00000100 PPS [ 2.228084] ohci_hcd 0000:00:02.0: roothub.portstatus [5] 0x00000100 PPS [ 2.228099] usb usb5: default language 0x0409 [ 2.228110] usb usb5: udev 1, busnum 5, minor = 512 [ 2.228112] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 [ 2.228252] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.228252] usb usb5: Product: OHCI Host Controller [ 2.228252] usb usb5: Manufacturer: Linux 2.6.31.6 ohci_hcd [ 2.228252] usb usb5: SerialNumber: 0000:00:02.0 [ 2.229366] usb usb5: uevent [ 2.229437] usb usb5: usb_probe_device [ 2.229441] usb usb5: configuration #1 chosen from 1 choice [ 2.229651] usb usb5: adding 5-0:1.0 (config #1, interface 0) [ 2.229669] usb 5-0:1.0: uevent [ 2.229734] hub 5-0:1.0: usb_probe_interface [ 2.229737] hub 5-0:1.0: usb_probe_interface - got id [ 2.229740] hub 5-0:1.0: USB hub found [ 2.229987] hub 5-0:1.0: 6 ports detected [ 2.230187] hub 5-0:1.0: standalone hub [ 2.230189] hub 5-0:1.0: no power switching (usb 1.0) [ 2.230192] hub 5-0:1.0: global over-current protection [ 2.230195] hub 5-0:1.0: power on to power good time: 2ms [ 2.230201] hub 5-0:1.0: local power source is good [ 2.230204] hub 5-0:1.0: no over-current condition exists [ 2.230207] hub 5-0:1.0: trying to enable port power on non-switchable hub [ 2.230233] /usr/src/xen-unstable.hg/linux-2.6-pvops.git/drivers/usb/core/inode.c: creating file '001' [ 2.230784] ACPI: PCI Interrupt Link [AU1B] enabled at IRQ 22 [ 2.230989] xen: registering gsi 22 triggering 0 polarity 1 [ 2.230992] xen_allocate_pirq: returning irq 22 for gsi 22 [ 2.231222] xen: --> irq=22 [ 2.231225] xen_set_ioapic_routing: irq 22 gsi 22 vector 208 ioapic 0 pin 22 triggering 1 polarity 1 [ 2.231253] ohci_hcd 0000:00:04.0: PCI INT A -> Link[AU1B] -> GSI 22 (level, low) -> IRQ 22 [ 2.231253] ohci_hcd 0000:00:04.0: setting latency timer to 64 [ 2.231253] ohci_hcd 0000:00:04.0: OHCI Host Controller [ 2.232205] /usr/src/xen-unstable.hg/linux-2.6-pvops.git/drivers/usb/core/inode.c: creating file '006' [ 2.232314] ohci_hcd 0000:00:04.0: new USB bus registered, assigned bus number 6 [ 2.232739] ohci_hcd 0000:00:04.0: created debug files [ 2.232741] ohci_hcd 0000:00:04.0: supports USB remote wakeup [ 2.232767] ohci_hcd 0000:00:04.0: irq 22, io mem 0xfe02d000 [ 2.240021] ehci_hcd 0000:01:08.2: GetStatus port 1 status 001803 POWER sig=j CSC CONNECT [ 2.240026] hub 3-0:1.0: port 1: status 0501 change 0001 [ 2.272026] ehci_hcd 0000:06:01.2: GetStatus port 3 status 001403 POWER sig=k CSC CONNECT [ 2.272031] hub 4-0:1.0: port 3: status 0501 change 0001 [ 2.272041] ehci_hcd 0000:06:01.2: GetStatus port 4 status 001803 POWER sig=j CSC CONNECT [ 2.272045] hub 4-0:1.0: port 4: status 0501 change 0001 [ 2.285020] ohci_hcd 0000:00:04.0: OHCI controller state [ 2.285023] ohci_hcd 0000:00:04.0: OHCI 1.0, NO legacy support registers [ 2.285028] ohci_hcd 0000:00:04.0: control 0x683 RWE RWC HCFS=operational CBSR=3 [ 2.285031] ohci_hcd 0000:00:04.0: cmdstatus 0x00000 SOC=0 [ 2.285035] ohci_hcd 0000:00:04.0: intrstatus 0x00000004 SF [ 2.285039] ohci_hcd 0000:00:04.0: intrenable 0x8000005a MIE RHSC UE RD WDH [ 2.285045] ohci_hcd 0000:00:04.0: hcca frame #0003 [ 2.285049] ohci_hcd 0000:00:04.0: roothub.a 01000206 POTPGT=1 NPS NDP=6(6) [ 2.285053] ohci_hcd 0000:00:04.0: roothub.b 00000000 PPCM=0000 DR=0000 [ 2.285057] ohci_hcd 0000:00:04.0: roothub.status 00008000 DRWE [ 2.285062] ohci_hcd 0000:00:04.0: roothub.portstatus [0] 0x00000100 PPS [ 2.285066] ohci_hcd 0000:00:04.0: roothub.portstatus [1] 0x00000100 PPS [ 2.285070] ohci_hcd 0000:00:04.0: roothub.portstatus [2] 0x00000100 PPS [ 2.285075] ohci_hcd 0000:00:04.0: roothub.portstatus [3] 0x00000100 PPS [ 2.285079] ohci_hcd 0000:00:04.0: roothub.portstatus [4] 0x00000100 PPS [ 2.285083] ohci_hcd 0000:00:04.0: roothub.portstatus [5] 0x00000100 PPS [ 2.285098] usb usb6: default language 0x0409 [ 2.285109] usb usb6: udev 1, busnum 6, minor = 640 [ 2.285112] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 [ 2.285252] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.285252] usb usb6: Product: OHCI Host Controller [ 2.285252] usb usb6: Manufacturer: Linux 2.6.31.6 ohci_hcd [ 2.285252] usb usb6: SerialNumber: 0000:00:04.0 [ 2.286366] usb usb6: uevent [ 2.286437] usb usb6: usb_probe_device [ 2.286440] usb usb6: configuration #1 chosen from 1 choice [ 2.286677] usb usb6: adding 6-0:1.0 (config #1, interface 0) [ 2.286695] usb 6-0:1.0: uevent [ 2.286760] hub 6-0:1.0: usb_probe_interface [ 2.286763] hub 6-0:1.0: usb_probe_interface - got id [ 2.286766] hub 6-0:1.0: USB hub found [ 2.286985] hub 6-0:1.0: 6 ports detected [ 2.287185] hub 6-0:1.0: standalone hub [ 2.287188] hub 6-0:1.0: no power switching (usb 1.0) [ 2.287191] hub 6-0:1.0: global over-current protection [ 2.287193] hub 6-0:1.0: power on to power good time: 2ms [ 2.287200] hub 6-0:1.0: local power source is good [ 2.287203] hub 6-0:1.0: no over-current condition exists [ 2.287206] hub 6-0:1.0: trying to enable port power on non-switchable hub [ 2.287233] /usr/src/xen-unstable.hg/linux-2.6-pvops.git/drivers/usb/core/inode.c: creating file '001' [ 2.287795] ACPI: PCI Interrupt Link [AE3B] enabled at IRQ 16 [ 2.288001] xen: registering gsi 16 triggering 0 polarity 1 [ 2.288005] xen_allocate_pirq: returning irq 16 for gsi 16 [ 2.288234] xen: --> irq=16 [ 2.288238] xen_set_ioapic_routing: irq 16 gsi 16 vector 144 ioapic 0 pin 16 triggering 1 polarity 1 [ 2.288253] ohci_hcd 0000:06:01.0: PCI INT A -> Link[AE3B] -> GSI 16 (level, low) -> IRQ 16 [ 2.288253] ohci_hcd 0000:06:01.0: OHCI Host Controller [ 2.289228] /usr/src/xen-unstable.hg/linux-2.6-pvops.git/drivers/usb/core/inode.c: creating file '007' [ 2.289335] ohci_hcd 0000:06:01.0: new USB bus registered, assigned bus number 7 [ 2.289737] ohci_hcd 0000:06:01.0: enabled NEC chipset lost interrupt quirk [ 2.289770] ohci_hcd 0000:06:01.0: created debug files [ 2.289773] ohci_hcd 0000:06:01.0: supports USB remote wakeup [ 2.289782] ohci_hcd 0000:06:01.0: irq 16, io mem 0xfd8ff000 [ 2.311025] hub 1-0:1.0: state 7 ports 6 chg 0040 evt 0000 [ 2.311034] hub 1-0:1.0: port 6, status 0501, change 0000, 480 Mb/s [ 2.311044] ehci_hcd 0000:00:02.1: port 6 low speed --> companion [ 2.330028] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [5] = 0x00010301 CSC LSDA PPS CCS [ 2.330033] hub 5-0:1.0: port 6: status 0301 change 0001 [ 2.370023] ehci_hcd 0000:00:02.1: GetStatus port 6 status 003402 POWER OWNER sig=k CSC [ 2.370032] ohci_hcd 0000:06:01.0: OHCI controller state [ 2.370037] ohci_hcd 0000:06:01.0: OHCI 1.0, NO legacy support registers [ 2.370042] ohci_hcd 0000:06:01.0: control 0x283 RWC HCFS=operational CBSR=3 [ 2.370047] hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0040 [ 2.370049] ohci_hcd 0000:06:01.0: cmdstatus 0x00000 SOC=0 [ 2.370054] ohci_hcd 0000:06:01.0: intrstatus 0x00000004 SF [ 2.370059] ohci_hcd 0000:06:01.0: intrenable 0x8000005a MIE RHSC UE RD WDH [ 2.370062] hub 3-0:1.0: state 7 ports 4 chg 0002 evt 0000 [ 2.370069] hub 3-0:1.0: port 1, status 0501, change 0000, 480 Mb/s [ 2.370074] ohci_hcd 0000:06:01.0: hcca frame #001f [ 2.370080] ohci_hcd 0000:06:01.0: roothub.a 0f000203 POTPGT=15 NPS NDP=3(3) [ 2.370084] ohci_hcd 0000:06:01.0: roothub.b 00000000 PPCM=0000 DR=0000 [ 2.370089] ohci_hcd 0000:06:01.0: roothub.status 00008000 DRWE [ 2.370094] ohci_hcd 0000:06:01.0: roothub.portstatus [0] 0x00000100 PPS [ 2.370099] ohci_hcd 0000:06:01.0: roothub.portstatus [1] 0x00000100 PPS [ 2.370104] ohci_hcd 0000:06:01.0: roothub.portstatus [2] 0x00000100 PPS [ 2.370120] usb usb7: default language 0x0409 [ 2.370131] usb usb7: udev 1, busnum 7, minor = 768 [ 2.370134] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001 [ 2.370252] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.370252] usb usb7: Product: OHCI Host Controller [ 2.370252] usb usb7: Manufacturer: Linux 2.6.31.6 ohci_hcd [ 2.370252] usb usb7: SerialNumber: 0000:06:01.0 [ 2.371389] usb usb7: uevent [ 2.371459] usb usb7: usb_probe_device [ 2.371462] usb usb7: configuration #1 chosen from 1 choice [ 2.371673] usb usb7: adding 7-0:1.0 (config #1, interface 0) [ 2.371691] usb 7-0:1.0: uevent [ 2.371754] hub 7-0:1.0: usb_probe_interface [ 2.371757] hub 7-0:1.0: usb_probe_interface - got id [ 2.371760] hub 7-0:1.0: USB hub found [ 2.371982] hub 7-0:1.0: 3 ports detected [ 2.372182] hub 7-0:1.0: standalone hub [ 2.372184] hub 7-0:1.0: no power switching (usb 1.0) [ 2.372187] hub 7-0:1.0: global over-current protection [ 2.372190] hub 7-0:1.0: power on to power good time: 30ms [ 2.372197] hub 7-0:1.0: local power source is good [ 2.372200] hub 7-0:1.0: no over-current condition exists [ 2.372204] hub 7-0:1.0: trying to enable port power on non-switchable hub [ 2.372225] /usr/src/xen-unstable.hg/linux-2.6-pvops.git/drivers/usb/core/inode.c: creating file '001' [ 2.372822] ACPI: PCI Interrupt Link [AE3C] enabled at IRQ 16 [ 2.373028] xen: registering gsi 16 triggering 0 polarity 1 [ 2.373031] xen_allocate_pirq: returning irq 16 for gsi 16 [ 2.373233] xen: --> irq=16 [ 2.373236] xen_set_ioapic_routing: irq 16 gsi 16 vector 144 ioapic 0 pin 16 triggering 1 polarity 1 [ 2.373257] ohci_hcd 0000:06:01.1: PCI INT B -> Link[AE3C] -> GSI 16 (level, low) -> IRQ 16 [ 2.373257] ohci_hcd 0000:06:01.1: OHCI Host Controller [ 2.374255] /usr/src/xen-unstable.hg/linux-2.6-pvops.git/drivers/usb/core/inode.c: creating file '008' [ 2.374360] ohci_hcd 0000:06:01.1: new USB bus registered, assigned bus number 8 [ 2.374732] ohci_hcd 0000:06:01.1: enabled NEC chipset lost interrupt quirk [ 2.374761] ohci_hcd 0000:06:01.1: created debug files [ 2.374764] ohci_hcd 0000:06:01.1: supports USB remote wakeup [ 2.374773] ohci_hcd 0000:06:01.1: irq 16, io mem 0xfd8fe000 [ 2.420314] ehci_hcd 0000:01:08.2: port 1 high speed [ 2.420319] ehci_hcd 0000:01:08.2: GetStatus port 1 status 001005 POWER sig=se0 PE CONNECT [ 2.455077] ohci_hcd 0000:06:01.1: OHCI controller state [ 2.455082] ohci_hcd 0000:06:01.1: OHCI 1.0, NO legacy support registers [ 2.455088] ohci_hcd 0000:06:01.1: control 0x283 RWC HCFS=operational CBSR=3 [ 2.455092] ohci_hcd 0000:06:01.1: cmdstatus 0x00000 SOC=0 [ 2.455097] ohci_hcd 0000:06:01.1: intrstatus 0x00000004 SF [ 2.455102] ohci_hcd 0000:06:01.1: intrenable 0x8000005a MIE RHSC UE RD WDH [ 2.455113] ohci_hcd 0000:06:01.1: hcca frame #001f [ 2.455118] ohci_hcd 0000:06:01.1: roothub.a 0f000202 POTPGT=15 NPS NDP=2(2) [ 2.455122] ohci_hcd 0000:06:01.1: roothub.b 00000000 PPCM=0000 DR=0000 [ 2.455127] ohci_hcd 0000:06:01.1: roothub.status 00008000 DRWE [ 2.455132] ohci_hcd 0000:06:01.1: roothub.portstatus [0] 0x00000100 PPS [ 2.455137] ohci_hcd 0000:06:01.1: roothub.portstatus [1] 0x00000100 PPS [ 2.455171] usb usb8: default language 0x0409 [ 2.455183] usb usb8: udev 1, busnum 8, minor = 896 [ 2.455186] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001 [ 2.455402] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.455770] usb usb8: Product: OHCI Host Controller [ 2.455997] usb usb8: Manufacturer: Linux 2.6.31.6 ohci_hcd [ 2.456149] usb usb8: SerialNumber: 0000:06:01.1 [ 2.456467] usb usb8: uevent [ 2.456549] usb usb8: usb_probe_device [ 2.456553] usb usb8: configuration #1 chosen from 1 choice [ 2.456764] usb usb8: adding 8-0:1.0 (config #1, interface 0) [ 2.456787] usb 8-0:1.0: uevent [ 2.456859] hub 8-0:1.0: usb_probe_interface [ 2.456862] hub 8-0:1.0: usb_probe_interface - got id [ 2.456865] hub 8-0:1.0: USB hub found [ 2.457110] hub 8-0:1.0: 2 ports detected [ 2.457337] hub 8-0:1.0: standalone hub [ 2.457339] hub 8-0:1.0: no power switching (usb 1.0) [ 2.457342] hub 8-0:1.0: global over-current protection [ 2.457345] hub 8-0:1.0: power on to power good time: 30ms [ 2.457353] hub 8-0:1.0: local power source is good [ 2.457356] hub 8-0:1.0: no over-current condition exists [ 2.457359] hub 8-0:1.0: trying to enable port power on non-switchable hub [ 2.457382] /usr/src/xen-unstable.hg/linux-2.6-pvops.git/drivers/usb/core/inode.c: creating file '001' [ 2.457514] uhci_hcd: USB Universal Host Controller Interface driver [ 2.458405] ACPI: PCI Interrupt Link [APC1] enabled at IRQ 16 [ 2.458628] xen: registering gsi 16 triggering 0 polarity 1 [ 2.458632] xen_allocate_pirq: returning irq 16 for gsi 16 [ 2.458834] xen: --> irq=16 [ 2.458838] xen_set_ioapic_routing: irq 16 gsi 16 vector 144 ioapic 0 pin 16 triggering 1 polarity 1 [ 2.459004] uhci_hcd 0000:01:08.0: PCI INT A -> Link[APC1] -> GSI 16 (level, low) -> IRQ 16 [ 2.459004] uhci_hcd 0000:01:08.0: UHCI Host Controller [ 2.468346] /usr/src/xen-unstable.hg/linux-2.6-pvops.git/drivers/usb/core/inode.c: creating file '009' [ 2.468451] uhci_hcd 0000:01:08.0: new USB bus registered, assigned bus number 9 [ 2.476683] uhci_hcd 0000:01:08.0: detected 2 ports [ 2.480819] uhci_hcd 0000:01:08.0: uhci_check_and_reset_hc: cmd = 0x0000 [ 2.480822] uhci_hcd 0000:01:08.0: Performing full reset [ 2.480841] uhci_hcd 0000:01:08.0: supports USB remote wakeup [ 2.480856] usb 3-1: new high speed USB device using ehci_hcd and address 2 [ 2.487772] uhci_hcd 0000:01:08.0: irq 16, io base 0x0000ec00 [ 2.494792] usb usb9: default language 0x0409 [ 2.494804] usb usb9: udev 1, busnum 9, minor = 1024 [ 2.494806] usb usb9: New USB device found, idVendor=1d6b, idProduct=0001 [ 2.495733] usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.495733] usb usb9: Product: UHCI Host Controller [ 2.495733] usb usb9: Manufacturer: Linux 2.6.31.6 uhci_hcd [ 2.495733] usb usb9: SerialNumber: 0000:01:08.0 [ 2.523867] usb usb9: uevent [ 2.523940] usb usb9: usb_probe_device [ 2.523944] usb usb9: configuration #1 chosen from 1 choice [ 2.527972] usb usb9: adding 9-0:1.0 (config #1, interface 0) [ 2.527991] usb 9-0:1.0: uevent [ 2.528062] hub 9-0:1.0: usb_probe_interface [ 2.528065] hub 9-0:1.0: usb_probe_interface - got id [ 2.528068] hub 9-0:1.0: USB hub found [ 2.532140] hub 9-0:1.0: 2 ports detected [ 2.533132] hub 9-0:1.0: standalone hub [ 2.533132] hub 9-0:1.0: no power switching (usb 1.0) [ 2.533132] hub 9-0:1.0: individual port over-current protection [ 2.533132] hub 9-0:1.0: power on to power good time: 2ms [ 2.536296] hub 9-0:1.0: local power source is good [ 2.536299] hub 9-0:1.0: trying to enable port power on non-switchable hub [ 2.536324] /usr/src/xen-unstable.hg/linux-2.6-pvops.git/drivers/usb/core/inode.c: creating file '001' [ 2.536881] ACPI: PCI Interrupt Link [APC2] enabled at IRQ 17 [ 2.537288] xen: registering gsi 17 triggering 0 polarity 1 [ 2.537288] alloc irq_desc for 17 on node 0 [ 2.537288] alloc kstat_irqs on node 0 [ 2.543234] xen: --> irq=17 [ 2.543238] xen_set_ioapic_routing: irq 17 gsi 17 vector 49 ioapic 0 pin 17 triggering 1 polarity 1 [ 2.544228] uhci_hcd 0000:01:08.1: PCI INT B -> Link[APC2] -> GSI 17 (level, low) -> IRQ 17 [ 2.544228] uhci_hcd 0000:01:08.1: UHCI Host Controller [ 2.565413] /usr/src/xen-unstable.hg/linux-2.6-pvops.git/drivers/usb/core/inode.c: creating file '010' [ 2.565706] ehci_hcd 0000:01:08.2: port 1 high speed [ 2.565711] ehci_hcd 0000:01:08.2: GetStatus port 1 status 001005 POWER sig=se0 PE CONNECT [ 2.565823] uhci_hcd 0000:01:08.1: new USB bus registered, assigned bus number 10 [ 2.573732] uhci_hcd 0000:01:08.1: detected 2 ports [ 2.577884] uhci_hcd 0000:01:08.1: uhci_check_and_reset_hc: cmd = 0x0000 [ 2.577887] uhci_hcd 0000:01:08.1: Performing full reset [ 2.577910] uhci_hcd 0000:01:08.1: supports USB remote wakeup [ 2.577938] uhci_hcd 0000:01:08.1: irq 17, io base 0x0000e800 [ 2.584895] usb usb10: default language 0x0409 [ 2.584906] usb usb10: udev 1, busnum 10, minor = 1152 [ 2.584909] usb usb10: New USB device found, idVendor=1d6b, idProduct=0001 [ 2.585835] usb usb10: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.585835] usb usb10: Product: UHCI Host Controller [ 2.585835] usb usb10: Manufacturer: Linux 2.6.31.6 uhci_hcd [ 2.585835] usb usb10: SerialNumber: 0000:01:08.1 [ 2.613981] usb usb10: uevent [ 2.614057] usb usb10: usb_probe_device [ 2.614060] usb usb10: configuration #1 chosen from 1 choice [ 2.619507] usb usb10: adding 10-0:1.0 (config #1, interface 0) [ 2.619527] usb 10-0:1.0: uevent [ 2.619597] hub 10-0:1.0: usb_probe_interface [ 2.619600] hub 10-0:1.0: usb_probe_interface - got id [ 2.619603] hub 10-0:1.0: USB hub found [ 2.622295] hub 10-0:1.0: 2 ports detected [ 2.623267] hub 10-0:1.0: standalone hub [ 2.623267] hub 10-0:1.0: no power switching (usb 1.0) [ 2.623267] hub 10-0:1.0: individual port over-current protection [ 2.623267] hub 10-0:1.0: power on to power good time: 2ms [ 2.626443] hub 10-0:1.0: local power source is good [ 2.626446] hub 10-0:1.0: trying to enable port power on non-switchable hub [ 2.626467] /usr/src/xen-unstable.hg/linux-2.6-pvops.git/drivers/usb/core/inode.c: creating file '001' [ 2.626660] usbcore: registered new interface driver usblp [ 2.627651] Initializing USB Mass Storage driver... [ 2.637581] uhci_hcd 0000:01:08.0: port 1 portsc 008a,00 [ 2.637600] uhci_hcd 0000:01:08.0: port 2 portsc 008a,00 [ 2.637619] usbcore: registered new interface driver usb-storage [ 2.638551] USB Mass Storage support registered. [ 2.648692] usbcore: registered new interface driver libusual [ 2.654451] PNP: No PS/2 controller found. Probing ports directly. [ 2.661487] usb 3-1: default language 0x0409 [ 2.661632] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 2.664255] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 2.670815] usb 3-1: udev 2, busnum 3, minor = 257 [ 2.670818] usb 3-1: New USB device found, idVendor=05e3, idProduct=0608 [ 2.671793] usb 3-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 2.671793] usb 3-1: Product: USB2.0 Hub [ 2.688892] usb 3-1: uevent [ 2.689037] usb 3-1: usb_probe_device [ 2.689041] usb 3-1: configuration #1 chosen from 1 choice [ 2.693077] mice: PS/2 mouse device common for all mice [ 2.698557] usb 3-1: adding 3-1:1.0 (config #1, interface 0) [ 2.698576] usb 3-1:1.0: uevent [ 2.698645] hub 3-1:1.0: usb_probe_interface [ 2.698648] hub 3-1:1.0: usb_probe_interface - got id [ 2.698651] hub 3-1:1.0: USB hub found [ 2.702990] hub 3-1:1.0: 4 ports detected [ 2.703963] hub 3-1:1.0: standalone hub [ 2.703963] hub 3-1:1.0: ganged power switching [ 2.703963] hub 3-1:1.0: global over-current protection [ 2.703963] hub 3-1:1.0: Single TT [ 2.703963] hub 3-1:1.0: TT requires at most 32 FS bit times (2664 ns) [ 2.703963] hub 3-1:1.0: Port indicators are supported [ 2.703963] hub 3-1:1.0: power on to power good time: 100ms [ 2.707034] rtc_cmos 00:05: RTC can wake from S4 [ 2.712414] hub 3-1:1.0: local power source is good [ 2.712417] hub 3-1:1.0: no over-current condition exists [ 2.712421] hub 3-1:1.0: enabling power on all ports [ 2.712515] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0 [ 2.718012] rtc0: alarms up to one year, y3k, 242 bytes nvram [ 2.725487] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@xxxxxxxxxx [ 2.733228] uhci_hcd 0000:01:08.1: port 1 portsc 008a,00 [ 2.733247] uhci_hcd 0000:01:08.1: port 2 portsc 008a,00 [ 2.733283] /usr/src/xen-unstable.hg/linux-2.6-pvops.git/drivers/usb/core/inode.c: creating file '002' [ 2.733311] hub 4-0:1.0: state 7 ports 5 chg 0018 evt 0000 [ 2.733320] hub 4-0:1.0: port 3, status 0501, change 0000, 480 Mb/s [ 2.733331] ehci_hcd 0000:06:01.2: port 3 low speed --> companion [ 2.733547] cpuidle: using governor ladder [ 2.734536] cpuidle: using governor menu [ 2.742160] usbcore: registered new interface driver hiddev [ 2.745731] usbcore: registered new interface driver usbhid [ 2.746725] usbhid: v2.6:USB HID core driver [ 2.757069] Advanced Linux Sound Architecture Driver Version 1.0.20. [ 2.766680] ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 21 [ 2.767009] xen: registering gsi 21 triggering 0 polarity 1 [ 2.767009] xen_allocate_pirq: returning irq 21 for gsi 21 [ 2.767009] xen: --> irq=21 [ 2.767009] xen_set_ioapic_routing: irq 21 gsi 21 vector 216 ioapic 0 pin 21 triggering 1 polarity 1 [ 2.767009] HDA Intel 0000:00:07.0: PCI INT A -> Link[AAZA] -> GSI 21 (level, low) -> IRQ 21 [ 2.767009] HDA Intel 0000:00:07.0: setting latency timer to 64 [ 2.809673] ehci_hcd 0000:06:01.2: GetStatus port 3 status 003402 POWER OWNER sig=k CSC [ 2.809704] hub 4-0:1.0: port 4, status 0501, change 0000, 480 Mb/s [ 2.834249] hub 3-1:1.0: port 4: status 0101 change 0001 [ 2.860174] ehci_hcd 0000:06:01.2: port 4 high speed [ 2.860179] ehci_hcd 0000:06:01.2: GetStatus port 4 status 001005 POWER sig=se0 PE CONNECT [ 2.911018] usb 4-4: new high speed USB device using ehci_hcd and address 3 [ 2.934018] usb 3-1: link qh256-0001/ffff88002e8f4180 start 1 [1/0 us] [ 2.963178] ehci_hcd 0000:06:01.2: port 4 high speed [ 2.963182] ehci_hcd 0000:06:01.2: GetStatus port 4 status 001005 POWER sig=se0 PE CONNECT [ 3.027381] usb 4-4: udev 3, busnum 4, minor = 386 [ 3.027384] usb 4-4: New USB device found, idVendor=eb1a, idProduct=2860 [ 3.028350] usb 4-4: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 3.035298] usb 4-4: uevent [ 3.035401] usb 4-4: usb_probe_device [ 3.035405] usb 4-4: configuration #1 chosen from 1 choice [ 3.035749] usb 4-4: adding 4-4:1.0 (config #1, interface 0) [ 3.035768] usb 4-4:1.0: uevent [ 3.035879] /usr/src/xen-unstable.hg/linux-2.6-pvops.git/drivers/usb/core/inode.c: creating file '003' [ 3.035906] hub 6-0:1.0: state 7 ports 6 chg 0000 evt 0000 [ 3.035912] hub 5-0:1.0: state 7 ports 6 chg 0040 evt 0000 [ 3.035921] hub 5-0:1.0: port 6, status 0301, change 0000, 1.5 Mb/s [ 3.141021] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [5] = 0x00100303 PRSC LSDA PPS PES CCS [ 3.191253] ALSA device list: [ 3.191460] #0: HDA NVidia at 0xfe020000 irq 21 [ 3.191723] Netfilter messages via NETLINK v0.30. [ 3.191944] nf_conntrack version 0.5.0 (6144 buckets, 24576 max) [ 3.192234] usb 5-6: new low speed USB device using ohci_hcd and address 2 [ 3.192712] ctnetlink v0.93: registering with nfnetlink. [ 3.193551] ip_tables: (C) 2000-2006 Netfilter Core Team [ 3.193783] TCP cubic registered [ 3.193981] Initializing XFRM netlink socket [ 3.194609] NET: Registered protocol family 10 [ 3.196232] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 3.196524] IPv6 over IPv4 tunneling driver [ 3.197486] NET: Registered protocol family 17 [ 3.197984] RPC: Registered udp transport module. [ 3.198187] RPC: Registered tcp transport module. [ 3.198701] PM: Resume from disk failed. [ 3.198721] registered taskstats version 1 [ 3.199141] Magic number: 5:72:576 [ 3.199542] Freeing unused kernel memory: 528k freed [ 3.199993] Write protecting the kernel read-only data: 8312k [ 3.300048] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [5] = 0x00100303 PRSC LSDA PPS PES CCS [ 3.375077] usb 5-6: skipped 1 descriptor after interface [ 3.375085] usb 5-6: skipped 1 descriptor after interface [ 3.378052] usb 5-6: default language 0x0409 [ 3.384033] usb 5-6: udev 2, busnum 5, minor = 513 [ 3.384036] usb 5-6: New USB device found, idVendor=046d, idProduct=c517 [ 3.384407] usb 5-6: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 3.384612] usb 5-6: Product: USB Receiver [ 3.384811] usb 5-6: Manufacturer: Logitech [ 3.385137] usb 5-6: uevent [ 3.385155] usb 5-6: usb_probe_device [ 3.385159] usb 5-6: configuration #1 chosen from 1 choice [ 3.387036] usb 5-6: adding 5-6:1.0 (config #1, interface 0) [ 3.387055] usb 5-6:1.0: uevent [ 3.387077] usbhid 5-6:1.0: usb_probe_interface [ 3.387080] usbhid 5-6:1.0: usb_probe_interface - got id [ 3.407465] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:02.0/usb5/5-6/5-6:1.0/input/input3 [ 3.407931] logitech 0003:046D:C517.0001: input,hidraw0: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-0000:00:02.0-6/input0 [ 3.408346] usb 5-6: adding 5-6:1.1 (config #1, interface 1) [ 3.408376] usb 5-6:1.1: uevent [ 3.408398] usbhid 5-6:1.1: usb_probe_interface [ 3.408401] usbhid 5-6:1.1: usb_probe_interface - got id [ 3.413295] usb usb5: uevent [ 3.413325] usb 5-0:1.0: uevent [ 3.413407] usb usb1: uevent [ 3.413435] usb 1-0:1.0: uevent [ 3.413517] usb usb6: uevent [ 3.413545] usb 6-0:1.0: uevent [ 3.413624] usb usb2: uevent [ 3.413652] usb 2-0:1.0: uevent [ 3.414394] usb usb9: uevent [ 3.414423] usb 9-0:1.0: uevent [ 3.414505] usb usb10: uevent [ 3.414534] usb 10-0:1.0: uevent [ 3.414616] usb usb3: uevent [ 3.414645] usb 3-0:1.0: uevent [ 3.414677] usb 3-1: uevent [ 3.414709] usb 3-1:1.0: uevent [ 3.415760] usb usb7: uevent [ 3.415790] usb 7-0:1.0: uevent [ 3.415875] usb usb8: uevent [ 3.415905] usb 8-0:1.0: uevent [ 3.415992] usb usb4: uevent [ 3.416021] usb 4-0:1.0: uevent [ 3.416055] usb 4-4: uevent [ 3.416085] usb 4-4:1.0: uevent [ 3.417036] logitech 0003:046D:C517.0002: fixing up Logitech keyboard report descriptor [ 3.418220] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:02.0/usb5/5-6/5-6:1.1/input/input4 [ 3.418666] /usr/src/xen-unstable.hg/linux-2.6-pvops.git/drivers/usb/core/file.c: looking for a minor, starting at 96 [ 3.418742] logitech 0003:046D:C517.0002: input,hiddev96,hidraw1: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:02.0-6/input1 [ 3.419147] /usr/src/xen-unstable.hg/linux-2.6-pvops.git/drivers/usb/core/inode.c: creating file '002' [ 3.419178] hub 7-0:1.0: state 7 ports 3 chg 0000 evt 0004 [ 3.419187] ohci_hcd 0000:06:01.0: GetStatus roothub.portstatus [1] = 0x00010301 CSC LSDA PPS CCS [ 3.419195] hub 7-0:1.0: port 2, status 0301, change 0001, 1.5 Mb/s [ 3.454284] ohci_hcd 0000:00:04.0: auto-stop root hub [ 3.523054] hub 7-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x301 [ 3.630053] ohci_hcd 0000:06:01.0: GetStatus roothub.portstatus [1] = 0x00100303 PRSC LSDA PPS PES CCS [ 3.681032] usb 7-2: new low speed USB device using ohci_hcd and address 2 [ 3.705026] ohci_hcd 0000:06:01.1: auto-stop root hub [ 3.790063] ohci_hcd 0000:06:01.0: GetStatus roothub.portstatus [1] = 0x00100303 PRSC LSDA PPS PES CCS [ 3.863766] usb 7-2: skipped 1 descriptor after interface [ 3.866762] usb 7-2: default language 0x0409 [ 3.874759] usb 7-2: udev 2, busnum 7, minor = 769 [ 3.874764] usb 7-2: New USB device found, idVendor=10cf, idProduct=5500 [ 3.874980] usb 7-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 3.875011] usb 7-2: Product: USB K8055 [ 3.875011] usb 7-2: Manufacturer: Velleman [ 3.875725] usb 7-2: uevent [ 3.875744] usb 7-2: usb_probe_device [ 3.875748] usb 7-2: configuration #1 chosen from 1 choice [ 3.880769] usb 7-2: adding 7-2:1.0 (config #1, interface 0) [ 3.880823] usb 7-2:1.0: uevent [ 3.880852] usbhid 7-2:1.0: usb_probe_interface [ 3.880855] usbhid 7-2:1.0: usb_probe_interface - got id [ 3.886722] ohci_hcd 0000:06:01.0: urb ffff880001de3780 path 2 ep0in 5ed60000 cc 5 --> status -62 [ 3.893945] /usr/src/xen-unstable.hg/linux-2.6-pvops.git/drivers/usb/core/file.c: looking for a minor, starting at 96 [ 3.894072] generic-usb 0003:10CF:5500.0003: hiddev97,hidraw2: USB HID v1.00 Device [Velleman USB K8055] on usb-0000:06:01.0-2/input0 [ 3.894515] /usr/src/xen-unstable.hg/linux-2.6-pvops.git/drivers/usb/core/inode.c: creating file '002' [ 3.894545] hub 8-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 3.894552] hub 4-0:1.0: state 7 ports 5 chg 0000 evt 0008 [ 3.894564] hub 9-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 3.894569] hub 10-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 3.894574] hub 3-1:1.0: state 7 ports 4 chg 0010 evt 0000 [ 3.894919] hub 3-1:1.0: port 4, status 0101, change 0000, 12 Mb/s [ 3.955035] usb usb9: suspend_rh (auto-stop) [ 3.955063] usb usb10: suspend_rh (auto-stop) [ 3.959439] usb 3-1.4: new high speed USB device using ehci_hcd and address 3 [ 4.036403] usb 3-1.4: skipped 4 descriptors after interface [ 4.036407] usb 3-1.4: skipped 2 descriptors after interface [ 4.036411] usb 3-1.4: skipped 1 descriptor after endpoint [ 4.036414] usb 3-1.4: skipped 2 descriptors after interface [ 4.036417] usb 3-1.4: skipped 1 descriptor after endpoint [ 4.036420] usb 3-1.4: skipped 2 descriptors after interface [ 4.036423] usb 3-1.4: skipped 1 descriptor after endpoint [ 4.036426] usb 3-1.4: skipped 2 descriptors after interface [ 4.036429] usb 3-1.4: skipped 1 descriptor after endpoint [ 4.036432] usb 3-1.4: skipped 2 descriptors after interface [ 4.036437] usb 3-1.4: skipped 1 descriptor after endpoint [ 4.036552] usb 3-1.4: default language 0x0409 [ 4.043421] usb 3-1.4: udev 3, busnum 3, minor = 258 [ 4.043425] usb 3-1.4: New USB device found, idVendor=2304, idProduct=0208 [ 4.043643] usb 3-1.4: New USB device strings: Mfr=2, Product=1, SerialNumber=0 [ 4.044009] usb 3-1.4: Product: PCTV USB2 PAL [ 4.044009] usb 3-1.4: Manufacturer: Pinnacle Systems GmbH [ 4.044545] usb 3-1.4: uevent [ 4.044570] usb 3-1.4: usb_probe_device [ 4.044574] usb 3-1.4: configuration #1 chosen from 1 choice [ 4.044900] usb 3-1.4: adding 3-1.4:1.0 (config #1, interface 0) [ 4.044923] usb 3-1.4:1.0: uevent [ 4.044977] usb 3-1.4: adding 3-1.4:1.1 (config #1, interface 1) [ 4.044995] usb 3-1.4:1.1: uevent [ 4.045033] usb 3-1.4: adding 3-1.4:1.2 (config #1, interface 2) [ 4.045052] usb 3-1.4:1.2: uevent [ 4.045069] /usr/src/xen-unstable.hg/linux-2.6-pvops.git/drivers/usb/core/inode.c: creating file '003' [ 4.045096] hub 5-0:1.0: state 7 ports 6 chg 0000 evt 0040 [ 4.045106] hub 7-0:1.0: state 7 ports 3 chg 0000 evt 0004 [ 4.045113] hub 3-1:1.0: state 7 ports 4 chg 0000 evt 0010 [ 4.530046] PM: Starting manual resume from disk [ 4.530256] PM: Resume from partition 252:1 [ 4.530256] PM: Checking hibernation image. [ 4.550840] PM: Resume from disk failed. [ 4.575871] kjournald starting. Commit interval 5 seconds [ 4.575884] EXT3-fs: mounted filesystem with journal data mode. [ 4.701024] hub 2-0:1.0: hub_suspend [ 4.701035] usb usb2: bus auto-suspend [ 4.701038] ehci_hcd 0000:00:04.1: suspend root hub [ 4.704031] hub 1-0:1.0: hub_suspend [ 4.704040] usb usb1: bus auto-suspend [ 4.704044] ehci_hcd 0000:00:02.1: suspend root hub [ 5.471101] udevd version 125 started [ 5.613729] usb usb5: uevent [ 5.613760] usb 5-0:1.0: uevent [ 5.613793] usb 5-6: uevent [ 5.613824] usb 5-6:1.0: uevent [ 5.613999] usb 5-6:1.1: uevent [ 5.614339] usb usb1: uevent [ 5.614370] usb 1-0:1.0: uevent [ 5.614455] usb usb6: uevent [ 5.614491] usb 6-0:1.0: uevent [ 5.614586] usb usb2: uevent [ 5.614618] usb 2-0:1.0: uevent [ 5.615252] usb usb9: uevent [ 5.615282] usb 9-0:1.0: uevent [ 5.615367] usb usb10: uevent [ 5.615397] usb 10-0:1.0: uevent [ 5.615484] usb usb3: uevent [ 5.615513] usb 3-0:1.0: uevent [ 5.615546] usb 3-1: uevent [ 5.615592] usb 3-1.4: uevent [ 5.615634] usb 3-1.4:1.0: uevent [ 5.615671] usb 3-1.4:1.1: uevent [ 5.615704] usb 3-1.4:1.2: uevent [ 5.615736] usb 3-1:1.0: uevent [ 5.616831] usb usb7: uevent [ 5.616863] usb 7-0:1.0: uevent [ 5.616897] usb 7-2: uevent [ 5.616928] usb 7-2:1.0: uevent [ 5.617122] usb usb8: uevent [ 5.617152] usb 8-0:1.0: uevent [ 5.617239] usb usb4: uevent [ 5.617269] usb 4-0:1.0: uevent [ 5.617303] usb 4-4: uevent [ 5.617334] usb 4-4:1.0: uevent [ 5.704036] hub 6-0:1.0: hub_suspend [ 5.704047] usb usb6: bus auto-suspend [ 5.704051] ohci_hcd 0000:00:04.0: suspend root hub [ 6.598299] ata1.00: configured for UDMA/133 [ 6.598694] ata1: EH complete [ 6.705050] hub 8-0:1.0: hub_suspend [ 6.705062] usb usb8: bus auto-suspend [ 6.705067] ohci_hcd 0000:06:01.1: suspend root hub [ 6.705074] hub 9-0:1.0: hub_suspend [ 6.705078] usb usb9: bus auto-suspend [ 6.705081] usb usb9: suspend_rh [ 6.705102] hub 10-0:1.0: hub_suspend [ 6.705106] usb usb10: bus auto-suspend [ 6.705109] usb usb10: suspend_rh [ 7.522262] ata1.00: configured for UDMA/133 [ 7.522317] ata1: EH complete [ 8.715281] EXT3-fs warning: maximal mount count reached, running e2fsck is recommended [ 8.721239] EXT3 FS on dm-0, internal journal [ 12.745867] kjournald starting. Commit interval 5 seconds [ 12.756309] EXT3 FS on sda1, internal journal [ 12.756582] EXT3-fs: mounted filesystem with writeback data mode. [ 12.804790] kjournald starting. Commit interval 5 seconds [ 12.813035] EXT3 FS on dm-2, internal journal [ 12.813304] EXT3-fs: recovery complete. [ 12.821382] EXT3-fs: mounted filesystem with writeback data mode. [ 12.848012] kjournald starting. Commit interval 5 seconds [ 12.854225] EXT3 FS on dm-3, internal journal [ 12.854495] EXT3-fs: mounted filesystem with writeback data mode. [ 12.883571] kjournald starting. Commit interval 5 seconds [ 12.894568] EXT3 FS on dm-4, internal journal [ 12.894837] EXT3-fs: mounted filesystem with writeback data mode. [ 12.924184] kjournald starting. Commit interval 5 seconds [ 12.931535] EXT3 FS on dm-5, internal journal [ 12.931805] EXT3-fs: mounted filesystem with writeback data mode. [ 12.952940] kjournald starting. Commit interval 5 seconds [ 12.964211] EXT3 FS on dm-6, internal journal [ 12.964482] EXT3-fs: mounted filesystem with writeback data mode. [ 12.999510] kjournald starting. Commit interval 5 seconds [ 13.005859] EXT3 FS on dm-9, internal journal [ 13.006128] EXT3-fs: mounted filesystem with writeback data mode. [ 13.028406] kjournald starting. Commit interval 5 seconds [ 13.041155] EXT3 FS on dm-7, internal journal [ 13.041425] EXT3-fs: mounted filesystem with writeback data mode. [ 13.071791] Adding 2097144k swap on /dev/mapper/serveerstertje-swap. Priority:-1 extents:1 across:2097144k [ 14.824792] ADDRCONF(NETDEV_UP): eth1: link is not ready [ 14.935153] alloc irq_desc for 405 on node 0 [ 14.935156] alloc kstat_irqs on node 0 [ 16.256086] e1000e: eth1 NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX [ 16.256091] 0000:07:00.0: eth1: 10/100 speed: disabling TSO [ 16.256343] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready [ 17.167614] eth1: IPv6 duplicate address detected! [ 22.142232] alloc irq_desc for 404 on node 0 [ 22.142237] alloc kstat_irqs on node 0 [ 22.142315] xenbus_probe wake_waiting [ 22.142318] alloc irq_desc for 403 on node 0 [ 22.142321] alloc kstat_irqs on node 0 [ 22.143050] xenbus_probe wake_waiting [ 22.156769] XENBUS: Unable to read cpu state [ 22.157172] XENBUS: Unable to read cpu state [ 22.157690] xenbus_probe_devices backend [ 22.159099] xenbus_probe_devices failed xenbus_directory [ 22.159303] backend_probe_and_watch devices probed ok [ 22.159650] backend_probe_and_watch watch add ok ok [ 22.159879] backend_probe_and_watch all done [ 22.160004] xenbus_probe_devices device [ 22.161909] xenbus_probe_devices failed xenbus_directory [ 22.162015] frontend_probe_and_watch devices probed ok [ 22.162524] frontend_probe_and_watch watch add ok ok [ 22.162753] frontend_probe_and_watch all done [ 24.707009] xen_bridge: no IPv6 routers present [ 24.712008] vpn_bridge: no IPv6 routers present [ 25.703008] eth0: no IPv6 routers present [ 37.102445] alloc irq_desc for 402 on node 0 [ 37.102450] alloc kstat_irqs on node 0 [ 37.227345] alloc irq_desc for 401 on node 0 [ 37.227349] alloc kstat_irqs on node 0 [ 37.382818] device vif7.0 entered promiscuous mode [ 37.405252] xen_bridge: port 1(vif7.0) entering learning state [ 38.735532] blkback: ring-ref 2047, event-channel 4, protocol 1 (x86_64-abi) [ 38.735779] alloc irq_desc for 400 on node 0 [ 38.735782] alloc kstat_irqs on node 0 [ 38.742213] blkback: ring-ref 2046, event-channel 5, protocol 1 (x86_64-abi) [ 38.742446] alloc irq_desc for 399 on node 0 [ 38.742449] alloc kstat_irqs on node 0 [ 44.938467] alloc irq_desc for 398 on node 0 [ 44.938472] alloc kstat_irqs on node 0 [ 45.093242] alloc irq_desc for 397 on node 0 [ 45.093247] alloc kstat_irqs on node 0 [ 45.202269] frontend_changed: backend/vbd/7/2049: prepare for reconnect [ 45.208102] frontend_changed: backend/vbd/7/2050: prepare for reconnect [ 45.417628] device vif8.0 entered promiscuous mode [ 45.419752] blkback: ring-ref 8, event-channel 8, protocol 1 (x86_64-abi) [ 45.432039] xen_bridge: port 2(vif8.0) entering learning state [ 45.433847] blkback: ring-ref 9, event-channel 9, protocol 1 (x86_64-abi) [ 45.442477] alloc irq_desc for 396 on node 0 [ 45.442481] alloc kstat_irqs on node 0 [ 47.121244] blkback: ring-ref 2047, event-channel 4, protocol 1 (x86_64-abi) [ 47.121522] alloc irq_desc for 395 on node 0 [ 47.121526] alloc kstat_irqs on node 0 [ 47.144550] blkback: ring-ref 2046, event-channel 5, protocol 1 (x86_64-abi) [ 47.144805] alloc irq_desc for 394 on node 0 [ 47.144808] alloc kstat_irqs on node 0 [ 48.335010] vif7.0: no IPv6 routers present [ 52.406012] xen_bridge: port 1(vif7.0) entering forwarding state [ 53.109043] alloc irq_desc for 393 on node 0 [ 53.109048] alloc kstat_irqs on node 0 [ 53.260085] frontend_changed: backend/vbd/8/2049: prepare for reconnect [ 53.272968] frontend_changed: backend/vbd/8/2050: prepare for reconnect [ 53.545577] blkback: ring-ref 8, event-channel 8, protocol 1 (x86_64-abi) [ 53.586296] blkback: ring-ref 9, event-channel 9, protocol 1 (x86_64-abi) [ 53.586549] alloc irq_desc for 392 on node 0 [ 53.586554] alloc kstat_irqs on node 0 [ 53.768996] device vif9.0 entered promiscuous mode [ 53.772943] xen_bridge: port 3(vif9.0) entering learning state [ 54.087825] alloc irq_desc for 391 on node 0 [ 54.087829] alloc kstat_irqs on node 0 [ 55.792514] blkback: ring-ref 2047, event-channel 4, protocol 1 (x86_64-abi) [ 55.792760] alloc irq_desc for 390 on node 0 [ 55.792764] alloc kstat_irqs on node 0 [ 55.804651] blkback: ring-ref 2046, event-channel 5, protocol 1 (x86_64-abi) [ 55.804897] alloc irq_desc for 389 on node 0 [ 55.804901] alloc kstat_irqs on node 0 [ 56.132390] vif8.0: no IPv6 routers present [ 60.433011] xen_bridge: port 2(vif8.0) entering forwarding state [ 62.268736] alloc irq_desc for 388 on node 0 [ 62.268741] alloc kstat_irqs on node 0 [ 62.275606] frontend_changed: backend/vbd/9/2049: prepare for reconnect [ 62.278935] frontend_changed: backend/vbd/9/2050: prepare for reconnect [ 62.499245] blkback: ring-ref 8, event-channel 8, protocol 1 (x86_64-abi) [ 62.513016] blkback: ring-ref 9, event-channel 9, protocol 1 (x86_64-abi) [ 62.543374] alloc irq_desc for 387 on node 0 [ 62.543378] alloc kstat_irqs on node 0 [ 62.861023] alloc irq_desc for 386 on node 0 [ 62.861028] alloc kstat_irqs on node 0 [ 63.256785] device vif10.0 entered promiscuous mode [ 63.262714] xen_bridge: port 4(vif10.0) entering learning state [ 64.149008] vif9.0: no IPv6 routers present [ 65.157330] blkback: ring-ref 2047, event-channel 4, protocol 1 (x86_64-abi) [ 65.157580] alloc irq_desc for 385 on node 0 [ 65.157583] alloc kstat_irqs on node 0 [ 65.197493] blkback: ring-ref 2046, event-channel 5, protocol 1 (x86_64-abi) [ 65.197756] alloc irq_desc for 384 on node 0 [ 65.197760] alloc kstat_irqs on node 0 [ 68.755013] xen_bridge: port 3(vif9.0) entering forwarding state [ 71.207928] frontend_changed: backend/vbd/10/2049: prepare for reconnect [ 71.220911] frontend_changed: backend/vbd/10/2050: prepare for reconnect [ 71.482712] blkback: ring-ref 8, event-channel 8, protocol 1 (x86_64-abi) [ 71.508573] blkback: ring-ref 9, event-channel 9, protocol 1 (x86_64-abi) [ 71.508836] alloc irq_desc for 383 on node 0 [ 71.508839] alloc kstat_irqs on node 0 [ 71.579051] alloc irq_desc for 382 on node 0 [ 71.579055] alloc kstat_irqs on node 0 [ 71.676875] alloc irq_desc for 381 on node 0 [ 71.676880] alloc kstat_irqs on node 0 [ 72.231014] device vif11.0 entered promiscuous mode [ 72.234608] xen_bridge: port 5(vif11.0) entering learning state [ 72.614605] xen_bridge: port 5(vif11.0) entering disabled state [ 72.617268] xen_bridge: port 5(vif11.0) entering disabled state [ 73.667027] vif10.0: no IPv6 routers present [ 74.757811] device vif12.0 entered promiscuous mode [ 74.761984] xen_bridge: port 5(vif12.0) entering learning state [ 74.884753] xen_bridge: port 5(vif12.0) entering disabled state [ 74.887271] xen_bridge: port 5(vif12.0) entering disabled state [ 76.883588] device vif13.0 entered promiscuous mode [ 76.891503] xen_bridge: port 5(vif13.0) entering learning state [ 77.484767] xen_bridge: port 5(vif13.0) entering disabled state [ 77.489290] xen_bridge: port 5(vif13.0) entering disabled state [ 78.263040] xen_bridge: port 4(vif10.0) entering forwarding state